summaryrefslogtreecommitdiffstats
path: root/kernel/module.c
AgeCommit message (Collapse)AuthorFilesLines
2016-08-04Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-21/+100
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "The only interesting thing here is Jessica's patch to add ro_after_init support to modules. The rest are all trivia" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: extable.h: add stddef.h so "NULL" definition is not implicit modules: add ro_after_init support jump_label: disable preemption around __module_text_address(). exceptions: fork exception table content from module.h into extable.h modules: Add kernel parameter to blacklist modules module: Do a WARN_ON_ONCE() for assert module mutex not held Documentation/module-signing.txt: Note need for version info if reusing a key module: Invalidate signatures on force-loaded modules module: Issue warnings when tainting kernel module: fix redundant test. module: fix noreturn attribute for __module_put_and_exit()
2016-08-04modules: add ro_after_init supportJessica Yu1-12/+54
Add ro_after_init support for modules by adding a new page-aligned section in the module layout (after rodata) for ro_after_init data and enabling RO protection for that section after module init runs. Signed-off-by: Jessica Yu <jeyu@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-08-04modules: Add kernel parameter to blacklist modulesPrarit Bhargava1-0/+24
Blacklisting a module in linux has long been a problem. The current procedure is to use rd.blacklist=module_name, however, that doesn't cover the case after the initramfs and before a boot prompt (where one is supposed to use /etc/modprobe.d/blacklist.conf to blacklist runtime loading). Using rd.shell to get an early prompt is hit-or-miss, and doesn't cover all situations AFAICT. This patch adds this functionality of permanently blacklisting a module by its name via the kernel parameter module_blacklist=module_name. [v2]: Rusty, use core_param() instead of __setup() which simplifies things. [v3]: Rusty, undo wreckage from strsep() [v4]: Rusty, simpler version of blacklisted() Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-doc@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-08-04module: Do a WARN_ON_ONCE() for assert module mutex not heldSteven Rostedt1-1/+1
When running with lockdep enabled, I triggered the WARN_ON() in the module code that asserts when module_mutex or rcu_read_lock_sched are not held. The issue I have is that this can also be called from the dump_stack() code, causing us to enter an infinite loop... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at kernel/module.c:268 module_assert_mutex_or_preempt+0x3c/0x3e Modules linked in: ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.7.0-rc3-test-00013-g501c2375253c #14 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 ffff880215e8fa70 ffff880215e8fa70 ffffffff812fc8e3 0000000000000000 ffffffff81d3e55b ffff880215e8fac0 ffffffff8104fc88 ffffffff8104fcab 0000000915e88300 0000000000000046 ffffffffa019b29a 0000000000000001 Call Trace: [<ffffffff812fc8e3>] dump_stack+0x67/0x90 [<ffffffff8104fc88>] __warn+0xcb/0xe9 [<ffffffff8104fcab>] ? warn_slowpath_null+0x5/0x1f ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at kernel/module.c:268 module_assert_mutex_or_preempt+0x3c/0x3e Modules linked in: ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.7.0-rc3-test-00013-g501c2375253c #14 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 ffff880215e8f7a0 ffff880215e8f7a0 ffffffff812fc8e3 0000000000000000 ffffffff81d3e55b ffff880215e8f7f0 ffffffff8104fc88 ffffffff8104fcab 0000000915e88300 0000000000000046 ffffffffa019b29a 0000000000000001 Call Trace: [<ffffffff812fc8e3>] dump_stack+0x67/0x90 [<ffffffff8104fc88>] __warn+0xcb/0xe9 [<ffffffff8104fcab>] ? warn_slowpath_null+0x5/0x1f ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at kernel/module.c:268 module_assert_mutex_or_preempt+0x3c/0x3e Modules linked in: ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.7.0-rc3-test-00013-g501c2375253c #14 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 ffff880215e8f4d0 ffff880215e8f4d0 ffffffff812fc8e3 0000000000000000 ffffffff81d3e55b ffff880215e8f520 ffffffff8104fc88 ffffffff8104fcab 0000000915e88300 0000000000000046 ffffffffa019b29a 0000000000000001 Call Trace: [<ffffffff812fc8e3>] dump_stack+0x67/0x90 [<ffffffff8104fc88>] __warn+0xcb/0xe9 [<ffffffff8104fcab>] ? warn_slowpath_null+0x5/0x1f ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at kernel/module.c:268 module_assert_mutex_or_preempt+0x3c/0x3e [...] Which gives us rather useless information. Worse yet, there's some race that causes this, and I seldom trigger it, so I have no idea what happened. This would not be an issue if that warning was a WARN_ON_ONCE(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-08-02dynamic_debug: only add header when usedLuis de Bethencourt1-0/+1
kernel.h header doesn't directly use dynamic debug, instead we can include it in module.c (which used it via kernel.h). printk.h only uses it if CONFIG_DYNAMIC_DEBUG is on, changing the inclusion to only happen in that case. Link: http://lkml.kernel.org/r/1468429793-16917-1-git-send-email-luisbg@osg.samsung.com [luisbg@osg.samsung.com: include dynamic_debug.h in drb_int.h] Link: http://lkml.kernel.org/r/1468447828-18558-2-git-send-email-luisbg@osg.samsung.com Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27module: Invalidate signatures on force-loaded modulesBen Hutchings1-4/+9
Signing a module should only make it trusted by the specific kernel it was built for, not anything else. Loading a signed module meant for a kernel with a different ABI could have interesting effects. Therefore, treat all signatures as invalid when a module is force-loaded. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-07-27module: Issue warnings when tainting kernelLibor Pechacek1-1/+10
While most of the locations where a kernel taint bit is set are accompanied with a warning message, there are two which set their bits silently. If the tainting module gets unloaded later on, it is almost impossible to tell what was the reason for setting the flag. Signed-off-by: Libor Pechacek <lpechacek@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-07-27module: fix redundant test.Rusty Russell1-2/+1
[linux-4.5-rc4/kernel/module.c:1692]: (style) Redundant condition: attr.test. '!attr.test || (attr.test && attr.test(mod))' is equivalent to '!attr.test || attr.test(mod)' This code was added like this ten years ago, in c988d2b284549 "modules: add version and srcversion to sysfs". Reported-by: David Binderman <dcb314@hotmail.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-07-27module: fix noreturn attribute for __module_put_and_exit()Jiri Kosina1-1/+1
__module_put_and_exit() is makred noreturn in module.h declaration, but is lacking the attribute in the definition, which makes some tools (such as sparse) unhappy. Amend the definition with the attribute as well (and reformat the declaration so that it uses more common format). Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-04-01module: preserve Elf information for livepatch modulesJessica Yu1-3/+122
For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-17Merge branch 'for-linus' of ↵Linus Torvalds1-8/+28
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching update from Jiri Kosina: - cleanup of module notifiers; this depends on a module.c cleanup which has been acked by Rusty; from Jessica Yu - small assorted fixes and MAINTAINERS update * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch/module: remove livepatch module notifier modules: split part of complete_formation() into prepare_coming_module() livepatch: Update maintainers livepatch: Fix the error message about unresolvable ambiguity klp: remove CONFIG_LIVEPATCH dependency from klp headers klp: remove superfluous errors in asm/livepatch.h
2016-03-17Merge branch 'next' of ↵Linus Torvalds1-60/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer updates from James Morris: "There are a bunch of fixes to the TPM, IMA, and Keys code, with minor fixes scattered across the subsystem. IMA now requires signed policy, and that policy is also now measured and appraised" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (67 commits) X.509: Make algo identifiers text instead of enum akcipher: Move the RSA DER encoding check to the crypto layer crypto: Add hash param to pkcs1pad sign-file: fix build with CMS support disabled MAINTAINERS: update tpmdd urls MODSIGN: linux/string.h should be #included to get memcpy() certs: Fix misaligned data in extra certificate list X.509: Handle midnight alternative notation in GeneralizedTime X.509: Support leap seconds Handle ISO 8601 leap seconds and encodings of midnight in mktime64() X.509: Fix leap year handling again PKCS#7: fix unitialized boolean 'want' firmware: change kernel read fail to dev_dbg() KEYS: Use the symbol value for list size, updated by scripts/insert-sys-cert KEYS: Reserve an extra certificate symbol for inserting without recompiling modsign: hide openssl output in silent builds tpm_tis: fix build warning with tpm_tis_resume ima: require signed IMA policy ima: measure and appraise the IMA policy itself ima: load policy using path ...
2016-03-17livepatch/module: remove livepatch module notifierJessica Yu1-0/+10
Remove the livepatch module notifier in favor of directly enabling and disabling patches to modules in the module loader. Hard-coding the function calls ensures that ftrace_module_enable() is run before klp_module_coming() during module load, and that klp_module_going() is run before ftrace_release_mod() during module unload. This way, ftrace and livepatch code is run in the correct order during the module load/unload sequence without dependence on the module notifier call chain. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-17modules: split part of complete_formation() into prepare_coming_module()Jessica Yu1-8/+18
Put all actions in complete_formation() that are performed after module->state is set to MODULE_STATE_COMING into a separate function prepare_coming_module(). This split prepares for the removal of the livepatch module notifiers in favor of hard-coding function calls to klp_module_{coming,going} in the module loader. The complete_formation -> prepare_coming_module split will also make error handling easier since we can jump to the appropriate error label to do any module GOING cleanup after all the COMING-actions have completed. Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.cz> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-21module: replace copy_module_from_fd with kernel versionMimi Zohar1-60/+8
Replace copy_module_from_fd() with kernel_read_file_from_fd(). Although none of the upstreamed LSMs define a kernel_module_from_file hook, IMA is called, based on policy, to prevent unsigned kernel modules from being loaded by the original kernel module syscall and to measure/appraise signed kernel modules. The security function security_kernel_module_from_file() was called prior to reading a kernel module. Preventing unsigned kernel modules from being loaded by the original kernel module syscall remains on the pre-read kernel_read_file() security hook. Instead of reading the kernel module twice, once for measuring/appraising and again for loading the kernel module, the signature validation is moved to the kernel_post_read_file() security hook. This patch removes the security_kernel_module_from_file() hook and security call. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au>
2016-02-18Merge branch 'for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching fixes from Jiri Kosina: - regression (from 4.4) fix for ordering issue, introduced by an earlier ftrace change, that broke live patching of modules. The fix replaces the ftrace module notifier by direct call in order to make the ordering guaranteed and well-defined. The patch, from Jessica Yu, has been acked both by Steven and Rusty - error message fix from Miroslav Benes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: ftrace/module: remove ftrace module notifier livepatch: change the error message in asm/livepatch.h header files
2016-02-17ftrace/module: remove ftrace module notifierJessica Yu1-0/+4
Remove the ftrace module notifier in favor of directly calling ftrace_module_enable() and ftrace_release_mod() in the module loader. Hard-coding the function calls directly in the module loader removes dependence on the module notifier call chain and provides better visibility and control over what gets called when, which is important to kernel utilities such as livepatch. This fixes a notifier ordering issue in which the ftrace module notifier (and hence ftrace_module_enable()) for coming modules was being called after klp_module_notify(), which caused livepatch modules to initialize incorrectly. This patch removes dependence on the module notifier call chain in favor of hard coding the corresponding function calls in the module loader. This ensures that ftrace and livepatch code get called in the correct order on patch module load and unload. Fixes: 5156dca34a3e ("ftrace: Fix the race between ftrace and insmod") Signed-off-by: Jessica Yu <jeyu@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Petr Mladek <pmladek@suse.cz> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-03modules: fix longstanding /proc/kallsyms vs module insertion race.Rusty Russell1-43/+69
For CONFIG_KALLSYMS, we keep two symbol tables and two string tables. There's one full copy, marked SHF_ALLOC and laid out at the end of the module's init section. There's also a cut-down version that only contains core symbols and strings, and lives in the module's core section. After module init (and before we free the module memory), we switch the mod->symtab, mod->num_symtab and mod->strtab to point to the core versions. We do this under the module_mutex. However, kallsyms doesn't take the module_mutex: it uses preempt_disable() and rcu tricks to walk through the modules, because it's used in the oops path. It's also used in /proc/kallsyms. There's nothing atomic about the change of these variables, so we can get the old (larger!) num_symtab and the new symtab pointer; in fact this is what I saw when trying to reproduce. By grouping these variables together, we can use a carefully-dereferenced pointer to ensure we always get one or the other (the free of the module init section is already done in an RCU callback, so that's safe). We allocate the init one at the end of the module init section, and keep the core one inside the struct module itself (it could also have been allocated at the end of the module core, but that's probably overkill). Reported-by: Weilong Chen <chenweilong@huawei.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111541 Cc: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-02-03module: wrapper for symbol name.Rusty Russell1-11/+15
This trivial wrapper adds clarity and makes the following patch smaller. Cc: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-02-03modules: fix modparam async_probe requestLuis R. Rodriguez1-1/+1
Commit f2411da746985 ("driver-core: add driver module asynchronous probe support") added async probe support, in two forms: * in-kernel driver specification annotation * generic async_probe module parameter (modprobe foo async_probe) To support the generic kernel parameter parse_args() was extended via commit ecc8617053e0 ("module: add extra argument for parse_params() callback") however commit failed to f2411da746985 failed to add the required argument. This causes a crash then whenever async_probe generic module parameter is used. This was overlooked when the form in which in-kernel async probe support was reworked a bit... Fix this as originally intended. Cc: Hannes Reinecke <hare@suse.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: stable@vger.kernel.org (4.2+) Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> [minimized]
2016-01-14Merge branch 'for-linus' of ↵Linus Torvalds1-184/+165
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching updates from Jiri Kosina: - RO/NX attribute fixes for patch module relocations from Josh Poimboeuf. As part of this effort, module.c has been cleaned up as well and livepatching is piggy-backing on this cleanup. Rusty is OK with this whole lot going through livepatching tree. - symbol disambiguation support from Chris J Arges. That series is also Reviewed-by: Miroslav Benes <mbenes@suse.cz> but this came in only after I've alredy pushed out. Didn't want to rebase because of that, hence I am mentioning it here. - symbol lookup fix from Miroslav Benes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Cleanup module page permission changes module: keep percpu symbols in module's symtab module: clean up RO/NX handling. module: use a structure to encapsulate layout. gcov: use within_module() helper. module: Use the same logic for setting and unsetting RO/NX livepatch: function,sympos scheme in livepatch sysfs directory livepatch: add sympos as disambiguator field to klp_reloc livepatch: add old_sympos as disambiguator field to klp_func
2016-01-07ftrace/module: Call clean up function when module init fails earlySteven Rostedt (Red Hat)1-0/+6
If the module init code fails after calling ftrace_module_init() and before calling do_init_module(), we can suffer from a memory leak. This is because ftrace_module_init() allocates pages to store the locations that ftrace hooks are placed in the module text. If do_init_module() fails, it still calls the MODULE_GOING notifiers which will tell ftrace to do a clean up of the pages it allocated for the module. But if load_module() fails before then, the pages allocated by ftrace_module_init() will never be freed. Call ftrace_release_mod() on the module if load_module() fails before getting to do_init_module(). Link: http://lkml.kernel.org/r/567CEA31.1070507@intel.com Reported-by: "Qiu, PeiyangX" <peiyangx.qiu@intel.com> Fixes: a949ae560a511 "ftrace/module: Hardcode ftrace_module_init() call into load_module()" Cc: stable@vger.kernel.org # v2.6.38+ Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-12-04module: keep percpu symbols in module's symtabMiroslav Benes1-4/+11
Currently, percpu symbols from .data..percpu ELF section of a module are not copied over and stored in final symtab array of struct module. Consequently such symbol cannot be returned via kallsyms API (for example kallsyms_lookup_name). This can be especially confusing when the percpu symbol is exported. Only its __ksymtab et al. are present in its symtab. The culprit is in layout_and_allocate() function where SHF_ALLOC flag is dropped for .data..percpu section. There is in fact no need to copy the section to final struct module, because kernel module loader allocates extra percpu section by itself. Unfortunately only symbols from SHF_ALLOC sections are copied due to a check in is_core_symbol(). The patch changes is_core_symbol() function to copy over also percpu symbols (their st_shndx points to .data..percpu ELF section). We do it only if CONFIG_KALLSYMS_ALL is set to be consistent with the rest of the function (ELF section is SHF_ALLOC but !SHF_EXECINSTR). Finally elf_type() returns type 'a' for a percpu symbol because its address is absolute. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-04module: clean up RO/NX handling.Rusty Russell1-91/+77
Modules have three sections: text, rodata and writable data. The code handled the case where these overlapped, however they never can: debug_align() ensures they are always page-aligned. This is why we got away with manually traversing the pages in set_all_modules_text_rw() without rounding. We create three helper functions: frob_text(), frob_rodata() and frob_writable_data(). We then call these explicitly at every point, so it's clear what we're doing. We also expose module_enable_ro() and module_disable_ro() for livepatch to use. Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-04module: use a structure to encapsulate layout.Rusty Russell1-107/+92
Makes it easier to handle init vs core cleanly, though the change is fairly invasive across random architectures. It simplifies the rbtree code immediately, however, while keeping the core data together in the same cachline (now iff the rbtree code is enabled). Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-04module: Use the same logic for setting and unsetting RO/NXJosh Poimboeuf1-27/+30
When setting a module's RO and NX permissions, set_section_ro_nx() is used, but when clearing them, unset_module_{init,core}_ro_nx() are used. The unset functions don't have the same checks the set function has for partial page protections. It's probably harmless, but it's still confusingly asymmetrical. Instead, use the same logic to do both. Also add some new set_module_{init,core}_ro_nx() helper functions for more symmetry with the unset functions. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-24module: Fix locking in symbol_put_addr()Peter Zijlstra1-2/+6
Poma (on the way to another bug) reported an assertion triggering: [<ffffffff81150529>] module_assert_mutex_or_preempt+0x49/0x90 [<ffffffff81150822>] __module_address+0x32/0x150 [<ffffffff81150956>] __module_text_address+0x16/0x70 [<ffffffff81150f19>] symbol_put_addr+0x29/0x40 [<ffffffffa04b77ad>] dvb_frontend_detach+0x7d/0x90 [dvb_core] Laura Abbott <labbott@redhat.com> produced a patch which lead us to inspect symbol_put_addr(). This function has a comment claiming it doesn't need to disable preemption around the module lookup because it holds a reference to the module it wants to find, which therefore cannot go away. This is wrong (and a false optimization too, preempt_disable() is really rather cheap, and I doubt any of this is on uber critical paths, otherwise it would've retained a pointer to the actual module anyway and avoided the second lookup). While its true that the module cannot go away while we hold a reference on it, the data structure we do the lookup in very much _CAN_ change while we do the lookup. Therefore fix the comment and add the required preempt_disable(). Reported-by: poma <pomidorabelisima@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Fixes: a6e6abd575fc ("module: remove module_text_address()") Cc: stable@kernel.org
2015-07-29module: weaken locking assertion for oops path.Rusty Russell1-2/+6
We don't actually hold the module_mutex when calling find_module_all from module_kallsyms_lookup_name: that's because it's used by the oops code and we don't want to deadlock. However, access to the list read-only is safe if preempt is disabled, so we can weaken the assertion. Keep a strong version for external callers though. Fixes: 0be964be0d45 ("module: Sanitize RCU usage and locking") Reported-by: He Kuang <hekuang@huawei.com> Cc: stable@kernel.org Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-07-09module: Fix load_module() error pathPeter Zijlstra1-0/+1
The load_module() error path frees a module but forgot to take it out of the mod_tree, leaving a dangling entry in the tree, causing havoc. Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: Arthur Marsh <arthur.marsh@internode.on.net> Tested-by: Arthur Marsh <arthur.marsh@internode.on.net> Fixes: 93c2e105f6bc ("module: Optimize __module_address() using a latched RB-tree") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-07-01Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-76/+233
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...
2015-06-28param: fix module param locks when !CONFIG_SYSFS.Rusty Russell1-1/+8
As Dan Streetman points out, the entire point of locking for is to stop sysfs accesses, so they're elided entirely in the !SYSFS case. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-26Merge tag 'driver-core-4.2-rc1' of ↵Linus Torvalds1-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the driver core / firmware changes for 4.2-rc1. A number of small changes all over the place in the driver core, and in the firmware subsystem. Nothing really major, full details in the shortlog. Some of it is a bit of churn, given that the platform driver probing changes was found to not work well, so they were reverted. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits) Revert "base/platform: Only insert MEM and IO resources" Revert "base/platform: Continue on insert_resource() error" Revert "of/platform: Use platform_device interface" Revert "base/platform: Remove code duplication" firmware: add missing kfree for work on async call fs: sysfs: don't pass count == 0 to bin file readers base:dd - Fix for typo in comment to function driver_deferred_probe_trigger(). base/platform: Remove code duplication of/platform: Use platform_device interface base/platform: Continue on insert_resource() error base/platform: Only insert MEM and IO resources firmware: use const for remaining firmware names firmware: fix possible use after free on name on asynchronous request firmware: check for file truncation on direct firmware loading firmware: fix __getname() missing failure check drivers: of/base: move of_init to driver_init drivers/base: cacheinfo: fix annoying typo when DT nodes are absent sysfs: disambiguate between "error code" and "failure" in comments driver-core: fix build for !CONFIG_MODULES driver-core: make __device_attach() static ...
2015-06-26Merge tag 'trace-v4.2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This patch series contains several clean ups and even a new trace clock "monitonic raw". Also some enhancements to make the ring buffer even faster. But the biggest and most noticeable change is the renaming of the ftrace* files, structures and variables that have to deal with trace events. Over the years I've had several developers tell me about their confusion with what ftrace is compared to events. Technically, "ftrace" is the infrastructure to do the function hooks, which include tracing and also helps with live kernel patching. But the trace events are a separate entity altogether, and the files that affect the trace events should not be named "ftrace". These include: include/trace/ftrace.h -> include/trace/trace_events.h include/linux/ftrace_event.h -> include/linux/trace_events.h Also, functions that are specific for trace events have also been renamed: ftrace_print_*() -> trace_print_*() (un)register_ftrace_event() -> (un)register_trace_event() ftrace_event_name() -> trace_event_name() ftrace_trigger_soft_disabled() -> trace_trigger_soft_disabled() ftrace_define_fields_##call() -> trace_define_fields_##call() ftrace_get_offsets_##call() -> trace_get_offsets_##call() Structures have been renamed: ftrace_event_file -> trace_event_file ftrace_event_{call,class} -> trace_event_{call,class} ftrace_event_buffer -> trace_event_buffer ftrace_subsystem_dir -> trace_subsystem_dir ftrace_event_raw_##call -> trace_event_raw_##call ftrace_event_data_offset_##call-> trace_event_data_offset_##call ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call And a few various variables and flags have also been updated. This has been sitting in linux-next for some time, and I have not heard a single complaint about this rename breaking anything. Mostly because these functions, variables and structures are mostly internal to the tracing system and are seldom (if ever) used by anything external to that" * tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) ring_buffer: Allow to exit the ring buffer benchmark immediately ring-buffer-benchmark: Fix the wrong type ring-buffer-benchmark: Fix the wrong param in module_param ring-buffer: Add enum names for the context levels ring-buffer: Remove useless unused tracing_off_permanent() ring-buffer: Give NMIs a chance to lock the reader_lock ring-buffer: Add trace_recursive checks to ring_buffer_write() ring-buffer: Allways do the trace_recursive checks ring-buffer: Move recursive check to per_cpu descriptor ring-buffer: Add unlikelys to make fast path the default tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call() tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call() tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled() tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_* tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir tracing: Rename ftrace_event_name() to trace_event_name() tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX ...
2015-06-23module: add per-module param_lockDan Streetman1-0/+2
Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-08Merge 4.1-rc7 into driver-core-nextGreg Kroah-Hartman1-0/+3
We want the fixes in this branch as well for testing and merge resolution. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-28kernel/module.c: avoid ifdefs for sig_enforce declarationLuis R. Rodriguez1-7/+2
There's no need to require an ifdef over the declaration of sig_enforce as IS_ENABLED() can be used. While at it, there's no harm in exposing this kernel parameter outside of CONFIG_MODULE_SIG as it'd be a no-op on non module sig kernels. Now, technically we should in theory be able to remove the #ifdef'ery over the declaration of the module parameter as we are also trusting the bool_enable_only code for CONFIG_MODULE_SIG kernels but for now remain paranoid and keep it. With time if no one can put a bullet through bool_enable_only and if there are no technical requirements over not exposing CONFIG_MODULE_SIG_FORCE with the measures in place by bool_enable_only we could remove this last ifdef. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: cocci@systeme.lip6.fr Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28kernel/params.c: generalize bool_enable_onlyLuis R. Rodriguez1-31/+0
This takes out the bool_enable_only implementation from the module loading code and generalizes it so that others can make use of it. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: cocci@systeme.lip6.fr Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28kernel/module.c: use generic module param operaters for sig_enforceLuis R. Rodriguez1-7/+9
We're directly checking and modifying sig_enforce when needed instead of using the generic helpers. This prevents us from generalizing this helper so that others can use it. Use indirect helpers to allow us to generalize this code a bit and to make it a bit more clear what this is doing. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: cocci@systeme.lip6.fr Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28module: Rework module_addr_{min,max}Peter Zijlstra1-28/+52
__module_address() does an initial bound check before doing the {list/tree} iteration to find the actual module. The bound variables are nowhere near the mod_tree cacheline, in fact they're nowhere near one another. module_addr_min lives in .data while module_addr_max lives in .bss (smarty pants GCC thinks the explicit 0 assignment is a mistake). Rectify this by moving the two variables into a structure together with the latch_tree_root to guarantee they all share the same cacheline and avoid hitting two extra cachelines for the lookup. While reworking the bounds code, move the bound update from allocation to insertion time, this avoids updating the bounds for a few error paths. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28module: Use __module_address() for module_address_lookup()Peter Zijlstra1-10/+7
Use the generic __module_address() addr to struct module lookup instead of open coding it once more. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACINGPeter Zijlstra1-2/+28
Andrew worried about the overhead on small systems; only use the fancy code when either perf or tracing is enabled. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Requested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28module: Optimize __module_address() using a latched RB-treePeter Zijlstra1-5/+110
Currently __module_address() is using a linear search through all modules in order to find the module corresponding to the provided address. With a lot of modules this can take a lot of time. One of the users of this is kernel_text_address() which is employed in many stack unwinders; which in turn are used by perf-callchain and ftrace (possibly from NMI context). So by optimizing __module_address() we optimize many stack unwinders which are used by both perf and tracing in performance sensitive code. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28module: Sanitize RCU usage and lockingPeter Zijlstra1-8/+32
Currently the RCU usage in module is an inconsistent mess of RCU and RCU-sched, this is broken for CONFIG_PREEMPT where synchronize_rcu() does not imply synchronize_sched(). Most usage sites use preempt_{dis,en}able() which is RCU-sched, but (most of) the modification sites use synchronize_rcu(). With the exception of the module bug list, which actually uses RCU. Convert everything over to RCU-sched. Furthermore add lockdep asserts to all sites, because it's not at all clear to me the required locking is observed, esp. on exported functions. Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-27module: Annotate module version magicPeter Zijlstra1-3/+9
Due to the new lockdep checks in the coming patch, we go: [ 9.759380] ------------[ cut here ]------------ [ 9.759389] WARNING: CPU: 31 PID: 597 at ../kernel/module.c:216 each_symbol_section+0x121/0x130() [ 9.759391] Modules linked in: [ 9.759393] CPU: 31 PID: 597 Comm: modprobe Not tainted 4.0.0-rc1+ #65 [ 9.759393] Hardware name: Intel Corporation S2600GZ/S2600GZ, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 [ 9.759396] ffffffff817d8676 ffff880424567ca8 ffffffff8157e98b 0000000000000001 [ 9.759398] 0000000000000000 ffff880424567ce8 ffffffff8105fbc7 ffff880424567cd8 [ 9.759400] 0000000000000000 ffffffff810ec160 ffff880424567d40 0000000000000000 [ 9.759400] Call Trace: [ 9.759407] [<ffffffff8157e98b>] dump_stack+0x4f/0x7b [ 9.759410] [<ffffffff8105fbc7>] warn_slowpath_common+0x97/0xe0 [ 9.759412] [<ffffffff810ec160>] ? section_objs+0x60/0x60 [ 9.759414] [<ffffffff8105fc2a>] warn_slowpath_null+0x1a/0x20 [ 9.759415] [<ffffffff810ed9c1>] each_symbol_section+0x121/0x130 [ 9.759417] [<ffffffff810eda01>] find_symbol+0x31/0x70 [ 9.759420] [<ffffffff810ef5bf>] load_module+0x20f/0x2660 [ 9.759422] [<ffffffff8104ef10>] ? __do_page_fault+0x190/0x4e0 [ 9.759426] [<ffffffff815880ec>] ? retint_restore_args+0x13/0x13 [ 9.759427] [<ffffffff815880ec>] ? retint_restore_args+0x13/0x13 [ 9.759433] [<ffffffff810ae73d>] ? trace_hardirqs_on_caller+0x11d/0x1e0 [ 9.759437] [<ffffffff812fcc0e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 9.759439] [<ffffffff815880ec>] ? retint_restore_args+0x13/0x13 [ 9.759441] [<ffffffff810f1ade>] SyS_init_module+0xce/0x100 [ 9.759443] [<ffffffff81587429>] system_call_fastpath+0x12/0x17 [ 9.759445] ---[ end trace 9294429076a9c644 ]--- As per the comment this site should be fine, but lets wrap it in preempt_disable() anyhow to placate lockdep. Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-20driver-core: add driver module asynchronous probe supportLuis R. Rodriguez1-2/+10
Some init systems may wish to express the desire to have device drivers run their probe() code asynchronously. This implements support for this and allows userspace to request async probe as a preference through a generic shared device driver module parameter, async_probe. Implementation for async probe is supported through a module parameter given that since synchronous probe has been prevalent for years some userspace might exist which relies on the fact that the device driver will probe synchronously and the assumption that devices it provides will be immediately available after this. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-20module: add extra argument for parse_params() callbackLuis R. Rodriguez1-2/+4
This adds an extra argument onto parse_params() to be used as a way to make the unused callback a bit more useful and generic by allowing the caller to pass on a data structure of its choice. An example use case is to allow us to easily make module parameters for every module which we will do next. @ parse @ identifier name, args, params, num, level_min, level_max; identifier unknown, param, val, doing; type s16; @@ extern char *parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, s16 level_min, s16 level_max, + void *arg, int (*unknown)(char *param, char *val, const char *doing + , void *arg )); @ parse_mod @ identifier name, args, params, num, level_min, level_max; identifier unknown, param, val, doing; type s16; @@ char *parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, s16 level_min, s16 level_max, + void *arg, int (*unknown)(char *param, char *val, const char *doing + , void *arg )) { ... } @ parse_args_found @ expression R, E1, E2, E3, E4, E5, E6; identifier func; @@ ( R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, func); | R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, &func); | R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, NULL); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, func); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, &func); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, NULL); ) @ parse_args_unused depends on parse_args_found @ identifier parse_args_found.func; @@ int func(char *param, char *val, const char *unused + , void *arg ) { ... } @ mod_unused depends on parse_args_found @ identifier parse_args_found.func; expression A1, A2, A3; @@ - func(A1, A2, A3); + func(A1, A2, A3, NULL); Generated-by: Coccinelle SmPL Cc: cocci@systeme.lip6.fr Cc: Tejun Heo <tj@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Ewan Milne <emilne@redhat.com> Cc: Jean Delvare <jdelvare@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Cc: linux-kernel@vger.kernel.org Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13tracing: Rename ftrace_event.h to trace_events.hSteven Rostedt (Red Hat)1-1/+1
The term "ftrace" is really the infrastructure of the function hooks, and not the trace events. Rename ftrace_event.h to trace_events.h to represent the trace_event infrastructure and decouple the term ftrace from it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-09module: Call module notifier on failure after complete_formation()Steven Rostedt1-0/+3
The module notifier call chain for MODULE_STATE_COMING was moved up before the parsing of args, into the complete_formation() call. But if the module failed to load after that, the notifier call chain for MODULE_STATE_GOING was never called and that prevented the users of those call chains from cleaning up anything that was allocated. Link: http://lkml.kernel.org/r/554C52B9.9060700@gmail.com Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Fixes: 4982223e51e8 "module: set nx before marking module MODULE_STATE_COMING" Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-22Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Quentin opened a can of worms by adding extable entry checking to modpost, but most architectures seem fixed now. Thanks to all involved. Last minute rebase because I noticed a "[PATCH]" had snuck into a commit message somehow" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: modpost: don't emit section mismatch warnings for compiler optimizations modpost: expand pattern matching to support substring matches modpost: do not try to match the SHT_NUL section. modpost: fix extable entry size calculation. modpost: fix inverted logic in is_extable_fault_address(). modpost: handle -ffunction-sections modpost: Whitelist .text.fixup and .exception.text params: handle quotes properly for values not of form foo="bar". modpost: document the use of struct section_check. modpost: handle relocations mismatch in __ex_table. scripts: add check_extable.sh script. modpost: mismatch_handler: retrieve tosym information only when needed. modpost: factorize symbol pretty print in get_pretty_name(). modpost: add handler function pointer to sectioncheck. modpost: add .sched.text and .kprobes.text to the TEXT_SECTIONS list. modpost: add strict white-listing when referencing sections. module: do not print allocation-fail warning on bogus user buffer size kernel/module.c: fix typos in message about unused symbols
2015-04-14Merge tag 'trace-v4.1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Some clean ups and small fixes, but the biggest change is the addition of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints. Tracepoints have helper functions for the TP_printk() called __print_symbolic() and __print_flags() that lets a numeric number be displayed as a a human comprehensible text. What is placed in the TP_printk() is also shown in the tracepoint format file such that user space tools like perf and trace-cmd can parse the binary data and express the values too. Unfortunately, the way the TRACE_EVENT() macro works, anything placed in the TP_printk() will be shown pretty much exactly as is. The problem arises when enums are used. That's because unlike macros, enums will not be changed into their values by the C pre-processor. Thus, the enum string is exported to the format file, and this makes it useless for user space tools. The TRACE_DEFINE_ENUM() solves this by converting the enum strings in the TP_printk() format into their number, and that is what is shown to user space. For example, the tracepoint tlb_flush currently has this in its format file: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) After adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); Its format file will contain this: __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" })" * tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits) tracing: Add enum_map file to show enums that have been mapped writeback: Export enums used by tracepoint to user space v4l: Export enums used by tracepoints to user space SUNRPC: Export enums in tracepoints to user space mm: tracing: Export enums in tracepoints to user space irq/tracing: Export enums in tracepoints to user space f2fs: Export the enums in the tracepoints to userspace net/9p/tracing: Export enums in tracepoints to userspace x86/tlb/trace: Export enums in used by tlb_flush tracepoint tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM() tracing: Allow for modules to convert their enums to values tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation tracing: Give system name a pointer brcmsmac: Move each system tracepoints to their own header iwlwifi: Move each system tracepoints to their own header mac80211: Move message tracepoints to their own header tracing: Add TRACE_SYSTEM_VAR to xhci-hcd tracing: Add TRACE_SYSTEM_VAR to kvm-s390 tracing: Add TRACE_SYSTEM_VAR to intel-sst ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 14:08:13 +0000