summaryrefslogtreecommitdiffstats
path: root/kernel/livepatch
AgeCommit message (Collapse)AuthorFilesLines
2022-03-28Merge tag 'ptrace-cleanups-for-v5.18' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace cleanups from Eric Biederman: "This set of changes removes tracehook.h, moves modification of all of the ptrace fields inside of siglock to remove races, adds a missing permission check to ptrace.c The removal of tracehook.h is quite significant as it has been a major source of confusion in recent years. Much of that confusion was around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the semantics clearer). For people who don't know tracehook.h is a vestiage of an attempt to implement uprobes like functionality that was never fully merged, and was later superseeded by uprobes when uprobes was merged. For many years now we have been removing what tracehook functionaly a little bit at a time. To the point where anything left in tracehook.h was some weird strange thing that was difficult to understand" * tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: Remove duplicated include in ptrace.c ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE ptrace: Return the signal to continue with from ptrace_stop ptrace: Move setting/clearing ptrace_message into ptrace_stop tracehook: Remove tracehook.h resume_user_mode: Move to resume_user_mode.h resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume signal: Move set_notify_signal and clear_notify_signal into sched/signal.h task_work: Decouple TIF_NOTIFY_SIGNAL and task_work task_work: Call tracehook_notify_signal from get_signal on all architectures task_work: Introduce task_work_pending task_work: Remove unnecessary include from posix_timers.h ptrace: Remove tracehook_signal_handler ptrace: Remove arch_syscall_{enter,exit}_tracehook ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h ptrace/arm: Rename tracehook_report_syscall report_syscall ptrace: Move ptrace_report_syscall into ptrace.h
2022-03-28Merge tag 'livepatching-for-5.18' of ↵Linus Torvalds1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: - Forced transitions block only to-be-removed livepatches [Chengming] - Detect when ftrace handler could not be disabled in self-tests [David] - Calm down warning from a static analyzer [Tom] * tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Reorder to use before freeing a pointer livepatch: Don't block removal of patches that are safe to unload livepatch: Skip livepatch tests if ftrace cannot be configured
2022-03-27Merge tag 'x86_core_for_5.18_rc1' of ↵Linus Torvalds1-17/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra: "Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself" [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html * tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) kvm/emulate: Fix SETcc emulation for ENDBR x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0 x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0 kbuild: Fixup the IBT kbuild changes x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy x86: Remove toolchain check for X32 ABI capability x86/alternative: Use .ibt_endbr_seal to seal indirect calls objtool: Find unused ENDBR instructions objtool: Validate IBT assumptions objtool: Add IBT/ENDBR decoding objtool: Read the NOENDBR annotation x86: Annotate idtentry_df() x86,objtool: Move the ASM_REACHABLE annotation to objtool.h x86: Annotate call_on_stack() objtool: Rework ASM_REACHABLE x86: Mark __invalid_creds() __noreturn exit: Mark do_group_exit() __noreturn x86: Mark stop_this_cpu() __noreturn objtool: Ignore extra-symbol code objtool: Rename --duplicate to --lto ...
2022-03-17livepatch: Don't block removal of patches that are safe to unloadChengming Zhou1-2/+9
module_put() is not called for a patch with "forced" flag. It should block the removal of the livepatch module when the code might still be in use after forced transition. klp_force_transition() currently sets "forced" flag for all patches on the list. In fact, any patch can be safely unloaded when it passed through the consistency model in KLP_UNPATCHED transition. In other words, the "forced" flag must be set only for livepatches that are being removed. In particular, set the "forced" flag: + only for klp_transition_patch when the transition to KLP_UNPATCHED state was forced. + all replaced patches when the transition to KLP_PATCHED state was forced and the patch was replacing the existing patches. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> [mbenes@suse.cz: wording improvements] Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220312152220.88127-1-zhouchengming@bytedance.com
2022-03-15x86/livepatch: Validate __fentry__ locationPeter Zijlstra1-17/+2
Currently livepatch assumes __fentry__ lives at func+0, which is most likely untrue with IBT on. Instead make it use ftrace_location() by default which both validates and finds the actual ip if there is any in the same symbol. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154318.285971256@infradead.org
2022-03-10tracehook: Remove tracehook.hEric W. Biederman1-1/+0
Now that all of the definitions have moved out of tracehook.h into ptrace.h, sched/signal.h, resume_user_mode.h there is nothing left in tracehook.h so remove it. Update the few files that were depending upon tracehook.h to bring in definitions to use the headers they need directly. Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20220309162454.123006-13-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-02-07livepatch: Fix build failure on 32 bits processorsChristophe Leroy1-2/+2
Trying to build livepatch on powerpc/32 results in: kernel/livepatch/core.c: In function 'klp_resolve_symbols': kernel/livepatch/core.c:221:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 221 | sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info); | ^ kernel/livepatch/core.c:221:21: error: assignment to 'Elf32_Sym *' {aka 'struct elf32_sym *'} from incompatible pointer type 'Elf64_Sym *' {aka 'struct elf64_sym *'} [-Werror=incompatible-pointer-types] 221 | sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info); | ^ kernel/livepatch/core.c: In function 'klp_apply_section_relocs': kernel/livepatch/core.c:312:35: error: passing argument 1 of 'klp_resolve_symbols' from incompatible pointer type [-Werror=incompatible-pointer-types] 312 | ret = klp_resolve_symbols(sechdrs, strtab, symndx, sec, sec_objname); | ^~~~~~~ | | | Elf32_Shdr * {aka struct elf32_shdr *} kernel/livepatch/core.c:193:44: note: expected 'Elf64_Shdr *' {aka 'struct elf64_shdr *'} but argument is of type 'Elf32_Shdr *' {aka 'struct elf32_shdr *'} 193 | static int klp_resolve_symbols(Elf64_Shdr *sechdrs, const char *strtab, | ~~~~~~~~~~~~^~~~~~~ Fix it by using the right types instead of forcing 64 bits types. Fixes: 7c8e2bdd5f0d ("livepatch: Apply vmlinux-specific KLP relocations early") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Petr Mladek <pmladek@suse.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5288e11b018a762ea3351cc8fb2d4f15093a4457.1640017960.git.christophe.leroy@csgroup.eu
2022-01-16Merge tag 'livepatching-for-5.17' of ↵Linus Torvalds2-19/+16
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: - Correctly handle kobjects when a livepatch init fails - Avoid CPU hogging when searching for many livepatched symbols - Add livepatch API page into documentation * tag 'livepatching-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Avoid CPU hogging with cond_resched livepatch: Fix missing unlock on error in klp_enable_patch() livepatch: Fix kobject refcount bug on klp_init_patch_early failure path Documentation: livepatch: Add livepatch API page
2022-01-04livepatch: Fix missing unlock on error in klp_enable_patch()Yang Yingliang1-1/+3
Add missing unlock when try_module_get() fails in klp_enable_patch(). Fixes: 5ef3dd20555e8e8 ("livepatch: Fix kobject refcount bug on klp_init_patch_early failure path") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: David Vernet <void@manifault.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20211225025115.475348-1-yangyingliang@huawei.com
2022-01-04livepatch: Fix kobject refcount bug on klp_init_patch_early failure pathDavid Vernet1-18/+13
When enabling a klp patch with klp_enable_patch(), klp_init_patch_early() is invoked to initialize the kobjects for the patch itself, as well as the 'struct klp_object' and 'struct klp_func' objects that comprise it. However, there are some error paths in klp_enable_patch() where some kobjects may have been initialized with kobject_init(), but an error code is still returned due to e.g. a 'struct klp_object' having a NULL funcs pointer. In these paths, the initial reference of the kobject of the 'struct klp_patch' may never be released, along with one or more of its objects and their functions, as kobject_put() is not invoked on the cleanup path if klp_init_patch_early() returns an error code. For example, if an object entry such as the following were added to the sample livepatch module's klp patch, it would cause the vmlinux klp_object, and its klp_func which updates 'cmdline_proc_show', to never be released: static struct klp_object objs[] = { { /* name being NULL means vmlinux */ .funcs = funcs, }, { /* NULL funcs -- would cause reference leak */ .name = "kvm", }, { } }; Without this change, if CONFIG_DEBUG_KOBJECT is enabled, and the sample klp patch is loaded, the kobjects (the patch, the vmlinux 'struct klp_object', and its func) are observed as initialized, but never released, in the dmesg log output. With the change, these kobject references no longer fail to be released as the error case is properly handled before they are initialized. Signed-off-by: David Vernet <void@manifault.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2021-12-23Documentation: livepatch: Add livepatch API pageDavid Vernet1-3/+3
The livepatch subsystem has several exported functions and objects with kerneldoc comments. Though the livepatch documentation contains handwritten descriptions of all of these exported functions, they are currently not pulled into the docs build using the kernel-doc directive. In order to allow readers of the documentation to see the full kerneldoc comments in the generated documentation files, this change adds a new Documentation/livepatch/api.rst page which contains kernel-doc directives to link the kerneldoc comments directly in the documentation. With this, all of the hand-written descriptions of the APIs now cross-reference the kerneldoc comments on the new Livepatching APIs page, and running ./scripts/find-unused-docs.sh on kernel/livepatch no longer shows any files as missing documentation. Note that all of the handwritten API descriptions were left alone with the exception of Documentation/livepatch/system-state.rst, which was updated to allow the cross-referencing to work correctly. The file now follows the cross-referencing formatting guidance specified in Documentation/doc-guide/kernel-doc.rst. Furthermore, some comments around klp_shadow_free_all() were updated to say <_, id> rather than <*, id> to match the rest of the file, and to prevent the docs build from emitting an "Inline emphasis start-string without end string" error. Signed-off-by: David Vernet <void@manifault.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20211221145743.4098360-1-void@manifault.com
2021-11-01Merge tag 'trace-v5.16' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - kprobes: Restructured stack unwinder to show properly on x86 when a stack dump happens from a kretprobe callback. - Fix to bootconfig parsing - Have tracefs allow owner and group permissions by default (only denying others). There's been pressure to allow non root to tracefs in a controlled fashion, and using groups is probably the safest. - Bootconfig memory managament updates. - Bootconfig clean up to have the tools directory be less dependent on changes in the kernel tree. - Allow perf to be traced by function tracer. - Rewrite of function graph tracer to be a callback from the function tracer instead of having its own trampoline (this change will happen on an arch by arch basis, and currently only x86_64 implements it). - Allow multiple direct trampolines (bpf hooks to functions) be batched together in one synchronization. - Allow histogram triggers to add variables that can perform calculations against the event's fields. - Use the linker to determine architecture callbacks from the ftrace trampoline to allow for proper parameter prototypes and prevent warnings from the compiler. - Extend histogram triggers to key off of variables. - Have trace recursion use bit magic to determine preempt context over if branches. - Have trace recursion disable preemption as all use cases do anyway. - Added testing for verification of tracing utilities. - Various small clean ups and fixes. * tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits) tracing/histogram: Fix semicolon.cocci warnings tracing/histogram: Fix documentation inline emphasis warning tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together tracing: Show size of requested perf buffer bootconfig: Initialize ret in xbc_parse_tree() ftrace: do CPU checking after preemption disabled ftrace: disable preemption when recursion locked tracing/histogram: Document expression arithmetic and constants tracing/histogram: Optimize division by a power of 2 tracing/histogram: Covert expr to const if both operands are constants tracing/histogram: Simplify handling of .sym-offset in expressions tracing: Fix operator precedence for hist triggers expression tracing: Add division and multiplication support for hist triggers tracing: Add support for creating hist trigger variables from literal selftests/ftrace: Stop tracing while reading the trace file by default MAINTAINERS: Update KPROBES and TRACING entries test_kprobes: Move it from kernel/ to lib/ docs, kprobes: Remove invalid URL and add new reference samples/kretprobes: Fix return value if register_kretprobe() failed lib/bootconfig: Fix the xbc_get_info kerneldoc ...
2021-10-27ftrace: disable preemption when recursion locked王贇1-6/+6
As the documentation explained, ftrace_test_recursion_trylock() and ftrace_test_recursion_unlock() were supposed to disable and enable preemption properly, however currently this work is done outside of the function, which could be missing by mistake. And since the internal using of trace_test_and_set_recursion() and trace_clear_recursion() also require preemption disabled, we can just merge the logical. This patch will make sure the preemption has been disabled when trace_test_and_set_recursion() return bit >= 0, and trace_clear_recursion() will enable the preemption if previously enabled. Link: https://lkml.kernel.org/r/13bde807-779c-aa4c-0672-20515ae365ea@linux.alibaba.com CC: Petr Mladek <pmladek@suse.com> Cc: Guo Ren <guoren@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Jisheng Zhang <jszhang@kernel.org> CC: Steven Rostedt <rostedt@goodmis.org> CC: Miroslav Benes <mbenes@suse.cz> Reported-by: Abaci <abaci@linux.alibaba.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> [ Removed extra line in comment - SDR ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-14sched,livepatch: Use wake_up_if_idle()Peter Zijlstra1-1/+4
Make sure to prod idle CPUs so they call klp_update_patch_state(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Petr Mladek <pmladek@suse.com> Tested-by: Vasily Gorbik <gor@linux.ibm.com> # on s390 Link: https://lkml.kernel.org/r/20210929151723.162004989@infradead.org
2021-10-07sched,livepatch: Use task_call_func()Peter Zijlstra1-46/+44
Instead of frobbing around with scheduler internals, use the shiny new task_call_func() interface. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Petr Mladek <pmladek@suse.com> Tested-by: Vasily Gorbik <gor@linux.ibm.com> # on s390 Link: https://lkml.kernel.org/r/20210929152428.709906138@infradead.org
2021-08-19livepatch: Replace deprecated CPU-hotplug functions.Sebastian Andrzej Siewior1-2/+2
The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: live-patching@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-04-27Merge tag 'livepatching-for-5.13' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching update from Petr Mladek: - Use TIF_NOTIFY_SIGNAL infrastructure instead of the fake signal * tag 'livepatching-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Replace the fake signal sending with TIF_NOTIFY_SIGNAL infrastructure
2021-03-30livepatch: Replace the fake signal sending with TIF_NOTIFY_SIGNAL infrastructureMiroslav Benes1-3/+2
Livepatch sends a fake signal to all remaining blocking tasks of a running transition after a set period of time. It uses TIF_SIGPENDING flag for the purpose. Commit 12db8b690010 ("entry: Add support for TIF_NOTIFY_SIGNAL") added a generic infrastructure to achieve the same. Replace our bespoke solution with the generic one. Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-02-08kallsyms: refactor {,module_}kallsyms_on_each_symbolChristoph Hellwig1-2/+0
Require an explicit call to module_kallsyms_on_each_symbol to look for symbols in modules instead of the call from kallsyms_on_each_symbol, and acquire module_mutex inside of module_kallsyms_on_each_symbol instead of leaving that up to the caller. Note that this slightly changes the behavior for the livepatch code in that the symbols from vmlinux are not iterated anymore if objname is set, but that actually is the desired behavior in this case. Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-02-08module: use RCU to synchronize find_moduleChristoph Hellwig1-2/+3
Allow for a RCU-sched critical section around find_module, following the lower level find_module_all helper, and switch the two callers outside of module.c to use such a RCU-sched critical section instead of module_mutex. Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-11-13livepatch: Use the default ftrace_ops instead of REGS when ARGS is availableSteven Rostedt (VMware)2-5/+6
When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS is available, the ftrace call will be able to set the ip of the calling function. This will improve the performance of live kernel patching where it does not need all the regs to be stored just to change the instruction pointer. If all archs that support live kernel patching also support HAVE_DYNAMIC_FTRACE_WITH_ARGS, then the architecture specific function klp_arch_set_pc() could be made generic. It is possible that an arch can support HAVE_DYNAMIC_FTRACE_WITH_ARGS but not HAVE_DYNAMIC_FTRACE_WITH_REGS and then have access to live patching. Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: live-patching@vger.kernel.org Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-13ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regsSteven Rostedt (VMware)1-1/+2
In preparation to have arguments of a function passed to callbacks attached to functions as default, change the default callback prototype to receive a struct ftrace_regs as the forth parameter instead of a pt_regs. For callbacks that set the FL_SAVE_REGS flag in their ftrace_ops flags, they will now need to get the pt_regs via a ftrace_get_regs() helper call. If this is called by a callback that their ftrace_ops did not have a FL_SAVE_REGS flag set, it that helper function will return NULL. This will allow the ftrace_regs to hold enough just to get the parameters and stack pointer, but without the worry that callbacks may have a pt_regs that is not completely filled. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06ftrace: Add recording of functions that caused recursionSteven Rostedt (VMware)1-1/+1
This adds CONFIG_FTRACE_RECORD_RECURSION that will record to a file "recursed_functions" all the functions that caused recursion while a callback to the function tracer was running. Link: https://lkml.kernel.org/r/20201106023548.102375687@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Guo Ren <guoren@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-csky@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: live-patching@vger.kernel.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06livepatch: Trigger WARNING if livepatch function fails due to recursionSteven Rostedt (VMware)1-1/+1
If for some reason a function is called that triggers the recursion detection of live patching, trigger a warning. By not executing the live patch code, it is possible that the old unpatched function will be called placing the system into an unknown state. Link: https://lore.kernel.org/r/20201029145709.GD16774@alley Link: https://lkml.kernel.org/r/20201106023547.312639435@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: live-patching@vger.kernel.org Suggested-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06livepatch/ftrace: Add recursion protection to the ftrace callbackSteven Rostedt (VMware)1-0/+5
If a ftrace callback does not supply its own recursion protection and does not set the RECURSION_SAFE flag in its ftrace_ops, then ftrace will make a helper trampoline to do so before calling the callback instead of just calling the callback directly. The default for ftrace_ops is going to change. It will expect that handlers provide their own recursion protection, unless its ftrace_ops states otherwise. Link: https://lkml.kernel.org/r/20201028115613.291169246@goodmis.org Link: https://lkml.kernel.org/r/20201106023547.122802424@goodmis.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: live-patching@vger.kernel.org Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-16kernel/: fix repeated words in commentsRandy Dunlap1-1/+1
Fix multiple occurrences of duplicated words in kernel/. Fix one typo/spello on the same line as a duplicate word. Change one instance of "the the" to "that the". Otherwise just drop one of the repeated words. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/98202fa6-8919-ef63-9efe-c0fad5ca7af1@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-11livepatch: Make klp_apply_object_relocs staticSamuel Zou1-1/+2
Fix the following sparse warning: kernel/livepatch/core.c:748:5: warning: symbol 'klp_apply_object_relocs' was not declared. The klp_apply_object_relocs() has only one call site within core.c; it should be static Fixes: 7c8e2bdd5f0d ("livepatch: Apply vmlinux-specific KLP relocations early") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Samuel Zou <zou_wei@huawei.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-08x86/module: Use text_mutex in apply_relocate_add()Josh Poimboeuf1-6/+0
Now that the livepatch code no longer needs the text_mutex for changing module permissions, move its usage down to apply_relocate_add(). Note the s390 version of apply_relocate_add() doesn't need to use the text_mutex because it already uses s390_kernel_write_lock, which accomplishes the same task. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-08livepatch: Remove module_disable_ro() usageJosh Poimboeuf1-2/+0
With arch_klp_init_object_loaded() gone, and apply_relocate_add() now using text_poke(), livepatch no longer needs to use module_disable_ro(). Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-08livepatch: Prevent module-specific KLP rela sections from referencing ↵Josh Poimboeuf1-11/+27
vmlinux symbols Prevent module-specific KLP rela sections from referencing vmlinux symbols. This helps prevent ordering issues with module special section initializations. Presumably such symbols are exported and normal relas can be used instead. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-08livepatch: Remove .klp.archPeter Zijlstra1-18/+9
After the previous patch, vmlinux-specific KLP relocations are now applied early during KLP module load. This means that .klp.arch sections are no longer needed for *vmlinux-specific* KLP relocations. One might think they're still needed for *module-specific* KLP relocations. If a to-be-patched module is loaded *after* its corresponding KLP module is loaded, any corresponding KLP relocations will be delayed until the to-be-patched module is loaded. If any special sections (.parainstructions, for example) rely on those relocations, their initializations (apply_paravirt) need to be done afterwards. Thus the apparent need for arch_klp_init_object_loaded() and its corresponding .klp.arch sections -- it allows some of the special section initializations to be done at a later time. But... if you look closer, that dependency between the special sections and the module-specific KLP relocations doesn't actually exist in reality. Looking at the contents of the .altinstructions and .parainstructions sections, there's not a realistic scenario in which a KLP module's .altinstructions or .parainstructions section needs to access a symbol in a to-be-patched module. It might need to access a local symbol or even a vmlinux symbol; but not another module's symbol. When a special section needs to reference a local or vmlinux symbol, a normal rela can be used instead of a KLP rela. Since the special section initializations don't actually have any real dependency on module-specific KLP relocations, .klp.arch and arch_klp_init_object_loaded() no longer have a reason to exist. So remove them. As Peter said much more succinctly: So the reason for .klp.arch was that .klp.rela.* stuff would overwrite paravirt instructions. If that happens you're doing it wrong. Those RELAs are core kernel, not module, and thus should've happened in .rela.* sections at patch-module loading time. Reverting this removes the two apply_{paravirt,alternatives}() calls from the late patching path, and means we don't have to worry about them when removing module_disable_ro(). [ jpoimboe: Rewrote patch description. Tweaked klp_init_object_loaded() error path. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-08livepatch: Apply vmlinux-specific KLP relocations earlyJosh Poimboeuf1-51/+86
KLP relocations are livepatch-specific relocations which are applied to a KLP module's text or data. They exist for two reasons: 1) Unexported symbols: replacement functions often need to access unexported symbols (e.g. static functions), which "normal" relocations don't allow. 2) Late module patching: this is the ability for a KLP module to bypass normal module dependencies, such that the KLP module can be loaded *before* a to-be-patched module. This means that relocations which need to access symbols in the to-be-patched module might need to be applied to the KLP module well after it has been loaded. Non-late-patched KLP relocations are applied from the KLP module's init function. That usually works fine, unless the patched code wants to use alternatives, paravirt patching, jump tables, or some other special section which needs relocations. Then we run into ordering issues and crashes. In order for those special sections to work properly, the KLP relocations should be applied *before* the special section init code runs, such as apply_paravirt(), apply_alternatives(), or jump_label_apply_nops(). You might think the obvious solution would be to move the KLP relocation initialization earlier, but it's not necessarily that simple. The problem is the above-mentioned late module patching, for which KLP relocations can get applied well after the KLP module is loaded. To "fix" this issue in the past, we created .klp.arch sections: .klp.arch.{module}..altinstructions .klp.arch.{module}..parainstructions Those sections allow KLP late module patching code to call apply_paravirt() and apply_alternatives() after the module-specific KLP relocations (.klp.rela.{module}.{section}) have been applied. But that has a lot of drawbacks, including code complexity, the need for arch-specific code, and the (per-arch) danger that we missed some special section -- for example the __jump_table section which is used for jump labels. It turns out there's a simpler and more functional approach. There are two kinds of KLP relocation sections: 1) vmlinux-specific KLP relocation sections .klp.rela.vmlinux.{sec} These are relocations (applied to the KLP module) which reference unexported vmlinux symbols. 2) module-specific KLP relocation sections .klp.rela.{module}.{sec}: These are relocations (applied to the KLP module) which reference unexported or exported module symbols. Up until now, these have been treated the same. However, they're inherently different. Because of late module patching, module-specific KLP relocations can be applied very late, thus they can create the ordering headaches described above. But vmlinux-specific KLP relocations don't have that problem. There's nothing to prevent them from being applied earlier. So apply them at the same time as normal relocations, when the KLP module is being loaded. This means that for vmlinux-specific KLP relocations, we no longer have any ordering issues. vmlinux-referencing jump labels, alternatives, and paravirt patching will work automatically, without the need for the .klp.arch hacks. All that said, for module-specific KLP relocations, the ordering problems still exist and we *do* still need .klp.arch. Or do we? Stay tuned. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-08livepatch: Disallow vmlinux.koJosh Poimboeuf1-0/+5
This is purely a theoretical issue, but if there were a module named vmlinux.ko, the livepatch relocation code wouldn't be able to distinguish between vmlinux-specific and vmlinux.o-specific KLP relocations. If CONFIG_LIVEPATCH is enabled, don't allow a module named vmlinux.ko. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-11-27Merge tag 'trace-v5.5' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "New tracing features: - New PERMANENT flag to ftrace_ops when attaching a callback to a function. As /proc/sys/kernel/ftrace_enabled when set to zero will disable all attached callbacks in ftrace, this has a detrimental impact on live kernel tracing, as it disables all that it patched. If a ftrace_ops is registered to ftrace with the PERMANENT flag set, it will prevent ftrace_enabled from being disabled, and if ftrace_enabled is already disabled, it will prevent a ftrace_ops with PREMANENT flag set from being registered. - New register_ftrace_direct(). As eBPF would like to register its own trampolines to be called by the ftrace nop locations directly, without going through the ftrace trampoline, this function has been added. This allows for eBPF trampolines to live along side of ftrace, perf, kprobe and live patching. It also utilizes the ftrace enabled_functions file that keeps track of functions that have been modified in the kernel, to allow for security auditing. - Allow for kernel internal use of ftrace instances. Subsystems in the kernel can now create and destroy their own tracing instances which allows them to have their own tracing buffer, and be able to record events without worrying about other users from writing over their data. - New seq_buf_hex_dump() that lets users use the hex_dump() in their seq_buf usage. - Notifications now added to tracing_max_latency to allow user space to know when a new max latency is hit by one of the latency tracers. - Wider spread use of generic compare operations for use of bsearch and friends. - More synthetic event fields may be defined (32 up from 16) - Use of xarray for architectures with sparse system calls, for the system call trace events. This along with small clean ups and fixes" * tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (51 commits) tracing: Enable syscall optimization for MIPS tracing: Use xarray for syscall trace events tracing: Sample module to demonstrate kernel access to Ftrace instances. tracing: Adding new functions for kernel access to Ftrace instances tracing: Fix Kconfig indentation ring-buffer: Fix typos in function ring_buffer_producer ftrace: Use BIT() macro ftrace: Return ENOTSUPP when DYNAMIC_FTRACE_WITH_DIRECT_CALLS is not configured ftrace: Rename ftrace_graph_stub to ftrace_stub_graph ftrace: Add a helper function to modify_ftrace_direct() to allow arch optimization ftrace: Add helper find_direct_entry() to consolidate code ftrace: Add another check for match in register_ftrace_direct() ftrace: Fix accounting bug with direct->count in register_ftrace_direct() ftrace/selftests: Fix spelling mistake "wakeing" -> "waking" tracing: Increase SYNTH_FIELDS_MAX for synthetic_events ftrace/samples: Add a sample module that implements modify_ftrace_direct() ftrace: Add modify_ftrace_direct() tracing: Add missing "inline" in stub function of latency_fsnotify() tracing: Remove stray tab in TRACE_EVAL_MAP_FILE's help text tracing: Use seq_buf_hex_dump() to dump buffers ...
2019-11-04ftrace: Introduce PERMANENT ftrace_ops flagMiroslav Benes1-1/+2
Livepatch uses ftrace for redirection to new patched functions. It means that if ftrace is disabled, all live patched functions are disabled as well. Toggling global 'ftrace_enabled' sysctl thus affect it directly. It is not a problem per se, because only administrator can set sysctl values, but it still may be surprising. Introduce PERMANENT ftrace_ops flag to amend this. If the FTRACE_OPS_FL_PERMANENT is set on any ftrace ops, the tracing cannot be disabled by disabling ftrace_enabled. Equally, a callback with the flag set cannot be registered if ftrace_enabled is disabled. Link: http://lkml.kernel.org/r/20191016113316.13415-2-mbenes@suse.cz Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-11-01livepatch: Allow to distinguish different version of system state changesPetr Mladek3-0/+53
The atomic replace runs pre/post (un)install callbacks only from the new livepatch. There are several reasons for this: + Simplicity: clear ordering of operations, no interactions between old and new callbacks. + Reliability: only new livepatch knows what changes can already be made by older livepatches and how to take over the state. + Testing: the atomic replace can be properly tested only when a newer livepatch is available. It might be too late to fix unwanted effect of callbacks from older livepatches. It might happen that an older change is not enough and the same system state has to be modified another way. Different changes need to get distinguished by a version number added to struct klp_state. The version can also be used to prevent loading incompatible livepatches. The check is done when the livepatch is enabled. The rules are: + Any completely new system state modification is allowed. + System state modifications with the same or higher version are allowed for already modified system states. + Cumulative livepatches must handle all system state modifications from already installed livepatches. + Non-cumulative livepatches are allowed to touch already modified system states. Link: http://lkml.kernel.org/r/20191030154313.13263-4-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-11-01livepatch: Basic API to track system state changesPetr Mladek2-1/+84
This is another step how to help maintaining more livepatches. One big help was the atomic replace and cumulative livepatches. These livepatches replace the already installed ones. Therefore it should be enough when each cumulative livepatch is consistent. The problems might come with shadow variables and callbacks. They might change the system behavior or state so that it is no longer safe to go back and use an older livepatch or the original kernel code. Also, a new livepatch must be able to detect changes which were made by the already installed livepatches. This is where the livepatch system state tracking gets useful. It allows to: - find whether a system state has already been modified by previous livepatches - store data needed to manipulate and restore the system state The information about the manipulated system states is stored in an array of struct klp_state. It can be searched by two new functions klp_get_state() and klp_get_prev_state(). The dependencies are going to be solved by a version field added later. The only important information is that it will be allowed to modify the same state by more non-cumulative livepatches. It is similar to allowing to modify the same function several times. The livepatch author is responsible for preventing incompatible changes. Link: http://lkml.kernel.org/r/20191030154313.13263-3-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-11-01livepatch: Keep replaced patches until post_patch callback is calledPetr Mladek3-18/+35
Pre/post (un)patch callbacks might manipulate the system state. Cumulative livepatches might need to take over the changes made by the replaced ones. For this they might need to access some data stored or referenced by the old livepatches. Therefore the replaced livepatches have to stay around until post_patch() callback is called. It is achieved by calling the free functions later. It is the same location where disabled livepatches have already been freed. Link: http://lkml.kernel.org/r/20191030154313.13263-2-pmladek@suse.com To: Jiri Kosina <jikos@kernel.org> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Nicolai Stange <nstange@suse.de> Cc: live-patching@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-08-19livepatch: Nullify obj->mod in klp_module_coming()'s error pathMiroslav Benes1-0/+1
klp_module_coming() is called for every module appearing in the system. It sets obj->mod to a patched module for klp_object obj. Unfortunately it leaves it set even if an error happens later in the function and the patched module is not allowed to be loaded. klp_is_object_loaded() uses obj->mod variable and could currently give a wrong return value. The bug is probably harmless as of now. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-07-11Merge branch 'for-linus' of ↵Linus Torvalds1-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Jiri Kosina: - stacktrace handling improvements from Miroslav benes - debug output improvements from Petr Mladek * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Remove duplicate warning about missing reliable stacktrace support Revert "livepatch: Remove reliable stacktrace check in klp_try_switch_task()" stacktrace: Remove weak version of save_stack_trace_tsk_reliable() livepatch: Use static buffer for debugging messages under rq lock livepatch: Remove stale kobj_added entries from kernel-doc descriptions
2019-06-20livepatch: Remove duplicate warning about missing reliable stacktrace supportPetr Mladek1-1/+0
WARN_ON_ONCE() could not be called safely under rq lock because of console deadlock issues. Moreover WARN_ON_ONCE() is superfluous in klp_check_stack(), because stack_trace_save_tsk_reliable() cannot return -ENOSYS thanks to klp_have_reliable_stack() check in klp_try_switch_task(). [ mbenes: changelog edited ] Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-06-20Revert "livepatch: Remove reliable stacktrace check in klp_try_switch_task()"Miroslav Benes1-0/+7
This reverts commit 1d98a69e5cef3aeb68bcefab0e67e342d6bb4dad. Commit 31adf2308f33 ("livepatch: Convert error about unsupported reliable stacktrace into a warning") weakened the enforcement for architectures to have reliable stack traces support. The system only warns now about it. It only makes sense to reintroduce the compile time checking in klp_try_switch_task() again and bail out early. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-06-15Merge tag 'trace-v5.2-rc4' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Out of range read of stack trace output - Fix for NULL pointer dereference in trace_uprobe_create() - Fix to a livepatching / ftrace permission race in the module code - Fix for NULL pointer dereference in free_ftrace_func_mapper() - A couple of build warning clean ups * tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper() module: Fix livepatch/ftrace module text permissions race tracing/uprobe: Fix obsolete comment on trace_uprobe_create() tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create() tracing: Make two symbols static tracing: avoid build warning with HAVE_NOP_MCOUNT tracing: Fix out-of-range read in trace_stack_print()
2019-06-14module: Fix livepatch/ftrace module text permissions raceJosh Poimboeuf1-0/+6
It's possible for livepatch and ftrace to be toggling a module's text permissions at the same time, resulting in the following panic: BUG: unable to handle page fault for address: ffffffffc005b1d9 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 3ea0c067 P4D 3ea0c067 PUD 3ea0e067 PMD 3cc13067 PTE 3b8a1061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 1 PID: 453 Comm: insmod Tainted: G O K 5.2.0-rc1-a188339ca5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 RIP: 0010:apply_relocate_add+0xbe/0x14c Code: fa 0b 74 21 48 83 fa 18 74 38 48 83 fa 0a 75 40 eb 08 48 83 38 00 74 33 eb 53 83 38 00 75 4e 89 08 89 c8 eb 0a 83 38 00 75 43 <89> 08 48 63 c1 48 39 c8 74 2e eb 48 83 38 00 75 32 48 29 c1 89 08 RSP: 0018:ffffb223c00dbb10 EFLAGS: 00010246 RAX: ffffffffc005b1d9 RBX: 0000000000000000 RCX: ffffffff8b200060 RDX: 000000000000000b RSI: 0000004b0000000b RDI: ffff96bdfcd33000 RBP: ffffb223c00dbb38 R08: ffffffffc005d040 R09: ffffffffc005c1f0 R10: ffff96bdfcd33c40 R11: ffff96bdfcd33b80 R12: 0000000000000018 R13: ffffffffc005c1f0 R14: ffffffffc005e708 R15: ffffffff8b2fbc74 FS: 00007f5f447beba8(0000) GS:ffff96bdff900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc005b1d9 CR3: 000000003cedc002 CR4: 0000000000360ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: klp_init_object_loaded+0x10f/0x219 ? preempt_latency_start+0x21/0x57 klp_enable_patch+0x662/0x809 ? virt_to_head_page+0x3a/0x3c ? kfree+0x8c/0x126 patch_init+0x2ed/0x1000 [livepatch_test02] ? 0xffffffffc0060000 do_one_initcall+0x9f/0x1c5 ? kmem_cache_alloc_trace+0xc4/0xd4 ? do_init_module+0x27/0x210 do_init_module+0x5f/0x210 load_module+0x1c41/0x2290 ? fsnotify_path+0x3b/0x42 ? strstarts+0x2b/0x2b ? kernel_read+0x58/0x65 __do_sys_finit_module+0x9f/0xc3 ? __do_sys_finit_module+0x9f/0xc3 __x64_sys_finit_module+0x1a/0x1c do_syscall_64+0x52/0x61 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The above panic occurs when loading two modules at the same time with ftrace enabled, where at least one of the modules is a livepatch module: CPU0 CPU1 klp_enable_patch() klp_init_object_loaded() module_disable_ro() ftrace_module_enable() ftrace_arch_code_modify_post_process() set_all_modules_text_ro() klp_write_object_relocations() apply_relocate_add() *patches read-only code* - BOOM A similar race exists when toggling ftrace while loading a livepatch module. Fix it by ensuring that the livepatch and ftrace code patching operations -- and their respective permissions changes -- are protected by the text_mutex. Link: http://lkml.kernel.org/r/ab43d56ab909469ac5d2520c5d944ad6d4abd476.1560474114.git.jpoimboe@redhat.com Reported-by: Johannes Erdfelt <johannes@erdfelt.com> Fixes: 444d13ff10fb ("modules: add ro_after_init support") Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-06-05livepatch: Use static buffer for debugging messages under rq lockPetr Mladek1-2/+1
The err_buf array uses 128 bytes of stack space. Move it off the stack by making it static. It's safe to use a shared buffer because klp_try_switch_task() is called under klp_mutex. Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner4-52/+4
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15Merge tag 'trace-v5.2' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The major changes in this tracing update includes: - Removal of non-DYNAMIC_FTRACE from 32bit x86 - Removal of mcount support from x86 - Emulating a call from int3 on x86_64, fixes live kernel patching - Consolidated Tracing Error logs file Minor updates: - Removal of klp_check_compiler_support() - kdb ftrace dumping output changes - Accessing and creating ftrace instances from inside the kernel - Clean up of #define if macro - Introduction of TRACE_EVENT_NOP() to disable trace events based on config options And other minor fixes and clean ups" * tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) x86: Hide the int3_emulate_call/jmp functions from UML livepatch: Remove klp_check_compiler_support() ftrace/x86: Remove mcount support ftrace/x86_32: Remove support for non DYNAMIC_FTRACE tracing: Simplify "if" macro code tracing: Fix documentation about disabling options using trace_options tracing: Replace kzalloc with kcalloc tracing: Fix partial reading of trace event's id file tracing: Allow RCU to run between postponed startup tests tracing: Fix white space issues in parse_pred() function tracing: Eliminate const char[] auto variables ring-buffer: Fix mispelling of Calculate tracing: probeevent: Fix to make the type of $comm string tracing: probeevent: Do not accumulate on ret variable tracing: uprobes: Re-enable $comm support for uprobe events ftrace/x86_64: Emulate call function while updating in breakpoint handler x86_64: Allow breakpoints to emulate call instructions x86_64: Add gap to int3 to allow for call emulation tracing: kdb: Allow ftdump to skip all but the last few entries tracing: Add trace_total_entries() / trace_total_entries_cpu() ...
2019-05-10livepatch: Remove klp_check_compiler_support()Jiri Kosina1-8/+0
The only purpose of klp_check_compiler_support() is to make sure that we are not using ftrace on x86 via mcount (because that's executed only after prologue has already happened, and that's too late for livepatching purposes). Now that mcount is not supported by ftrace any more, there is no need for klp_check_compiler_support() either. Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1905102346100.17054@cbobk.fhfr.pm Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-07Merge tag 'driver-core-5.2-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core/kobject updates from Greg KH: "Here is the "big" set of driver core patches for 5.2-rc1 There are a number of ACPI patches in here as well, as Rafael said they should go through this tree due to the driver core changes they required. They have all been acked by the ACPI developers. There are also a number of small subsystem-specific changes in here, due to some changes to the kobject core code. Those too have all been acked by the various subsystem maintainers. As for content, it's pretty boring outside of the ACPI changes: - spdx cleanups - kobject documentation updates - default attribute groups for kobjects - other minor kobject/driver core fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits) kobject: clean up the kobject add documentation a bit more kobject: Fix kernel-doc comment first line kobject: Remove docstring reference to kset firmware_loader: Fix a typo ("syfs" -> "sysfs") kobject: fix dereference before null check on kobj Revert "driver core: platform: Fix the usage of platform device name(pdev->name)" init/config: Do not select BUILD_BIN2C for IKCONFIG Provide in-kernel headers to make extending kernel easier kobject: Improve doc clarity kobject_init_and_add() kobject: Improve docs for kobject_add/del driver core: platform: Fix the usage of platform device name(pdev->name) livepatch: Replace klp_ktype_patch's default_attrs with groups cpufreq: schedutil: Replace default_attrs field with groups padata: Replace padata_attr_type default_attrs field with groups irqdesc: Replace irq_kobj_type's default_attrs field with groups net-sysfs: Replace ktype default_attrs field with groups block: Replace all ktype default_attrs with groups samples/kobject: Replace foo_ktype's default_attrs field with groups kobject: Add support for default attribute groups to kobj_type driver core: Postpone DMA tear-down until after devres release for probe failure ...