summaryrefslogtreecommitdiffstats
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2011-02-19genirq: Move IRQ_AFFINITY_SET to coreThomas Gleixner4-4/+24
Keep status in sync until last abuser is gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Reuse existing can set affinty checkThomas Gleixner2-4/+3
Add a !desc check while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.stateThomas Gleixner6-14/+69
That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move debug code to separate headerThomas Gleixner2-44/+44
It'll break when I'm going to undefine the constants. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove CHECK_IRQ_PER_CPU from core codeThomas Gleixner2-3/+3
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove CONFIG_IRQ_PER_CPUThomas Gleixner3-11/+3
The saving of this switch is minimal versus the ifdef mess it creates. Simple enable PER_CPU unconditionally and remove the config switch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_MOVE_PENDING to irq_data.stateThomas Gleixner6-6/+34
chip implementations need to know about it. Keep status in sync until all users are fixed. Accessor function: irqd_is_setaffinity_pending(irqdata) Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_WAKEUP to coreThomas Gleixner4-3/+7
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_SUSPENDED to coreThomas Gleixner3-7/+9
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_MASKED to coreThomas Gleixner6-12/+40
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_PENDING flag to coreThomas Gleixner10-16/+39
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_DISABLED to coreThomas Gleixner8-23/+55
Keep status in sync until all abusers are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_REPLAY and IRQ_WAITING to coreThomas Gleixner6-17/+26
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_ONESHOT to coreThomas Gleixner3-5/+7
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_INPROGRESS to coreThomas Gleixner8-21/+52
We need to maintain the flag for now in both fields status and istate. Add a CONFIG_GENERIC_HARDIRQS_NO_COMPAT switch to allow testing w/o the status one. Wrap the access to status IRQ_INPROGRESS in a inline which can be turned of with CONFIG_GENERIC_HARDIRQS_NO_COMPAT along with the define. There is no reason that anything outside of core looks at this. That needs some modifications, but we'll get there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_POLL_INPROGRESS to coreThomas Gleixner3-4/+6
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use modify_status for set_irq_nested_threadThomas Gleixner1-28/+0
No need for a separate function in the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_SPURIOUS_DISABLED to core stateThomas Gleixner3-9/+11
No users outside. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_AUTODETECT to internal stateThomas Gleixner3-20/+27
No users outside of core Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Protect tglx from tripping over his own feetThomas Gleixner3-2/+11
The irq_desc.status field will either go away or renamed to settings. Anyway we need to maintain compatibility to avoid breaking the world and some more. While moving bits into the core, I need to avoid that I use any of the still existing IRQ_ bits in the core code by typos. So that file will hold the inline wrappers and some nasty CPP tricks to break the build when typoed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add internal state field to irq_descThomas Gleixner1-0/+6
That field will contain internal state information which is not going to be exposed to anything outside the core code - except via accessor functions. I'm tired of everyone fiddling in irq_desc.status. core_internal_state__do_not_mess_with_it is clear enough, annoying to type and easy to grep for. Offenders will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Fixup core code namespace falloutThomas Gleixner2-4/+4
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Implement generic irq_show_interrupts()Thomas Gleixner2-0/+66
All archs implement show_interrupts() in more or less the same way. That's tons of duplicated code with different bugs with no value. Implement a generic version and deprecate show_interrupts() Unfortunately we need some ifdeffery for !GENERIC_HARDIRQ archs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Simplify handle_irq_event()Thomas Gleixner1-13/+6
Now that all core users are converted one layer can go. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_irq_event() in the spurious poll codeThomas Gleixner1-12/+9
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_perpcu_event() in handle_percpu_irq()Thomas Gleixner1-8/+6
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_irq_event() in handle_edge_irq()Thomas Gleixner1-14/+2
It's safe to drop the IRQ_INPROGRESS flag between action chain walks as we are protected by desc->lock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_irq_event() in handle_fasteoi_irq()Thomas Gleixner1-17/+2
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_irq_event() in handle_level_irq()Thomas Gleixner1-14/+2
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_irq_event() in handle_simple_irq()Thomas Gleixner1-13/+2
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Implement handle_irq_event()Thomas Gleixner2-8/+42
Core code replacement for the ugly camel case. It contains all the code which is shared in all handlers. clear status flags set INPROGRESS flag unlock call action chain note_interrupt lock clr INPROGRESS flag Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Do not fiddle with IRQ_MASKED in handle_edge_irq()Thomas Gleixner1-1/+1
IRQ_MASKED is set in mask_ack_irq() anyway. Remove it from handle_edge_irq() to allow simpler ab^HHreuse of that function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110202212551.918484270@linutronix.de>
2011-02-19genirq: Consolidate IRQ_DISABLEDThomas Gleixner4-16/+14
Handle IRQ_DISABLED consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove default magicThomas Gleixner2-60/+17
Now that everything uses the wrappers, we can remove the default functions. None of those functions is performance critical. That makes the IRQ_MASKED flag tracking fully consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Consolidate disable/enableThomas Gleixner5-8/+20
Create irq_disable/enable and use them to keep the flags consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Consolidate startup/shutdown of interruptsThomas Gleixner4-31/+33
Aside of duplicated code some of the startup/shutdown sites do not handle the MASKED/DISABLED flags and the depth field at all. Move that to a helper function and take care of it there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110202212551.787481468@linutronix.de>
2011-02-19genirq: Remove bogus conditionalThomas Gleixner1-4/+1
The if (chip->irq_shutdown) check will always evaluate to true, as we fill in chip->irq_shutdown with default_shutdown in irq_chip_set_defaults() if the chip does not provide its own function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110202212551.667607458@linutronix.de>
2011-02-19genirq: Move irq thread flags to coreThomas Gleixner1-0/+14
Soleley used in core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mark polled irqs and defer the real handlerThomas Gleixner3-28/+60
With the chip.end() function gone we might run into a situation where a poll call runs and the real interrupt comes in, sees IRQ_INPROGRESS and disables the line. That might be a perfect working one, which will then be masked forever. So mark them polled while the poll runs. When the real handler sees IRQ_INPROGRESS it checks the poll flag and waits for the polling to complete. Add the necessary amount of sanity checks to it to avoid deadlocks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: spurious: Run only one poller at a timeThomas Gleixner1-1/+15
No point in running concurrent pollers which confuse each other by setting PENDING. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Do not poll disabled, percpu and timer interruptsThomas Gleixner1-14/+26
There is no point in polling disabled lines. percpu does not make sense at all because we only poll on the cpu we're currently running on. Also polling per_cpu interrupts is racy as hell. The handler runs without locking so we might get a huge surprise. If the timer interrupt needs polling, then we wont get there anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Fixup poll handlingThomas Gleixner1-31/+19
try_one_irq() contains redundant code and lots of useless checks for shared interrupts. Check for shared before setting IRQ_INPROGRESS and then call handle_IRQ_event() while pending. Shorter version with the same functionality. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Warn when handler enables interruptsThomas Gleixner1-1/+3
We run all handlers with interrupts disabled and expect them not to enable them. Warn when we catch one who does. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Plug race in report_bad_irq()Thomas Gleixner1-3/+9
We cannot walk the action chain unlocked. Even if IRQ_INPROGRESS is set an action can be removed and we follow a null pointer. It's safe to take the lock there, because the code which removes the action will call synchronize_irq() which waits unlocked for IRQ_INPROGRESS going away. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove redundant thread affinity settingThomas Gleixner1-2/+0
Thread affinity is already set by setup_affinity(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Do not copy affinity before setThomas Gleixner3-15/+36
While rumaging through arch code I found that there are a few workarounds which deal with the fact that the initial affinity setting from request_irq() copies the mask into irq_data->affinity before the chip code is called. In the normal path we unconditionally copy the mask when the chip code returns 0. Copy after the code is called and add a return code IRQ_SET_MASK_OK_NOCOPY for the chip functions, which prevents the copy. That way we see the real mask when the chip function decided to truncate it further as some arches do. IRQ_SET_MASK_OK is 0, which is the current behaviour. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Always apply cpu online maskThomas Gleixner1-6/+6
If the affinity had been set by the user, then a later request_irq() will honour that setting. But online cpus can have changed. So apply the online mask and for this case as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Rremove redundant checkThomas Gleixner1-1/+2
IRQ_NO_BALANCING is already checked in irq_can_set_affinity() above, no need to check it again. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Simplify affinity related codeThomas Gleixner1-23/+41
There is lot of #ifdef CONFIG_GENERIC_PENDING_IRQ along with duplicated code in the irq core. Move the #ifdeffery into one place and cleanup the code so it's readable. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Namespace cleanupThomas Gleixner2-17/+17
The irq namespace has become quite convoluted. My bad. Clean it up and deprecate the old functions. All new functions follow the scheme: irq number based: irq_set/get/xxx/_xxx(unsigned int irq, ...) irq_data based: irq_data_set/get/xxx/_xxx(struct irq_data *d, ....) irq_desc based: irq_desc_get_xxx(struct irq_desc *desc) Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-02 03:41:30 +0000