summaryrefslogtreecommitdiffstats
path: root/kernel/ptrace.c
AgeCommit message (Collapse)AuthorFilesLines
2011-09-25ptrace: PTRACE_LISTEN forgets to unlock ->siglockOleg Nesterov1-13/+10
If PTRACE_LISTEN fails after lock_task_sighand() it doesn't drop ->siglock. Reported-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-18connector: add an event for monitoring process tracersVladimir Zapolskiy1-1/+6
This change adds a procfs connector event, which is emitted on every successful process tracer attach or detach. If some process connects to other one, kernelspace connector reports process id and thread group id of both these involved processes. On disconnection null process id is returned. Such an event allows to create a simple automated userspace mechanism to be aware about processes connecting to others, therefore predefined process policies can be applied to them if needed. Note, a detach signal is emitted only in case, if a tracer process explicitly executes PTRACE_DETACH request. In other cases like tracee or tracer exit detach event from proc connector is not reported. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-27do not change dead_task->exit_signalOleg Nesterov1-1/+0
__ptrace_detach() and do_notify_parent() set task->exit_signal = -1 to mark the task dead. This is no longer needed, nobody checks exit_signal to detect the EXIT_DEAD task. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27__ptrace_detach: avoid task_detached(), check do_notify_parent()Oleg Nesterov1-15/+18
__ptrace_detach() relies on the current obscure behaviour of do_notify_parent(tsk) which changes tsk->exit_signal if this child should be silently reaped. That is why we check task_detached(), it is true if the task is sub-thread, or it is the group_leader but its exit_signal was changed by do_notify_parent(). This is confusing, change the code to rely on !thread_group_leader() or the value returned by do_notify_parent(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-16ptrace: implement PTRACE_LISTENTejun Heo1-3/+39
The previous patch implemented async notification for ptrace but it only worked while trace is running. This patch introduces PTRACE_LISTEN which is suggested by Oleg Nestrov. It's allowed iff tracee is in STOP trap and puts tracee into quasi-running state - tracee never really runs but wait(2) and ptrace(2) consider it to be running. While ptracer is listening, tracee is allowed to re-enter STOP to notify an async event. Listening state is cleared on the first notification. Ptracer can also clear it by issuing INTERRUPT - tracee will re-trap into STOP with listening state cleared. This allows ptracer to monitor group stop state without running tracee - use INTERRUPT to put tracee into STOP trap, issue LISTEN and then wait(2) to wait for the next group stop event. When it happens, PTRACE_GETSIGINFO provides information to determine the current state. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_LISTEN 0x4208 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); if (si.si_signo != SIGTRAP) ptrace(PTRACE_LISTEN, tracee, NULL, NULL); else ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } This is identical to the program to test TRAP_NOTIFY except that tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped. This allows ptracer to monitor when group stop ends without running tracee. # ./test-listen tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 -v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into task_stopped_code() as suggested by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-16ptrace: implement PTRACE_INTERRUPTTejun Heo1-2/+27
Currently, there's no way to trap a running ptracee short of sending a signal which has various side effects. This patch implements PTRACE_INTERRUPT which traps ptracee without any signal or job control related side effect. The implementation is almost trivial. It uses the group stop trap - SIGTRAP | PTRACE_EVENT_STOP << 8. A new trap flag JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and cleared when any trap happens. As INTERRUPT should be useable regardless of the current state of tracee, task_is_traced() test in ptrace_check_attach() is skipped for INTERRUPT. PTRACE_INTERRUPT is available iff tracee is attached with PTRACE_SEIZE. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive pid=%d\n", getpid()); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: INTERRUPT and DETACH\n"); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_DETACH, tracee, NULL, NULL); nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); kill(tracee, SIGKILL); return 0; } When called without argument, tracee is seized from running state, interrupted and then detached back to running state. # ./test-interrupt tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: INTERRUPT and DETACH tracee: alive pid=4546 tracee: alive pid=4546 tracee: alive pid=4546 tracer: exiting When called with argument, tracee is seized from stopped state, continued, interrupted and then detached back to stopped state. # ./test-interrupt 1 tracee: alive pid=4548 tracee: alive pid=4548 tracee: alive pid=4548 tracer: INTERRUPT and DETACH tracer: exiting Before PTRACE_INTERRUPT, once the tracee was running, there was no way to trap tracee and do PTRACE_DETACH without causing side effect. -v2: Updated to use task_set_jobctl_pending() so that it doesn't end up scheduling TRAP_STOP if child is dying which may make the child unkillable. Spotted by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-16ptrace: implement PTRACE_SEIZETejun Heo1-6/+29
PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side effects on tracee signal and job control states. This patch implements a new ptrace request PTRACE_SEIZE which attaches a tracee without trapping it or affecting its signal and job control states. The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_* flags in @data. Currently, the only defined flag is PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE. PTRACE_SEIZE will change ptrace behaviors outside of attach itself. The changes will be implemented gradually and the DEVEL flag is to prevent programs which expect full SEIZE behavior from using it before all the behavior modifications are complete while allowing unit testing. The flag will be removed once SEIZE behaviors are completely implemented. * PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap. After attaching tracee continues to run unless a trap condition occurs. * PTRACE_SEIZE doesn't affect signal or group stop state. * If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of the stopping signals if group stop is in effect or SIGTRAP otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO instead of NULL. Seizing sets PT_SEIZED in ->ptrace of the tracee. This flag will be used to determine whether new SEIZE behaviors should be enabled. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts100ms = { .tv_nsec = 100000000 }; static const struct timespec ts1s = { .tv_sec = 1 }; static const struct timespec ts3s = { .tv_sec = 3 }; int main(int argc, char **argv) { pid_t tracee; tracee = fork(); if (tracee == 0) { nanosleep(&ts100ms, NULL); while (1) { printf("tracee: alive\n"); nanosleep(&ts1s, NULL); } } if (argc > 1) kill(tracee, SIGSTOP); nanosleep(&ts100ms, NULL); ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); if (argc > 1) { waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, NULL); } nanosleep(&ts3s, NULL); printf("tracer: exiting\n"); return 0; } When the above program is called w/o argument, tracee is seized while running and remains running. When tracer exits, tracee continues to run and print out messages. # ./test-seize-simple tracee: alive tracee: alive tracee: alive tracer: exiting tracee: alive tracee: alive When called with an argument, tracee is seized from stopped state and continued, and returns to stopped state when tracer exits. # ./test-seize tracee: alive tracee: alive tracee: alive tracer: exiting # ps -el|grep test-seize 1 T 0 4720 1 0 80 0 - 941 signal ttyS0 00:00:00 test-seize -v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan suggested. -v3: PTRACE_EVENT_STOP traps now report group stop state by signr. If group stop is in effect the stop signal number is returned as part of exit_code; otherwise, SIGTRAP. This was suggested by Denys and Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-16job control: introduce JOBCTL_TRAP_STOP and use it for group stop trapTejun Heo1-3/+9
do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-04ptrace: use bit_waitqueue for TRAPPING instead of wait_chldexitTejun Heo1-2/+8
ptracer->signal->wait_chldexit was used to wait for TRAPPING; however, ->wait_chldexit was already complicated with waker-side filtering without adding TRAPPING wait on top of it. Also, it unnecessarily made TRAPPING clearing depend on the current ptrace relationship - if the ptracee is detached, wakeup is lost. There is no reason to use signal->wait_chldexit here. We're just waiting for JOBCTL_TRAPPING bit to clear and given the relatively infrequent use of ptrace, bit_waitqueue can serve it perfectly. This patch makes JOBCTL_TRAPPING wait use bit_waitqueue instead of signal->wait_chldexit. -v2: Use JOBCTL_*_BIT macros instead of ilog2() as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04job control: introduce task_set_jobctl_pending()Tejun Heo1-3/+3
task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP pending bits too. Setting pending conditions on a dying task may make the task unkillable. Currently, each setting site is responsible for checking for the condition but with to-be-added job control traps this becomes too fragile. This patch adds task_set_jobctl_pending() which should be used when setting task->jobctl bits to schedule a stop or trap. The function performs the followings to ease setting pending bits. * Sanity checks. * If fatal signal is pending or PF_EXITING is set, no bit is set. * STOP_SIGMASK is automatically cleared if new value is being set. do_signal_stop() and ptrace_attach() are updated to use task_set_jobctl_pending() instead of setting STOP_PENDING explicitly. The surrounding structures around setting are changed to fit task_set_jobctl_pending() better but there should be no userland visible behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04ptrace: ptrace_check_attach(): rename @kill to @ignore_state and add commentsTejun Heo1-5/+19
PTRACE_INTERRUPT is going to be added which should also skip task_is_traced() check in ptrace_check_attach(). Rename @kill to @ignore_state and make it bool. Add function comment while at it. This patch doesn't introduce any behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04job control: rename signal->group_stop and flags to jobctl and update themTejun Heo1-6/+6
signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04ptrace: remove silly wait_trap variable from ptrace_attach()Tejun Heo1-3/+1
Remove local variable wait_trap which determines whether to wait for !TRAPPING or not and simply wait for it if attach was successful. -v2: Oleg pointed out wait should happen iff attach was successful. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-25ptrace: ptrace_resume() shouldn't wake up !TASK_TRACED threadOleg Nesterov1-1/+1
It is not clear why ptrace_resume() does wake_up_process(). Unless the caller is PTRACE_KILL the tracee should be TASK_TRACED so we can use wake_up_state(__TASK_TRACED). If sys_ptrace() races with SIGKILL we do not need the extra and potentionally spurious wakeup. If the caller is PTRACE_KILL, wake_up_process() is even more wrong. The tracee can sleep in any state in any place, and if we have a buggy code which doesn't handle a spurious wakeup correctly PTRACE_KILL can be used to exploit it. For example: int main(void) { int child, status; child = fork(); if (!child) { int ret; assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); ret = pause(); printf("pause: %d %m\n", ret); return 0x23; } sleep(1); assert(ptrace(PTRACE_KILL, child, 0,0) == 0); assert(child == wait(&status)); printf("wait: %x\n", status); return 0; } prints "pause: -1 Unknown error 514", -ERESTARTNOHAND leaks to the userland. In this case sys_pause() is buggy as well and should be fixed. I do not know what was the original rationality behind PTRACE_KILL. The man page is simply wrong and afaics it was always wrong. Imho it should be deprecated, or may be it should do send_sig(SIGKILL) as Denys suggests, but in any case I do not think that the current behaviour was intentional. Note: there is another problem, ptrace_resume() changes ->exit_code and this can race with SIGKILL too. Eventually we should change ptrace to not use ->exit_code. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-20Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/miscLinus Torvalds1-37/+81
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (41 commits) signal: trivial, fix the "timespec declared inside parameter list" warning job control: reorganize wait_task_stopped() ptrace: fix signal->wait_chldexit usage in task_clear_group_stop_trapping() signal: sys_sigprocmask() needs retarget_shared_pending() signal: cleanup sys_sigprocmask() signal: rename signandsets() to sigandnsets() signal: do_sigtimedwait() needs retarget_shared_pending() signal: introduce do_sigtimedwait() to factor out compat/native code signal: sys_rt_sigtimedwait: simplify the timeout logic signal: cleanup sys_rt_sigprocmask() x86: signal: sys_rt_sigreturn() should use set_current_blocked() x86: signal: handle_signal() should use set_current_blocked() signal: sigprocmask() should do retarget_shared_pending() signal: sigprocmask: narrow the scope of ->siglock signal: retarget_shared_pending: optimize while_each_thread() loop signal: retarget_shared_pending: consider shared/unblocked signals only signal: introduce retarget_shared_pending() ptrace: ptrace_check_attach() should not do s/STOPPED/TRACED/ signal: Turn SIGNAL_STOP_DEQUEUED into GROUP_STOP_DEQUEUED signal: do_signal_stop: Remove the unneeded task_clear_group_stop_pending() ...
2011-04-25ptrace: Prepare to fix racy accesses on task breakpointsFrederic Weisbecker1-0/+17
When a task is traced and is in a stopped state, the tracer may execute a ptrace request to examine the tracee state and get its task struct. Right after, the tracee can be killed and thus its breakpoints released. This can happen concurrently when the tracer is in the middle of reading or modifying these breakpoints, leading to dereferencing a freed pointer. Hence, to prepare the fix, create a generic breakpoint reference holding API. When a reference on the breakpoints of a task is held, the breakpoints won't be released until the last reference is dropped. After that, no more ptrace request on the task's breakpoints can be serviced for the tracer. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: v2.6.33.. <stable@kernel.org> Link: http://lkml.kernel.org/r/1302284067-7860-2-git-send-email-fweisbec@gmail.com
2011-04-07Merge branch 'ptrace' of ↵Oleg Nesterov1-37/+81
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into ptrace
2011-04-04ptrace: ptrace_check_attach() should not do s/STOPPED/TRACED/Oleg Nesterov1-5/+3
After "ptrace: Clean transitions between TASK_STOPPED and TRACED" d79fdd6d96f46fabb779d86332e3677c6f5c2a4f, ptrace_check_attach() should never see a TASK_STOPPED tracee and s/STOPPED/TRACED/ is no longer legal. Add the warning. Note: ptrace_check_attach() can be greatly simplified, in particular it doesn't need tasklist. But I'd prefer another patch for that. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-03-23userns: allow ptrace from non-init user namespacesSerge E. Hallyn1-12/+15
ptrace is allowed to tasks in the same user namespace according to the usual rules (i.e. the same rules as for two tasks in the init user namespace). ptrace is also allowed to a user namespace to which the current task the has CAP_SYS_PTRACE capability. Changelog: Dec 31: Address feedback by Eric: . Correct ptrace uid check . Rename may_ptrace_ns to ptrace_capable . Also fix the cap_ptrace checks. Jan 1: Use const cred struct Jan 11: use task_ns_capable() in place of ptrace_capable(). Feb 23: same_or_ancestore_user_ns() was not an appropriate check to constrain cap_issubset. Rather, cap_issubset() only is meaningful when both capsets are in the same user_ns. Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23ptrace: Always put ptracee into appropriate execution stateTejun Heo1-20/+39
Currently, __ptrace_unlink() wakes up the tracee iff it's in TASK_TRACED. For unlinking from PTRACE_DETACH, this is correct as the tracee is guaranteed to be in TASK_TRACED or dead; however, unlinking also happens when the ptracer exits and in this case the ptracee can be in any state and ptrace might be left running even if the group it belongs to is stopped. This patch updates __ptrace_unlink() such that GROUP_STOP_PENDING is reinstated regardless of the ptracee's current state as long as it's alive and makes sure that signal_wake_up() is called if execution state transition is necessary. Test case follows. #include <unistd.h> #include <time.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> static const struct timespec ts1s = { .tv_sec = 1 }; int main(void) { pid_t tracee; siginfo_t si; tracee = fork(); if (tracee == 0) { while (1) { nanosleep(&ts1s, NULL); write(1, ".", 1); } } ptrace(PTRACE_ATTACH, tracee, NULL, NULL); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); waitid(P_PID, tracee, &si, WSTOPPED); ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); write(1, "exiting", 7); return 0; } Before the patch, after the parent process exits, the child is left running and prints out "." every second. exiting..... (continues) After the patch, the group stop initiated by the implied SIGSTOP from PTRACE_ATTACH is re-established when the parent exits. exiting Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23ptrace: Collapse ptrace_untrace() into __ptrace_unlink()Tejun Heo1-25/+15
Remove the extra task_is_traced() check in __ptrace_unlink() and collapse ptrace_untrace() into __ptrace_unlink(). This is to prepare for further changes. While at it, drop the comment on top of ptrace_untrace() and convert __ptrace_unlink() comment to docbook format. Detailed comment will be added by the next patch. This patch doesn't cause any visible behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23ptrace: Clean transitions between TASK_STOPPED and TRACEDTejun Heo1-5/+44
Currently, if the task is STOPPED on ptrace attach, it's left alone and the state is silently changed to TRACED on the next ptrace call. The behavior breaks the assumption that arch_ptrace_stop() is called before any task is poked by ptrace and is ugly in that a task manipulates the state of another task directly. With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and TRACED can be made clean. The tracer can use the flag to tell the tracee to retry stop on attach and detach. On retry, the tracee will enter the desired state in the correct way. The lower 16bits of task->group_stop is used to remember the signal number which caused the last group stop. This is used while retrying for ptrace attach as the original group_exit_code could have been consumed with wait(2) by then. As the real parent may wait(2) and consume the group_exit_code anytime, the group_exit_code needs to be saved separately so that it can be used when switching from regular sleep to ptrace_stop(). This is recorded in the lower 16bits of task->group_stop. If a task is already stopped and there's no intervening SIGCONT, a ptrace request immediately following a successful PTRACE_ATTACH should always succeed even if the tracer doesn't wait(2) for attach completion; however, with this change, the tracee might still be TASK_RUNNING trying to enter TASK_TRACED which would cause the following request to fail with -ESRCH. This intermediate state is hidden from the ptracer by setting GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait for it to clear on its signal->wait_chldexit. Completing the transition or getting killed clears TRAPPING and wakes up the tracer. Note that the STOPPED -> RUNNING -> TRACED transition is still visible to other threads which are in the same group as the ptracer and the reverse transition is visible to all. Please read the comments for details. Oleg: * Spotted a race condition where a task may retry group stop without proper bookkeeping. Fixed by redoing bookkeeping on retry. * Spotted that the transition is visible to userland in several different ways. Most are fixed with GROUP_STOP_TRAPPING. Unhandled corner case is documented. * Pointed out not setting GROUP_STOP_SIGMASK on an already stopped task would result in more consistent behavior. * Pointed out that calling ptrace_stop() from do_signal_stop() in TASK_STOPPED can race with group stop start logic and then confuse the TRAPPING wait in ptrace_check_attach(). ptrace_stop() is now called with TASK_RUNNING. * Suggested using signal->wait_chldexit instead of bit wait. * Spotted a race condition between TRACED transition and clearing of TRAPPING. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
2011-03-23ptrace: Remove the extra wake_up_state() from ptrace_detach()Tejun Heo1-2/+0
This wake_up_state() has a turbulent history. This is a remnant from ancient ptrace implementation and patently wrong. Commit 95a3540d (ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic) removed it but the change was reverted later by commit edaba2c5 (ptrace: revert "ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic") citing compatibility breakage and general brokeness of the whole group stop / ptrace interaction. Then, recently, it got converted from wake_up_process() to wake_up_state() to make it less dangerous. Digging through the mailing archives, the compatibility breakage doesn't seem to be critical in the sense that the behavior isn't well defined or reliable to begin with and it seems to have been agreed to remove the wakeup with proper cleanup of the whole thing. Now that the group stop and its interaction with ptrace are being cleaned up, it's high time to finally kill this silliness. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com>
2011-03-04Mark ptrace_{traceme,attach,detach} staticLinus Torvalds1-3/+3
They are only used inside kernel/ptrace.c, and have been for a long time. We don't want to go back to the bad-old-days when architectures did things on their own, so make them static and private. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11ptrace: use safer wake up on ptrace_detach()Tejun Heo1-1/+1
The wake_up_process() call in ptrace_detach() is spurious and not interlocked with the tracee state. IOW, the tracee could be running or sleeping in any place in the kernel by the time wake_up_process() is called. This can lead to the tracee waking up unexpectedly which can be dangerous. The wake_up is spurious and should be removed but for now reduce its toxicity by only waking up if the tracee is in TRACED or STOPPED state. This bug can possibly be used as an attack vector. I don't think it will take too much effort to come up with an attack which triggers oops somewhere. Most sleeps are wrapped in condition test loops and should be safe but we have quite a number of places where sleep and wakeup conditions are expected to be interlocked. Although the window of opportunity is tiny, ptrace can be used by non-privileged users and with some loading the window can definitely be extended and exploited. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27signals: move cred_guard_mutex from task_struct to signal_structKOSAKI Motohiro1-2/+2
Oleg Nesterov pointed out we have to prevent multiple-threads-inside-exec itself and we can reuse ->cred_guard_mutex for it. Yes, concurrent execve() has no worth. Let's move ->cred_guard_mutex from task_struct to signal_struct. It naturally prevent multiple-threads-inside-exec. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27ptrace: cleanup ptrace_request()Namhyung Kim1-7/+7
Use new 'datavp' and 'datalp' variables to remove unnecesary castings. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27ptrace: change signature of sys_ptrace() and friendsNamhyung Kim1-6/+10
Since userspace API of ptrace syscall defines @addr and @data as void pointers, it would be more appropriate to define them as unsigned long in kernel. Therefore related functions are changed also. 'unsigned long' is typically used in other places in kernel as an opaque data type and that using this helps cleaning up a lot of warnings from sparse. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27ptrace: annotate lock context change on exit_ptrace()Namhyung Kim1-0/+2
exit_ptrace() releases and regrabs tasklist_lock but was missing proper annotation. Add it. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@redhat.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11ptrace: optimize exit_ptrace() for the likely caseOleg Nesterov1-3/+9
exit_ptrace() takes tasklist_lock unconditionally. We need this lock to avoid the race with ptrace_traceme(), it acts as a barrier. Change its caller, forget_original_parent(), to call exit_ptrace() under tasklist_lock. Change exit_ptrace() to drop and reacquire this lock if needed. This allows us to add the fastpath list_empty(ptraced) check. In the likely no-tracees case exit_ptrace() just returns and we avoid the lock() + unlock() sequence. "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> suggested to add this check, and he reports that this change adds about 11% improvement in some tests. Suggested-and-tested-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ptrace: PTRACE_GETFDPIC: fix the unsafe usage of child->mmOleg Nesterov1-2/+8
Now that Mike Frysinger unified the FDPIC ptrace code, we can fix the unsafe usage of child->mm in ptrace_request(PTRACE_GETFDPIC). We have the reference to task_struct, and ptrace_check_attach() verified the tracee is stopped. But nothing can protect from SIGKILL after that, we must not assume child->mm != NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Greg Ungerer <gerg@snapgear.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ptrace: unify FDPIC implementationsMike Frysinger1-0/+20
The Blackfin/FRV/SuperH guys all have the same exact FDPIC ptrace code in their arch handlers (since they were probably copied & pasted). Since these ptrace interfaces are an arch independent aspect of the FDPIC code, unify them in the common ptrace code so new FDPIC ports don't need to copy and paste this fundamental stuff yet again. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-18Merge branch 'perf-core-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits) perf tools: Add mode to build without newt support perf symbols: symbol inconsistency message should be done only at verbose=1 perf tui: Add explicit -lslang option perf options: Type check all the remaining OPT_ variants perf options: Type check OPT_BOOLEAN and fix the offenders perf options: Check v type in OPT_U?INTEGER perf options: Introduce OPT_UINTEGER perf tui: Add workaround for slang < 2.1.4 perf record: Fix bug mismatch with -c option definition perf options: Introduce OPT_U64 perf tui: Add help window to show key associations perf tui: Make <- exit menus too perf newt: Add single key shortcuts for zoom into DSO and threads perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed perf newt: Fix the 'A'/'a' shortcut for annotate perf newt: Make <- exit the ui_browser x86, perf: P4 PMU - fix counters management logic perf newt: Make <- zoom out filters perf report: Report number of events, not samples perf hist: Clarify events_stats fields usage ... Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
2010-04-26ptrace: Cleanup useless headerAlessio Igor Bogani1-1/+0
BKL isn't present anymore into this file thus we can safely remove smp_lock.h inclusion. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: James Morris <jmorris@namei.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-04-10ptrace: kill BKL in ptrace syscallArnd Bergmann1-10/+0
The comment suggests that this usage is stale. There is no bkl in the exec path so if there is a race lurking there, the bkl in ptrace is not going to help in this regard. Overview of the possibility of "accidental" races this bkl might protect: - ptrace_traceme() is protected against task removal and concurrent read/write on current->ptrace as it locks write tasklist_lock. - arch_ptrace_attach() is serialized by ptrace_traceme() against concurrent PTRACE_TRACEME or PTRACE_ATTACH - ptrace_attach() is protected the same way ptrace_traceme() and in turn serializes arch_ptrace_attach() - ptrace_check_attach() does its own well described serializing too. There is no obvious race here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Roland McGrath <roland@redhat.com>
2010-03-26x86, perf, bts, mm: Delete the never used BTS-ptrace codePeter Zijlstra1-1/+0
Support for the PMU's BTS features has been upstreamed in v2.6.32, but we still have the old and disabled ptrace-BTS, as Linus noticed it not so long ago. It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without regard for other uses (perf) and doesn't provide the flexibility needed for perf either. Its users are ptrace-block-step and ptrace-bts, since ptrace-bts was never used and ptrace-block-step can be implemented using a much simpler approach. So axe all 3000 lines of it. That includes the *locked_memory*() APIs in mm/mlock.c as well. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Markus Metzger <markus.t.metzger@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <20100325135413.938004390@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23ptrace: Fix ptrace_regset() comments and diagnose errors specificallySuresh Siddha1-1/+1
Return -EINVAL for the bad size and for unrecognized NT_* type in ptrace_regset() instead of -EIO. Also update the comments for this ptrace interface with more clarifications. Requested-by: Roland McGrath <roland@redhat.com> Requested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20100222225240.397523600@sbs-t61.sc.intel.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11ptrace: Add support for generic PTRACE_GETREGSET/PTRACE_SETREGSETSuresh Siddha1-0/+88
Generic support for PTRACE_GETREGSET/PTRACE_SETREGSET commands which export the regsets supported by each architecture using the correponding NT_* types. These NT_* types are already part of the userland ABI, used in representing the architecture specific register sets as different NOTES in an ELF core file. 'addr' parameter for the ptrace system call encode the REGSET type (using the corresppnding NT_* type) and the 'data' parameter points to the struct iovec having the user buffer and the length of that buffer. struct iovec iov = { buf, len}; ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov); On successful completion, iov.len will be updated by the kernel specifying how much the kernel has written/read to/from the user's iov.buf. x86 extended state registers are primarily exported using this interface. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20100211195614.886724710@sbs-t61.sc.intel.com> Acked-by: Hongjiu Lu <hjl.tools@gmail.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-09-24ptrace: __ptrace_detach: do __wake_up_parent() if we reap the traceeOleg Nesterov1-4/+7
The bug is old, it wasn't cause by recent changes. Test case: static void *tfunc(void *arg) { int pid = (long)arg; assert(ptrace(PTRACE_ATTACH, pid, NULL, NULL) == 0); kill(pid, SIGKILL); sleep(1); return NULL; } int main(void) { pthread_t th; long pid = fork(); if (!pid) pause(); signal(SIGCHLD, SIG_IGN); assert(pthread_create(&th, NULL, tfunc, (void*)pid) == 0); int r = waitpid(-1, NULL, __WNOTHREAD); printf("waitpid: %d %m\n", r); return 0; } Before the patch this program hangs, after this patch waitpid() correctly fails with errno == -ECHILD. The problem is, __ptrace_detach() reaps the EXIT_ZOMBIE tracee if its ->real_parent is our sub-thread and we ignore SIGCHLD. But in this case we should wake up other threads which can sleep in do_wait(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Vitaly Mayatskikh <vmayatsk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-14Merge branch 'master' into nextJames Morris1-2/+2
Conflicts: include/linux/personality.h Use Linus' version. Signed-off-by: James Morris <jmorris@namei.org>
2009-07-06cred_guard_mutex: do not return -EINTR to user-spaceOleg Nesterov1-2/+2
do_execve() and ptrace_attach() return -EINTR if mutex_lock_interruptible(->cred_guard_mutex) fails. This is not right, change the code to return ERESTARTNOINTR. Perhaps we should also change proc_pid_attr_write(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: David Howells <dhowells@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-25security: rename ptrace_may_access => ptrace_access_checkIngo Molnar1-1/+1
The ->ptrace_may_access() methods are named confusingly - the real ptrace_may_access() returns a bool, while these security checks have a retval convention. Rename it to ptrace_access_check, to reduce the confusion factor. [ Impact: cleanup, no code changed ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: James Morris <jmorris@namei.org>
2009-06-18ptrace: don't take tasklist to get/set ->last_siginfoOleg Nesterov1-10/+6
Change ptrace_getsiginfo/ptrace_setsiginfo to use lock_task_sighand() without tasklist_lock. Perhaps it makes sense to make a single helper with "bool rw" argument. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ptrace_get_task_struct: s/tasklist/rcu/, make it staticOleg Nesterov1-13/+3
- Use rcu_read_lock() instead of tasklist_lock to find/get the task in ptrace_get_task_struct(). - Make it static, it has no callers outside of ptrace.c. - The comment doesn't match the reality, this helper does not do any checks. Beacuse it is really trivial and static I removed the whole comment. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ptrace: do not use task_lock() for attachOleg Nesterov1-46/+13
Remove the "Nasty, nasty" lock dance in ptrace_attach()/ptrace_traceme() - from now task_lock() has nothing to do with ptrace at all. With the recent changes nobody uses task_lock() to serialize with ptrace, but in fact it was never needed and it was never used consistently. However ptrace_attach() calls __ptrace_may_access() and needs task_lock() to pin task->mm for get_dumpable(). But we can call __ptrace_may_access() before we take tasklist_lock, ->cred_exec_mutex protects us against do_execve() path which can change creds and MMF_DUMP* flags. (ugly, but we can't use ptrace_may_access() because it hides the error code, so we have to take task_lock() and use __ptrace_may_access()). NOTE: this change assumes that LSM hooks, security_ptrace_may_access() and security_ptrace_traceme(), can be called without task_lock() held. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ptrace: cleanup check/set of PT_PTRACED during attachOleg Nesterov1-50/+51
ptrace_attach() and ptrace_traceme() are the last functions which look as if the untraced task can have task->ptrace != 0, this must not be possible. Change the code to just check ->ptrace != 0 and s/|=/=/ to set PT_PTRACED. Also, a couple of trivial whitespace cleanups in ptrace_attach(). And move ptrace_traceme() up near ptrace_attach() to keep them close to each other. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18ptrace: ptrace_attach: check PF_KTHREAD + exit_state instead of ->mmOleg Nesterov1-9/+10
- Add PF_KTHREAD check to prevent attaching to the kernel thread with a borrowed ->mm. With or without this change we can race with daemonize() which can set PF_KTHREAD or clear ->mm after ptrace_attach() does the check, but this doesn't matter because reparent_to_kthreadd() does ptrace_unlink(). - Kill "!task->mm" check. We don't really care about ->mm != NULL, and the task can call exit_mm() right after we drop task_lock(). What we need is to make sure we can't attach after exit_notify(), check task->exit_state != 0 instead. Also, move the "already traced" check down for cosmetic reasons. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11Merge branch 'for-linus' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (44 commits) nommu: Provide mmap_min_addr definition. TOMOYO: Add description of lists and structures. TOMOYO: Remove unused field. integrity: ima audit dentry_open failure TOMOYO: Remove unused parameter. security: use mmap_min_addr indepedently of security models TOMOYO: Simplify policy reader. TOMOYO: Remove redundant markers. SELinux: define audit permissions for audit tree netlink messages TOMOYO: Remove unused mutex. tomoyo: avoid get+put of task_struct smack: Remove redundant initialization. integrity: nfsd imbalance bug fix rootplug: Remove redundant initialization. smack: do not beyond ARRAY_SIZE of data integrity: move ima_counts_get integrity: path_check update IMA: Add __init notation to ima functions IMA: Minimal IMA policy and boot param for TCB IMA policy selinux: remove obsolete read buffer limit from sel_read_bool ...
2009-06-10Merge branch 'tracing-for-linus' of ↵Linus Torvalds1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits) Revert "x86, bts: reenable ptrace branch trace support" tracing: do not translate event helper macros in print format ftrace/documentation: fix typo in function grapher name tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK tracing: add protection around module events unload tracing: add trace_seq_vprint interface tracing: fix the block trace points print size tracing/events: convert block trace points to TRACE_EVENT() ring-buffer: fix ret in rb_add_time_stamp ring-buffer: pass in lockdep class key for reader_lock tracing: add annotation to what type of stack trace is recorded tracing: fix multiple use of __print_flags and __print_symbolic tracing/events: fix output format of user stack tracing/events: fix output format of kernel stack tracing/trace_stack: fix the number of entries in the header ring-buffer: discard timestamps that are at the start of the buffer ring-buffer: try to discard unneeded timestamps ring-buffer: fix bug in ring_buffer_discard_commit ftrace: do not profile functions when disabled tracing: make trace pipe recognize latency format flag ...
2009-06-09Merge branch 'master' into nextJames Morris1-0/+2