| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Apart from subsystem specific .proc_handler handler, all ctl_tables with
extra1 and extra2 members set should use proc_dointvec_minmax instead of
proc_dointvec, or the limit set in extra* never work and potentially echo
underflow values(negative numbers) is likely make system unstable.
Especially vfs_cache_pressure and zone_reclaim_mode, -1 is apparently not
a valid value, but we can set to them. And then kernel may crash.
# echo -1 > /proc/sys/vm/vfs_cache_pressure
Link: https://lkml.kernel.org/r/20201223105535.2875-1-linf@wangsu.com
Signed-off-by: Lin Feng <linf@wangsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some stalls are transient, so that system fully recovers. This commit
therefore allows users to configure the number of stalls that must happen
in order to trigger kernel panic.
Signed-off-by: chao <chao@eero.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") made
the page locking entirely fair, in that if a waiter came in while the
lock was held, the lock would be transferred to the lockers strictly in
order.
That was intended to finally get rid of the long-reported watchdog
failures that involved the page lock under extreme load, where a process
could end up waiting essentially forever, as other page lockers stole
the lock from under it.
It also improved some benchmarks, but it ended up causing huge
performance regressions on others, simply because fair lock behavior
doesn't end up giving out the lock as aggressively, causing better
worst-case latency, but potentially much worse average latencies and
throughput.
Instead of reverting that change entirely, this introduces a controlled
amount of unfairness, with a sysctl knob to tune it if somebody needs
to. But the default value should hopefully be good for any normal load,
allowing a few rounds of lock stealing, but enforcing the strict
ordering before the lock has been stolen too many times.
There is also a hint from Matthieu Baerts that the fair page coloring
may end up exposing an ABBA deadlock that is hidden by the usual
optimistic lock stealing, and while the unfairness doesn't fix the
fundamental issue (and I'm still looking at that), it avoids it in
practice.
The amount of unfairness can be modified by writing a new value to the
'sysctl_page_lock_unfairness' variable (default value of 5, exposed
through /proc/sys/vm/page_lock_unfairness), but that is hopefully
something we'd use mainly for debugging rather than being necessary for
any deep system tuning.
This whole issue has exposed just how critical the page lock can be, and
how contended it gets under certain locks. And the main contention
doesn't really seem to be anything related to IO (which was the origin
of this lock), but for things like just verifying that the page file
mapping is stable while faulting in the page into a page table.
Link: https://lore.kernel.org/linux-fsdevel/ed8442fd-6f54-dd84-cd4a-941e8b7ee603@MichaelLarabel.com/
Link: https://www.phoronix.com/scan.php?page=article&item=linux-50-59&num=1
Link: https://lore.kernel.org/linux-fsdevel/c560a38d-8313-51fb-b1ec-e904bd8836bc@tessares.net/
Reported-and-tested-by: Michael Larabel <Michael@michaellarabel.com>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of bpf_stats_handler to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/sysctl.c:226:49: warning: incorrect type in argument 3 (different address spaces)
kernel/sysctl.c:226:49: expected void *
kernel/sysctl.c:226:49: got void [noderef] __user *buffer
kernel/sysctl.c:2640:35: warning: incorrect type in initializer (incompatible argument 3 (different address spaces))
kernel/sysctl.c:2640:35: expected int ( [usertype] *proc_handler )( ... )
kernel/sysctl.c:2640:35: got int ( * )( ... )
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20200824142047.22043-1-tklauser@distanz.ch
|
|
Proactive compaction uses per-node/zone "fragmentation score" which is
always in range [0, 100], so use unsigned type of these scores as well as
for related constants.
Signed-off-by: Nitin Gupta <nigupta@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200618010319.13159-1-nigupta@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For some applications, we need to allocate almost all memory as hugepages.
However, on a running system, higher-order allocations can fail if the
memory is fragmented. Linux kernel currently does on-demand compaction as
we request more hugepages, but this style of compaction incurs very high
latency. Experiments with one-time full memory compaction (followed by
hugepage allocations) show that kernel is able to restore a highly
fragmented memory state to a fairly compacted memory state within <1 sec
for a 32G system. Such data suggests that a more proactive compaction can
help us allocate a large fraction of memory as hugepages keeping
allocation latencies low.
For a more proactive compaction, the approach taken here is to define a
new sysctl called 'vm.compaction_proactiveness' which dictates bounds for
external fragmentation which kcompactd tries to maintain.
The tunable takes a value in range [0, 100], with a default of 20.
Note that a previous version of this patch [1] was found to introduce too
many tunables (per-order extfrag{low, high}), but this one reduces them to
just one sysctl. Also, the new tunable is an opaque value instead of
asking for specific bounds of "external fragmentation", which would have
been difficult to estimate. The internal interpretation of this opaque
value allows for future fine-tuning.
Currently, we use a simple translation from this tunable to [low, high]
"fragmentation score" thresholds (low=100-proactiveness, high=low+10%).
The score for a node is defined as weighted mean of per-zone external
fragmentation. A zone's present_pages determines its weight.
To periodically check per-node score, we reuse per-node kcompactd threads,
which are woken up every 500 milliseconds to check the same. If a node's
score exceeds its high threshold (as derived from user-provided
proactiveness value), proactive compaction is started until its score
reaches its low threshold value. By default, proactiveness is set to 20,
which implies threshold values of low=80 and high=90.
This patch is largely based on ideas from Michal Hocko [2]. See also the
LWN article [3].
Performance data
================
System: x64_64, 1T RAM, 80 CPU threads.
Kernel: 5.6.0-rc3 + this patch
echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/enabled
echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/defrag
Before starting the driver, the system was fragmented from a userspace
program that allocates all memory and then for each 2M aligned section,
frees 3/4 of base pages using munmap. The workload is mainly anonymous
userspace pages, which are easy to move around. I intentionally avoided
unmovable pages in this test to see how much latency we incur when
hugepage allocations hit direct compaction.
1. Kernel hugepage allocation latencies
With the system in such a fragmented state, a kernel driver then allocates
as many hugepages as possible and measures allocation latency:
(all latency values are in microseconds)
- With vanilla 5.6.0-rc3
percentile latency
–––––––––– –––––––
5 7894
10 9496
25 12561
30 15295
40 18244
50 21229
60 27556
75 30147
80 31047
90 32859
95 33799
Total 2M hugepages allocated = 383859 (749G worth of hugepages out of 762G
total free => 98% of free memory could be allocated as hugepages)
- With 5.6.0-rc3 + this patch, with proactiveness=20
sysctl -w vm.compaction_proactiveness=20
percentile latency
–––––––––– –––––––
5 2
10 2
25 3
30 3
40 3
50 4
60 4
75 4
80 4
90 5
95 429
Total 2M hugepages allocated = 384105 (750G worth of hugepages out of 762G
total free => 98% of free memory could be allocated as hugepages)
2. JAVA heap allocation
In this test, we first fragment memory using the same method as for (1).
Then, we start a Java process with a heap size set to 700G and request the
heap to be allocated with THP hugepages. We also set THP to madvise to
allow hugepage backing of this heap.
/usr/bin/time
java -Xms700G -Xmx700G -XX:+UseTransparentHugePages -XX:+AlwaysPreTouch
The above command allocates 700G of Java heap using hugepages.
- With vanilla 5.6.0-rc3
17.39user 1666.48system 27:37.89elapsed
- With 5.6.0-rc3 + this patch, with proactiveness=20
8.35user 194.58system 3:19.62elapsed
Elapsed time remains around 3:15, as proactiveness is further increased.
Note that proactive compaction happens throughout the runtime of these
workloads. The situation of one-time compaction, sufficient to supply
hugepages for following allocation stream, can probably happen for more
extreme proactiveness values, like 80 or 90.
In the above Java workload, proactiveness is set to 20. The test starts
with a node's score of 80 or higher, depending on the delay between the
fragmentation step and starting the benchmark, which gives more-or-less
time for the initial round of compaction. As t he benchmark consumes
hugepages, node's score quickly rises above the high threshold (90) and
proactive compaction starts again, which brings down the score to the low
threshold level (80). Repeat.
bpftrace also confirms proactive compaction running 20+ times during the
runtime of this Java benchmark. kcompactd threads consume 100% of one of
the CPUs while it tries to bring a node's score within thresholds.
Backoff behavior
================
Above workloads produce a memory state which is easy to compact. However,
if memory is filled with unmovable pages, proactive compaction should
essentially back off. To test this aspect:
- Created a kernel driver that allocates almost all memory as hugepages
followed by freeing first 3/4 of each hugepage.
- Set proactiveness=40
- Note that proactive_compact_node() is deferred maximum number of times
with HPAGE_FRAG_CHECK_INTERVAL_MSEC of wait between each check
(=> ~30 seconds between retries).
[1] https://patchwork.kernel.org/patch/11098289/
[2] https://lore.kernel.org/linux-mm/20161230131412.GI13301@dhcp22.suse.cz/
[3] https://lwn.net/Articles/817905/
Signed-off-by: Nitin Gupta <nigupta@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nitin Gupta <ngupta@nitingupta.dev>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Link: http://lkml.kernel.org/r/20200616204527.19185-1-nigupta@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When checking a performance change for will-it-scale scalability mmap test
[1], we found very high lock contention for spinlock of percpu counter
'vm_committed_as':
94.14% 0.35% [kernel.kallsyms] [k] _raw_spin_lock_irqsave
48.21% _raw_spin_lock_irqsave;percpu_counter_add_batch;__vm_enough_memory;mmap_region;do_mmap;
45.91% _raw_spin_lock_irqsave;percpu_counter_add_batch;__do_munmap;
Actually this heavy lock contention is not always necessary. The
'vm_committed_as' needs to be very precise when the strict
OVERCOMMIT_NEVER policy is set, which requires a rather small batch number
for the percpu counter.
So keep 'batch' number unchanged for strict OVERCOMMIT_NEVER policy, and
lift it to 64X for OVERCOMMIT_ALWAYS and OVERCOMMIT_GUESS policies. Also
add a sysctl handler to adjust it when the policy is reconfigured.
Benchmark with the same testcase in [1] shows 53% improvement on a 8C/16T
desktop, and 2097%(20X) on a 4S/72C/144T server. We tested with test
platforms in 0day (server, desktop and laptop), and 80%+ platforms shows
improvements with that test. And whether it shows improvements depends on
if the test mmap size is bigger than the batch number computed.
And if the lift is 16X, 1/3 of the platforms will show improvements,
though it should help the mmap/unmap usage generally, as Michal Hocko
mentioned:
: I believe that there are non-synthetic worklaods which would benefit from
: a larger batch. E.g. large in memory databases which do large mmaps
: during startups from multiple threads.
[1] https://lore.kernel.org/lkml/20200305062138.GI5972@shao2-debian/
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Qian Cai <cai@lca.pw>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1589611660-89854-4-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1592725000-73486-4-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1594389708-60781-5-git-send-email-feng.tang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
RT tasks by default run at the highest capacity/performance level. When
uclamp is selected this default behavior is retained by enforcing the
requested uclamp.min (p->uclamp_req[UCLAMP_MIN]) of the RT tasks to be
uclamp_none(UCLAMP_MAX), which is SCHED_CAPACITY_SCALE; the maximum
value.
This is also referred to as 'the default boost value of RT tasks'.
See commit 1a00d999971c ("sched/uclamp: Set default clamps for RT tasks").
On battery powered devices, it is desired to control this default
(currently hardcoded) behavior at runtime to reduce energy consumed by
RT tasks.
For example, a mobile device manufacturer where big.LITTLE architecture
is dominant, the performance of the little cores varies across SoCs, and
on high end ones the big cores could be too power hungry.
Given the diversity of SoCs, the new knob allows manufactures to tune
the best performance/power for RT tasks for the particular hardware they
run on.
They could opt to further tune the value when the user selects
a different power saving mode or when the device is actively charging.
The runtime aspect of it further helps in creating a single kernel image
that can be run on multiple devices that require different tuning.
Keep in mind that a lot of RT tasks in the system are created by the
kernel. On Android for instance I can see over 50 RT tasks, only
a handful of which created by the Android framework.
To control the default behavior globally by system admins and device
integrator, introduce the new sysctl_sched_uclamp_util_min_rt_default
to change the default boost value of the RT tasks.
I anticipate this to be mostly in the form of modifying the init script
of a particular device.
To avoid polluting the fast path with unnecessary code, the approach
taken is to synchronously do the update by traversing all the existing
tasks in the system. This could race with a concurrent fork(), which is
dealt with by introducing sched_post_fork() function which will ensure
the racy fork will get the right update applied.
Tested on Juno-r2 in combination with the RT capacity awareness [1].
By default an RT task will go to the highest capacity CPU and run at the
maximum frequency, which is particularly energy inefficient on high end
mobile devices because the biggest core[s] are 'huge' and power hungry.
With this patch the RT task can be controlled to run anywhere by
default, and doesn't cause the frequency to be maximum all the time.
Yet any task that really needs to be boosted can easily escape this
default behavior by modifying its requested uclamp.min value
(p->uclamp_req[UCLAMP_MIN]) via sched_setattr() syscall.
[1] 804d402fb6f6: ("sched/rt: Make RT capacity-aware")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200716110347.19553-2-qais.yousef@arm.com
|
|
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726161357.397880775@infradead.org
|
|
Users with SYS_ADMIN capability can add arbitrary taint flags to the
running kernel by writing to /proc/sys/kernel/tainted or issuing the
command 'sysctl -w kernel.tainted=...'. This interface, however, is
open for any integer value and this might cause an invalid set of flags
being committed to the tainted_mask bitset.
This patch introduces a simple way for proc_taint() to ignore any
eventual invalid bit coming from the user input before committing those
bits to the kernel tainted_mask.
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Link: http://lkml.kernel.org/r/20200512223946.888020-1-aquini@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Usually when the kernel reaches an oops condition, it's a point of no
return; in case not enough debug information is available in the kernel
splat, one of the last resorts would be to collect a kernel crash dump
and analyze it. The problem with this approach is that in order to
collect the dump, a panic is required (to kexec-load the crash kernel).
When in an environment of multiple virtual machines, users may prefer to
try living with the oops, at least until being able to properly shutdown
their VMs / finish their important tasks.
This patch implements a way to collect a bit more debug details when an
oops event is reached, by printing all the CPUs backtraces through the
usage of NMIs (on architectures that support that). The sysctl added
(and documented) here was called "oops_all_cpu_backtrace", and when set
will (as the name suggests) dump all CPUs backtraces.
Far from ideal, this may be the last option though for users that for
some reason cannot panic on oops. Most of times oopses are clear enough
to indicate the kernel portion that must be investigated, but in virtual
environments it's possible to observe hypervisor/KVM issues that could
lead to oopses shown in other guests CPUs (like virtual APIC crashes).
This patch hence aims to help debug such complex issues without
resorting to kdump.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200327224116.21030-1-gpiccoli@canonical.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
detected
Commit 401c636a0eeb ("kernel/hung_task.c: show all hung tasks before
panic") introduced a change in that we started to show all CPUs
backtraces when a hung task is detected _and_ the sysctl/kernel
parameter "hung_task_panic" is set. The idea is good, because usually
when observing deadlocks (that may lead to hung tasks), the culprit is
another task holding a lock and not necessarily the task detected as
hung.
The problem with this approach is that dumping backtraces is a slightly
expensive task, specially printing that on console (and specially in
many CPU machines, as servers commonly found nowadays). So, users that
plan to collect a kdump to investigate the hung tasks and narrow down
the deadlock definitely don't need the CPUs backtrace on dmesg/console,
which will delay the panic and pollute the log (crash tool would easily
grab all CPUs traces with 'bt -a' command).
Also, there's the reciprocal scenario: some users may be interested in
seeing the CPUs backtraces but not have the system panic when a hung
task is detected. The current approach hence is almost as embedding a
policy in the kernel, by forcing the CPUs backtraces' dump (only) on
hung_task_panic.
This patch decouples the panic event on hung task from the CPUs
backtraces dump, by creating (and documenting) a new sysctl called
"hung_task_all_cpu_backtrace", analog to the approach taken on soft/hard
lockups, that have both a panic and an "all_cpu_backtrace" sysctl to
allow individual control. The new mechanism for dumping the CPUs
backtraces on hung task detection respects "hung_task_warnings" by not
dumping the traces in case there's no warnings left.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: http://lkml.kernel.org/r/20200327223646.20779-1-gpiccoli@canonical.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Analogously to the introduction of panic_on_warn, this patch introduces
a kernel option named panic_on_taint in order to provide a simple and
generic way to stop execution and catch a coredump when the kernel gets
tainted by any given flag.
This is useful for debugging sessions as it avoids having to rebuild the
kernel to explicitly add calls to panic() into the code sites that
introduce the taint flags of interest.
For instance, if one is interested in proceeding with a post-mortem
analysis at the point a given code path is hitting a bad page (i.e.
unaccount_page_cache_page(), or slab_bug()), a coredump can be collected
by rebooting the kernel with 'panic_on_taint=0x20' amended to the
command line.
Another, perhaps less frequent, use for this option would be as a means
for assuring a security policy case where only a subset of taints, or no
single taint (in paranoid mode), is allowed for the running system. The
optional switch 'nousertaint' is handy in this particular scenario, as
it will avoid userspace induced crashes by writes to sysctl interface
/proc/sys/kernel/tainted causing false positive hits for such policies.
[akpm@linux-foundation.org: tweak kernel-parameters.txt wording]
Suggested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/20200515175502.146720-1-aquini@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge more updates from Andrew Morton:
"More mm/ work, plenty more to come
Subsystems affected by this patch series: slub, memcg, gup, kasan,
pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs,
thp, mmap, kconfig"
* akpm: (131 commits)
arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
riscv: support DEBUG_WX
mm: add DEBUG_WX support
drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
powerpc/mm: drop platform defined pmd_mknotpresent()
mm: thp: don't need to drain lru cache when splitting and mlocking THP
hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
sparc32: register memory occupied by kernel as memblock.memory
include/linux/memblock.h: fix minor typo and unclear comment
mm, mempolicy: fix up gup usage in lookup_node
tools/vm/page_owner_sort.c: filter out unneeded line
mm: swap: memcg: fix memcg stats for huge pages
mm: swap: fix vmstats for huge pages
mm: vmscan: limit the range of LRU type balancing
mm: vmscan: reclaim writepage is IO cost
mm: vmscan: determine anon/file pressure balance at the reclaim root
mm: balance LRU lists based on relative thrashing
mm: only count actual rotations as LRU reclaim cost
...
|
|
With the advent of fast random IO devices (SSDs, PMEM) and in-memory swap
devices such as zswap, it's possible for swap to be much faster than
filesystems, and for swapping to be preferable over thrashing filesystem
caches.
Allow setting swappiness - which defines the rough relative IO cost of
cache misses between page cache and swap-backed pages - to reflect such
situations by making the swap-preferred range configurable.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-4-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
|
The variable sysctl_panic_on_stackoverflow is used in
arch/parisc/kernel/irq.c and arch/x86/kernel/irq_32.c, but the sysctl file
interface panic_on_stackoverflow only exists on x86.
Add sysctl file interface panic_on_stackoverflow for parisc
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The newly added bpf_stats_handler function has the wrong #ifdef
check around it, leading to an unused-function warning when
CONFIG_SYSCTL is disabled:
kernel/sysctl.c:205:12: error: unused function 'bpf_stats_handler' [-Werror,-Wunused-function]
static int bpf_stats_handler(struct ctl_table *table, int write,
Fix the check to match the reference.
Fixes: d46edd671a14 ("bpf: Sharing bpf runtime stats with BPF_ENABLE_STATS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200505140734.503701-1-arnd@arndb.de
|
|
Currently, sysctl kernel.bpf_stats_enabled controls BPF runtime stats.
Typical userspace tools use kernel.bpf_stats_enabled as follows:
1. Enable kernel.bpf_stats_enabled;
2. Check program run_time_ns;
3. Sleep for the monitoring period;
4. Check program run_time_ns again, calculate the difference;
5. Disable kernel.bpf_stats_enabled.
The problem with this approach is that only one userspace tool can toggle
this sysctl. If multiple tools toggle the sysctl at the same time, the
measurement may be inaccurate.
To fix this problem while keep backward compatibility, introduce a new
bpf command BPF_ENABLE_STATS. On success, this command enables stats and
returns a valid fd. BPF_ENABLE_STATS takes argument "type". Currently,
only one type, BPF_STATS_RUN_TIME, is supported. We can extend the
command to support other types of stats in the future.
With BPF_ENABLE_STATS, user space tool would have the following flow:
1. Get a fd with BPF_ENABLE_STATS, and make sure it is valid;
2. Check program run_time_ns;
3. Sleep for the monitoring period;
4. Check program run_time_ns again, calculate the difference;
5. Close the fd.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200430071506.1408910-2-songliubraving@fb.com
|
|
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Move the sysctl tables to the end of the file to avoid lots of pointless
forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Extern declarations in .c files are a bad style and can lead to
mismatches. Use existing definitions in headers where they exist,
and otherwise move the external declarations to suitable header
files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
watermark_boost_factor_sysctl_handler is just a pointless wrapper for
proc_dointvec_minmax, so remove it and use proc_dointvec_minmax
directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Since commit 5bbe3547aa3ba ("mm: allow compaction of unevictable pages")
it is allowed to examine mlocked pages and compact them by default. On
-RT even minor pagefaults are problematic because it may take a few 100us
to resolve them and until then the task is blocked.
Make compact_unevictable_allowed = 0 default and issue a warning on RT if
it is changed.
[bigeasy@linutronix.de: v5]
Link: https://lore.kernel.org/linux-mm/20190710144138.qyn4tuttdq6h7kqx@linutronix.de/
Link: http://lkml.kernel.org/r/20200319165536.ovi75tsr2seared4@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/linux-mm/20190710144138.qyn4tuttdq6h7kqx@linutronix.de/
Link: http://lkml.kernel.org/r/20200303202225.nhqc3v5gwlb7x6et@linutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The proc file `compact_unevictable_allowed' should allow 0 and 1 only, the
`extra*' attribues have been set properly but without
proc_dointvec_minmax() as the `proc_handler' the limit will not be
enforced.
Use proc_dointvec_minmax() as the `proc_handler' to enfoce the valid
specified range.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: http://lkml.kernel.org/r/20200303202054.gsosv7fsx2ma3cic@linutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Many embedded boards have a disconnected TTL level serial which can
generate some garbage that can lead to spurious false sysrq detects.
Currently, sysrq can be either completely disabled for serial console
or always disabled (with CONFIG_MAGIC_SYSRQ_SERIAL), since
commit 732dbf3a6104 ("serial: do not accept sysrq characters via serial port")
At Arista, we have such boards that can generate BREAK and random
garbage. While disabling sysrq for serial console would solve
the problem with spurious false sysrq triggers, it's also desirable
to have a way to enable sysrq back.
Having the way to enable sysrq was beneficial to debug lockups with
a manual investigation in field and on the other side preventing false
sysrq detections.
As a preparation to add sysrq_toggle_support() call into uart,
remove a private copy of sysrq_enabled from sysctl - it should reflect
the actual status of sysrq.
Furthermore, the private copy isn't correct already in case
sysrq_always_enabled is true. So, remove __sysrq_enabled and use a
getter-helper sysrq_mask() to check sysrq_key_op enabled status.
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20200302175135.269397-2-dima@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
s390 math emulation was removed with commit 5a79859ae0f3 ("s390:
remove 31 bit support"), rendering ieee_emulation_warnings useless.
The code still built because it was protected by CONFIG_MATHEMU, which
was no longer selectable.
This patch removes the sysctl_ieee_emulation_warnings declaration and
the sysctl entry declaration.
Link: https://lkml.kernel.org/r/20200214172628.3598516-1-steve@sk2.org
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Currently PREEMPT_RCU and TREE_RCU are mutually exclusive Kconfig
options. But PREEMPT_RCU actually specifies a kind of TREE_RCU,
namely a preemptible TREE_RCU. This commit therefore makes PREEMPT_RCU
be a modifer to the TREE_RCU Kconfig option. This has the benefit of
simplifying several of the #if expressions that formerly needed to
check both, but now need only check one or the other.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, the drop_caches proc file and sysctl read back the last value
written, suggesting this is somehow a stateful setting instead of a
one-time command. Make it write-only, like e.g. compact_memory.
While mitigating a VM problem at scale in our fleet, there was confusion
about whether writing to this file will permanently switch the kernel into
a non-caching mode. This influences the decision making in a tense
situation, where tens of people are trying to fix tens of thousands of
affected machines: Do we need a rollback strategy? What are the
performance implications of operating in a non-caching state for several
days? It also caused confusion when the kernel team said we may need to
write the file several times to make sure it's effective ("But it already
reads back 3?").
Link: http://lkml.kernel.org/r/20191031221602.9375-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
arm64 handles top-down mmap layout in a way that can be easily reused by
other architectures, so make it available in mm. It then introduces a new
config ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT that can be set by other
architectures to benefit from those functions. Note that this new config
depends on MMU being enabled, if selected without MMU support, a warning
will be thrown.
Link: http://lkml.kernel.org/r/20190730055113.23635-5-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: James Hogan <jhogan@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range. This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.
On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.
The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:
$ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
248
Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.
This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:
# scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
Data old new delta
sysctl_vals - 12 +12
__kstrtab_sysctl_vals - 12 +12
max 14 10 -4
int_max 16 - -16
one 68 - -68
zero 128 28 -100
Total: Before=20583249, After=20583085, chg -0.00%
[mcroce@redhat.com: tipc: remove two unused variables]
Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
fix lenght to length
Link: http://lkml.kernel.org/r/20190521050937.4370-1-houweitaoo@gmail.com
Signed-off-by: Weitao Hou <houweitaoo@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Tasks without a user-defined clamp value are considered not clamped
and by default their utilization can have any value in the
[0..SCHED_CAPACITY_SCALE] range.
Tasks with a user-defined clamp value are allowed to request any value
in that range, and the required clamp is unconditionally enforced.
However, a "System Management Software" could be interested in limiting
the range of clamp values allowed for all tasks.
Add a privileged interface to define a system default configuration via:
/proc/sys/kernel/sched_uclamp_util_{min,max}
which works as an unconditional clamp range restriction for all tasks.
With the default configuration, the full SCHED_CAPACITY_SCALE range of
values is allowed for each clamp index. Otherwise, the task-specific
clamp is capped by the corresponding system default value.
Do that by tracking, for each task, the "effective" clamp value and
bucket the task has been refcounted in at enqueue time. This
allows to lazy aggregate "requested" and "system default" values at
enqueue time and simplifies refcounting updates at dequeue time.
The cached bucket ids are used to avoid (relatively) more expensive
integer divisions every time a task is enqueued.
An active flag is used to report when the "effective" value is valid and
thus the task is actually refcounted in the corresponding rq's bucket.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-5-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Convert proc_dointvec_minmax_bpf_stats() into a more generic
helper, since we are going to use jump labels more often.
Note that sysctl_bpf_stats_enabled is removed, since
it is no longer needed/used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Today, proc_do_large_bitmap() truncates a large write input buffer to
PAGE_SIZE - 1, which may result in misparsed numbers at the (truncated)
end of the buffer. Further, it fails to notify the caller that the
buffer was truncated, so it doesn't get called iteratively to finish the
entire input buffer.
Tell the caller if there's more work to do by adding the skipped amount
back to left/*lenp before returning.
To fix the misparsing, reset the position if we have completely consumed
a truncated buffer (or if just one char is left, which may be a "-" in a
range), and ask the caller to come back for more.
Link: http://lkml.kernel.org/r/20190320222831.8243-7-mcgrof@kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently when userspace gives us a values that overflow e.g. file-max
and other callers of __do_proc_doulongvec_minmax() we simply ignore the
new value and leave the current value untouched.
This can be problematic as it gives the illusion that the limit has
indeed be bumped when in fact it failed. This commit makes sure to
return EINVAL when an overflow is detected. Please note that this is a
userspace facing change.
Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Link: http://lkml.kernel.org/r/20190304094037.57756-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Userfaultfd can be misued to make it easier to exploit existing
use-after-free (and similar) bugs that might otherwise only make a
short window or race condition available. By using userfaultfd to
stall a kernel thread, a malicious program can keep some state that it
wrote, stable for an extended period, which it can then access using an
existing exploit. While it doesn't cause the exploit itself, and while
it's not the only thing that can stall a kernel thread when accessing a
memory location, it's one of the few that never needs privilege.
We can add a flag, allowing userfaultfd to be restricted, so that in
general it won't be useable by arbitrary user programs, but in
environments that require userfaultfd it can be turned back on.
Add a global sysctl knob "vm.unprivileged_userfaultfd" to control
whether userfaultfd is allowed by unprivileged users. When this is
set to zero, only privileged users (root user, or users with the
CAP_SYS_PTRACE capability) will be able to use the userfaultfd
syscalls.
Andrea said:
: The only difference between the bpf sysctl and the userfaultfd sysctl
: this way is that the bpf sysctl adds the CAP_SYS_ADMIN capability
: requirement, while userfaultfd adds the CAP_SYS_PTRACE requirement,
: because the userfaultfd monitor is more likely to need CAP_SYS_PTRACE
: already if it's doing other kind of tracking on processes runtime, in
: addition of userfaultfd. In other words both syscalls works only for
: root, when the two sysctl are opt-in set to 1.
[dgilbert@redhat.com: changelog additions]
[akpm@linux-foundation.org: documentation tweak, per Mike]
Link: http://lkml.kernel.org/r/20190319030722.12441-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To make ICMPv6 closer to ICMPv4, add ratemask parameter. Since the ICMP
message types use larger numeric values, a simple bitmask doesn't fit.
I use large bitmap. The input and output are the in form of list of
ranges. Set the default to rate limit all error messages but Packet Too
Big. For Packet Too Big, use ratemask instead of hard-coded.
There are functions where icmpv6_xrlim_allow() and icmpv6_global_allow()
aren't called. This patch only adds them to icmpv6_echo_reply().
Rate limiting error messages is mandated by RFC 4443 but RFC 4890 says
that it is also acceptable to rate limit informational messages. Thus,
I removed the current hard-coded behavior of icmpv6_mask_allow() that
doesn't rate limit informational messages.
v2: Add dummy function proc_do_large_bitmap() if CONFIG_PROC_SYSCTL
isn't defined, expand the description in ip-sysctl.txt and remove
unnecessary conditional before kfree().
v3: Inline the bitmap instead of dynamically allocated. Still is a
pointer to it is needed because of the way proc_do_large_bitmap work.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 32a5ad9c2285 ("sysctl: handle overflow for file-max") hooked up
min/max values for the file-max sysctl parameter via the .extra1 and
.extra2 fields in the corresponding struct ctl_table entry.
Unfortunately, the minimum value points at the global 'zero' variable,
which is an int. This results in a KASAN splat when accessed as a long
by proc_doulongvec_minmax on 64-bit architectures:
| BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0
| Read of size 8 at addr ffff2000133d1c20 by task systemd/1
|
| CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x0/0x228
| show_stack+0x14/0x20
| dump_stack+0xe8/0x124
| print_address_description+0x60/0x258
| kasan_report+0x140/0x1a0
| __asan_report_load8_noabort+0x18/0x20
| __do_proc_doulongvec_minmax+0x5d8/0x6a0
| proc_doulongvec_minmax+0x4c/0x78
| proc_sys_call_handler.isra.19+0x144/0x1d8
| proc_sys_write+0x34/0x58
| __vfs_write+0x54/0xe8
| vfs_write+0x124/0x3c0
| ksys_write+0xbc/0x168
| __arm64_sys_write+0x68/0x98
| el0_svc_common+0x100/0x258
| el0_svc_handler+0x48/0xc0
| el0_svc+0x8/0xc
|
| The buggy address belongs to the variable:
| zero+0x0/0x40
|
| Memory state around the buggy address:
| ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa
| ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa
| >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
| ^
| ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00
| ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fix the splat by introducing a unsigned long 'zero_ul' and using that
instead.
Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com
Fixes: 32a5ad9c2285 ("sysctl: handle overflow for file-max")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Christian Brauner <christian@brauner.io>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_proc_do[u]intvec_minmax_conv() had included open-coded versions of
do_proc_do[u]intvec_conv(); the duplication led to buggy inconsistencies
(missing range checks). To reduce the likelihood of such problems in the
future, we can instead refactor both to be defined in terms of their
non-bounded counterparts (plus the added check).
Link: http://lkml.kernel.org/r/20190207165138.5oud57vq4ozwb4kh@hatter.bewilderbeest.net
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This bug has apparently existed since the introduction of this function
in the pre-git era (4500e91754d3 in Thomas Gleixner's history.git,
"[NET]: Add proc_dointvec_userhz_jiffies, use it for proper handling of
neighbour sysctls.").
As a minimal fix we can simply duplicate the corresponding check in
do_proc_dointvec_conv().
Link: http://lkml.kernel.org/r/20190207123426.9202-3-zev@bewilderbeest.net
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: <stable@vger.kernel.org> [2.6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
"First batch of fixes in the new merge window:
1) Double dst_cache free in act_tunnel_key, from Wenxu.
2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the
ip_route_input_rcu() path, from Paolo Abeni.
3) Fix appletalk compile regression, from Arnd Bergmann.
4) If SLAB objects reach the TCP sendpage method we are in serious
trouble, so put a debugging check there. From Vasily Averin.
5) Memory leak in hsr layer, from Mao Wenan.
6) Only test GSO type on GSO packets, from Willem de Bruijn.
7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet.
8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe.
9) Fix race in ipv4 route exception handling, from Xin Long.
10) Missing DMA memory barrier in hns3 driver, from Jian Shen.
11) Use after free in __tcf_chain_put(), from Vlad Buslov.
12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault.
13) Return value correction when ip_mc_may_pull() fails, from Eric
Dumazet.
14) Use after free in x25_device_event(), also from Eric"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
gro_cells: make sure device is up in gro_cells_receive()
vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
net/x25: fix use-after-free in x25_device_event()
isdn: mISDNinfineon: fix potential NULL pointer dereference
net: hns3: fix to stop multiple HNS reset due to the AER changes
ip: fix ip_mc_may_pull() return value
net: keep refcount warning in reqsk_free()
net: stmmac: Avoid one more sometimes uninitialized Clang warning
net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports
rxrpc: Fix client call queueing, waiting for channel
tcp: handle inet_csk_reqsk_queue_add() failures
net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry
8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC
fou, fou6: avoid uninit-value in gue_err() and gue6_err()
net: sched: fix potential use-after-free in __tcf_chain_put()
vhost: silence an unused-variable warning
vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
connector: fix unsafe usage of ->real_parent
vxlan: do not need BH again in vxlan_cleanup()
net: hns3: add dma_rmb() for rx description
...
|
|
Currently, when writing
echo 18446744073709551616 > /proc/sys/fs/file-max
/proc/sys/fs/file-max will overflow and be set to 0. That quickly
crashes the system.
This commit sets the max and min value for file-max. The max value is
set to long int. Any higher value cannot currently be used as the
percpu counters are long ints and not unsigned integers.
Note that the file-max value is ultimately parsed via
__do_proc_doulongvec_minmax(). This function does not report error when
min or max are exceeded. Which means if a value largen that long int is
written userspace will not receive an error instead the old value will be
kept. There is an argument to be made that this should be changed and
__do_proc_doulongvec_minmax() should return an error when a dedicated min
or max value are exceeded. However this has the potential to break
userspace so let's defer this to an RFC patch.
Link: http://lkml.kernel.org/r/20190107222700.15954-3-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Waiman Long <longman@redhat.com>
[christian@brauner.io: v4]
Link: http://lkml.kernel.org/r/20190210203943.8227-3-christian@brauner.io
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
proc_get_long() is a funny function. It uses simple_strtoul() and for a
good reason. proc_get_long() wants to always succeed the parse and
return the maybe incorrect value and the trailing characters to check
against a pre-defined list of acceptable trailing values. However,
simple_strtoul() explicitly ignores overflows which can cause funny
things like the following to happen:
echo 18446744073709551616 > /proc/sys/fs/file-max
cat /proc/sys/fs/file-max
0
(Which will cause your system to silently die behind your back.)
On the other hand kstrtoul() does do overflow detection but does not
return the trailing characters, and also fails the parse when anything
other than '\n' is a trailing character whereas proc_get_long() wants to
be more lenient.
Now, before adding another kstrtoul() function let's simply add a static
parse strtoul_lenient() which:
- fails on overflow with -ERANGE
- returns the trailing characters to the caller
The reason why we should fail on ERANGE is that we already do a partial
fail on overflow right now. Namely, when the TMPBUFLEN is exceeded. So
we already reject values such as 184467440737095516160 (21 chars) but
accept values such as 18446744073709551616 (20 chars) but both are
overflows. So we should just always reject 64bit overflows and not
special-case this based on the number of chars.
Link: http://lkml.kernel.org/r/20190107222700.15954-2-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When CONFIG_BPF_SYSCALL or CONFIG_SYSCTL is disabled, we get
a warning about an unused function:
kernel/sysctl.c:3331:12: error: 'proc_dointvec_minmax_bpf_stats' defined but not used [-Werror=unused-function]
static int proc_dointvec_minmax_bpf_stats(struct ctl_table *table, int write,
The CONFIG_BPF_SYSCALL check was already handled, but the SYSCTL check
is needed on top.
Fixes: 492ecee892c2 ("bpf: enable program stats")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian Brauner <christian@brauner.io>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Merge misc updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits)
tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include
proc: more robust bulk read test
proc: test /proc/*/maps, smaps, smaps_rollup, statm
proc: use seq_puts() everywhere
proc: read kernel cpu stat pointer once
proc: remove unused argument in proc_pid_lookup()
fs/proc/thread_self.c: code cleanup for proc_setup_thread_self()
fs/proc/self.c: code cleanup for proc_setup_self()
proc: return exit code 4 for skipped tests
mm,mremap: bail out earlier in mremap_to under map pressure
mm/sparse: fix a bad comparison
mm/memory.c: do_fault: avoid usage of stale vm_area_struct
writeback: fix inode cgroup switching comment
mm/huge_memory.c: fix "orig_pud" set but not used
mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC
mm/memcontrol.c: fix bad line in comment
mm/cma.c: cma_declare_contiguous: correct err handling
mm/page_ext.c: fix an imbalance with kmemleak
mm/compaction: pass pgdat to too_many_isolated() instead of zone
mm: remove zone_lru_lock() function, access ->lru_lock directly
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- refcount conversions
- Solve the rq->leaf_cfs_rq_list can of worms for real.
- improve power-aware scheduling
- add sysctl knob for Energy Aware Scheduling
- documentation updates
- misc other changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
kthread: Do not use TIMER_IRQSAFE
kthread: Convert worker lock to raw spinlock
sched/fair: Use non-atomic cpumask_{set,clear}_cpu()
sched/fair: Remove unused 'sd' parameter from select_idle_smt()
sched/wait: Use freezable_schedule() when possible
sched/fair: Prune, fix and simplify the nohz_balancer_kick() comment block
sched/fair: Explain LLC nohz kick condition
sched/fair: Simplify nohz_balancer_kick()
sched/topology: Fix percpu data types in struct sd_data & struct s_data
sched/fair: Simplify post_init_entity_util_avg() by calling it with a task_struct pointer argument
sched/fair: Fix O(nr_cgroups) in the load balancing path
sched/fair: Optimize update_blocked_averages()
sched/fair: Fix insertion in rq->leaf_cfs_rq_list
sched/fair: Add tmp_alone_branch assertion
sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock()
sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK
sched/pelt: Skip updating util_est when utilization is higher than CPU's capacity
sched/fair: Update scale invariance of PELT
sched/fair: Move the rq_of() helper function
sched/core: Convert task_struct.stack_refcount to refcount_t
...
|
