summaryrefslogtreecommitdiffstats
path: root/kernel/sched_idletask.c
AgeCommit message (Collapse)AuthorFilesLines
2008-10-22sched: add CONFIG_SMP consistencyLi Zefan1-3/+2
a patch from Henrik Austad did this: >> Do not declare select_task_rq as part of sched_class when CONFIG_SMP is >> not set. Peter observed: > While a proper cleanup, could you do it by re-arranging the methods so > as to not create an additional ifdef? Do not declare select_task_rq and some other methods as part of sched_class when CONFIG_SMP is not set. Also gather those methods to avoid CONFIG_SMP mess. Idea-by: Henrik Austad <henrik.austad@gmail.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Henrik Austad <henrik@austad.us> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22sched: wakeup preempt when small overlapPeter Zijlstra1-3/+3
Lin Ming reported a 10% OLTP regression against 2.6.27-rc4. The difference seems to come from different preemption agressiveness, which affects the cache footprint of the workload and its effective cache trashing. Aggresively preempt a task if its avg overlap is very small, this should avoid the task going to sleep and find it still running when we schedule back to it - saving a wakeup. Reported-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-05sched: make rt_sched_class, idle_sched_class staticHarvey Harrison1-1/+1
The C files are included directly in sched.c, so they are effectively static. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: high-res preemption tickPeter Zijlstra1-1/+1
Use HR-timers (when available) to deliver an accurate preemption tick. The regular scheduler tick that runs at 1/HZ can be too coarse when nice level are used. The fairness system will still keep the cpu utilisation 'fair' by then delaying the task that got an excessive amount of CPU time but try to minimize this by delivering preemption points spot-on. The average frequency of this extra interrupt is sched_latency / nr_latency. Which need not be higher than 1/HZ, its just that the distribution within the sched_latency period is important. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: RT-balance, add new methods to sched_classSteven Rostedt1-0/+31
Dmitry Adamushko found that the current implementation of the RT balancing code left out changes to the sched_setscheduler and rt_mutex_setprio. This patch addresses this issue by adding methods to the schedule classes to handle being switched out of (switched_from) and being switched into (switched_to) a sched_class. Also a method for changing of priorities is also added (prio_changed). This patch also removes some duplicate logic between rt_mutex_setprio and sched_setscheduler. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: de-SCHED_OTHER-ize the RT pathGregory Haskins1-0/+9
The current wake-up code path tries to determine if it can optimize the wake-up to "this_cpu" by computing load calculations. The problem is that these calculations are only relevant to SCHED_OTHER tasks where load is king. For RT tasks, priority is king. So the load calculation is completely wasted bandwidth. Therefore, we create a new sched_class interface to help with pre-wakeup routing decisions and move the load calculation as a function of CFS task's class. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-24sched: isolate SMP balancing code a bit morePeter Williams1-0/+4
At the moment, a lot of load balancing code that is irrelevant to non SMP systems gets included during non SMP builds. This patch addresses this issue and reduces the binary size on non SMP systems: text data bss dec hex filename 10983 28 1192 12203 2fab sched.o.before 10739 28 1192 11959 2eb7 sched.o.after Signed-off-by: Peter Williams <pwil3058@bigpond.net.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-24sched: reduce balance-tasks overheadPeter Williams1-3/+11
At the moment, balance_tasks() provides low level functionality for both move_tasks() and move_one_task() (indirectly) via the load_balance() function (in the sched_class interface) which also provides dual functionality. This dual functionality complicates the interfaces and internal mechanisms and makes the run time overhead of operations that are called with two run queue locks held. This patch addresses this issue and reduces the overhead of these operations. Signed-off-by: Peter Williams <pwil3058@bigpond.net.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-15sched: mark scheduling classes as constIngo Molnar1-1/+2
mark scheduling classes as const. The speeds up the code a bit and shrinks it: text data bss dec hex filename 40027 4018 292 44337 ad31 sched.o.before 40190 3842 292 44324 ad24 sched.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-15sched: revert recent removal of set_curr_task()Srivatsa Vaddagiri1-0/+5
Revert removal of set_curr_task. Use put_prev_task/set_curr_task when changing groups/policies Signed-off-by: Srivatsa Vaddagiri < vatsa@linux.vnet.ibm.com> Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-10-15sched: rework enqueue/dequeue_entity() to get rid of set_curr_task()Dmitry Adamushko1-5/+0
rework enqueue/dequeue_entity() to get rid of sched_class::set_curr_task(). This simplifies sched_setscheduler(), rt_mutex_setprio() and sched_move_tasks(). text data bss dec hex filename 24330 2734 20 27084 69cc sched.o.before 24233 2730 20 26983 6967 sched.o.after Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-15sched: group-scheduler coreSrivatsa Vaddagiri1-0/+5
Add interface to control cpu bandwidth allocation to task-groups. (not yet configurable, due to missing CONFIG_CONTAINERS) Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-08-09sched: remove the 'u64 now' parameter from ->put_prev_task()Ingo Molnar1-1/+1
remove the 'u64 now' parameter from ->put_prev_task(). ( identity transformation that causes no change in functionality. ) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09sched: remove the 'u64 now' parameter from ->pick_next_task()Ingo Molnar1-1/+1
remove the 'u64 now' parameter from ->pick_next_task(). ( identity transformation that causes no change in functionality. ) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09sched: remove the 'u64 now' parameter from ->dequeue_task()Ingo Molnar1-1/+1
remove the 'u64 now' parameter from ->dequeue_task(). ( identity transformation that causes no change in functionality. ) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09sched: fix bug in balance_tasks()Peter Williams1-1/+1
There are two problems with balance_tasks() and how it used: 1. The variables best_prio and best_prio_seen (inherited from the old move_tasks()) were only required to handle problems caused by the active/expired arrays, the order in which they were processed and the possibility that the task with the highest priority could be on either. These issues are no longer present and the extra overhead associated with their use is unnecessary (and possibly wrong). 2. In the absence of CONFIG_FAIR_GROUP_SCHED being set, the same this_best_prio variable needs to be used by all scheduling classes or there is a risk of moving too much load. E.g. if the highest priority task on this at the beginning is a fairly low priority task and the rt class migrates a task (during its turn) then that moved task becomes the new highest priority task on this_rq but when the sched_fair class initializes its copy of this_best_prio it will get the priority of the original highest priority task as, due to the run queue locks being held, the reschedule triggered by pull_task() will not have taken place. This could result in inappropriate overriding of skip_for_load and excessive load being moved. The attached patch addresses these problems by deleting all reference to best_prio and best_prio_seen and making this_best_prio a reference parameter to the various functions involved. load_balance_fair() has also been modified so that this_best_prio is only reset (in the loop) if CONFIG_FAIR_GROUP_SCHED is set. This should preserve the effect of helping spread groups' higher priority tasks around the available CPUs while improving system performance when CONFIG_FAIR_GROUP_SCHED isn't set. Signed-off-by: Peter Williams <pwil3058@bigpond.net.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09sched: simplify move_tasks()Peter Williams1-2/+2
The move_tasks() function is currently multiplexed with two distinct capabilities: 1. attempt to move a specified amount of weighted load from one run queue to another; and 2. attempt to move a specified number of tasks from one run queue to another. The first of these capabilities is used in two places, load_balance() and load_balance_idle(), and in both of these cases the return value of move_tasks() is used purely to decide if tasks/load were moved and no notice of the actual number of tasks moved is taken. The second capability is used in exactly one place, active_load_balance(), to attempt to move exactly one task and, as before, the return value is only used as an indicator of success or failure. This multiplexing of sched_task() was introduced, by me, as part of the smpnice patches and was motivated by the fact that the alternative, one function to move specified load and one to move a single task, would have led to two functions of roughly the same complexity as the old move_tasks() (or the new balance_tasks()). However, the new modular design of the new CFS scheduler allows a simpler solution to be adopted and this patch addresses that solution by: 1. adding a new function, move_one_task(), to be used by active_load_balance(); and 2. making move_tasks() a single purpose function that tries to move a specified weighted load and returns 1 for success and 0 for failure. One of the consequences of these changes is that neither move_one_task() or the new move_tasks() care how many tasks sched_class.load_balance() moves and this enables its interface to be simplified by returning the amount of load moved as its result and removing the load_moved pointer from the argument list. This helps simplify the new move_tasks() and slightly reduces the amount of work done in each of sched_class.load_balance()'s implementations. Further simplification, e.g. changes to balance_tasks(), are possible but (slightly) complicated by the special needs of load_balance_fair() so I've left them to a later patch (if this one gets accepted). NB Since move_tasks() gets called with two run queue locks held even small reductions in overhead are worthwhile. [ mingo@elte.hu ] this change also reduces code size nicely: text data bss dec hex filename 39216 3618 24 42858 a76a sched.o.before 39173 3618 24 42815 a73f sched.o.after Signed-off-by: Peter Williams <pwil3058@bigpond.net.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09sched: cfs core, kernel/sched_idletask.cIngo Molnar1-0/+71
add kernel/sched_idletask.c - which implements the idle thread scheduling class. This further simplifies sched.c (under CFS), for example a number of 'if (p == rq->idle)' type of special-cases can be removed from sched.c, and schedule() gets simpler too. Signed-off-by: Ingo Molnar <mingo@elte.hu>