| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
mark_wakeup_next_waiter() already disables preemption, doing so again
leaves us with an unpaired preempt_disable().
Fixes: 2a1c60299406 ("rtmutex: Deboost before waking up the top waiter")
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/1491379707.6538.2.camel@gmx.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
There was a pure ->prio comparison left in try_to_wake_rt_mutex(),
convert it to use rt_mutex_waiter_less(), noting that greater-or-equal
is not-less (both in kernel priority view).
This necessitated the introduction of cmp_task() which creates a
pointer to an unnamed stack variable of struct rt_mutex_waiter type to
compare against tasks.
With this, we can now also create and employ rt_mutex_waiter_equal().
Reviewed-and-tested-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170323150216.455584638@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
rt_mutex_waiter::prio is a copy of task_struct::prio which is updated
during the PI chain walk, such that the PI chain order isn't messed up
by (asynchronous) task state updates.
Currently rt_mutex_waiter_less() uses task state for deadline tasks;
this is broken, since the task state can, as said above, change
asynchronously, causing the RB tree order to change without actual
tree update -> FAIL.
Fix this by also copying the deadline into the rt_mutex_waiter state
and updating it along with its prio field.
Ideally we would also force PI chain updates whenever DL tasks update
their deadline parameter, but for first approximation this is less
broken than it was.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170323150216.403992539@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
With the introduction of SCHED_DEADLINE the whole notion that priority
is a single number is gone, therefore the @prio argument to
rt_mutex_setprio() doesn't make sense anymore.
So rework the code to pass a pi_task instead.
Note this also fixes a problem with pi_top_task caching; previously we
would not set the pointer (call rt_mutex_update_top_task) if the
priority didn't change, this could lead to a stale pointer.
As for the XXX, I think its fine to use pi_task->prio, because if it
differs from waiter->prio, a PI chain update is immenent.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170323150216.303827095@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Previous patches changed the meaning of the return value of
rt_mutex_slowunlock(); update comments and code to reflect this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170323150216.255058238@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Currently dl tasks will actually return at the very beginning
of rt_mutex_adjust_prio_chain() in !detect_deadlock cases:
if (waiter->prio == task->prio) {
if (!detect_deadlock)
goto out_unlock_pi; // out here
else
requeue = false;
}
As the deadline value of blocked deadline tasks(waiters) without
changing their sched_class(thus prio doesn't change) never changes,
this seems reasonable, but it actually misses the chance of updating
rt_mutex_waiter's "dl_runtime(period)_copy" if a waiter updates its
deadline parameters(dl_runtime, dl_period) or boosted waiter changes
to !deadline class.
Thus, force deadline task not out by adding the !dl_prio() condition.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/1460633827-345-7-git-send-email-xlpang@redhat.com
Link: http://lkml.kernel.org/r/20170323150216.206577901@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
A crash happened while I was playing with deadline PI rtmutex.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: [<ffffffff810eeb8f>] rt_mutex_get_top_task+0x1f/0x30
PGD 232a75067 PUD 230947067 PMD 0
Oops: 0000 [#1] SMP
CPU: 1 PID: 10994 Comm: a.out Not tainted
Call Trace:
[<ffffffff810b658c>] enqueue_task+0x2c/0x80
[<ffffffff810ba763>] activate_task+0x23/0x30
[<ffffffff810d0ab5>] pull_dl_task+0x1d5/0x260
[<ffffffff810d0be6>] pre_schedule_dl+0x16/0x20
[<ffffffff8164e783>] __schedule+0xd3/0x900
[<ffffffff8164efd9>] schedule+0x29/0x70
[<ffffffff8165035b>] __rt_mutex_slowlock+0x4b/0xc0
[<ffffffff81650501>] rt_mutex_slowlock+0xd1/0x190
[<ffffffff810eeb33>] rt_mutex_timed_lock+0x53/0x60
[<ffffffff810ecbfc>] futex_lock_pi.isra.18+0x28c/0x390
[<ffffffff810ed8b0>] do_futex+0x190/0x5b0
[<ffffffff810edd50>] SyS_futex+0x80/0x180
This is because rt_mutex_enqueue_pi() and rt_mutex_dequeue_pi()
are only protected by pi_lock when operating pi waiters, while
rt_mutex_get_top_task(), will access them with rq lock held but
not holding pi_lock.
In order to tackle it, we introduce new "pi_top_task" pointer
cached in task_struct, and add new rt_mutex_update_top_task()
to update its value, it can be called by rt_mutex_setprio()
which held both owner's pi_lock and rq lock. Thus "pi_top_task"
can be safely accessed by enqueue_task_dl() under rq lock.
Originally-From: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170323150216.157682758@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
We should deboost before waking the high-priority task, such that we
don't run two tasks with the same "state" (priority, deadline,
sched_class, etc).
In order to make sure the boosting task doesn't start running between
unlock and deboost (due to 'spurious' wakeup), we move the deboost
under the wait_lock, that way its serialized against the wait loop in
__rt_mutex_slowlock().
Doing the deboost early can however lead to priority-inversion if
current would get preempted after the deboost but before waking our
high-prio task, hence we disable preemption before doing deboost, and
enabling it after the wake up is over.
This gets us the right semantic order, but most importantly however;
this change ensures pointer stability for the next patch, where we
have rt_mutex_setprio() cache a pointer to the top-most waiter task.
If we, as before this change, do the wakeup first and then deboost,
this pointer might point into thin air.
[peterz: Changelog + patch munging]
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170323150216.110065320@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
When PREEMPT_RT_FULL does the spinlock -> rt_mutex substitution the PI
chain code will (falsely) report a deadlock and BUG.
The problem is that it hold hb->lock (now an rt_mutex) while doing
task_blocks_on_rt_mutex on the futex's pi_state::rtmutex. This, when
interleaved just right with futex_unlock_pi() leads it to believe to see an
AB-BA deadlock.
Task1 (holds rt_mutex, Task2 (does FUTEX_LOCK_PI)
does FUTEX_UNLOCK_PI)
lock hb->lock
lock rt_mutex (as per start_proxy)
lock hb->lock
Which is a trivial AB-BA.
It is not an actual deadlock, because it won't be holding hb->lock by the
time it actually blocks on the rt_mutex, but the chainwalk code doesn't
know that and it would be a nightmare to handle this gracefully.
To avoid this problem, do the same as in futex_unlock_pi() and drop
hb->lock after acquiring wait_lock. This still fully serializes against
futex_unlock_pi(), since adding to the wait_list does the very same lock
dance, and removing it holds both locks.
Aside of solving the RT problem this makes the lock and unlock mechanism
symetric and reduces the hb->lock held time.
Reported-and-tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104152.161341537@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
By changing futex_lock_pi() to use rt_mutex_*_proxy_lock() all wait_list
modifications are done under both hb->lock and wait_lock.
This closes the obvious interleave pattern between futex_lock_pi() and
futex_unlock_pi(), but not entirely so. See below:
Before:
futex_lock_pi() futex_unlock_pi()
unlock hb->lock
lock hb->lock
unlock hb->lock
lock rt_mutex->wait_lock
unlock rt_mutex_wait_lock
-EAGAIN
lock rt_mutex->wait_lock
list_add
unlock rt_mutex->wait_lock
schedule()
lock rt_mutex->wait_lock
list_del
unlock rt_mutex->wait_lock
<idem>
-EAGAIN
lock hb->lock
After:
futex_lock_pi() futex_unlock_pi()
lock hb->lock
lock rt_mutex->wait_lock
list_add
unlock rt_mutex->wait_lock
unlock hb->lock
schedule()
lock hb->lock
unlock hb->lock
lock hb->lock
lock rt_mutex->wait_lock
list_del
unlock rt_mutex->wait_lock
lock rt_mutex->wait_lock
unlock rt_mutex_wait_lock
-EAGAIN
unlock hb->lock
It does however solve the earlier starvation/live-lock scenario which got
introduced with the -EAGAIN since unlike the before scenario; where the
-EAGAIN happens while futex_unlock_pi() doesn't hold any locks; in the
after scenario it happens while futex_unlock_pi() actually holds a lock,
and then it is serialized on that lock.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104152.062785528@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
With the ultimate goal of keeping rt_mutex wait_list and futex_q waiters
consistent it's necessary to split 'rt_mutex_futex_lock()' into finer
parts, such that only the actual blocking can be done without hb->lock
held.
Split split_mutex_finish_proxy_lock() into two parts, one that does the
blocking and one that does remove_waiter() when the lock acquire failed.
When the rtmutex was acquired successfully the waiter can be removed in the
acquisiton path safely, since there is no concurrency on the lock owner.
This means that, except for futex_lock_pi(), all wait_list modifications
are done with both hb->lock and wait_lock held.
[bigeasy@linutronix.de: fix for futex_requeue_pi_signal_restart]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104152.001659630@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Since there's already two copies of this code, introduce a helper now
before adding a third one.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.950039479@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Part of what makes futex_unlock_pi() intricate is that
rt_mutex_futex_unlock() -> rt_mutex_slowunlock() can drop
rt_mutex::wait_lock.
This means it cannot rely on the atomicy of wait_lock, which would be
preferred in order to not rely on hb->lock so much.
The reason rt_mutex_slowunlock() needs to drop wait_lock is because it can
race with the rt_mutex fastpath, however futexes have their own fast path.
Since futexes already have a bunch of separate rt_mutex accessors, complete
that set and implement a rt_mutex variant without fastpath for them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.702962446@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
These are unused and clutter up the code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.652692478@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
<linux/sched/debug.h>
We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
<linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
<linux/sched/wake_q.h>
We are going to split <linux/sched/wake_q.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/wake_q.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Running my likely/unlikely profiler for 3 weeks on two production
machines, I discovered that the unlikely() test in
__rt_mutex_slowlock() checking if state is TASK_INTERRUPTIBLE is hit
100% of the time, making it a very likely case.
The reason is, on a vanilla kernel, the majority case of calling
rt_mutex() is from the futex code. This code is always called as
TASK_INTERRUPTIBLE. In the -rt patch, this code is commonly called when
PREEMPT_RT is enabled with TASK_UNINTERRUPTIBLE. But that's not the
likely scenario.
The rt_mutex() code should be optimized for the common vanilla case,
and that is from a futex, with TASK_INTERRUPTIBLE as the state.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170119113234.1efeedd1@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
rt_mutex_proxy_unlock()/init_proxy_locked()
While debugging the unlock vs. dequeue race which resulted in state
corruption of futexes the lockless nature of rt_mutex_proxy_unlock()
caused some confusion.
Add commentry to explain why it is safe to do this lockless. Add matching
comments to rt_mutex_init_proxy_locked() for completeness sake.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20161130210030.591941927@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
David reported a futex/rtmutex state corruption. It's caused by the
following problem:
CPU0 CPU1 CPU2
l->owner=T1
rt_mutex_lock(l)
lock(l->wait_lock)
l->owner = T1 | HAS_WAITERS;
enqueue(T2)
boost()
unlock(l->wait_lock)
schedule()
rt_mutex_lock(l)
lock(l->wait_lock)
l->owner = T1 | HAS_WAITERS;
enqueue(T3)
boost()
unlock(l->wait_lock)
schedule()
signal(->T2) signal(->T3)
lock(l->wait_lock)
dequeue(T2)
deboost()
unlock(l->wait_lock)
lock(l->wait_lock)
dequeue(T3)
===> wait list is now empty
deboost()
unlock(l->wait_lock)
lock(l->wait_lock)
fixup_rt_mutex_waiters()
if (wait_list_empty(l)) {
owner = l->owner & ~HAS_WAITERS;
l->owner = owner
==> l->owner = T1
}
lock(l->wait_lock)
rt_mutex_unlock(l) fixup_rt_mutex_waiters()
if (wait_list_empty(l)) {
owner = l->owner & ~HAS_WAITERS;
cmpxchg(l->owner, T1, NULL)
===> Success (l->owner = NULL)
l->owner = owner
==> l->owner = T1
}
That means the problem is caused by fixup_rt_mutex_waiters() which does the
RMW to clear the waiters bit unconditionally when there are no waiters in
the rtmutexes rbtree.
This can be fatal: A concurrent unlock can release the rtmutex in the
fastpath because the waiters bit is not set. If the cmpxchg() gets in the
middle of the RMW operation then the previous owner, which just unlocked
the rtmutex is set as the owner again when the write takes place after the
successfull cmpxchg().
The solution is rather trivial: verify that the owner member of the rtmutex
has the waiters bit set before clearing it. This does not require a
cmpxchg() or other atomic operations because the waiters bit can only be
set and cleared with the rtmutex wait_lock held. It's also safe against the
fast path unlock attempt. The unlock attempt via cmpxchg() will either see
the bit set and take the slowpath or see the bit cleared and release it
atomically in the fastpath.
It's remarkable that the test program provided by David triggers on ARM64
and MIPS64 really quick, but it refuses to reproduce on x86-64, while the
problem exists there as well. That refusal might explain that this got not
discovered earlier despite the bug existing from day one of the rtmutex
implementation more than 10 years ago.
Thanks to David for meticulously instrumenting the code and providing the
information which allowed to decode this subtle problem.
Reported-by: David Daney <ddaney@caviumnetworks.com>
Tested-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Fixes: 23f78d4a03c5 ("[PATCH] pi-futex: rt mutex core")
Link: http://lkml.kernel.org/r/20161130210030.351136722@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently the wake_q data structure is defined by the WAKE_Q() macro.
This macro, however, looks like a function doing something as "wake" is
a verb. Even checkpatch.pl was confused as it reported warnings like
WARNING: Missing a blank line after declarations
#548: FILE: kernel/futex.c:3665:
+ int ret;
+ WAKE_Q(wake_q);
This patch renames the WAKE_Q() macro to DEFINE_WAKE_Q() which clarifies
what the macro is doing and eliminates the checkpatch.pl warnings.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1479401198-1765-1-git-send-email-longman@redhat.com
[ Resolved conflict and added missing rename. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
One warning should be enough to get one motivated to fix this. It is
possible that this happens more than once and that starts flooding the
output. Later the prints will be suppressed so we only get half of it.
Depending on the console system used it might not be helpful.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1464356838-1755-1-git-send-email-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Sasha reported a lockdep splat about a potential deadlock between RCU boosting
rtmutex and the posix timer it_lock.
CPU0 CPU1
rtmutex_lock(&rcu->rt_mutex)
spin_lock(&rcu->rt_mutex.wait_lock)
local_irq_disable()
spin_lock(&timer->it_lock)
spin_lock(&rcu->mutex.wait_lock)
--> Interrupt
spin_lock(&timer->it_lock)
This is caused by the following code sequence on CPU1
rcu_read_lock()
x = lookup();
if (x)
spin_lock_irqsave(&x->it_lock);
rcu_read_unlock();
return x;
We could fix that in the posix timer code by keeping rcu read locked across
the spinlocked and irq disabled section, but the above sequence is common and
there is no reason not to support it.
Taking rt_mutex.wait_lock irq safe prevents the deadlock.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
"The main changes in this cycle were:
- sched/fair load tracking fixes and cleanups (Byungchul Park)
- Make load tracking frequency scale invariant (Dietmar Eggemann)
- sched/deadline updates (Juri Lelli)
- stop machine fixes, cleanups and enhancements for bugs triggered by
CPU hotplug stress testing (Oleg Nesterov)
- scheduler preemption code rework: remove PREEMPT_ACTIVE and related
cleanups (Peter Zijlstra)
- Rework the sched_info::run_delay code to fix races (Peter Zijlstra)
- Optimize per entity utilization tracking (Peter Zijlstra)
- ... misc other fixes, cleanups and smaller updates"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
sched: Don't scan all-offline ->cpus_allowed twice if !CONFIG_CPUSETS
sched: Move cpu_active() tests from stop_two_cpus() into migrate_swap_stop()
sched: Start stopper early
stop_machine: Kill cpu_stop_threads->setup() and cpu_stop_unpark()
stop_machine: Kill smp_hotplug_thread->pre_unpark, introduce stop_machine_unpark()
stop_machine: Change cpu_stop_queue_two_works() to rely on stopper->enabled
stop_machine: Introduce __cpu_stop_queue_work() and cpu_stop_queue_two_works()
stop_machine: Ensure that a queued callback will be called before cpu_stop_park()
sched/x86: Fix typo in __switch_to() comments
sched/core: Remove a parameter in the migrate_task_rq() function
sched/core: Drop unlikely behind BUG_ON()
sched/core: Fix task and run queue sched_info::run_delay inconsistencies
sched/numa: Fix task_tick_fair() from disabling numa_balancing
sched/core: Add preempt_count invariant check
sched/core: More notrace annotations
sched/core: Kill PREEMPT_ACTIVE
sched/core, sched/x86: Kill thread_info::saved_preempt_count
sched/core: Simplify preempt_count tests
sched/core: Robustify preemption leak checks
sched/core: Stop setting PREEMPT_ACTIVE
...
|
|
As of 654672d4ba1 (locking/atomics: Add _{acquire|release|relaxed}()
variants of some atomic operations) and 6d79ef2d30e (locking, asm-generic:
Add _{relaxed|acquire|release}() variants for 'atomic_long_t'), weakly
ordered archs can benefit from more relaxed use of barriers when locking
and unlocking, instead of regular full barrier semantics. While currently
only arm64 supports such optimizations, updating corresponding locking
primitives serves for other archs to immediately benefit as well, once the
necessary machinery is implemented of course.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul E.McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1443643395-17016-4-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
rt_mutex_waiter_less() check of task deadlines is open coded. Since this
is subject to wraparound bugs, make it use the correct helper.
Reported-by: Luca Abeni <luca.abeni@unitn.it>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441188096-23021-4-git-send-email-juri.lelli@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
No one uses this anymore, and this is not the first time the
idea of replacing it with a (now possible) userspace side.
Lock stealing logic was removed long ago in when the lock
was granted to the highest prio.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1435782588-4177-2-git-send-email-dave@stgolabs.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
"These locking updates depend on the alreay merged sched/core branch:
- Lockless top waiter wakeup for rtmutex (Davidlohr)
- Reduce hash bucket lock contention for PI futexes (Sebastian)
- Documentation update (Davidlohr)"
* 'sched-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Update stale plist comments
futex: Lower the lock contention on the HB lock during wake up
locking/rtmutex: Implement lockless top-waiter wakeup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather largish update for everything time and timer related:
- Cache footprint optimizations for both hrtimers and timer wheel
- Lower the NOHZ impact on systems which have NOHZ or timer migration
disabled at runtime.
- Optimize run time overhead of hrtimer interrupt by making the clock
offset updates smarter
- hrtimer cleanups and removal of restrictions to tackle some
problems in sched/perf
- Some more leap second tweaks
- Another round of changes addressing the 2038 problem
- First step to change the internals of clock event devices by
introducing the necessary infrastructure
- Allow constant folding for usecs/msecs_to_jiffies()
- The usual pile of clockevent/clocksource driver updates
The hrtimer changes contain updates to sched, perf and x86 as they
depend on them plus changes all over the tree to cleanup API changes
and redundant code, which got copied all over the place. The y2038
changes touch s390 to remove the last non 2038 safe code related to
boot/persistant clock"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
clocksource: Increase dependencies of timer-stm32 to limit build wreckage
timer: Minimize nohz off overhead
timer: Reduce timer migration overhead if disabled
timer: Stats: Simplify the flags handling
timer: Replace timer base by a cpu index
timer: Use hlist for the timer wheel hash buckets
timer: Remove FIFO "guarantee"
timers: Sanitize catchup_timer_jiffies() usage
hrtimer: Allow hrtimer::function() to free the timer
seqcount: Introduce raw_write_seqcount_barrier()
seqcount: Rename write_seqcount_barrier()
hrtimer: Fix hrtimer_is_queued() hole
hrtimer: Remove HRTIMER_STATE_MIGRATE
selftest: Timers: Avoid signal deadlock in leap-a-day
timekeeping: Copy the shadow-timekeeper over the real timekeeper last
clockevents: Check state instead of mode in suspend/resume path
selftests: timers: Add leap-second timer edge testing to leap-a-day.c
ntp: Do leapsecond adjustment in adjtimex read path
time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
ntp: Introduce and use SECS_PER_DAY macro instead of 86400
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes are:
- 'qspinlock' support, enabled on x86: queued spinlocks - these are
now the spinlock variant used by x86 as they outperform ticket
spinlocks in every category. (Waiman Long)
- 'pvqspinlock' support on x86: paravirtualized variant of queued
spinlocks. (Waiman Long, Peter Zijlstra)
- 'qrwlock' support, enabled on x86: queued rwlocks. Similar to
queued spinlocks, they are now the variant used by x86:
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
- various lockdep fixlets
- various locking primitives cleanups, further WRITE_ONCE()
propagation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
locking/lockdep: Remove hard coded array size dependency
locking/qrwlock: Don't contend with readers when setting _QW_WAITING
lockdep: Do not break user-visible string
locking/arch: Rename set_mb() to smp_store_mb()
locking/arch: Add WRITE_ONCE() to set_mb()
rtmutex: Warn if trylock is called from hard/softirq context
arch: Remove __ARCH_HAVE_CMPXCHG
locking/rtmutex: Drop usage of __HAVE_ARCH_CMPXCHG
locking/qrwlock: Rename QUEUE_RWLOCK to QUEUED_RWLOCKS
locking/pvqspinlock: Rename QUEUED_SPINLOCK to QUEUED_SPINLOCKS
locking/pvqspinlock: Replace xchg() by the more descriptive set_mb()
locking/pvqspinlock, x86: Enable PV qspinlock for Xen
locking/pvqspinlock, x86: Enable PV qspinlock for KVM
locking/pvqspinlock, x86: Implement the paravirt qspinlock call patching
locking/pvqspinlock: Implement simple paravirt support for the qspinlock
locking/qspinlock: Revert to test-and-set on hypervisors
locking/qspinlock: Use a simple write to grab the lock
locking/qspinlock: Optimize for smaller NR_CPUS
locking/qspinlock: Extract out code snippets for the next patch
locking/qspinlock: Add pending bit
...
|
|
... as of fb00aca4744 (rtmutex: Turn the plist into an rb-tree) we
no longer use plists for queuing any waiters. Update stale comments.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1432056298-18738-4-git-send-email-dave@stgolabs.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
wake_futex_pi() wakes the task before releasing the hash bucket lock
(HB). The first thing the woken up task usually does is to acquire the
lock which requires the HB lock. On SMP Systems this leads to blocking
on the HB lock which is released by the owner shortly after.
This patch rearranges the unlock path by first releasing the HB lock and
then waking up the task.
[ tglx: Fixed up the rtmutex unlock path ]
Originally-from: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Link: http://lkml.kernel.org/r/20150617083350.GA2433@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Mark the task for later wakeup after the wait_lock has been released.
This way, once the next task is awoken, it will have a better chance
to of finding the wait_lock free when continuing executing in
__rt_mutex_slowlock() when trying to acquire the rtmutex, calling
try_to_take_rt_mutex(). Upon contended scenarios, other tasks attempting
take the lock may acquire it first, right after the wait_lock is released,
but (a) this can also occur with the current code, as it relies on the
spinlock fairness, and (b) we are dealing with the top-waiter anyway,
so it will always take the lock next.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1432056298-18738-2-git-send-email-dave@stgolabs.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Make sure the upstream fixes are applied before adding further
modifications.
|
|
rt_mutex_trylock() must be called from thread context. It can be
called from atomic regions (preemption or interrupts disabled), but
not from hard/softirq/nmi context. Add a warning to alert abusers.
The reasons for this are:
1) There is a potential deadlock in the slowpath
2) Another cpu which blocks on the rtmutex will boost the task
which allegedly locked the rtmutex, but that cannot work
because the hard/softirq context borrows the task context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
|
|
The rtmutex code is the only user of __HAVE_ARCH_CMPXCHG and we have a few
other user of cmpxchg() which do not care about __HAVE_ARCH_CMPXCHG. This
define was first introduced in 23f78d4a0 ("[PATCH] pi-futex: rt mutex core")
which is v2.6.18. The generic cmpxchg was introduced later in 068fbad288
("Add cmpxchg_local to asm-generic for per cpu atomic operations") which is
v2.6.25.
Back then something was required to get rtmutex working with the fast
path on architectures without cmpxchg and this seems to be the result.
It popped up recently on rt-users because ARM (v6+) does not define
__HAVE_ARCH_CMPXCHG (even that it implements it) which results in slower
locking performance in the fast path.
To put some numbers on it: preempt -RT, am335x, 10 loops of
100000 invocations of rt_spin_lock() + rt_spin_unlock() (time "total" is
the average of the 10 loops for the 100000 invocations, "loop" is
"total / 100000 * 1000"):
cmpxchg | slowpath used || cmpxchg used
| total | loop || total | loop
--------|-----------|-------||------------|-------
ARMv6 | 9129.4 us | 91 ns || 3311.9 us | 33 ns
generic | 9360.2 us | 94 ns || 10834.6 us | 108 ns
----------------------------||--------------------
Forcing it to generic cmpxchg() made things worse for the slowpath and
even worse in cmpxchg() path. It boils down to 14ns more per lock+unlock
in a cache hot loop so it might not be that much in real world.
The last test was a substitute for pre ARMv6 machine but then I was able
to perform the comparison on imx28 which is ARMv5 and therefore is
always is using the generic cmpxchg implementation. And the numbers:
| total | loop
-------- |----------- |--------
slowpath | 263937.2 us | 2639 ns
cmpxchg | 16934.2 us | 169 ns
--------------------------------
The numbers are larger since the machine is slower in general. However,
letting rtmutex use cmpxchg() instead the slowpath seem to improve things.
Since from the ARM (tested on am335x + imx28) point of view always
using cmpxchg() in rt_mutex_lock() + rt_mutex_unlock() makes sense I
would drop the define.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: will.deacon@arm.com
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20150225175613.GE6823@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Ronny reported that the following scenario is not handled correctly:
T1 (prio = 10)
lock(rtmutex);
T2 (prio = 20)
lock(rtmutex)
boost T1
T1 (prio = 20)
sys_set_scheduler(prio = 30)
T1 prio = 30
....
sys_set_scheduler(prio = 10)
T1 prio = 30
The last step is wrong as T1 should now be back at prio 20.
Commit c365c292d059 ("sched: Consider pi boosting in setscheduler()")
only handles the case where a boosted tasks tries to lower its
priority.
Fix it by taking the new effective priority into account for the
decision whether a change of the priority is required.
Reported-by: Ronny Meeus <ronny.meeus@gmail.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Fixes: c365c292d059 ("sched: Consider pi boosting in setscheduler()")
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1505051806060.4225@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The check for hrtimer_active() after starting the timer is
pointless. If the timer is inactive it has expired already and
therefor the task pointer is already NULL.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203503.081830481@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking changes from Ingo Molnar:
"Main changes:
- jump label asm preparatory work for PowerPC (Anton Blanchard)
- rwsem optimizations and cleanups (Davidlohr Bueso)
- mutex optimizations and cleanups (Jason Low)
- futex fix (Oleg Nesterov)
- remove broken atomicity checks from {READ,WRITE}_ONCE() (Peter
Zijlstra)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc, jump_label: Include linux/jump_label.h to get HAVE_JUMP_LABEL define
jump_label: Allow jump labels to be used in assembly
jump_label: Allow asm/jump_label.h to be included in assembly
locking/mutex: Further simplify mutex_spin_on_owner()
locking: Remove atomicy checks from {READ,WRITE}_ONCE
locking/rtmutex: Rename argument in the rt_mutex_adjust_prio_chain() documentation as well
locking/rwsem: Fix lock optimistic spinning when owner is not running
locking: Remove ACCESS_ONCE() usage
locking/rwsem: Check for active lock before bailing on spinning
locking/rwsem: Avoid deceiving lock spinners
locking/rwsem: Set lock ownership ASAP
locking/rwsem: Document barrier need when waking tasks
locking/futex: Check PF_KTHREAD rather than !p->mm to filter out kthreads
locking/mutex: Refactor mutex_spin_on_owner()
locking/mutex: In mutex_spin_on_owner(), return true when owner changes
|
|
documentation as well
The following commit changed "deadlock_detect" to "chwalk":
8930ed80f970 ("rtmutex: Cleanup deadlock detector debug logic")
do that rename in the function's documentation as well.
Signed-off-by: Tom(JeHyeon) Yeon <tom.yeon@windriver.com>
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1426655010-31651-1-git-send-email-tom.yeon@windriver.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The "usual" path is:
- rt_mutex_slowlock()
- set_current_state()
- task_blocks_on_rt_mutex() (ret 0)
- __rt_mutex_slowlock()
- sleep or not but do return with __set_current_state(TASK_RUNNING)
- back to caller.
In the early error case where task_blocks_on_rt_mutex() return
-EDEADLK we never change the task's state back to RUNNING. I
assume this is intended. Without this change after ww_mutex
using rt_mutex the selftest passes but later I get plenty of:
| bad: scheduling from the idle thread!
backtraces.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: afffc6c1805d ("locking/rtmutex: Optimize setting task running after being blocked")
Link: http://lkml.kernel.org/r/1425056229-22326-4-git-send-email-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With task_blocks_on_rt_mutex() returning early -EDEADLK we never
add the waiter to the waitqueue. Later, we try to remove it via
remove_waiter() and go boom in rt_mutex_top_waiter() because
rb_entry() gives a NULL pointer.
( Tested on v3.18-RT where rtmutex is used for regular mutex and I
tried to get one twice in a row. )
Not sure when this started but I guess 397335f004f4 ("rtmutex: Fix
deadlock detector for real") or commit 3d5c9340d194 ("rtmutex:
Handle deadlock detection smarter").
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org> # for v3.16 and later kernels
Link: http://lkml.kernel.org/r/1424187823-19600-1-git-send-email-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We explicitly mark the task running after returning from
a __rt_mutex_slowlock() call, which does the actual sleeping
via wait-wake-trylocking. As such, this patch does two things:
(1) refactors the code so that setting current to TASK_RUNNING
is done by __rt_mutex_slowlock(), and not by the callers. The
downside to this is that it becomes a bit unclear when at what
point we block. As such I've added a comment that the task
blocks when calling __rt_mutex_slowlock() so readers can figure
out when it is running again.
(2) relaxes setting current's state through __set_current_state(),
instead of it's more expensive barrier alternative. There was no
need for the implied barrier as we're obviously not planning on
blocking.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422857784.18096.1.camel@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Specifically:
Documentation/locking/lockdep-design.txt
Documentation/locking/lockstat.txt
Documentation/locking/mutex-design.txt
Documentation/locking/rt-mutex-design.txt
Documentation/locking/rt-mutex.txt
Documentation/locking/spinlocks.txt
Documentation/locking/ww-mutex-design.txt
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: jason.low2@hp.com
Cc: aswin@hp.com
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Mason <clm@fb.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: fengguang.wu@intel.com
Link: http://lkml.kernel.org/r/1406752916-3341-6-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In case the dead lock detector is enabled we follow the lock chain to
the end in rt_mutex_adjust_prio_chain, even if we could stop earlier
due to the priority/waiter constellation.
But once we are no longer the top priority waiter in a certain step
or the task holding the lock has already the same priority then there
is no point in dequeing and enqueing along the lock chain as there is
no change at all.
So stop the queueing at this point.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/20140522031950.280830190@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The conditions under which deadlock detection is conducted are unclear
and undocumented.
Add constants instead of using 0/1 and provide a selection function
which hides the additional debug dependency from the calling code.
Add comments where needed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/20140522031949.947264874@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The deadlock logic is only required for futexes.
Remove the extra arguments for the public functions and also for the
futex specific ones which get always called with deadlock detection
enabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Exit right away, when the removed waiter was not the top priority
waiter on the lock. Get rid of the extra indent level.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
|
|
Add commentry to document the chain walk and the protection mechanisms
and their scope.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
|
