summaryrefslogtreecommitdiffstats
path: root/kernel/gcov
AgeCommit message (Collapse)AuthorFilesLines
2019-09-15um: Enable CONFIG_CONSTRUCTORSJohannes Berg1-1/+1
We do need to call the constructors for *modules*, and at least for KASAN in the future, we must call even the kernel constructors only later when the kernel has been initialized. Instead of relying on libc to call them, emit an empty section for libc and let the kernel's CONSTRUCTORS code do the rest of the job. Tested that it indeed doesn't work in modules, and does work after the fixes in both, with a few functions with __attribute__((constructor)) in both dynamic and static builds. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-06-03gcov: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-22/+2
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also delete the dentry variable as it is never needed. Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14gcov: clang supportGreg Hackmann7-2/+611
LLVM uses profiling data that's deliberately similar to GCC, but has a very different way of exporting that data. LLVM calls llvm_gcov_init() once per module, and provides a couple of callbacks that we can use to ask for more data. We care about the "writeout" callback, which in turn calls back into compiler-rt/this module to dump all the gathered coverage data to disk: llvm_gcda_start_file() llvm_gcda_emit_function() llvm_gcda_emit_arcs() llvm_gcda_emit_function() llvm_gcda_emit_arcs() [... repeats for each function ...] llvm_gcda_summary_info() llvm_gcda_end_file() This design is much more stateless and unstructured than gcc's, and is intended to run at process exit. This forces us to keep some local state about which module we're dealing with at the moment. On the other hand, it also means we don't depend as much on how LLVM represents profiling data internally. See LLVM's lib/Transforms/Instrumentation/GCOVProfiling.cpp for more details on how this works, particularly GCOVProfiler::emitProfileArcs(), GCOVProfiler::insertCounterWriteout(), and GCOVProfiler::insertFlush(). [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20190417225328.208129-1-trong@android.com Signed-off-by: Greg Hackmann <ghackmann@android.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Tri Vo <trong@android.com> Co-developed-by: Nick Desaulniers <ndesaulniers@google.com> Co-developed-by: Tri Vo <trong@android.com> Tested-by: Trilok Soni <tsoni@quicinc.com> Tested-by: Prasad Sodagudi <psodagud@quicinc.com> Tested-by: Tri Vo <trong@android.com> Tested-by: Daniel Mentz <danielmentz@google.com> Tested-by: Petri Gynther <pgynther@google.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14gcov: clang: move common GCC code into gcc_base.cGreg Hackmann4-84/+93
Patch series "gcov: add Clang support", v4. This patch (of 3): base.c contains a few callbacks specific to GCC's gcov implementation. Move these into their own module in preparation for Clang support. Link: http://lkml.kernel.org/r/20190318025411.98014-2-trong@android.com Signed-off-by: Greg Hackmann <ghackmann@android.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Tri Vo <trong@android.com> Tested-by: Trilok Soni <tsoni@quicinc.com> Tested-by: Prasad Sodagudi <psodagud@quicinc.com> Tested-by: Tri Vo <trong@android.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Petri Gynther <pgynther@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07kernel/gcov/gcc_3_4.c: use struct_size() in kzalloc()Gustavo A. R. Silva1-4/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Link: http://lkml.kernel.org/r/20190109172445.GA15908@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08gcov: remove CONFIG_GCOV_FORMAT_AUTODETECTMasahiro Yamada2-14/+5
CONFIG_GCOV_FORMAT_AUTODETECT compiles either gcc_3_4.c or gcc_4_7.c according to your GCC version. We can achieve the equivalent behavior by setting reasonable dependency with the knowledge of the compiler version. If GCC older than 4.7 is used, GCOV_FORMAT_3_4 is the default, but users are still allowed to select GCOV_FORMAT_4_7 in case the newer format is back-ported. On the other hand, If GCC 4.7 or newer is used, there is no reason to use GCOV_FORMAT_3_4, so it should be hidden. If you downgrade the compiler to GCC 4.7 or older, oldconfig/syncconfig will display a prompt for the choice because GCOV_FORMAT_3_4 becomes visible as a new symbol. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman6-0/+6
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-12gcov: support GCC 7.1Martin Liska2-1/+9
Starting from GCC 7.1, __gcov_exit is a new symbol expected to be implemented in a profiling runtime. [akpm@linux-foundation.org: coding-style fixes] [mliska@suse.cz: v2] Link: http://lkml.kernel.org/r/e63a3c59-0149-c97e-4084-20ca8f146b26@suse.cz Link: http://lkml.kernel.org/r/8c4084fa-3885-29fe-5fc4-0d4ca199c785@suse.cz Signed-off-by: Martin Liska <mliska@suse.cz> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15gcov: add support for gcc version >= 6Florian Meier1-1/+1
Link: http://lkml.kernel.org/r/20160701130914.GA23225@styxhp Signed-off-by: Florian Meier <Florian.Meier@informatik.uni-erlangen.de> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-10gcov: disable for COMPILE_TESTArnd Bergmann1-0/+1
Enabling gcov is counterproductive to compile testing: it significantly increases the kernel image size, compile time, and it produces lots of false positive "may be used uninitialized" warnings as the result of missed optimizations. This is in line with how UBSAN_SANITIZE_ALL and PROFILE_ALL_BRANCHES work, both of which have similar problems. With an ARM allmodconfig kernel, I see the build time drop from 283 minutes CPU time to 225 minutes, and the vmlinux size drops from 43MB to 26MB. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-12-04gcov: use within_module() helper.Rusty Russell1-6/+1
An exact mapping would be within_module_core(), but at this stage (MODULE_STATE_GOING) the init section is empty, and this is clearer. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-30gcov: add support for GCC 5.1Lorenzo Stoakes2-1/+9
Fix kernel gcov support for GCC 5.1. Similar to commit a992bf836f9 ("gcov: add support for GCC 4.9"), this patch takes into account the existence of a new gcov counter (see gcc's gcc/gcov-counter.def.) Firstly, it increments GCOV_COUNTERS (to 10), which makes the data structure struct gcov_info compatible with GCC 5.1. Secondly, a corresponding counter function __gcov_merge_icall_topn (Top N value tracking for indirect calls) is included in base.c with the other gcov counters unused for kernel profiling. Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Yuan Pengfei <coolypf@qq.com> Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17gcov: fix softlockupsAndrey Ryabinin1-1/+4
gcov profiling if enabled with other heavy compile-time instrumentation like KASan could trigger following softlockups: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] Modules linked in: irq event stamp: 22823276 hardirqs last enabled at (22823275): [<ffffffff86e8d10d>] mutex_lock_nested+0x7d9/0x930 hardirqs last disabled at (22823276): [<ffffffff86e9521d>] apic_timer_interrupt+0x6d/0x80 softirqs last enabled at (22823172): [<ffffffff811ed969>] __do_softirq+0x4db/0x729 softirqs last disabled at (22823167): [<ffffffff811edfcf>] irq_exit+0x7d/0x15b CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.19.0-05245-gbb33326-dirty #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 task: ffff88006cba8000 ti: ffff88006cbb0000 task.ti: ffff88006cbb0000 RIP: kasan_mem_to_shadow+0x1e/0x1f Call Trace: strcmp+0x28/0x70 get_node_by_name+0x66/0x99 gcov_event+0x4f/0x69e gcov_enable_events+0x54/0x7b gcov_fs_init+0xf8/0x134 do_one_initcall+0x1b2/0x288 kernel_init_freeable+0x467/0x580 kernel_init+0x15/0x18b ret_from_fork+0x7c/0xb0 Kernel panic - not syncing: softlockup: hung tasks Fix this by sticking cond_resched() in gcov_enable_events(). Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-09kbuild,gcov: simplify kernel/gcov/Makefile moreMasahiro Yamada1-19/+4
CONFIG_GCOV_FORMAT_3_4 / _4_7 / _AUTODETECT are exclusive. Compare the CC version only when _AUTODETECT is enabled. This change should have no impact. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-09kbuild,gcov: simplify kernel/gcov/MakefileMasahiro Yamada1-3/+3
Kbuild descends into kernel/gcov/ directory only when CONFIG_GCOV_KERNEL is enabled. (See kernel/Makefile) CONFIG_GCOV_KERNEL check can be omitted in kernel/gcov/Makefile. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-09kbuild,gcov: remove unnecessary workaroundMasahiro Yamada1-12/+1
Since commit 371fdc77af44 (kbuild: collect shorthands into scripts/Kbuild.include), scripts/Makefile.clean includes scripts/Kbuild.include. The workaround and the comment block in kernel/gcov/Makefile are no longer necessary. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-09kbuild: do not add $(call ...) to invoke cc-version or cc-fullversionMasahiro Yamada1-1/+1
The macros cc-version, cc-fullversion and ld-version take no argument. It is not necessary to add $(call ...) to invoke them. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Helge Deller <deller@gmx.de> [parisc] Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-12-13gcov: enable GCOV_PROFILE_ALL from ARCH KconfigsRiku Voipio1-1/+4
Following the suggestions from Andrew Morton and Stephen Rothwell, Dont expand the ARCH list in kernel/gcov/Kconfig. Instead, define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures can enable. set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was previously allowed + ARM64 which I tested. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-29gcov: add ARM64 to GCOV_PROFILE_ALLRiku Voipio1-1/+1
Following up the arm testing of gcov, turns out gcov on ARM64 works fine as well. Only change needed is adding ARM64 to Kconfig depends. Tested with qemu and mach-virt Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-26ARM: 8153/1: Enable gcov support on the ARM architectureVincent Sanders1-1/+1
Enable gcov support for ARM based on original patches by David Singleton and George G. Davis Riku - updated to patch to current mainline kernel. The patch has been submitted in 2010, 2012 - for symmetry, now in 2014 too. https://lwn.net/Articles/390419/ http://marc.info/?l=linux-arm-kernel&m=133823081813044 v2: remove arch/arm/kernel from gcov disabled files Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Vincent Sanders <vincent.sanders@collabora.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-08-08kernel/gcov/fs.c: remove unnecessary null test before debugfs_removeFabian Frederick1-2/+1
This fixes checkpatch warning: WARNING: debugfs_remove(NULL) is safe this check is probably not required Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-10gcov: add support for GCC 4.9Yuan Pengfei2-0/+11
This patch handles the gcov-related changes in GCC 4.9: A new counter (time profile) is added. The total number is 9 now. A new profile merge function __gcov_merge_time_profile is added. See gcc/gcov-io.h and libgcc/libgcov-merge.c For the first change, the layout of struct gcov_info is affected. For the second one, a dummy function is added to kernel/gcov/base.c similarly. Signed-off-by: Yuan Pengfei <coolypf@qq.com> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13gcov: reuse kbasename helperAndy Shevchenko1-4/+3
To get name of the file from a pathname let's use kbasename() helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13kernel/gcov/fs.c: use pr_warn()Andrew Morton1-17/+17
pr_warning() is deprecated in favor of pr_warn() Cc: Andy Gospodarek <agospoda@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Frantisek Hrbata <fhrbata@redhat.com> Cc: Jan Stancek <jstancek@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13gcov: compile specific gcov implementation based on gcc versionFrantisek Hrbata2-1/+61
Compile the correct gcov implementation file for the specific gcc version. Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com> Cc: Jan Stancek <jstancek@redhat.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Gospodarek <agospoda@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13gcov: add support for gcc 4.7 gcov formatFrantisek Hrbata2-0/+566
The gcov in-memory format changed in gcc 4.7. The biggest change, which requires this special implementation, is that gcov_info no longer contains array of counters for each counter type for all functions and gcov_fn_info is not used for mapping of function's counters to these arrays(offset). Now each gcov_fn_info contans it's counters, which makes things a little bit easier. This is heavily based on the previous gcc_3_4.c implementation and patches provided by Peter Oberparleiter. Specially the buffer gcda implementation for iterator. [akpm@linux-foundation.org: use kmemdup() and kcalloc()] [oberpar@linux.vnet.ibm.com: gcc_4_7.c needs vmalloc.h] Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com> Cc: Jan Stancek <jstancek@redhat.com> Cc: Kees Cook <keescook@chromium.org> Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Gospodarek <agospoda@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13gcov: move gcov structs definitions to a gcc version specific fileFrantisek Hrbata4-80/+153
Since also the gcov structures(gcov_info, gcov_fn_info, gcov_ctr_info) can change between gcc releases, as shown in gcc 4.7, they cannot be defined in a common header and need to be moved to a specific gcc implemention file. This also requires to make the gcov_info structure opaque for the common code and to introduce simple helpers for accessing data inside gcov_info. Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com> Cc: Jan Stancek <jstancek@redhat.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Gospodarek <agospoda@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12kernel: replace strict_strto*() with kstrto*()Jingoo Han1-1/+1
The usage of strict_strto*() is not preferred, because strict_strto*() is obsolete. Thus, kstrto*() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11kernel/gcov: remove depends on CONFIG_EXPERIMENTALKees Cook1-1/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
2011-07-26gcov: disable CONSTRUCTORS for UMLVitaliy Ivanov1-1/+1
Selecting GCOV for UML causing configuration mismatch: warning: (GCOV_KERNEL) selects CONSTRUCTORS which has unmet direct dependencies (!UML) Constructors are not needed for UML. Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: Richard Weinberger <richard@nod.at> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15gcov: disable CONFIG_CONSTRUCTORS when not needed by CONFIG_GCOV_KERNELJosh Triplett1-1/+2
CONFIG_CONSTRUCTORS controls support for running constructor functions at kernel init time. According to commit b99b87f70c7785ab ("kernel: constructor support"), gcov (CONFIG_GCOV_KERNEL) needs this. However, CONFIG_CONSTRUCTORS currently defaults to y, with no option to disable it, and CONFIG_GCOV_KERNEL depends on it. Instead, default it to n and have CONFIG_GCOV_KERNEL select it, so that the normal case of CONFIG_GCOV_KERNEL=n will result in CONFIG_CONSTRUCTORS=n. Observed in the short list of =y values in a minimal kernel configuration. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-20Merge branch 'trivial' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits) video: change to new flag variable scsi: change to new flag variable rtc: change to new flag variable rapidio: change to new flag variable pps: change to new flag variable net: change to new flag variable misc: change to new flag variable message: change to new flag variable memstick: change to new flag variable isdn: change to new flag variable ieee802154: change to new flag variable ide: change to new flag variable hwmon: change to new flag variable dma: change to new flag variable char: change to new flag variable fs: change to new flag variable xtensa: change to new flag variable um: change to new flag variables s390: change to new flag variable mips: change to new flag variable ... Fix up trivial conflict in drivers/hwmon/Makefile
2011-03-17kernel: change to new flag variablematt mooney1-1/+1
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-02-15sh: Enable CONFIG_GCOV_PROFILE_ALL for shChris Smith1-1/+1
This patch enables gcov kernel profiling over the whole kernel for sh. Profiling of specific files individually already worked. A handful of files have to be explicitly excluded from the profiling to avoid breaking things, notably pmb.c. Signed-off-by: Chris Smith <chris.smith@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-09-09gcov: fix null-pointer dereference for certain module typesPeter Oberparleiter1-64/+180
The gcov-kernel infrastructure expects that each object file is loaded only once. This may not be true, e.g. when loading multiple kernel modules which are linked to the same object file. As a result, loading such kernel modules will result in incorrect gcov results while unloading will cause a null-pointer dereference. This patch fixes these problems by changing the gcov-kernel infrastructure so that multiple profiling data sets can be associated with one debugfs entry. It applies to 2.6.36-rc1. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reported-by: Werner Spies <werner.spies@thalesgroup.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21microblaze: Enable GCOV_PROFILE_ALLMichal Simek1-1/+1
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-08-20powerpc: Enable GCOVMichael Ellerman1-1/+1
Make it possible to enable GCOV code coverage measurement on powerpc. Lightly tested on 64-bit, seems to work as expected. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-18gcov: enable GCOV_PROFILE_ALL for x86_64Peter Oberparleiter1-1/+1
Enable gcov profiling of the entire kernel on x86_64. Required changes include disabling profiling for: * arch/kernel/acpi/realmode and arch/kernel/boot/compressed: not linked to main kernel * arch/vdso, arch/kernel/vsyscall_64 and arch/kernel/hpet: profiling causes segfaults during boot (incompatible context) Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18gcov: add gcov profiling infrastructurePeter Oberparleiter6-0/+1447
Enable the use of GCC's coverage testing tool gcov [1] with the Linux kernel. gcov may be useful for: * debugging (has this code been reached at all?) * test improvement (how do I change my test to cover these lines?) * minimizing kernel configurations (do I need this option if the associated code is never run?) The profiling patch incorporates the following changes: * change kbuild to include profiling flags * provide functions needed by profiling code * present profiling data as files in debugfs Note that on some architectures, enabling gcc's profiling option "-fprofile-arcs" for the entire kernel may trigger compile/link/ run-time problems, some of which are caused by toolchain bugs and others which require adjustment of architecture code. For this reason profiling the entire kernel is initially restricted to those architectures for which it is known to work without changes. This restriction can be lifted once an architecture has been tested and found compatible with gcc's profiling. Profiling of single files or directories is still available on all platforms (see config help text). [1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>