| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There's some confusion around if an irq that's disabled with disable_irq()
can still wake the system from sleep states such as "suspend to RAM".
Clarify this in the kernel documentation for irq_set_irq_wake() so that
it's clear that an irq can be disabled and still wake the system if it has
been marked for wakeup.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200206191521.94559-1-swboyd@chromium.org
|
|
The affinity of managed interrupts is completely handled in the kernel and
cannot be changed via the /proc/irq/* interfaces from user space. As the
kernel tries to spread out interrupts evenly accross CPUs on x86 to prevent
vector exhaustion, it can happen that a managed interrupt whose affinity
mask contains both isolated and housekeeping CPUs is routed to an isolated
CPU. As a consequence IO submitted on a housekeeping CPU causes interrupts
on the isolated CPU.
Add a new sub-parameter 'managed_irq' for 'isolcpus' and the corresponding
logic in the interrupt affinity selection code.
The subparameter indicates to the interrupt affinity selection logic that
it should try to avoid the above scenario.
This isolation is best effort and only effective if the automatically
assigned interrupt mask of a device queue contains isolated and
housekeeping CPUs. If housekeeping CPUs are online then such interrupts are
directed to the housekeeping CPU so that IO submitted on the housekeeping
CPU cannot disturb the isolated CPU.
If a queue's affinity mask contains only isolated CPUs then this parameter
has no effect on the interrupt routing decision, though interrupts are only
happening when tasks running on those isolated CPUs submit IO. IO submitted
on housekeeping CPUs has no influence on those queues.
If the affinity mask contains both housekeeping and isolated CPUs, but none
of the contained housekeeping CPUs is online, then the interrupt is also
routed to an isolated CPU. Interrupts are only delivered when one of the
isolated CPUs in the affinity mask submits IO. If one of the contained
housekeeping CPUs comes online, the CPU hotplug logic migrates the
interrupt automatically back to the upcoming housekeeping CPU. Depending on
the type of interrupt controller, this can require that at least one
interrupt is delivered to the isolated CPU in order to complete the
migration.
[ tglx: Removed unused parameter, added and edited comments/documentation
and rephrased the changelog so it contains more details. ]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200120091625.17912-1-ming.lei@redhat.com
|
|
Requesting a threaded IRQ with handler=NULL and !ONESHOT fails, but the
error message does not include the IRQ line name, which makes it harder to
find the offending driver.
Print the IRQ line name to clarify where the error comes from. Use the same
format as the other pr_err() above in the same function.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191105140854.27893-1-luca@lucaceresoli.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core irq updates from Thomas Gleixner:
"Updates from the irq departement:
- Update the interrupt spreading code so it handles numa node with
different CPU counts properly.
- A large overhaul of the ARM GiCv3 driver to support new PPI and SPI
ranges.
- Conversion of all alloc_fwnode() users to use physical addresses
instead of virtual addresses so the virtual addresses are not
leaked. The physical address is sufficient to identify the
associated interrupt chip.
- Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips.
- Enforce interrupt threading at compile time if RT is enabled.
- Small updates and improvements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
irqchip/uniphier-aidet: Use devm_platform_ioremap_resource()
irqdomain: Add the missing assignment of domain->fwnode for named fwnode
irqchip/mmp: Coexist with GIC root IRQ controller
irqchip/mmp: Mask off interrupts from other cores
irqchip/mmp: Add missing chained_irq_{enter,exit}()
irqchip/mmp: Do not use of_address_to_resource() to get mux regs
irqchip/meson-gpio: Add support for meson sm1 SoCs
dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs
genirq/affinity: Remove const qualifier from node_to_cpumask argument
genirq/affinity: Spread vectors on node according to nr_cpu ratio
genirq/affinity: Improve __irq_build_affinity_masks()
irqchip: Remove dev_err() usage after platform_get_irq()
irqchip: Add include guard to irq-partition-percpu.h
irqchip/mmp: Do not call irq_set_default_host() on DT platforms
irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map
irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803
irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks
irqchip/gic-v3: Warn about inconsistent implementations of extended ranges
irqchip/gic-v3: Add EPPI range support
...
|
|
Switch force_irqthreads from a boot time modifiable variable to a compile
time constant when CONFIG_PREEMPT_RT is enabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190816160923.12855-1-bigeasy@linutronix.de
|
|
Returning the pointer that was passed in allows us to write
slightly more idiomatic code. Convert a few users.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190704221323.24290-1-willy@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x96 apic updates from Thomas Gleixner:
"Updates for the x86 APIC interrupt handling and APIC timer:
- Fix a long standing issue with spurious interrupts which was caused
by the big vector management rework a few years ago. Robert Hodaszi
provided finally enough debug data and an excellent initial failure
analysis which allowed to understand the underlying issues.
This contains a change to the core interrupt management code which
is required to handle this correctly for the APIC/IO_APIC. The core
changes are NOOPs for most architectures except ARM64. ARM64 is not
impacted by the change as confirmed by Marc Zyngier.
- Newer systems allow to disable the PIT clock for power saving
causing panic in the timer interrupt delivery check of the IO/APIC
when the HPET timer is not enabled either. While the clock could be
turned on this would cause an endless whack a mole game to chase
the proper register in each affected chipset.
These systems provide the relevant frequencies for TSC, CPU and the
local APIC timer via CPUID and/or MSRs, which allows to avoid the
PIT/HPET based calibration. As the calibration code is the only
usage of the legacy timers on modern systems and is skipped anyway
when the frequencies are known already, there is no point in
setting up the PIT and actually checking for the interrupt delivery
via IO/APIC.
To achieve this on a wide variety of platforms, the CPUID/MSR based
frequency readout has been made more robust, which also allowed to
remove quite some workarounds which turned out to be not longer
required. Thanks to Daniel Drake for analysis, patches and
verification"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Seperate unused system vectors from spurious entry again
x86/irq: Handle spurious interrupt after shutdown gracefully
x86/ioapic: Implement irq_get_irqchip_state() callback
genirq: Add optional hardware synchronization for shutdown
genirq: Fix misleading synchronize_irq() documentation
genirq: Delay deactivation in free_irq()
x86/timer: Skip PIT initialization on modern chipsets
x86/apic: Use non-atomic operations when possible
x86/apic: Make apic_bsp_setup() static
x86/tsc: Set LAPIC timer period to crystal clock frequency
x86/apic: Rename 'lapic_timer_frequency' to 'lapic_timer_period'
x86/tsc: Use CPUID.0x16 to calculate missing crystal frequency
|
|
free_irq() ensures that no hardware interrupt handler is executing on a
different CPU before actually releasing resources and deactivating the
interrupt completely in a domain hierarchy.
But that does not catch the case where the interrupt is on flight at the
hardware level but not yet serviced by the target CPU. That creates an
interesing race condition:
CPU 0 CPU 1 IRQ CHIP
interrupt is raised
sent to CPU1
Unable to handle
immediately
(interrupts off,
deep idle delay)
mask()
...
free()
shutdown()
synchronize_irq()
release_resources()
do_IRQ()
-> resources are not available
That might be harmless and just trigger a spurious interrupt warning, but
some interrupt chips might get into a wedged state.
Utilize the existing irq_get_irqchip_state() callback for the
synchronization in free_irq().
synchronize_hardirq() is not using this mechanism as it might actually
deadlock unter certain conditions, e.g. when called with interrupts
disabled and the target CPU is the one on which the synchronization is
invoked. synchronize_irq() uses it because that function cannot be called
from non preemtible contexts as it might sleep.
No functional change intended and according to Marc the existing GIC
implementations where the driver supports the callback should be able
to cope with that core change. Famous last words.
Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.279463375@linutronix.de
|
|
The function might sleep, so it cannot be called from interrupt
context. Not even with care.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.189241552@linutronix.de
|
|
When interrupts are shutdown, they are immediately deactivated in the
irqdomain hierarchy. While this looks obviously correct there is a subtle
issue:
There might be an interrupt in flight when free_irq() is invoking the
shutdown. This is properly handled at the irq descriptor / primary handler
level, but the deactivation might completely disable resources which are
required to acknowledge the interrupt.
Split the shutdown code and deactivate the interrupt after synchronization
in free_irq(). Fixup all other usage sites where this is not an issue to
invoke the combined shutdown_and_deactivate() function instead.
This still might be an issue if the interrupt in flight servicing is
delayed on a remote CPU beyond the invocation of synchronize_irq(), but
that cannot be handled at that level and needs to be handled in the
synchronize_irq() context.
Fixes: f8264e34965a ("irqdomain: Introduce new interfaces to support hierarchy irqdomains")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.098196390@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow state reset of printk_once() calls.
- Prevent crashes when dereferencing invalid pointers in vsprintf().
Only the first byte is checked for simplicity.
- Make vsprintf warnings consistent and inlined.
- Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
modifiers.
- Some clean up of vsprintf and test_printf code.
* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Make function pointer_string static
vsprintf: Limit the length of inlined error messages
vsprintf: Avoid confusion between invalid address and value
vsprintf: Prevent crash when dereferencing invalid pointers
vsprintf: Consolidate handling of unknown pointer specifiers
vsprintf: Factor out %pO handler as kobject_string()
vsprintf: Factor out %pV handler as va_format()
vsprintf: Factor out %p[iI] handler as ip_addr_string()
vsprintf: Do not check address of well-known strings
vsprintf: Consistent %pK handling for kptr_restrict == 0
vsprintf: Shuffle restricted_pointer()
printk: Tie printk_once / printk_deferred_once into .data.once for reset
treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
lib/test_printf: Switch to bitmap_zalloc()
|
|
%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.
The changes have been produced by the following command:
git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done
And verifying the result.
Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
When irq_set_affinity_notifier() replaces the notifier, then the
reference count on the old notifier is dropped which causes it to be
freed. But nothing ensures that the old notifier is not longer queued
in the work list. If it is queued this results in a use after free and
possibly in work list corruption.
Ensure that the work is canceled before the reference is dropped.
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: marc.zyngier@arm.com
Link: https://lkml.kernel.org/r/1553439424-6529-1-git-send-email-psodagud@codeaurora.org
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
With -Wimplicit-fallthrough added to CFLAGS:
kernel/irq/manage.c: In function ‘irq_do_set_affinity’:
kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
cpumask_copy(desc->irq_common_data.affinity, mask);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/irq/manage.c:199:2: note: here
case IRQ_SET_MASK_OK_NOCOPY:
^~~~
Annotate it.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20190228213714.GA9246@embeddedor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier
- Core pseudo-NMI handling code
- Allow the default irq domain to be retrieved
- A new interrupt controller for the Loongson LS1X platform
- Affinity support for the SiFive PLIC
- Better support for the iMX irqsteer driver
- NUMA aware memory allocations for GICv3
- A handful of other fixes (i8259, GICv3, PLIC)
|
|
Pick up upstream changes to avoid conflicts for pending patches.
|
|
ready_percpu_nmi() was the previous name of prepare_percpu_nmi(). Update
request_percpu_nmi() comment with the correct function name.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reported-by: Li Wei <liwei391@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Add support for percpu_devid interrupts treated as NMIs.
Percpu_devid NMIs need to be setup/torn down on each CPU they target.
The same restrictions as for global NMIs still apply for percpu_devid NMIs.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Add functionality to allocate interrupt lines that will deliver IRQs
as Non-Maskable Interrupts. These allocations are only successful if
the irqchip provides the necessary support and allows NMI delivery for the
interrupt line.
Interrupt lines allocated for NMI delivery must be enabled/disabled through
enable_nmi/disable_nmi_nosync to keep their state consistent.
To treat a PERCPU IRQ as NMI, the interrupt must not be shared nor threaded,
the irqchip directly managing the IRQ must be the root irqchip and the
irqchip cannot be behind a slow bus.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
If all CPUs in the irq_default_affinity mask are offline when an interrupt
is initialized then irq_setup_affinity() can set an empty affinity mask for
a newly allocated interrupt.
Fix this by falling back to cpu_online_mask in case the resulting affinity
mask is zero.
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lkml.kernel.org/r/1545312957-8504-1-git-send-email-sramana@codeaurora.org
|
|
There is a plan to build the kernel with -Wimplicit-fallthrough. The
fallthrough in __irq_set_trigger() lacks an annotation. Add it.
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190114203154.17125-1-malat@debian.org
|
|
Go over the IRQ subsystem source code (including irqchip drivers) and
fix common typos in comments.
No change in functionality intended.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
|
|
Commit 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of
threaded irqs") made detection of spurious interrupts work for threaded
handlers by:
a) incrementing a counter every time the thread returns IRQ_HANDLED, and
b) checking whether that counter has increased every time the thread is
woken.
However for oneshot interrupts, the commit unmasks the interrupt before
incrementing the counter. If another interrupt occurs right after
unmasking but before the counter is incremented, that interrupt is
incorrectly considered spurious:
time
| irq_thread()
| irq_thread_fn()
| action->thread_fn()
| irq_finalize_oneshot()
| unmask_threaded_irq() /* interrupt is unmasked */
|
| /* interrupt fires, incorrectly deemed spurious */
|
| atomic_inc(&desc->threads_handled); /* counter is incremented */
v
This is observed with a hi3110 CAN controller receiving data at high volume
(from a separate machine sending with "cangen -g 0 -i -x"): The controller
signals a huge number of interrupts (hundreds of millions per day) and
every second there are about a dozen which are deemed spurious.
In theory with high CPU load and the presence of higher priority tasks, the
number of incorrectly detected spurious interrupts might increase beyond
the 99,900 threshold and cause disablement of the interrupt.
In practice it just increments the spurious interrupt count. But that can
cause people to waste time investigating it over and over.
Fix it by moving the accounting before the invocation of
irq_finalize_oneshot().
[ tglx: Folded change log update ]
Fixes: 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Akshay Bhat <akshay.bhat@timesys.com>
Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com>
Cc: stable@vger.kernel.org # v3.16+
Link: https://lkml.kernel.org/r/1dfd8bbd16163940648045495e3e9698e63b50ad.1539867047.git.lukas@wunner.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull genirq updates from Thomas Gleixner:
"The irq departement provides:
- A synchronization fix for free_irq() to synchronize just the
removed interrupt thread on shared interrupt lines.
- Consolidate the multi low level interrupt entry handling and mvoe
it to the generic code instead of adding yet another copy for
RISC-V
- Refactoring of the ARM LPI allocator and LPI exposure to the
hypervisor
- Yet another interrupt chip driver for the JZ4725B SoC
- Speed up for /proc/interrupts as people seem to love reading this
file with high frequency
- Miscellaneous fixes and updates"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
irqchip/gic-v3-its: Make its_lock a raw_spin_lock_t
genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete
openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER
arm64: Use the new GENERIC_IRQ_MULTI_HANDLER
ARM: Convert to GENERIC_IRQ_MULTI_HANDLER
irqchip: Port the ARM IRQ drivers to GENERIC_IRQ_MULTI_HANDLER
irqchip/gic-v3-its: Reduce minimum LPI allocation to 1 for PCI devices
dt-bindings: irqchip: renesas-irqc: Document r8a77980 support
dt-bindings: irqchip: renesas-irqc: Document r8a77470 support
irqchip/ingenic: Add support for the JZ4725B SoC
irqchip/stm32: Add exti0 translation for stm32mp1
genirq: Remove redundant NULL pointer check in __free_irq()
irqchip/gic-v3-its: Honor hypervisor enforced LPI range
irqchip/gic-v3: Expose GICD_TYPER in the rdist structure
irqchip/gic-v3-its: Drop chunk allocation compatibility
irqchip/gic-v3-its: Move minimum LPI requirements to individual busses
irqchip/gic-v3-its: Use full range of LPIs
irqchip/gic-v3-its: Refactor LPI allocator
genirq: Synchronize only with single thread on free_irq()
genirq: Update code comments wrt recycled thread_mask
...
|
|
The support of force threading interrupts which are set up with both a
primary and a threaded handler wreckaged the setup of regular requested
threaded interrupts (primary handler == NULL).
The reason is that it does not check whether the primary handler is set to
the default handler which wakes the handler thread. Instead it replaces the
thread handler with the primary handler as it would do with force threaded
interrupts which have been requested via request_irq(). So both the primary
and the thread handler become the same which then triggers the warnon that
the thread handler tries to wakeup a not configured secondary thread.
Fortunately this only happens when the driver omits the IRQF_ONESHOT flag
when requesting the threaded interrupt, which is normaly caught by the
sanity checks when force irq threading is disabled.
Fix it by skipping the force threading setup when a regular threaded
interrupt is requested. As a consequence the interrupt request which lacks
the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging
it.
Fixes: 2a1d3ab8986d ("genirq: Handle force threading of irqs with primary and thread handler")
Reported-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Cc: stable@vger.kernel.org
|
|
The NULL pointer check in __free_irq() triggers a 'dereference before NULL
pointer check' warning in static code analysis. It turns out that the check
is redundant because all callers have a NULL pointer check already.
Remove it.
Signed-off-by: RAGHU Halharvi <raghuhack78@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180717102009.7708-1-raghuhack78@gmail.com
|
|
When pciehp is converted to threaded IRQ handling, removal of unplugged
devices below a PCIe hotplug port happens synchronously in the IRQ thread.
Removal of devices typically entails a call to free_irq() by their drivers.
If those devices share their IRQ with the hotplug port, __free_irq()
deadlocks because it calls synchronize_irq() to wait for all hard IRQ
handlers as well as all threads sharing the IRQ to finish.
Actually it's sufficient to wait only for the IRQ thread of the removed
device, so call synchronize_hardirq() to wait for all hard IRQ handlers to
finish, but no longer for any threads. Compensate by rearranging the
control flow in irq_wait_for_interrupt() such that the device's thread is
allowed to run one last time after kthread_stop() has been called.
kthread_stop() blocks until the IRQ thread has completed. On completion
the IRQ thread clears its oneshot thread_mask bit. This is safe because
__free_irq() holds the request_mutex, thereby preventing __setup_irq() from
handing out the same oneshot thread_mask bit to a newly requested action.
Stack trace for posterity:
INFO: task irq/17-pciehp:94 blocked for more than 120 seconds.
schedule+0x28/0x80
synchronize_irq+0x6e/0xa0
__free_irq+0x15a/0x2b0
free_irq+0x33/0x70
pciehp_release_ctrl+0x98/0xb0
pcie_port_remove_service+0x2f/0x40
device_release_driver_internal+0x157/0x220
bus_remove_device+0xe2/0x150
device_del+0x124/0x340
device_unregister+0x16/0x60
remove_iter+0x1a/0x20
device_for_each_child+0x4b/0x90
pcie_port_device_remove+0x1e/0x30
pci_device_remove+0x36/0xb0
device_release_driver_internal+0x157/0x220
pci_stop_bus_device+0x7d/0xa0
pci_stop_bus_device+0x3d/0xa0
pci_stop_and_remove_bus_device+0xe/0x20
pciehp_unconfigure_device+0xb8/0x160
pciehp_disable_slot+0x84/0x130
pciehp_ist+0x158/0x190
irq_thread_fn+0x1b/0x50
irq_thread+0x143/0x1a0
kthread+0x111/0x130
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org
Link: https://lkml.kernel.org/r/d72b41309f077c8d3bee6cc08ad3662d50b5d22a.1529828292.git.lukas@wunner.de
|
|
Previously a race existed between __free_irq() and __setup_irq() wherein
the thread_mask of a just removed action could be handed out to a newly
added action and the freed irq thread would then tread on the oneshot
mask bit of the newly added irq thread in irq_finalize_oneshot():
time
| __free_irq()
| raw_spin_lock_irqsave(&desc->lock, flags);
| <remove action from linked list>
| raw_spin_unlock_irqrestore(&desc->lock, flags);
|
| __setup_irq()
| raw_spin_lock_irqsave(&desc->lock, flags);
| <traverse linked list to determine oneshot mask bit>
| raw_spin_unlock_irqrestore(&desc->lock, flags);
|
| irq_thread() of freed irq (__free_irq() waits in synchronize_irq())
| irq_thread_fn()
| irq_finalize_oneshot()
| raw_spin_lock_irq(&desc->lock);
| desc->threads_oneshot &= ~action->thread_mask;
| raw_spin_unlock_irq(&desc->lock);
v
The race was known at least since 2012 when it was documented in a code
comment by commit e04268b0effc ("genirq: Remove paranoid warnons and bogus
fixups"). The race itself is harmless as nothing touches any of the
potentially freed data after synchronize_irq().
In 2017 the race was close by commit 9114014cf4e6 ("genirq: Add mutex to
irq desc to serialize request/free_irq()"), apparently inadvertantly so
because the race is neither mentioned in the commit message nor was the
code comment updated. Make up for that.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org
Link: https://lkml.kernel.org/r/32fc25aa35ecef4b2692f57687bb7fc2a57230e2.1529828292.git.lukas@wunner.de
|
|
When the comment was reflowed to a wider format, the "*" snuck in.
Fixes: ae88a23b32fa ("irq: refactor and clean up the free_irq() code flow")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180617124018.25539-1-j.neuschaefer@gmx.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates and fixes from Thomas Gleixner:
- Fix the (late) fallout from the vector management rework causing
hlist corruption and irq descriptor reference leaks caused by a
missing sanity check.
The straight forward fix triggered another long standing issue to
surface. The pre rework code hid the issue due to being way slower,
but now the chance that user space sees an EBUSY error return when
updating irq affinities is way higher, though quite a bunch of
userspace tools do not handle it properly despite the fact that EBUSY
could be returned for at least 10 years.
It turned out that the EBUSY return can be avoided completely by
utilizing the existing delayed affinity update mechanism for irq
remapped scenarios as well. That's a bit more error handling in the
kernel, but avoids fruitless fingerpointing discussions with tool
developers.
- Decouple PHYSICAL_MASK from AMD SME as its going to be required for
the upcoming Intel memory encryption support as well.
- Handle legacy device ACPI detection properly for newer platforms
- Fix the wrong argument ordering in the vector allocation tracepoint
- Simplify the IDT setup code for the APIC=n case
- Use the proper string helpers in the MTRR code
- Remove a stale unused VDSO source file
- Convert the microcode update lock to a raw spinlock as its used in
atomic context.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Enable CMT and MBM on new Skylake stepping
x86/apic/vector: Print APIC control bits in debugfs
genirq/affinity: Defer affinity setting if irq chip is busy
x86/platform/uv: Use apic_ack_irq()
x86/ioapic: Use apic_ack_irq()
irq_remapping: Use apic_ack_irq()
x86/apic: Provide apic_ack_irq()
genirq/migration: Avoid out of line call if pending is not set
genirq/generic_pending: Do not lose pending affinity update
x86/apic/vector: Prevent hlist corruption and leaks
x86/vector: Fix the args of vector_alloc tracepoint
x86/idt: Simplify the idt_setup_apic_and_irq_gates()
x86/platform/uv: Remove extra parentheses
x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME
x86: Mark native_set_p4d() as __always_inline
x86/microcode: Make the late update update_lock a raw lock for RT
x86/mtrr: Convert to use strncpy_from_user() helper
x86/mtrr: Convert to use match_string() helper
x86/vdso: Remove unused file
x86/i8237: Register device based on FADT legacy boot flag
|
|
The case that interrupt affinity setting fails with -EBUSY can be handled
in the kernel completely by using the already available generic pending
infrastructure.
If a irq_chip::set_affinity() fails with -EBUSY, handle it like the
interrupts for which irq_chip::set_affinity() can only be invoked from
interrupt context. Copy the new affinity mask to irq_desc::pending_mask and
set the affinity pending bit. The next raised interrupt for the affected
irq will check the pending bit and try to set the new affinity from the
handler. This avoids that -EBUSY is returned when an affinity change is
requested from user space and the previous change has not been cleaned
up. The new affinity will take effect when the next interrupt is raised
from the device.
Fixes: dccfe3147b42 ("x86/vector: Simplify vector move cleanup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.819273597@linutronix.de
|
|
The interrupts are enabled/disabled so the interrupt handler can run
with enabled interrupts while serving the interrupt and not lose other
interrupts especially the timer tick.
If the system runs with force-threaded interrupts then there is no need
to enable the interrupts.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add SPDX identifiers to files
- which contain an explicit license boiler plate or reference
- which do not contain a license reference and were not updated in the
initial SPDX conversion because the license was deduced by the scanners
via EXPORT_SYMBOL_GPL as GPL2.0 only.
[ tglx: Moved adding identifiers from the patch which removes the
references/boilerplate ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de
|
|
Remove pointless references to the file name itself and condense the
information so it wastes less space.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.412095827@linutronix.de
|
|
Given that irq_to_desc() is a radix_tree_lookup and the reverse
operation is only a pointer dereference and that all callers of
__free_irq already have the desc, pass the desc instead of the irq
number.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel@pengutronix.de
Link: https://lkml.kernel.org/r/20180319105202.9794-1-u.kleine-koenig@pengutronix.de
|
|
In case of threaded interrupts the thread follows the affinity setting of
the hard interrupt. The related function uses the affinity mask which was
set by either from user space or via one of the kernel mechanisms. This
mask can be wider than the resulting effective affinity of the hard
interrupt. As a consequence the thread might become affine to a completely
different CPU.
Use the effective interrupt affinity if the architecture supports it, so
the hard interrupt and the thread stay on the same CPU.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip updates for 4.15, take #4 from Marc Zyngier
- A core irq fix for legacy cases where the irq trigger is not reported
by firmware
- A couple of GICv3/4 fixes (Kconfig, of-node refcount, error handling)
- Trivial pr_err fixes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"A rather large update for the interrupt core code and the irq chip drivers:
- Add a new bitmap matrix allocator and supporting changes, which is
used to replace the x86 vector allocator which comes with separate
pull request. This allows to replace the convoluted nested loop
allocation function in x86 with a facility which supports the
recently added property of managed interrupts proper and allows to
switch to a best effort vector reservation scheme, which addresses
problems with vector exhaustion.
- A large update to the ARM GIC-V3-ITS driver adding support for
range selectors.
- New interrupt controllers:
- Meson and Meson8 GPIO
- BCM7271 L2
- Socionext EXIU
If you expected that this will stop at some point, I have to
disappoint you. There are new ones posted already. Sigh!
- STM32 interrupt controller support for new platforms.
- A pile of fixes, cleanups and updates to the MIPS GIC driver
- The usual small fixes, cleanups and updates all over the place.
Most visible one is to move the irq chip drivers Kconfig switches
into a separate Kconfig menu"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
genirq: Fix type of shifting literal 1 in __setup_irq()
irqdomain: Drop pointless NULL check in virq_debug_show_one
genirq/proc: Return proper error code when irq_set_affinity() fails
irq/work: Use llist_for_each_entry_safe
irqchip: mips-gic: Print warning if inherited GIC base is used
irqchip/mips-gic: Add pr_fmt and reword pr_* messages
irqchip/stm32: Move the wakeup on interrupt mask
irqchip/stm32: Fix initial values
irqchip/stm32: Add stm32h7 support
dt-bindings/interrupt-controllers: Add compatible string for stm32h7
irqchip/stm32: Add multi-bank management
irqchip/stm32: Select GENERIC_IRQ_CHIP
irqchip/exiu: Add support for Socionext Synquacer EXIU controller
dt-bindings: Add description of Socionext EXIU interrupt controller
irqchip/gic-v3-its: Fix VPE activate callback return value
irqchip: mips-gic: Make IPI bitmaps static
irqchip: mips-gic: Share register writes in gic_set_type()
irqchip: mips-gic: Remove gic_vpes variable
irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
irqchip: mips-gic: Configure EIC when CPUs come online
...
|
|
If ffz() ever returns a value >= 31 then the following shift is undefined
behaviour because the literal 1 which gets shifted is treated as signed
integer.
In practice, the bug is probably harmless, since the first undefined shift
count is 31 which results - ignoring UB - in (int)(0x80000000). This gets
sign extended so bit 32-63 will be set as well and all subsequent
__setup_irq() calls would just end up hitting the -EBUSY branch.
However, a sufficiently aggressive optimizer may use the UB of 1<<31
to decide that doesn't happen, and hence elide the sign-extension
code, so that subsequent calls can indeed get ffz > 31.
In any case, the right thing to do is to make the literal 1UL.
[ tglx: For this to happen a single interrupt would have to be shared by 32
devices. Hardware like that does not exist and would have way more
problems than that. ]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171030213548.16831-1-linux@rasmusvillemoes.dk
|
|
When requesting a shared interrupt, we assume that the firmware
support code (DT or ACPI) has called irqd_set_trigger_type
already, so that we can retrieve it and check that the requester
is being reasonnable.
Unfortunately, we still have non-DT, non-ACPI systems around,
and these guys won't call irqd_set_trigger_type before requesting
the interrupt. The consequence is that we fail the request that
would have worked before.
We can either chase all these use cases (boring), or address it
in core code (easier). Let's have a per-irq_desc flag that
indicates whether irqd_set_trigger_type has been called, and
let's just check it when checking for a shared interrupt.
If it hasn't been set, just take whatever the interrupt
requester asks.
Fixes: 382bd4de6182 ("genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
It is currently unclear how to set the VCPU affinity for a percpu_devid
interrupt , since the Linux irq_data structure describes the state for
multiple interrupts, one for each physical CPU on the system. Since
each such interrupt can be associated with different VCPUs or none at
all, associating a single VCPU state with such an interrupt does not
capture the necessary semantics.
The implementers of irq_set_affinity are the Intel and AMD IOMMUs, and
the ARM GIC irqchip. The Intel and AMD callers do not appear to use
percpu_devid interrupts, and the ARM GIC implementation only checks the
pointer against NULL vs. non-NULL.
Therefore, simply update the function documentation to explain the
expected use in the context of percpu_devid interrupts, allowing future
changes or additions to irqchip implementers to do the right thing.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvm@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/1509093281-15225-13-git-send-email-cdall@linaro.org
|
|
Managed interrupts can end up in a stale state on CPU hotplug. If the
interrupt is not targeting a single CPU, i.e. the affinity mask spawns
multiple CPUs then the following can happen:
After boot:
dstate: 0x01601200
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 0
After offlining CPU 31 - 24
dstate: 0x01a31000
IRQD_IRQ_DISABLED
IRQD_IRQ_MASKED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_AFFINITY_MANAGED
IRQD_MANAGED_SHUTDOWN
node: 0
affinity: 24-31
effectiv: 24
pending: 0
Now CPU 25 gets onlined again, so it should get the effective interrupt
affinity for this interruopt, but due to the x86 interrupt affinity setter
restrictions this ends up after restarting the interrupt with:
dstate: 0x01601300
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_SETAFFINITY_PENDING
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 24-31
So the interrupt is still affine to CPU 24, which was the last CPU to go
offline of that affinity set and the move to an online CPU within 24-31,
in this case 25, is pending. This mechanism is x86/ia64 specific as those
architectures cannot move interrupts from thread context and do this when
an interrupt is actually handled. So the move is set to pending.
Whats worse is that offlining CPU 25 again results in:
dstate: 0x01601300
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_SETAFFINITY_PENDING
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 24-31
This means the interrupt has not been shut down, because the outgoing CPU
is not in the effective affinity mask, but of course nothing notices that
the effective affinity mask is pointing at an offline CPU.
In the case of restarting a managed interrupt the move restriction does not
apply, so the affinity setting can be made unconditional. This needs to be
done _before_ the interrupt is started up as otherwise the condition for
moving it from thread context would not longer be fulfilled.
With that change applied onlining CPU 25 after offlining 31-24 results in:
dstate: 0x01600200
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 25
pending:
And after offlining CPU 25:
dstate: 0x01a30000
IRQD_IRQ_DISABLED
IRQD_IRQ_MASKED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_MANAGED
IRQD_MANAGED_SHUTDOWN
node: 0
affinity: 24-31
effectiv: 25
pending:
which is the correct and expected result.
Fixes: 761ea388e8c4 ("genirq: Handle managed irqs gracefully in irq_startup()")
Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: axboe@kernel.dk
Cc: linux-scsi@vger.kernel.org
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: mpe@ellerman.id.au
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: keith.busch@intel.com
Cc: peterz@infradead.org
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
|
|
Emit a one time warning when the effective affinity mask is enabled in
Kconfig, but the interrupt chip does not update the mask in its
irq_set_affinity() callback,
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
|
|
Activation of an interrupt and startup are currently a combo
functionlity. That works so far, but upcoming changes require a strict
separation because the activation can fail in future.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Yu Chen <yu.c.chen@intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.754334077@linutronix.de
|
|
Currently the debugfs shows only information about actively used interrupts
like /proc/irq/ does. That's fine for most cases, but not helpful when
internals of allocated, but unused interrupt descriptors have to
debugged. It's also useful to provide information about all descriptors so
leaks can be debugged in a simpler way.
Move the debugfs registration to the descriptor allocation code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Yu Chen <yu.c.chen@intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.355525908@linutronix.de
|
|
__free_irq() can return a NULL irqaction for example when trying to free
already-free IRQ, but the callsite unconditionally dereferences the
returned pointer.
Fix this by adding a check and return NULL.
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20170919200412.GA29985@gmail.com
|
|
When assigning an interrupt to a vcpu, it is not unlikely that
the level of the hierarchy implementing irq_set_vcpu_affinity
is not the top level (think a generic MSI domain on top of a
virtualization aware interrupt controller).
In such a case, let's iterate over the hierarchy until we find
an irqchip implementing it.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Moving the irq_request/release_resources() callbacks out of the spinlocked,
irq disabled and bus locked region, unearthed an interesting abuse of the
irq_bus_lock/irq_bus_sync_unlock() callbacks.
The OMAP GPIO driver does merily power management inside of them. The
irq_request_resources() callback of this GPIO irqchip calls a function
which reads a GPIO register. That read aborts now because the clock of the
GPIO block is not magically enabled via the irq_bus_lock() callback.
Move the callbacks under the bus lock again to prevent this. In the
free_irq() path this requires to drop the bus_lock before calling
synchronize_irq() and reaquiring it before calling the
irq_release_resources() callback.
The bus lock can't be held because:
1) The data which has been changed between bus_lock/un_lock is cached in
the irq chip driver private data and needs to go out to the irq chip
via the slow bus (usually SPI or I2C) before calling
synchronize_irq().
That's the reason why this bus_lock/unlock magic exists in the first
place, as you cannot do SPI/I2C transactions while holding desc->lock
with interrupts disabled.
2) synchronize_irq() will actually deadlock, if there is a handler on
flight. These chips use threaded handlers for obvious reasons, as
they allow to do SPI/I2C communication. When the threaded handler
returns then bus_lock needs to be taken in irq_finalize_oneshot() as
we need to talk to the actual irq chip once more. After that the
threaded handler is marked done, which makes synchronize_irq() return.
So if we hold bus_lock accross the synchronize_irq() call, the
handler cannot mark itself done because it blocks on the bus
lock. That in turn makes synchronize_irq() wait forever on the
threaded handler to complete....
Add the missing unlock of desc->request_mutex in the error path of
__free_irq() and add a bunch of comments to explain the locking and
protection rules.
Fixes: 46e48e257360 ("genirq: Move irq resource handling out of spinlocked region")
Reported-and-tested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reported-and-tested-by: Tony Lindgren <tony@atomide.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not-longer-ranted-at-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
|
|
The irq timings infrastructure tracks when interrupts occur in order to
statistically predict te next interrupt event.
There is no point to track timer interrupts and try to predict them because
the next expiration time is already known. This can be avoided via the
IRQF_TIMER flag which is passed by timer drivers in request_irq(). It marks
the interrupt as timer based which alloes to ignore these interrupts in the
timings code.
Per CPU interrupts which are requested via request_percpu_+irq() have no
flag argument, so marking per cpu timer interrupts is not possible and they
get tracked pointlessly.
Add __request_percpu_irq() as a variant of request_percpu_irq() with a
flags argument and make request_percpu_irq() an inline wrapper passing
flags = 0.
The flag parameter is restricted to IRQF_TIMER as all other IRQF_ flags
make no sense for per cpu interrupts.
The next step is to convert all existing users of request_percpu_irq() and
then remove the wrapper and the underscores.
[ tglx: Massaged changelog ]
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: nicolas.pitre@linaro.org
Cc: vincent.guittot@linaro.org
Cc: rafael@kernel.org
Link: http://lkml.kernel.org/r/1499344144-3964-1-git-send-email-daniel.lezcano@linaro.org
|
|
No point to do memory management from a interrupt disabled spin locked
region.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Julia Cartwright <julia@ni.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: linux-rockchip@lists.infradead.org
Cc: John Keeping <john@metanate.com>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/20170629214344.196130646@linutronix.de
|
