summaryrefslogtreecommitdiffstats
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2022-10-16Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds7-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-14Merge tag 'sched-psi-2022-10-14' of ↵Linus Torvalds4-83/+308
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull PSI updates from Ingo Molnar: - Various performance optimizations, resulting in a 4%-9% speedup in the mmtests/config-scheduler-perfpipe micro-benchmark. - New interface to turn PSI on/off on a per cgroup level. * tag 'sched-psi-2022-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/psi: Per-cgroup PSI accounting disable/re-enable interface sched/psi: Cache parent psi_group to speed up group iteration sched/psi: Consolidate cgroup_psi() sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure sched/psi: Remove NR_ONCPU task accounting sched/psi: Optimize task switch inside shared cgroups again sched/psi: Move private helpers to sched/stats.h sched/psi: Save percpu memory when !psi_cgroups_enabled sched/psi: Don't create cgroup PSI files when psi_disabled sched/psi: Fix periodic aggregation shut off
2022-10-13Merge tag 'trace-v6.1-1' of ↵Linus Torvalds6-123/+146
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Found that the synthetic events were using strlen/strscpy() on values that could have come from userspace, and that is bad. Consolidate the string logic of kprobe and eprobe and extend it to the synthetic events to safely process string addresses. - Clean up content of text dump in ftrace_bug() where the output does not make char reads into signed and sign extending the byte output. - Fix some kernel docs in the ring buffer code. * tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix reading strings from synthetic events tracing: Add "(fault)" name injection to kernel probes tracing: Move duplicate code of trace_kprobe/eprobe.c into header ring-buffer: Fix kernel-doc ftrace: Fix char print issue in print_ip_ins()
2022-10-12Merge tag 'mm-nonmm-stable-2022-10-11' of ↵Linus Torvalds14-82/+101
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - hfs and hfsplus kmap API modernization (Fabio Francesco) - make crash-kexec work properly when invoked from an NMI-time panic (Valentin Schneider) - ntfs bugfixes (Hawkins Jiawei) - improve IPC msg scalability by replacing atomic_t's with percpu counters (Jiebin Sun) - nilfs2 cleanups (Minghao Chi) - lots of other single patches all over the tree! * tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits) include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype proc: test how it holds up with mapping'less process mailmap: update Frank Rowand email address ia64: mca: use strscpy() is more robust and safer init/Kconfig: fix unmet direct dependencies ia64: update config files nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure fork: remove duplicate included header files init/main.c: remove unnecessary (void*) conversions proc: mark more files as permanent nilfs2: remove the unneeded result variable nilfs2: delete unnecessary checks before brelse() checkpatch: warn for non-standard fixes tag style usr/gen_init_cpio.c: remove unnecessary -1 values from int file ipc/msg: mitigate the lock contention with percpu counter percpu: add percpu_counter_add_local and percpu_counter_sub_local fs/ocfs2: fix repeated words in comments relay: use kvcalloc to alloc page array in relay_alloc_page_array proc: make config PROC_CHILDREN depend on PROC_FS fs: uninline inode_maybe_inc_iversion() ...
2022-10-12tracing: Fix reading strings from synthetic eventsSteven Rostedt (Google)1-6/+17
The follow commands caused a crash: # cd /sys/kernel/tracing # echo 's:open char file[]' > dynamic_events # echo 'hist:keys=common_pid:file=filename:onchange($file).trace(open,$file)' > events/syscalls/sys_enter_openat/trigger' # echo 1 > events/synthetic/open/enable BOOM! The problem is that the synthetic event field "char file[]" will read the value given to it as a string without any memory checks to make sure the address is valid. The above example will pass in the user space address and the sythetic event code will happily call strlen() on it and then strscpy() where either one will cause an oops when accessing user space addresses. Use the helper functions from trace_kprobe and trace_eprobe that can read strings safely (and actually succeed when the address is from user space and the memory is mapped in). Now the above can show: packagekitd-1721 [000] ...2. 104.597170: open: file=/usr/lib/rpm/fileattrs/cmake.attr in:imjournal-978 [006] ...2. 104.599642: open: file=/var/lib/rsyslog/imjournal.state.tmp packagekitd-1721 [000] ...2. 104.626308: open: file=/usr/lib/rpm/fileattrs/debuginfo.attr Link: https://lkml.kernel.org/r/20221012104534.826549315@goodmis.org Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tom Zanussi <zanussi@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-10-12tracing: Add "(fault)" name injection to kernel probesSteven Rostedt (Google)1-6/+25
Have the specific functions for kernel probes that read strings to inject the "(fault)" name directly. trace_probes.c does this too (for uprobes) but as the code to read strings are going to be used by synthetic events (and perhaps other utilities), it simplifies the code by making sure those other uses do not need to implement the "(fault)" name injection as well. Link: https://lkml.kernel.org/r/20221012104534.644803645@goodmis.org Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tom Zanussi <zanussi@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-10-12tracing: Move duplicate code of trace_kprobe/eprobe.c into headerSteven Rostedt (Google)3-110/+106
The functions: fetch_store_strlen_user() fetch_store_strlen() fetch_store_string_user() fetch_store_string() are identical in both trace_kprobe.c and trace_eprobe.c. Move them into a new header file trace_probe_kernel.h to share it. This code will later be used by the synthetic events as well. Marked for stable as a fix for a crash in synthetic events requires it. Link: https://lkml.kernel.org/r/20221012104534.467668078@goodmis.org Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tom Zanussi <zanussi@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-10-12Merge tag 'irq-core-2022-10-12' of ↵Linus Torvalds1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt updates from Thomas Gleixner: "Core code: - Provide a generic wrapper which can be utilized in drivers to handle the problem of force threaded demultiplex interrupts on RT enabled kernels. This avoids conditionals and horrible quirks in drivers all over the place - Fix up affected pinctrl and GPIO drivers to make them cleanly RT safe Interrupt drivers: - A new driver for the FSL MU platform specific MSI implementation - Make irqchip_init() available for pure ACPI based systems - Provide a functional DT binding for the Realtek RTL interrupt chip - The usual DT updates and small code improvements all over the place" * tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) irqchip: IMX_MU_MSI should depend on ARCH_MXC irqchip/imx-mu-msi: Fix wrong register offset for 8ulp irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap dt-bindings: irqchip: Describe the IMX MU block as a MSI controller irqchip: Add IMX MU MSI controller driver dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support irqchip/gic-v3: Fix typo in comment dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END platform-msi: Export symbol platform_msi_create_irq_domain() irqchip/realtek-rtl: use parent interrupts dt-bindings: interrupt-controller: realtek,rtl-intc: require parents irqchip/realtek-rtl: use irq_domain_add_linear() irqchip: Make irqchip_init() usable on pure ACPI systems bcma: gpio: Use generic_handle_irq_safe() gpio: mlxbf2: Use generic_handle_irq_safe() platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe() ssb: gpio: Use generic_handle_irq_safe() pinctrl: amd: Use generic_handle_irq_safe() ...
2022-10-12ring-buffer: Fix kernel-docJiapeng Chong1-3/+3
kernel/trace/ring_buffer.c:895: warning: expecting prototype for ring_buffer_nr_pages_dirty(). Prototype was for ring_buffer_nr_dirty_pages() instead. kernel/trace/ring_buffer.c:5313: warning: expecting prototype for ring_buffer_reset_cpu(). Prototype was for ring_buffer_reset_online_cpus() instead. kernel/trace/ring_buffer.c:5382: warning: expecting prototype for rind_buffer_empty(). Prototype was for ring_buffer_empty() instead. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2340 Link: https://lkml.kernel.org/r/20221009020642.12506-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-10-12ftrace: Fix char print issue in print_ip_ins()Zheng Yejian1-4/+1
When ftrace bug happened, following log shows every hex data in problematic ip address: actual: ffffffe8:6b:ffffffd9:01:21 But so many 'f's seem a little confusing, and that is because format '%x' being used to print signed chars in array 'ins'. As suggested by Joe, change to use format "%*phC" to print array 'ins'. After this patch, the log is like: actual: e8:6b:d9:01:21 Link: https://lkml.kernel.org/r/20221011120352.1878494-1-zhengyejian1@huawei.com Fixes: 6c14133d2d3f ("ftrace: Do not blindly read the ip address in ftrace_bug()") Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-10-11fork: remove duplicate included header filesXu Panda1-1/+0
linux/sched/mm.h is included more than once. Link: https://lkml.kernel.org/r/20220912071556.16811-1-xu.panda@zte.com.cn Signed-off-by: Xu Panda <xu.panda@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Cc: Andy Lutomirski <luto@kernel.org> Cc: Christian Brauner (Microsoft) <brauner@kernel.org> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11treewide: use get_random_bytes() when possibleJason A. Donenfeld1-1/+1
The prandom_bytes() function has been a deprecated inline wrapper around get_random_bytes() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_u32() when possibleJason A. Donenfeld5-5/+5
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld3-5/+5
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-10Merge tag 'gfs2-nopid-for-v6.1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 debugfs updates from Andreas Gruenbacher: - Improve the way how the state of glocks is reported in debugfs for glocks which are not held by processes, but rather by other resouces like cached inodes or flocks. * tag 'gfs2-nopid-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Mark the remaining process-independent glock holders as GL_NOPID gfs2: Mark flock glock holders as GL_NOPID gfs2: Add GL_NOPID flag for process-independent glock holders gfs2: Add flocks to glockfd debugfs file gfs2: Add glockfd debugfs file
2022-10-10Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds21-88/+318
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-10Merge tag 'acpi-6.1-rc1-2' of ↵Linus Torvalds1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These fix two issues, in APEI and in the int3472 driver, clean up the ACPI thermal driver, add ACPI support for non-GPE system wakeup events and make the system reboot code use the S5 (system off) state by default. Specifics: - Fix ACPI device object reference counting in (recently updated) skl_int3472_fill_clk_pdata() (Andy Shevchenko). - Fix a memory leak in APEI by avoiding to add a task_work to kernel threads running when an asynchronous error is detected (Shuai Xue). - Add ACPI support for handling system wakeups via GPIO wake capable IRQs in addition to GPEs (Raul E Rangel). - Make the system reboot code put ACPI-enabled systems into the S5 (system off) state which is necessary for some platforms to work as expected (Kai-Heng Feng). - Make the white space usage in the ACPI thermal driver more consistent and drop redundant code from it (Rafael Wysocki)" * tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: thermal: Drop some redundant code ACPI: thermal: Drop redundant parens from expressions ACPI: thermal: Use white space more consistently platform/x86: int3472: Don't leak reference on error ACPI: APEI: do not add task_work to kernel thread to avoid memory leak PM: ACPI: reboot: Reinstate S5 for reboot kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle i2c: acpi: Use ACPI wake capability bit to set wake_irq ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
2022-10-10Merge tag 'dma-mapping-6.1-2022-10-10' of ↵Linus Torvalds1-17/+23
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - fix a regression in the ARM dma-direct conversion (Christoph Hellwig) - use memcpy_{from,to}_page (Fabio M. De Francesco) - cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn) - make SG table pool allocation less fragile (Masahiro Yamada) - don't panic on swiotlb initialization failure (Robin Murphy) * tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping: ARM/dma-mapping: remove the dma_coherent member of struct dev_archdata ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifier lib/sg_pool: change module_init(sg_pool_init) to subsys_initcall MAINTAINERS: merge SWIOTLB SUBSYSTEM into DMA MAPPING HELPERS swiotlb: don't panic! swiotlb: replace kmap_atomic() with memcpy_{from,to}_page()
2022-10-10Merge tag 'bitmap-6.1-rc1' of https://github.com/norov/linuxLinus Torvalds2-6/+5
Pull bitmap updates from Yury Norov: - Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld) - cleanup nr_cpu_ids vs nr_cpumask_bits mess (me) This series cleans that mess and adds new config FORCE_NR_CPUS that allows to optimize cpumask subsystem if the number of CPUs is known at compile-time. - optimize find_bit() functions (me) Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT() macros. - add find_nth_bit() (me) Adds find_nth_bit(), which is ~70 times faster than bitcounting with for_each() loop: for_each_set_bit(bit, mask, size) if (n-- == 0) return bit; Also adds bitmap_weight_and() to let people replace this pattern: tmp = bitmap_alloc(nbits); bitmap_and(tmp, map1, map2, nbits); weight = bitmap_weight(tmp, nbits); bitmap_free(tmp); with a single bitmap_weight_and() call. - repair cpumask_check() (me) After switching cpumask to use nr_cpu_ids, cpumask_check() started generating many false-positive warnings. This series fixes it. - Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin Schneider) Extends the API with one more function and applies it in sched/core. * tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits) sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot() lib/test_cpumask: Add for_each_cpu_and(not) tests cpumask: Introduce for_each_cpu_andnot() lib/find_bit: Introduce find_next_andnot_bit() cpumask: fix checking valid cpu range lib/bitmap: add tests for for_each() loops lib/find: optimize for_each() macros lib/bitmap: introduce for_each_set_bit_wrap() macro lib/find_bit: add find_next{,_and}_bit_wrap cpumask: switch for_each_cpu{,_not} to use for_each_bit() net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and} cpumask: add cpumask_nth_{,and,andnot} lib/bitmap: remove bitmap_ord_to_pos lib/bitmap: add tests for find_nth_bit() lib: add find_nth{,_and,_andnot}_bit() lib/bitmap: add bitmap_weight_and() lib/bitmap: don't call __bitmap_weight() in kernel code tools: sync find_bit() implementation lib/find_bit: optimize find_next_bit() functions lib/find_bit: create find_first_zero_bit_le() ...
2022-10-10Merge tag 'trace-v6.1' of ↵Linus Torvalds17-358/+1114
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: "Major changes: - Changed location of tracing repo from personal git repo to: git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git - Added Masami Hiramatsu as co-maintainer - Updated MAINTAINERS file to separate out FTRACE as it is more than just TRACING. Minor changes: - Added Mark Rutland as FTRACE reviewer - Updated user_events to make it on its way to remove the BROKEN tag. The changes should now be acceptable but will run it through a cycle and hopefully we can remove the BROKEN tag next release. - Added filtering to eprobes - Added a delta time to the benchmark trace event - Have the histogram and filter callbacks called via a switch statement instead of indirect functions. This speeds it up to avoid retpolines. - Add a way to wake up ring buffer waiters waiting for the ring buffer to fill up to its watermark. - New ioctl() on the trace_pipe_raw file to wake up ring buffer waiters. - Wake up waiters when the ring buffer is disabled. A reader may block when the ring buffer is disabled, but if it was blocked when the ring buffer is disabled it should then wake up. Fixes: - Allow splice to read partially read ring buffer pages. This fixes splice never moving forward. - Fix inverted compare that made the "shortest" ring buffer wait queue actually the longest. - Fix a race in the ring buffer between resetting a page when a writer goes to another page, and the reader. - Fix ftrace accounting bug when function hooks are added at boot up before the weak functions are set to "disabled". - Fix bug that freed a user allocated snapshot buffer when enabling a tracer. - Fix possible recursive locks in osnoise tracer - Fix recursive locking direct functions - Other minor clean ups and fixes" * tag 'trace-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits) ftrace: Create separate entry in MAINTAINERS for function hooks tracing: Update MAINTAINERS to reflect new tracing git repo tracing: Do not free snapshot if tracer is on cmdline ftrace: Still disable enabled records marked as disabled tracing/user_events: Move pages/locks into groups to prepare for namespaces tracing: Add Masami Hiramatsu as co-maintainer tracing: Remove unused variable 'dups' MAINTAINERS: add myself as a tracing reviewer ring-buffer: Fix race between reset page and reading page tracing/user_events: Update ABI documentation to align to bits vs bytes tracing/user_events: Use bits vs bytes for enabled status page data tracing/user_events: Use refcount instead of atomic for ref tracking tracing/user_events: Ensure user provided strings are safely formatted tracing/user_events: Use WRITE instead of READ for io vector import tracing/user_events: Use NULL for strstr checks tracing: Fix spelling mistake "preapre" -> "prepare" tracing: Wake up waiters when tracing is disabled tracing: Add ioctl() to force ring buffer waiters to wake up tracing: Wake up ring buffer waiters on closing of the file ring-buffer: Add ring_buffer_wake_waiters() ...
2022-10-10Merge tag 'sysctl-6.1-rc1' of ↵Linus Torvalds2-33/+32
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "Just some boring cleanups on the sysctl front for this release" * tag 'sysctl-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: kernel/sysctl-test: use SYSCTL_{ZERO/ONE_HUNDRED} instead of i_{zero/one_hundred} kernel/sysctl.c: move sysctl_vals and sysctl_long_vals to sysctl.c sysctl: remove max_extfrag_threshold kernel/sysctl.c: remove unnecessary (void*) conversions proc: remove initialization assignment
2022-10-10module: tracking: Keep a record of tainted unloaded modules onlyAaron Tomlin1-0/+3
This ensures that no module record/or entry is added to the unloaded_tainted_modules list if it does not carry a taint. Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Fixes: 99bd9956551b ("module: Introduce module unload taint tracking") Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-10-10Merge tag 'modules-6.1-rc1' of ↵Linus Torvalds2-1/+69
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: - minor enhancement for sysfs compression string (David Disseldorp) - debugfs interface to view unloaded tainted modules (Aaron Tomlin) * tag 'modules-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module/decompress: generate sysfs string at compile time module: Add debugfs interface to view unloaded tainted modules
2022-10-10Merge tag 'kbuild-v6.1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove potentially incomplete targets when Kbuid is interrupted by SIGINT etc in case GNU Make may miss to do that when stderr is piped to another program. - Rewrite the single target build so it works more correctly. - Fix rpm-pkg builds with V=1. - List top-level subdirectories in ./Kbuild. - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms. - Avoid two different modules in lib/zstd/ having shared code, which potentially causes building the common code as build-in and modular back-and-forth. - Unify two modpost invocations to optimize the build process. - Remove head-y syntax in favor of linker scripts for placing particular sections in the head of vmlinux. - Bump the minimal GNU Make version to 3.82. - Clean up misc Makefiles and scripts. * tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) docs: bump minimal GNU Make version to 3.82 ia64: simplify esi object addition in Makefile Revert "kbuild: Check if linker supports the -X option" kbuild: rebuild .vmlinux.export.o when its prerequisite is updated kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o zstd: Fixing mixed module-builtin objects kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols kallsyms: take the input file instead of reading stdin kallsyms: drop duplicated ignore patterns from kallsyms.c kbuild: reuse mksysmap output for kallsyms mksysmap: update comment about __crc_* kbuild: remove head-y syntax kbuild: use obj-y instead extra-y for objects placed at the head kbuild: hide error checker logs for V=1 builds kbuild: re-run modpost when it is updated kbuild: unify two modpost invocations kbuild: move vmlinux.o rule to the top Makefile kbuild: move .vmlinux.objs rule to Makefile.modpost kbuild: list sub-directories in ./Kbuild Makefile.compiler: replace cc-ifversion with compiler-specific macros ...
2022-10-10Merge tag 'livepatching-for-6.1' of ↵Linus Torvalds2-3/+35
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: - Fix race between fork and livepatch transition revert - Add sysfs entry that shows "patched" state for each object (module) that can be livepatched by the given livepatch - Some clean up * tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: selftests/livepatch: add sysfs test livepatch: add sysfs entry "patched" for each klp_object selftests/livepatch: normalize sysctl error message livepatch: Add a missing newline character in klp_module_coming() livepatch: fix race between fork and KLP transition
2022-10-10Merge tag 'printk-for-6.1' of ↵Linus Torvalds1-15/+4
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Initialize pointer hashing using the system workqueue. It avoids taking locks in printk()/vsprintf() code path - Misc code clean up * tag 'printk-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Mark __printk percpu data ready __ro_after_init printk: Remove bogus comment vs. boot consoles printk: Remove write only variable nr_ext_console_drivers printk: Declare log_wait properly printk: Make pr_flush() static lib/vsprintf: Initialize vsprintf's pointer hash once the random core is ready. lib/vsprintf: Remove static_branch_likely() from __ptr_to_hashval(). lib/vnsprintf: add const modifier for param 'bitmap'
2022-10-10Merge tag 'cgroup-for-6.1' of ↵Linus Torvalds5-342/+663
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - cpuset now support isolated cpus.partition type, which will enable dynamic CPU isolation - pids.peak added to remember the max number of pids used - holes in cgroup namespace plugged - internal cleanups * tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (25 commits) cgroup: use strscpy() is more robust and safer iocost_monitor: reorder BlkgIterator cgroup: simplify code in cgroup_apply_control cgroup: Make cgroup_get_from_id() prettier cgroup/cpuset: remove unreachable code cgroup: Remove CFTYPE_PRESSURE cgroup: Improve cftype add/rm error handling kselftest/cgroup: Add cpuset v2 partition root state test cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst cgroup/cpuset: Make partition invalid if cpumask change violates exclusivity rule cgroup/cpuset: Relocate a code block in validate_change() cgroup/cpuset: Show invalid partition reason string cgroup/cpuset: Add a new isolated cpus.partition type cgroup/cpuset: Relax constraints to partition & cpus changes cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective cgroup/cpuset: Miscellaneous cleanups & add helper functions cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset cgroup: add pids.peak interface for pids controller cgroup: Remove data-race around cgrp_dfl_visible cgroup: Fix build failure when CONFIG_SHRINKER_DEBUG ...
2022-10-10Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds2-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: - Huawei reported that when they updated their kernel from 4.4 to something much newer, some userspace code they had broke, the culprit being the accidental removal of O_NONBLOCK from /dev/random way back in 5.6. It's been gone for over 2 years now and this is the first we've heard of it, but userspace breakage is userspace breakage, so O_NONBLOCK is now back. - Use randomness from hardware RNGs much more often during early boot, at the same interval that crng reseeds are done, from Dominik. - A semantic change in hardware RNG throttling, so that the hwrng framework can properly feed random.c with randomness from hardware RNGs that aren't specifically marked as creditable. A related patch coming to you via Herbert's hwrng tree depends on this one, not to compile, but just to function properly, so you may want to merge this PULL before that one. - A fix to clamp credited bits from the interrupts pool to the size of the pool sample. This is mainly just a theoretical fix, as it'd be pretty hard to exceed it in practice. - Oracle reported that InfiniBand TCP latency regressed by around 10-15% after a change a few cycles ago made at the request of the RT folks, in which we hoisted a somewhat rare operation (1 in 1024 times) out of the hard IRQ handler and into a workqueue, a pretty common and boring pattern. It turns out, though, that scheduling a worker from there has overhead of its own, whereas scheduling a timer on that same CPU for the next jiffy amortizes better and doesn't incur the same overhead. I also eliminated a cache miss by moving the work_struct (and subsequently, the timer_list) to below a critical cache line, so that the more critical members that are accessed on every hard IRQ aren't split between two cache lines. - The boot-time initialization of the RNG has been split into two approximate phases: what we can accomplish before timekeeping is possible and what we can accomplish after. This winds up being useful so that we can use RDRAND to seed the RNG before CONFIG_SLAB_FREELIST_RANDOM=y systems initialize slabs, in addition to other early uses of randomness. The effect is that systems with RDRAND (or a bootloader seed) will never see any warnings at all when setting CONFIG_WARN_ALL_UNSEEDED_RANDOM=y. And kfence benefits from getting a better seed of its own. - Small systems without much entropy sometimes wind up putting some truncated serial number read from flash into hostname, so contribute utsname changes to the RNG, without crediting. - Add smaller batches to serve requests for smaller integers, and make use of them when people ask for random numbers bounded by a given compile-time constant. This has positive effects all over the tree, most notably in networking and kfence. - The original jitter algorithm intended (I believe) to schedule the timer for the next jiffy, not the next-next jiffy, yet it used mod_timer(jiffies + 1), which will fire on the next-next jiffy, instead of what I believe was intended, mod_timer(jiffies), which will fire on the next jiffy. So fix that. - Fix a comment typo, from William. * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: random: clear new batches when bringing new CPUs online random: fix typos in get_random_bytes() comment random: schedule jitter credit for next jiffy, not in two jiffies prandom: make use of smaller types in prandom_u32_max random: add 8-bit and 16-bit batches utsname: contribute changes to RNG random: use init_utsname() instead of utsname() kfence: use better stack hash seed random: split initialization into early step and later step random: use expired timer rather than wq for mixing fast pool random: avoid reading two cache lines on irq randomness random: clamp credited irq bits to maximum mixed random: throttle hwrng writes if no entropy is credited random: use hwgenerator randomness more frequently at early boot random: restore O_NONBLOCK support
2022-10-10Merge tag 'locking-core-2022-10-07' of ↵Linus Torvalds7-43/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: - Disable preemption in rwsem_write_trylock()'s attempt to take the rwsem, to avoid RT tasks hogging the CPU, which managed to preempt this function after the owner has been cleared but before a new owner is set. Also add debug checks to enforce this. - Add __lockfunc to more slow path functions and add __sched to semaphore functions. - Mark spinlock APIs noinline when the respective CONFIG_INLINE_SPIN_* toggles are disabled, to reduce LTO text size. - Print more debug information when lockdep gets confused in look_up_lock_class(). - Improve header file abuse checks. - Misc cleanups * tag 'locking-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Print more debug information - report name and key when look_up_lock_class() got confused locking: Add __sched to semaphore functions locking/rwsem: Disable preemption while trying for rwsem lock locking: Detect includes rwlock.h outside of spinlock.h locking: Add __lockfunc to slow path functions locking/spinlocks: Mark spinlocks noinline when inline spinlocks are disabled selftests: futex: Fix 'the the' typo in comment
2022-10-10Merge tag 'perf-core-2022-10-07' of ↵Linus Torvalds7-187/+896
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events updates from Ingo Molnar: "PMU driver updates: - Add AMD Last Branch Record Extension Version 2 (LbrExtV2) feature support for Zen 4 processors. - Extend the perf ABI to provide branch speculation information, if available, and use this on CPUs that have it (eg. LbrExtV2). - Improve Intel PEBS TSC timestamp handling & integration. - Add Intel Raptor Lake S CPU support. - Add 'perf mem' and 'perf c2c' memory profiling support on AMD CPUs by utilizing IBS tagged load/store samples. - Clean up & optimize various x86 PMU details. HW breakpoints: - Big rework to optimize the code for systems with hundreds of CPUs and thousands of breakpoints: - Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem per-CPU rwsem that is read-locked during most of the key operations. - Improve the O(#cpus * #tasks) logic in toggle_bp_slot() and fetch_bp_busy_slots(). - Apply micro-optimizations & cleanups. - Misc cleanups & enhancements" * tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex perf: Fix pmu_filter_match() perf: Fix lockdep_assert_event_ctx() perf/x86/amd/lbr: Adjust LBR regardless of filtering perf/x86/utils: Fix uninitialized var in get_branch_type() perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file perf/x86/amd: Support PERF_SAMPLE_PHY_ADDR perf/x86/amd: Support PERF_SAMPLE_ADDR perf/x86/amd: Support PERF_SAMPLE_{WEIGHT|WEIGHT_STRUCT} perf/x86/amd: Support PERF_SAMPLE_DATA_SRC perf/x86/amd: Add IBS OP_DATA2 DataSrc bit definitions perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO} perf/x86/uncore: Add new Raptor Lake S support perf/x86/cstate: Add new Raptor Lake S support perf/x86/msr: Add new Raptor Lake S support perf/x86: Add new Raptor Lake S support bpf: Check flags for branch stack in bpf_read_branch_records helper perf, hw_breakpoint: Fix use-after-free if perf_event_open() fails perf: Use sample_flags for raw_data perf: Use sample_flags for addr ...
2022-10-10Merge branches 'acpi-apei', 'acpi-wakeup', 'acpi-reboot' and 'acpi-thermal'Rafael J. Wysocki1-0/+17
Merge additional APEI changes, ACPI updates related to device wakeup and system restart and ACPI thermal driver cleanups for 6.1-rc1: - Fix a memory leak in APEI by avoiding to add do not add task_work to kernel threads running when an asynchronous error is detected (Shuai Xue). - Add ACPI support for handling system wakeups via GPIO wake capable IRQs in addition to GPEs (Raul E Rangel). - Make the system reboot code put ACPI-enabled systems into the S5 (system off) state which is necessary for some platforms to work as expected (Kai-Heng Feng). - Make the white space usage in the ACPI thermal driver more consistent and drop redundant code from it (Rafael Wysocki). * acpi-apei: ACPI: APEI: do not add task_work to kernel thread to avoid memory leak * acpi-wakeup: ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle i2c: acpi: Use ACPI wake capability bit to set wake_irq ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get * acpi-reboot: PM: ACPI: reboot: Reinstate S5 for reboot kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode * acpi-thermal: ACPI: thermal: Drop some redundant code ACPI: thermal: Drop redundant parens from expressions ACPI: thermal: Use white space more consistently
2022-10-10Merge tag 'sched-core-2022-10-07' of ↵Linus Torvalds26-418/+470
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "Debuggability: - Change most occurances of BUG_ON() to WARN_ON_ONCE() - Reorganize & fix TASK_ state comparisons, turn it into a bitmap - Update/fix misc scheduler debugging facilities Load-balancing & regular scheduling: - Improve the behavior of the scheduler in presence of lot of SCHED_IDLE tasks - in particular they should not impact other scheduling classes. - Optimize task load tracking, cleanups & fixes - Clean up & simplify misc load-balancing code Freezer: - Rewrite the core freezer to behave better wrt thawing and be simpler in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting all the fallout. Deadline scheduler: - Fix the DL capacity-aware code - Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period() - Relax/optimize locking in task_non_contending() Cleanups: - Factor out the update_current_exec_runtime() helper - Various cleanups, simplifications" * tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) sched: Fix more TASK_state comparisons sched: Fix TASK_state comparisons sched/fair: Move call to list_last_entry() in detach_tasks sched/fair: Cleanup loop_max and loop_break sched/fair: Make sure to try to detach at least one movable task sched: Show PF_flag holes freezer,sched: Rewrite core freezer logic sched: Widen TAKS_state literals sched/wait: Add wait_event_state() sched/completion: Add wait_for_completion_state() sched: Add TASK_ANY for wait_task_inactive() sched: Change wait_task_inactive()s match_state freezer,umh: Clean up freezer/initrd interaction freezer: Have {,un}lock_system_sleep() save/restore flags sched: Rename task_running() to task_on_cpu() sched/fair: Cleanup for SIS_PROP sched/fair: Default to false in test_idle_cores() sched/fair: Remove useless check in select_idle_core() sched/fair: Avoid double search on same cpu sched/fair: Remove redundant check in select_idle_smt() ...
2022-10-09Merge tag 'ucount-rlimits-cleanups-for-v5.19' of ↵Linus Torvalds4-31/+27
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ucounts update from Eric Biederman: "Split rlimit and ucount values and max values After the ucount rlimit code was merged a bunch of small but siginificant bugs were found and fixed. At the time it was realized that part of the problem was that while the ucount rlimits were very similar to the oridinary ucounts (in being nested counts with limits) the semantics were slightly different and the code would be less error prone if there was less sharing. This is the long awaited cleanup that should hopefully keep things more comprehensible and less error prone for whoever needs to touch that code next" * tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: Split rlimit and ucount values and max values
2022-10-09Merge tag 'signal-for-v5.20' of ↵Linus Torvalds3-2/+23
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace update from Eric Biederman: "ptrace: Stop supporting SIGKILL for PTRACE_EVENT_EXIT Recently I had a conversation where it was pointed out to me that SIGKILL sent to a tracee stropped in PTRACE_EVENT_EXIT is quite difficult for a tracer to handle. Keeping SIGKILL working after the process has been killed is pain from an implementation point of view. So since the debuggers don't want this behavior let's see if we can remove this wart for the userspace API If a regression is detected it should only need to be the last change that is the reverted. The other two are just general cleanups that make the last patch simpler" * tag 'signal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Drop signals received after a fatal signal has been processed signal: Guarantee that SIGNAL_GROUP_EXIT is set on process exit signal: Ensure SIGNAL_GROUP_EXIT gets set in do_group_exit
2022-10-09Merge tag 'interrupting_kthread_stop-for-v5.20' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull kthread update from Eric Biederman: "Break out of wait loops on kthread_stop() This is a small tweak to kthread_stop so it breaks out of interruptible waits, that don't explicitly test for kthread_stop. These interruptible waits occassionaly occur in kernel threads do to code sharing" * tag 'interrupting_kthread_stop-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: break out of wait loops on kthread_stop()
2022-10-09gfs2: Merge branch 'for-next.nopid' into for-nextAndreas Gruenbacher1-0/+1
Resolves a conflict in gfs2_inode_lookup() between the following commits: gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED inodes gfs2: Mark the remaining process-independent glock holders as GL_NOPID Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-10-07Merge tag 'driver-core-6.1-rc1' of ↵Linus Torvalds3-11/+33
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core and debug printk changes for 6.1-rc1. Included in here is: - dynamic debug updates for the core and the drm subsystem. The drm changes have all been acked by the relevant maintainers - kernfs fixes for syzbot reported problems - kernfs refactors and updates for cgroup requirements - magic number cleanups and removals from the kernel tree (they were not being used and they really did not actually do anything) - other tiny cleanups All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits) docs: filesystems: sysfs: Make text and code for ->show() consistent Documentation: NBD_REQUEST_MAGIC isn't a magic number a.out: restore CMAGIC device property: Add const qualifier to device_get_match_data() parameter drm_print: add _ddebug descriptor to drm_*dbg prototypes drm_print: prefer bare printk KERN_DEBUG on generic fn drm_print: optimize drm_debug_enabled for jump-label drm-print: add drm_dbg_driver to improve namespace symmetry drm-print.h: include dyndbg header drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro drm_print: interpose drm_*dbg with forwarding macros drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers. drm_print: condense enum drm_debug_category debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs() Documentation: ENI155_MAGIC isn't a magic number Documentation: NBD_REPLY_MAGIC isn't a magic number nbd: remove define-only NBD_MAGIC, previously magic number Documentation: FW_HEADER_MAGIC isn't a magic number Documentation: EEPROM_MAGIC_VALUE isn't a magic number ...
2022-10-07Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-07Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linuxLinus Torvalds1-0/+2
Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang) - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi) - MD pull request via Song: - Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan. - Raid10 performance optimization, by Yu Kuai. - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu) - IO scheduler switching quisce fix (Keith) - s390/dasd block driver updates (Stefan) - support for recovery for the ublk driver (ZiyangZhang) - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph) - blk-mq and null_blk map fixes (Bart) - various bcache fixes (Coly, Jilin, Jules) - nbd signal hang fix (Shigeru) - block writeback throttling fix (Yu) - optimize the passthrough mapping handling (me) - prepare block cgroups to being gendisk based (Christoph) - get rid of an old PSI hack in the block layer, moving it to the callers instead where it belongs (Christoph) - blk-throttle fixes and cleanups (Yu) - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj, Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming, Miaohe, Bart, Coly, Gaosheng * tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ...
2022-10-06Merge tag 'pull-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull vfs constification updates from Al Viro: "whack-a-mole: constifying struct path *" * tag 'pull-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ecryptfs: constify path spufs: constify path nd_jump_link(): constify path audit_init_parent(): constify path __io_setxattr(): constify path do_proc_readlink(): constify path overlayfs: constify path fs/notify: constify path may_linkat(): constify path do_sys_name_to_handle(): constify path ->getprocattr(): attribute name is const char *, TYVM...
2022-10-06sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()Valentin Schneider1-4/+1
This removes the second use of the sched_core_mask temporary mask. Suggested-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Valentin Schneider <vschneid@redhat.com>
2022-10-05tracing: Do not free snapshot if tracer is on cmdlineSteven Rostedt (Google)1-4/+6
The ftrace_boot_snapshot and alloc_snapshot cmdline options allocate the snapshot buffer at boot up for use later. The ftrace_boot_snapshot in particular requires the snapshot to be allocated because it will take a snapshot at the end of boot up allowing to see the traces that happened during boot so that it's not lost when user space takes over. When a tracer is registered (started) there's a path that checks if it requires the snapshot buffer or not, and if it does not and it was allocated it will do a synchronization and free the snapshot buffer. This is only required if the previous tracer was using it for "max latency" snapshots, as it needs to make sure all max snapshots are complete before freeing. But this is only needed if the previous tracer was using the snapshot buffer for latency (like irqoff tracer and friends). But it does not make sense to free it, if the previous tracer was not using it, and the snapshot was allocated by the cmdline parameters. This basically takes away the point of allocating it in the first place! Note, the allocated snapshot worked fine for just trace events, but fails when a tracer is enabled on the cmdline. Further investigation, this goes back even further and it does not require a tracer on the cmdline to fail. Simply enable snapshots and then enable a tracer, and it will remove the snapshot. Link: https://lkml.kernel.org/r/20221005113757.041df7fe@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: 45ad21ca5530 ("tracing: Have trace_array keep track if snapshot buffer is allocated") Reported-by: Ross Zwisler <zwisler@kernel.org> Tested-by: Ross Zwisler <zwisler@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-10-05ftrace: Still disable enabled records marked as disabledSteven Rostedt (Google)1-4/+16
Weak functions started causing havoc as they showed up in the "available_filter_functions" and this confused people as to why some functions marked as "notrace" were listed, but when enabled they did nothing. This was because weak functions can still have fentry calls, and these addresses get added to the "available_filter_functions" file. kallsyms is what converts those addresses to names, and since the weak functions are not listed in kallsyms, it would just pick the function before that. To solve this, there was a trick to detect weak functions listed, and these records would be marked as DISABLED so that they do not get enabled and are mostly ignored. As the processing of the list of all functions to figure out what is weak or not can take a long time, this process is put off into a kernel thread and run in parallel with the rest of start up. Now the issue happens whet function tracing is enabled via the kernel command line. As it starts very early in boot up, it can be enabled before the records that are weak are marked to be disabled. This causes an issue in the accounting, as the weak records are enabled by the command line function tracing, but after boot up, they are not disabled. The ftrace records have several accounting flags and a ref count. The DISABLED flag is just one. If the record is enabled before it is marked DISABLED it will get an ENABLED flag and also have its ref counter incremented. After it is marked for DISABLED, neither the ENABLED flag nor the ref counter is cleared. There's sanity checks on the records that are performed after an ftrace function is registered or unregistered, and this detected that there were records marked as ENABLED with ref counter that should not have been. Note, the module loading code uses the DISABLED flag as well to keep its functions from being modified while its being loaded and some of these flags may get set in this process. So changing the verification code to ignore DISABLED records is a no go, as it still needs to verify that the module records are working too. Also, the weak functions still are calling a trampoline. Even though they should never be called, it is dangerous to leave these weak functions calling a trampoline that is freed, so they should still be set back to nops. There's two places that need to not skip records that have the ENABLED and the DISABLED flags set. That is where the ftrace_ops is processed and sets the records ref counts, and then later when the function itself is to be updated, and the ENABLED flag gets removed. Add a helper function "skip_record()" that returns true if the record has the DISABLED flag set but not the ENABLED flag. Link: https://lkml.kernel.org/r/20221005003809.27d2b97b@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: b39181f7c6907 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-10-05Merge tag 'platform-drivers-x86-v6.1-1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - AMD Platform Management Framework (PMF) driver with AMT and QnQF support - AMD PMC: Improved logging for debugging s2idle issues - Big refactor of the ACPI/x86 backlight handling, ensuring that we only register 1 /sys/class/backlight device per LCD panel - Microsoft Surface: - Surface Laptop Go 2 support - Surface Pro 8 HID sensor support - Asus WMI: - Lots of cleanups - Support for TUF RGB keyboard backlight control - Add support for ROG X13 tablet mode - Siemens Simatic: IPC227G and IPC427G support - Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support - tools/power/x86/intel-speed-select: Various improvements - Various cleanups - Various small bugfixes * tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits) platform/x86: use PLATFORM_DEVID_NONE instead of -1 platform/x86/amd: pmc: Dump idle mask during "check" stage instead platform/x86/intel/wmi: thunderbolt: Use dev_groups callback platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks platform/surface: Split memcpy() of struct ssam_event flexible array platform/x86: compal-laptop: Get rid of a few forward declarations platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf() platform/x86: dell-smbios-base: Use sysfs_emit() platform/x86/amd/pmf: Remove unused power_delta instances platform/x86/amd/pmf: install notify handler after acpi init Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF platform/x86/amd/pmf: Add sysfs to toggle CnQF platform/x86/amd/pmf: Add support for CnQF platform/x86/amd: pmc: Fix build without debugfs platform/x86: hp-wmi: Support touchpad on/off platform/x86: int3472/discrete: Drop a forward declaration platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static platform/x86: wmi: Drop forward declaration of static functions platform/x86: toshiba_acpi: Remove duplicate include platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading ...
2022-10-05Merge branch 'for-6.1/sysfs-patched-object' into for-linusPetr Mladek1-0/+18
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds33-686/+2691
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-10-04Merge tag 'audit-pr-20221003' of ↵Linus Torvalds3-13/+9
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Six audit patches for v6.1, most are pretty trivial, but a quick list of the highlights are below: - Only free the audit proctitle information on task exit. This allows us to cache the information and improve performance slightly. - Use the time_after() macro to do time comparisons instead of doing it directly and potentially causing ourselves problems when the timer wraps. - Convert an audit_context state comparison from a relative enum comparison, e.g. (x < y), to a not-equal comparison to ensure that we are not caught out at some unknown point in the future by an enum shuffle. - A handful of small cleanups such as tidying up comments and removing unused declarations" * tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: remove selinux_audit_rule_update() declaration audit: use time_after to compare time audit: free audit_proctitle only on task exit audit: explicitly check audit_context->context enum value audit: audit_context pid unused, context enum comment fix audit: fix repeated words in comments
2022-10-04kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE modeKai-Heng Feng1-0/+17
Add SYS_OFF_MODE_RESTART_PREPARE callbacks to be invoked before a system restart. Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04Merge branch 'rework/kthreads' into for-linusPetr Mladek1-15/+4
2022-10-04perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutexPeter Zijlstra1-1/+11
Perf fuzzer gifted a lockdep splat: perf_event_init_context() mutex_lock(parent_ctx->mutex); (B) inherit_task_group() inherit_group() inherit_event() perf_event_alloc() perf_try_init_event() := hw_breakpoint_event_init() register_perf_hw_breakpoint() mutex_lock(child->perf_event_mutex); (A) Which is against the normal (documented) order. Now, this is a false positive in that child is not published yet, but also inherited events never end up on ->perf_event_list. Annotate this one away. Fixes: 0912037fec11 ("perf/hw_breakpoint: Reduce contention with large number of tasks") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>