summaryrefslogtreecommitdiffstats
path: root/kernel/module.c
AgeCommit message (Collapse)AuthorFilesLines
2009-08-14Merge branch 'percpu-for-linus' into percpu-for-nextTejun Heo1-4/+5
Conflicts: arch/sparc/kernel/smp_64.c arch/x86/kernel/cpu/perf_counter.c arch/x86/kernel/setup_percpu.c drivers/cpufreq/cpufreq_ondemand.c mm/percpu.c Conflicts in core and arch percpu codes are mostly from commit ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many num_possible_cpus() with nr_cpu_ids. As for-next branch has moved all the first chunk allocators into mm/percpu.c, the changes are moved from arch code to mm/percpu.c. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-07-27module: use MODULE_SYMBOL_PREFIX with module_layoutMike Frysinger1-1/+2
The check_modstruct_version() needs to look up the symbol "module_layout" in the kernel, but it does so literally and not by a C identifier. The trouble is that it does not include a symbol prefix for those ports that need it (like the Blackfin and H8300 port). So make sure we tack on the MODULE_SYMBOL_PREFIX define to the front of it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08Remove multiple KERN_ prefixes from printk formatsJoe Perches1-3/+3
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24percpu: use dynamic percpu allocator as the default percpu allocatorTejun Heo1-3/+3
This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use dynamic percpu allocator. The first chunk is allocated using embedding helper and 8k is reserved for modules. This ensures that the new allocator behaves almost identically to the original allocator as long as static percpu variables are concerned, so it shouldn't introduce much breakage. s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing range limit the addressing model imposes. Unfortunately, this breaks if the address is specified using a variable, so for now, the two archs aren't converted. The following architectures are affected by this change. * sh * arm * cris * mips * sparc(32) * blackfin * avr32 * parisc (broken, under investigation) * m32r * powerpc(32) As this change makes the dynamic allocator the default one, CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert - CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted archs. These archs implement their own setup_per_cpu_areas() and the conversion is not trivial. * powerpc(64) * sparc(64) * ia64 * alpha * s390 Boot and batch alloc/free tests on x86_32 with debug code (x86_32 doesn't use default first chunk initialization). Compile tested on sparc(32), powerpc(32), arm and alpha. Kyle McMartin reported that this change breaks parisc. The problem is still under investigation and he is okay with pushing this patch forward and fixing parisc later. [ Impact: use dynamic allocator for most archs w/o custom percpu setup ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@kernel.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu>
2009-06-18kernel: constructor supportPeter Oberparleiter1-0/+16
Call constructors (gcc-generated initcall-like functions) during kernel start and module load. Constructors are e.g. used for gcov data initialization. Disable constructor support for usermode Linux to prevent conflicts with host glibc. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16printk: add KERN_DEFAULT loglevel to print_modules()Linus Torvalds1-1/+1
Several WARN_ON() messages omit the '\n' at the end of the string, which is a simple (and understandable) error. The next line printed after that warning line is usually the current module list, and that printk does not have a log-level marker - resulting in one long mixed-up line. Adding this loglevel marker will now avoid this unreadable mess. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-12module: trim exception table on init free.Rusty Russell1-0/+1
It's theoretically possible that there are exception table entries which point into the (freed) init text of modules. These could cause future problems if other modules get loaded into that memory and cause an exception as we'd see the wrong fixup. The only case I know of is kvm-intel.ko (when CONFIG_CC_OPTIMIZE_FOR_SIZE=n). Amerigo fixed this long-standing FIXME in the x86 version, but this patch is more general. This implements trim_init_extable(); most archs are simple since they use the standard lib/extable.c sort code. Alpha and IA64 use relative addresses in their fixups, so thier trimming is a slight variation. Sparc32 is unique; it doesn't seem to define ARCH_HAS_SORT_EXTABLE, yet it defines its own sort_extable() which overrides the one in lib. It doesn't sort, so we have to mark deleted entries instead of actually trimming them. Inspired-by: Amerigo Wang <amwang@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-alpha@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-ia64@vger.kernel.org
2009-06-11Merge branch 'for-linus' of git://linux-arm.org/linux-2.6Linus Torvalds1-0/+56
* 'for-linus' of git://linux-arm.org/linux-2.6: kmemleak: Add the corresponding MAINTAINERS entry kmemleak: Simple testing module for kmemleak kmemleak: Enable the building of the memory leak detector kmemleak: Remove some of the kmemleak false positives kmemleak: Add modules support kmemleak: Add kmemleak_alloc callback from alloc_large_system_hash kmemleak: Add the vmalloc memory allocation/freeing hooks kmemleak: Add the slub memory allocation/freeing hooks kmemleak: Add the slob memory allocation/freeing hooks kmemleak: Add the slab memory allocation/freeing hooks kmemleak: Add documentation on the memory leak detector kmemleak: Add the base support Manual conflict resolution (with the slab/earlyboot changes) in: drivers/char/vt.c init/main.c mm/slab.c
2009-06-11Merge branch 'for-linus' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (44 commits) nommu: Provide mmap_min_addr definition. TOMOYO: Add description of lists and structures. TOMOYO: Remove unused field. integrity: ima audit dentry_open failure TOMOYO: Remove unused parameter. security: use mmap_min_addr indepedently of security models TOMOYO: Simplify policy reader. TOMOYO: Remove redundant markers. SELinux: define audit permissions for audit tree netlink messages TOMOYO: Remove unused mutex. tomoyo: avoid get+put of task_struct smack: Remove redundant initialization. integrity: nfsd imbalance bug fix rootplug: Remove redundant initialization. smack: do not beyond ARRAY_SIZE of data integrity: move ima_counts_get integrity: path_check update IMA: Add __init notation to ima functions IMA: Minimal IMA policy and boot param for TCB IMA policy selinux: remove obsolete read buffer limit from sel_read_bool ...
2009-06-11kmemleak: Add modules supportCatalin Marinas1-0/+56
This patch handles the kmemleak operations needed for modules loading so that memory allocations from inside a module are properly tracked. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-05-08Merge branch 'master' into nextJames Morris1-113/+161
2009-04-17ftrace: use module notifier for function tracerSteven Rostedt1-12/+7
The hooks in the module code for the function tracer must be called before any of that module code runs. The function tracer hooks modify the module (replacing calls to mcount to nops). If the code is executed while the change occurs, then the CPU can take a GPF. To handle the above with a bit of paranoia, I originally implemented the hooks as calls directly from the module code. After examining the notifier calls, it looks as though the start up notify is called before any of the module's code is executed. This makes the use of the notify safe with ftrace. Only the startup notify is required to be "safe". The shutdown simply removes the entries from the ftrace function list, and does not modify any code. This change has another benefit. It removes a issue with a reverse dependency in the mutexes of ftrace_lock and module_mutex. [ Impact: fix lock dependency bug, cleanup ] Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15modules: Fix up build when CONFIG_MODULE_UNLOAD=n.Stephen Rothwell1-3/+3
Commit 3d43321b7015387cfebbe26436d0e9d299162ea1 ("modules: sysctl to block module loading") introduces a modules_disabled variable that is only defined if CONFIG_MODULE_UNLOAD is enabled, despite being used in other places. This moves it up and fixes up the build. CC kernel/module.o kernel/module.c: In function 'sys_init_module': kernel/module.c:2401: error: 'modules_disabled' undeclared (first use in this function) kernel/module.c:2401: error: (Each undeclared identifier is reported only once kernel/module.c:2401: error: for each function it appears in.) make[1]: *** [kernel/module.o] Error 1 make: *** [kernel/module.o] Error 2 Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: James Morris <jmorris@namei.org>
2009-04-14tracing/events: add support for modules to TRACE_EVENTSteven Rostedt1-0/+7
Impact: allow modules to add TRACE_EVENTS on load This patch adds the final hooks to allow modules to use the TRACE_EVENT macro. A notifier and a data structure are used to link the TRACE_EVENTs defined in the module to connect them with the ftrace event tracing system. It also adds the necessary automated clean ups to the trace events when a module is removed. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11async: Fix module loading async-work regressionLinus Torvalds1-0/+3
Several drivers use asynchronous work to do device discovery, and we synchronize with them in the compiled-in case before we actually try to mount root filesystems etc. However, when compiled as modules, that synchronization is missing - the module loading completes, but the driver hasn't actually finished probing for devices, and that means that any user mode that expects to use the devices after the 'insmod' is now potentially broken. We already saw one case of a similar issue in the ACPI battery code, where the kernel itself expected the module to be all done, and unmapped the init memory - but the async device discovery was still running. That got hacked around by just removing the "__init" (see commit 5d38258ec026921a7b266f4047ebeaa75db358e5 "ACPI battery: fix async boot oops"), but the real fix is to just make the module loading wait for all async work to be completed. It will slow down module loading, but since common devices should be built in anyway, and since the bug is really annoying and hard to handle from user space (and caused several S3 resume regressions), the simple fix to wait is the right one. This fixes at least http://bugzilla.kernel.org/show_bug.cgi?id=13063 but probably a few other bugzilla entries too (12936, for example), and is confirmed to fix Rafael's storage driver breakage after resume bug report (no bugzilla entry). We should also be able to now revert that ACPI battery fix. Reported-and-tested-by: Rafael J. Wysocki <rjw@suse.com> Tested-by: Heinz Diehl <htd@fancy-poultry.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Revert "module: remove the SHF_ALLOC flag on the __versions section."Rusty Russell1-3/+0
This reverts commit 9cb610d8e35fe3ec95a2fe2030b02f85aeea83c1. This was an impressively stupid patch. Firstly, we reset the SHF_ALLOC flag lower down in the same function, so the patch was useless. Even better, find_sec() ignores sections with SHF_ALLOC not set, so it breaks CONFIG_MODVERSIONS=y with CONFIG_MODULE_FORCE_LOAD=n, which refuses to load the module since it can't find the __versions section. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-04-05Merge branch 'tracing-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits) tracing, net: fix net tree and tracing tree merge interaction tracing, powerpc: fix powerpc tree and tracing tree interaction ring-buffer: do not remove reader page from list on ring buffer free function-graph: allow unregistering twice trace: make argument 'mem' of trace_seq_putmem() const tracing: add missing 'extern' keywords to trace_output.h tracing: provide trace_seq_reserve() blktrace: print out BLK_TN_MESSAGE properly blktrace: extract duplidate code blktrace: fix memory leak when freeing struct blk_io_trace blktrace: fix blk_probes_ref chaos blktrace: make classic output more classic blktrace: fix off-by-one bug blktrace: fix the original blktrace blktrace: fix a race when creating blk_tree_root in debugfs blktrace: fix timestamp in binary output tracing, Text Edit Lock: cleanup tracing: filter fix for TRACE_EVENT_FORMAT events ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release() x86: kretprobe-booster interrupt emulation code fix ... Fix up trivial conflicts in arch/parisc/include/asm/ftrace.h include/linux/memory.h kernel/extable.c kernel/module.c
2009-04-03modules: sysctl to block module loadingKees Cook1-2/+5
Implement a sysctl file that disables module-loading system-wide since there is no longer a viable way to remove CAP_SYS_MODULE after the system bounding capability set was removed in 2.6.25. Value can only be set to "1", and is tested only if standard capability checks allow CAP_SYS_MODULE. Given existing /dev/mem protections, this should allow administrators a one-way method to block module loading after initial boot-time module loading has finished. Signed-off-by: Kees Cook <kees.cook@canonical.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-04-02Merge branch 'tracing/core-v2' into tracing-for-linusIngo Molnar1-1/+1
Conflicts: include/linux/slub_def.h lib/Kconfig.debug mm/slob.c mm/slub.c
2009-03-31module: use strstarts()Rusty Russell1-7/+4
Impact: minor cleanup. I'm not going to neaten anyone else's code, but I'm happy to clean up my own. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: don't use stop_machine on module loadRusty Russell1-9/+3
Kay Sievers <kay.sievers@vrfy.org> discovered that boot times are slowed by about half a second because all the stop_machine_create() calls, and he only probes about 40 modules (I have 125 loaded on this laptop). We only do stop_machine_create() so we can unlink the module if something goes wrong, but it's overkill (and buggy anyway: if stop_machine_create() fails we still call stop_machine_destroy()). Since we are only protecting against kallsyms (esp. oops) walking the list, synchronize_sched() is sufficient (synchronize_rcu() is probably sufficient, but we're not in a hurry). Kay says of this patch: ... no module takes more than 40 millisecs to link now, most of them are between 3 and 8 millisecs. That looks very different to the numbers without this patch and the otherwise same setup, where we get heavy noise in the traces and many delays of up to 200 millisecs until linking, most of them taking 30+ millisecs. Tested-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: include other structures in module version checkRusty Russell1-5/+13
With CONFIG_MODVERSIONS, we version 'struct module' using a dummy export, but other things matter too: 1) 'struct modversion_info' determines the layout of the __versions section, 2) 'struct kernel_param' determines the layout of the __params section, 3) 'struct kernel_symbol' determines __ksymtab*. 4) 'struct marker' determines __markers. 5) 'struct tracepoint' determines __tracepoints. So we rename 'struct_module' to 'module_layout' and include these in the signature. Now it's general we can add others later on without confusion. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: remove the SHF_ALLOC flag on the __versions section.Rusty Russell1-0/+3
Impact: reduce kernel memory usage This patch just takes off the SHF_ALLOC flag on __versions so we don't keep them around after module load. This saves about 7% of module memory if CONFIG_MODVERSIONS=y. Cc: Shawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: clarify the force-loading taint message.Rusty Russell1-6/+6
Impact: Message cleanup Two of three callers of try_to_force_load() are not because of a missing version, so change the messages: Old: <modname>: no version for "magic" found: kernel tainted. New: <modname>: bad vermagic: kernel tainted. Old: <modname>: no version for "nocrc" found: kernel tainted. New: <modname>: no versions for exported symbols: kernel tainted. Old: <modname>: no version for "<symname>" found: kernel tainted. New: <modname>: <symname>: kernel tainted. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: Export symbols needed for KspliceTim Abbott1-24/+19
Impact: Expose some module.c symbols Ksplice uses several functions from module.c in order to resolve symbols and implement dependency handling. Calling these functions requires holding module_mutex, so it is exported. (This is just the module part of a bigger add-exports patch from Tim). Cc: Anders Kaseorg <andersk@mit.edu> Cc: Jeff Arnold <jbarnold@mit.edu> Signed-off-by: Tim Abbott <tabbott@mit.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31Ksplice: Add functions for walking kallsyms symbolsAnders Kaseorg1-0/+19
Impact: New API kallsyms_lookup_name only returns the first match that it finds. Ksplice needs information about all symbols with a given name in order to correctly resolve local symbols. kallsyms_on_each_symbol provides a generic mechanism for iterating over the kallsyms table. Cc: Jeff Arnold <jbarnold@mit.edu> Cc: Tim Abbott <tabbott@mit.edu> Signed-off-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: remove module_text_address()Rusty Russell1-13/+4
Impact: Replace and remove risky (non-EXPORTed) API module_text_address() returns a pointer to the module, which given locking improvements in module.c, is useless except to test for NULL: 1) If the module can't go away, use __module_text_address. 2) Otherwise, just use is_module_text_address(). Cc: linux-mtd@lists.infradead.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: __module_addressRusty Russell1-18/+58
Impact: New API, cleanup ksplice wants to know the bounds of a module, not just the module text. It makes sense to have __module_address. We then implement is_module_address and __module_text_address in terms of this (and change is_module_text_address() to bool while we're at it). Also, add proper kerneldoc for them all. Cc: Anders Kaseorg <andersk@mit.edu> Cc: Jeff Arnold <jbarnold@mit.edu> Cc: Tim Abbott <tabbott@mit.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: Make find_symbol return a struct kernel_symbolTim Abbott1-38/+37
Impact: Cleanup, internal API change Ksplice needs access to the kernel_symbol structure in order to support modifications to the exported symbol table. Cc: Anders Kaseorg <andersk@mit.edu> Cc: Jeff Arnold <jbarnold@mit.edu> Signed-off-by: Tim Abbott <tabbott@mit.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (bugfix and style)
2009-03-31kernel/module.c: fix an unused goto labelAmérico Wang1-1/+1
Impact: cleanup Label 'free_init' is only used when defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP), so move it inside to shut up gcc. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31param: fix charp parameters set via sysfsRusty Russell1-6/+8
Impact: fix crash on reading from /sys/module/.../ieee80211_default_rc_algo The module_param type "charp" simply sets a char * pointer in the module to the parameter in the commandline string: this is why we keep the (mangled) module command line around. But when set via sysfs (as about 11 charp parameters can be) this memory is freed on the way out of the write(). Future reads hit random mem. So we kstrdup instead: we have to check we're not in early commandline parsing, and we have to note when we've used it so we can reliably kfree the parameter when it's next overwritten, and also on module unload. (Thanks to Randy Dunlap for CONFIG_SYSFS=n fixes) Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Diagnosed-by: Frederic Weisbecker <fweisbec@gmail.com> Tested-by: Frederic Weisbecker <fweisbec@gmail.com> Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-27Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2Ingo Molnar1-15/+49
Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24dynamic debug: combine dprintk and dynamic printkJason Baron1-15/+10
This patch combines Greg Bank's dprintk() work with the existing dynamic printk patchset, we are now calling it 'dynamic debug'. The new feature of this patchset is a richer /debugfs control file interface, (an example output from my system is at the bottom), which allows fined grained control over the the debug output. The output can be controlled by function, file, module, format string, and line number. for example, enabled all debug messages in module 'nf_conntrack': echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control to disable them: echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control A further explanation can be found in the documentation patch. Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-20Merge branches 'tracing/ftrace', 'tracing/kprobes', 'tracing/tasks' and ↵Ingo Molnar1-12/+14
'linus' into tracing/core
2009-03-18module: fix refptr allocation and release orderMasami Hiramatsu1-12/+14
Impact: fix ref-after-free crash on failed module load Fix refptr bug: Change refptr allocation and release order not to access a module data structure pointed by 'mod' after freeing mod->module_core. This bug will cause kernel panic(e.g. failed to find undefined symbols). This bug was reported on systemtap bugzilla. http://sources.redhat.com/bugzilla/show_bug.cgi?id=9927 Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-10Merge branch 'x86/core' into tracing/ftraceIngo Molnar1-1/+1
Semantic merge: kernel/trace/trace_functions_graph.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06Merge branch 'x86/core' into tracing/texteditIngo Molnar1-15/+49
Conflicts: arch/x86/Kconfig block/blktrace.c kernel/irq/handle.c Semantic conflict: kernel/trace/blktrace.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06percpu, module: implement reserved allocation and use it for module percpu ↵Tejun Heo1-1/+1
variables Impact: add reserved allocation functionality and use it for module percpu variables This patch implements reserved allocation from the first chunk. When setting up the first chunk, arch can ask to set aside certain number of bytes right after the core static area which is available only through a separate reserved allocator. This will be used primarily for module static percpu variables on architectures with limited relocation range to ensure that the module perpcu symbols are inside the relocatable range. If reserved area is requested, the first chunk becomes reserved and isn't available for regular allocation. If the first chunk also includes piggy-back dynamic allocation area, a separate chunk mapping the same region is created to serve dynamic allocation. The first one is called static first chunk and the second dynamic first chunk. Although they share the page map, their different area map initializations guarantee they serve disjoint areas according to their purposes. If arch doesn't setup reserved area, reserved allocation is handled like any other allocation. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-02-20percpu: implement new dynamic percpu allocatorTejun Heo1-0/+31
Impact: new scalable dynamic percpu allocator which allows dynamic percpu areas to be accessed the same way as static ones Implement scalable dynamic percpu allocator which can be used for both static and dynamic percpu areas. This will allow static and dynamic areas to share faster direct access methods. This feature is optional and enabled only when CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is defined by arch. Please read comment on top of mm/percpu.c for details. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2009-02-20module: reorder module pcpu related functionsTejun Heo1-15/+18
Impact: cleanup Move percpu_modinit() upwards. This is to ease further changes. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-02-09tracing/function-graph-tracer: drop the kernel_text_address checkFrederic Weisbecker1-1/+1
When the function graph tracer picks a return address, it ensures this address is really a kernel text one by calling __kernel_text_address() Actually this path has never been taken.Its role was more likely to debug the tracer on the beginning of its development but this function is wasteful since it is called for every traced function. The fault check is already sufficient. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-02modules: Use a better scheme for refcountingEric Dumazet1-10/+25
Current refcounting for modules (done if CONFIG_MODULE_UNLOAD=y) is using a lot of memory. Each 'struct module' contains an [NR_CPUS] array of full cache lines. This patch uses existing infrastructure (percpu_modalloc() & percpu_modfree()) to allocate percpu space for the refcount storage. Instead of wasting NR_CPUS*128 bytes (on i386), we now use nr_cpu_ids*sizeof(local_t) bytes. On a typical distro, where NR_CPUS=8, shiping 2000 modules, we reduce size of module files by about 2 Mbytes. (1Kb per module) Instead of having all refcounters in the same memory node - with TLB misses because of vmalloc() - this new implementation permits to have better NUMA properties, since each CPU will use storage on its preferred node, thanks to percpu storage. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14[CVE-2009-0029] System call wrappers part 08Heiko Carstens1-6/+4
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-07async: Asynchronous function calls to speed up kernel bootArjan van de Ven1-0/+2
Right now, most of the kernel boot is strictly synchronous, such that various hardware delays are done sequentially. In order to make the kernel boot faster, this patch introduces infrastructure to allow doing some of the initialization steps asynchronously, which will hide significant portions of the hardware delays in practice. In order to not change device order and other similar observables, this patch does NOT do full parallel initialization. Rather, it operates more in the way an out of order CPU does; the work may be done out of order and asynchronous, but the observable effects (instruction retiring for the CPU) are still done in the original sequence. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-01-06module: add MODULE_STATE_LIVE notifyMasami Hiramatsu1-0/+2
Add a module notifier call which notifies that the state of a module changes from MODULE_STATE_COMING to MODULE_STATE_LIVE. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06module: add within_module_core() and within_module_init()Masami Hiramatsu1-8/+8
This series of patches allows kprobes to probe module's __init and __exit functions. This means, you can probe driver initialization and terminating. Currently, kprobes can't probe __init function because these functions are freed after module initialization. And it also can't probe module __exit functions because kprobe increments reference count of target module and user can't unload it. this means __exit functions never be called unless removing probes from the module. To solve both cases, this series of patches introduces GONE flag and sets it when the target code is freed(for this purpose, kprobes hooks MODULE_STATE_* events). This also removes refcount incrementing for allowing user to unload target module. Users can check which probes are GONE by debugfs interface. For taking timing of freeing module's .init text, these also include a patch which adds module's notifier of MODULE_STATE_LIVE event. This patch: Add within_module_core() and within_module_init() for checking whether an address is in the module .init.text section or .text section, and replace within() local inline functions in kernel/module.c with them. kprobes uses these functions to check where the kprobe is inserted. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06Remove remaining unwinder codeAlexey Dobriyan1-15/+0
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Gabor Gombas <gombasg@sztaki.hu> Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05module: convert to stop_machine_create/destroy.Heiko Carstens1-2/+21
The module code relies on a non-failing stop_machine call. So we create the kstop threads in advance and with that make sure the call won't fail. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-05module: fix module loading failure of large kernel modules for pariscHelge Deller1-3/+13
When creating the final layout of a kernel module in memory, allow the module loader to reserve some additional memory in front of a given section. This is currently only needed for the parisc port which needs to put the stub entries there to fulfill the 17/22bit PCREL relocations with large kernel modules like xfs. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (renamed fn)
2009-01-05module: fix warning of unused function when !CONFIG_PROC_FSJianjun Kong1-2/+2
Fix this warning: kernel/module.c:824: warning: ‘print_unload_info’ defined but not used print_unload_info() just was used when CONFIG_PROC_FS was defined. This patch mark print_unload_info() inline to solve the problem. Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> CC: Ingo Molnar <mingo@elte.hu> CC: Américo Wang <xiyou.wangcong@gmail.com>