summaryrefslogtreecommitdiffstats
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2013-03-13Merge branch 'akpm' (fixes from Andrew)Linus Torvalds2-3/+7
Merge misc fixes from Andrew Morton: - A bunch of fixes - Finish off the idr API conversions before someone starts to use the old interfaces again. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: idr: idr_alloc() shouldn't trigger lowmem warning when preloaded UAPI: fix endianness conditionals in M32R's asm/stat.h UAPI: fix endianness conditionals in linux/raid/md_p.h UAPI: fix endianness conditionals in linux/acct.h UAPI: fix endianness conditionals in linux/aio_abi.h decompressors: fix typo "POWERPC" mm/fremap.c: fix oops on error path idr: deprecate idr_pre_get() and idr_get_new[_above]() tidspbridge: convert to idr_alloc() zcache: convert to idr_alloc() mlx4: remove leftover idr_pre_get() call workqueue: convert to idr_alloc() nfsd: convert to idr_alloc() nfsd: remove unused get_new_stid() kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER signal: always clear sa_restorer on execve mm: remove_memory(): fix end_pfn setting include/linux/res_counter.h needs errno.h
2013-03-13workqueue: convert to idr_alloc()Tejun Heo1-3/+4
idr_get_new*() and friends are about to be deprecated. Convert to the new idr_alloc() interface. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORERAndrew Morton1-1/+1
__ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and later kernels, per Kees. Cc: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13signal: always clear sa_restorer on execveKees Cook1-0/+3
When the new signal handlers are set up, the location of sa_restorer is not cleared, leaking a parent process's address space location to children. This allows for a potential bypass of the parent's ASLR by examining the sa_restorer value returned when calling sigaction(). Based on what should be considered "secret" about addresses, it only matters across the exec not the fork (since the VMAs haven't changed until the exec). But since exec sets SIG_DFL and keeps sa_restorer, this is where it should be fixed. Given the few uses of sa_restorer, a "set" function was not written since this would be the only use. Instead, we use __ARCH_HAS_SA_RESTORER, as already done in other places. Example of the leak before applying this patch: $ cat /proc/$$/maps ... 7fb9f3083000-7fb9f3238000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... $ ./leak ... 7f278bc74000-7f278be29000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... 1 0 (nil) 0x7fb9f30b94a0 2 4000000 (nil) 0x7f278bcaa4a0 3 4000000 (nil) 0x7f278bcaa4a0 4 0 (nil) 0x7fb9f30b94a0 ... [akpm@linux-foundation.org: use SA_RESTORER for backportability] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-13userns: Don't allow CLONE_NEWUSER | CLONE_FSEric W. Biederman2-1/+8
Don't allowing sharing the root directory with processes in a different user namespace. There doesn't seem to be any point, and to allow it would require the overhead of putting a user namespace reference in fs_struct (for permission checks) and incrementing that reference count on practically every call to fork. So just perform the inexpensive test of forbidding sharing fs_struct acrosss processes in different user namespaces. We already disallow other forms of threading when unsharing a user namespace so this should be no real burden in practice. This updates setns, clone, and unshare to disallow multiple user namespaces sharing an fs_struct. Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12futex: fix kernel-doc notation and spelloRandy Dunlap1-23/+23
Fix kernel-doc warning in futex.c and convert 'Returns' to the new Return: kernel-doc notation format. Warning(kernel/futex.c:2286): Excess function parameter 'clockrt' description in 'futex_wait_requeue_pi' Fix one spello. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12signals: fix new kernel-doc warningsRandy Dunlap1-1/+1
Fix new kernel-doc warnings in kernel/signal.c: Warning(kernel/signal.c:2689): No description found for parameter 'uset' Warning(kernel/signal.c:2689): Excess function parameter 'set' description in 'sys_rt_sigpending' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-13/+38
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc minor fixes mostly related to tracing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: s390: Fix a header dependencies related build error tracing: update documentation of snapshot utility tracing: Do not return EINVAL in snapshot when not allocated tracing: Add help of snapshot feature when snapshot is empty ftrace: Update the kconfig for DYNAMIC_FTRACE
2013-03-08Revert parts of "hlist: drop the node parameter from iterators"Arnd Bergmann1-1/+1
Commit b67bfe0d42ca ("hlist: drop the node parameter from iterators") did a lot of nice changes but also contains two small hunks that seem to have slipped in accidentally and have no apparent connection to the intent of the patch. This reverts the two extraneous changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-07tracing: Do not return EINVAL in snapshot when not allocatedSteven Rostedt (Red Hat)1-2/+0
To use the tracing snapshot feature, writing a '1' into the snapshot file causes the snapshot buffer to be allocated if it has not already been allocated and dose a 'swap' with the main buffer, so that the snapshot now contains what was in the main buffer, and the main buffer now writes to what was the snapshot buffer. To free the snapshot buffer, a '0' is written into the snapshot file. To clear the snapshot buffer, any number but a '0' or '1' is written into the snapshot file. But if the file is not allocated it returns -EINVAL error code. This is rather pointless. It is better just to do nothing and return success. Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-07tracing: Add help of snapshot feature when snapshot is emptySteven Rostedt (Red Hat)1-1/+24
When cat'ing the snapshot file, instead of showing an empty trace header like the trace file does, show how to use the snapshot feature. Also, this is a good place to show if the snapshot has been allocated or not. Users may want to "pre allocate" the snapshot to have a fast "swap" of the current buffer. Otherwise, a swap would be slow and might fail as it would need to allocate the snapshot buffer, and that might fail under tight memory constraints. Here's what it looked like before: # tracer: nop # # entries-in-buffer/entries-written: 0/0 #P:4 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | Here's what it looks like now: # tracer: nop # # # * Snapshot is freed * # # Snapshot commands: # echo 0 > snapshot : Clears and frees snapshot buffer # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated. # Takes a snapshot of the main buffer. # echo 2 > snapshot : Clears snapshot buffer (but does not allocate) # (Doesn't have to be '2' works with any number that # is not a '0' or '1') Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-05Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-12/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes and cleanups from Thomas Gleixner: "Commit e5ab012c3271 ("nohz: Make tick_nohz_irq_exit() irq safe") is the first commit in the series and the minimal necessary bugfix, which needs to go back into stable. The remanining commits enforce irq disabling in irq_exit(), sanitize the hardirq/softirq preempt count transition and remove a bunch of no longer necessary conditionals." I personally love getting rid of the very subtle and confusing IRQ_EXIT_OFFSET thing. Even apart from the whole "more lines removed than added" thing. * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irq: Don't re-enable interrupts at the end of irq_exit irq: Remove IRQ_EXIT_OFFSET workaround Revert "nohz: Make tick_nohz_irq_exit() irq safe" irq: Sanitize invoke_softirq irq: Ensure irq_exit() code runs with interrupts disabled nohz: Make tick_nohz_irq_exit() irq safe
2013-03-05Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smpboot bugfix from Thomas Gleixner: "A single bugfix for a regression introduced with the conversion of the stop machine threads to the generic smpboot thread management facility" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stop_machine: Mark per cpu stopper enabled early
2013-03-03Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more VFS bits from Al Viro: "Unfortunately, it looks like xattr series will have to wait until the next cycle ;-/ This pile contains 9p cleanups and fixes (races in v9fs_fid_add() etc), fixup for nommu breakage in shmem.c, several cleanups and a bit more file_inode() work" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: constify path_get/path_put and fs_struct.c stuff fix nommu breakage in shmem.c cache the value of file_inode() in struct file 9p: if v9fs_fid_lookup() gets to asking server, it'd better have hashed dentry 9p: make sure ->lookup() adds fid to the right dentry 9p: untangle ->lookup() a bit 9p: double iput() in ->lookup() if d_materialise_unique() fails 9p: v9fs_fid_add() can't fail now v9fs: get rid of v9fs_dentry 9p: turn fid->dlist into hlist 9p: don't bother with private lock in ->d_fsdata; dentry->d_lock will do just fine more file_inode() open-coded instances selinux: opened file can't have NULL or negative ->f_path.dentry (In the meantime, the hlist traversal macros have changed, so this required a semantic conflict fixup for the newly hlistified fid->dlist)
2013-03-03Merge tag 'metag-v3.9-rc1-v4' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull new ImgTec Meta architecture from James Hogan: "This adds core architecture support for Imagination's Meta processor cores, followed by some later miscellaneous arch/metag cleanups and fixes which I kept separate to ease review: - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture - A few fixes all over, particularly for symbol prefixes - A few privilege protection fixes - Several cleanups (setup.c includes, split out a lot of metag_ksyms.c) - Fix some missing exports - Convert hugetlb to use vm_unmapped_area() - Copy device tree to non-init memory - Provide dma_get_sgtable()" * tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits) metag: Provide dma_get_sgtable() metag: prom.h: remove declaration of metag_dt_memblock_reserve() metag: copy devicetree to non-init memory metag: cleanup metag_ksyms.c includes metag: move mm/init.c exports out of metag_ksyms.c metag: move usercopy.c exports out of metag_ksyms.c metag: move setup.c exports out of metag_ksyms.c metag: move kick.c exports out of metag_ksyms.c metag: move traps.c exports out of metag_ksyms.c metag: move irq enable out of irqflags.h on SMP genksyms: fix metag symbol prefix on crc symbols metag: hugetlb: convert to vm_unmapped_area() metag: export clear_page and copy_page metag: export metag_code_cache_flush_all metag: protect more non-MMU memory regions metag: make TXPRIVEXT bits explicit metag: kernel/setup.c: sort includes perf: Enable building perf tools for Meta metag: add boot time LNKGET/LNKSET check metag: add __init to metag_cache_probe() ...
2013-03-02Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull sigprocmask compat fix from Al Viro: "generic compat_sys_rt_sigprocmask() had a very dumb braino; I'd spent quite a while staring at the offending commit before finally managing to spot the idiocy ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: fix compat_sys_rt_sigprocmask()
2013-03-02fix compat_sys_rt_sigprocmask()Al Viro1-1/+1
Converting bitmask to 32bit granularity is fine, but we'd better _do_ something with the result. Such as "copy it to userland"... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-02trace/ring_buffer: handle 64bit aligned structsJames Hogan1-2/+4
Some 32 bit architectures require 64 bit values to be aligned (for example Meta which has 64 bit read/write instructions). These require 8 byte alignment of event data too, so use !CONFIG_HAVE_64BIT_ALIGNED_ACCESS instead of !CONFIG_64BIT || CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to decide alignment, and align buffer_data_page::data accordingly. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> (previous version subtly different)
2013-03-02Merge tag 'for_linux-3.9' of ↵Linus Torvalds6-127/+62
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB fixes and cleanups from Jason Wessel: "For a change we removed more code than we added. If people aren't using it we shouldn't be carrying it. :-) Cleanups: - Remove kdb ssb command - there is no in kernel disassembler to support it - Remove kdb ll command - Always caused a kernel oops and there were no bug reports so no one was using this command - Use kernel ARRAY_SIZE macro instead of array computations Fixes: - Stop oops in kdb if user executes kdb_defcmd with args - kdb help command truncated text - ppc64 support for kgdbts - Add missing kconfig option from original kdb port for dealing with catastrophic kernel crashes such that you can reboot automatically on continue from kdb" * tag 'for_linux-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kdb: Remove unhandled ssb command kdb: Prevent kernel oops with kdb_defcmd kdb: Remove the ll command kdb_main: fix help print kdb: Fix overlap in buffers with strcpy Fixed dead ifdef block by adding missing Kconfig option. kdb: Setup basic kdb state before invoking commands via kgdb kdb: use ARRAY_SIZE where possible kgdb/kgdbts: support ppc64 kdb: A fix for kdb command table expansion
2013-03-02Merge tag 'arc-v3.9-rc1-late' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull new ARC architecture from Vineet Gupta: "Initial ARC Linux port with some fixes on top for 3.9-rc1: I would like to introduce the Linux port to ARC Processors (from Synopsys) for 3.9-rc1. The patch-set has been discussed on the public lists since Nov and has received a fair bit of review, specially from Arnd, tglx, Al and other subsystem maintainers for DeviceTree, kgdb... The arch bits are in arch/arc, some asm-generic changes (acked by Arnd), a minor change to PARISC (acked by Helge). The series is a touch bigger for a new port for 2 main reasons: 1. It enables a basic kernel in first sub-series and adds ptrace/kgdb/.. later 2. Some of the fallout of review (DeviceTree support, multi-platform- image support) were added on top of orig series, primarily to record the revision history. This updated pull request additionally contains - fixes due to our GNU tools catching up with the new syscall/ptrace ABI - some (minor) cross-arch Kconfig updates." * tag 'arc-v3.9-rc1-late' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (82 commits) ARC: split elf.h into uapi and export it for userspace ARC: Fixup the current ABI version ARC: gdbserver using regset interface possibly broken ARC: Kconfig cleanup tracking cross-arch Kconfig pruning in merge window ARC: make a copy of flat DT ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed" ARC: Ensure CONFIG_VIRT_TO_BUS is not enabled ARC: Fix pt_orig_r8 access ARC: [3.9] Fallout of hlist iterator update ARC: 64bit RTSC timestamp hardware issue ARC: Don't fiddle with non-existent caches ARC: Add self to MAINTAINERS ARC: Provide a default serial.h for uart drivers needing BASE_BAUD ARC: [plat-arcfpga] defconfig for fully loaded ARC Linux ARC: [Review] Multi-platform image #8: platform registers SMP callbacks ARC: [Review] Multi-platform image #7: SMP common code to use callbacks ARC: [Review] Multi-platform image #6: cpu-to-dma-addr optional ARC: [Review] Multi-platform image #5: NR_IRQS defined by ARC core ARC: [Review] Multi-platform image #4: Isolate platform headers ARC: [Review] Multi-platform image #3: switch to board callback ...
2013-03-02kdb: Remove unhandled ssb commandVincent4-39/+2
The 'ssb' command can only be handled when we have a disassembler, to check for branches, so remove the 'ssb' command for now. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: Prevent kernel oops with kdb_defcmdJason Wessel1-2/+6
The kdb_defcmd can only be used to display the available command aliases while using the kernel debug shell. If you try to define a new macro while the kernel debugger is active it will oops. The debug shell macros must use pre-allocated memory set aside at the time kdb_init() is run, and the kdb_defcmd is restricted to only working at the time that the kdb_init sequence is being run, which only occurs if you actually activate the kernel debugger. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: Remove the ll commandJason Wessel1-65/+0
Recently some code inspection was done after fixing a problem with kmalloc used while in the kernel debugger context (which is not legal), and it turned up the fact that kdb ll command will oops the kernel. Given that there have been zero bug reports on the command combined with the fact it will oops the kernel it is clearly not being used. Instead of fixing it, it will be removed. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb_main: fix help printJason Wessel1-3/+7
The help command was chopping all the usage instructions such that they were not readable. Example: bta [D|R|S|T|C|Z|E|U|I| Backtrace all processes matching state flag per_cpu <sym> [<bytes>] [<c Display per_cpu variables Where as it should look like: bta [D|R|S|T|C|Z|E|U|I|M|A] Backtrace all processes matching state flag per_cpu <sym> [<bytes>] [<cpu>] Display per_cpu variables All that is needed is to check the how long the cmd_usage is and jump to the next line when appropriate. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: Fix overlap in buffers with strcpyJason Wessel1-9/+21
Maxime reported that strcpy(s->usage, s->usage+1) has no definitive guarantee that it will work on all archs the same way when you have overlapping memory. The fix is simple for the kdb code because we still have the original string memory in the function scope, so we just have to use that as the argument instead. Reported-by: Maxime Villard <rustyBSD@gmx.fr> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: Setup basic kdb state before invoking commands via kgdbMatt Klein3-6/+23
Although invasive kdb commands are not supported via kgdb, some useful non-invasive commands like bt* require basic kdb state to be setup before calling into the kdb code. Factor out some of this code and call it before and after executing kdb commands via kgdb. Signed-off-by: Matt Klein <mklein@twitter.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: use ARRAY_SIZE where possibleSasha Levin1-2/+2
Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: A fix for kdb command table expansionJohn Blackwood1-1/+1
When locally adding in some additional kdb commands, I stumbled across an issue with the dynamic expansion of the kdb command table. When the number of kdb commands exceeds the size of the statically allocated kdb_base_commands[] array, additional space is allocated in the kdb_register_repeat() routine. The unused portion of the newly allocated array was not being initialized to zero properly and this would result in segfaults when help '?' was executed or when a search for a non-existing command would traverse the command table beyond the end of valid command entries and then attempt to use the non-zeroed area as actual command entries. Signed-off-by: John Blackwood <john.blackwood@ccur.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-02-28Merge branch 'release' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Highlights: - introduction of Dove thermal sensor driver. - introduction of Kirkwood thermal sensor driver. - introduction of intel_powerclamp thermal cooling device driver. - add interrupt and DT support for rcar thermal driver. - add thermal emulation support which allows platform thermal driver to do software/hardware emulation for thermal issues." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits) thermal: rcar: remove __devinitconst thermal: return an error on failure to register thermal class Thermal: rename thermal governor Kconfig option to avoid generic naming thermal: exynos: Use the new thermal trend type for quick cooling action. Thermal: exynos: Add support for temperature falling interrupt. Thermal: Dove: Add Themal sensor support for Dove. thermal: Add support for the thermal sensor on Kirkwood SoCs thermal: rcar: add Device Tree support thermal: rcar: remove machine_power_off() from rcar_thermal_notify() thermal: rcar: add interrupt support thermal: rcar: add read/write functions for common/priv data thermal: rcar: multi channel support thermal: rcar: use mutex lock instead of spin lock thermal: rcar: enable CPCTL to use hardware TSC deciding thermal: rcar: use parenthesis on macro Thermal: fix a build warning when CONFIG_THERMAL_EMULATION cleared Thermal: fix a wrong comment thermal: sysfs: Add a new sysfs node emul_temp for thermal emulation PM: intel_powerclamp: off by one in start_power_clamp() thermal: exynos: Miscellaneous fixes to support falling threshold interrupt ...
2013-02-28Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-blockLinus Torvalds2-8/+77
Pull block IO core bits from Jens Axboe: "Below are the core block IO bits for 3.9. It was delayed a few days since my workstation kept crashing every 2-8h after pulling it into current -git, but turns out it is a bug in the new pstate code (divide by zero, will report separately). In any case, it contains: - The big cfq/blkcg update from Tejun and and Vivek. - Additional block and writeback tracepoints from Tejun. - Improvement of the should sort (based on queues) logic in the plug flushing. - _io() variants of the wait_for_completion() interface, using io_schedule() instead of schedule() to contribute to io wait properly. - Various little fixes. You'll get two trivial merge conflicts, which should be easy enough to fix up" Fix up the trivial conflicts due to hlist traversal cleanups (commit b67bfe0d42ca: "hlist: drop the node parameter from iterators"). * 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits) block: remove redundant check to bd_openers() block: use i_size_write() in bd_set_size() cfq: fix lock imbalance with failed allocations drivers/block/swim3.c: fix null pointer dereference block: don't select PERCPU_RWSEM block: account iowait time when waiting for completion of IO request sched: add wait_for_completion_io[_timeout] writeback: add more tracepoints block: add block_{touch|dirty}_buffer tracepoint buffer: make touch_buffer() an exported function block: add @req to bio_{front|back}_merge tracepoints block: add missing block_bio_complete() tracepoint block: Remove should_sort judgement when flush blk_plug block,elevator: use new hashtable implementation cfq-iosched: add hierarchical cfq_group statistics cfq-iosched: collect stats from dead cfqgs cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats() blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock block: RCU free request_queue blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge() ...
2013-02-28irq: Don't re-enable interrupts at the end of irq_exitFrederic Weisbecker1-6/+1
Commit 74eed0163d0def3fce27228d9ccf3d36e207b286 "irq: Ensure irq_exit() code runs with interrupts disabled" restore interrupts flags in the end of irq_exit() for archs that don't define __ARCH_IRQ_EXIT_IRQS_DISABLED. However always returning from irq_exit() with interrupts disabled should not be a problem for these archs. Prior to this commit this was already happening anytime we processed pending softirqs anyway. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-02-27Merge branch 'akpm' (final batch from Andrew)Linus Torvalds25-779/+120
Merge third patch-bumb from Andrew Morton: "This wraps me up for -rc1. - Lots of misc stuff and things which were deferred/missed from patchbombings 1 & 2. - ocfs2 things - lib/scatterlist - hfsplus - fatfs - documentation - signals - procfs - lockdep - coredump - seqfile core - kexec - Tejun's large IDR tree reworkings - ipmi - partitions - nbd - random() things - kfifo - tools/testing/selftests updates - Sasha's large and pointless hlist cleanup" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (163 commits) hlist: drop the node parameter from iterators kcmp: make it depend on CHECKPOINT_RESTORE selftests: add a simple doc tools/testing/selftests/Makefile: rearrange targets selftests/efivarfs: add create-read test selftests/efivarfs: add empty file creation test selftests: add tests for efivarfs kfifo: fix kfifo_alloc() and kfifo_init() kfifo: move kfifo.c from kernel/ to lib/ arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS w1: add support for DS2413 Dual Channel Addressable Switch memstick: move the dereference below the NULL test drivers/pps/clients/pps-gpio.c: use devm_kzalloc Documentation/DMA-API-HOWTO.txt: fix typo include/linux/eventfd.h: fix incorrect filename is a comment mtd: mtd_stresstest: use prandom_bytes() mtd: mtd_subpagetest: convert to use prandom library mtd: mtd_speedtest: use prandom_bytes mtd: mtd_pagetest: convert to use prandom library mtd: mtd_oobtest: convert to use prandom library ...
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin12-71/+46
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27kcmp: make it depend on CHECKPOINT_RESTORECyrill Gorcunov1-3/+1
Since kcmp syscall has been implemented (initially on x86 architecture) a number of other archs wire it up as well: xtensa, sparc, sh, s390, mips, microblaze, m68k (not taking into account those who uses <asm-generic/unistd.h> for syscall numbers definitions). But the Makefile, which turns kcmp.o generation on still depends on former config-x86. Thus get rid of this limitation and make kcmp.o depend on CHECKPOINT_RESTORE option. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27kfifo: move kfifo.c from kernel/ to lib/Stefani Seibold2-610/+1
Move kfifo.c from kernel/ to lib/ Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27kernel/utsname.c: fix wrong comment about clone_uts_ns()Yuanhan Liu1-1/+1
Fix the wrong comment about the return value of clone_uts_ns() Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27kernel/utsname_sysctl.c: put get/get_uts() into CONFIG_PROC_SYSCTL code blockYuanhan Liu1-1/+2
Put get/get_uts() into CONFIG_PROC_SYSCTL code block as they are used only when CONFIG_PROC_SYSCTL is enabled. Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27sysctl: fix null checking in bin_dn_node_address()Xi Wang1-1/+2
The null check of `strchr() + 1' is broken, which is always non-null, leading to OOB read. Instead, check the result of strchr(). Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27posix-timers: convert to idr_alloc()Tejun Heo1-10/+8
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27events: convert to idr_alloc()Tejun Heo1-7/+3
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27cgroup: convert to idr_alloc()Tejun Heo1-19/+8
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27cgroup: don't use idr_remove_all()Tejun Heo1-3/+1
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27kexec: avoid freeing NULL pointer in image_crash_alloc()Zhang Yanfei1-8/+7
Though there is no error if we free a NULL pointer, I think we could avoid this behaviour. Change the code a little in kimage_crash_alloc() could avoid this kind of unnecessary free. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sasha Levin <sasha.levin@oracle.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27kexec: fix memory leak in function kimage_normal_allocZhang Yanfei1-8/+10
If kimage_normal_alloc() fails to alloc pages for image->swap_page, it should call kimage_free_page_list() to free allocated pages in image->control_pages list before it frees image. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sasha Levin <sasha.levin@oracle.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27kexec: prevent double free on image allocation failureSasha Levin1-2/+0
If kimage_normal_alloc() fails to initialize an allocated kimage, it will free the image but would still set 'rimage', as a result kexec_load will try to free it again. This would explode as part of the freeing process is accessing internal members which point to uninitialized memory. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27kexec: export PG_hwpoison flag into vmcoreinfoMitsuhiro Tanino1-0/+3
This patch exports a PG_hwpoison into vmcoreinfo when CONFIG_MEMORY_FAILURE is defined. "makedumpfile" needs to read information of memory, such as 'mem_section', 'zone', 'pageflags' from vmcore. We introduce a function into "makedumpfile" to exclude hwpoison page from vmcore dump. In order to introduce this function, PG_hwpoison flag have to export into vmcoreinfo. Signed-off-by: Mitsuhiro Tanino <mitsuhiro.tanino.gm@hitachi.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Mitsuhiro Tanino <mitsuhiro.tanino.gm@hitachi.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27kexec: get rid of duplicate check for hole_endZhang Yanfei1-2/+0
hole_end has been checked to make sure it is <= crash_res.end in the while condition check, so the if condition check is duplicate. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27kexec: add the values related to buddy system for filtering free pages.Atsushi Kumagai1-0/+4
tAdd adds the values related to buddy system to vmcoreinfo data so that makedumpfile (dump filtering command) can filter out all free pages with the new logic. It's faster than the current logic because it can distinguish free page by analyzing page structure at the same time as filtering for other unnecessary pages (e.g. anonymous page). OTOH, the current logic has to trace free_list to distinguish free pages while analyzing page structure to filter out other unnecessary pages. The new logic uses the fact that buddy page is marked by _mapcount == PAGE_BUDDY_MAPCOUNT_VALUE. But, _mapcount shares its memory with other fields for SLAB/SLUB when PG_slab is set, so we need to check if PG_slab is set or not before looking up _mapcount value. And we can get the order of buddy system from private field. To sum it up, the values below are required for this logic. Required values: - OFFSET(page._mapcount) - OFFSET(page.private) - NUMBER(PG_slab) - NUMBER(PAGE_BUDDY_MAPCOUNT_VALUE) Changelog from v1 to v2: 1. remove SIZE(pageflags) The new logic was changed after I sent v1 patch. Accordingly, SIZE(pageflags) has been unnecessary for makedumpfile. What's makedumpfile: makedumpfile creates a small dumpfile by excluding unnecessary pages for the analysis. To distinguish unnecessary pages, makedumpfile gets the vmcoreinfo data which has the minimum debugging information only for dump filtering. Signed-off-by: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27fork: unshare: remove dead codeAlan Cox1-6/+1
If new_nsproxy is set we will always call switch_task_namespaces and then set new_nsproxy back to NULL so the reassignment and fall through check are redundant Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27coredump: use a freezable_schedule for the coredump_finish waitMandeep Singh Baines1-2/+2
Prevents hung_task detector from panicing the machine. This is also needed to prevent this wait from blocking suspend. (It doesnt' currently block suspend but it would once the next patch in this series is applied.) [yongjun_wei@trendmicro.com.cn: kernel/exit.c: remove duplicated include] Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Cc: Ben Chan <benchan@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>