summaryrefslogtreecommitdiffstats
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2009-04-14x86, irq: Remove IRQ_DISABLED check in process context IRQ movePallipadi, Venkatesh1-3/+2
As discussed in the thread here: http://marc.info/?l=linux-kernel&m=123964468521142&w=2 Eric W. Biederman observed: > It looks like some additional bugs have slipped in since last I looked. > > set_irq_affinity does this: > ifdef CONFIG_GENERIC_PENDING_IRQ > if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) { > cpumask_copy(desc->affinity, cpumask); > desc->chip->set_affinity(irq, cpumask); > } else { > desc->status |= IRQ_MOVE_PENDING; > cpumask_copy(desc->pending_mask, cpumask); > } > #else > > That IRQ_DISABLED case is a software state and as such it has nothing to > do with how safe it is to move an irq in process context. [...] > > The only reason we migrate MSIs in interrupt context today is that there > wasn't infrastructure for support migration both in interrupt context > and outside of it. Yes. The idea here was to force the MSI migration to happen in process context. One of the patches in the series did disable_irq(dev->irq); irq_set_affinity(dev->irq, cpumask_of(dev->cpu)); enable_irq(dev->irq); with the above patch adding irq/manage code check for interrupt disabled and moving the interrupt in process context. IIRC, there was no IRQ_MOVE_PCNTXT when we were developing this HPET code and we ended up having this ugly hack. IRQ_MOVE_PCNTXT was there when we eventually submitted the patch upstream. But, looks like I did a blind rebasing instead of using IRQ_MOVE_PCNTXT in hpet MSI code. Below patch fixes this. i.e., revert commit 932775a4ab622e3c99bd59f14cc and add PCNTXT to HPET MSI setup. Also removes copying of desc->affinity in generic code as set_affinity routines are doing it internally. Reported-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Li Shaohua" <shaohua.li@intel.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: "lcm@us.ibm.com" <lcm@us.ibm.com> Cc: suresh.b.siddha@intel.com LKML-Reference: <20090413222058.GB8211@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-13kernel/sys.c: clean up sys_shutdown exit pathAndi Kleen1-15/+9
Impact: cleanup, fix Clean up sys_shutdown() exit path. Factor out common code. Return correct error code instead of always 0 on failure. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13ptrace: fix exit_ptrace() vs ptrace_traceme() raceOleg Nesterov1-3/+4
Pointed out by Roland. The bug was recently introduced by me in "forget_original_parent: split out the un-ptrace part", commit 39c626ae47c469abdfd30c6e42eff884931380d6. Since that patch we have a window after exit_ptrace() drops tasklist and before forget_original_parent() takes it again. In this window the child can do ptrace(PTRACE_TRACEME) and nobody can untrace this child after that. Change ptrace_traceme() to not attach to the exiting ->real_parent. We don't report the error in this case, we pretend we attach right before ->real_parent calls exit_ptrace() which should untrace us anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13mm: move the scan_unevictable_pages sysctl to the vm tablePeter Zijlstra1-10/+10
vm knobs should go in the vm table. Probably too late for randomize_va_space though. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13PM/Hibernate: Wait for SCSI devices scan to complete during resumeRafael J. Wysocki2-0/+17
There is a race between resume from hibernation and the asynchronous scanning of SCSI devices and to prevent it from happening we need to call scsi_complete_async_scans() during resume from hibernation. In addition, if the resume from hibernation is userland-driven, it's better to wait for all device probes in the kernel to complete before attempting to open the resume device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds5-27/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing/filters: return proper error code when writing filter file tracing/filters: allow user input integer to be oct or hex tracing/filters: fix NULL pointer dereference tracing/filters: NIL-terminate user input filter ftrace: Output REC->var instead of __entry->var for trace format Make __stringify support variable argument macros too tracing: fix document references tracing: fix splice return too large tracing: update file->f_pos when splice(2) it tracing: allocate page when needed tracing: disable seeking for trace_pipe_raw
2009-04-13Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: continue lock debugging despite some taints lockdep: warn about lockdep disabling after kernel taint
2009-04-13Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: percpu: unbreak alpha percpu mutex: have non-spinning mutexes on s390 by default
2009-04-12lockdep: continue lock debugging despite some taintsFrederic Weisbecker1-1/+3
Impact: broaden lockdep checks Lockdep is disabled after any kernel taints. This might be convenient to ignore bad locking issues which sources come from outside the kernel tree. Nevertheless, it might be a frustrating experience for the staging developers or those who experience a warning but are focused on another things that require lockdep. The v2 of this patch simply don't disable anymore lockdep in case of TAINT_CRAP and TAINT_WARN events. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: LTP <ltp-list@lists.sourceforge.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg KH <gregkh@suse.de> LKML-Reference: <1239412638-6739-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12lockdep: warn about lockdep disabling after kernel taintFrederic Weisbecker1-2/+8
Impact: provide useful missing info for developers Kernel taint can occur in several situations such as warnings, load of prorietary or staging modules, bad page, etc... But when such taint happens, a developer might still be working on the kernel, expecting that lockdep is still enabled. But a taint disables lockdep without ever warning about it. Such a kernel behaviour doesn't really help for kernel development. This patch adds this missing warning. Since the taint is done most of the time after the main message that explain the real source issue, it seems safe to warn about it inside add_taint() so that it appears at last, without hurting the main information. v2: Use a generic helper to disable lockdep instead of an open coded xchg(). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1239412638-6739-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12tracing/filters: return proper error code when writing filter fileLi Zefan2-6/+8
- propagate return value of filter_add_pred() to the user - return -ENOSPC but not -ENOMEM or -EINVAL when the filter array is full Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49E04CF0.3010105@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12tracing/filters: allow user input integer to be oct or hexLi Zefan1-2/+3
Before patch: # echo 'parent_pid == 0x10' > events/sched/sched_process_fork/filter # cat sched/sched_process_fork/filter parent_pid == 0 After patch: # cat sched/sched_process_fork/filter parent_pid == 16 Also check the input more strictly. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49E04C53.4010600@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12tracing/filters: fix NULL pointer dereferenceLi Zefan1-0/+5
Try this, and you'll see NULL pointer dereference bug: # echo -n 'parent_comm ==' > sched/sched_process_fork/filter Because we passed NULL ptr to simple_strtoull(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49E04C43.1050504@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12tracing/filters: NIL-terminate user input filterLi Zefan1-0/+2
Make sure messages from user space are NIL-terminated strings, otherwise we could dump random memory while reading filter file. Try this: # echo 'parent_comm ==' > events/sched/sched_process_fork/filter # cat events/sched/sched_process_fork/filter parent_comm == � Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49E04C32.6060508@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-11async: Fix module loading async-work regressionLinus Torvalds1-0/+3
Several drivers use asynchronous work to do device discovery, and we synchronize with them in the compiled-in case before we actually try to mount root filesystems etc. However, when compiled as modules, that synchronization is missing - the module loading completes, but the driver hasn't actually finished probing for devices, and that means that any user mode that expects to use the devices after the 'insmod' is now potentially broken. We already saw one case of a similar issue in the ACPI battery code, where the kernel itself expected the module to be all done, and unmapped the init memory - but the async device discovery was still running. That got hacked around by just removing the "__init" (see commit 5d38258ec026921a7b266f4047ebeaa75db358e5 "ACPI battery: fix async boot oops"), but the real fix is to just make the module loading wait for all async work to be completed. It will slow down module loading, but since common devices should be built in anyway, and since the bug is really annoying and hard to handle from user space (and caused several S3 resume regressions), the simple fix to wait is the right one. This fixes at least http://bugzilla.kernel.org/show_bug.cgi?id=13063 but probably a few other bugzilla entries too (12936, for example), and is confirmed to fix Rafael's storage driver breakage after resume bug report (no bugzilla entry). We should also be able to now revert that ACPI battery fix. Reported-and-tested-by: Rafael J. Wysocki <rjw@suse.com> Tested-by: Heinz Diehl <htd@fancy-poultry.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-10ftrace: Output REC->var instead of __entry->var for trace formatZhaolei1-2/+2
print fmt: "irq=%d return=%s", __entry->irq, __entry->ret ? \"handled\" : \"unhandled\" "__entry" should be convert to "REC" by __stringify() macro. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <49DC679D.2090901@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10tracing: fix document referencesLi Zefan1-2/+2
When moving documents to Documentation/trace/, I forgot to grep Kconfig to find out those references. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Pekka Paalanen <pq@iki.fi> Cc: eduard.munteanu@linux360.ro LKML-Reference: <49DE97EF.7080208@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10tracing: fix splice return too largeLai Jiangshan1-2/+14
I got these from strace: splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 12288 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 12288 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 12288 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 16384 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 8192 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 8192 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 8192 I wanted to splice_read 4096 bytes, but it returns 8192 or larger. It is because the return value of tracing_buffers_splice_read() does not include "zero out any left over data" bytes. But tracing_buffers_read() includes these bytes, we make them consistent. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> LKML-Reference: <49D46674.9030804@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10tracing: update file->f_pos when splice(2) itLai Jiangshan1-7/+1
Impact: Cleanup These two lines: if (unlikely(*ppos)) return -ESPIPE; in tracing_buffers_splice_read() are not needed, VFS layer has disabled seek(2). We remove these two lines, and then we can update file->f_pos. And tracing_buffers_read() updates file->f_pos, this fix make tracing_buffers_splice_read() updates file->f_pos too. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> LKML-Reference: <49D46670.4010503@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10tracing: allocate page when neededLai Jiangshan1-8/+8
Impact: Cleanup Sometimes, we open trace_pipe_raw, but we don't read(2) it, we just splice(2) it, thus, the page is not used. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> LKML-Reference: <49D4666B.4010608@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10tracing: disable seeking for trace_pipe_rawLai Jiangshan1-1/+1
Impact: disable pread() We set tracing_buffers_fops.llseek to no_llseek, but we can still perform pread() to read this file. That is not expected. This fix uses nonseekable_open() to disable it. tracing_buffers_fops.llseek is still set to no_llseek, it mark this file is a "non-seekable device" and is used by sys_splice(). See also do_splice() or manual of splice(2): ERRORS EINVAL Target file system doesn't support splicing; neither of the descriptors refers to a pipe; or offset given for non-seekable device. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> LKML-Reference: <49D46668.8030806@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: consolidate documents blktrace: pass the right pointer to kfree() tracing/syscalls: use a dedicated file header tracing: append a comma to INIT_FTRACE_GRAPH
2009-04-09Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds4-31/+156
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: do not count frozen tasks toward load sched: refresh MAINTAINERS entry sched: Print sched_group::__cpu_power in sched_domain_debug cpuacct: add per-cgroup utime/stime statistics posixtimers, sched: Fix posix clock monotonicity sched_rt: don't allocate cpumask in fastpath cpuacct: make cpuacct hierarchy walk in cpuacct_charge() safe when rcupreempt is used -v2
2009-04-09Merge branches 'core-fixes-for-linus', 'irq-fixes-for-linus' and ↵Linus Torvalds5-8/+22
'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: printk: fix wrong format string iter for printk futex: comment requeue key reference semantics * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: fix cpumask memory leak on offstack cpumask kernels * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix-timers: fix RLIMIT_CPU && setitimer(CPUCLOCK_PROF) posix-timers: fix RLIMIT_CPU && fork() timers: add missing kernel-doc
2009-04-09mutex: have non-spinning mutexes on s390 by defaultHeiko Carstens1-1/+2
Impact: performance regression fix for s390 The adaptive spinning mutexes will not always do what one would expect on virtualized architectures like s390. Especially the cpu_relax() loop in mutex_spin_on_owner might hurt if the mutex holding cpu has been scheduled away by the hypervisor. We would end up in a cpu_relax() loop when there is no chance that the state of the mutex changes until the target cpu has been scheduled again by the hypervisor. For that reason we should change the default behaviour to no-spin on s390. We do have an instruction which allows to yield the current cpu in favour of a different target cpu. Also we have an instruction which allows us to figure out if the target cpu is physically backed. However we need to do some performance tests until we can come up with a solution that will do the right thing on s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> LKML-Reference: <20090409184834.7a0df7b2@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09blktrace: pass the right pointer to kfree()Li Zefan1-5/+5
Impact: fix kfree crash with non-standard act_mask string If passing a string with leading white spaces to strstrip(), the returned ptr != the original ptr. This bug was introduced by me. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <49DD694C.8020902@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09tracing/syscalls: use a dedicated file headerFrederic Weisbecker1-1/+1
Impact: fix build warnings and possibe compat misbehavior on IA64 Building a kernel on ia64 might trigger these ugly build warnings: CC arch/ia64/ia32/sys_ia32.o In file included from arch/ia64/ia32/sys_ia32.c:55: arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined In file included from include/linux/elf.h:7, from include/linux/module.h:14, from include/linux/ftrace.h:8, from include/linux/syscalls.h:68, from arch/ia64/ia32/sys_ia32.c:18: arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition [...] sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h to import the syscalls tracing prototypes. But including ftrace.h can pull too much things for a low level file, especially on ia64 where the ia32 private headers conflict with higher level headers. Now we isolate the syscall tracing headers in their own lightweight file. Reported-by: Tony Luck <tony.luck@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jason Baron <jbaron@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Michael Davidson <md@google.com> LKML-Reference: <20090408184058.GB6017@nowhere> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09work_on_cpu(): rewrite it to create a kernel thread on demandAndrew Morton1-17/+19
Impact: circular locking bugfix The various implemetnations and proposed implemetnations of work_on_cpu() are vulnerable to various deadlocks because they all used queues of some form. Unrelated pieces of kernel code thus gained dependencies wherein if one work_on_cpu() caller holds a lock which some other work_on_cpu() callback also takes, the kernel could rarely deadlock. Fix this by creating a short-lived kernel thread for each work_on_cpu() invokation. This is not terribly fast, but the only current caller of work_on_cpu() is pci_call_probe(). It would be nice to find some other way of doing the node-local allocations in the PCI probe code so that we can zap work_on_cpu() altogether. The code there is rather nasty. I can't think of anything simple at this time... Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-04-09kthread: move sched-realeted initialization from kthreadd contextOleg Nesterov1-11/+11
kthreadd is the single thread which implements ths "create" request, move sched_setscheduler/etc from create_kthread() to kthread_create() to improve the scalability. We should be careful with sched_setscheduler(), use _nochek helper. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Vitaliy Gusev <vgusev@openvz.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-04-09kthread: Don't looking for a task in create_kthread() #2Vitaliy Gusev1-3/+1
Remove the unnecessary find_task_by_pid_ns(). kthread() can just use "current" to get the same result. Signed-off-by: Vitaliy Gusev <vgusev@openvz.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-04-08ptrace: some checkpatch fixesRoland McGrath1-9/+7
This fixes all the checkpatch --file complaints about kernel/ptrace.c and also removes an unused #include. I've verified that there are no changes to the compiled code on x86_64. Signed-off-by: Roland McGrath <roland@redhat.com> [ Removed the parts that just split a line - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-08posix-timers: fix RLIMIT_CPU && setitimer(CPUCLOCK_PROF)Oleg Nesterov1-1/+1
update_rlimit_cpu() tries to optimize out set_process_cpu_timer() in case when we already have CPUCLOCK_PROF timer which should expire first. But it uses cputime_lt() instead of cputime_gt(). Test case: int main(void) { struct itimerval it = { .it_value = { .tv_sec = 1000 }, }; assert(!setitimer(ITIMER_PROF, &it, NULL)); struct rlimit rl = { .rlim_cur = 1, .rlim_max = 1, }; assert(!setrlimit(RLIMIT_CPU, &rl)); for (;;) ; return 0; } Without this patch, the task is not killed as RLIMIT_CPU demands. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Peter Lojkin <ia6432@inbox.ru> Cc: Roland McGrath <roland@redhat.com> Cc: stable@kernel.org LKML-Reference: <20090327000610.GA10108@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08posix-timers: fix RLIMIT_CPU && fork()Oleg Nesterov1-4/+9
See http://bugzilla.kernel.org/show_bug.cgi?id=12911 copy_signal() copies signal->rlim, but RLIMIT_CPU is "lost". Because posix_cpu_timers_init_group() sets cputime_expires.prof_exp = 0 and thus fastpath_timer_check() returns false unless we have other expired cpu timers. Change copy_signal() to set cputime_expires.prof_exp if we have RLIMIT_CPU. Also, set cputimer.running = 1 in that case. This is not strictly necessary, but imho makes sense. Reported-by: Peter Lojkin <ia6432@inbox.ru> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Peter Lojkin <ia6432@inbox.ru> Cc: Roland McGrath <roland@redhat.com> Cc: stable@kernel.org LKML-Reference: <20090327000607.GA10104@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08Merge commit 'v2.6.30-rc1' into sched/urgentIngo Molnar132-5074/+17625
Merge reason: update to latest upstream to queue up fix Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08Merge commit 'v2.6.30-rc1' into core/urgentIngo Molnar90-3724/+14459
Merge reason: need latest upstream to queue up dependent fix Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07Merge branch 'core/softlockup' of ↵Linus Torvalds5-106/+235
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core/softlockup' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: softlockup: make DETECT_HUNG_TASK default depend on DETECT_SOFTLOCKUP softlockup: move 'one' to the softlockup section in sysctl.c softlockup: ensure the task has been switched out once softlockup: remove timestamp checking from hung_task softlockup: convert read_lock in hung_task to rcu_read_lock softlockup: check all tasks in hung_task softlockup: remove unused definition for spawn_softlockup_task softlockup: fix potential race in hung_task when resetting timeout softlockup: fix to allow compiling with !DETECT_HUNG_TASK softlockup: decouple hung tasks check from softlockup detection
2009-04-07Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds7-12/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y branch tracer: Fix for enabling branch profiling makes sparse unusable ftrace: Correct a text align for event format output Update /debug/tracing/README tracing/ftrace: alloc the started cpumask for the trace file tracing, x86: remove duplicated #include ftrace: Add check of sched_stopped for probe_sched_wakeup function-graph: add proper initialization for init task tracing/ftrace: fix missing include string.h tracing: fix incorrect return type of ns2usecs() tracing: remove CALLER_ADDR2 from wakeup tracer blktrace: fix pdu_len when tracing packet command requests blktrace: small cleanup in blk_msg_write() blktrace: NUL-terminate user space messages tracing: move scripts/trace/power.pl to scripts/tracing/power.pl
2009-04-07Merge branch 'irq/threaded' of ↵Linus Torvalds4-20/+237
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq/threaded' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: fix devres.o build for GENERIC_HARDIRQS=n genirq: provide old request_irq() for CONFIG_GENERIC_HARDIRQ=n genirq: threaded irq handlers review fixups genirq: add support for threaded interrupts to devres genirq: add threaded interrupt handler support
2009-04-07kprobes: support per-kprobe disablingMasami Hiramatsu1-26/+141
Add disable_kprobe() and enable_kprobe() to disable/enable kprobes temporarily. disable_kprobe() asynchronously disables probe handlers of specified kprobe. So, after calling it, some handlers can be called at a while. enable_kprobe() enables specified kprobe. aggr_pre_handler and aggr_post_handler check disabled probes. On the other hand aggr_break_handler and aggr_fault_handler don't check it because these handlers will be called while executing pre or post handlers and usually those help error handling. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07kprobes: rename kprobe_enabled to kprobes_all_disarmedMasami Hiramatsu1-17/+17
Rename kprobe_enabled to kprobes_all_disarmed and invert logic due to avoiding naming confusion from per-probe disabling. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07kprobes: move EXPORT_SYMBOL_GPL just after function definitionsMasami Hiramatsu1-12/+18
Clean up positions of EXPORT_SYMBOL_GPL in kernel/kprobes.c according to checkpatch.pl. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07kprobes: cleanup aggr_kprobe related codeMasami Hiramatsu1-30/+30
Currently, kprobes can disable all probes at once, but can't disable it individually (not unregister, just disable an kprobe, because unregistering needs to wait for scheduler synchronization). These patches introduce APIs for on-the-fly per-probe disabling and re-enabling by dis-arming/re-arming its breakpoint instruction. This patch: Change old_p to ap in add_new_kprobe() for readability, copy flags member in add_aggr_kprobe(), and simplify the code flow of register_aggr_kprobe(). Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07mm: add /proc controls for pdflush threadsPeter W Morreale1-0/+23
Add /proc entries to give the admin the ability to control the minimum and maximum number of pdflush threads. This allows finer control of pdflush on both large and small machines. The rationale is simply one size does not fit all. Admins on large and/or small systems may want to tune the min/max pdflush thread count to best suit their needs. Right now the min/max is hardcoded to 2/8. While probably a fair estimate for smaller machines, large machines with large numbers of CPUs and large numbers of filesystems/block devices may benefit from larger numbers of threads working on different block devices. Even if the background flushing algorithm is radically changed, it is still likely that multiple threads will be involved and admins would still desire finer control on the min/max other than to have to recompile the kernel. The patch adds '/proc/sys/vm/nr_pdflush_threads_min' and '/proc/sys/vm/nr_pdflush_threads_max' with r/w permissions. The minimum value for nr_pdflush_threads_min is 1 and the maximum value is the current value of nr_pdflush_threads_max. This minimum is required since additional thread creation is performed in a pdflush thread itself. The minimum value for nr_pdflush_threads_max is the current value of nr_pdflush_threads_min and the maximum value can be 1000. Documentation/sysctl/vm.txt is also updated. [akpm@linux-foundation.org: fix comment, fix whitespace, use __read_mostly] Signed-off-by: Peter W Morreale <pmorreale@novell.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07ftrace: Correct a text align for event format outputZhaolei1-1/+1
If we cat debugfs/tracing/events/ftrace/bprint/format, we'll see: name: bprint ID: 6 format: field:unsigned char common_type; offset:0; size:1; field:unsigned char common_flags; offset:1; size:1; field:unsigned char common_preempt_count; offset:2; size:1; field:int common_pid; offset:4; size:4; field:int common_tgid; offset:8; size:4; field:unsigned long ip; offset:12; size:4; field:char * fmt; offset:16; size:4; field: char buf; offset:20; size:0; print fmt: "%08lx (%d) fmt:%p %s" There is an inconsistent blank before char buf. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> LKML-Reference: <49D5E3EE.70201@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07Update /debug/tracing/READMENikanth Karthikesan1-2/+2
Some of the tracers have been renamed, which was not updated in the in-kernel run-time README file. Update it. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> LKML-Reference: <200903231158.32151.knikanth@suse.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07tracing/ftrace: alloc the started cpumask for the trace fileFrederic Weisbecker1-1/+12
Impact: fix a crash while cat trace file Currently we are using a cpumask to remind each cpu where a trace occured. It lets us notice the user that a cpu just had its first trace. But on latest -tip we have the following crash once we cat the trace file: IP: [<c0270c4a>] print_trace_fmt+0x45/0xe7 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/class/net/eth0/carrier Pid: 3897, comm: cat Not tainted (2.6.29-tip-02825-g0f22972-dirty #81) EIP: 0060:[<c0270c4a>] EFLAGS: 00010297 CPU: 0 EIP is at print_trace_fmt+0x45/0xe7 EAX: 00000000 EBX: 00000000 ECX: c12d9e98 EDX: ccdb7010 ESI: d31f4000 EDI: 00322401 EBP: d31f3f10 ESP: d31f3efc DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process cat (pid: 3897, ti=d31f2000 task=d3b3cf20 task.ti=d31f2000) Stack: d31f4080 ccdb7010 d31f4000 d691fe70 ccdb7010 d31f3f24 c0270e5c d31f4000 d691fe70 d31f4000 d31f3f34 c02718e8 c12d9e98 d691fe70 d31f3f70 c02bfc33 00001000 09130000 d3b46e00 d691fe98 00000000 00000079 00000001 00000000 Call Trace: [<c0270e5c>] ? print_trace_line+0x170/0x17c [<c02718e8>] ? s_show+0xa7/0xbd [<c02bfc33>] ? seq_read+0x24a/0x327 [<c02bf9e9>] ? seq_read+0x0/0x327 [<c02ab18b>] ? vfs_read+0x86/0xe1 [<c02ab289>] ? sys_read+0x40/0x65 [<c0202d8f>] ? sysenter_do_call+0x12/0x3c Code: 00 00 00 89 45 ec f7 c7 00 20 00 00 89 55 f0 74 4e f6 86 98 10 00 00 02 74 45 8b 86 8c 10 00 00 8b 9e a8 10 00 00 e8 52 f3 ff ff <0f> a3 03 19 c0 85 c0 75 2b 8b 86 8c 10 00 00 8b 9e a8 10 00 00 EIP: [<c0270c4a>] print_trace_fmt+0x45/0xe7 SS:ESP 0068:d31f3efc CR2: 0000000000000000 ---[ end trace aa9cf38e5ebed9dd ]--- This is because we alloc the iter->started cpumask on tracing_pipe_open but not on tracing_open. It hadn't been noticed until now because we need to have ring buffer overruns to activate the starting of cpu buffer detection. Also, we need a check to not print the messagge for the first trace on the file. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1238619188-6109-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07ftrace: Add check of sched_stopped for probe_sched_wakeupZhaolei1-0/+3
The wakeup tracing in sched_switch does not stop when a user disables tracing. This is because the probe_sched_wakeup() is missing the check to prevent the wakeup from being traced. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> LKML-Reference: <49D1C543.3010307@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07tracing/ftrace: fix missing include string.hFrederic Weisbecker1-0/+1
Building a kernel with tracing can raise the following warning on tip/master: kernel/trace/trace.c:1249: error: implicit declaration of function 'vbin_printf' We are missing an include to string.h Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1238160130-7437-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07tracing: fix incorrect return type of ns2usecs()Lai Jiangshan3-4/+3
Impact: fix time output bug in 32bits system ns2usecs() returns 'long', it's incorrect. (In i386) ... <idle>-0 [000] 521.442100: _spin_lock <-tick_do_update_jiffies64 <idle>-0 [000] 521.442101: do_timer <-tick_do_update_jiffies64 <idle>-0 [000] 521.442102: update_wall_time <-do_timer <idle>-0 [000] 521.442102: update_xtime_cache <-update_wall_time .... (It always print the time less than 2200 seconds besides ...) Because 'long' is 32bits in i386. ( (1<<31) useconds is about 2200 seconds) ... <idle>-0 [001] 4154502640.134759: rcu_bh_qsctr_inc <-__do_softirq <idle>-0 [001] 4154502640.134760: _local_bh_enable <-__do_softirq <idle>-0 [001] 4154502640.134761: idle_cpu <-irq_exit ... (very large value) Because 'long' is a signed type and it is 32bits in i386. Changes in v2: return 'unsigned long long' instead of 'cycle_t' Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49D05D10.4030009@cn.fujitsu.com> Reported-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07tracing: remove CALLER_ADDR2 from wakeup tracerSteven Rostedt1-1/+7
Maneesh Soni was getting a crash when running the wakeup tracer. We debugged it down to the recording of the function with the CALLER_ADDR2 macro. This is used to get the location of the caller to schedule. But the problem comes when schedule is called by assmebly. In the case that Maneesh had, retint_careful would call schedule. But retint_careful does not set up a proper frame pointer. CALLER_ADDR2 is defined as __builtin_return_address(2). This produces the following assembly in the wakeup tracer code. mov 0x0(%rbp),%rcx <--- get the frame pointer of the caller mov %r14d,%r8d mov 0xf2de8e(%rip),%rdi mov 0x8(%rcx),%rsi <-- this is __builtin_return_address(1) mov 0x28(%rdi,%rax,8),%rbx mov (%rcx),%rax <-- get the frame pointer of the caller's caller mov %r12,%rcx mov 0x8(%rax),%rdx <-- this is __builtin_return_address(2) At the reading of 0x8(%rax) Maneesh's machine would take a fault. The reason is that retint_careful did not set up the return address and the content of %rax here was zero. To verify this, I sent Maneesh a patch to create a frame pointer in retint_careful. He ran the test again but this time he would take the same type of fault from sysret_careful. The retint_careful was no longer an issue, but there are other callers that still have issues. Instead of adding frame pointers for all callers to schedule (in possibly all archs), it is much safer to simply not use CALLER_ADDR2. This loses out on knowing what called schedule, but the function tracer will help there if needed. Reported-by: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 08:06:51 +0000