summaryrefslogtreecommitdiffstats
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2019-08-12sched/fair: Use rq_lock/unlock in online_fair_sched_groupPhil Auld1-3/+3
Enabling WARN_DOUBLE_CLOCK in /sys/kernel/debug/sched_features causes warning to fire in update_rq_clock. This seems to be caused by onlining a new fair sched group not using the rq lock wrappers. [] rq->clock_update_flags & RQCF_UPDATED [] WARNING: CPU: 5 PID: 54385 at kernel/sched/core.c:210 update_rq_clock+0xec/0x150 [] Call Trace: [] online_fair_sched_group+0x53/0x100 [] cpu_cgroup_css_online+0x16/0x20 [] online_css+0x1c/0x60 [] cgroup_apply_control_enable+0x231/0x3b0 [] cgroup_mkdir+0x41b/0x530 [] kernfs_iop_mkdir+0x61/0xa0 [] vfs_mkdir+0x108/0x1a0 [] do_mkdirat+0x77/0xe0 [] do_syscall_64+0x55/0x1d0 [] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Using the wrappers in online_fair_sched_group instead of the raw locking removes this warning. [ tglx: Use rq_*lock_irq() ] Signed-off-by: Phil Auld <pauld@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20190801133749.11033-1-pauld@redhat.com
2019-08-08cpufreq: schedutil: fix equation in commentQais Yousef1-3/+3
scale_irq_capacity() call in schedutil_cpu_util() does util *= (max - irq) util /= max But the comment says util *= (1 - irq) util /= max Fix the comment to match what the scaling function does. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net> Link: https://lkml.kernel.org/r/20190802104628.8410-1-qais.yousef@arm.com
2019-08-08sched: Rework pick_next_task() slow-pathPeter Zijlstra7-73/+34
Avoid the RETRY_TASK case in the pick_next_task() slow path. By doing the put_prev_task() early, we get the rt/deadline pull done, and by testing rq->nr_running we know if we need newidle_balance(). This then gives a stable state to pick a task from. Since the fast-path is fair only; it means the other classes will always have pick_next_task(.prev=NULL, .rf=NULL) and we can simplify. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/aa34d24b36547139248f32a30138791ac6c02bd6.1559129225.git.vpillai@digitalocean.com
2019-08-08sched: Allow put_prev_task() to drop rq->lockPeter Zijlstra7-8/+32
Currently the pick_next_task() loop is convoluted and ugly because of how it can drop the rq->lock and needs to restart the picking. For the RT/Deadline classes, it is put_prev_task() where we do balancing, and we could do this before the picking loop. Make this possible. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/e4519f6850477ab7f3d257062796e6425ee4ba7c.1559129225.git.vpillai@digitalocean.com
2019-08-08sched/fair: Expose newidle_balance()Peter Zijlstra2-10/+12
For pick_next_task_fair() it is the newidle balance that requires dropping the rq->lock; provided we do put_prev_task() early, we can also detect the condition for doing newidle early. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/9e3eb1859b946f03d7e500453a885725b68957ba.1559129225.git.vpillai@digitalocean.com
2019-08-08sched: Add task_struct pointer to sched_class::set_curr_taskPeter Zijlstra7-46/+48
In preparation of further separating pick_next_task() and set_curr_task() we have to pass the actual task into it, while there, rename the thing to better pair with put_prev_task(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/a96d1bcdd716db4a4c5da2fece647a1456c0ed78.1559129225.git.vpillai@digitalocean.com
2019-08-08sched: Rework CPU hotplug task selectionPeter Zijlstra2-18/+15
The CPU hotplug task selection is the only place where we used put_prev_task() on a task that is not current. While looking at that, it occured to me that we can simplify all that by by using a custom pick loop. Since we don't need to put current, we can do away with the fake task too. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
2019-08-08sched/{rt,deadline}: Fix set_next_task vs pick_next_taskPeter Zijlstra2-24/+24
Because pick_next_task() implies set_curr_task() and some of the details haven't mattered too much, some of what _should_ be in set_curr_task() ended up in pick_next_task, correct this. This prepares the way for a pick_next_task() variant that does not affect the current state; allowing remote picking. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/38c61d5240553e043c27c5e00b9dd0d184dd6081.1559129225.git.vpillai@digitalocean.com
2019-08-08sched: Fix kerneldoc comment for ia64_set_curr_taskPeter Zijlstra1-1/+1
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/fde3a65ea3091ec6b84dac3c19639f85f452c5d1.1559129225.git.vpillai@digitalocean.com
2019-08-08stop_machine: Fix stop_cpus_in_progress orderingPeter Zijlstra1-0/+2
Make sure the entire for loop has stop_cpus_in_progress set. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lwe@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: mingo@kernel.org Cc: Phil Auld <pauld@redhat.com> Cc: Julien Desfossez <jdesfossez@digitalocean.com> Cc: Nishanth Aravamudan <naravamudan@digitalocean.com> Link: https://lkml.kernel.org/r/0fd8fd4b99b9b9aa88d8b2dff897f7fd0d88f72c.1559129225.git.vpillai@digitalocean.com
2019-08-08sched/fair: Fix low cpu usage with high throttling by removing expiration of ↵Dave Chiluk2-69/+7
cpu-local slices It has been observed, that highly-threaded, non-cpu-bound applications running under cpu.cfs_quota_us constraints can hit a high percentage of periods throttled while simultaneously not consuming the allocated amount of quota. This use case is typical of user-interactive non-cpu bound applications, such as those running in kubernetes or mesos when run on multiple cpu cores. This has been root caused to cpu-local run queue being allocated per cpu bandwidth slices, and then not fully using that slice within the period. At which point the slice and quota expires. This expiration of unused slice results in applications not being able to utilize the quota for which they are allocated. The non-expiration of per-cpu slices was recently fixed by 'commit 512ac999d275 ("sched/fair: Fix bandwidth timer clock drift condition")'. Prior to that it appears that this had been broken since at least 'commit 51f2176d74ac ("sched/fair: Fix unlocked reads of some cfs_b->quota/period")' which was introduced in v3.16-rc1 in 2014. That added the following conditional which resulted in slices never being expired. if (cfs_rq->runtime_expires != cfs_b->runtime_expires) { /* extend local deadline, drift is bounded above by 2 ticks */ cfs_rq->runtime_expires += TICK_NSEC; Because this was broken for nearly 5 years, and has recently been fixed and is now being noticed by many users running kubernetes (https://github.com/kubernetes/kubernetes/issues/67577) it is my opinion that the mechanisms around expiring runtime should be removed altogether. This allows quota already allocated to per-cpu run-queues to live longer than the period boundary. This allows threads on runqueues that do not use much CPU to continue to use their remaining slice over a longer period of time than cpu.cfs_period_us. However, this helps prevent the above condition of hitting throttling while also not fully utilizing your cpu quota. This theoretically allows a machine to use slightly more than its allotted quota in some periods. This overflow would be bounded by the remaining quota left on each per-cpu runqueueu. This is typically no more than min_cfs_rq_runtime=1ms per cpu. For CPU bound tasks this will change nothing, as they should theoretically fully utilize all of their quota in each period. For user-interactive tasks as described above this provides a much better user/application experience as their cpu utilization will more closely match the amount they requested when they hit throttling. This means that cpu limits no longer strictly apply per period for non-cpu bound applications, but that they are still accurate over longer timeframes. This greatly improves performance of high-thread-count, non-cpu bound applications with low cfs_quota_us allocation on high-core-count machines. In the case of an artificial testcase (10ms/100ms of quota on 80 CPU machine), this commit resulted in almost 30x performance improvement, while still maintaining correct cpu quota restrictions. That testcase is available at https://github.com/indeedeng/fibtest. Fixes: 512ac999d275 ("sched/fair: Fix bandwidth timer clock drift condition") Signed-off-by: Dave Chiluk <chiluk+linux@indeed.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Phil Auld <pauld@redhat.com> Reviewed-by: Ben Segall <bsegall@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: John Hammond <jhammond@indeed.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kyle Anderson <kwa@yelp.com> Cc: Gabriel Munos <gmunoz@netflix.com> Cc: Peter Oskolkov <posk@posk.io> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Brendan Gregg <bgregg@netflix.com> Link: https://lkml.kernel.org/r/1563900266-19734-2-git-send-email-chiluk+linux@indeed.com
2019-08-08sched: Clean up active_mm reference countingPeter Zijlstra1-19/+30
The current active_mm reference counting is confusing and sub-optimal. Rewrite the code to explicitly consider the 4 separate cases: user -> user When switching between two user tasks, all we need to consider is switch_mm(). user -> kernel When switching from a user task to a kernel task (which doesn't have an associated mm) we retain the last mm in our active_mm. Increment a reference count on active_mm. kernel -> kernel When switching between kernel threads, all we need to do is pass along the active_mm reference. kernel -> user When switching between a kernel and user task, we must switch from the last active_mm to the next mm, hoping of course that these are the same. Decrement a reference on the active_mm. The code keeps a different order, because as you'll note, both 'to user' cases require switch_mm(). And where the old code would increment/decrement for the 'kernel -> kernel' case, the new code observes this is a neutral operation and avoids touching the reference count. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: luto@kernel.org
2019-08-08rcu/tree: Fix SCHED_FIFO paramsPeter Zijlstra1-3/+3
A rather embarrasing mistake had us call sched_setscheduler() before initializing the parameters passed to it. Fixes: 1a763fd7c633 ("rcu/tree: Call setschedule() gp ktread to SCHED_FIFO outside of atomic region") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Juri Lelli <juri.lelli@redhat.com>
2019-07-25sched/core: Silence a warning in sched_init()Qian Cai1-5/+5
Compiling a kernel with both FAIR_GROUP_SCHED=n and RT_GROUP_SCHED=n will generate a compiler warning: kernel/sched/core.c: In function 'sched_init': kernel/sched/core.c:5906:32: warning: variable 'ptr' set but not used It is unnecessary to have both "alloc_size" and "ptr", so just combine them. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: valentin.schneider@arm.com Link: https://lkml.kernel.org/r/20190720012319.884-1-cai@lca.pw Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/core: Fix CPU controller for !RT_GROUP_SCHEDJuri Lelli1-4/+0
On !CONFIG_RT_GROUP_SCHED configurations it is currently not possible to move RT tasks between cgroups to which CPU controller has been attached; but it is oddly possible to first move tasks around and then make them RT (setschedule to FIFO/RR). E.g.: # mkdir /sys/fs/cgroup/cpu,cpuacct/group1 # chrt -fp 10 $$ # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks bash: echo: write error: Invalid argument # chrt -op 0 $$ # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks # chrt -fp 10 $$ # cat /sys/fs/cgroup/cpu,cpuacct/group1/tasks 2345 2598 # chrt -p 2345 pid 2345's current scheduling policy: SCHED_FIFO pid 2345's current scheduling priority: 10 Also, as Michal noted, it is currently not possible to enable CPU controller on unified hierarchy with !CONFIG_RT_GROUP_SCHED (if there are any kernel RT threads in root cgroup, they can't be migrated to the newly created CPU controller's root in cgroup_update_dfl_csses()). Existing code comes with a comment saying the "we don't support RT-tasks being in separate groups". Such comment is however stale and belongs to pre-RT_GROUP_SCHED times. Also, it doesn't make much sense for !RT_GROUP_ SCHED configurations, since checks related to RT bandwidth are not performed at all in these cases. Make moving RT tasks between CPU controller groups viable by removing special case check for RT (and DEADLINE) tasks. Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Michal Koutný <mkoutny@suse.com> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: rostedt@goodmis.org Link: https://lkml.kernel.org/r/20190719063455.27328-1-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/core: Prevent race condition between cpuset and __sched_setscheduler()Juri Lelli2-3/+28
No synchronisation mechanism exists between the cpuset subsystem and calls to function __sched_setscheduler(). As such, it is possible that new root domains are created on the cpuset side while a deadline acceptance test is carried out in __sched_setscheduler(), leading to a potential oversell of CPU bandwidth. Grab cpuset_rwsem read lock from core scheduler, so to prevent situations such as the one described above from happening. The only exception is normalize_rt_tasks() which needs to work under tasklist_lock and can't therefore grab cpuset_rwsem. We are fine with this, as this function is only called by sysrq and, if that gets triggered, DEADLINE guarantees are already gone out of the window anyway. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: mathieu.poirier@linaro.org Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-9-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25rcu/tree: Call setschedule() gp ktread to SCHED_FIFO outside of atomic regionJuri Lelli1-3/+3
sched_setscheduler() needs to acquire cpuset_rwsem, but it is currently called from an invalid (atomic) context by rcu_spawn_gp_kthread(). Fix that by simply moving sched_setscheduler_nocheck() call outside of the atomic region, as it doesn't actually require to be guarded by rcu_node lock. Suggested-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: mathieu.poirier@linaro.org Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-8-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25cgroup/cpuset: Change cpuset_rwsem and hotplug lock orderJuri Lelli1-5/+17
cpuset_rwsem is going to be acquired from sched_setscheduler() with a following patch. There are however paths (e.g., spawn_ksoftirqd) in which sched_scheduler() is eventually called while holding hotplug lock; this creates a dependecy between hotplug lock (to be always acquired first) and cpuset_rwsem (to be always acquired after hotplug lock). Fix paths which currently take the two locks in the wrong order (after a following patch is applied). Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: mathieu.poirier@linaro.org Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-7-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25cgroup/cpuset: Convert cpuset_mutex to percpu_rwsemJuri Lelli1-33/+35
Holding cpuset_mutex means that cpusets are stable (only the holder can make changes) and this is required for fixing a synchronization issue between cpusets and scheduler core. However, grabbing cpuset_mutex from setscheduler() hotpath (as implemented in a later patch) is a no-go, as it would create a bottleneck for tasks concurrently calling setscheduler(). Convert cpuset_mutex to be a percpu_rwsem (cpuset_rwsem), so that setscheduler() will then be able to read lock it and avoid concurrency issues. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: mathieu.poirier@linaro.org Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-6-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/deadline: Fix bandwidth accounting at all levels after offline migrationJuri Lelli1-0/+33
If a task happens to be throttled while the CPU it was running on gets hotplugged off, the bandwidth associated with the task is not correctly migrated with it when the replenishment timer fires (offline_migration). Fix things up, for this_bw, running_bw and total_bw, when replenishment timer fires and task is migrated (dl_task_offline_migration()). Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: mathieu.poirier@linaro.org Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-5-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25cpusets: Rebuild root domain deadline accounting informationMathieu Poirier5-6/+106
When the topology of root domains is modified by CPUset or CPUhotplug operations information about the current deadline bandwidth held in the root domain is lost. This patch addresses the issue by recalculating the lost deadline bandwidth information by circling through the deadline tasks held in CPUsets and adding their current load to the root domain they are associated with. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> [ Various additional modifications. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-4-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/core: Streamle calls to task_rq_unlock()Mathieu Poirier1-10/+14
Calls to task_rq_unlock() are done several times in the __sched_setscheduler() function. This is fine when only the rq lock needs to be handled but not so much when other locks come into play. This patch streamlines the release of the rq lock so that only one location need to be modified when dealing with more than one lock. No change of functionality is introduced by this patch. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-3-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/topology: Add partition_sched_domains_locked()Mathieu Poirier1-4/+13
Introduce the partition_sched_domains_locked() function by taking the mutex locking code out of the original function. That way the work done by partition_sched_domains_locked() can be reused without dropping the mutex lock. No change of functionality is introduced by this patch. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: rostedt@goodmis.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-2-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Introduce fits_capacity()Viresh Kumar1-10/+8
The same formula to check utilization against capacity (after considering capacity_margin) is already used at 5 different locations. This patch creates a new macro, fits_capacity(), which can be used from all these locations without exposing the details of it and hence simplify code. All the 5 code locations are updated as well to use it.. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/b477ac75a2b163048bdaeb37f57b4c3f04f75a31.1559631700.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/isolation: Prefer housekeeping CPU in local nodeWanpeng Li3-5/+35
In real product setup, there will be houseeking CPUs in each nodes, it is prefer to do housekeeping from local node, fallback to global online cpumask if failed to find houseeking CPU from local node. Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1561711901-4755-2-git-send-email-wanpengli@tencent.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/stats: Fix unlikely() use of sched_info_on()Yi Wang1-3/+4
sched_info_on() is called with unlikely hint, however, the test is to be a constant(1) on which compiler will do nothing when make defconfig, so remove the hint. Also, fix a lack of {}. Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: up2wing@gmail.com Cc: wang.liang82@zte.com.cn Cc: xue.zhihong@zte.com.cn Link: https://lkml.kernel.org/r/1562301307-43002-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/core: Convert get_task_struct() to return the taskMatthew Wilcox (Oracle)4-14/+7
Returning the pointer that was passed in allows us to write slightly more idiomatic code. Convert a few users. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190704221323.24290-1-willy@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Fall back to sched-idle CPU if idle CPU isn't foundViresh Kumar1-10/+33
We try to find an idle CPU to run the next task, but in case we don't find an idle CPU it is better to pick a CPU which will run the task the soonest, for performance reason. A CPU which isn't idle but has only SCHED_IDLE activity queued on it should be a good target based on this criteria as any normal fair task will most likely preempt the currently running SCHED_IDLE task immediately. In fact, choosing a SCHED_IDLE CPU over a fully idle one shall give better results as it should be able to run the task sooner than an idle CPU (which requires to be woken up from an idle state). This patch updates both fast and slow paths with this optimization. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: chris.redpath@arm.com Cc: quentin.perret@linaro.org Cc: songliubraving@fb.com Cc: steven.sistare@oracle.com Cc: subhra.mazumdar@oracle.com Cc: tkjos@google.com Link: https://lkml.kernel.org/r/eeafa25fdeb6f6edd5b2da716bc8f0ba7708cbcf.1561523542.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Start tracking SCHED_IDLE tasks count in cfs_rqViresh Kumar2-3/+14
Track how many tasks are present with SCHED_IDLE policy in each cfs_rq. This will be used by later commits. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: chris.redpath@arm.com Cc: quentin.perret@linaro.org Cc: songliubraving@fb.com Cc: steven.sistare@oracle.com Cc: subhra.mazumdar@oracle.com Cc: tkjos@google.com Link: https://lkml.kernel.org/r/0d3cdc427fc68808ad5bccc40e86ed0bf9da8bb4.1561523542.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaintPaul E. McKenney1-8/+49
time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint The TASKS03 and TREE04 rcutorture scenarios produce the following lockdep complaint: WARNING: inconsistent lock state 5.2.0-rc1+ #513 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. migration/1/14 [HC0[0]:SC0[0]:HE1:SE1] takes: (____ptrval____) (tick_broadcast_lock){?...}, at: tick_broadcast_offline+0xf/0x70 {IN-HARDIRQ-W} state was registered at: lock_acquire+0xb0/0x1c0 _raw_spin_lock_irqsave+0x3c/0x50 tick_broadcast_switch_to_oneshot+0xd/0x40 tick_switch_to_oneshot+0x4f/0xd0 hrtimer_run_queues+0xf3/0x130 run_local_timers+0x1c/0x50 update_process_times+0x1c/0x50 tick_periodic+0x26/0xc0 tick_handle_periodic+0x1a/0x60 smp_apic_timer_interrupt+0x80/0x2a0 apic_timer_interrupt+0xf/0x20 _raw_spin_unlock_irqrestore+0x4e/0x60 rcu_nocb_gp_kthread+0x15d/0x590 kthread+0xf3/0x130 ret_from_fork+0x3a/0x50 irq event stamp: 171 hardirqs last enabled at (171): [<ffffffff8a201a37>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (170): [<ffffffff8a201a53>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (0): [<ffffffff8a264ee0>] copy_process.part.56+0x650/0x1cb0 softirqs last disabled at (0): [<0000000000000000>] 0x0 [...] To reproduce, run the following rcutorture test: $ tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TASKS03 TREE04" It turns out that tick_broadcast_offline() was an innocent bystander. After all, interrupts are supposed to be disabled throughout take_cpu_down(), and therefore should have been disabled upon entry to tick_offline_cpu() and thus to tick_broadcast_offline(). This suggests that one of the CPU-hotplug notifiers was incorrectly enabling interrupts, and leaving them enabled on return. Some debugging code showed that the culprit was sched_cpu_dying(). It had irqs enabled after return from sched_tick_stop(). Which in turn had irqs enabled after return from cancel_delayed_work_sync(). Which is a wrapper around __cancel_work_timer(). Which can sleep in the case where something else is concurrently trying to cancel the same delayed work, and as Thomas Gleixner pointed out on IRC, sleeping is a decidedly bad idea when you are invoked from take_cpu_down(), regardless of the state you leave interrupts in upon return. Code inspection located no reason why the delayed work absolutely needed to be canceled from sched_tick_stop(): The work is not bound to the outgoing CPU by design, given that the whole point is to collect statistics without disturbing the outgoing CPU. This commit therefore simply drops the cancel_delayed_work_sync() from sched_tick_stop(). Instead, a new ->state field is added to the tick_work structure so that the delayed-work handler function sched_tick_remote() can avoid reposting itself. A cpu_is_offline() check is also added to sched_tick_remote() to avoid mucking with the state of an offlined CPU (though it does appear safe to do so). The sched_tick_start() and sched_tick_stop() functions also update ->state, and sched_tick_start() also schedules the delayed work if ->state indicates that it is not already in flight. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> [ paulmck: Apply Peter Zijlstra and Frederic Weisbecker atomics feedback. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190625165238.GJ26519@linux.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Fix imbalance due to CPU affinityVincent Guittot1-2/+3
The load_balance() has a dedicated mecanism to detect when an imbalance is due to CPU affinity and must be handled at parent level. In this case, the imbalance field of the parent's sched_group is set. The description of sg_imbalanced() gives a typical example of two groups of 4 CPUs each and 4 tasks each with a cpumask covering 1 CPU of the first group and 3 CPUs of the second group. Something like: { 0 1 2 3 } { 4 5 6 7 } * * * * But the load_balance fails to fix this UC on my octo cores system made of 2 clusters of quad cores. Whereas the load_balance is able to detect that the imbalanced is due to CPU affinity, it fails to fix it because the imbalance field is cleared before letting parent level a chance to run. In fact, when the imbalance is detected, the load_balance reruns without the CPU with pinned tasks. But there is no other running tasks in the situation described above and everything looks balanced this time so the imbalance field is immediately cleared. The imbalance field should not be cleared if there is no other task to move when the imbalance is detected. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1561996022-28829-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Change task_numa_work() storage to staticValentin Schneider1-1/+1
There are no callers outside of fair.c. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: mgorman@suse.de Cc: riel@surriel.com Link: https://lkml.kernel.org/r/20190715102508.32434-4-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Move task_numa_work() init to init_numa_balancing()Valentin Schneider1-4/+5
We only need to set the callback_head worker function once, do it during sched_fork(). While at it, move the comment regarding double task_work addition to init_numa_balancing(), since the double add sentinel is first set there. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: mgorman@suse.de Cc: riel@surriel.com Link: https://lkml.kernel.org/r/20190715102508.32434-3-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Move init_numa_balancing() below task_numa_work()Valentin Schneider1-41/+41
To reference task_numa_work() from within init_numa_balancing(), we need the former to be declared before the latter. Do just that. This is a pure code movement. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: mgorman@suse.de Cc: riel@surriel.com Link: https://lkml.kernel.org/r/20190715102508.32434-2-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Use RCU accessors consistently for ->numa_groupJann Horn1-39/+81
The old code used RCU annotations and accessors inconsistently for ->numa_group, which can lead to use-after-frees and NULL dereferences. Let all accesses to ->numa_group use proper RCU helpers to prevent such issues. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Fixes: 8c8a743c5087 ("sched/numa: Use {cpu, pid} to create task groups for shared faults") Link: https://lkml.kernel.org/r/20190716152047.14424-3-jannh@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25sched/fair: Don't free p->numa_faults with concurrent readersJann Horn2-5/+21
When going through execve(), zero out the NUMA fault statistics instead of freeing them. During execve, the task is reachable through procfs and the scheduler. A concurrent /proc/*/sched reader can read data from a freed ->numa_faults allocation (confirmed by KASAN) and write it back to userspace. I believe that it would also be possible for a use-after-free read to occur through a race between a NUMA fault and execve(): task_numa_fault() can lead to task_numa_compare(), which invokes task_weight() on the currently running task of a different CPU. Another way to fix this would be to make ->numa_faults RCU-managed or add extra locking, but it seems easier to wipe the NUMA fault statistics on execve. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()") Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-22Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull preemption Kconfig fix from Thomas Gleixner: "The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined PREEMPT outside of the menu and made it selectable by both PREEMPT_LL and PREEMPT_RT. Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which obviously can't work anymore. oldconfig builds are affected as well, but it's more obvious as the user gets asked. [old]defconfig silently fixes it up and selects PREEMPT_NONE. Unbreak it by undoing the rename and adding a intermediate config symbol which is selected by both PREEMPT and PREEMPT_RT. That requires to chase down a few #ifdefs, but it's better than tweaking 114 defconfigs and annoying users" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
2019-07-22sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=yThomas Gleixner1-4/+4
The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on the preemption mode choice wich defaults to NONE. This also affects oldconfig builds. So rather than changing 114 defconfig files and being an annoyance to users, revert the rename and select a new config symbol PREEMPTION. That keeps everything working smoothly and the revelant ifdef's are going to be fixed up step by step. Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: a50a3f4b6a31 ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT") Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-07-22pidfd: fix a poll race when setting exit_stateSuren Baghdasaryan1-0/+1
There is a race between reading task->exit_state in pidfd_poll and writing it after do_notify_parent calls do_notify_pidfd. Expected sequence of events is: CPU 0 CPU 1 ------------------------------------------------ exit_notify do_notify_parent do_notify_pidfd tsk->exit_state = EXIT_DEAD pidfd_poll if (tsk->exit_state) However nothing prevents the following sequence: CPU 0 CPU 1 ------------------------------------------------ exit_notify do_notify_parent do_notify_pidfd pidfd_poll if (tsk->exit_state) tsk->exit_state = EXIT_DEAD This causes a polling task to wait forever, since poll blocks because exit_state is 0 and the waiting task is not notified again. A stress test continuously doing pidfd poll and process exits uncovered this bug. To fix it, we make sure that the task's exit_state is always set before calling do_notify_pidfd. Fixes: b53b0b9d9a6 ("pidfd: add polling support") Cc: kernel-team@android.com Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20190717172100.261204-1-joel@joelfernandes.org [christian@brauner.io: adapt commit message and drop unneeded changes from wait_task_zombie] Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-20Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-25/+22
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions: - force unencrypted dma-coherent buffers if encryption bit can't fit into the dma coherent mask (Tom Lendacky) - avoid limiting request size if swiotlb is not used (me) - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang Duan)" * tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device dma-direct: only limit the mapping size if swiotlb could be used dma-mapping: add a dma_addressing_limited helper dma-direct: Force unencrypted DMA under SME for certain DMA masks
2019-07-20Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: - A collection of objtool fixes which address recent fallout partially exposed by newer toolchains, clang, BPF and general code changes. - Force USER_DS for user stack traces [ Note: the "objtool fixes" are not all to objtool itself, but for kernel code that triggers objtool warnings. Things like missing function size annotations, or code that confuses the unwinder etc. - Linus] * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) objtool: Support conditional retpolines objtool: Convert insn type to enum objtool: Fix seg fault on bad switch table entry objtool: Support repeated uses of the same C jump table objtool: Refactor jump table code objtool: Refactor sibling call detection logic objtool: Do frame pointer check before dead end check objtool: Change dead_end_function() to return boolean objtool: Warn on zero-length functions objtool: Refactor function alias logic objtool: Track original function across branches objtool: Add mcsafe_handle_tail() to the uaccess safe list bpf: Disable GCC -fgcse optimization for ___bpf_prog_run() x86/uaccess: Remove redundant CLACs in getuser/putuser error paths x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail() x86/uaccess: Remove ELF function annotation from copy_user_handle_tail() x86/head/64: Annotate start_cpu0() as non-callable x86/entry: Fix thunk function ELF sizes x86/kvm: Don't call kvm_spurious_fault() from .fixup x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2 ...
2019-07-20Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp fix from Thomas Gleixner: "Add warnings to the smp function calls so callers from wrong contexts get detected" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Warn on function calls from softirq context
2019-07-20Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-2/+23
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CONFIG_PREEMPT_RT stub config from Thomas Gleixner: "The real-time preemption patch set exists for almost 15 years now and while the vast majority of infrastructure and enhancements have found their way into the mainline kernel, the final integration of RT is still missing. Over the course of the last few years, we have worked on reducing the intrusivenness of the RT patches by refactoring kernel infrastructure to be more real-time friendly. Almost all of these changes were benefitial to the mainline kernel on their own, so there was no objection to integrate them. Though except for the still ongoing printk refactoring, the remaining changes which are required to make RT a first class mainline citizen are not longer arguable as immediately beneficial for the mainline kernel. Most of them are either reordering code flows or adding RT specific functionality. But this now has hit a wall and turned into a classic hen and egg problem: Maintainers are rightfully wary vs. these changes as they make only sense if the final integration of RT into the mainline kernel takes place. Adding CONFIG_PREEMPT_RT aims to solve this as a clear sign that RT will be fully integrated into the mainline kernel. The final integration of the missing bits and pieces will be of course done with the same careful approach as we have used in the past. While I'm aware that you are not entirely enthusiastic about that, I think that RT should receive the same treatment as any other widely used out of tree functionality, which we have accepted into mainline over the years. RT has become the de-facto standard real-time enhancement and is shipped by enterprise, embedded and community distros. It's in use throughout a wide range of industries: telecommunications, industrial automation, professional audio, medical devices, data acquisition, automotive - just to name a few major use cases. RT development is backed by a Linuxfoundation project which is supported by major stakeholders of this technology. The funding will continue over the actual inclusion into mainline to make sure that the functionality is neither introducing regressions, regressing itself, nor becomes subject to bitrot. There is also a lifely user community around RT as well, so contrary to the grim situation 5 years ago, it's a healthy project. As RT is still a good vehicle to exercise rarely used code paths and to detect hard to trigger issues, you could at least view it as a QA tool if nothing else" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT
2019-07-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+6
Pull more KVM updates from Paolo Bonzini: "Mostly bugfixes, but also: - s390 support for KVM selftests - LAPIC timer offloading to housekeeping CPUs - Extend an s390 optimization for overcommitted hosts to all architectures - Debugging cleanups and improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) KVM: x86: Add fixed counters to PMU filter KVM: nVMX: do not use dangling shadow VMCS after guest reset KVM: VMX: dump VMCS on failed entry KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup KVM: Boost vCPUs that are delivering interrupts KVM: selftests: Remove superfluous define from vmx.c KVM: SVM: Fix detection of AMD Errata 1096 KVM: LAPIC: Inject timer interrupt via posted interrupt KVM: LAPIC: Make lapic timer unpinned KVM: x86/vPMU: reset pmc->counter to 0 for pmu fixed_counters KVM: nVMX: Ignore segment base for VMX memory operand when segment not FS or GS kvm: x86: ioapic and apic debug macros cleanup kvm: x86: some tsc debug cleanup kvm: vmx: fix coccinelle warnings x86: kvm: avoid constant-conversion warning x86: kvm: avoid -Wsometimes-uninitized warning KVM: x86: expose AVX512_BF16 feature to guest KVM: selftests: enable pgste option for the linker on s390 KVM: selftests: Move kvm_create_max_vcpus test to generic code ...
2019-07-20smp: Warn on function calls from softirq contextPeter Zijlstra1-0/+16
It's clearly documented that smp function calls cannot be invoked from softirq handling context. Unfortunately nothing enforces that or emits a warning. A single function call can be invoked from softirq context only via smp_call_function_single_async(). The only legit context is task context, so add a warning to that effect. Reported-by: luferry <luferry@163.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190718160601.GP3402@hirez.programming.kicks-ass.net
2019-07-20KVM: LAPIC: Inject timer interrupt via posted interruptWanpeng Li1-0/+6
Dedicated instances are currently disturbed by unnecessary jitter due to the emulated lapic timers firing on the same pCPUs where the vCPUs reside. There is no hardware virtual timer on Intel for guest like ARM, so both programming timer in guest and the emulated timer fires incur vmexits. This patch tries to avoid vmexit when the emulated timer fires, at least in dedicated instance scenario when nohz_full is enabled. In that case, the emulated timers can be offload to the nearest busy housekeeping cpus since APICv has been found for several years in server processors. The guest timer interrupt can then be injected via posted interrupts, which are delivered by the housekeeping cpu once the emulated timer fires. The host should tuned so that vCPUs are placed on isolated physical processors, and with several pCPUs surplus for busy housekeeping. If disabled mwait/hlt/pause vmexits keep the vCPUs in non-root mode, ~3% redis performance benefit can be observed on Skylake server, and the number of external interrupt vmexits drops substantially. Without patch VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 42916 49.43% 39.30% 0.47us 106.09us 0.71us ( +- 1.09% ) While with patch: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 6871 9.29% 2.96% 0.44us 57.88us 0.72us ( +- 4.02% ) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-19Merge branch 'linus' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix missed wake-up race in padata - Use crypto_memneq in ccp - Fix version check in ccp - Fix fuzz test failure in ccp - Fix potential double free in crypto4xx - Fix compile warning in stm32 * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: padata: use smp_mb in padata_reorder to avoid orphaned padata jobs crypto: ccp - Fix SEV_VERSION_GREATER_OR_EQUAL crypto: ccp/gcm - use const time tag comparison. crypto: ccp - memset structure fields to zero before reuse crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe crypto: stm32/hash - Fix incorrect printk modifier for size_t
2019-07-19Merge tag 'trace-v5.3-2' of ↵Linus Torvalds1-8/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Eiichi Tsukata found a small bug from the fixup of the stack code Removing ULONG_MAX as the marker for the user stack trace end, made the tracing code not know where the end is. The end is now marked with a zero (NULL) pointer. Eiichi fixed this in the tracing code" * tag 'trace-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix user stack trace "??" output
2019-07-19Merge branch 'work.misc' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: perf_event_get(): don't bother with fget_raw() vfs: update d_make_root() description
2019-07-19Merge branch 'work.mount0' of ↵Linus Torvalds2-62/+49
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-08 07:58:42 +0000