summaryrefslogtreecommitdiffstats
path: root/kernel/time
AgeCommit message (Collapse)AuthorFilesLines
2014-02-13tick: Clear broadcast pending bit when switching to oneshotThomas Gleixner1-0/+1
AMD systems which use the C1E workaround in the amd_e400_idle routine trigger the WARN_ON_ONCE in the broadcast code when onlining a CPU. The reason is that the idle routine of those AMD systems switches the cpu into forced broadcast mode early on before the newly brought up CPU can switch over to high resolution / NOHZ mode. The timer related CPU1 bringup looks like this: clockevent_register_device(local_apic); tick_setup(local_apic); ... idle() tick_broadcast_on_off(FORCE); tick_broadcast_oneshot_control(ENTER) cpumask_set(cpu, broadcast_oneshot_mask); halt(); Now the broadcast interrupt on CPU0 sets CPU1 in the broadcast_pending_mask and wakes CPU1. So CPU1 continues: local_apic_timer_interrupt() tick_handle_periodic(); softirq() tick_init_highres(); cpumask_clr(cpu, broadcast_oneshot_mask); tick_broadcast_oneshot_control(ENTER) WARN_ON(cpumask_test(cpu, broadcast_pending_mask); So while we remove CPU1 from the broadcast_oneshot_mask when we switch over to highres mode, we do not clear the pending bit, which then triggers the warning when we go back to idle. The reason why this is only visible on C1E affected AMD systems is that the other machines enter the deep sleep states via acpi_idle/intel_idle and exit the broadcast mode before executing the remote triggered local_apic_timer_interrupt. So the pending bit is already cleared when the switch over to highres mode is clearing the oneshot mask. The solution is simple: Clear the pending bit together with the mask bit when we switch over to highres mode. Stanislaw came up independently with the same patch by enforcing the C1E workaround and debugging the fallout. I picked mine, because mine has a changelog :) Reported-by: poma <pomidorabelisima@gmail.com> Debugged-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Olaf Hering <olaf@aepfle.de> Cc: Dave Jones <davej@redhat.com> Cc: Justin M. Forbes <jforbes@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1402111434180.21991@ionos.tec.linutronix.de Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-06time: Fix overflow when HZ is smaller than 60Mikulas Patocka1-0/+6
When compiling for the IA-64 ski emulator, HZ is set to 32 because the emulation is slow and we don't want to waste too many cycles processing timers. Alpha also has an option to set HZ to 32. This causes integer underflow in kernel/time/jiffies.c: kernel/time/jiffies.c:66:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] .mult = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */ ^ This patch reduces the JIFFIES_SHIFT value to avoid the overflow. Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1401241639100.23871@file01.intranet.prod.int.rdu2.redhat.com Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-01-25Merge branch 'timers/core' of ↵Ingo Molnar1-13/+14
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/urgent Pull dynticks cleanups from Frederic Weisbecker. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-20Merge branch 'timers-core-for-linus' of ↵Linus Torvalds5-55/+50
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: - ARM clocksource/clockevent improvements and fixes - generic timekeeping updates: TAI fixes/improvements, cleanups - Posix cpu timer cleanups and improvements - dynticks updates: full dynticks bugfixes, optimizations and cleanups * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) clocksource: Timer-sun5i: Switch to sched_clock_register() timekeeping: Remove comment that's mostly out of date rtc-cmos: Add an alarm disable quirk timekeeper: fix comment typo for tk_setup_internals() timekeeping: Fix missing timekeeping_update in suspend path timekeeping: Fix CLOCK_TAI timer/nanosleep delays tick/timekeeping: Call update_wall_time outside the jiffies lock timekeeping: Avoid possible deadlock from clock_was_set_delayed timekeeping: Fix potential lost pv notification of time change timekeeping: Fix lost updates to tai adjustment clocksource: sh_cmt: Add clk_prepare/unprepare support clocksource: bcm_kona_timer: Remove unused bcm_timer_ids clocksource: vt8500: Remove deprecated IRQF_DISABLED clocksource: tegra: Remove deprecated IRQF_DISABLED clocksource: misc drivers: Remove deprecated IRQF_DISABLED clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata() clocksource: sh_tmu: Remove unnecessary platform_set_drvdata() clocksource: armada-370-xp: Enable timer divider only when needed clocksource: clksrc-of: Warn if no clock sources are found clocksource: orion: Switch to sched_clock_register() ...
2014-01-20Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: - Add the initial implementation of SCHED_DEADLINE support: a real-time scheduling policy where tasks that meet their deadlines and periodically execute their instances in less than their runtime quota see real-time scheduling and won't miss any of their deadlines. Tasks that go over their quota get delayed (Available to privileged users for now) - Clean up and fix preempt_enable_no_resched() abuse all around the tree - Do sched_clock() performance optimizations on x86 and elsewhere - Fix and improve auto-NUMA balancing - Fix and clean up the idle loop - Apply various cleanups and fixes * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) sched: Fix __sched_setscheduler() nice test sched: Move SCHED_RESET_ON_FORK into attr::sched_flags sched: Fix up attr::sched_priority warning sched: Fix up scheduler syscall LTP fails sched: Preserve the nice level over sched_setscheduler() and sched_setparam() calls sched/core: Fix htmldocs warnings sched/deadline: No need to check p if dl_se is valid sched/deadline: Remove unused variables sched/deadline: Fix sparse static warnings m68k: Fix build warning in mac_via.h sched, thermal: Clean up preempt_enable_no_resched() abuse sched, net: Fixup busy_loop_us_clock() sched, net: Clean up preempt_enable_no_resched() abuse sched/preempt: Fix up missed PREEMPT_NEED_RESCHED folding sched/preempt, locking: Rework local_bh_{dis,en}able() sched/clock, x86: Avoid a runtime condition in native_sched_clock() sched/clock: Fix up clear_sched_clock_stable() sched/clock, x86: Use a static_key for sched_clock_stable sched/clock: Remove local_irq_disable() from the clocks sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs ...
2014-01-15nohz_full: fix code style issue of tick_nohz_full_stop_tickAlex Shi1-8/+8
Code usually starts with 'tab' instead of 7 'space' in kernel Signed-off-by: Alex Shi <alex.shi@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Link: http://lkml.kernel.org/r/1386074112-30754-2-git-send-email-alex.shi@linaro.org Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-15nohz: Get timekeeping max deferment outside jiffies_lockFrederic Weisbecker1-1/+2
We don't need to fetch the timekeeping max deferment under the jiffies_lock seqlock. If the clocksource is updated concurrently while we stop the tick, stop machine is called and the tick will be reevaluated again along with uptodate jiffies and its related values. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Link: http://lkml.kernel.org/r/1387320692-28460-9-git-send-email-fweisbec@gmail.com Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-15tick: Rename tick_check_idle() to tick_irq_enter()Frederic Weisbecker1-4/+4
This makes the code more symetric against the existing tick functions called on irq exit: tick_irq_exit() and tick_nohz_irq_exit(). These function are also symetric as they mirror each other's action: we start to account idle time on irq exit and we stop this accounting on irq entry. Also the tick is stopped on irq exit and timekeeping catches up with the tickless time elapsed until we reach irq entry. This rename was suggested by Peter Zijlstra a long while ago but it got forgotten in the mass. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Link: http://lkml.kernel.org/r/1387320692-28460-2-git-send-email-fweisbec@gmail.com Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-13sched/clock, x86: Use a static_key for sched_clock_stablePeter Zijlstra1-1/+1
In order to avoid the runtime condition and variable load turn sched_clock_stable into a static_key. Also provide a shorter implementation of local_clock() and cpu_clock(int) when sched_clock_stable==1. MAINLINE PRE POST sched_clock_stable: 1 1 1 (cold) sched_clock: 329841 221876 215295 (cold) local_clock: 301773 234692 220773 (warm) sched_clock: 38375 25602 25659 (warm) local_clock: 100371 33265 27242 (warm) rdtsc: 27340 24214 24208 sched_clock_stable: 0 0 0 (cold) sched_clock: 382634 235941 237019 (cold) local_clock: 396890 297017 294819 (warm) sched_clock: 38194 25233 25609 (warm) local_clock: 143452 71234 71232 (warm) rdtsc: 27345 24245 24243 Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-eummbdechzz37mwmpags1gjr@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12Merge branch 'fortglx/3.14/time' of ↵Ingo Molnar4-27/+29
git://git.linaro.org/people/john.stultz/linux into timers/core Pull timekeeping updates from John Stultz. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12Merge branch 'linus' into timers/coreIngo Molnar3-14/+28
Pick up the latest fixes and refresh the branch. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12sched_clock: Disable seqlock lockdep usage in sched_clock()John Stultz1-3/+3
Unfortunately the seqlock lockdep enablement can't be used in sched_clock(), since the lockdep infrastructure eventually calls into sched_clock(), which causes a deadlock. Thus, this patch changes all generic sched_clock() usage to use the raw_* methods. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Reported-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1388704274-5278-2-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-23timekeeping: Remove comment that's mostly out of dateJohn Stultz1-10/+0
Prior to 92bb1fcf57a0c2e45f7e67fbf0a8ed475a749236 (Only do nanosecond rounding on GENERIC_TIME_VSYSCALL_OLD systems), the comment here was accuate, but now we can mostly avoid the extra rounding which causes the unlikey to be actually likely here. So remove the out of date comment. Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23timekeeper: fix comment typo for tk_setup_internals()Yijing Wang1-1/+2
Fix trivial comment typo for tk_setup_internals(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23timekeeping: Fix missing timekeeping_update in suspend pathJohn Stultz1-0/+2
Since 48cdc135d4840 (Implement a shadow timekeeper), we have to call timekeeping_update() after any adjustment to the timekeeping structure in order to make sure that any adjustments to the structure persist. In the timekeeping suspend path, we udpate the timekeeper structure, so we should be sure to update the shadow-timekeeper before releasing the timekeeping locks. Currently this isn't done. In most cases, the next time related code to run would be timekeeping_resume, which does update the shadow-timekeeper, but in an abundence of caution, this patch adds the call to timekeeping_update() in the suspend path. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable <stable@vger.kernel.org> #3.10+ Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23timekeeping: Fix CLOCK_TAI timer/nanosleep delaysJohn Stultz1-2/+2
A think-o in the calculation of the monotonic -> tai time offset results in CLOCK_TAI timers and nanosleeps to expire late (the latency is ~2x the tai offset). Fix this by adding the tai offset from the realtime offset instead of subtracting. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable <stable@vger.kernel.org> #3.10+ Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23tick/timekeeping: Call update_wall_time outside the jiffies lockJohn Stultz4-15/+7
Since the xtime lock was split into the timekeeping lock and the jiffies lock, we no longer need to call update_wall_time() while holding the jiffies lock. Thus, this patch splits update_wall_time() out from do_timer(). This allows us to get away from calling clock_was_set_delayed() in update_wall_time() and instead use the standard clock_was_set() call that previously would deadlock, as it causes the jiffies lock to be acquired. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23timekeeping: Avoid possible deadlock from clock_was_set_delayedJohn Stultz1-2/+16
As part of normal operaions, the hrtimer subsystem frequently calls into the timekeeping code, creating a locking order of hrtimer locks -> timekeeping locks clock_was_set_delayed() was suppoed to allow us to avoid deadlocks between the timekeeping the hrtimer subsystem, so that we could notify the hrtimer subsytem the time had changed while holding the timekeeping locks. This was done by scheduling delayed work that would run later once we were out of the timekeeing code. But unfortunately the lock chains are complex enoguh that in scheduling delayed work, we end up eventually trying to grab an hrtimer lock. Sasha Levin noticed this in testing when the new seqlock lockdep enablement triggered the following (somewhat abrieviated) message: [ 251.100221] ====================================================== [ 251.100221] [ INFO: possible circular locking dependency detected ] [ 251.100221] 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 Not tainted [ 251.101967] ------------------------------------------------------- [ 251.101967] kworker/10:1/4506 is trying to acquire lock: [ 251.101967] (timekeeper_seq){----..}, at: [<ffffffff81160e96>] retrigger_next_event+0x56/0x70 [ 251.101967] [ 251.101967] but task is already holding lock: [ 251.101967] (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70 [ 251.101967] [ 251.101967] which lock already depends on the new lock. [ 251.101967] [ 251.101967] [ 251.101967] the existing dependency chain (in reverse order) is: [ 251.101967] -> #5 (hrtimer_bases.lock#11){-.-...}: [snipped] -> #4 (&rt_b->rt_runtime_lock){-.-...}: [snipped] -> #3 (&rq->lock){-.-.-.}: [snipped] -> #2 (&p->pi_lock){-.-.-.}: [snipped] -> #1 (&(&pool->lock)->rlock){-.-...}: [ 251.101967] [<ffffffff81194803>] validate_chain+0x6c3/0x7b0 [ 251.101967] [<ffffffff81194d9d>] __lock_acquire+0x4ad/0x580 [ 251.101967] [<ffffffff81194ff2>] lock_acquire+0x182/0x1d0 [ 251.101967] [<ffffffff84398500>] _raw_spin_lock+0x40/0x80 [ 251.101967] [<ffffffff81153e69>] __queue_work+0x1a9/0x3f0 [ 251.101967] [<ffffffff81154168>] queue_work_on+0x98/0x120 [ 251.101967] [<ffffffff81161351>] clock_was_set_delayed+0x21/0x30 [ 251.101967] [<ffffffff811c4bd1>] do_adjtimex+0x111/0x160 [ 251.101967] [<ffffffff811e2711>] compat_sys_adjtimex+0x41/0x70 [ 251.101967] [<ffffffff843a4b49>] ia32_sysret+0x0/0x5 [ 251.101967] -> #0 (timekeeper_seq){----..}: [snipped] [ 251.101967] other info that might help us debug this: [ 251.101967] [ 251.101967] Chain exists of: timekeeper_seq --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock#11 [ 251.101967] Possible unsafe locking scenario: [ 251.101967] [ 251.101967] CPU0 CPU1 [ 251.101967] ---- ---- [ 251.101967] lock(hrtimer_bases.lock#11); [ 251.101967] lock(&rt_b->rt_runtime_lock); [ 251.101967] lock(hrtimer_bases.lock#11); [ 251.101967] lock(timekeeper_seq); [ 251.101967] [ 251.101967] *** DEADLOCK *** [ 251.101967] [ 251.101967] 3 locks held by kworker/10:1/4506: [ 251.101967] #0: (events){.+.+.+}, at: [<ffffffff81154960>] process_one_work+0x200/0x530 [ 251.101967] #1: (hrtimer_work){+.+...}, at: [<ffffffff81154960>] process_one_work+0x200/0x530 [ 251.101967] #2: (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70 [ 251.101967] [ 251.101967] stack backtrace: [ 251.101967] CPU: 10 PID: 4506 Comm: kworker/10:1 Not tainted 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 [ 251.101967] Workqueue: events clock_was_set_work So the best solution is to avoid calling clock_was_set_delayed() while holding the timekeeping lock, and instead using a flag variable to decide if we should call clock_was_set() once we've released the locks. This works for the case here, where the do_adjtimex() was the deadlock trigger point. Unfortuantely, in update_wall_time() we still hold the jiffies lock, which would deadlock with the ipi triggered by clock_was_set(), preventing us from calling it even after we drop the timekeeping lock. So instead call clock_was_set_delayed() at that point. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: stable <stable@vger.kernel.org> #3.10+ Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23timekeeping: Fix potential lost pv notification of time changeJohn Stultz1-9/+11
In 780427f0e11 (Indicate that clock was set in the pvclock gtod notifier), logic was added to pass a CLOCK_WAS_SET notification to the pvclock notifier chain. While that patch added a action flag returned from accumulate_nsecs_to_secs(), it only uses the returned value in one location, and not in the logarithmic accumulation. This means if a leap second triggered during the logarithmic accumulation (which is most likely where it would happen), the notification that the clock was set would not make it to the pv notifiers. This patch extends the logarithmic_accumulation pass down that action flag so proper notification will occur. This patch also changes the varialbe action -> clock_set per Ingo's suggestion. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: <xen-devel@lists.xen.org> Cc: stable <stable@vger.kernel.org> #3.11+ Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23timekeeping: Fix lost updates to tai adjustmentJohn Stultz1-1/+2
Since 48cdc135d4840 (Implement a shadow timekeeper), we have to call timekeeping_update() after any adjustment to the timekeeping structure in order to make sure that any adjustments to the structure persist. Unfortunately, the updates to the tai offset via adjtimex do not trigger this update, causing adjustments to the tai offset to be made and then over-written by the previous value at the next update_wall_time() call. This patch resovles the issue by calling timekeeping_update() right after setting the tai offset. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable <stable@vger.kernel.org> #3.10+ Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-02nohz: Convert a few places to use local per cpu accessesFrederic Weisbecker3-28/+21
A few functions use remote per CPU access APIs when they deal with local values. Just do the right conversion to improve performance, code readability and debug checks. While at it, lets extend some of these function names with *_this_cpu() suffix in order to display their purpose more clearly. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-11-29nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=offThomas Gleixner1-1/+3
If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ. If CONFIG_NO_HZ=y and the nohz functionality is disabled via the command line option "nohz=off" or not enabled due to missing hardware support, then tick_nohz_get_sleep_length() returns 0. That happens because ts->sleep_length is never set in that case. Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive. Reported-by: Michal Hocko <mhocko@suse.cz> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-11-22time: Fix 1ns/tick drift w/ GENERIC_TIME_VSYSCALL_OLDMartin Schwidefsky1-1/+1
Since commit 1e75fa8be9f (time: Condense timekeeper.xtime into xtime_sec - merged in v3.6), there has been an problem with the error accounting in the timekeeping code, such that when truncating to nanoseconds, we round up to the next nsec, but the balancing adjustment to the ntp_error value was dropped. This causes 1ns per tick drift forward of the clock. In 3.7, this logic was isolated to only GENERIC_TIME_VSYSCALL_OLD architectures (s390, ia64, powerpc). The fix is simply to balance the accounting and to subtract the added nanosecond from ntp_error. This allows the internal long-term clock steering to keep the clock accurate. While this fix removes the regression added in 1e75fa8be9f, the ideal solution is to move away from GENERIC_TIME_VSYSCALL_OLD and use the new VSYSCALL method, which avoids entirely the nanosecond granular rounding, and the resulting short-term clock adjustment oscillation needed to keep long term accurate time. [ jstultz: Many thanks to Martin for his efforts identifying this subtle bug, and providing the fix. ] Originally-from: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Paul Turner <pjt@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable <stable@vger.kernel.org> #v3.6+ Link: http://lkml.kernel.org/r/1385149491-20307-1-git-send-email-john.stultz@linaro.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-11-19tick: Document tick_do_timer_cpuAndrew Morton1-0/+15
Taken straight from a tglx email ;) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-11-19NOHZ: Check for nohz active instead of nohz enabledThomas Gleixner1-12/+9
RCU and the fine grained idle time accounting functions check tick_nohz_enabled. But that variable is merily telling that NOHZ has been enabled in the config and not been disabled on the command line. But it does not tell anything about nohz being active. That's what all this should check for. Matthew reported, that the idle accounting on his old P1 machine showed bogus values, when he enabled NOHZ in the config and did not disable it on the kernel command line. The reason is that his machine uses (refined) jiffies as a clocksource which explains why the "fine" grained accounting went into lala land, because it depends on when the system goes and leaves idle relative to the jiffies increment. Provide a tick_nohz_active indicator and let RCU and the accounting code use this instead of tick_nohz_enable. Reported-and-tested-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: john.stultz@linaro.org Cc: mwhitehe@redhat.com Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311132052240.30673@ionos.tec.linutronix.de
2013-11-12Merge branch 'timers-core-for-linus' of ↵Linus Torvalds10-84/+107
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: "Main changes in this cycle were: - Updated full dynticks support. - Event stream support for architected (ARM) timers. - ARM clocksource driver updates. - Move arm64 to using the generic sched_clock framework & resulting cleanup in the generic sched_clock code. - Misc fixes and cleanups" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) x86/time: Honor ACPI FADT flag indicating absence of a CMOS RTC clocksource: sun4i: remove IRQF_DISABLED clocksource: sun4i: Report the minimum tick that we can program clocksource: sun4i: Select CLKSRC_MMIO clocksource: Provide timekeeping for efm32 SoCs clocksource: em_sti: convert to clk_prepare/unprepare time: Fix signedness bug in sysfs_get_uname() and its callers timekeeping: Fix some trivial typos in comments alarmtimer: return EINVAL instead of ENOTSUPP if rtcdev doesn't exist clocksource: arch_timer: Do not register arch_sys_counter twice timer stats: Add a 'Collection: active/inactive' line to timer usage statistics sched_clock: Remove sched_clock_func() hook arch_timer: Move to generic sched_clock framework clocksource: tcb_clksrc: Remove IRQF_DISABLED clocksource: tcb_clksrc: Improve driver robustness clocksource: tcb_clksrc: Replace clk_enable/disable with clk_prepare_enable/disable_unprepare clocksource: arm_arch_timer: Use clocksource for suspend timekeeping clocksource: dw_apb_timer_of: Mark a few more functions as __init clocksource: Put nodes passed to CLOCKSOURCE_OF_DECLARE callbacks centrally arm: zynq: Enable arm_global_timer ...
2013-10-23clockevents: Sanitize ticks to nsec conversionThomas Gleixner1-15/+50
Marc Kleine-Budde pointed out, that commit 77cc982 "clocksource: use clockevents_config_and_register() where possible" caused a regression for some of the converted subarchs. The reason is, that the clockevents core code converts the minimal hardware tick delta to a nanosecond value for core internal usage. This conversion is affected by integer math rounding loss, so the backwards conversion to hardware ticks will likely result in a value which is less than the configured hardware limitation. The affected subarchs used their own workaround (SIGH!) which got lost in the conversion. The solution for the issue at hand is simple: adding evt->mult - 1 to the shifted value before the integer divison in the core conversion function takes care of it. But this only works for the case where for the scaled math mult/shift pair "mult <= 1 << shift" is true. For the case where "mult > 1 << shift" we can apply the rounding add only for the minimum delta value to make sure that the backward conversion is not less than the given hardware limit. For the upper bound we need to omit the rounding add, because the backwards conversion is always larger than the original latch value. That would violate the upper bound of the hardware device. Though looking closer at the details of that function reveals another bogosity: The upper bounds check is broken as well. Checking for a resulting "clc" value greater than KTIME_MAX after the conversion is pointless. The conversion does: u64 clc = (latch << evt->shift) / evt->mult; So there is no sanity check for (latch << evt->shift) exceeding the 64bit boundary. The latch argument is "unsigned long", so on a 64bit arch the handed in argument could easily lead to an unnoticed shift overflow. With the above rounding fix applied the calculation before the divison is: u64 clc = (latch << evt->shift) + evt->mult - 1; So we need to make sure, that neither the shift nor the rounding add is overflowing the u64 boundary. [ukl: move assignment to rnd after eventually changing mult, fix build issue and correct comment with the right math] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: nicolas.ferre@atmel.com Cc: Marc Pignat <marc.pignat@hevs.ch> Cc: john.stultz@linaro.org Cc: kernel@pengutronix.de Cc: Ronald Wahl <ronald.wahl@raritan.com> Cc: LAK <linux-arm-kernel@lists.infradead.org> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1380052223-24139-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-10-18time: Fix signedness bug in sysfs_get_uname() and its callersPatrick Palka3-3/+3
sysfs_get_uname() is erroneously declared as returning size_t even though it may return a negative value, specifically -EINVAL. Its callers then check whether its return value is less than zero and indeed that is never the case for size_t. This patch changes sysfs_get_uname() to return ssize_t and makes sure its callers use ssize_t accordingly. Signed-off-by: Patrick Palka <patrick@parcs.ath.cx> [jstultz: Didn't apply cleanly, as a similar partial fix was also applied so had to resolve the collisions] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-10-18timekeeping: Fix some trivial typos in commentsXie XiuQi1-1/+2
Fix some typos in timekeeping comments. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> [jstultz: Commit message tweaks] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-10-18alarmtimer: return EINVAL instead of ENOTSUPP if rtcdev doesn't existKOSAKI Motohiro1-2/+2
Fedora Ruby maintainer reported latest Ruby doesn't work on Fedora Rawhide on ARM. (http://bugs.ruby-lang.org/issues/9008) Because of, commit 1c6b39ad3f (alarmtimers: Return -ENOTSUPP if no RTC device is present) intruduced to return ENOTSUPP when clock_get{time,res} can't find a RTC device. However this is incorrect. First, ENOTSUPP isn't exported to userland (ENOTSUP or EOPNOTSUP are the closest userland equivlents). Second, Posix and Linux man pages agree that clock_gettime and clock_getres should return EINVAL if clk_id argument is invalid. While the arugment that the clockid is valid, but just not supported on this hardware could be made, this is just a technicality that doesn't help userspace applicaitons, and only complicates error handling. Thus, this patch changes the code to use EINVAL. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: stable <stable@vger.kernel.org> #3.0 and up Reported-by: Vit Ondruch <v.ondruch@tiscali.cz> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> [jstultz: Tweaks to commit message to include full rational] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-10-10timer stats: Add a 'Collection: active/inactive' line to timer usage statisticsDong Zhu1-4/+4
We can enable/disable timer statistics collection via: echo [1|0] > /proc/timers_stats and it would be nice if apps had the ability to check what the current collection status is. This patch adds a 'Collection: active/inactive' line to display the current timer collection status. Also bump up the timer stats version to v0.3. Signed-off-by: Dong Zhu <bluezhudong@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20131010075618.GH2139@zhudong.nay.redhat.com [ Improved the changelog and the code. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-10Merge branch 'fortglx/3.13/time' of ↵Ingo Molnar2-10/+3
git://git.linaro.org/people/jstultz/linux into timers/core Pull more timekeeping items for v3.13 from John Stultz: * Small cleanup in the clocksource code. * Fix for rtc-pl031 to let it work with alarmtimers. * Move arm64 to using the generic sched_clock framework & resulting cleanup in the generic sched_clock code. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09sched_clock: Remove sched_clock_func() hookStephen Boyd1-8/+1
Nobody is using sched_clock_func() anymore now that sched_clock supports up to 64 bits. Remove the hook so that new code only uses sched_clock_register(). Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-10-03Merge branch 'clockevents/3.13' of ↵Ingo Molnar1-0/+1
git://git.linaro.org/people/dlezcano/linux into timers/core Pull (mostly) ARM clocksource driver updates from Daniel Lezcano: " - Soren Brinkmann added FEAT_PERCPU to a clock device when it is local per cpu. This feature prevents the clock framework to choose a per cpu timer as a broadcast timer. This problem arised when the ARM global timer is used when switching to the broadcast timer which is the case now on Xillinx with its cpuidle driver. - Stephen Boyd extended the generic sched_clock code to support 64bit counters and removes the setup_sched_clock deprecation, as that causes lots of warnings since there's still users in the arch/arm tree. He added also the CLOCK_SOURCE_SUSPEND_NONSTOP flag on the architected timer as they continue counting during suspend. - Uwe Kleine-König added some missing __init sections and consolidated the code by moving the of_node_put call from the drivers to the function clocksource_of_init. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-03Merge branch 'timers/core' of ↵Ingo Molnar1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core Merge updated full dynticks support from Frederic Weisbecker: - support 32-bit systems (full dynticks was 64-bit only before) - support ARM Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-03Merge tag 'v3.12-rc3' into timers/coreIngo Molnar2-4/+4
Merge Linux 3.12-rc3 - refresh the tree with the latest fixes before merging new bits. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-02tick: broadcast: Deny per-cpu clockevents from being broadcast sourcesSoren Brinkmann1-0/+1
On most ARM systems the per-cpu clockevents are truly per-cpu in the sense that they can't be controlled on any other CPU besides the CPU that they interrupt. If one of these clockevents were to become a broadcast source we will run into a lot of trouble because the broadcast source is enabled on the first CPU to go into deep idle (if that CPU suffers from FEAT_C3_STOP) and that could be a different CPU than what the clockevent is interrupting (or even worse the CPU that the clockevent interrupts could be offline). Theoretically it's possible to support per-cpu clockevents as the broadcast source but so far we haven't needed this and supporting it is rather complicated. Let's just deny the possibility for now until this becomes a reality (let's hope it never does!). Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
2013-09-30nohz: Drop generic vtime obsolete dependency on CONFIG_64BITKevin Hilman1-1/+0
The CONFIG_64BIT requirement on vtime can finally be removed since we now depend on HAVE_VIRT_CPU_ACCOUNTING_GEN which already takes care of the arch ability to handle nsecs based cputime_t safely. Signed-off-by: Kevin Hilman <khilman@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Arm Linux <linux-arm-kernel@lists.infradead.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-09-30vtime: Add HAVE_VIRT_CPU_ACCOUNTING_GEN KconfigKevin Hilman1-0/+1
With VIRT_CPU_ACCOUNTING_GEN, cputime_t becomes 64-bit. In order to use that feature, arch code should be audited to ensure there are no races in concurrent read/write of cputime_t. For example, reading/writing 64-bit cputime_t on some 32-bit arches may require multiple accesses for low and high value parts, so proper locking is needed to protect against concurrent accesses. Therefore, add CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN which arches can enable after they've been audited for potential races. This option is automatically enabled on 64-bit platforms. Feature requested by Frederic Weisbecker. Signed-off-by: Kevin Hilman <khilman@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Arm Linux <linux-arm-kernel@lists.infradead.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-09-18Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "An NTP related lockup fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix HRTICK related deadlock from ntp lock changes
2013-09-17clocksource: Fix 'ret' data type of sysfs_override_clocksource() and ↵Elad Wexler1-2/+2
sysfs_unbind_clocksource() sysfs_override_clocksource(): The expression 'if (ret >= 0)' is always true. This will cause clocksource_select() to always run. Thus modified ret to be of type ssize_t. sysfs_unbind_clocksource(): The expression 'if (ret < 0)' is always false. So in case sysfs_get_uname() failed, the expression won't take an effect. Thus modified ret to be of type ssize_t. Signed-off-by: Elad Wexler <elad.wexler@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-09-16Merge branch 'fortglx/3.12/time' into fortglx/3.13/timeJohn Stultz2-1/+3
Merge in the timekeeping changes that missed 3.12 Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-09-16Merge branch 'fortglx/3.12/sched-clock64-base' into fortglx/3.13/timeJohn Stultz2-65/+91
Merge in 64bit sched_clock support that missed 3.12. Conflicts: kernel/time/sched_clock.c Signed-off-by: John.Stultz <john.stultz@linaro.org>
2013-09-12timekeeping: Fix HRTICK related deadlock from ntp lock changesJohn Stultz2-4/+4
Gerlando Falauto reported that when HRTICK is enabled, it is possible to trigger system deadlocks. These were hard to reproduce, as HRTICK has been broken in the past, but seemed to be connected to the timekeeping_seq lock. Since seqlock/seqcount's aren't supported w/ lockdep, I added some extra spinlock based locking and triggered the following lockdep output: [ 15.849182] ntpd/4062 is trying to acquire lock: [ 15.849765] (&(&pool->lock)->rlock){..-...}, at: [<ffffffff810aa9b5>] __queue_work+0x145/0x480 [ 15.850051] [ 15.850051] but task is already holding lock: [ 15.850051] (timekeeper_lock){-.-.-.}, at: [<ffffffff810df6df>] do_adjtimex+0x7f/0x100 <snip> [ 15.850051] Chain exists of: &(&pool->lock)->rlock --> &p->pi_lock --> timekeeper_lock [ 15.850051] Possible unsafe locking scenario: [ 15.850051] [ 15.850051] CPU0 CPU1 [ 15.850051] ---- ---- [ 15.850051] lock(timekeeper_lock); [ 15.850051] lock(&p->pi_lock); [ 15.850051] lock(timekeeper_lock); [ 15.850051] lock(&(&pool->lock)->rlock); [ 15.850051] [ 15.850051] *** DEADLOCK *** The deadlock was introduced by 06c017fdd4dc48451a ("timekeeping: Hold timekeepering locks in do_adjtimex and hardpps") in 3.10 This patch avoids this deadlock, by moving the call to schedule_delayed_work() outside of the timekeeper lock critical section. Reported-by: Gerlando Falauto <gerlando.falauto@keymile.com> Tested-by: Lin Ming <minggr@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable <stable@vger.kernel.org> #3.11, 3.10 Link: http://lkml.kernel.org/r/1378943457-27314-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-04Merge branch 'timers-nohz-for-linus' of ↵Linus Torvalds2-33/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timers/nohz changes from Ingo Molnar: "It mostly contains fixes and full dynticks off-case optimizations, by Frederic Weisbecker" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) nohz: Include local CPU in full dynticks global kick nohz: Optimize full dynticks's sched hooks with static keys nohz: Optimize full dynticks state checks with static keys nohz: Rename a few state variables vtime: Always debug check snapshot source _before_ updating it vtime: Always scale generic vtime accounting results vtime: Optimize full dynticks accounting off case with static keys vtime: Describe overriden functions in dedicated arch headers m68k: hardirq_count() only need preempt_mask.h hardirq: Split preempt count mask definitions context_tracking: Split low level state headers vtime: Fix racy cputime delta update vtime: Remove a few unneeded generic vtime state checks context_tracking: User/kernel broundary cross trace events context_tracking: Optimize context switch off case with static keys context_tracking: Optimize guest APIs off case with static key context_tracking: Optimize main APIs off case with static key context_tracking: Ground setup for static key use context_tracking: Remove full dynticks' hacky dependency on wide context tracking nohz: Only enable context tracking on full dynticks CPUs ...
2013-09-03Merge branch 'rcu/next' of ↵Ingo Molnar1-0/+50
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: " * Update RCU documentation. These were posted to LKML at https://lkml.org/lkml/2013/8/19/611. * Miscellaneous fixes. These were posted to LKML at https://lkml.org/lkml/2013/8/19/619. * Full-system idle detection. This is for use by Frederic Weisbecker's adaptive-ticks mechanism. Its purpose is to allow the timekeeping CPU to shut off its tick when all other CPUs are idle. These were posted to LKML at https://lkml.org/lkml/2013/8/19/648. * Improve rcutorture test coverage. These were posted to LKML at https://lkml.org/lkml/2013/8/19/675. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-31nohz_full: Add full-system-idle state machinePaul E. McKenney1-0/+27
This commit adds the state machine that takes the per-CPU idle data as input and produces a full-system-idle indication as output. This state machine is driven out of RCU's quiescent-state-forcing mechanism, which invokes rcu_sysidle_check_cpu() to collect per-CPU idle state and then rcu_sysidle_report() to drive the state machine. The full-system-idle state is sampled using rcu_sys_is_idle(), which also drives the state machine if RCU is idle (and does so by forcing RCU to become non-idle). This function returns true if all but the timekeeping CPU (tick_do_timer_cpu) are idle and have been idle long enough to avoid memory contention on the full_sysidle_state state variable. The rcu_sysidle_force_exit() may be called externally to reset the state machine back into non-idle state. For large systems the state machine is driven out of RCU's force-quiescent-state logic, which provides good scalability at the price of millisecond-scale latencies on the transition to full-system-idle state. This is not so good for battery-powered systems, which are usually small enough that they don't need to care about scalability, but which do care deeply about energy efficiency. Small systems therefore drive the state machine directly out of the idle-entry code. The number of CPUs in a "small" system is defined by a new NO_HZ_FULL_SYSIDLE_SMALL Kconfig parameter, which defaults to 8. Note that this is a build-time definition. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> [ paulmck: Use true and false for boolean constants per Lai Jiangshan. ] Reviewed-by: Josh Triplett <josh@joshtriplett.org> [ paulmck: Simplify logic and provide better comments for memory barriers, based on review comments and questions by Lai Jiangshan. ]
2013-08-28timer_list: correct the iterator for timer_listNathan Zimmer1-17/+24
Correct an issue with /proc/timer_list reported by Holger. When reading from the proc file with a sufficiently small buffer, 2k so not really that small, there was one could get hung trying to read the file a chunk at a time. The timer_list_start function failed to account for the possibility that the offset was adjusted outside the timer_list_next. Signed-off-by: Nathan Zimmer <nzimmer@sgi.com> Reported-by: Holger Hans Peter Freyther <holger@freyther.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Berke Durak <berke.durak@xiphos.com> Cc: Jeff Layton <jlayton@redhat.com> Tested-by: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> # 3.10.x Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-22ntp: Make periodic RTC update more reliableMiroslav Lichvar1-1/+2
The current code requires that the scheduled update of the RTC happens in the closest tick to the half of the second. This seems to be difficult to achieve reliably. The scheduled work may be missing the target time by a tick or two and be constantly rescheduled every second. Relax the limit to 10 ticks. As a typical RTC drifts in the 11-minute update interval by several milliseconds, this shouldn't affect the overall accuracy of the RTC much. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-08-19Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three small fixlets" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: fix compile warning in tick_nohz_init() nohz: Do not warn about unstable tsc unless user uses nohz_full sched_clock: Fix integer overflow
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-31 03:07:24 +0000