summaryrefslogtreecommitdiffstats
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2018-04-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes and updates for x86: - Address a swiotlb regression which was caused by the recent DMA rework and made driver fail because dma_direct_supported() returned false - Fix a signedness bug in the APIC ID validation which caused invalid APIC IDs to be detected as valid thereby bloating the CPU possible space. - Fix inconsisten config dependcy/select magic for the MFD_CS5535 driver. - Fix a corruption of the physical address space bits when encryption has reduced the address space and late cpuinfo updates overwrite the reduced bit information with the original value. - Dominiks syscall rework which consolidates the architecture specific syscall functions so all syscalls can be wrapped with the same macros. This allows to switch x86/64 to struct pt_regs based syscalls. Extend the clearing of user space controlled registers in the entry patch to the lower registers" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Fix signedness bug in APIC ID validity checks x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption x86/olpc: Fix inconsistent MFD_CS5535 configuration swiotlb: Use dma_direct_supported() for swiotlb_ops syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*() syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention syscalls/core, syscalls/x86: Clean up syscall stub naming convention syscalls/x86: Extend register clearing on syscall entry to lower registers syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64 syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32 syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y x86/syscalls: Don't pointlessly reload the system call number x86/mm: Fix documentation of module mapping range with 4-level paging x86/cpuid: Switch to 'static const' specifier
2018-04-15Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds6-11/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "A few scheduler fixes: - Prevent a bogus warning vs. runqueue clock update flags in do_sched_rt_period_timer() - Simplify the helper functions which handle requests for skipping the runqueue clock updat. - Do not unlock the tunables mutex in the error path of the cpu frequency scheduler utils. Its not held. - Enforce proper alignement for 'struct util_est' in sched_avg to prevent a misalignment fault on IA64" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Force proper alignment of 'struct util_est' sched/core: Simplify helpers for rq clock update skip requests sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning sched/cpufreq/schedutil: Fix error path mutex unlock
2018-04-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds3-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf updates from Thomas Gleixner: "A rather large set of perf updates: Kernel: - Fix various initialization issues - Prevent creating [ku]probes for not CAP_SYS_ADMIN users Tooling: - Show only failing syscalls with 'perf trace --failure' (Arnaldo Carvalho de Melo) e.g: See what 'openat' syscalls are failing: # perf trace --failure -e openat 762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory <SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? > 790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory ^C# - Show information about the event (freq, nr_samples, total period/nr_events) in the annotate --tui and --stdio2 'perf annotate' output, similar to the first line in the 'perf report --tui', but just for the samples for a the annotated symbol (Arnaldo Carvalho de Melo) - Introduce 'perf version --build-options' to show what features were linked, aliased as well as a shorter 'perf -vv' (Jin Yao) - Add a "dso_size" sort order (Kim Phillips) - Remove redundant ')' in the tracepoint output in 'perf trace' (Changbin Du) - Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo Carvalho de Melo) - Show group details on the title line in the annotate browser and 'perf annotate --stdio2' output, so that the per-event columns can have headers (Arnaldo Carvalho de Melo) - Fixup vertical line separating metrics from instructions and cleaning unused lines at the bottom, both in the annotate TUI browser (Arnaldo Carvalho de Melo) - Remove duplicated 'samples' in lost samples warning in 'perf report' (Arnaldo Carvalho de Melo) - Synchronize i915_drm.h, silencing the perf build process, automagically adding support for the new DRM_I915_QUERY ioctl (Arnaldo Carvalho de Melo) - Make auxtrace_queues__add_buffer() allocate struct buffer, from a patchkit already applied (Adrian Hunter) - Fix the --stdio2/TUI annotate output to include group details, be it for a recorded '{a,b,f}' explicit event group or when forcing group display using 'perf report --group' for a set of events not recorded as a group (Arnaldo Carvalho de Melo) - Fix display artifacts in the ui browser (base class for the annotate and main report/top TUI browser) related to the extra title lines work (Arnaldo Carvalho de Melo) - perf auxtrace refactorings, leftovers from a previously partially processed patchset (Adrian Hunter) - Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de Melo) - Synchronize i915_drm.h, silencing a perf build warning and in the process automagically adding support for a new ioctl command (Arnaldo Carvalho de Melo) - Fix a strncpy issue in uprobe tracing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open() tracing/uprobe_event: Fix strncpy corner case perf/core: Fix perf_uprobe_init() perf/core: Fix perf_kprobe_init() perf/core: Fix use-after-free in uprobe_perf_close() perf tests clang: Fix function name for clang IR test perf clang: Add support for recent clang versions perf tools: Fix perf builds with clang support perf tools: No need to include namespaces.h in util.h perf hists browser: Remove leftover from row returned from refresh perf hists browser: Show extra_title_lines in the 'D' debug hotkey perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering tools headers uapi: Synchronize i915_drm.h perf report: Remove duplicated 'samples' in lost samples warning perf ui browser: Fixup cleaning unused lines at the bottom perf annotate browser: Fixup vertical line separating metrics from instructions perf annotate: Show group details on the title line perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer perf/x86/intel: Move regs->flags EXACT bit init perf trace: Remove redundant ')' ...
2018-04-15Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-56/+106
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq affinity fixes from Thomas Gleixner: - Fix error path handling in the affinity spreading code - Make affinity spreading smarter to avoid issues on systems which claim to have hotpluggable CPUs while in fact they can't hotplug anything. So instead of trying to spread the vectors (and thereby the associated device queues) to all possibe CPUs, spread them on all present CPUs first. If there are left over vectors after that first step they are spread among the possible, but not present CPUs which keeps the code backwards compatible for virtual decives and NVME which allocate a queue per possible CPU, but makes the spreading smarter for devices which have less queues than possible or present CPUs. * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Spread irq vectors among present CPUs as far as possible genirq/affinity: Allow irq spreading from a given starting point genirq/affinity: Move actual irq vector spreading into a helper function genirq/affinity: Rename *node_to_possible_cpumask as *node_to_cpumask genirq/affinity: Don't return with empty affinity masks on error
2018-04-13kernel/kexec_file.c: allow archs to set purgatory load addressPhilipp Rudo1-13/+16
For s390 new kernels are loaded to fixed addresses in memory before they are booted. With the current code this is a problem as it assumes the kernel will be loaded to an 'arbitrary' address. In particular, kexec_locate_mem_hole searches for a large enough memory region and sets the load address (kexec_bufer->mem) to it. Luckily there is a simple workaround for this problem. By returning 1 in arch_kexec_walk_mem, kexec_locate_mem_hole is turned off. This allows the architecture to set kbuf->mem by hand. While the trick works fine for the kernel it does not for the purgatory as here the architectures don't have access to its kexec_buffer. Give architectures access to the purgatories kexec_buffer by changing kexec_load_purgatory to take a pointer to it. With this change architectures have access to the buffer and can edit it as they need. A nice side effect of this change is that we can get rid of the purgatory_info->purgatory_load_address field. As now the information stored there can directly be accessed from kbuf->mem. Link: http://lkml.kernel.org/r/20180321112751.22196-11-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory loadPhilipp Rudo1-30/+7
The current code uses the sh_offset field in purgatory_info->sechdrs to store a pointer to the current load address of the section. Depending whether the section will be loaded or not this is either a pointer into purgatory_info->purgatory_buf or kexec_purgatory. This is not only a violation of the ELF standard but also makes the code very hard to understand as you cannot tell if the memory you are using is read-only or not. Remove this misuse and store the offset of the section in pugaroty_info->purgatory_buf in sh_offset. Link: http://lkml.kernel.org/r/20180321112751.22196-10-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrsPhilipp Rudo1-22/+12
The main loop currently uses quite a lot of variables to update the section headers. Some of them are unnecessary. So clean them up a little. Link: http://lkml.kernel.org/r/20180321112751.22196-9-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrsPhilipp Rudo1-46/+30
To update the entry point there is an extra loop over all section headers although this can be done in the main loop. So move it there and eliminate the extra loop and variable to store the 'entry section index'. Also, in the main loop, move the usual case, i.e. non-bss section, out of the extra if-block. Link: http://lkml.kernel.org/r/20180321112751.22196-8-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: split up __kexec_load_puragoryPhilipp Rudo1-97/+103
When inspecting __kexec_load_purgatory you find that it has two tasks 1) setting up the kexec_buffer for the new kernel and, 2) setting up pi->sechdrs for the final load address. The two tasks are independent of each other. To improve readability split up __kexec_load_purgatory into two functions, one for each task, and call them directly from kexec_load_purgatory. Link: http://lkml.kernel.org/r/20180321112751.22196-7-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations*Philipp Rudo1-21/+42
When the relocations are applied to the purgatory only the section the relocations are applied to is writable. The other sections, i.e. the symtab and .rel/.rela, are in read-only kexec_purgatory. Highlight this by marking the corresponding variables as 'const'. While at it also change the signatures of arch_kexec_apply_relocations* to take section pointers instead of just the index of the relocation section. This removes the second lookup and sanity check of the sections in arch code. Link: http://lkml.kernel.org/r/20180321112751.22196-6-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: search symbols in read-only kexec_purgatoryPhilipp Rudo1-16/+22
The stripped purgatory does not contain a symtab. So when looking for symbols this is done in read-only kexec_purgatory. Highlight this by marking the corresponding variables as 'const'. Link: http://lkml.kernel.org/r/20180321112751.22196-5-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: make purgatory_info->ehdr constPhilipp Rudo1-2/+2
The kexec_purgatory buffer is read-only. Thus all pointers into kexec_purgatory are read-only, too. Point this out by explicitly marking purgatory_info->ehdr as 'const' and update the comments in purgatory_info. Link: http://lkml.kernel.org/r/20180321112751.22196-4-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kernel/kexec_file.c: remove checks in kexec_purgatory_loadPhilipp Rudo1-14/+0
Before the purgatory is loaded several checks are done whether the ELF file in kexec_purgatory is valid or not. These checks are incomplete. For example they don't check for the total size of the sections defined in the section header table or if the entry point actually points into the purgatory. On the other hand the purgatory, although an ELF file on its own, is part of the kernel. Thus not trusting the purgatory means not trusting the kernel build itself. So remove all validity checks on the purgatory and just trust the kernel build. Link: http://lkml.kernel.org/r/20180321112751.22196-3-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kexec_file, x86: move re-factored code to generic sideAKASHI Takahiro1-0/+175
In the previous patches, commonly-used routines, exclude_mem_range() and prepare_elf64_headers(), were carved out. Now place them in kexec common code. A prefix "crash_" is given to each of their names to avoid possible name collisions. Link: http://lkml.kernel.org/r/20180306102303.9063-8-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kexec_file,x86,powerpc: factor out kexec_file_ops functionsAKASHI Takahiro1-4/+56
As arch_kexec_kernel_image_{probe,load}(), arch_kimage_file_post_load_cleanup() and arch_kexec_kernel_verify_sig() are almost duplicated among architectures, they can be commonalized with an architecture-defined kexec_file_ops array. So let's factor them out. Link: http://lkml.kernel.org/r/20180306102303.9063-3-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kexec_file: make use of purgatory optionalAKASHI Takahiro1-0/+5
Patch series "kexec_file, x86, powerpc: refactoring for other architecutres", v2. This is a preparatory patchset for adding kexec_file support on arm64. It was originally included in a arm64 patch set[1], but Philipp is also working on their kexec_file support on s390[2] and some changes are now conflicting. So these common parts were extracted and put into a separate patch set for better integration. What's more, my original patch#4 was split into a few small chunks for easier review after Dave's comment. As such, the resulting code is basically identical with my original, and the only *visible* differences are: - renaming of _kexec_kernel_image_probe() and _kimage_file_post_load_cleanup() - change one of types of arguments at prepare_elf64_headers() Those, unfortunately, require a couple of trivial changes on the rest (#1, #6 to #13) of my arm64 kexec_file patch set[1]. Patch #1 allows making a use of purgatory optional, particularly useful for arm64. Patch #2 commonalizes arch_kexec_kernel_{image_probe, image_load, verify_sig}() and arch_kimage_file_post_load_cleanup() across architectures. Patches #3-#7 are also intended to generalize parse_elf64_headers(), along with exclude_mem_range(), to be made best re-use of. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-February/561182.html [2] http://lkml.iu.edu//hypermail/linux/kernel/1802.1/02596.html This patch (of 7): On arm64, crash dump kernel's usable memory is protected by *unmapping* it from kernel virtual space unlike other architectures where the region is just made read-only. It is highly unlikely that the region is accidentally corrupted and this observation rationalizes that digest check code can also be dropped from purgatory. The resulting code is so simple as it doesn't require a bit ugly re-linking/relocation stuff, i.e. arch_kexec_apply_relocations_add(). Please see: http://lists.infradead.org/pipermail/linux-arm-kernel/2017-December/545428.html All that the purgatory does is to shuffle arguments and jump into a new kernel, while we still need to have some space for a hash value (purgatory_sha256_digest) which is never checked against. As such, it doesn't make sense to have trampline code between old kernel and new kernel on arm64. This patch introduces a new configuration, ARCH_HAS_KEXEC_PURGATORY, and allows related code to be compiled in only if necessary. [takahiro.akashi@linaro.org: fix trivial screwup] Link: http://lkml.kernel.org/r/20180309093346.GF25863@linaro.org Link: http://lkml.kernel.org/r/20180306102303.9063-2-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Dave Young <dyoung@redhat.com> Tested-by: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13kexec: export PG_swapbacked to VMCOREINFOPetr Tesarik1-0/+1
Since commit 6326fec1122c ("mm: Use owner_priv bit for PageSwapCache, valid when PageSwapBacked"), PG_swapcache is an alias for PG_owner_priv_1, which may be also used for other purposes. To know whether the bit indeed has the PG_swapcache meaning, it is necessary to check PG_swapbacked, hence this bit must be exported. Link: http://lkml.kernel.org/r/20180410161345.142e142d@ezekiel.suse.cz Signed-off-by: Petr Tesarik <ptesarik@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Young <dyoung@redhat.com> Cc: Xunlei Pang <xlpang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: "Marc-Andr Lureau" <marcandre.lureau@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-13resource: fix integer overflow at reallocationTakashi Iwai1-1/+2
We've got a bug report indicating a kernel panic at booting on an x86-32 system, and it turned out to be the invalid PCI resource assigned after reallocation. __find_resource() first aligns the resource start address and resets the end address with start+size-1 accordingly, then checks whether it's contained. Here the end address may overflow the integer, although resource_contains() still returns true because the function validates only start and end address. So this ends up with returning an invalid resource (start > end). There was already an attempt to cover such a problem in the commit 47ea91b4052d ("Resource: fix wrong resource window calculation"), but this case is an overseen one. This patch adds the validity check of the newly calculated resource for avoiding the integer overflow problem. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1086739 Link: http://lkml.kernel.org/r/s5hpo37d5l8.wl-tiwai@suse.de Fixes: 23c570a67448 ("resource: ability to resize an allocated resource") Signed-off-by: Takashi Iwai <tiwai@suse.de> Reported-by: Michael Henders <hendersm@shaw.ca> Tested-by: Michael Henders <hendersm@shaw.ca> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-12Merge tag 'trace-v4.17-2' of ↵Linus Torvalds2-34/+15
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "A few clean ups and bug fixes: - replace open coded "ARRAY_SIZE()" with macro - updates to uprobes - bug fix for perf event filter on error path" * tag 'trace-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Enforce passing in filter=NULL to create_filter() trace_uprobe: Simplify probes_seq_show() trace_uprobe: Use %lx to display offset tracing/uprobe: Add support for overlayfs tracing: Use ARRAY_SIZE() macro instead of open coding it
2018-04-12Merge tag 'for_linus-4.16' of ↵Linus Torvalds4-55/+44
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull kdb updates from Jason Wessel: - fix 2032 time access issues and new compiler warnings - minor regression test cleanup - formatting fixes for end user use of kdb * tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kdb: use memmove instead of overlapping memcpy kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts() kdb: bl: don't use tab character in output kdb: drop newline in unknown command output kdb: make "mdr" command repeat kdb: use __ktime_get_real_seconds instead of __current_kernel_time misc: kgdbts: Display progress of asynchronous tests
2018-04-12perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open()Song Liu1-0/+8
Non-root user cannot create kprobe or uprobe through the text-based interface (kprobe_events, uprobe_events),so they should not be able to create probes via perf_event_open() either. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Song Liu <songliubraving@fb.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 33ea4b24277b ("perf/core: Implement the 'perf_uprobe' PMU") Fixes: e12f03d7031a ("perf/core: Implement the 'perf_kprobe' PMU") Link: http://lkml.kernel.org/r/C0B2EFB5-C403-4BDB-9046-C14B3EE66999@fb.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-11Merge tag 'pm-4.17-rc1-2' of ↵Linus Torvalds6-88/+271
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These include one big-ticket item which is the rework of the idle loop in order to prevent CPUs from spending too much time in shallow idle states. It reduces idle power on some systems by 10% or more and may improve performance of workloads in which the idle loop overhead matters. This has been in the works for several weeks and it has been tested and reviewed quite thoroughly. Also included are changes that finalize the cpufreq cleanup moving frequency table validation from drivers to the core, a few fixes and cleanups of cpufreq drivers, a cpuidle documentation update and a PM QoS core update to mark the expected switch fall-throughs in it. Specifics: - Rework the idle loop in order to prevent CPUs from spending too much time in shallow idle states by making it stop the scheduler tick before putting the CPU into an idle state only if the idle duration predicted by the idle governor is long enough. That required the code to be reordered to invoke the idle governor before stopping the tick, among other things (Rafael Wysocki, Frederic Weisbecker, Arnd Bergmann). - Add the missing description of the residency sysfs attribute to the cpuidle documentation (Prashanth Prakash). - Finalize the cpufreq cleanup moving frequency table validation from drivers to the core (Viresh Kumar). - Fix a clock leak regression in the armada-37xx cpufreq driver (Gregory Clement). - Fix the initialization of the CPU performance data structures for shared policies in the CPPC cpufreq driver (Shunyong Yang). - Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a bit (Viresh Kumar, Rafael Wysocki). - Mark the expected switch fall-throughs in the PM QoS core (Gustavo Silva)" * tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) tick-sched: avoid a maybe-uninitialized warning cpufreq: Drop cpufreq_table_validate_and_show() cpufreq: SCMI: Don't validate the frequency table twice cpufreq: CPPC: Initialize shared perf capabilities of CPUs cpufreq: armada-37xx: Fix clock leak cpufreq: CPPC: Don't set transition_latency cpufreq: ti-cpufreq: Use builtin_platform_driver() cpufreq: intel_pstate: Do not include debugfs.h PM / QoS: mark expected switch fall-throughs cpuidle: Add definition of residency to sysfs documentation time: hrtimer: Use timerqueue_iterate_next() to get to the next timer nohz: Avoid duplication of code related to got_idle_tick nohz: Gather tick_sched booleans under a common flag field cpuidle: menu: Avoid selecting shallow states with stopped tick cpuidle: menu: Refine idle state selection for running tick sched: idle: Select idle state before stopping the tick time: hrtimer: Introduce hrtimer_next_event_without() time: tick-sched: Split tick_nohz_stop_sched_tick() cpuidle: Return nohz hint from cpuidle_select() jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC ...
2018-04-11xarray: add the xa_lock to the radix_tree_rootMatthew Wilcox1-1/+1
This results in no change in structure size on 64-bit machines as it fits in the padding between the gfp_t and the void *. 32-bit machines will grow the structure from 8 to 12 bytes. Almost all radix trees are protected with (at least) a spinlock, so as they are converted from radix trees to xarrays, the data structures will shrink again. Initialising the spinlock requires a name for the benefit of lockdep, so RADIX_TREE_INIT() now needs to know the name of the radix tree it's initialising, and so do IDR_INIT() and IDA_INIT(). Also add the xa_lock() and xa_unlock() family of wrappers to make it easier to use the lock. If we could rely on -fplan9-extensions in the compiler, we could avoid all of this syntactic sugar, but that wasn't added until gcc 4.6. Link: http://lkml.kernel.org/r/20180313132639.17387-8-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11kernel/sysctl.c: add kdoc comments to do_proc_do{u}intvec_minmax_conv_paramWaiman Long1-2/+20
Kdoc comments are added to the do_proc_dointvec_minmax_conv_param and do_proc_douintvec_minmax_conv_param structures thare are used internally for range checking. The error codes returned by proc_dointvec_minmax() and proc_douintvec_minmax() are also documented. Link: http://lkml.kernel.org/r/1519926220-7453-3-git-send-email-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11kernel/params.c: downgrade warning for unsafe parametersChris Wilson1-2/+2
As using an unsafe module parameter is, by its very definition, an expected user action, emitting a warning is overkill. Nothing has yet gone wrong, and we add a taint flag for any future oops should something actually go wrong. So instead of having a user controllable pr_warn, downgrade it to a pr_notice for "a normal, but significant condition". We make use of unsafe kernel parameters in igt (https://cgit.freedesktop.org/drm/igt-gpu-tools/) (we have not yet succeeded in removing all such debugging options), which generates a warning and taints the kernel. The warning is unhelpful as we then need to filter it out again as we check that every test themselves do not provoke any kernel warnings. Link: http://lkml.kernel.org/r/20180226151919.9674-1-chris@chris-wilson.co.uk Fixes: 91f9d330cc14 ("module: make it possible to have unsafe, tainting module params") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jean Delvare <khali@linux-fr.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Petri Latvala <petri.latvala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11kernel/sysctl.c: fix sizeof argument to match variable nameRandy Dunlap1-1/+1
Fix sizeof argument to be the same as the data variable name. Probably a copy/paste error. Mostly harmless since both variables are unsigned int. Fixes kernel bugzilla #197371: Possible access to unintended variable in "kernel/sysctl.c" line 1339 https://bugzilla.kernel.org/show_bug.cgi?id=197371 Link: http://lkml.kernel.org/r/e0d0531f-361e-ef5f-8499-32743ba907e1@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Petru Mihancea <petrum@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11uts: create "struct uts_namespace" from kmem_cacheAlexey Dobriyan1-4/+16
So "struct uts_namespace" can enjoy fine-grained SLAB debugging and usercopy protection. I'd prefer shorter name "utsns" but there is "user_namespace" already. Link: http://lkml.kernel.org/r/20180228215158.GA23146@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11taint: add taint for randstructKees Cook1-1/+3
Since the randstruct plugin can intentionally produce extremely unusual kernel structure layouts (even performance pathological ones), some maintainers want to be able to trivially determine if an Oops is coming from a randstruct-built kernel, so as to keep their sanity when debugging. This adds the new flag and initializes taint_mask immediately when built with randstruct. Link: http://lkml.kernel.org/r/1519084390-43867-4-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11taint: consolidate documentationKees Cook1-19/+4
This consolidates the taint bit documentation into a single place with both numeric and letter values. Additionally adds the missing TAINT_AUX documentation. Link: http://lkml.kernel.org/r/1519084390-43867-3-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11taint: convert to indexed initializationKees Cook1-17/+19
This converts to using indexed initializers instead of comments, adds a comment on why the taint flags can't be an enum, and make sure that no one forgets to update the taint_flags when adding new bits. Link: http://lkml.kernel.org/r/1519084390-43867-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11tracing: Enforce passing in filter=NULL to create_filter()Steven Rostedt (VMware)1-14/+10
There's some inconsistency with what to set the output parameter filterp when passing to create_filter(..., struct event_filter **filterp). Whatever filterp points to, should be NULL when calling this function. The create_filter() calls create_filter_start() with a pointer to a local "filter" variable that is set to NULL. The create_filter_start() has a WARN_ON() if the passed in pointer isn't pointing to a value set to NULL. Ideally, create_filter() should pass the filterp variable it received to create_filter_start() and not hide it as with a local variable, this allowed create_filter() to fail, and not update the passed in filter, and the caller of create_filter() then tried to free filter, which was never initialized to anything, causing memory corruption. Link: http://lkml.kernel.org/r/00000000000032a0c30569916870@google.com Fixes: 80765597bc587 ("tracing: Rewrite filter logic to be simpler and faster") Reported-by: syzbot+dadcc936587643d7f568@syzkaller.appspotmail.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-11trace_uprobe: Simplify probes_seq_show()Ravi Bangoria1-18/+3
Simplify probes_seq_show() function. No change in output before and after patch. Link: http://lkml.kernel.org/r/20180315082756.9050-2-ravi.bangoria@linux.vnet.ibm.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-11trace_uprobe: Use %lx to display offsetRavi Bangoria1-1/+1
tu->offset is unsigned long, not a pointer, thus %lx should be used to print it, not the %px. Link: http://lkml.kernel.org/r/20180315082756.9050-1-ravi.bangoria@linux.vnet.ibm.com Cc: stable@vger.kernel.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 0e4d819d0893 ("trace_uprobe: Display correct offset in uprobe_events") Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-11tracing/uprobe: Add support for overlayfsHoward McLauchlan1-1/+1
uprobes cannot successfully attach to binaries located in a directory mounted with overlayfs. To verify, create directories for mounting overlayfs (upper,lower,work,merge), move some binary into merge/ and use readelf to obtain some known instruction of the binary. I used /bin/true and the entry instruction(0x13b0): $ mount -t overlay overlay -o lowerdir=lower,upperdir=upper,workdir=work merge $ cd /sys/kernel/debug/tracing $ echo 'p:true_entry PATH_TO_MERGE/merge/true:0x13b0' > uprobe_events $ echo 1 > events/uprobes/true_entry/enable This returns 'bash: echo: write error: Input/output error' and dmesg tells us 'event trace: Could not enable event true_entry' This change makes create_trace_uprobe() look for the real inode of a dentry. In the case of normal filesystems, this simplifies to just returning the inode. In the case of overlayfs(and similar fs) we will obtain the underlying dentry and corresponding inode, upon which uprobes can successfully register. Running the example above with the patch applied, we can see that the uprobe is enabled and will output to trace as expected. Link: http://lkml.kernel.org/r/20180410231030.2720-1-hmclauchlan@fb.com Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-11tracing: Use ARRAY_SIZE() macro instead of open coding itJérémy Lefaure1-1/+1
It is useless to re-invent the ARRAY_SIZE macro so let's use it instead of DATA_CNT. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Link: http://lkml.kernel.org/r/20171016012250.26453-1-jeremy.lefaure@lse.epita.fr Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> [ Removed useless include of kernel.h ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-11Merge branches 'pm-cpuidle' and 'pm-qos'Rafael J. Wysocki6-88/+271
* pm-cpuidle: tick-sched: avoid a maybe-uninitialized warning cpuidle: Add definition of residency to sysfs documentation time: hrtimer: Use timerqueue_iterate_next() to get to the next timer nohz: Avoid duplication of code related to got_idle_tick nohz: Gather tick_sched booleans under a common flag field cpuidle: menu: Avoid selecting shallow states with stopped tick cpuidle: menu: Refine idle state selection for running tick sched: idle: Select idle state before stopping the tick time: hrtimer: Introduce hrtimer_next_event_without() time: tick-sched: Split tick_nohz_stop_sched_tick() cpuidle: Return nohz hint from cpuidle_select() jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC sched: idle: Do not stop the tick before cpuidle_idle_call() sched: idle: Do not stop the tick upfront in the idle loop time: tick-sched: Reorganize idle tick management code * pm-qos: PM / QoS: mark expected switch fall-throughs
2018-04-10Merge tag 'trace-v4.17' of ↵Linus Torvalds13-1692/+5828
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "New features: - Tom Zanussi's extended histogram work. This adds the synthetic events to have histograms from multiple event data Adds triggers "onmatch" and "onmax" to call the synthetic events Several updates to the histogram code from this - Allow way to nest ring buffer calls in the same context - Allow absolute time stamps in ring buffer - Rewrite of filter code parsing based on Al Viro's suggestions - Setting of trace_clock to global if TSC is unstable (on boot) - Better OOM handling when allocating large ring buffers - Added initcall tracepoints (consolidated initcall_debug code with them) And other various fixes and clean ups" * tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits) init: Have initcall_debug still work without CONFIG_TRACEPOINTS init, tracing: Have printk come through the trace events for initcall_debug init, tracing: instrument security and console initcall trace events init, tracing: Add initcall trace events tracing: Add rcu dereference annotation for test func that touches filter->prog tracing: Add rcu dereference annotation for filter->prog tracing: Fixup logic inversion on setting trace_global_clock defaults tracing: Hide global trace clock from lockdep ring-buffer: Add set/clear_current_oom_origin() during allocations ring-buffer: Check if memory is available before allocation lockdep: Add print_irqtrace_events() to __warn vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK) tracing: Uninitialized variable in create_tracing_map_fields() tracing: Make sure variable string fields are NULL-terminated tracing: Add action comparisons when testing matching hist triggers tracing: Don't add flag strings when displaying variable references tracing: Fix display of hist trigger expressions containing timestamps ftrace: Drop a VLA in module_exists() tracing: Mention trace_clock=global when warning about unstable clocks tracing: Default to using trace_global_clock if sched_clock is unstable ...
2018-04-10tracing/uprobe_event: Fix strncpy corner caseMasami Hiramatsu1-0/+2
Fix string fetch function to terminate with NUL. It is OK to drop the rest of string. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: security@kernel.org Cc: 范龙飞 <long7573@126.com> Fixes: 5baaa59ef09e ("tracing/probes: Implement 'memory' fetch method for uprobes") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-10tick-sched: avoid a maybe-uninitialized warningArnd Bergmann1-3/+6
The use of bitfields seems to confuse gcc, leading to a false-positive warning in all compiler versions: kernel/time/tick-sched.c: In function 'tick_nohz_idle_exit': kernel/time/tick-sched.c:538:2: error: 'now' may be used uninitialized in this function [-Werror=maybe-uninitialized] This introduces a temporary variable to track the flags so gcc doesn't have to evaluate twice, eliminating the code path that leads to the warning. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85301 Fixes: 1cae544d42d2 ("nohz: Gather tick_sched booleans under a common flag field") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-10perf/core: Fix perf_uprobe_init()Song Liu1-0/+2
Similarly to the uprobe PMU fix in perf_kprobe_init(), fix error handling in perf_uprobe_init() as well. Reported-by: 范龙飞 <long7573@126.com> Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: e12f03d7031a ("perf/core: Implement the 'perf_kprobe' PMU") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-10perf/core: Fix perf_kprobe_init()Masami Hiramatsu1-0/+2
Fix error handling in perf_kprobe_init(): ================================================================== BUG: KASAN: slab-out-of-bounds in strlen+0x8e/0xa0 lib/string.c:482 Read of size 1 at addr ffff88003f9cc5c0 by task syz-executor2/23095 CPU: 0 PID: 23095 Comm: syz-executor2 Not tainted 4.16.0+ #24 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6e/0x2c0 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x256/0x380 mm/kasan/report.c:412 strlen+0x8e/0xa0 lib/string.c:482 kstrdup+0x21/0x70 mm/util.c:55 alloc_trace_kprobe+0xc8/0x930 kernel/trace/trace_kprobe.c:325 create_local_trace_kprobe+0x4f/0x3a0 kernel/trace/trace_kprobe.c:1438 perf_kprobe_init+0x149/0x1f0 kernel/trace/trace_event_perf.c:264 perf_kprobe_event_init+0xa8/0x120 kernel/events/core.c:8407 perf_try_init_event+0xcb/0x2a0 kernel/events/core.c:9719 perf_init_event kernel/events/core.c:9750 [inline] perf_event_alloc+0x1367/0x1e20 kernel/events/core.c:10022 SYSC_perf_event_open+0x242/0x2330 kernel/events/core.c:10477 do_syscall_64+0x198/0x640 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Reported-by: 范龙飞 <long7573@126.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: e12f03d7031a ("perf/core: Implement the 'perf_kprobe' PMU") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-14/+22
Pull networking fixes from David Miller: 1) The sockmap code has to free socket memory on close if there is corked data, from John Fastabend. 2) Tunnel names coming from userspace need to be length validated. From Eric Dumazet. 3) arp_filter() has to take VRFs properly into account, from Miguel Fadon Perlines. 4) Fix oops in error path of tcf_bpf_init(), from Davide Caratti. 5) Missing idr_remove() in u32_delete_key(), from Cong Wang. 6) More syzbot stuff. Several use of uninitialized value fixes all over, from Eric Dumazet. 7) Do not leak kernel memory to userspace in sctp, also from Eric Dumazet. 8) Discard frames from unused ports in DSA, from Andrew Lunn. 9) Fix DMA mapping and reset/failover problems in ibmvnic, from Thomas Falcon. 10) Do not access dp83640 PHY registers prematurely after reset, from Esben Haabendal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) vhost-net: set packet weight of tx polling to 2 * vq size net: thunderx: rework mac addresses list to u64 array inetpeer: fix uninit-value in inet_getpeer dp83640: Ensure against premature access to PHY registers after reset devlink: convert occ_get op to separate registration ARM: dts: ls1021a: Specify TBIPA register address net/fsl_pq_mdio: Allow explicit speficition of TBIPA address ibmvnic: Do not reset CRQ for Mobility driver resets ibmvnic: Fix failover case for non-redundant configuration ibmvnic: Fix reset scheduler error handling ibmvnic: Zero used TX descriptor counter on reset ibmvnic: Fix DMA mapping mistakes tipc: use the right skb in tipc_sk_fill_sock_diag() sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6 net: dsa: Discard frames from unused ports sctp: do not leak kernel memory to user space soreuseport: initialise timewait reuseport field ipv4: fix uninit-value in ip_route_output_key_hash_rcu() dccp: initialize ireq->ir_mark net: fix uninit-value in __hw_addr_add_ex() ...
2018-04-09perf/core: Fix use-after-free in uprobe_perf_close()Prashant Bhole1-0/+6
A use-after-free bug was caught by KASAN while running usdt related code (BCC project. bcc/tests/python/test_usdt2.py): ================================================================== BUG: KASAN: use-after-free in uprobe_perf_close+0x222/0x3b0 Read of size 4 at addr ffff880384f9b4a4 by task test_usdt2.py/870 CPU: 4 PID: 870 Comm: test_usdt2.py Tainted: G W 4.16.0-next-20180409 #215 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0xc7/0x15b ? show_regs_print_info+0x5/0x5 ? printk+0x9c/0xc3 ? kmsg_dump_rewind_nolock+0x6e/0x6e ? uprobe_perf_close+0x222/0x3b0 print_address_description+0x83/0x3a0 ? uprobe_perf_close+0x222/0x3b0 kasan_report+0x1dd/0x460 ? uprobe_perf_close+0x222/0x3b0 uprobe_perf_close+0x222/0x3b0 ? probes_open+0x180/0x180 ? free_filters_list+0x290/0x290 trace_uprobe_register+0x1bb/0x500 ? perf_event_attach_bpf_prog+0x310/0x310 ? probe_event_disable+0x4e0/0x4e0 perf_uprobe_destroy+0x63/0xd0 _free_event+0x2bc/0xbd0 ? lockdep_rcu_suspicious+0x100/0x100 ? ring_buffer_attach+0x550/0x550 ? kvm_sched_clock_read+0x1a/0x30 ? perf_event_release_kernel+0x3e4/0xc00 ? __mutex_unlock_slowpath+0x12e/0x540 ? wait_for_completion+0x430/0x430 ? lock_downgrade+0x3c0/0x3c0 ? lock_release+0x980/0x980 ? do_raw_spin_trylock+0x118/0x150 ? do_raw_spin_unlock+0x121/0x210 ? do_raw_spin_trylock+0x150/0x150 perf_event_release_kernel+0x5d4/0xc00 ? put_event+0x30/0x30 ? fsnotify+0xd2d/0xea0 ? sched_clock_cpu+0x18/0x1a0 ? __fsnotify_update_child_dentry_flags.part.0+0x1b0/0x1b0 ? pvclock_clocksource_read+0x152/0x2b0 ? pvclock_read_flags+0x80/0x80 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock_cpu+0x18/0x1a0 ? pvclock_clocksource_read+0x152/0x2b0 ? locks_remove_file+0xec/0x470 ? pvclock_read_flags+0x80/0x80 ? fcntl_setlk+0x880/0x880 ? ima_file_free+0x8d/0x390 ? lockdep_rcu_suspicious+0x100/0x100 ? ima_file_check+0x110/0x110 ? fsnotify+0xea0/0xea0 ? kvm_sched_clock_read+0x1a/0x30 ? rcu_note_context_switch+0x600/0x600 perf_release+0x21/0x40 __fput+0x264/0x620 ? fput+0xf0/0xf0 ? do_raw_spin_unlock+0x121/0x210 ? do_raw_spin_trylock+0x150/0x150 ? SyS_fchdir+0x100/0x100 ? fsnotify+0xea0/0xea0 task_work_run+0x14b/0x1e0 ? task_work_cancel+0x1c0/0x1c0 ? copy_fd_bitmaps+0x150/0x150 ? vfs_read+0xe5/0x260 exit_to_usermode_loop+0x17b/0x1b0 ? trace_event_raw_event_sys_exit+0x1a0/0x1a0 do_syscall_64+0x3f6/0x490 ? syscall_return_slowpath+0x2c0/0x2c0 ? lockdep_sys_exit+0x1f/0xaa ? syscall_return_slowpath+0x1a3/0x2c0 ? lockdep_sys_exit+0x1f/0xaa ? prepare_exit_to_usermode+0x11c/0x1e0 ? enter_from_user_mode+0x30/0x30 random: crng init done ? __put_user_4+0x1c/0x30 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7f41d95f9340 RSP: 002b:00007fffe71e4268 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 000000000000000d RCX: 00007f41d95f9340 RDX: 0000000000000000 RSI: 0000000000002401 RDI: 000000000000000d RBP: 0000000000000000 R08: 00007f41ca8ff700 R09: 00007f41d996dd1f R10: 00007fffe71e41e0 R11: 0000000000000246 R12: 00007fffe71e4330 R13: 0000000000000000 R14: fffffffffffffffc R15: 00007fffe71e4290 Allocated by task 870: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_node+0x11a/0x430 copy_process.part.19+0x11a0/0x41c0 _do_fork+0x1be/0xa20 do_syscall_64+0x198/0x490 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Freed by task 0: __kasan_slab_free+0x12e/0x180 kmem_cache_free+0x102/0x4d0 free_task+0xfe/0x160 __put_task_struct+0x189/0x290 delayed_put_task_struct+0x119/0x250 rcu_process_callbacks+0xa6c/0x1b60 __do_softirq+0x238/0x7ae The buggy address belongs to the object at ffff880384f9b480 which belongs to the cache task_struct of size 12928 It occurs because task_struct is freed before perf_event which refers to the task and task flags are checked while teardown of the event. perf_event_alloc() assigns task_struct to hw.target of perf_event, but there is no reference counting for it. As a fix we get_task_struct() in perf_event_alloc() at above mentioned assignment and put_task_struct() in _free_event(). Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 63b6da39bb38e8f1a1ef3180d32a39d6 ("perf: Fix perf_event_exit_task() race") Link: http://lkml.kernel.org/r/20180409100346.6416-1-bhole_prashant_q7@lab.ntt.co.jp Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-09PM / QoS: mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-09time: hrtimer: Use timerqueue_iterate_next() to get to the next timerRafael J. Wysocki1-3/+1
Use timerqueue_iterate_next() to get to the next timer in __hrtimer_next_event_base() without browsing the timerqueue details diredctly. No intentional changes in functionality. Suggested-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-09nohz: Avoid duplication of code related to got_idle_tickRafael J. Wysocki1-10/+6
Move the code setting ts->got_idle_tick into tick_sched_do_timer() to avoid code duplication. No intentional changes in functionality. Suggested-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2018-04-09nohz: Gather tick_sched booleans under a common flag fieldFrederic Weisbecker2-9/+15
Optimize the space and leave plenty of room for further flags. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> [ rjw: Do not use __this_cpu_read() to access tick_stopped and add got_idle_tick to avoid overloading inidle ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-09cpuidle: menu: Refine idle state selection for running tickRafael J. Wysocki1-6/+6
If the tick isn't stopped, the target residency of the state selected by the menu governor may be greater than the actual time to the next tick and that means lost energy. To avoid that, make tick_nohz_get_sleep_length() return the current time to the next event (before stopping the tick) in addition to the estimated one via an extra pointer argument and make menu_select() use that value to refine the state selection when necessary. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2018-04-09sched: idle: Select idle state before stopping the tickRafael J. Wysocki3-17/+57
In order to address the issue with short idle duration predictions by the idle governor after the scheduler tick has been stopped, reorder the code in cpuidle_idle_call() so that the governor idle state selection runs before tick_nohz_idle_go_idle() and use the "nohz" hint returned by cpuidle_select() to decide whether or not to stop the tick. This isn't straightforward, because menu_select() invokes tick_nohz_get_sleep_length() to get the time to the next timer event and the number returned by the latter comes from __tick_nohz_idle_stop_tick(). Fortunately, however, it is possible to compute that number without actually stopping the tick and with the help of the existing code. Namely, tick_nohz_get_sleep_length() can be made call tick_nohz_next_event(), introduced earlier, to get the time to the next non-highres timer event. If that happens, tick_nohz_next_event() need not be called by __tick_nohz_idle_stop_tick() again. If it turns out that the scheduler tick cannot be stopped going forward or the next timer event is too close for the tick to be stopped, tick_nohz_get_sleep_length() can simply return the time to the next event currently programmed into the corresponding clock event device. In addition to knowing the return value of tick_nohz_next_event(), however, tick_nohz_get_sleep_length() needs to know the time to the next highres timer event, but with the scheduler tick timer excluded, which can be computed with the help of hrtimer_get_next_event(). That minimum of that number and the tick_nohz_next_event() return value is the total time to the next timer event with the assumption that the tick will be stopped. It can be returned to the idle governor which can use it for predicting idle duration (under the assumption that the tick will be stopped) and deciding whether or not it makes sense to stop the tick before putting the CPU into the selected idle state. With the above, the sleep_length field in struct tick_sched is not necessary any more, so drop it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199227 Reported-by: Doug Smythies <dsmythies@telus.net> Reported-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2018-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-14/+22
Daniel Borkmann says: ==================== pull-request: bpf 2018-04-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Two sockmap fixes: i) fix a potential warning when a socket with pending cork data is closed by freeing the memory right when the socket is closed instead of seeing still outstanding memory at garbage collector time, ii) fix a NULL pointer deref in case of duplicates release calls, so make sure to only reset the sk_prot pointer when it's in a valid state to do so, both from John. 2) Fix a compilation warning in bpf_prog_attach_check_attach_type() by moving the function under CONFIG_CGROUP_BPF ifdef since only used there, from Anders. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>