summaryrefslogtreecommitdiffstats
path: root/kernel/time/ntp.c
AgeCommit message (Collapse)AuthorFilesLines
2019-11-12ntp/y2038: Remove incorrect time_t truncationArnd Bergmann1-1/+1
A cast to 'time_t' was accidentally left in place during the conversion of __do_adjtimex() to 64-bit timestamps, so the resulting value is incorrectly truncated. Remove the cast so the 64-bit time gets propagated correctly. Fixes: ead25417f82e ("timex: use __kernel_timex internally") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20191108203435.112759-2-arnd@arndb.de
2019-06-22ntp: Limit TAI-UTC offsetMiroslav Lichvar1-1/+3
Don't allow the TAI-UTC offset of the system clock to be set by adjtimex() to a value larger than 100000 seconds. This prevents an overflow in the conversion to int, prevents the CLOCK_TAI clock from getting too far ahead of the CLOCK_REALTIME clock, and it is still large enough to allow leap seconds to be inserted at the maximum rate currently supported by the kernel (once per day) for the next ~270 years, however unlikely it is that someone can survive a catastrophic event which slowed down the rotation of the Earth so much. Reported-by: Weikang shi <swkhack@gmail.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190618154713.20929-1-mlichvar@redhat.com
2019-05-16Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull time fixes from Ingo Molnar: "A TIA adjtimex interface extension, and a POSIX compliance ABI fix for timespec64 users" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp: Allow TAI-UTC offset to be set to zero y2038: Make CONFIG_64BIT_TIME unconditional
2019-05-09ntp: Allow TAI-UTC offset to be set to zeroMiroslav Lichvar1-1/+1
The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock. It is typically set by NTP/PTP implementations and it is automatically updated by the kernel on leap seconds. The initial value is zero (which applications may interpret as unknown), but this value cannot be set by adjtimex. This limitation seems to go back to the original "nanokernel" implementation by David Mills. Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in order to allow setting it back to the initial value. Fixes: 153b5d054ac2 ("ntp: support for TAI") Suggested-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.com
2019-04-15ntp: Audit NTP parameters adjustmentOndrej Mosnacek1-3/+19
Emit an audit record every time selected NTP parameters are modified from userspace (via adjtimex(2) or clock_adjtime(2)). These parameters may be used to indirectly change system clock, and thus their modifications should be audited. Such events will now generate records of type AUDIT_TIME_ADJNTPVAL containing the following fields: - op -- which value was adjusted: - offset -- corresponding to the time_offset variable - freq -- corresponding to the time_freq variable - status -- corresponding to the time_status variable - adjust -- corresponding to the time_adjust variable - tick -- corresponding to the tick_usec variable - tai -- corresponding to the timekeeping's TAI offset - old -- the old value - new -- the new value Example records: type=TIME_ADJNTPVAL msg=audit(1530616044.507:7): op=status old=64 new=8256 type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=freq old=0 new=49180377088000 The records of this type will be associated with the corresponding syscall records. An overview of parameter changes that can be done via do_adjtimex() (based on information from Miroslav Lichvar) and whether they are audited: __timekeeping_set_tai_offset() -- sets the offset from the International Atomic Time (AUDITED) NTP variables: time_offset -- can adjust the clock by up to 0.5 seconds per call and also speed it up or slow down by up to about 0.05% (43 seconds per day) (AUDITED) time_freq -- can speed up or slow down by up to about 0.05% (AUDITED) time_status -- can insert/delete leap seconds and it also enables/ disables synchronization of the hardware real-time clock (AUDITED) time_maxerror, time_esterror -- change error estimates used to inform userspace applications (NOT AUDITED) time_constant -- controls the speed of the clock adjustments that are made when time_offset is set (NOT AUDITED) time_adjust -- can temporarily speed up or slow down the clock by up to 0.05% (AUDITED) tick_usec -- a more extreme version of time_freq; can speed up or slow down the clock by up to 10% (AUDITED) Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-07timex: use __kernel_timex internallyDeepa Dinamani1-8/+10
struct timex is not y2038 safe. Replace all uses of timex with y2038 safe __kernel_timex. Note that struct __kernel_timex is an ABI interface definition. We could define a new structure based on __kernel_timex that is only available internally instead. Right now, there isn't a strong motivation for this as the structure is isolated to a few defined struct timex interfaces and such a structure would be exactly the same as struct timex. The patch was generated by the following coccinelle script: virtual patch @depends on patch forall@ identifier ts; expression e; @@ ( - struct timex ts; + struct __kernel_timex ts; | - struct timex ts = {}; + struct __kernel_timex ts = {}; | - struct timex ts = e; + struct __kernel_timex ts = e; | - struct timex *ts; + struct __kernel_timex *ts; | (memset \| copy_from_user \| copy_to_user \)(..., - sizeof(struct timex)) + sizeof(struct __kernel_timex)) ) @depends on patch forall@ identifier ts; identifier fn; @@ fn(..., - struct timex *ts, + struct __kernel_timex *ts, ...) { ... } @depends on patch forall@ identifier ts; identifier fn; @@ fn(..., - struct timex *ts) { + struct __kernel_timex *ts) { ... } Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: linux-alpha@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-28Merge tag 'y2038-for-4.21' of ↵Linus Torvalds1-9/+1
ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 updates from Arnd Bergmann: "More syscalls and cleanups This concludes the main part of the system call rework for 64-bit time_t, which has spread over most of year 2018, the last six system calls being - ppoll - pselect6 - io_pgetevents - recvmmsg - futex - rt_sigtimedwait As before, nothing changes for 64-bit architectures, while 32-bit architectures gain another entry point that differs only in the layout of the timespec structure. Hopefully in the next release we can wire up all 22 of those system calls on all 32-bit architectures, which gives us a baseline version for glibc to start using them. This does not include the clock_adjtime, getrusage/waitid, and getitimer/setitimer system calls. I still plan to have new versions of those as well, but they are not required for correct operation of the C library since they can be emulated using the old 32-bit time_t based system calls. Aside from the system calls, there are also a few cleanups here, removing old kernel internal interfaces that have become unused after all references got removed. The arch/sh cleanups are part of this, there were posted several times over the past year without a reaction from the maintainers, while the corresponding changes made it into all other architectures" * tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: timekeeping: remove obsolete time accessors vfs: replace current_kernel_time64 with ktime equivalent timekeeping: remove timespec_add/timespec_del timekeeping: remove unused {read,update}_persistent_clock sh: remove board_time_init() callback sh: remove unused rtc_sh_get/set_time infrastructure sh: sh03: rtc: push down rtc class ops into driver sh: dreamcast: rtc: push down rtc class ops into driver y2038: signal: Add compat_sys_rt_sigtimedwait_time64 y2038: signal: Add sys_rt_sigtimedwait_time32 y2038: socket: Add compat_sys_recvmmsg_time64 y2038: futex: Add support for __kernel_timespec y2038: futex: Move compat implementation into futex.c io_pgetevents: use __kernel_timespec pselect6: use __kernel_timespec ppoll: use __kernel_timespec signal: Add restore_user_sigmask() signal: Add set_user_sigmask()
2018-12-18timekeeping: remove unused {read,update}_persistent_clockArnd Bergmann1-9/+1
After arch/sh has removed the last reference to these functions, we can remove them completely and just rely on the 64-bit time_t based versions. This cleans up a rather ugly use of __weak functions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: John Stultz <john.stultz@linaro.org>
2018-12-18ntp: Remove duplicated includeYueHaibing1-1/+0
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <john.stultz@linaro.org> Cc: <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20181209062225.4344-1-yuehaibing@huawei.com
2018-07-19timekeeping/ntp: Constify some function argumentsOndrej Mosnacek1-3/+3
Add 'const' to some function arguments and variables to make it easier to read the code. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> [jstultz: Also fixup pre-existing checkpatch warnings for prototype arguments with no variable name] Signed-off-by: John Stultz <john.stultz@linaro.org>
2018-07-19ntp: Use kstrtos64 for s64 variableOndrej Mosnacek1-3/+2
...instead of kstrtol with a dirty cast. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2018-07-19ntp: Remove redundant argumentsOndrej Mosnacek1-6/+4
The 'ts' argument of process_adj_status() and process_adjtimex_modes() is unused and can be safely removed. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2018-06-19timekeeping: Use ktime_get_real_ts64() instead of getnstimeofday64()Arnd Bergmann1-3/+3
The two do the same, this moves all users to the newer name for consistency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: y2038@lists.linaro.org Cc: Stephen Boyd <sboyd@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Link: https://lkml.kernel.org/r/20180618140811.2998503-3-arnd@arndb.de
2018-04-06jiffies: Introduce USER_TICK_USEC and redefine TICK_USECRafael J. Wysocki1-1/+1
Since the subsequent changes will need a TICK_USEC definition analogous to TICK_NSEC, rename the existing TICK_USEC as USER_TICK_USEC, update its users and redefine TICK_USEC accordingly. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-114/+113
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30timekeeping: Consolidate timekeeping_inject_offset codeArnd Bergmann1-61/+0
The code to check the adjtimex() or clock_adjtime() arguments is spread out across multiple files for presumably only historic reasons. As a preparatation for a rework to get rid of the use of 'struct timeval' and 'struct timespec' in there, this moves all the portions into kernel/time/timekeeping.c and marks them as 'static'. The warp_clock() function here is not as closely related as the others, but I feel it still makes sense to move it here in order to consolidate all callers of timekeeping_inject_offset(). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> [jstultz: Whitespace fixup] Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-10-30rtc: Allow rtc drivers to specify the tv_nsec value for ntpJason Gunthorpe1-53/+113
ntp is currently hardwired to try and call the rtc set when wall clock tv_nsec is 0.5 seconds. This historical behaviour works well with certain PC RTCs, but is not universal to all rtc hardware. Change how this works by introducing the driver specific concept of set_offset_nsec, the delay between current wall clock time and the target time to set (with a 0 tv_nsecs). For x86-style CMOS set_offset_nsec should be -0.5 s which causes the last second to be written 0.5 s after it has started. For compat with the old rtc_set_ntp_time, the value is defaulted to + 0.5 s, which causes the next second to be written 0.5s before it starts, as things were before this patch. Testing shows many non-x86 RTCs would like set_offset_nsec ~= 0, so ultimately each RTC driver should set the set_offset_nsec according to its needs, and non x86 architectures should stop using update_persistent_clock64 in order to access this feature. Future patches will revise the drivers as needed. Since CMOS and RTC now have very different handling they are split into two dedicated code paths, sharing the support code, and ifdefs are replaced with IS_ENABLED. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-12-25ktime: Get rid of the unionThomas Gleixner1-1/+1
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-01-22ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANOJohn Stultz1-2/+12
Recently, in commit 37cf4dc3370f I forgot to check if the timeval being passed was actually a timespec (as is signaled with ADJ_NANO). This resulted in that patch breaking ADJ_SETOFFSET users who set ADJ_NANO, by rejecting valid timespecs that were compared with valid timeval ranges. This patch addresses this by checking for the ADJ_NANO flag and using the timepsec check instead in that case. Reported-by: Harald Hoyer <harald@redhat.com> Reported-by: Kay Sievers <kay@vrfy.org> Fixes: 37cf4dc3370f "time: Verify time values in adjtimex ADJ_SETOFFSET to avoid overflow" Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: David Herrmann <dh.herrmann@gmail.com> Link: http://lkml.kernel.org/r/1453417415-19110-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-16ntp: Fix second_overflow's input parameter type to be 64bitsDengChao1-7/+9
The function "second_overflow" uses "unsign long" as its input parameter type which will overflow after year 2106 on 32bit systems. Thus this patch replaces it with time64_t type. While the 64-bit division is expensive, "next_ntp_leap_sec" has been calculated already, so we can just re-use it in the TIME_INS/DEL cases, allowing one expensive division per leapsecond instead of re-doing the divsion once a second after the leap flag has been set. Signed-off-by: DengChao <chao.deng@linaro.org> [jstultz: Tweaked commit message] Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-12-16ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_secondsDengChao1-4/+6
The type of static variant "time_reftime" and the call of get_seconds in ntp are both not y2038 safe. So change the type of time_reftime to time64_t and replace get_seconds with __ktime_get_real_seconds. The local variant "secs" in ntp_update_offset represents seconds between now and last ntp adjustment, it seems impossible that this time will last more than 68 years, so keep its type as "long". Reviewed-by: John Stultz <john.stultz@linaro.org> Signed-off-by: DengChao <chao.deng@linaro.org> [jstultz: Tweaked commit message] Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-12-10time: Verify time values in adjtimex ADJ_SETOFFSET to avoid overflowJohn Stultz1-2/+8
For adjtimex()'s ADJ_SETOFFSET, make sure the tv_usec value is sane. We might multiply them later which can cause an overflow and undefined behavior. This patch introduces new helper functions to simplify the checking code and adds comments to clarify Orginally this patch was by Sasha Levin, but I've basically rewritten it, so he should get credit for finding the issue and I should get the blame for any mistakes made since. Also, credit to Richard Cochran for the phrasing used in the comment for what is considered valid here. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-12-10ntp: Verify offset doesn't overflow in ntp_update_offsetSasha Levin1-3/+5
We need to make sure that the offset is valid before manipulating it, otherwise it might overflow on the multiplication. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> [jstultz: Reworked one of the checks so it makes more sense] Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-10-01ntp: use timespec64 in sync_cmos_clockArnd Bergmann1-2/+2
The sync_cmos_clock has one use of struct timespec, which we want to eventually replace with timespec64 or similar in the kernel. There is no way this one can overflow, but the conversion to timespec64 is trivial and has no other dependencies. Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-10-01ntp/pps: use timespec64 for hardpps()Arnd Bergmann1-6/+6
There is only one user of the hardpps function in the kernel, so it makes sense to atomically change it over to using 64-bit timestamps for y2038 safety. In the hardpps implementation, we also need to change the pps_normtime structure, which is similar to struct timespec and also requires a 64-bit seconds portion. This introduces two temporary variables in pps_kc_event() to do the conversion, they will be removed again in the next step, which seemed preferable to having a larger patch changing it all at the same time. Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-08-17time: Add the common weak version of update_persistent_clock()Xunlei Pang1-0/+5
The weak update_persistent_clock64() calls update_persistent_clock(), if the architecture defines an update_persistent_clock64() to replace and remove its update_persistent_clock() version, when building the kernel the linker will throw an undefined symbol error, that is, any arch that switches to update_persistent_clock64() will have this issue. To solve the issue, we add the common weak update_persistent_clock(). Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-06-12ntp: Do leapsecond adjustment in adjtimex read pathJohn Stultz1-0/+18
Since the leapsecond is applied at tick-time, this means there is a small window of time at the start of a leap-second where we cross into the next second before applying the leap. This patch modified adjtimex so that the leap-second is applied on the second edge. Providing more correct leapsecond behavior. This does make it so that adjtimex()'s returned time values can be inconsistent with time values read from gettimeofday() or clock_gettime(CLOCK_REALTIME,...) for a brief period of one tick at the leapsecond. However, those other interfaces do not provide the TIME_OOP time_state return that adjtimex() provides, which allows the leapsecond to be properly represented. They instead only see a time discontinuity, and cannot tell the first 23:59:59 from the repeated 23:59:59 leap second. This seems like a reasonable tradeoff given clock_gettime() / gettimeofday() cannot properly represent a leapsecond, and users likely care more about performance, while folks who are using adjtimex() more likely care about leap-second correctness. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1434063297-28657-5-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edgeJohn Stultz1-7/+35
Currently, leapsecond adjustments are done at tick time. As a result, the leapsecond was applied at the first timer tick *after* the leapsecond (~1-10ms late depending on HZ), rather then exactly on the second edge. This was in part historical from back when we were always tick based, but correcting this since has been avoided since it adds extra conditional checks in the gettime fastpath, which has performance overhead. However, it was recently pointed out that ABS_TIME CLOCK_REALTIME timers set for right after the leapsecond could fire a second early, since some timers may be expired before we trigger the timekeeping timer, which then applies the leapsecond. This isn't quite as bad as it sounds, since behaviorally it is similar to what is possible w/ ntpd made leapsecond adjustments done w/o using the kernel discipline. Where due to latencies, timers may fire just prior to the settimeofday call. (Also, one should note that all applications using CLOCK_REALTIME timers should always be careful, since they are prone to quirks from settimeofday() disturbances.) However, the purpose of having the kernel do the leap adjustment is to avoid such latencies, so I think this is worth fixing. So in order to properly keep those timers from firing a second early, this patch modifies the ntp and timekeeping logic so that we keep enough state so that the update_base_offsets_now accessor, which provides the hrtimer core the current time, can check and apply the leapsecond adjustment on the second edge. This prevents the hrtimer core from expiring timers too early. This patch does not modify any other time read path, so no additional overhead is incurred. However, this also means that the leap-second continues to be applied at tick time for all other read-paths. Apologies to Richard Cochran, who pushed for similar changes years ago, which I resisted due to the concerns about the performance overhead. While I suspect this isn't extremely critical, folks who care about strict leap-second correctness will likely want to watch this. Potentially a -stable candidate eventually. Originally-suggested-by: Richard Cochran <richardcochran@gmail.com> Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com> Reported-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1434063297-28657-4-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12ntp: Introduce and use SECS_PER_DAY macro instead of 86400John Stultz1-2/+3
Currently the leapsecond logic uses what looks like magic values. Improve this by defining SECS_PER_DAY and using that macro to make the logic more clear. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1434063297-28657-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-03time: Add y2038 safe update_persistent_clock64()Xunlei Pang1-1/+12
As part of addressing in-kernel y2038 issues, this patch adds update_persistent_clock64() and replaces all the call sites of update_persistent_clock() with this function. This is a __weak implementation, which simply calls the existing y2038 unsafe update_persistent_clock(). This allows architecture specific implementations to be converted independently, and eventually y2038-unsafe update_persistent_clock() can be removed after all its architecture specific implementations have been converted to update_persistent_clock64(). Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-4-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01tick: Move clocksource related stuff to timekeeping.hThomas Gleixner1-1/+0
Move clocksource related stuff to timekeeping.h and remove the pointless include from ntp.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/2714218.nM5AEfAHj0@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18ntp: Fixup adjtimex freq validation on 32-bit systemsJohn Stultz1-3/+7
Additional validation of adjtimex freq values to avoid potential multiplication overflows were added in commit 5e5aeb4367b (time: adjtimex: Validate the ADJ_FREQUENCY values) Unfortunately the patch used LONG_MAX/MIN instead of LLONG_MAX/MIN, which was fine on 64-bit systems, but being much smaller on 32-bit systems caused false positives resulting in most direct frequency adjustments to fail w/ EINVAL. ntpd only does direct frequency adjustments at startup, so the issue was not as easily observed there, but other time sync applications like ptpd and chrony were more effected by the bug. See bugs: https://bugzilla.kernel.org/show_bug.cgi?id=92481 https://bugzilla.redhat.com/show_bug.cgi?id=1188074 This patch changes the checks to use LLONG_MAX for clarity, and additionally the checks are disabled on 32-bit systems since LLONG_MAX/PPM_SCALE is always larger then the 32-bit long freq value, so multiplication overflows aren't possible there. Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Reported-by: George Joseph <george.joseph@fairview5.com> Tested-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> # v3.19+ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/r/1423553436-29747-1-git-send-email-john.stultz@linaro.org [ Prettified the changelog and the comments a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-09Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "The main changes in this cycle were: - rework hrtimer expiry calculation in hrtimer_interrupt(): the previous code had a subtle bug where expiry caching would miss an expiry, resulting in occasional bogus (late) expiry of hrtimers. - continuing Y2038 fixes - ktime division optimization - misc smaller fixes and cleanups" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Make __hrtimer_get_next_event() static rtc: Convert rtc_set_ntp_time() to use timespec64 rtc: Remove redundant rtc_valid_tm() from rtc_hctosys() rtc: Modify rtc_hctosys() to address y2038 issues rtc: Update rtc-dev to use y2038-safe time interfaces rtc: Update interface.c to use y2038-safe time interfaces time: Expose get_monotonic_boottime64 for in-kernel use time: Expose getboottime64 for in-kernel uses ktime: Optimize ktime_divns for constant divisors hrtimer: Prevent stale expiry time in hrtimer_interrupt() ktime.h: Introduce ktime_ms_delta
2015-01-23rtc: Convert rtc_set_ntp_time() to use timespec64Xunlei Pang1-2/+2
rtc_set_ntp_time() uses timespec which is y2038-unsafe, so modify to use timespec64 which is y2038-safe, then replace rtc_time_to_tm() with rtc_time64_to_tm(). Also adjust all its call sites(only NTP uses it) accordingly. Cc: pang.xunlei <pang.xunlei@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-01-07time: adjtimex: Validate the ADJ_FREQUENCY valuesSasha Levin1-0/+7
Verify that the frequency value from userspace is valid and makes sense. Unverified values can cause overflows later on. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> [jstultz: Fix up bug for negative values and drop redunent cap check] Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-23timekeeping: Provide timespec64 based interfacesThomas Gleixner1-3/+4
To convert callers of the core code to timespec64 we need to provide the proper interfaces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-23timekeeping: Convert timekeeping core to use timespec64sJohn Stultz1-4/+4
Convert the core timekeeping logic to use timespec64s. This moves the 2038 issues out of the core logic and into all of the accessor functions. Future changes will need to push the timespec64s out to all timekeeping users, but that can be done interface by interface. Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-06-04Merge branch 'akpm' (patchbomb from Andrew) into nextLinus Torvalds1-6/+9
Merge misc updates from Andrew Morton: - a few fixes for 3.16. Cc'ed to stable so they'll get there somehow. - various misc fixes and cleanups - most of the ocfs2 queue. Review is slow... - most of MM. The MM queue is pretty huge this time, but not much in the way of feature work. - some tweaks under kernel/ - printk maintenance work - updates to lib/ - checkpatch updates - tweaks to init/ * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (276 commits) fs/autofs4/dev-ioctl.c: add __init to autofs_dev_ioctl_init fs/ncpfs/getopt.c: replace simple_strtoul by kstrtoul init/main.c: remove an ifdef kthreads: kill CLONE_KERNEL, change kernel_thread(kernel_init) to avoid CLONE_SIGHAND init/main.c: add initcall_blacklist kernel parameter init/main.c: don't use pr_debug() fs/binfmt_flat.c: make old_reloc() static fs/binfmt_elf.c: fix bool assignements fs/efs: convert printk(KERN_DEBUG to pr_debug fs/efs: add pr_fmt / use __func__ fs/efs: convert printk to pr_foo() scripts/checkpatch.pl: device_initcall is not the only __initcall substitute checkpatch: check stable email address checkpatch: warn on unnecessary void function return statements checkpatch: prefer kstrto<foo> to sscanf(buf, "%<lhuidx>", &bar); checkpatch: add warning for kmalloc/kzalloc with multiply checkpatch: warn on #defines ending in semicolon checkpatch: make --strict a default for files in drivers/net and net/ checkpatch: always warn on missing blank line after variable declaration block checkpatch: fix wildcard DT compatible string checking ...
2014-06-04timekeeping: use printk_deferred when holding timekeeping seqlockJohn Stultz1-6/+9
Jiri Bohac pointed out that there are rare but potential deadlock possibilities when calling printk while holding the timekeeping seqlock. This is due to printk() triggering console sem wakeup, which can cause scheduling code to trigger hrtimers which may try to read the time. Specifically, as Jiri pointed out, that path is: printk vprintk_emit console_unlock up(&console_sem) __up wake_up_process try_to_wake_up ttwu_do_activate ttwu_activate activate_task enqueue_task enqueue_task_fair hrtick_update hrtick_start_fair hrtick_start_fair get_time ktime_get --> endless loop on read_seqcount_retry(&timekeeper_seq, ...) This patch tries to avoid this issue by using printk_deferred (previously named printk_sched) which should defer printing via a irq_work_queue. Signed-off-by: John Stultz <john.stultz@linaro.org> Reported-by: Jiri Bohac <jbohac@suse.cz> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-12ntp: Make is_error_status() use its argumentGeorge Spelvin1-6/+6
is_error_status() is an inline function always called with the global time_status as an argument, so there's zero functional difference with this change, but the non-CONFIG_NTP_PPS version uses the passed-in argument, while the CONFIG_NTP_PPS one ignores its argument and uses the global. Looks like is_error_status was refactored out, but someone forgot to change the logic to check the local argument value. Thus this patch makes it use the argument always; shorter variable names are good. Signed-off-by: George Spelvin <linux@horizon.com> [jstultz: Tweaked commit message] Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-05-12ntp: Convert simple_strtol to kstrtolFabian Frederick1-1/+4
Replace obsolete function simple_strtol w/ kstrtol Inspired-By: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> [jstultz: Tweak commit message] Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-02-07timekeeping: Move clock sync work to power efficient workqueueShaibal Dutta1-2/+3
For better use of CPU idle time, allow the scheduler to select the CPU on which the CMOS clock sync work would be scheduled. This improves idle residency time and conserver power. This functionality is enabled when CONFIG_WQ_POWER_EFFICIENT is selected. Signed-off-by: Shaibal Dutta <shaibal.dutta@broadcom.com> [zoran.markovic@linaro.org: Added commit message. Aligned code.] Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/1391195904-12497-1-git-send-email-zoran.markovic@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-10-03Merge tag 'v3.12-rc3' into timers/coreIngo Molnar1-4/+2
Merge Linux 3.12-rc3 - refresh the tree with the latest fixes before merging new bits. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-12timekeeping: Fix HRTICK related deadlock from ntp lock changesJohn Stultz1-4/+2
Gerlando Falauto reported that when HRTICK is enabled, it is possible to trigger system deadlocks. These were hard to reproduce, as HRTICK has been broken in the past, but seemed to be connected to the timekeeping_seq lock. Since seqlock/seqcount's aren't supported w/ lockdep, I added some extra spinlock based locking and triggered the following lockdep output: [ 15.849182] ntpd/4062 is trying to acquire lock: [ 15.849765] (&(&pool->lock)->rlock){..-...}, at: [<ffffffff810aa9b5>] __queue_work+0x145/0x480 [ 15.850051] [ 15.850051] but task is already holding lock: [ 15.850051] (timekeeper_lock){-.-.-.}, at: [<ffffffff810df6df>] do_adjtimex+0x7f/0x100 <snip> [ 15.850051] Chain exists of: &(&pool->lock)->rlock --> &p->pi_lock --> timekeeper_lock [ 15.850051] Possible unsafe locking scenario: [ 15.850051] [ 15.850051] CPU0 CPU1 [ 15.850051] ---- ---- [ 15.850051] lock(timekeeper_lock); [ 15.850051] lock(&p->pi_lock); [ 15.850051] lock(timekeeper_lock); [ 15.850051] lock(&(&pool->lock)->rlock); [ 15.850051] [ 15.850051] *** DEADLOCK *** The deadlock was introduced by 06c017fdd4dc48451a ("timekeeping: Hold timekeepering locks in do_adjtimex and hardpps") in 3.10 This patch avoids this deadlock, by moving the call to schedule_delayed_work() outside of the timekeeper lock critical section. Reported-by: Gerlando Falauto <gerlando.falauto@keymile.com> Tested-by: Lin Ming <minggr@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable <stable@vger.kernel.org> #3.11, 3.10 Link: http://lkml.kernel.org/r/1378943457-27314-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-22ntp: Make periodic RTC update more reliableMiroslav Lichvar1-1/+2
The current code requires that the scheduled update of the RTC happens in the closest tick to the half of the second. This seems to be difficult to achieve reliably. The scheduled work may be missing the target time by a tick or two and be constantly rescheduled every second. Relax the limit to 10 ticks. As a typical RTC drifts in the 11-minute update interval by several milliseconds, this shouldn't affect the overall accuracy of the RTC much. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-28ntp: Remove unused variable flags in __hardppsGeert Uytterhoeven1-1/+0
kernel/time/ntp.c: In function ‘__hardpps’: kernel/time/ntp.c:877: warning: unused variable ‘flags’ commit a076b2146fabb0894cae5e0189a8ba3f1502d737 ("ntp: Remove ntp_lock, using the timekeeping locks to protect ntp state") removed its users, but not the actual variable. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-04-04ntp: Remove ntp_lock, using the timekeeping locks to protect ntp stateJohn Stultz1-37/+4
In order to properly handle the NTP state in future changes to the timekeeping lock management, this patch moves the management of all of the ntp state under the timekeeping locks. This allows us to remove the ntp_lock. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-04-04timekeeping: Move ADJ_SETOFFSET to top level do_adjtimex()John Stultz1-11/+0
Since ADJ_SETOFFSET adjusts the timekeeping state, process it as part of the top level do_adjtimex() function in timekeeping.c. This avoids deadlocks that could occur once we change the ntp locking rules. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-04-04ntp: Rework do_adjtimex to take timespec and tai argumentsJohn Stultz1-13/+5
In order to change the locking rules, we need to provide the timespec and tai values rather then having the ntp logic acquire these values itself. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 13:31:27 +0000