summaryrefslogtreecommitdiffstats
path: root/kernel/smp.c
AgeCommit message (Collapse)AuthorFilesLines
2016-10-26kernel/smp: Tell the user we're bringing up secondary CPUsMichael Ellerman1-0/+2
Currently we don't print anything before starting to bring up secondary CPUs. This can be confusing if it takes a long time to bring up the secondaries, or if the kernel crashes while doing so and produces no further output. On x86 they work around this by detecting when the first secondary CPU comes up and printing a message (see announce_cpu()). But doing it in smp_init() is simpler and works for all arches. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: akpm@osdl.org Cc: jgross@suse.com Cc: ak@linux.intel.com Cc: tim.c.chen@linux.intel.com Cc: len.brown@intel.com Cc: peterz@infradead.org Cc: richard@nod.at Cc: jolsa@redhat.com Cc: boris.ostrovsky@oracle.com Cc: mgorman@techsingularity.net Link: http://lkml.kernel.org/r/1477460275-8266-3-git-send-email-mpe@ellerman.id.au Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26kernel/smp: Make the SMP boot message common on all archesMichael Ellerman1-6/+7
Currently after bringing up secondary CPUs all arches print "Brought up %d CPUs". On x86 they also print the number of nodes that were brought online. It would be nice to also print the number of nodes on other arches. Although we could override smp_announce() on the other ~10 NUMA aware arches, it seems simpler to just always print the number of nodes. On non-NUMA arches there is just always 1 node. Having done that, smp_announce() is no longer weak, and seems small enough to just pull directly into smp_init(). Also update the printing of "%d CPUs" to be smart when an SMP kernel is booted on a single CPU system, or when only one CPU is available, eg: smp: Brought up 2 nodes, 1 CPU Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: akpm@osdl.org Cc: jgross@suse.com Cc: ak@linux.intel.com Cc: tim.c.chen@linux.intel.com Cc: len.brown@intel.com Cc: peterz@infradead.org Cc: richard@nod.at Cc: jolsa@redhat.com Cc: boris.ostrovsky@oracle.com Cc: mgorman@techsingularity.net Link: http://lkml.kernel.org/r/1477460275-8266-2-git-send-email-mpe@ellerman.id.au Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26kernel/smp: Define pr_fmt() for smp.cMichael Ellerman1-0/+3
This makes all our pr_xxx()'s start with "smp: ", which helps pin down where they come from and generally looks nice. There is actually only one pr_xxx() use in smp.c at the moment, but we will add some more in the next commit. Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: akpm@osdl.org Cc: jgross@suse.com Cc: ak@linux.intel.com Cc: tim.c.chen@linux.intel.com Cc: len.brown@intel.com Cc: peterz@infradead.org Cc: richard@nod.at Cc: jolsa@redhat.com Cc: boris.ostrovsky@oracle.com Cc: mgorman@techsingularity.net Link: http://lkml.kernel.org/r/1477460275-8266-1-git-send-email-mpe@ellerman.id.au Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-22smp: Allocate smp_call_on_cpu() workqueue on stack tooPeter Zijlstra1-1/+2
The SMP IPI struct descriptor is allocated on the stack except for the workqueue and lockdep complains: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 110 Comm: kworker/0:1 Not tainted 4.8.0-rc5+ #14 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A13 05/11/2014 Workqueue: events smp_call_on_cpu_callback ... Call Trace: dump_stack register_lock_class ? __lock_acquire __lock_acquire ? __lock_acquire lock_acquire ? process_one_work process_one_work ? process_one_work worker_thread ? process_one_work ? process_one_work kthread ? kthread_create_on_node ret_from_fork So allocate it on the stack too. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> [ Test and write commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160911084323.jhtnpb4b37t5tlno@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-05smp: Add function to execute a function synchronously on a CPUJuergen Gross1-0/+50
On some hardware models (e.g. Dell Studio 1555 laptop) some hardware related functions (e.g. SMIs) are to be executed on physical CPU 0 only. Instead of open coding such a functionality multiple times in the kernel add a service function for this purpose. This will enable the possibility to take special measures in virtualized environments like Xen, too. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Douglas_Warzecha@dell.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akataria@vmware.com Cc: boris.ostrovsky@oracle.com Cc: chrisw@sous-sol.org Cc: david.vrabel@citrix.com Cc: hpa@zytor.com Cc: jdelvare@suse.com Cc: jeremy@goop.org Cc: linux@roeck-us.net Cc: pali.rohar@gmail.com Cc: rusty@rustcorp.com.au Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1472453327-19050-4-git-send-email-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-05virt, sched: Add generic vCPU pinning supportJuergen Gross1-0/+1
Add generic virtualization support for pinning the current vCPU to a specified physical CPU. As this operation isn't performance critical (a very limited set of operations like BIOS calls and SMIs is expected to need this) just add a hypervisor specific indirection. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Douglas_Warzecha@dell.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akataria@vmware.com Cc: boris.ostrovsky@oracle.com Cc: chrisw@sous-sol.org Cc: david.vrabel@citrix.com Cc: hpa@zytor.com Cc: jdelvare@suse.com Cc: jeremy@goop.org Cc: linux@roeck-us.net Cc: pali.rohar@gmail.com Cc: rusty@rustcorp.com.au Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1472453327-19050-3-git-send-email-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-29Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-47/+32
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug updates from Thomas Gleixner: "This is the next part of the hotplug rework. - Convert all notifiers with a priority assigned - Convert all CPU_STARTING/DYING notifiers The final removal of the STARTING/DYING infrastructure will happen when the merge window closes. Another 700 hundred line of unpenetrable maze gone :)" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) timers/core: Correct callback order during CPU hot plug leds/trigger/cpu: Move from CPU_STARTING to ONLINE level powerpc/numa: Convert to hotplug state machine arm/perf: Fix hotplug state machine conversion irqchip/armada: Avoid unused function warnings ARC/time: Convert to hotplug state machine clocksource/atlas7: Convert to hotplug state machine clocksource/armada-370-xp: Convert to hotplug state machine clocksource/exynos_mct: Convert to hotplug state machine clocksource/arm_global_timer: Convert to hotplug state machine rcu: Convert rcutree to hotplug state machine KVM/arm/arm64/vgic-new: Convert to hotplug state machine smp/cfd: Convert core to hotplug state machine x86/x2apic: Convert to CPU hotplug state machine profile: Convert to hotplug state machine timers/core: Convert to hotplug state machine hrtimer: Convert to hotplug state machine x86/tboot: Convert to hotplug state machine arm64/armv8 deprecated: Convert to hotplug state machine hwtracing/coresight-etm4x: Convert to hotplug state machine ...
2016-07-15smp/cfd: Convert core to hotplug state machineRichard Weinberger1-47/+32
Install the callbacks via the state machine. They are installed at runtime so smpcfd_prepare_cpu() needs to be invoked by the boot-CPU. Signed-off-by: Richard Weinberger <richard@nod.at> [ Added the dropped CPU dying case back in. ] Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Davidlohr Bueso <dave@stgolabs> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153337.818376366@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-14locking/barriers: Replace smp_cond_acquire() with smp_cond_load_acquire()Peter Zijlstra1-1/+1
This new form allows using hardware assisted waiting. Some hardware (ARM64 and x86) allow monitoring an address for changes, so by providing a pointer we can use this to replace the cpu_relax() with hardware optimized methods in the future. Requested-by: Will Deacon <will.deacon@arm.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-15Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cpu hotplug updates from Thomas Gleixner: "This is the first part of the ongoing cpu hotplug rework: - Initial implementation of the state machine - Runs all online and prepare down callbacks on the plugged cpu and not on some random processor - Replaces busy loop waiting with completions - Adds tracepoints so the states can be followed" More detailed commentary on this work from an earlier email: "What's wrong with the current cpu hotplug infrastructure? - Asymmetry The hotplug notifier mechanism is asymmetric versus the bringup and teardown. This is mostly caused by the notifier mechanism. - Largely undocumented dependencies While some notifiers use explicitely defined notifier priorities, we have quite some notifiers which use numerical priorities to express dependencies without any documentation why. - Control processor driven Most of the bringup/teardown of a cpu is driven by a control processor. While it is understandable, that preperatory steps, like idle thread creation, memory allocation for and initialization of essential facilities needs to be done before a cpu can boot, there is no reason why everything else must run on a control processor. Before this patch series, bringup looks like this: Control CPU Booting CPU do preparatory steps kick cpu into life do low level init sync with booting cpu sync with control cpu bring the rest up - All or nothing approach There is no way to do partial bringups. That's something which is really desired because we waste e.g. at boot substantial amount of time just busy waiting that the cpu comes to life. That's stupid as we could very well do preparatory steps and the initial IPI for other cpus and then go back and do the necessary low level synchronization with the freshly booted cpu. - Minimal debuggability Due to the notifier based design, it's impossible to switch between two stages of the bringup/teardown back and forth in order to test the correctness. So in many hotplug notifiers the cancel mechanisms are either not existant or completely untested. - Notifier [un]registering is tedious To [un]register notifiers we need to protect against hotplug at every callsite. There is no mechanism that bringup/teardown callbacks are issued on the online cpus, so every caller needs to do it itself. That also includes error rollback. What's the new design? The base of the new design is a symmetric state machine, where both the control processor and the booting/dying cpu execute a well defined set of states. Each state is symmetric in the end, except for some well defined exceptions, and the bringup/teardown can be stopped and reversed at almost all states. So the bringup of a cpu will look like this in the future: Control CPU Booting CPU do preparatory steps kick cpu into life do low level init sync with booting cpu sync with control cpu bring itself up The synchronization step does not require the control cpu to wait. That mechanism can be done asynchronously via a worker or some other mechanism. The teardown can be made very similar, so that the dying cpu cleans up and brings itself down. Cleanups which need to be done after the cpu is gone, can be scheduled asynchronously as well. There is a long way to this, as we need to refactor the notion when a cpu is available. Today we set the cpu online right after it comes out of the low level bringup, which is not really correct. The proper mechanism is to set it to available, i.e. cpu local threads, like softirqd, hotplug thread etc. can be scheduled on that cpu, and once it finished all booting steps, it's set to online, so general workloads can be scheduled on it. The reverse happens on teardown. First thing to do is to forbid scheduling of general workloads, then teardown all the per cpu resources and finally shut it off completely. This patch series implements the basic infrastructure for this at the core level. This includes the following: - Basic state machine implementation with well defined states, so ordering and prioritization can be expressed. - Interfaces to [un]register state callbacks This invokes the bringup/teardown callback on all online cpus with the proper protection in place and [un]installs the callbacks in the state machine array. For callbacks which have no particular ordering requirement we have a dynamic state space, so that drivers don't have to register an explicit hotplug state. If a callback fails, the code automatically does a rollback to the previous state. - Sysfs interface to drive the state machine to a particular step. This is only partially functional today. Full functionality and therefor testability will be achieved once we converted all existing hotplug notifiers over to the new scheme. - Run all CPU_ONLINE/DOWN_PREPARE notifiers on the booting/dying processor: Control CPU Booting CPU do preparatory steps kick cpu into life do low level init sync with booting cpu sync with control cpu wait for boot bring itself up Signal completion to control cpu In a previous step of this work we've done a full tree mechanical conversion of all hotplug notifiers to the new scheme. The balance is a net removal of about 4000 lines of code. This is not included in this series, as we decided to take a different approach. Instead of mechanically converting everything over, we will do a proper overhaul of the usage sites one by one so they nicely fit into the symmetric callback scheme. I decided to do that after I looked at the ugliness of some of the converted sites and figured out that their hotplug mechanism is completely buggered anyway. So there is no point to do a mechanical conversion first as we need to go through the usage sites one by one again in order to achieve a full symmetric and testable behaviour" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) cpu/hotplug: Document states better cpu/hotplug: Fix smpboot thread ordering cpu/hotplug: Remove redundant state check cpu/hotplug: Plug death reporting race rcu: Make CPU_DYING_IDLE an explicit call cpu/hotplug: Make wait for dead cpu completion based cpu/hotplug: Let upcoming cpu bring itself fully up arch/hotplug: Call into idle with a proper state cpu/hotplug: Move online calls to hotplugged cpu cpu/hotplug: Create hotplug threads cpu/hotplug: Split out the state walk into functions cpu/hotplug: Unpark smpboot threads from the state machine cpu/hotplug: Move scheduler cpu_online notifier to hotplug core cpu/hotplug: Implement setup/removal interface cpu/hotplug: Make target state writeable cpu/hotplug: Add sysfs state interface cpu/hotplug: Hand in target state to _cpu_up/down cpu/hotplug: Convert the hotplugged cpu work to a state machine cpu/hotplug: Convert to a state machine for the control processor cpu/hotplug: Add tracepoints ...
2016-03-10locking/csd_lock: Use smp_cond_acquire() in csd_lock_wait()Davidlohr Bueso1-2/+1
We can micro-optimize this call and mildly relax the barrier requirements by relying on ctrl + rmb, keeping the acquire semantics. In addition, this is pretty much the now standard for busy-waiting under such restraints. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Link: http://lkml.kernel.org/r/1457574936-19065-3-git-send-email-dbueso@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-10locking/csd_lock: Explicitly inline csd_lock*() helpersDavidlohr Bueso1-3/+3
While the compiler tends to already to it for us (except for csd_unlock), make it explicit. These helpers mainly deal with the ->flags, are short-lived and can be called, for example, from smp_call_function_many(). Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Link: http://lkml.kernel.org/r/1457574936-19065-2-git-send-email-dbueso@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-01cpu/hotplug: Create hotplug threadsThomas Gleixner1-0/+1
In order to let the hotplugged cpu take care of the setup/teardown, we need a seperate hotplug thread. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.454541272@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-06mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman1-1/+1
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-19smp: Fix error case handling in smp_call_function_*()Linus Torvalds1-1/+3
Commit 8053871d0f7f ("smp: Fix smp_call_function_single_async() locking") fixed the locking for the asynchronous smp-call case, but in the process of moving the lock handling around, one of the error cases ended up not unlocking the call data at all. This went unnoticed on x86, because this is a "caller is buggy" case, where the caller is trying to call a non-existent CPU. But apparently ARM does that (at least under qemu-arm). Bindly doing cross-cpu calls to random CPU's that aren't even online seems a bit fishy, but the error handling was clearly not correct. Simply add the missing "csd_unlock()" to the error path. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Analyzed-by: Rabin Vincent <rabin@rab.in> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17smp: Fix smp_call_function_single_async() lockingLinus Torvalds1-31/+47
The current smp_function_call code suffers a number of problems, most notably smp_call_function_single_async() is broken. The problem is that flush_smp_call_function_queue() does csd_unlock() _after_ calling csd->func(). This means that a caller cannot properly synchronize the csd usage as it has to. Change the code to release the csd before calling ->func() for the async case, and put a WARN_ON_ONCE(csd->flags & CSD_FLAG_LOCK) in smp_call_function_single_async() to warn us of improper serialization, because any waiting there can results in deadlocks when called with IRQs disabled. Rename the (currently) unused WAIT flag to SYNCHRONOUS and (re)use it such that we know what to do in flush_smp_call_function_queue(). Rework csd_{,un}lock() to use smp_load_acquire() / smp_store_release() to avoid some full barriers while more clearly providing lock semantics. Finally move the csd maintenance out of generic_exec_single() into its callers for clearer code. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ Added changelog. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Rafael David Tinoco <inaddy@ubuntu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CA+55aFz492bzLFhdbKN-Hygjcreup7CjMEYk3nTSfRWjppz-OA@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-15Merge branch 'for-3.18-consistent-ops' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-09-19smp: Add new wake_up_all_idle_cpus() functionChuansheng Liu1-0/+22
Currently kick_all_cpus_sync() can break non-polling idle cpus thru IPI interrupts. But sometimes we need to break the polling idle cpus immediately to reselect the suitable c-state, also for non-idle cpus, we need to do nothing if we try to wake up them. Here adding one new function wake_up_all_idle_cpus() to let all cpus out of idle based on function wake_up_if_idle(). Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: daniel.lezcano@linaro.org Cc: rjw@rjwysocki.net Cc: linux-pm@vger.kernel.org Cc: changcheng.liu@intel.com Cc: xiaoming.wang@intel.com Cc: souvik.k.chakravarty@intel.com Cc: luto@amacapital.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1409815075-4180-2-git-send-email-chuansheng.liu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-26kernel misc: Replace __get_cpu_var usesChristoph Lameter1-3/+3
Replace uses of __get_cpu_var for address calculation with this_cpu_ptr. Cc: akpm@linux-foundation.org Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-06kernel/smp.c:on_each_cpu_cond(): fix warning in fallback pathSasha Levin1-1/+1
The rarely-executed memry-allocation-failed callback path generates a WARN_ON_ONCE() when smp_call_function_single() succeeds. Presumably it's supposed to warn on failures. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@gentwo.org> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <htejun@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-16Merge tag 'v3.16-rc5' into sched/core, to refresh the branch before applying ↵Ingo Molnar1-8/+49
bigger tree-wide changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-23CPU hotplug, smp: flush any pending IPI callbacks before CPU offlineSrivatsa S. Bhat1-8/+49
There is a race between the CPU offline code (within stop-machine) and the smp-call-function code, which can lead to getting IPIs on the outgoing CPU, *after* it has gone offline. Specifically, this can happen when using smp_call_function_single_async() to send the IPI, since this API allows sending asynchronous IPIs from IRQ disabled contexts. The exact race condition is described below. During CPU offline, in stop-machine, we don't enforce any rule in the _DISABLE_IRQ stage, regarding the order in which the outgoing CPU and the other CPUs disable their local interrupts. Due to this, we can encounter a situation in which an IPI is sent by one of the other CPUs to the outgoing CPU (while it is *still* online), but the outgoing CPU ends up noticing it only *after* it has gone offline. CPU 1 CPU 2 (Online CPU) (CPU going offline) Enter _PREPARE stage Enter _PREPARE stage Enter _DISABLE_IRQ stage = Got a device interrupt, and | Didn't notice the IPI the interrupt handler sent an | since interrupts were IPI to CPU 2 using | disabled on this CPU. smp_call_function_single_async() | = Enter _DISABLE_IRQ stage Enter _RUN stage Enter _RUN stage = Busy loop with interrupts | Invoke take_cpu_down() disabled. | and take CPU 2 offline = Enter _EXIT stage Enter _EXIT stage Re-enable interrupts Re-enable interrupts The pending IPI is noted immediately, but alas, the CPU is offline at this point. This of course, makes the smp-call-function IPI handler code running on CPU 2 unhappy and it complains about "receiving an IPI on an offline CPU". One real example of the scenario on CPU 1 is the block layer's complete-request call-path: __blk_complete_request() [interrupt-handler] raise_blk_irq() smp_call_function_single_async() However, if we look closely, the block layer does check that the target CPU is online before firing the IPI. So in this case, it is actually the unfortunate ordering/timing of events in the stop-machine phase that leads to receiving IPIs after the target CPU has gone offline. In reality, getting a late IPI on an offline CPU is not too bad by itself (this can happen even due to hardware latencies in IPI send-receive). It is a bug only if the target CPU really went offline without executing all the callbacks queued on its list. (Note that a CPU is free to execute its pending smp-call-function callbacks in a batch, without waiting for the corresponding IPIs to arrive for each one of those callbacks). So, fixing this issue can be broken up into two parts: 1. Ensure that a CPU goes offline only after executing all the callbacks queued on it. 2. Modify the warning condition in the smp-call-function IPI handler code such that it warns only if an offline CPU got an IPI *and* that CPU had gone offline with callbacks still pending in its queue. Achieving part 1 is straight-forward - just flush (execute) all the queued callbacks on the outgoing CPU in the CPU_DYING stage[1], including those callbacks for which the source CPU's IPIs might not have been received on the outgoing CPU yet. Once we do this, an IPI that arrives late on the CPU going offline (either due to the race mentioned above, or due to hardware latencies) will be completely harmless, since the outgoing CPU would have executed all the queued callbacks before going offline. Overall, this fix (parts 1 and 2 put together) additionally guarantees that we will see a warning only when the *IPI-sender code* is buggy - that is, if it queues the callback _after_ the target CPU has gone offline. [1]. The CPU_DYING part needs a little more explanation: by the time we execute the CPU_DYING notifier callbacks, the CPU would have already been marked offline. But we want to flush out the pending callbacks at this stage, ignoring the fact that the CPU is offline. So restructure the IPI handler code so that we can by-pass the "is-cpu-offline?" check in this particular case. (Of course, the right solution here is to fix CPU hotplug to mark the CPU offline _after_ invoking the CPU_DYING notifiers, but this requires a lot of audit to ensure that this change doesn't break any existing code; hence lets go with the solution proposed above until that is done). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Suggested-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Galbraith <mgalbraith@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-16irq_work: Implement remote queueingFrederic Weisbecker1-0/+9
irq work currently only supports local callbacks. However its code is mostly ready to run remote callbacks and we have some potential user. The full nohz subsystem currently open codes its own remote irq work on top of the scheduler ipi when it wants a CPU to reevaluate its next tick. However this ad hoc solution bloats the scheduler IPI. Lets just extend the irq work subsystem to support remote queuing on top of the generic SMP IPI to handle this kind of user. This shouldn't add noticeable overhead. Suggested-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-06-06smp: print more useful debug info upon receiving IPI on an offline CPUSrivatsa S. Bhat1-3/+15
There is a longstanding problem related to CPU hotplug which causes IPIs to be delivered to offline CPUs, and the smp-call-function IPI handler code prints out a warning whenever this is detected. Every once in a while this (usually harmless) warning gets reported on LKML, but so far it has not been completely fixed. Usually the solution involves finding out the IPI sender and fixing it by adding appropriate synchronization with CPU hotplug. However, while going through one such internal bug reports, I found that there is a significant bug in the receiver side itself (more specifically, in stop-machine) that can lead to this problem even when the sender code is perfectly fine. This patchset fixes that synchronization problem in the CPU hotplug stop-machine code. Patch 1 adds some additional debug code to the smp-call-function framework, to help debug such issues easily. Patch 2 modifies the stop-machine code to ensure that any IPIs that were sent while the target CPU was online, would be noticed and handled by that CPU without fail before it goes offline. Thus, this avoids scenarios where IPIs are received on offline CPUs (as long as the sender uses proper hotplug synchronization). In fact, I debugged the problem by using Patch 1, and found that the payload of the IPI was always the block layer's trigger_softirq() function. But I was not able to find anything wrong with the block layer code. That's when I started looking at the stop-machine code and realized that there is a race-window which makes the IPI _receiver_ the culprit, not the sender. Patch 2 fixes that race and hence this should put an end to most of the hard-to-debug IPI-to-offline-CPU issues. This patch (of 2): Today the smp-call-function code just prints a warning if we get an IPI on an offline CPU. This info is sufficient to let us know that something went wrong, but often it is very hard to debug exactly who sent the IPI and why, from this info alone. In most cases, we get the warning about the IPI to an offline CPU, immediately after the CPU going offline comes out of the stop-machine phase and reenables interrupts. Since all online CPUs participate in stop-machine, the information regarding the sender of the IPI is already lost by the time we exit the stop-machine loop. So even if we dump the stack on each CPU at this point, we won't find anything useful since all of them will show the stack-trace of the stopper thread. So we need a better way to figure out who sent the IPI and why. To achieve this, when we detect an IPI targeted to an offline CPU, loop through the call-single-data linked list and print out the payload (i.e., the name of the function which was supposed to be executed by the target CPU). This would give us an insight as to who might have sent the IPI and help us debug this further. [akpm@linux-foundation.org: correctly suppress warning output on second and later occurrences] Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <mgalbraith@suse.de> Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-24smp: Rename __smp_call_function_single() to smp_call_function_single_async()Frederic Weisbecker1-6/+13
The name __smp_call_function_single() doesn't tell much about the properties of this function, especially when compared to smp_call_function_single(). The comments above the implementation are also misleading. The main point of this function is actually not to be able to embed the csd in an object. This is actually a requirement that result from the purpose of this function which is to raise an IPI asynchronously. As such it can be called with interrupts disabled. And this feature comes at the cost of the caller who then needs to serialize the IPIs on this csd. Lets rename the function and enhance the comments so that they reflect these properties. Suggested-by: Christoph Hellwig <hch@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24smp: Remove wait argument from __smp_call_function_single()Frederic Weisbecker1-15/+4
The main point of calling __smp_call_function_single() is to send an IPI in a pure asynchronous way. By embedding a csd in an object, a caller can send the IPI without waiting for a previous one to complete as is required by smp_call_function_single() for example. As such, sending this kind of IPI can be safe even when irqs are disabled. This flexibility comes at the expense of the caller who then needs to synchronize the csd lifecycle by himself and make sure that IPIs on a single csd are serialized. This is how __smp_call_function_single() works when wait = 0 and this usecase is relevant. Now there don't seem to be any usecase with wait = 1 that can't be covered by smp_call_function_single() instead, which is safer. Lets look at the two possible scenario: 1) The user calls __smp_call_function_single(wait = 1) on a csd embedded in an object. It looks like a nice and convenient pattern at the first sight because we can then retrieve the object from the IPI handler easily. But actually it is a waste of memory space in the object since the csd can be allocated from the stack by smp_call_function_single(wait = 1) and the object can be passed an the IPI argument. Besides that, embedding the csd in an object is more error prone because the caller must take care of the serialization of the IPIs for this csd. 2) The user calls __smp_call_function_single(wait = 1) on a csd that is allocated on the stack. It's ok but smp_call_function_single() can do it as well and it already takes care of the allocation on the stack. Again it's more simple and less error prone. Therefore, using the underscore prepend API version with wait = 1 is a bad pattern and a sign that the caller can do safer and more simple. There was a single user of that which has just been converted. So lets remove this option to discourage further users. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24smp: Move __smp_call_function_single() below its safe versionFrederic Weisbecker1-32/+32
Move this function closer to __smp_call_function_single(). These functions have very similar behavior and should be displayed in the same block for clarity. Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24smp: Consolidate the various smp_call_function_single() declensionsFrederic Weisbecker1-41/+39
__smp_call_function_single() and smp_call_function_single() share some code that can be factorized: execute inline when the target is local, check if the target is online, lock the csd, call generic_exec_single(). Lets move the common parts to generic_exec_single(). Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24smp: Teach __smp_call_function_single() to check for offline cpusJan Kara1-4/+7
Align __smp_call_function_single() with smp_call_function_single() so that it also checks whether requested cpu is still online. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24smp: Iterate functions through llist_for_each_entry_safe()Jan Kara1-9/+3
The IPI function llist iteration is open coded. Lets simplify this with using an llist iterator. Also we want to keep the iteration safe against possible csd.llist->next value reuse from the IPI handler. At least the block subsystem used to do such things so lets stay careful and use llist_for_each_entry_safe(). Signed-off-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-01-30kernel/smp.c: remove cpumask_ipiRoman Gushchin1-16/+1
After commit 9a46ad6d6df3 ("smp: make smp_call_function_many() use logic similar to smp_call_function_single()"), cfd->cpumask is accessed only in smp_call_function_many(). So there is no more need to copy it into cfd->cpumask_ipi before putting csd into the list. The cpumask_ipi field is obsolete and can be removed. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Wang YanQing <udknight@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: Shaohua Li <shli@fusionio.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30kernel: use lockless list for smp_call_function_singleChristoph Hellwig1-38/+13
Make smp_call_function_single and friends more efficient by using a lockless list. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15kernel: fix generic_exec_single indentationChristoph Hellwig1-2/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15kernel: remove CONFIG_USE_GENERIC_SMP_HELPERSChristoph Hellwig1-2/+0
We've switched over every architecture that supports SMP to it, so remove the new useless config variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-14Merge branch 'for-3.13/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+6
Pull block IO core updates from Jens Axboe: "This is the pull request for the core changes in the block layer for 3.13. It contains: - The new blk-mq request interface. This is a new and more scalable queueing model that marries the best part of the request based interface we currently have (which is fully featured, but scales poorly) and the bio based "interface" which the new drivers for high IOPS devices end up using because it's much faster than the request based one. The bio interface has no block layer support, since it taps into the stack much earlier. This means that drivers end up having to implement a lot of functionality on their own, like tagging, timeout handling, requeue, etc. The blk-mq interface provides all these. Some drivers even provide a switch to select bio or rq and has code to handle both, since things like merging only works in the rq model and hence is faster for some workloads. This is a huge mess. Conversion of these drivers nets us a substantial code reduction. Initial results on converting SCSI to this model even shows an 8x improvement on single queue devices. So while the model was intended to work on the newer multiqueue devices, it has substantial improvements for "classic" hardware as well. This code has gone through extensive testing and development, it's now ready to go. A pull request is coming to convert virtio-blk to this model will be will be coming as well, with more drivers scheduled for 3.14 conversion. - Two blktrace fixes from Jan and Chen Gang. - A plug merge fix from Alireza Haghdoost. - Conversion of __get_cpu_var() from Christoph Lameter. - Fix for sector_div() with 64-bit divider from Geert Uytterhoeven. - A fix for a race between request completion and the timeout handling from Jeff Moyer. This is what caused the merge conflict with blk-mq/core, in case you are looking at that. - A dm stacking fix from Mike Snitzer. - A code consolidation fix and duplicated code removal from Kent Overstreet. - A handful of block bug fixes from Mikulas Patocka, fixing a loop crash and memory corruption on blk cg. - Elevator switch bug fix from Tomoki Sekiyama. A heads-up that I had to rebase this branch. Initially the immutable bio_vecs had been queued up for inclusion, but a week later, it became clear that it wasn't fully cooked yet. So the decision was made to pull this out and postpone it until 3.14. It was a straight forward rebase, just pruning out the immutable series and the later fixes of problems with it. The rest of the patches applied directly and no further changes were made" * 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits) block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: Do not call sector_div() with a 64-bit divisor kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup() block: Consolidate duplicated bio_trim() implementations block: Use rw_copy_check_uvector() block: Enable sysfs nomerge control for I/O requests in the plug list block: properly stack underlying max_segment_size to DM device elevator: acquire q->sysfs_lock in elevator_change() elevator: Fix a race in elevator switching and md device initialization block: Replace __get_cpu_var uses bdi: test bdi_init failure block: fix a probe argument to blk_register_region loop: fix crash if blk_alloc_queue fails blk-core: Fix memory corruption if blkcg_init_queue fails block: fix race between request completion and timeout handling blktrace: Send BLK_TN_PROCESS events to all running traces blk-mq: don't disallow request merges for req->special being set blk-mq: mq plug list breakage blk-mq: fix for flush deadlock ...
2013-10-25smp: don't warn about csd->flags having CSD_FLAG_LOCK cleared for !waitJens Axboe1-1/+5
blk-mq reuses the request potentially immediately, since the most cache hot is always given out first. This means that rq->csd could be reused between csd->func() being called and csd_unlock() being called. This isn't a problem, since we never use wait == 1 for the smp call function. Add CSD_FLAG_WAIT to be able to tell the difference, retaining the warning for other cases. Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-25smp: export __smp_call_function_single()Jens Axboe1-0/+1
The blk-mq core and the blk-mq null driver uses it. Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-01x86/boot: Further compress CPUs bootup messageBorislav Petkov1-1/+6
Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.603005] .... node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15 [ 1.200005] .... node #2, CPUs: #16 #17 #18 #19 #20 #21 #22 #23 [ 1.796005] .... node #3, CPUs: #24 #25 #26 #27 #28 #29 #30 #31 [ 2.393005] .... node #4, CPUs: #32 #33 #34 #35 #36 #37 #38 #39 [ 2.996005] .... node #5, CPUs: #40 #41 #42 #43 #44 #45 #46 #47 [ 3.600005] .... node #6, CPUs: #48 #49 #50 #51 #52 #53 #54 #55 [ 4.202005] .... node #7, CPUs: #56 #57 #58 #59 #60 #61 #62 #63 [ 4.811005] .... node #8, CPUs: #64 #65 #66 #67 #68 #69 #70 #71 [ 5.421006] .... node #9, CPUs: #72 #73 #74 #75 #76 #77 #78 #79 [ 6.032005] .... node #10, CPUs: #80 #81 #82 #83 #84 #85 #86 #87 [ 6.648006] .... node #11, CPUs: #88 #89 #90 #91 #92 #93 #94 #95 [ 7.262005] .... node #12, CPUs: #96 #97 #98 #99 #100 #101 #102 #103 [ 7.865005] .... node #13, CPUs: #104 #105 #106 #107 #108 #109 #110 #111 [ 8.466005] .... node #14, CPUs: #112 #113 #114 #115 #116 #117 #118 #119 [ 9.073006] .... node #15, CPUs: #120 #121 #122 #123 #124 #125 #126 #127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-11kernel/smp.c: quit unconditionally enabling irqs in on_each_cpu_mask().David Daney1-4/+7
As in commit f21afc25f9ed ("smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu()"), we don't want to enable irqs if they are not already enabled. I don't know of any bugs currently caused by this unconditional local_irq_enable(), but I want to use this function in MIPS/OCTEON early boot (when we have early_boot_irqs_disabled). This also makes this function have similar semantics to on_each_cpu() which is good in itself. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: Christoph Lameter <cl@linux.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11kernel/smp.c: free related resources when failure occurs in hotplug_cfd()Chen Gang1-1/+4
When failure occurs in hotplug_cfd(), need release related resources, or will cause memory leak. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-04Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-13/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Various optimizations, cleanups and smaller fixes - no major changes in scheduler behavior" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix the sd_parent_degenerate() code sched/fair: Rework and comment the group_imb code sched/fair: Optimize find_busiest_queue() sched/fair: Make group power more consistent sched/fair: Remove duplicate load_per_task computations sched/fair: Shrink sg_lb_stats and play memset games sched: Clean-up struct sd_lb_stat sched: Factor out code to should_we_balance() sched: Remove one division operation in find_busiest_queue() sched/cputime: Use this_cpu_add() in task_group_account_field() cpumask: Fix cpumask leak in partition_sched_domains() sched/x86: Optimize switch_mm() for multi-threaded workloads generic-ipi: Kill unnecessary variable - csd_flags numa: Mark __node_set() as __always_inline sched/fair: Cleanup: remove duplicate variable declaration sched/__wake_up_sync_key(): Fix nr_exclusive tasks which lead to WF_SYNC clearing
2013-08-19generic-ipi/locking: Fix misleading smp_call_function_any() descriptionXie XiuQi1-2/+0
Fix locking description: after commit 8969a5ede0f9e17da4b9437 ("generic-ipi: remove kmalloc()"), wait = 0 can be guaranteed because we don't kmalloc() anymore. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Cc: Sheng Yang <sheng@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Link: http://lkml.kernel.org/r/51F5E6F8.1000801@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-30generic-ipi: Kill unnecessary variable - csd_flagsXie XiuQi1-13/+1
After commit 8969a5ede0f9e17da4b943712429aef2c9bcd82b ("generic-ipi: remove kmalloc()"), wait = 0 can be guaranteed, and all callsites of generic_exec_single() do an unconditional csd_lock() now. So csd_flags is unnecessary now. Remove it. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Link: http://lkml.kernel.org/r/51F72DA1.7010401@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-14kernel: delete __cpuinit usage from all core kernel filesPaul Gortmaker1-1/+1
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the uses of the __cpuinit macros from C files in the core kernel directories (kernel, init, lib, mm, and include) that don't really have a specific maintainer. [1] https://lkml.org/lkml/2013/5/20/589 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-04-30kernel/smp.c: cleanupsAndrew Morton1-45/+46
We sometimes use "struct call_single_data *data" and sometimes "struct call_single_data *csd". Use "csd" consistently. We sometimes use "struct call_function_data *data" and sometimes "struct call_function_data *cfd". Use "cfd" consistently. Also, avoid some 80-col layout tricks. Cc: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Shaohua Li <shli@fusionio.com> Cc: Shaohua Li <shli@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30kernel/smp.c: use '|=' for csd_lockliguang1-1/+1
csd_lock() uses assignment to data->flags rather than |=. That is not buggy at present because only one bit (CSD_FLAG_LOCK) is defined in call_single_data.flags. But it will become buggy if we later add another flag, so fix it now. Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21smp: make smp_call_function_many() use logic similar to ↵Shaohua Li1-153/+30
smp_call_function_single() I'm testing swapout workload in a two-socket Xeon machine. The workload has 10 threads, each thread sequentially accesses separate memory region. TLB flush overhead is very big in the workload. For each page, page reclaim need move it from active lru list and then unmap it. Both need a TLB flush. And this is a multthread workload, TLB flush happens in 10 CPUs. In X86, TLB flush uses generic smp_call)function. So this workload stress smp_call_function_many heavily. Without patch, perf shows: + 24.49% [k] generic_smp_call_function_interrupt - 21.72% [k] _raw_spin_lock - _raw_spin_lock + 79.80% __page_check_address + 6.42% generic_smp_call_function_interrupt + 3.31% get_swap_page + 2.37% free_pcppages_bulk + 1.75% handle_pte_fault + 1.54% put_super + 1.41% grab_super_passive + 1.36% __swap_duplicate + 0.68% blk_flush_plug_list + 0.62% swap_info_get + 6.55% [k] flush_tlb_func + 6.46% [k] smp_call_function_many + 5.09% [k] call_function_interrupt + 4.75% [k] default_send_IPI_mask_sequence_phys + 2.18% [k] find_next_bit swapout throughput is around 1300M/s. With the patch, perf shows: - 27.23% [k] _raw_spin_lock - _raw_spin_lock + 80.53% __page_check_address + 8.39% generic_smp_call_function_single_interrupt + 2.44% get_swap_page + 1.76% free_pcppages_bulk + 1.40% handle_pte_fault + 1.15% __swap_duplicate + 1.05% put_super + 0.98% grab_super_passive + 0.86% blk_flush_plug_list + 0.57% swap_info_get + 8.25% [k] default_send_IPI_mask_sequence_phys + 7.55% [k] call_function_interrupt + 7.47% [k] smp_call_function_many + 7.25% [k] flush_tlb_func + 3.81% [k] _raw_spin_lock_irqsave + 3.78% [k] generic_smp_call_function_single_interrupt swapout throughput is around 1400M/s. So there is around a 7% improvement, and total cpu utilization doesn't change. Without the patch, cfd_data is shared by all CPUs. generic_smp_call_function_interrupt does read/write cfd_data several times which will create a lot of cache ping-pong. With the patch, the data becomes per-cpu. The ping-pong is avoided. And from the perf data, this doesn't make call_single_queue lock contend. Next step is to remove generic_smp_call_function_interrupt() from arch code. Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-28smp: Fix SMP function call empty cpu mask raceWang YanQing1-1/+12
I get the following warning every day with v3.7, once or twice a day: [ 2235.186027] WARNING: at /mnt/sda7/kernel/linux/arch/x86/kernel/apic/ipi.c:109 default_send_IPI_mask_logical+0x2f/0xb8() As explained by Linus as well: | | Once we've done the "list_add_rcu()" to add it to the | queue, we can have (another) IPI to the target CPU that can | now see it and clear the mask. | | So by the time we get to actually send the IPI, the mask might | have been cleared by another IPI. | This patch also fixes a system hang problem, if the data->cpumask gets cleared after passing this point: if (WARN_ONCE(!mask, "empty IPI mask")) return; then the problem in commit 83d349f35e1a ("x86: don't send an IPI to the empty set of CPU's") will happen again. Signed-off-by: Wang YanQing <udknight@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Jan Beulich <jbeulich@suse.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: peterz@infradead.org Cc: mina86@mina86.org Cc: srivatsa.bhat@linux.vnet.ibm.com Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20130126075357.GA3205@udknight [ Tidied up the changelog and the comment in the code. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-05smp: Remove ipi_call_lock[_irq]()/ipi_call_unlock[_irq]()Yong Zhang1-20/+0
There is no user of those APIs anymore, just remove it. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: ralf@linux-mips.org Cc: sshtylyov@mvista.com Cc: david.daney@cavium.com Cc: nikunj@linux.vnet.ibm.com Cc: paulmck@linux.vnet.ibm.com Cc: axboe@kernel.dk Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1338275765-3217-11-git-send-email-yong.zhang0@gmail.com Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-08smp: Implement kick_all_cpus_sync()Thomas Gleixner1-0/+23
Will replace the misnomed cpu_idle_wait() function which is copied a gazillion times all over arch/* Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120507175652.049316594@linutronix.de
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 02:17:11 +0000