summaryrefslogtreecommitdiffstats
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2014-04-14user namespace: fix incorrect memory barriersMikulas Patocka1-6/+5
smp_read_barrier_depends() can be used if there is data dependency between the readers - i.e. if the read operation after the barrier uses address that was obtained from the read operation before the barrier. In this file, there is only control dependency, no data dependecy, so the use of smp_read_barrier_depends() is incorrect. The code could fail in the following way: * the cpu predicts that idx < entries is true and starts executing the body of the for loop * the cpu fetches map->extent[0].first and map->extent[0].count * the cpu fetches map->nr_extents * the cpu verifies that idx < extents is true, so it commits the instructions in the body of the for loop The problem is that in this scenario, the cpu read map->extent[0].first and map->nr_extents in the wrong order. We need a full read memory barrier to prevent it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-12futex: update documentation for ordering guaranteesDavidlohr Bueso1-9/+23
Commits 11d4616bd07f ("futex: revert back to the explicit waiter counting code") and 69cd9eba3886 ("futex: avoid race between requeue and wake") changed some of the finer details of how we think about futexes. One was a late fix and the other a consequence of overlooking the whole requeuing logic. The first change caused our documentation to be incorrect, and the second made us aware that we need to explicitly add more details to it. Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-12Merge branch 'for-linus' of ↵Linus Torvalds2-9/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-12Merge tag 'trace-3.15-v2' of ↵Linus Torvalds8-335/+289
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: "This includes the final patch to clean up and fix the issue with the design of tracepoints and how a user could register a tracepoint and have that tracepoint not be activated but no error was shown. The design was for an out of tree module but broke in tree users. The clean up was to remove the saving of the hash table of tracepoint names such that they can be enabled before they exist (enabling a module tracepoint before that module is loaded). This added more complexity than needed. The clean up was to remove that code and just enable tracepoints that exist or fail if they do not. This removed a lot of code as well as the complexity that it brought. As a side effect, instead of registering a tracepoint by its name, the tracepoint needs to be registered with the tracepoint descriptor. This removes having to duplicate the tracepoint names that are enabled. The second patch was added that simplified the way modules were searched for. This cleanup required changes that were in the 3.15 queue as well as some changes that were added late in the 3.14-rc cycle. This final change waited till the two were merged in upstream and then the change was added and full tests were run. Unfortunately, the test found some errors, but after it was already submitted to the for-next branch and not to be rebased. Sparse errors were detected by Fengguang Wu's bot tests, and my internal tests discovered that the anonymous union initialization triggered a bug in older gcc compilers. Luckily, there was a bugzilla for the gcc bug which gave a work around to the problem. The third and fourth patch handled the sparse error and the gcc bug respectively. A final patch was tagged along to fix a missing documentation for the README file" * tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add missing function triggers dump and cpudump to README tracing: Fix anonymous unions in struct ftrace_event_call tracepoint: Fix sparse warnings in tracepoint.c tracepoint: Simplify tracepoint module search tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
2014-04-12Merge git://git.infradead.org/users/eparis/auditLinus Torvalds5-54/+149
Pull audit updates from Eric Paris. * git://git.infradead.org/users/eparis/audit: (28 commits) AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range audit: do not cast audit_rule_data pointers pointlesly AUDIT: Allow login in non-init namespaces audit: define audit_is_compat in kernel internal header kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c sched: declare pid_alive as inline audit: use uapi/linux/audit.h for AUDIT_ARCH declarations syscall_get_arch: remove useless function arguments audit: remove stray newline from audit_log_execve_info() audit_panic() call audit: remove stray newlines from audit_log_lost messages audit: include subject in login records audit: remove superfluous new- prefix in AUDIT_LOGIN messages audit: allow user processes to log from another PID namespace audit: anchor all pid references in the initial pid namespace audit: convert PPIDs to the inital PID namespace. pid: get pid_t ppid of task in init_pid_ns audit: rename the misleading audit_get_context() to audit_take_context() audit: Add generic compat syscall support audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL ...
2014-04-12missing bits of "splice: fix racy pipe->buffers uses"Al Viro2-3/+3
that commit has fixed only the parts of that mess in fs/splice.c itself; there had been more in several other ->splice_read() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-10tracing: Add missing function triggers dump and cpudump to READMESteven Rostedt (Red Hat)1-0/+2
The debugfs tracing README file lists all the function triggers except for dump and cpudump. These should be added too. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-09tracing: Fix anonymous unions in struct ftrace_event_callMathieu Desnoyers1-2/+4
gcc <= 4.5.x has significant limitations with respect to initialization of anonymous unions within structures. They need to be surrounded by brackets, _and_ they need to be initialized in the same order in which they appear in the structure declaration. Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676 Link: http://lkml.kernel.org/r/1397077568-3156-1-git-send-email-mathieu.desnoyers@efficios.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-09futex: avoid race between requeue and wakeLinus Torvalds1-0/+5
Jan Stancek reported: "pthread_cond_broadcast/4-1.c testcase from openposix testsuite (LTP) occasionally fails, because some threads fail to wake up. Testcase creates 5 threads, which are all waiting on same condition. Main thread then calls pthread_cond_broadcast() without holding mutex, which calls: futex(uaddr1, FUTEX_CMP_REQUEUE_PRIVATE, 1, 2147483647, uaddr2, ..) This immediately wakes up single thread A, which unlocks mutex and tries to wake up another thread: futex(uaddr2, FUTEX_WAKE_PRIVATE, 1) If thread A manages to call futex_wake() before any waiters are requeued for uaddr2, no other thread is woken up" The ordering constraints for the hash bucket waiter counting are that the waiter counts have to be incremented _before_ getting the spinlock (because the spinlock acts as part of the memory barrier), but the "requeue" operation didn't honor those rules, and nobody had even thought about that case. This fairly simple patch just increments the waiter count for the target hash bucket (hb2) when requeing a futex before taking the locks. It then decrements them again after releasing the lock - the code that actually moves the futex(es) between hash buckets will do the additional required waiter count housekeeping. Reported-and-tested-by: Jan Stancek <jstancek@redhat.com> Acked-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # 3.14 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-09tracepoint: Fix sparse warnings in tracepoint.cMathieu Desnoyers1-2/+4
Fix the following sparse warnings: CHECK kernel/tracepoint.c kernel/tracepoint.c:184:18: warning: incorrect type in assignment (different address spaces) kernel/tracepoint.c:184:18: expected struct tracepoint_func *tp_funcs kernel/tracepoint.c:184:18: got struct tracepoint_func [noderef] <asn:4>*funcs kernel/tracepoint.c:216:18: warning: incorrect type in assignment (different address spaces) kernel/tracepoint.c:216:18: expected struct tracepoint_func *tp_funcs kernel/tracepoint.c:216:18: got struct tracepoint_func [noderef] <asn:4>*funcs kernel/tracepoint.c:392:24: error: return expression in void function CC kernel/tracepoint.o kernel/tracepoint.c: In function tracepoint_module_going: kernel/tracepoint.c:491:6: warning: symbol 'syscall_regfunc' was not declared. Should it be static? kernel/tracepoint.c:508:6: warning: symbol 'syscall_unregfunc' was not declared. Should it be static? Link: http://lkml.kernel.org/r/1397049883-28692-1-git-send-email-mathieu.desnoyers@efficios.com Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-08tracepoint: Simplify tracepoint module searchSteven Rostedt (Red Hat)1-5/+4
Instead of copying the num_tracepoints and tracepoints_ptrs from the module structure to the tp_mod structure, which only uses it to find the module associated to tracepoints of modules that are coming and going, simply copy the pointer to the module struct to the tracepoint tp_module structure. Also removed un-needed brackets around an if statement. Link: http://lkml.kernel.org/r/20140408201705.4dad2c4a@gandalf.local.home Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-08tracepoint: Use struct pointer instead of name hash for reg/unreg tracepointsMathieu Desnoyers6-331/+280
Register/unregister tracepoint probes with struct tracepoint pointer rather than tracepoint name. This change, which vastly simplifies tracepoint.c, has been proposed by Steven Rostedt. It also removes 8.8kB (mostly of text) to the vmlinux size. From this point on, the tracers need to pass a struct tracepoint pointer to probe register/unregister. A probe can now only be connected to a tracepoint that exists. Moreover, tracers are responsible for unregistering the probe before the module containing its associated tracepoint is unloaded. text data bss dec hex filename 10443444 4282528 10391552 25117524 17f4354 vmlinux.orig 10434930 4282848 10391552 25109330 17f2352 vmlinux Link: http://lkml.kernel.org/r/1396992381-23785-2-git-send-email-mathieu.desnoyers@efficios.com CC: Ingo Molnar <mingo@kernel.org> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Frank Ch. Eigler <fche@redhat.com> CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> [ SDR - fixed return val in void func in tracepoint_module_going() ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-07Merge branch 'akpm' (incoming from Andrew)Linus Torvalds21-117/+155
Merge second patch-bomb from Andrew Morton: - the rest of MM - zram updates - zswap updates - exit - procfs - exec - wait - crash dump - lib/idr - rapidio - adfs, affs, bfs, ufs - cris - Kconfig things - initramfs - small amount of IPC material - percpu enhancements - early ioremap support - various other misc things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (156 commits) MAINTAINERS: update Intel C600 SAS driver maintainers fs/ufs: remove unused ufs_super_block_third pointer fs/ufs: remove unused ufs_super_block_second pointer fs/ufs: remove unused ufs_super_block_first pointer fs/ufs/super.c: add __init to init_inodecache() doc/kernel-parameters.txt: add early_ioremap_debug arm64: add early_ioremap support arm64: initialize pgprot info earlier in boot x86: use generic early_ioremap mm: create generic early_ioremap() support x86/mm: sparse warning fix for early_memremap lglock: map to spinlock when !CONFIG_SMP percpu: add preemption checks to __this_cpu ops vmstat: use raw_cpu_ops to avoid false positives on preemption checks slub: use raw_cpu_inc for incrementing statistics net: replace __this_cpu_inc in route.c with raw_cpu_inc modules: use raw_cpu_write for initialization of per cpu refcount. mm: use raw_cpu ops for determining current NUMA node percpu: add raw_cpu_ops slub: fix leak of 'name' in sysfs_slab_add ...
2014-04-07lglock: map to spinlock when !CONFIG_SMPJosh Triplett1-1/+2
When the system has only one CPU, lglock is effectively a spinlock; map it directly to spinlock to eliminate the indirection and duplicate code. In addition to removing overhead, this drops 1.6k of code with a defconfig modified to have !CONFIG_SMP, and 1.1k with a minimal config. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07modules: use raw_cpu_write for initialization of per cpu refcount.Christoph Lameter1-1/+1
The initialization of a structure is not subject to synchronization. The use of __this_cpu would trigger a false positive with the additional preemption checks for __this_cpu ops. So simply disable the check through the use of raw_cpu ops. Trace: __this_cpu_write operation in preemptible [00000000] code: modprobe/286 caller is __this_cpu_preempt_check+0x38/0x60 CPU: 3 PID: 286 Comm: modprobe Tainted: GF 3.12.0-rc4+ #187 Call Trace: dump_stack+0x4e/0x82 check_preemption_disabled+0xec/0x110 __this_cpu_preempt_check+0x38/0x60 load_module+0xcfd/0x2650 SyS_init_module+0xa6/0xd0 tracesys+0xe1/0xe6 Signed-off-by: Christoph Lameter <cl@linux.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07kernel: use macros from compiler.h instead of __attribute__((...))Gideon Israel Dsouza13-21/+34
To increase compiler portability there is <linux/compiler.h> which provides convenience macros for various gcc constructs. Eg: __weak for __attribute__((weak)). I've replaced all instances of gcc attributes with the right macro in the kernel subsystem. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07kernel/panic.c: display reason at end + pr_emergFabian Frederick1-7/+6
Currently, booting without initrd specified on 80x25 screen gives a call trace followed by atkbd : Spurious ACK. Original message ("VFS: Unable to mount root fs") is not available. Of course this could happen in other situations... This patch displays panic reason after call trace which could help lot of people even if it's not the very last line on screen. Also, convert all panic.c printk(KERN_EMERG to pr_emerg( [akpm@linux-foundation.org: missed a couple of pr_ conversions] Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07hung_task: check the value of "sysctl_hung_task_timeout_sec"Liu Hua1-0/+6
As sysctl_hung_task_timeout_sec is unsigned long, when this value is larger then LONG_MAX/HZ, the function schedule_timeout_interruptible in watchdog will return immediately without sleep and with print : schedule_timeout: wrong timeout value ffffffffffffff83 and then the funtion watchdog will call schedule_timeout_interruptible again and again. The screen will be filled with "schedule_timeout: wrong timeout value ffffffffffffff83" This patch does some check and correction in sysctl, to let the function schedule_timeout_interruptible allways get the valid parameter. Signed-off-by: Liu Hua <sdu.liu@huawei.com> Tested-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Cc: <stable@vger.kernel.org> [3.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07wait: WSTOPPED|WCONTINUED doesn't work if a zombie leader is traced by ↵Oleg Nesterov1-13/+9
another process Even if the main thread is dead the process still can stop/continue. However, if the leader is ptraced wait_consider_task(ptrace => false) always skips wait_task_stopped/wait_task_continued, so WSTOPPED or WCONTINUED can never work for the natural parent in this case. Move the "A zombie ptracee is only visible to its ptracer" check into the "if (!delay_group_leader(p))" block. ->notask_error is cleared by the "fall through" code below. This depends on the previous change, wait_task_stopped/continued must be avoided if !delay_group_leader() and the tracer is ->real_parent. Otherwise WSTOPPED|WEXITED could wrongly report "stopped" when the child is already dead (single-threaded or not). If it is traced by another task then the "stopped" state is fine until the debugger detaches and reveals a zombie state. Stupid test-case: void *tfunc(void *arg) { sleep(1); // wait for zombie leader raise(SIGSTOP); exit(0x13); return NULL; } int run_child(void) { pthread_t thread; if (!fork()) { int tracee = getppid(); assert(ptrace(PTRACE_ATTACH, tracee, 0,0) == 0); do ptrace(PTRACE_CONT, tracee, 0,0); while (wait(NULL) > 0); return 0; } sleep(1); // wait for PTRACE_ATTACH assert(pthread_create(&thread, NULL, tfunc, NULL) == 0); pthread_exit(NULL); } int main(void) { int child, stat; child = fork(); if (!child) return run_child(); assert(child == waitpid(-1, &stat, WSTOPPED)); assert(stat == 0x137f); kill(child, SIGCONT); assert(child == waitpid(-1, &stat, WCONTINUED)); assert(stat == 0xffff); assert(child == waitpid(-1, &stat, 0)); assert(stat == 0x1300); return 0; } Without this patch it hangs in waitpid(WSTOPPED), wait_task_stopped() is never called. Note: this doesn't fix all problems with a zombie delay_group_leader(), WCONTINUED | WEXITED check is not exactly right. debugger can't assume it will be notified if another thread reaps the whole thread group. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Lennart Poettering <lpoetter@redhat.com> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07wait: WSTOPPED|WCONTINUED hangs if a zombie child is traced by real_parentOleg Nesterov1-13/+16
"A zombie is only visible to its ptracer" logic in wait_consider_task() is very wrong. Trivial test-case: #include <unistd.h> #include <sys/ptrace.h> #include <sys/wait.h> #include <assert.h> int main(void) { int child = fork(); if (!child) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); return 0x23; } assert(waitid(P_ALL, child, NULL, WEXITED | WNOWAIT) == 0); assert(waitid(P_ALL, 0, NULL, WSTOPPED) == -1); return 0; } it hangs in waitpid(WSTOPPED) despite the fact it has a single zombie child. This is because wait_consider_task(ptrace => 0) sees p->ptrace and cleares ->notask_error assuming that the debugger should detach and notify us. Change wait_consider_task(ptrace => 0) to pretend that ptrace == T if the child is traced by us. This really simplifies the logic and allows us to do more fixes, see the next changes. This also hides the unwanted group stop state automatically, we can remove another ptrace_reparented() check. Unfortunately, this adds the following behavioural changes: 1. Before this patch wait(WEXITED | __WNOTHREAD) does not reap a natural child if it is traced by the caller's sub-thread. Hopefully nobody will ever notice this change, and I think that nobody should rely on this behaviour anyway. 2. SIGNAL_STOP_CONTINUED is no longer hidden from debugger if it is real parent. While this change comes as a side effect, I think it is good by itself. The group continued state can not be consumed by another process in this case, it doesn't depend on ptrace, it doesn't make sense to hide it from real parent. Perhaps we should add the thread_group_leader() check before wait_task_continued()? May be, but this shouldn't depend on ptrace_reparented(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Lennart Poettering <lpoetter@redhat.com> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07wait: completely ignore the EXIT_DEAD tasksOleg Nesterov1-5/+6
Now that EXIT_DEAD is the terminal state it doesn't make sense to call eligible_child() or security_task_wait() if the task is really dead. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Lennart Poettering <lpoetter@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07wait: use EXIT_TRACE only if thread_group_leader(zombie)Oleg Nesterov1-10/+7
wait_task_zombie() always uses EXIT_TRACE/ptrace_unlink() if ptrace_reparented(). This is suboptimal and a bit confusing: we do not need do_notify_parent(p) if !thread_group_leader(p) and in this case we also do not need ptrace_unlink(), we can rely on ptrace_release_task(). Change wait_task_zombie() to check thread_group_leader() along with ptrace_reparented() and simplify the final p->exit_state transition. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Lennart Poettering <lpoetter@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07wait: introduce EXIT_TRACE to avoid the racy EXIT_DEAD->EXIT_ZOMBIE transitionOleg Nesterov1-29/+21
wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and drops tasklist_lock. If this task is not the natural child and it is traced, we change its state back to EXIT_ZOMBIE for ->real_parent. The last transition is racy, this is even documented in 50b8d257486a "ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race". wait_consider_task() tries to detect this transition and clear ->notask_error but we can't rely on ptrace_reparented(), debugger can exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE. And there is another problem which were missed before: this transition can also race with reparent_leader() which doesn't reset >exit_signal if EXIT_DEAD, assuming that this task must be reaped by someone else. So the tracee can be re-parented with ->exit_signal != SIGCHLD, and if /sbin/init doesn't use __WALL it becomes unreapable. This was fixed by the previous commit, but it was the temporary hack. 1. Add the new exit_state, EXIT_TRACE. It means that the task is the traced zombie, debugger is going to detach and notify its natural parent. This new state is actually EXIT_ZOMBIE | EXIT_DEAD. This way we can avoid the changes in proc/kgdb code, get_task_state() still reports "X (dead)" in this case. Note: with or without this change userspace can see Z -> X -> Z transition. Not really bad, but probably makes sense to fix. 2. Change wait_task_zombie() to use EXIT_TRACE instead of EXIT_DEAD if we need to notify the ->real_parent. 3. Revert the previous hack in reparent_leader(), now that EXIT_DEAD is always the final state we can safely ignore such a task. 4. Change wait_consider_task() to check EXIT_TRACE separately and kill the racy and no longer needed ptrace_reparented() case. If ptrace == T an EXIT_TRACE thread should be simply ignored, the owner of this state is going to ptrace_unlink() this task. We can pretend that it was already removed from ->ptraced list. Otherwise we should skip this thread too but clear ->notask_error, we must be the natural parent and debugger is going to untrace and notify us. IOW, this doesn't differ from "EXIT_ZOMBIE && p->ptrace" even if the task was already untraced. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com> Reported-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Lennart Poettering <lpoetter@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07wait: fix reparent_leader() vs EXIT_DEAD->EXIT_ZOMBIE raceOleg Nesterov1-4/+11
wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and drops tasklist_lock. If this task is not the natural child and it is traced, we change its state back to EXIT_ZOMBIE for ->real_parent. The last transition is racy, this is even documented in 50b8d257486a "ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race". wait_consider_task() tries to detect this transition and clear ->notask_error but we can't rely on ptrace_reparented(), debugger can exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE. And there is another problem which were missed before: this transition can also race with reparent_leader() which doesn't reset >exit_signal if EXIT_DEAD, assuming that this task must be reaped by someone else. So the tracee can be re-parented with ->exit_signal != SIGCHLD, and if /sbin/init doesn't use __WALL it becomes unreapable. Change reparent_leader() to update ->exit_signal even if EXIT_DEAD. Note: this is the simple temporary hack for -stable, it doesn't try to solve all problems, it will be reverted by the next changes. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com> Reported-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Lennart Poettering <lpoetter@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07kernel/exit.c: call proc_exit_connector() after exit_state is setGuillaume Morin1-1/+1
The process events connector delivers a notification when a process exits. This is really convenient for a process that spawns and wants to monitor its children through an epoll-able() interface. Unfortunately, there is a small window between when the event is delivered and the child become wait()-able. This is creates a race if the parent wants to make sure that it knows about the exit, e.g pid_t pid = fork(); if (pid > 0) { register_interest_for_pid(pid); if (waitpid(pid, NULL, WNOHANG) > 0) { /* We might have raced with exit() */ } return; } /* Child */ execve(...) register_interest_for_pid() would be telling the the connector socket reader to pay attention to events related to pid. Though this is not a bug, I think it would make the connector a bit more usable if this race was closed by simply moving the call to proc_exit_connector() from just before exit_notify() to right after. Oleg said: : Even with this patch the code above is still "racy" if the child is : multi-threaded. Plus it should obviously filter-out subthreads. And : afaics there is no way to make it reliable, even if you change the code : above so that waitpid() is called only after the last thread exits WNOHANG : still can fail. Signed-off-by: Guillaume Morin <guillaume@morinfr.org> Cc: Matt Helsley <matt.helsley@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07exit: move check_stack_usage() to the end of do_exit()Oleg Nesterov1-1/+1
It is not clear why check_stack_usage() is called so early and thus it never checks the stack usage in, say, exit_notify() or flush_ptrace_hw_breakpoint() or other functions which are only called by do_exit(). Move the callsite down to the last preempt_disable/schedule. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07exit: call disassociate_ctty() before exit_task_namespaces()Oleg Nesterov1-4/+2
Commit 8aac62706ada ("move exit_task_namespaces() outside of exit_notify()") breaks pppd and the exiting service crashes the kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: ppp_register_channel+0x13/0x20 [ppp_generic] Call Trace: ppp_asynctty_open+0x12b/0x170 [ppp_async] tty_ldisc_open.isra.2+0x27/0x60 tty_ldisc_hangup+0x1e3/0x220 __tty_hangup+0x2c4/0x440 disassociate_ctty+0x61/0x270 do_exit+0x7f2/0xa50 ppp_register_channel() needs ->net_ns and current->nsproxy == NULL. Move disassociate_ctty() before exit_task_namespaces(), it doesn't make sense to delay it after perf_event_exit_task() or cgroup_exit(). This also allows to use task_work_add() inside the (nontrivial) code paths in disassociate_ctty(). Investigated by Peter Hurley. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Sree Harsha Totakura <sreeharsha@totakura.in> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Sree Harsha Totakura <sreeharsha@totakura.in> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrey Vagin <avagin@openvz.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [v3.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07res_counter: remove interface for locked charging and unchargingDavid Rientjes1-11/+12
The res_counter_{charge,uncharge}_locked() variants are not used in the kernel outside of the resource counter code itself, so remove the interface. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Tim Hockin <thockin@google.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm, mempolicy: remove per-process flagDavid Rientjes1-1/+0
PF_MEMPOLICY is an unnecessary optimization for CONFIG_SLAB users. There's no significant performance degradation to checking current->mempolicy rather than current->flags & PF_MEMPOLICY in the allocation path, especially since this is considered unlikely(). Running TCP_RR with netperf-2.4.5 through localhost on 16 cpu machine with 64GB of memory and without a mempolicy: threads before after 16 1249409 1244487 32 1281786 1246783 48 1239175 1239138 64 1244642 1241841 80 1244346 1248918 96 1266436 1254316 112 1307398 1312135 128 1327607 1326502 Per-process flags are a scarce resource so we should free them up whenever possible and make them available. We'll be using it shortly for memcg oom reserves. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Tim Hockin <thockin@google.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07fork: collapse copy_flags into copy_processDavid Rientjes1-10/+2
copy_flags() does not use the clone_flags formal and can be collapsed into copy_process() for cleaner code. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Tim Hockin <thockin@google.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm: per-thread vma cachingDavidlohr Bueso2-4/+17
This patch is a continuation of efforts trying to optimize find_vma(), avoiding potentially expensive rbtree walks to locate a vma upon faults. The original approach (https://lkml.org/lkml/2013/11/1/410), where the largest vma was also cached, ended up being too specific and random, thus further comparison with other approaches were needed. There are two things to consider when dealing with this, the cache hit rate and the latency of find_vma(). Improving the hit-rate does not necessarily translate in finding the vma any faster, as the overhead of any fancy caching schemes can be too high to consider. We currently cache the last used vma for the whole address space, which provides a nice optimization, reducing the total cycles in find_vma() by up to 250%, for workloads with good locality. On the other hand, this simple scheme is pretty much useless for workloads with poor locality. Analyzing ebizzy runs shows that, no matter how many threads are running, the mmap_cache hit rate is less than 2%, and in many situations below 1%. The proposed approach is to replace this scheme with a small per-thread cache, maximizing hit rates at a very low maintenance cost. Invalidations are performed by simply bumping up a 32-bit sequence number. The only expensive operation is in the rare case of a seq number overflow, where all caches that share the same address space are flushed. Upon a miss, the proposed replacement policy is based on the page number that contains the virtual address in question. Concretely, the following results are seen on an 80 core, 8 socket x86-64 box: 1) System bootup: Most programs are single threaded, so the per-thread scheme does improve ~50% hit rate by just adding a few more slots to the cache. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 50.61% | 19.90 | | patched | 73.45% | 13.58 | +----------------+----------+------------------+ 2) Kernel build: This one is already pretty good with the current approach as we're dealing with good locality. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 75.28% | 11.03 | | patched | 88.09% | 9.31 | +----------------+----------+------------------+ 3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 70.66% | 17.14 | | patched | 91.15% | 12.57 | +----------------+----------+------------------+ 4) Ebizzy: There's a fair amount of variation from run to run, but this approach always shows nearly perfect hit rates, while baseline is just about non-existent. The amounts of cycles can fluctuate between anywhere from ~60 to ~116 for the baseline scheme, but this approach reduces it considerably. For instance, with 80 threads: +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 1.06% | 91.54 | | patched | 99.97% | 14.18 | +----------------+----------+------------------+ [akpm@linux-foundation.org: fix nommu build, per Davidlohr] [akpm@linux-foundation.org: document vmacache_valid() logic] [akpm@linux-foundation.org: attempt to untangle header files] [akpm@linux-foundation.org: add vmacache_find() BUG_ON] [hughd@google.com: add vmacache_valid_mm() (from Oleg)] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: adjust and enhance comments] Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm, thp: add VM_INIT_DEF_MASK and PRCTL_THP_DISABLEAlex Thorlton2-3/+23
Add VM_INIT_DEF_MASK, to allow us to set the default flags for VMs. It also adds a prctl control which allows us to set the THP disable bit in mm->def_flags so that VMs will pick up the setting as they are created. Signed-off-by: Alex Thorlton <athorlton@sgi.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07Merge branch 'for-3.15-fixes' of ↵Linus Torvalds1-3/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Two patches to fix fallouts from the kernfs conversion: Li's patch to stop leaking cgroup_root refs across multiple mounts and the other fixes the 90s hang during shutdown caused by always using root's uid/gid for new cgroup dirs and files." * 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: newly created dirs and files should be owned by the creator cgroup: fix top cgroup refcnt leak
2014-04-07Merge tag 'cpu-hotplug-3.15-rc1' of ↵Linus Torvalds3-15/+62
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CPU hotplug notifiers registration fixes from Rafael Wysocki: "The purpose of this single series of commits from Srivatsa S Bhat (with a small piece from Gautham R Shenoy) touching multiple subsystems that use CPU hotplug notifiers is to provide a way to register them that will not lead to deadlocks with CPU online/offline operations as described in the changelog of commit 93ae4f978ca7f ("CPU hotplug: Provide lockless versions of callback registration functions"). The first three commits in the series introduce the API and document it and the rest simply goes through the users of CPU hotplug notifiers and converts them to using the new method" * tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) net/iucv/iucv.c: Fix CPU hotplug callback registration net/core/flow.c: Fix CPU hotplug callback registration mm, zswap: Fix CPU hotplug callback registration mm, vmstat: Fix CPU hotplug callback registration profile: Fix CPU hotplug callback registration trace, ring-buffer: Fix CPU hotplug callback registration xen, balloon: Fix CPU hotplug callback registration hwmon, via-cputemp: Fix CPU hotplug callback registration hwmon, coretemp: Fix CPU hotplug callback registration thermal, x86-pkg-temp: Fix CPU hotplug callback registration octeon, watchdog: Fix CPU hotplug callback registration oprofile, nmi-timer: Fix CPU hotplug callback registration intel-idle: Fix CPU hotplug callback registration clocksource, dummy-timer: Fix CPU hotplug callback registration drivers/base/topology.c: Fix CPU hotplug callback registration acpi-cpufreq: Fix CPU hotplug callback registration zsmalloc: Fix CPU hotplug callback registration scsi, fcoe: Fix CPU hotplug callback registration scsi, bnx2fc: Fix CPU hotplug callback registration scsi, bnx2i: Fix CPU hotplug callback registration ...
2014-04-07cgroup: newly created dirs and files should be owned by the creatorTejun Heo1-1/+26
While converting cgroup to kernfs, 2bd59d48ebfb ("cgroup: convert to kernfs") accidentally dropped the logic which makes newly created cgroup dirs and files owned by the current uid / gid. This broke cases where cgroup subtree management is delegated to !root as the sub manager wouldn't be able to create more than single level of hierarchy or put tasks into child cgroups it created. Among other things, this breaks user session management in systemd and one of the symptoms was 90s hang during shutdown. User session systemd running as the user creates a sub-service to initiate shutdown and tries to put kill(1) into it but fails because cgroup.procs is owned by root. This leads to 90s hang during shutdown. Implement cgroup_kn_set_ugid() which sets a kn's uid and gid to those of the caller and use it from file and dir creation paths. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07sched: remove sleep_on() and friendsArnd Bergmann1-46/+0
This is the final piece in the puzzle, as all patches to remove the last users of \(interruptible_\|\)sleep_on\(_timeout\|\) have made it into the 3.15 merge window. The work was long overdue, and this interface in particular should not have survived the BKL removal that was done a couple of years ago. Citing Jon Corbet from http://lwn.net/2001/0201/kernel.php3": "[...] it was suggested that the janitors look for and fix all code that calls sleep_on() [...] since (1) almost all such code is incorrect, and (2) Linus has agreed that those functions should be removed in the 2.5 development series". We haven't quite made it for 2.5, but maybe we can merge this for 3.15. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-06Merge tag 'modules-next-for-linus' of ↵Linus Torvalds3-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Nothing major: the stricter permissions checking for sysfs broke a staging driver; fix included. Greg KH said he'd take the patch but hadn't as the merge window opened, so it's included here to avoid breaking build" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: staging: fix up speakup kobject mode Use 'E' instead of 'X' for unsigned module taint flag. VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms. kallsyms: fix percpu vars on x86-64 with relocation. kallsyms: generalize address range checking module: LLVMLinux: Remove unused function warning from __param_check macro Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE module: remove MODULE_GENERIC_TABLE module: allow multiple calls to MODULE_DEVICE_TABLE() per module module: use pr_cont
2014-04-05Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2-0/+10
Pull ARM changes from Russell King: - Perf updates from Will Deacon: - Support for Qualcomm Krait processors (run perf on your phone!) - Support for Cortex-A12 (run perf stat on your FPGA!) - Support for perf_sample_event_took, allowing us to automatically decrease the sample rate if we can't handle the PMU interrupts quickly enough (run perf record on your FPGA!). - Basic uprobes support from David Long: This patch series adds basic uprobes support to ARM. It is based on patches developed earlier by Rabin Vincent. That approach of adding hooks into the kprobes instruction parsing code was not well received. This approach separates the ARM instruction parsing code in kprobes out into a separate set of functions which can be used by both kprobes and uprobes. Both kprobes and uprobes then provide their own semantic action tables to process the results of the parsing. - ARMv7M (microcontroller) updates from Uwe Kleine-König - OMAP DMA updates (recently added Vinod's Ack even though they've been sitting in linux-next for a few months) to reduce the reliance of omap-dma on the code in arch/arm. - SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan - Support for Cortex-A12 CPU - Align support for ARMv6 with ARMv7 so they can cooperate better in a single zImage. - Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support. - Removal of IRQ_DISABLED from various ARM files - Improved efficiency of virt_to_page() for single zImage - Patch from Ulf Hansson to permit runtime PM callbacks to be available for AMBA devices for suspend/resume as well. - Finally kill asm/system.h on ARM. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits) dmaengine: omap-dma: more consolidation of CCR register setup dmaengine: omap-dma: move IRQ handling to omap-dma dmaengine: omap-dma: move register read/writes into omap-dma.c ARM: omap: dma: get rid of 'p' allocation and clean up ARM: omap: move dma channel allocation into plat-omap code ARM: omap: dma: get rid of errata global ARM: omap: clean up DMA register accesses ARM: omap: remove almost-const variables ARM: omap: remove references to disable_irq_lch dmaengine: omap-dma: cleanup errata 3.3 handling dmaengine: omap-dma: provide register read/write functions dmaengine: omap-dma: use cached CCR value when enabling DMA dmaengine: omap-dma: move barrier to omap_dma_start_desc() dmaengine: omap-dma: move clnk_ctrl setting to preparation functions dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers dmaengine: omap-dma: consolidate clearing channel status register dmaengine: omap-dma: move CCR buffering disable errata out of the fast path dmaengine: omap-dma: provide register definitions dmaengine: omap-dma: consolidate setup of CCR dmaengine: omap-dma: consolidate setup of CSDP ...
2014-04-04cgroup: fix top cgroup refcnt leakLi Zefan1-2/+3
As mount() and kill_sb() is not a one-to-one match, If we mount the same cgroupfs in serveral mount points, and then umount all of them, kill_sb() will be called only once. Try: # mount -t cgroup -o cpuacct xxx /cgroup # mount -t cgroup -o cpuacct xxx /cgroup2 # cat /proc/cgroups | grep cpuacct cpuacct 2 1 1 # umount /cgroup # umount /cgroup2 # cat /proc/cgroups | grep cpuacct cpuacct 2 1 1 You'll see cgroupfs will never be freed. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-03Merge branch 'akpm' (incoming from Andrew)Linus Torvalds14-40/+35
Merge first patch-bomb from Andrew Morton: - Various misc bits - kmemleak fixes - small befs, codafs, cifs, efs, freexxfs, hfsplus, minixfs, reiserfs things - fanotify - I appear to have become SuperH maintainer - ocfs2 updates - direct-io tweaks - a bit of the MM queue - printk updates - MAINTAINERS maintenance - some backlight things - lib/ updates - checkpatch updates - the rtc queue - nilfs2 updates - Small Documentation/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (237 commits) Documentation/SubmittingPatches: remove references to patch-scripts Documentation/SubmittingPatches: update some dead URLs Documentation/filesystems/ntfs.txt: remove changelog reference Documentation/kmemleak.txt: updates fs/reiserfs/super.c: add __init to init_inodecache fs/reiserfs: move prototype declaration to header file fs/hfsplus/attributes.c: add __init to hfsplus_create_attr_tree_cache() fs/hfsplus/extents.c: fix concurrent acess of alloc_blocks fs/hfsplus/extents.c: remove unused variable in hfsplus_get_block nilfs2: update project's web site in nilfs2.txt nilfs2: update MAINTAINERS file entries fix nilfs2: verify metadata sizes read from disk nilfs2: add FITRIM ioctl support for nilfs2 nilfs2: add nilfs_sufile_trim_fs to trim clean segs nilfs2: implementation of NILFS_IOCTL_SET_SUINFO ioctl nilfs2: add nilfs_sufile_set_suinfo to update segment usage nilfs2: add struct nilfs_suinfo_update and flags nilfs2: update MAINTAINERS file entries fs/coda/inode.c: add __init to init_inodecache() BEFS: logging cleanup ...
2014-04-03printk: fix one circular lockdep warning about console_lockJane Li1-0/+2
Fix a warning about possible circular locking dependency. If do in following sequence: enter suspend -> resume -> plug-out CPUx (echo 0 > cpux/online) lockdep will show warning as following: ====================================================== [ INFO: possible circular locking dependency detected ] 3.10.0 #2 Tainted: G O ------------------------------------------------------- sh/1271 is trying to acquire lock: (console_lock){+.+.+.}, at: console_cpu_notify+0x20/0x2c but task is already holding lock: (cpu_hotplug.lock){+.+.+.}, at: cpu_hotplug_begin+0x2c/0x58 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (cpu_hotplug.lock){+.+.+.}: lock_acquire+0x98/0x12c mutex_lock_nested+0x50/0x3d8 cpu_hotplug_begin+0x2c/0x58 _cpu_up+0x24/0x154 cpu_up+0x64/0x84 smp_init+0x9c/0xd4 kernel_init_freeable+0x78/0x1c8 kernel_init+0x8/0xe4 ret_from_fork+0x14/0x2c -> #1 (cpu_add_remove_lock){+.+.+.}: lock_acquire+0x98/0x12c mutex_lock_nested+0x50/0x3d8 disable_nonboot_cpus+0x8/0xe8 suspend_devices_and_enter+0x214/0x448 pm_suspend+0x1e4/0x284 try_to_suspend+0xa4/0xbc process_one_work+0x1c4/0x4fc worker_thread+0x138/0x37c kthread+0xa4/0xb0 ret_from_fork+0x14/0x2c -> #0 (console_lock){+.+.+.}: __lock_acquire+0x1b38/0x1b80 lock_acquire+0x98/0x12c console_lock+0x54/0x68 console_cpu_notify+0x20/0x2c notifier_call_chain+0x44/0x84 __cpu_notify+0x2c/0x48 cpu_notify_nofail+0x8/0x14 _cpu_down+0xf4/0x258 cpu_down+0x24/0x40 store_online+0x30/0x74 dev_attr_store+0x18/0x24 sysfs_write_file+0x16c/0x19c vfs_write+0xb4/0x190 SyS_write+0x3c/0x70 ret_fast_syscall+0x0/0x48 Chain exists of: console_lock --> cpu_add_remove_lock --> cpu_hotplug.lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug.lock); lock(cpu_add_remove_lock); lock(cpu_hotplug.lock); lock(console_lock); *** DEADLOCK *** There are three locks involved in two sequence: a) pm suspend: console_lock (@suspend_console()) cpu_add_remove_lock (@disable_nonboot_cpus()) cpu_hotplug.lock (@_cpu_down()) b) Plug-out CPUx: cpu_add_remove_lock (@(cpu_down()) cpu_hotplug.lock (@_cpu_down()) console_lock (@console_cpu_notify()) => Lockdeps prints warning log. There should be not real deadlock, as flag of console_suspended can protect this. Although console_suspend() releases console_sem, it doesn't tell lockdep about it. That results in the lockdep warning about circular locking when doing the following: enter suspend -> resume -> plug-out CPUx (echo 0 > cpux/online) Fix the problem by telling lockdep we actually released the semaphore in console_suspend() and acquired it again in console_resume(). Signed-off-by: Jane Li <jiel@marvell.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03printk: do not compute the size of the message twicePetr Mladek1-1/+1
This is just a tiny optimization. It removes duplicate computation of the message size. Signed-off-by: Petr Mladek <pmladek@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03printk: use also the last bytes in the ring bufferPetr Mladek1-2/+2
It seems that we have newer used the last byte in the ring buffer. In fact, we have newer used the last 4 bytes because of padding. First problem is in the check for free space. The exact number of free bytes is enough to store the length of data. Second problem is in the check where the ring buffer is rotated. The left side counts the first unused index. It is unused, so it might be the same as the size of the buffer. Note that the first problem has to be fixed together with the second one. Otherwise, the buffer is rotated even when there is enough space on the end of the buffer. Then the beginning of the buffer is rewritten and valid entries get corrupted. Signed-off-by: Petr Mladek <pmladek@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03printk: add comment about tricky check for text buffer sizePetr Mladek1-0/+5
There is no check for potential "text_len" overflow. It is not needed because only valid level is detected. It took me some time to understand why. It would deserve a comment ;-) Signed-off-by: Petr Mladek <pmladek@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03printk: remove obsolete check for log level "c"Petr Mladek1-2/+0
The kernel log level "c" was removed in commit 61e99ab8e35a ("printk: remove the now unnecessary "C" annotation for KERN_CONT"). It is no longer detected in printk_get_level(). Hence we do not need to check it in vprintk_emit. Signed-off-by: Petr Mladek <pmladek@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03kernel/resource.c: make reallocate_resource() staticDaeseok Youn1-1/+1
sparse says: kernel/resource.c:518:5: warning: symbol 'reallocate_resource' was not declared. Should it be static? Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03kernel: audit/fix non-modular users of module_init in core codePaul Gortmaker6-9/+7
Code that is obj-y (always built-in) or dependent on a bool Kconfig (built-in or absent) can never be modular. So using module_init as an alias for __initcall can be somewhat misleading. Fix these up now, so that we can relocate module_init from init.h into module.h in the future. If we don't do this, we'd have to add module.h to obviously non-modular code, and that would be a worse thing. The audit targets the following module_init users for change: kernel/user.c obj-y kernel/kexec.c bool KEXEC (one instance per arch) kernel/profile.c bool PROFILING kernel/hung_task.c bool DETECT_HUNG_TASK kernel/sched/stats.c bool SCHEDSTATS kernel/user_namespace.c bool USER_NS Note that direct use of __initcall is discouraged, vs. one of the priority categorized subgroups. As __initcall gets mapped onto device_initcall, our use of subsys_initcall (which makes sense for these files) will thus change this registration from level 6-device to level 4-subsys (i.e. slightly earlier). However no observable impact of that difference has been observed during testing. Also, two instances of missing ";" at EOL are fixed in kexec. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03fs, kernel: permit disabling the uselib syscallJosh Triplett1-0/+1
uselib hasn't been used since libc5; glibc does not use it. Support turning it off. When disabled, also omit the load_elf_library implementation from binfmt_elf.c, which only uselib invokes. bloat-o-meter: add/remove: 0/4 grow/shrink: 0/1 up/down: 0/-785 (-785) function old new delta padzero 39 36 -3 uselib_flags 20 - -20 sys_uselib 168 - -168 SyS_uselib 168 - -168 load_elf_library 426 - -426 The new CONFIG_USELIB defaults to `y'. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03kernel/groups.c: remove return value of set_groupsWang YanQing1-12/+2
After commit 6307f8fee295 ("security: remove dead hook task_setgroups"), set_groups will always return zero, so we could just remove return value of set_groups. This patch reduces code size, and simplfies code to use set_groups, because we don't need to check its return value any more. [akpm@linux-foundation.org: remove obsolete claims from set_groups() comment] Signed-off-by: Wang YanQing <udknight@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03sys_sysfs: Add CONFIG_SYSFS_SYSCALLFabian Frederick1-0/+1
sys_sysfs is an obsolete system call no longer supported by libc. - This patch adds a default CONFIG_SYSFS_SYSCALL=y - Option can be turned off in expert mode. - cond_syscall added to kernel/sys_ni.c [akpm@linux-foundation.org: tweak Kconfig help text] Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>