summaryrefslogtreecommitdiffstats
path: root/kernel/livepatch
AgeCommit message (Collapse)AuthorFilesLines
2019-07-11Merge branch 'for-linus' of ↵Linus Torvalds1-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Jiri Kosina: - stacktrace handling improvements from Miroslav benes - debug output improvements from Petr Mladek * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Remove duplicate warning about missing reliable stacktrace support Revert "livepatch: Remove reliable stacktrace check in klp_try_switch_task()" stacktrace: Remove weak version of save_stack_trace_tsk_reliable() livepatch: Use static buffer for debugging messages under rq lock livepatch: Remove stale kobj_added entries from kernel-doc descriptions
2019-06-20livepatch: Remove duplicate warning about missing reliable stacktrace supportPetr Mladek1-1/+0
WARN_ON_ONCE() could not be called safely under rq lock because of console deadlock issues. Moreover WARN_ON_ONCE() is superfluous in klp_check_stack(), because stack_trace_save_tsk_reliable() cannot return -ENOSYS thanks to klp_have_reliable_stack() check in klp_try_switch_task(). [ mbenes: changelog edited ] Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-06-20Revert "livepatch: Remove reliable stacktrace check in klp_try_switch_task()"Miroslav Benes1-0/+7
This reverts commit 1d98a69e5cef3aeb68bcefab0e67e342d6bb4dad. Commit 31adf2308f33 ("livepatch: Convert error about unsupported reliable stacktrace into a warning") weakened the enforcement for architectures to have reliable stack traces support. The system only warns now about it. It only makes sense to reintroduce the compile time checking in klp_try_switch_task() again and bail out early. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-06-15Merge tag 'trace-v5.2-rc4' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Out of range read of stack trace output - Fix for NULL pointer dereference in trace_uprobe_create() - Fix to a livepatching / ftrace permission race in the module code - Fix for NULL pointer dereference in free_ftrace_func_mapper() - A couple of build warning clean ups * tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper() module: Fix livepatch/ftrace module text permissions race tracing/uprobe: Fix obsolete comment on trace_uprobe_create() tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create() tracing: Make two symbols static tracing: avoid build warning with HAVE_NOP_MCOUNT tracing: Fix out-of-range read in trace_stack_print()
2019-06-14module: Fix livepatch/ftrace module text permissions raceJosh Poimboeuf1-0/+6
It's possible for livepatch and ftrace to be toggling a module's text permissions at the same time, resulting in the following panic: BUG: unable to handle page fault for address: ffffffffc005b1d9 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 3ea0c067 P4D 3ea0c067 PUD 3ea0e067 PMD 3cc13067 PTE 3b8a1061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 1 PID: 453 Comm: insmod Tainted: G O K 5.2.0-rc1-a188339ca5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 RIP: 0010:apply_relocate_add+0xbe/0x14c Code: fa 0b 74 21 48 83 fa 18 74 38 48 83 fa 0a 75 40 eb 08 48 83 38 00 74 33 eb 53 83 38 00 75 4e 89 08 89 c8 eb 0a 83 38 00 75 43 <89> 08 48 63 c1 48 39 c8 74 2e eb 48 83 38 00 75 32 48 29 c1 89 08 RSP: 0018:ffffb223c00dbb10 EFLAGS: 00010246 RAX: ffffffffc005b1d9 RBX: 0000000000000000 RCX: ffffffff8b200060 RDX: 000000000000000b RSI: 0000004b0000000b RDI: ffff96bdfcd33000 RBP: ffffb223c00dbb38 R08: ffffffffc005d040 R09: ffffffffc005c1f0 R10: ffff96bdfcd33c40 R11: ffff96bdfcd33b80 R12: 0000000000000018 R13: ffffffffc005c1f0 R14: ffffffffc005e708 R15: ffffffff8b2fbc74 FS: 00007f5f447beba8(0000) GS:ffff96bdff900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc005b1d9 CR3: 000000003cedc002 CR4: 0000000000360ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: klp_init_object_loaded+0x10f/0x219 ? preempt_latency_start+0x21/0x57 klp_enable_patch+0x662/0x809 ? virt_to_head_page+0x3a/0x3c ? kfree+0x8c/0x126 patch_init+0x2ed/0x1000 [livepatch_test02] ? 0xffffffffc0060000 do_one_initcall+0x9f/0x1c5 ? kmem_cache_alloc_trace+0xc4/0xd4 ? do_init_module+0x27/0x210 do_init_module+0x5f/0x210 load_module+0x1c41/0x2290 ? fsnotify_path+0x3b/0x42 ? strstarts+0x2b/0x2b ? kernel_read+0x58/0x65 __do_sys_finit_module+0x9f/0xc3 ? __do_sys_finit_module+0x9f/0xc3 __x64_sys_finit_module+0x1a/0x1c do_syscall_64+0x52/0x61 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The above panic occurs when loading two modules at the same time with ftrace enabled, where at least one of the modules is a livepatch module: CPU0 CPU1 klp_enable_patch() klp_init_object_loaded() module_disable_ro() ftrace_module_enable() ftrace_arch_code_modify_post_process() set_all_modules_text_ro() klp_write_object_relocations() apply_relocate_add() *patches read-only code* - BOOM A similar race exists when toggling ftrace while loading a livepatch module. Fix it by ensuring that the livepatch and ftrace code patching operations -- and their respective permissions changes -- are protected by the text_mutex. Link: http://lkml.kernel.org/r/ab43d56ab909469ac5d2520c5d944ad6d4abd476.1560474114.git.jpoimboe@redhat.com Reported-by: Johannes Erdfelt <johannes@erdfelt.com> Fixes: 444d13ff10fb ("modules: add ro_after_init support") Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-06-05livepatch: Use static buffer for debugging messages under rq lockPetr Mladek1-2/+1
The err_buf array uses 128 bytes of stack space. Move it off the stack by making it static. It's safe to use a shared buffer because klp_try_switch_task() is called under klp_mutex. Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner4-52/+4
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15Merge tag 'trace-v5.2' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The major changes in this tracing update includes: - Removal of non-DYNAMIC_FTRACE from 32bit x86 - Removal of mcount support from x86 - Emulating a call from int3 on x86_64, fixes live kernel patching - Consolidated Tracing Error logs file Minor updates: - Removal of klp_check_compiler_support() - kdb ftrace dumping output changes - Accessing and creating ftrace instances from inside the kernel - Clean up of #define if macro - Introduction of TRACE_EVENT_NOP() to disable trace events based on config options And other minor fixes and clean ups" * tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) x86: Hide the int3_emulate_call/jmp functions from UML livepatch: Remove klp_check_compiler_support() ftrace/x86: Remove mcount support ftrace/x86_32: Remove support for non DYNAMIC_FTRACE tracing: Simplify "if" macro code tracing: Fix documentation about disabling options using trace_options tracing: Replace kzalloc with kcalloc tracing: Fix partial reading of trace event's id file tracing: Allow RCU to run between postponed startup tests tracing: Fix white space issues in parse_pred() function tracing: Eliminate const char[] auto variables ring-buffer: Fix mispelling of Calculate tracing: probeevent: Fix to make the type of $comm string tracing: probeevent: Do not accumulate on ret variable tracing: uprobes: Re-enable $comm support for uprobe events ftrace/x86_64: Emulate call function while updating in breakpoint handler x86_64: Allow breakpoints to emulate call instructions x86_64: Add gap to int3 to allow for call emulation tracing: kdb: Allow ftdump to skip all but the last few entries tracing: Add trace_total_entries() / trace_total_entries_cpu() ...
2019-05-10livepatch: Remove klp_check_compiler_support()Jiri Kosina1-8/+0
The only purpose of klp_check_compiler_support() is to make sure that we are not using ftrace on x86 via mcount (because that's executed only after prologue has already happened, and that's too late for livepatching purposes). Now that mcount is not supported by ftrace any more, there is no need for klp_check_compiler_support() either. Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1905102346100.17054@cbobk.fhfr.pm Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-07Merge tag 'driver-core-5.2-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core/kobject updates from Greg KH: "Here is the "big" set of driver core patches for 5.2-rc1 There are a number of ACPI patches in here as well, as Rafael said they should go through this tree due to the driver core changes they required. They have all been acked by the ACPI developers. There are also a number of small subsystem-specific changes in here, due to some changes to the kobject core code. Those too have all been acked by the various subsystem maintainers. As for content, it's pretty boring outside of the ACPI changes: - spdx cleanups - kobject documentation updates - default attribute groups for kobjects - other minor kobject/driver core fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits) kobject: clean up the kobject add documentation a bit more kobject: Fix kernel-doc comment first line kobject: Remove docstring reference to kset firmware_loader: Fix a typo ("syfs" -> "sysfs") kobject: fix dereference before null check on kobj Revert "driver core: platform: Fix the usage of platform device name(pdev->name)" init/config: Do not select BUILD_BIN2C for IKCONFIG Provide in-kernel headers to make extending kernel easier kobject: Improve doc clarity kobject_init_and_add() kobject: Improve docs for kobject_add/del driver core: platform: Fix the usage of platform device name(pdev->name) livepatch: Replace klp_ktype_patch's default_attrs with groups cpufreq: schedutil: Replace default_attrs field with groups padata: Replace padata_attr_type default_attrs field with groups irqdesc: Replace irq_kobj_type's default_attrs field with groups net-sysfs: Replace ktype default_attrs field with groups block: Replace all ktype default_attrs with groups samples/kobject: Replace foo_ktype's default_attrs field with groups kobject: Add support for default attribute groups to kobj_type driver core: Postpone DMA tear-down until after devres release for probe failure ...
2019-05-07Merge branch 'for-linus' of ↵Linus Torvalds1-52/+39
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Jiri Kosina: - livepatching kselftests improvements from Joe Lawrence and Miroslav Benes - making use of gcc's -flive-patching option when available, from Miroslav Benes - kobject handling cleanups, from Petr Mladek * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Remove duplicated code for early initialization livepatch: Remove custom kobject state handling livepatch: Convert error about unsupported reliable stacktrace into a warning selftests/livepatch: Add functions.sh to TEST_PROGS_EXTENDED kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled selftests/livepatch: use TEST_PROGS for test scripts
2019-05-03livepatch: Remove duplicated code for early initializationPetr Mladek1-16/+26
kobject_init() call added one more operation that has to be done when doing the early initialization of both static and dynamic livepatch structures. It would have been easier when the early initialization code was not duplicated. Let's deduplicate it for future generations of livepatching hackers. The patch does not change the existing behavior. Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-05-03livepatch: Remove custom kobject state handlingPetr Mladek1-39/+17
kobject_init() always succeeds and sets the reference count to 1. It allows to always free the structures via kobject_put() and the related release callback. Note that the custom kobject state handling was used only because we did not know that kobject_put() can and actually should get called even when kobject_init_and_add() fails. The patch should not change the existing behavior. Suggested-by: "Tobin C. Harding" <tobin@kernel.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-04-29livepatch: Convert error about unsupported reliable stacktrace into a warningPetr Mladek1-3/+2
The commit d0807da78e11d46f ("livepatch: Remove immediate feature") caused that any livepatch was refused when reliable stacktraces were not supported on the given architecture. The limitation is too strong. User space processes are safely migrated even when entering or leaving the kernel. Kthreads transition would need to get forced. But it is safe when: + The livepatch does not change the semantic of the code. + Callbacks do not depend on a safely finished transition. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-04-29livepatch: Simplify stack trace retrievalThomas Gleixner1-13/+9
Replace the indirection through struct stack_trace by using the storage array based interfaces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.437950229@linutronix.de
2019-04-25livepatch: Replace klp_ktype_patch's default_attrs with groupsKimberly Brown1-1/+2
The kobj_type default_attrs field is being replaced by the default_groups field. Replace klp_ktype_patch's default_attrs field with default_groups and use the ATTRIBUTE_GROUPS macro to create klp_patch_groups. This patch was tested by loading the livepatch-sample module and verifying that the sysfs files for the attributes in the default groups were created. Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05Merge branch 'for-5.1/atomic-replace' into for-linusJiri Kosina3-26/+18
The atomic replace allows to create cumulative patches. They are useful when you maintain many livepatches and want to remove one that is lower on the stack. In addition it is very useful when more patches touch the same function and there are dependencies between them. It's also a feature some of the distros are using already to distribute their patches.
2019-02-06livepatch: Module coming and going callbacks can proceed with all listed patchesPetr Mladek1-20/+6
Livepatches can no longer get enabled and disabled repeatedly. The list klp_patches contains only enabled patches and eventually the patch in transition. The module coming and going callbacks do no longer need to check for these state. They have to proceed with all listed patches. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-02-06livepatch: Introduce klp_for_each_patch macroPetr Mladek3-5/+11
There are already macros to iterate over struct klp_func and klp_object. Add also klp_for_each_patch(). But make it internal because also klp_patches list is internal. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-02-06livepatch: core: Return EOPNOTSUPP instead of ENOSYSAlice Ferrazzi1-1/+1
As a result of an unsupported operation is better to use EOPNOTSUPP as error code. ENOSYS is only used for 'invalid syscall nr' and nothing else. Signed-off-by: Alice Ferrazzi <alice.ferrazzi@miraclelinux.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-01-16livepatch: Remove signal sysfs attributeMiroslav Benes3-74/+41
The fake signal is send automatically now. We can rely on it completely and remove the sysfs attribute. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-16livepatch: Send a fake signal periodicallyMiroslav Benes1-3/+13
An administrator may send a fake signal to all remaining blocking tasks of a running transition by writing to /sys/kernel/livepatch/<patch>/signal attribute. Let's do it automatically after 15 seconds. The timeout is chosen deliberately. It gives the tasks enough time to transition themselves. Theoretically, sending it once should be more than enough. However, every task must get outside of a patched function to be successfully transitioned. It could prove not to be simple and resending could be helpful in that case. A new workqueue job could be a cleaner solution to achieve it, but it could also introduce deadlocks and cause more headaches with synchronization and cancelling. [jkosina@suse.cz: removed added newline] Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-11livepatch: Remove ordering (stacking) of the livepatchesPetr Mladek1-4/+0
The atomic replace and cumulative patches were introduced as a more secure way to handle dependent patches. They simplify the logic: + Any new cumulative patch is supposed to take over shadow variables and changes made by callbacks from previous livepatches. + All replaced patches are discarded and the modules can be unloaded. As a result, there is only one scenario when a cumulative livepatch gets disabled. The different handling of "normal" and cumulative patches might cause confusion. It would make sense to keep only one mode. On the other hand, it would be rude to enforce using the cumulative livepatches even for trivial and independent (hot) fixes. However, the stack of patches is not really necessary any longer. The patch ordering was never clearly visible via the sysfs interface. Also the "normal" patches need a lot of caution anyway. Note that the list of enabled patches is still necessary but the ordering is not longer enforced. Otherwise, the code is ready to disable livepatches in an random order. Namely, klp_check_stack_func() always looks for the function from the livepatch that is being disabled. klp_func structures are just removed from the related func_stack. Finally, the ftrace handlers is removed only when the func_stack becomes empty. Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-11livepatch: Remove Nop structures when unusedPetr Mladek5-9/+76
Replaced patches are removed from the stack when the transition is finished. It means that Nop structures will never be needed again and can be removed. Why should we care? + Nop structures give the impression that the function is patched even though the ftrace handler has no effect. + Ftrace handlers do not come for free. They cause slowdown that might be visible in some workloads. The ftrace-related slowdown might actually be the reason why the function is no longer patched in the new cumulative patch. One would expect that cumulative patch would help solve these problems as well. + Cumulative patches are supposed to replace any earlier version of the patch. The amount of NOPs depends on which version was replaced. This multiplies the amount of scenarios that might happen. One might say that NOPs are innocent. But there are even optimized NOP instructions for different processors, for example, see arch/x86/kernel/alternative.c. And klp_ftrace_handler() is much more complicated. + It sounds natural to clean up a mess that is no longer needed. It could only be worse if we do not do it. This patch allows to unpatch and free the dynamic structures independently when the transition finishes. The free part is a bit tricky because kobject free callbacks are called asynchronously. We could not wait for them easily. Fortunately, we do not have to. Any further access can be avoided by removing them from the dynamic lists. Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-11livepatch: Add atomic replaceJason Baron4-8/+236
Sometimes we would like to revert a particular fix. Currently, this is not easy because we want to keep all other fixes active and we could revert only the last applied patch. One solution would be to apply new patch that implemented all the reverted functions like in the original code. It would work as expected but there will be unnecessary redirections. In addition, it would also require knowing which functions need to be reverted at build time. Another problem is when there are many patches that touch the same functions. There might be dependencies between patches that are not enforced on the kernel side. Also it might be pretty hard to actually prepare the patch and ensure compatibility with the other patches. Atomic replace && cumulative patches: A better solution would be to create cumulative patch and say that it replaces all older ones. This patch adds a new "replace" flag to struct klp_patch. When it is enabled, a set of 'nop' klp_func will be dynamically created for all functions that are already being patched but that will no longer be modified by the new patch. They are used as a new target during the patch transition. The idea is to handle Nops' structures like the static ones. When the dynamic structures are allocated, we initialize all values that are normally statically defined. The only exception is "new_func" in struct klp_func. It has to point to the original function and the address is known only when the object (module) is loaded. Note that we really need to set it. The address is used, for example, in klp_check_stack_func(). Nevertheless we still need to distinguish the dynamically allocated structures in some operations. For this, we add "nop" flag into struct klp_func and "dynamic" flag into struct klp_object. They need special handling in the following situations: + The structures are added into the lists of objects and functions immediately. In fact, the lists were created for this purpose. + The address of the original function is known only when the patched object (module) is loaded. Therefore it is copied later in klp_init_object_loaded(). + The ftrace handler must not set PC to func->new_func. It would cause infinite loop because the address points back to the beginning of the original function. + The various free() functions must free the structure itself. Note that other ways to detect the dynamic structures are not considered safe. For example, even the statically defined struct klp_object might include empty funcs array. It might be there just to run some callbacks. Also note that the safe iterator must be used in the free() functions. Otherwise already freed structures might get accessed. Special callbacks handling: The callbacks from the replaced patches are _not_ called by intention. It would be pretty hard to define a reasonable semantic and implement it. It might even be counter-productive. The new patch is cumulative. It is supposed to include most of the changes from older patches. In most cases, it will not want to call pre_unpatch() post_unpatch() callbacks from the replaced patches. It would disable/break things for no good reasons. Also it should be easier to handle various scenarios in a single script in the new patch than think about interactions caused by running many scripts from older patches. Not to say that the old scripts even would not expect to be called in this situation. Removing replaced patches: One nice effect of the cumulative patches is that the code from the older patches is no longer used. Therefore the replaced patches can be removed. It has several advantages: + Nops' structs will no longer be necessary and might be removed. This would save memory, restore performance (no ftrace handler), allow clear view on what is really patched. + Disabling the patch will cause using the original code everywhere. Therefore the livepatch callbacks could handle only one scenario. Note that the complication is already complex enough when the patch gets enabled. It is currently solved by calling callbacks only from the new cumulative patch. + The state is clean in both the sysfs interface and lsmod. The modules with the replaced livepatches might even get removed from the system. Some people actually expected this behavior from the beginning. After all a cumulative patch is supposed to "completely" replace an existing one. It is like when a new version of an application replaces an older one. This patch does the first step. It removes the replaced patches from the list of patches. It is safe. The consistency model ensures that they are no longer used. By other words, each process works only with the structures from klp_transition_patch. The removal is done by a special function. It combines actions done by __disable_patch() and klp_complete_transition(). But it is a fast track without all the transaction-related stuff. Signed-off-by: Jason Baron <jbaron@akamai.com> [pmladek@suse.com: Split, reuse existing code, simplified] Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-11livepatch: Use lists to manage patches, objects and functionsJason Baron1-2/+7
Currently klp_patch contains a pointer to a statically allocated array of struct klp_object and struct klp_objects contains a pointer to a statically allocated array of klp_func. In order to allow for the dynamic allocation of objects and functions, link klp_patch, klp_object, and klp_func together via linked lists. This allows us to more easily allocate new objects and functions, while having the iterator be a simple linked list walk. The static structures are added to the lists early. It allows to add the dynamically allocated objects before klp_init_object() and klp_init_func() calls. Therefore it reduces the further changes to the code. This patch does not change the existing behavior. Signed-off-by: Jason Baron <jbaron@akamai.com> [pmladek@suse.com: Initialize lists before init calls] Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-11livepatch: Simplify API by removing registration stepPetr Mladek3-193/+108
The possibility to re-enable a registered patch was useful for immediate patches where the livepatch module had to stay until the system reboot. The improved consistency model allows to achieve the same result by unloading and loading the livepatch module again. Also we are going to add a feature called atomic replace. It will allow to create a patch that would replace all already registered patches. The aim is to handle dependent patches more securely. It will obsolete the stack of patches that helped to handle the dependencies so far. Then it might be unclear when a cumulative patch re-enabling is safe. It would be complicated to support the many modes. Instead we could actually make the API and code easier to understand. Therefore, remove the two step public API. All the checks and init calls are moved from klp_register_patch() to klp_enabled_patch(). Also the patch is automatically freed, including the sysfs interface when the transition to the disabled state is completed. As a result, there is never a disabled patch on the top of the stack. Therefore we do not need to check the stack in __klp_enable_patch(). And we could simplify the check in __klp_disable_patch(). Also the API and logic is much easier. It is enough to call klp_enable_patch() in module_init() call. The patch can be disabled by writing '0' into /sys/kernel/livepatch/<patch>/enabled. Then the module can be removed once the transition finishes and sysfs interface is freed. The only problem is how to free the structures and kobjects safely. The operation is triggered from the sysfs interface. We could not put the related kobject from there because it would cause lock inversion between klp_mutex and kernfs locks, see kn->count lockdep map. Therefore, offload the free task to a workqueue. It is perfectly fine: + The patch can no longer be used in the livepatch operations. + The module could not be removed until the free operation finishes and module_put() is called. + The operation is asynchronous already when the first klp_try_complete_transition() fails and another call is queued with a delay. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-11livepatch: Don't block the removal of patches loaded after a forced transitionPetr Mladek3-6/+9
module_put() is currently never called in klp_complete_transition() when klp_force is set. As a result, we might keep the reference count even when klp_enable_patch() fails and klp_cancel_transition() is called. This might give the impression that a module might get blocked in some strange init state. Fortunately, it is not the case. The reference count is ignored when mod->init fails and erroneous modules are always removed. Anyway, this might be confusing. Instead, this patch moves the global klp_forced flag into struct klp_patch. As a result, we block only modules that might still be in use after a forced transition. Newly loaded livepatches might be eventually completely removed later. It is not a big deal. But the code is at least consistent with the reality. Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-11livepatch: Consolidate klp_free functionsPetr Mladek1-45/+92
The code for freeing livepatch structures is a bit scattered and tricky: + direct calls to klp_free_*_limited() and kobject_put() are used to release partially initialized objects + klp_free_patch() removes the patch from the public list and releases all objects except for patch->kobj + object_put(&patch->kobj) and the related wait_for_completion() are called directly outside klp_mutex; this code is duplicated; Now, we are going to remove the registration stage to simplify the API and the code. This would require handling more situations in klp_enable_patch() error paths. More importantly, we are going to add a feature called atomic replace. It will need to dynamically create func and object structures. We will want to reuse the existing init() and free() functions. This would create even more error path scenarios. This patch implements more straightforward free functions: + checks kobj_added flag instead of @limit[*] + initializes patch->list early so that the check for empty list always works + The action(s) that has to be done outside klp_mutex are done in separate klp_free_patch_finish() function. It waits only when patch->kobj was really released via the _start() part. The patch does not change the existing behavior. [*] We need our own flag to track that the kobject was successfully added to the hierarchy. Note that kobj.state_initialized only indicates that kobject has been initialized, not whether is has been added (and needs to be removed on cleanup). Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Jason Baron <jbaron@akamai.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-11livepatch: Shuffle klp_enable_patch()/klp_disable_patch() codePetr Mladek1-164/+166
We are going to simplify the API and code by removing the registration step. This would require calling init/free functions from enable/disable ones. This patch just moves the code to prevent more forward declarations. This patch does not change the code except for two forward declarations. Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-11livepatch: Change unsigned long old_addr -> void *old_func in struct klp_funcPetr Mladek4-15/+17
The address of the to be patched function and new function is stored in struct klp_func as: void *new_func; unsigned long old_addr; The different naming scheme and type are derived from the way the addresses are set. @old_addr is assigned at runtime using kallsyms-based search. @new_func is statically initialized, for example: static struct klp_func funcs[] = { { .old_name = "cmdline_proc_show", .new_func = livepatch_cmdline_proc_show, }, { } }; This patch changes unsigned long old_addr -> void *old_func. It removes some confusion when these address are later used in the code. It is motivated by a followup patch that adds special NOP struct klp_func where we want to assign func->new_func = func->old_addr respectively func->new_func = func->old_func. This patch does not modify the existing behavior. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Alice Ferrazzi <alice.ferrazzi@gmail.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-01livepatch: Replace synchronize_sched() with synchronize_rcu()Paul E. McKenney2-4/+4
Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). This commit therefore makes this change, even though it is but a comment. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-08-20Merge branch 'for-4.19/upstream' into for-linusJiri Kosina1-7/+0
2018-07-23livepatch: Validate module/old func name lengthKamalesh Babulal1-0/+6
livepatch module author can pass module name/old function name with more than the defined character limit. With obj->name length greater than MODULE_NAME_LEN, the livepatch module gets loaded but waits forever on the module specified by obj->name to be loaded. It also populates a /sys directory with an untruncated object name. In the case of funcs->old_name length greater then KSYM_NAME_LEN, it would not match against any of the symbol table entries. Instead loop through the symbol table comparing them against a nonexisting function, which can be avoided. The same issues apply, to misspelled/incorrect names. At least gatekeep the modules with over the limit string length, by checking for their length during livepatch module registration. Cc: stable@vger.kernel.org Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-07-16livepatch: Remove reliable stacktrace check in klp_try_switch_task()Kamalesh Babulal1-7/+0
Support for immediate flag was removed by commit d0807da78e11 ("livepatch: Remove immediate feature"). We bail out during patch registration for architectures, those don't support reliable stack trace. Remove the check in klp_try_switch_task(), as its not required. Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-17livepatch: Allow to call a custom callback when freeing shadow variablesPetr Mladek1-8/+18
We might need to do some actions before the shadow variable is freed. For example, we might need to remove it from a list or free some data that it points to. This is already possible now. The user can get the shadow variable by klp_shadow_get(), do the necessary actions, and then call klp_shadow_free(). This patch allows to do it a more elegant way. The user could implement the needed actions in a callback that is passed to klp_shadow_free() as a parameter. The callback usually does reverse operations to the constructor callback that can be called by klp_shadow_*alloc(). It is especially useful for klp_shadow_free_all(). There we need to do these extra actions for each found shadow variable with the given ID. Note that the memory used by the shadow variable itself is still released later by rcu callback. It is needed to protect internal structures that keep all shadow variables. But the destructor is called immediately. The shadow variable must not be access anyway after klp_shadow_free() is called. The user is responsible to protect this any suitable way. Be aware that the destructor is called under klp_shadow_lock. It is the same as for the contructor in klp_shadow_alloc(). Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-17livepatch: Initialize shadow variables safely by a custom callbackPetr Mladek1-29/+53
The existing API allows to pass a sample data to initialize the shadow data. It works well when the data are position independent. But it fails miserably when we need to set a pointer to the shadow structure itself. Unfortunately, we might need to initialize the pointer surprisingly often because of struct list_head. It is even worse because the list might be hidden in other common structures, for example, struct mutex, struct wait_queue_head. For example, this was needed to fix races in ALSA sequencer. It required to add mutex into struct snd_seq_client. See commit b3defb791b26ea06 ("ALSA: seq: Make ioctls race-free") and commit d15d662e89fc667b9 ("ALSA: seq: Fix racy pool initializations") This patch makes the API more safe. A custom constructor function and data are passed to klp_shadow_*alloc() functions instead of the sample data. Note that ctor_data are no longer a template for shadow->data. It might point to any data that might be necessary when the constructor is called. Also note that the constructor is called under klp_shadow_lock. It is an internal spin_lock that synchronizes alloc() vs. get() operations, see klp_shadow_get_or_alloc(). On one hand, this adds a risk of ABBA deadlocks. On the other hand, it allows to do some operations safely. For example, we could add the new structure into an existing list. This must be done only once when the structure is allocated. Reported-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-31Merge branch 'for-4.16/remove-immediate' into for-linusJiri Kosina2-55/+6
Pull 'immediate' feature removal from Miroslav Benes.
2018-01-11livepatch: add locking to force and signal functionsMiroslav Benes1-24/+28
klp_send_signals() and klp_force_transition() do not acquire klp_mutex, because it seemed to be superfluous. A potential race in klp_send_signals() was harmless and there was nothing in klp_force_transition() which needed to be synchronized. That changed with the addition of klp_forced variable during the review process. There is a small window now, when klp_complete_transition() does not see klp_forced set to true while all tasks have been already transitioned to the target state. module_put() is called and the module can be removed. Acquire klp_mutex in sysfs callback to prevent it. Do the same for the signal sending just to be sure. There is no real downside to that. Fixes: c99a2be790b07 ("livepatch: force transition to finish") Fixes: 43347d56c8d9d ("livepatch: send a fake signal to all blocking tasks") Reported-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-11livepatch: Remove immediate featureMiroslav Benes2-55/+6
Immediate flag has been used to disable per-task consistency and patch all tasks immediately. It could be useful if the patch doesn't change any function or data semantics. However, it causes problems on its own. The consistency problem is currently broken with respect to immediate patches. func a patches 1i 2i 3 When the patch 3 is applied, only 2i function is checked (by stack checking facility). There might be a task sleeping in 1i though. Such task is migrated to 3, because we do not check 1i in klp_check_stack_func() at all. Coming atomic replace feature would be easier to implement and more reliable without immediate. Thus, remove immediate feature completely and save us from the problems. Note that force feature has the similar problem. However it is considered as a last resort. If used, administrator should not apply any new live patches and should plan for reboot into an updated kernel. The architectures would now need to provide HAVE_RELIABLE_STACKTRACE to fully support livepatch. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-07livepatch: force transition to finishMiroslav Benes3-2/+65
If a task sleeps in a set of patched functions uninterruptedly, it could block the whole transition indefinitely. Thus it may be useful to clear its TIF_PATCH_PENDING to allow the process to finish. Admin can do that now by writing to force sysfs attribute in livepatch sysfs directory. TIF_PATCH_PENDING is then cleared for all tasks and the transition can finish successfully. Important note! Administrator should not use this feature without a clearance from a patch distributor. It must be checked that by doing so the consistency model guarantees are not violated. Removal (rmmod) of patch modules is permanently disabled when the feature is used. It cannot be guaranteed there is no task sleeping in such module. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-04livepatch: send a fake signal to all blocking tasksMiroslav Benes3-0/+72
Live patching consistency model is of LEAVE_PATCHED_SET and SWITCH_THREAD. This means that all tasks in the system have to be marked one by one as safe to call a new patched function. Safe means when a task is not (sleeping) in a set of patched functions. That is, no patched function is on the task's stack. Another clearly safe place is the boundary between kernel and userspace. The patching waits for all tasks to get outside of the patched set or to cross the boundary. The transition is completed afterwards. The problem is that a task can block the transition for quite a long time, if not forever. It could sleep in a set of patched functions, for example. Luckily we can force the task to leave the set by sending it a fake signal, that is a signal with no data in signal pending structures (no handler, no sign of proper signal delivered). Suspend/freezer use this to freeze the tasks as well. The task gets TIF_SIGPENDING set and is woken up (if it has been sleeping in the kernel before) or kicked by rescheduling IPI (if it was running on other CPU). This causes the task to go to kernel/userspace boundary where the signal would be handled and the task would be marked as safe in terms of live patching. There are tasks which are not affected by this technique though. The fake signal is not sent to kthreads. They should be handled differently. They can be woken up so they leave the patched set and their TIF_PATCH_PENDING can be cleared thanks to stack checking. For the sake of completeness, if the task is in TASK_RUNNING state but not currently running on some CPU it doesn't get the IPI, but it would eventually handle the signal anyway. Second, if the task runs in the kernel (in TASK_RUNNING state) it gets the IPI, but the signal is not handled on return from the interrupt. It would be handled on return to the userspace in the future when the fake signal is sent again. Stack checking deals with these cases in a better way. If the task was sleeping in a syscall it would be woken by our fake signal, it would check if TIF_SIGPENDING is set (by calling signal_pending() predicate) and return ERESTART* or EINTR. Syscalls with ERESTART* return values are restarted in case of the fake signal (see do_signal()). EINTR is propagated back to the userspace program. This could disturb the program, but... * each process dealing with signals should react accordingly to EINTR return values. * syscalls returning EINTR happen to be quite common situation in the system even if no fake signal is sent. * freezer sends the fake signal and does not deal with EINTR anyhow. Thus EINTR values are returned when the system is resumed. The very safe marking is done in architectures' "entry" on syscall and interrupt/exception exit paths, and in a stack checking functions of livepatch. TIF_PATCH_PENDING is cleared and the next recalc_sigpending() drops TIF_SIGPENDING. In connection with this, also call klp_update_patch_state() before do_signal(), so that recalc_sigpending() in dequeue_signal() can clear TIF_PATCH_PENDING immediately and thus prevent a double call of do_signal(). Note that the fake signal is not sent to stopped/traced tasks. Such task prevents the patching to finish till it continues again (is not traced anymore). Last, sending the fake signal is not automatic. It is done only when admin requests it by writing 1 to signal sysfs attribute in livepatch sysfs directory. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: x86@kernel.org Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds6-18/+399
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching updates from Jiri Kosina: - shadow variables support, allowing livepatches to associate new "shadow" fields to existing data structures, from Joe Lawrence - pre/post patch callbacks API, allowing livepatch writers to register callbacks to be called before and after patch application, from Joe Lawrence * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: __klp_disable_patch() should never be called for disabled patches livepatch: Correctly call klp_post_unpatch_callback() in error paths livepatch: add transition notices livepatch: move transition "complete" notice into klp_complete_transition() livepatch: add (un)patch callbacks livepatch: Small shadow variable documentation fixes livepatch: __klp_shadow_get_or_alloc() is local to shadow.c livepatch: introduce shadow variable API
2017-11-15Merge branch 'for-4.15/callbacks' into for-linusJiri Kosina4-17/+121
This pulls in an infrastructure/API that allows livepatch writers to register pre-patch and post-patch callbacks that allow for running a glue code necessary for finalizing the patching if necessary. Conflicts: kernel/livepatch/core.c - trivial conflict by adding a callback call into module going notifier vs. moving that code block to klp_cleanup_module_patches_limited() Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/shadow-variables' into for-linusJiri Kosina2-1/+278
Shadow variables allow callers to associate new shadow fields to existing data structures. This is intended to be used by livepatch modules seeking to emulate additions to data structure definitions.
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-26livepatch: __klp_disable_patch() should never be called for disabled patchesPetr Mladek1-1/+4
__klp_disable_patch() should never be called when the patch is not enabled. Let's add the same warning that we have in __klp_enable_patch(). This allows to remove the check when calling klp_pre_unpatch_callback(). It was strange anyway because it repeatedly checked per-patch flag for each patched object. Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-26livepatch: Correctly call klp_post_unpatch_callback() in error pathsPetr Mladek2-6/+6
The post_unpatch_enabled flag in struct klp_callbacks is set when a pre-patch callback successfully executes, indicating that we need to call a corresponding post-unpatch callback when the patch is reverted. This is true for ordinary patch disable as well as the error paths of klp_patch_object() callers. As currently coded, we inadvertently execute the post-patch callback twice in klp_module_coming() when klp_patch_object() fails: - We explicitly call klp_post_unpatch_callback() for the failed object - We call it again for the same object (and all the others) via klp_cleanup_module_patches_limited() We should clear the flag in klp_post_unpatch_callback() to make sure that the callback is not called twice. It makes the API more safe. (We could have removed the callback from the former error path as it would be covered by the latter call, but I think that is is cleaner to clear the post_unpatch_enabled after its invoked. For example, someone might later decide to call the callback only when obj->patched flag is set.) There is another mistake in the error path of klp_coming_module() in which it skips the post-unpatch callback for the klp_transition_patch. However, the pre-patch callback was called even for this patch, so be sure to make the corresponding callbacks for all patches. Finally, I used this opportunity to make klp_pre_patch_callback() more readable. [jkosina@suse.cz: incorporate changelog wording changes proposed by Joe Lawrence] Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-19livepatch: add transition noticesJoe Lawrence1-1/+17
Log a few kernel debug messages at the beginning of the following livepatch transition functions: klp_complete_transition() klp_cancel_transition() klp_init_transition() klp_reverse_transition() Also update the log notice message in klp_start_transition() for similar verbiage as the above messages. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>