summaryrefslogtreecommitdiffstats
path: root/kernel/exit.c
AgeCommit message (Collapse)AuthorFilesLines
2016-12-12Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The time/timekeeping/timer folks deliver with this update: - Fix a reintroduced signed/unsigned issue and cleanup the whole signed/unsigned mess in the timekeeping core so this wont happen accidentaly again. - Add a new trace clock based on boot time - Prevent injection of random sleep times when PM tracing abuses the RTC for storage - Make posix timers configurable for real tiny systems - Add tracepoints for the alarm timer subsystem so timer based suspend wakeups can be instrumented - The usual pile of fixes and updates to core and drivers" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) timekeeping: Use mul_u64_u32_shr() instead of open coding it timekeeping: Get rid of pointless typecasts timekeeping: Make the conversion call chain consistently unsigned timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion alarmtimer: Add tracepoints for alarm timers trace: Update documentation for mono, mono_raw and boot clock trace: Add an option for boot clock as trace clock timekeeping: Add a fast and NMI safe boot clock timekeeping/clocksource_cyc2ns: Document intended range limitation timekeeping: Ignore the bogus sleep time if pm_trace is enabled selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous" clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map() arm64: dts: rockchip: Arch counter doesn't tick in system suspend clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend posix-timers: Make them configurable posix_cpu_timers: Move the add_device_randomness() call to a proper place timer: Move sys_alarm from timer.c to itimer.c ptp_clock: Allow for it to be optional Kconfig: Regenerate *.c_shipped files after previous changes ...
2016-11-22sched/autogroup: Do not use autogroup->tg in zombie threadsOleg Nesterov1-0/+1
Exactly because for_each_thread() in autogroup_move_group() can't see it and update its ->sched_task_group before _put() and possibly free(). So the exiting task needs another sched_move_task() before exit_notify() and we need to re-introduce the PF_EXITING (or similar) check removed by the previous change for another reason. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hartsjc@redhat.com Cc: vbendel@redhat.com Cc: vlovejoy@redhat.com Link: http://lkml.kernel.org/r/20161114184612.GA15968@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-16posix-timers: Make them configurableNicolas Pitre1-2/+9
Some embedded systems have no use for them. This removes about 25KB from the kernel binary size when configured out. Corresponding syscalls are routed to a stub logging the attempt to use those syscalls which should be enough of a clue if they were disabled without proper consideration. They are: timer_create, timer_gettime: timer_getoverrun, timer_settime, timer_delete, clock_adjtime, setitimer, getitimer, alarm. The clock_settime, clock_gettime, clock_getres and clock_nanosleep syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast majority of use cases with very little code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-16posix_cpu_timers: Move the add_device_randomness() call to a proper placeNicolas Pitre1-0/+4
There is no logical relation between add_device_randomness() and posix_cpu_timers_exit(). Let's move the former to where the later is called. This way, when posix-cpu-timers.c is compiled out, there is no need to worry about not losing a call to add_device_randomness(). Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Richard Cochran <richardcochran@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-6-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-07mm, oom: enforce exit_oom_victim on current taskTetsuo Handa1-1/+1
There are no users of exit_oom_victim on !current task anymore so enforce the API to always work on the current. Link: http://lkml.kernel.org/r/1472119394-11342-8-git-send-email-mhocko@kernel.org Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-22sched/core: Optimize __schedule()Peter Zijlstra1-24/+2
Oleg noted that by making do_exit() use __schedule() for the TASK_DEAD context switch, we can avoid the TASK_DEAD special case currently in __schedule() because that avoids the extra preempt_disable() from schedule(). In order to facilitate this, create a do_task_dead() helper which we place in the scheduler code, such that it can access __schedule(). Also add some __noreturn annotations to the functions, there's no coming back from do_exit(). Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Cheng Chao <cs.os.kernel@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: chris@chris-wilson.co.uk Cc: tj@kernel.org Link: http://lkml.kernel.org/r/20160913163729.GB5012@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-01mm, mempolicy: task->mempolicy must be NULL before dropping final referenceDavid Rientjes1-6/+1
KASAN allocates memory from the page allocator as part of kmem_cache_free(), and that can reference current->mempolicy through any number of allocation functions. It needs to be NULL'd out before the final reference is dropped to prevent a use-after-free bug: BUG: KASAN: use-after-free in alloc_pages_current+0x363/0x370 at addr ffff88010b48102c CPU: 0 PID: 15425 Comm: trinity-c2 Not tainted 4.8.0-rc2+ #140 ... Call Trace: dump_stack kasan_object_err kasan_report_error __asan_report_load2_noabort alloc_pages_current <-- use after free depot_save_stack save_stack kasan_slab_free kmem_cache_free __mpol_put <-- free do_exit This patch sets current->mempolicy to NULL before dropping the final reference. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1608301442180.63329@chino.kir.corp.google.com Fixes: cd11016e5f52 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02kernel/exit.c: quieten greatest stack depth printkAnton Blanchard1-1/+1
Many targets enable CONFIG_DEBUG_STACK_USAGE, and while the information is useful, it isn't worthy of pr_warn(). Reduce it to pr_info(). Link: http://lkml.kernel.org/r/1466982072-29836-1-git-send-email-anton@ozlabs.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-25Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-0/+76
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - introduce and use task_rcu_dereference()/try_get_task_struct() to fix and generalize task_struct handling (Oleg Nesterov) - do various per entity load tracking (PELT) fixes and optimizations (Peter Zijlstra) - cputime virt-steal time accounting enhancements/fixes (Wanpeng Li) - introduce consolidated cputime output file cpuacct.usage_all and related refactorings (Zhao Lei) - ... plus misc fixes and enhancements * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Panic on scheduling while atomic bugs if kernel.panic_on_warn is set sched/cpuacct: Introduce cpuacct.usage_all to show all CPU stats together sched/cpuacct: Use loop to consolidate code in cpuacct_stats_show() sched/cpuacct: Merge cpuacct_usage_index and cpuacct_stat_index enums sched/fair: Rework throttle_count sync sched/core: Fix sched_getaffinity() return value kerneldoc comment sched/fair: Reorder cgroup creation code sched/fair: Apply more PELT fixes sched/fair: Fix PELT integrity for new tasks sched/cgroup: Fix cpu_cgroup_fork() handling sched/fair: Fix PELT integrity for new groups sched/fair: Fix and optimize the fork() path sched/cputime: Add steal time support to full dynticks CPU time accounting sched/cputime: Fix prev steal time accouting during CPU hotplug KVM: Fix steal clock warp during guest CPU hotplug sched/debug: Always show 'nr_migrations' sched/fair: Use task_rcu_dereference() sched/api: Introduce task_rcu_dereference() and try_get_task_struct() sched/idle: Optimize the generic idle loop sched/fair: Fix the wrong throttled clock time for cfs_rq_clock_task()
2016-06-14locking/spinlock: Update spin_unlock_wait() usersPeter Zijlstra1-2/+6
With the modified semantics of spin_unlock_wait() a number of explicit barriers can be removed. Also update the comment for the do_exit() usecase, as that was somewhat stale/obscure. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-03sched/api: Introduce task_rcu_dereference() and try_get_task_struct()Oleg Nesterov1-0/+76
Generally task_struct is only protected by RCU if it was found on a RCU protected list (say, for_each_process() or find_task_by_vpid()). As Kirill pointed out rq->curr isn't protected by RCU, the scheduler drops the (potentially) last reference without RCU gp, this means that we need to fix the code which uses foreign_rq->curr under rcu_read_lock(). Add a new helper which can be used to dereference rq->curr or any other pointer to task_struct assuming that it should be cleared or updated before the final put_task_struct(). It returns non-NULL only if this task can't go away before rcu_read_unlock(). ( Also add try_get_task_struct() to make it easier to use this API correctly. ) Suggested-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> [ Updated comments; added try_get_task_struct()] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@parallels.com> Link: http://lkml.kernel.org/r/20160518170218.GY3192@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-23wait: allow sys_waitid() to accept __WNOTHREAD/__WCLONE/__WALLOleg Nesterov1-1/+2
I see no reason why waitid() can't support other linux-specific flags allowed in sys_wait4(). In particular this change can help if we reconsider the previous change ("wait/ptrace: assume __WALL if the child is traced") which adds the "automagical" __WALL for debugger. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: <syzkaller@googlegroups.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23wait/ptrace: assume __WALL if the child is tracedOleg Nesterov1-9/+20
The following program (simplified version of generated by syzkaller) #include <pthread.h> #include <unistd.h> #include <sys/ptrace.h> #include <stdio.h> #include <signal.h> void *thread_func(void *arg) { ptrace(PTRACE_TRACEME, 0,0,0); return 0; } int main(void) { pthread_t thread; if (fork()) return 0; while (getppid() != 1) ; pthread_create(&thread, NULL, thread_func, NULL); pthread_join(thread, NULL); return 0; } creates an unreapable zombie if /sbin/init doesn't use __WALL. This is not a kernel bug, at least in a sense that everything works as expected: debugger should reap a traced sub-thread before it can reap the leader, but without __WALL/__WCLONE do_wait() ignores sub-threads. Unfortunately, it seems that /sbin/init in most (all?) distributions doesn't use it and we have to change the kernel to avoid the problem. Note also that most init's use sys_waitid() which doesn't allow __WALL, so the necessary user-space fix is not that trivial. This patch just adds the "ptrace" check into eligible_child(). To some degree this matches the "tsk->ptrace" in exit_notify(), ->exit_signal is mostly ignored when the tracee reports to debugger. Or WSTOPPED, the tracer doesn't need to set this flag to wait for the stopped tracee. This obviously means the user-visible change: __WCLONE and __WALL no longer have any meaning for debugger. And I can only hope that this won't break something, but at least strace/gdb won't suffer. We could make a more conservative change. Say, we can take __WCLONE into account, or !thread_group_leader(). But it would be nice to not complicate these historical/confusing checks. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20exit_thread: accept a task parameter to be exitedJiri Slaby1-1/+1
We need to call exit_thread from copy_process in a fail path. So make it accept task_struct as a parameter. [v2] * s390: exit_thread_runtime_instr doesn't make sense to be called for non-current tasks. * arm: fix the comment in vfp_thread_copy * change 'me' to 'tsk' for task_struct * now we can change only archs that actually have exit_thread [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address spaceMichal Hocko1-1/+1
When oom_reaper manages to unmap all the eligible vmas there shouldn't be much of the freable memory held by the oom victim left anymore so it makes sense to clear the TIF_MEMDIE flag for the victim and allow the OOM killer to select another task. The lack of TIF_MEMDIE also means that the victim cannot access memory reserves anymore but that shouldn't be a problem because it would get the access again if it needs to allocate and hits the OOM killer again due to the fatal_signal_pending resp. PF_EXITING check. We can safely hide the task from the OOM killer because it is clearly not a good candidate anymore as everyhing reclaimable has been torn down already. This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE and thus hold off further global OOM killer actions granted the oom reaper is able to take mmap_sem for the associated mm struct. This is not guaranteed now but further steps should make sure that mmap_sem for write should be blocked killable which will help to reduce such a lock contention. This is not done by this patch. Note that exit_oom_victim might be called on a remote task from __oom_reap_task now so we have to check and clear the flag atomically otherwise we might race and underflow oom_victims or wake up waiters too early. Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22kernel: add kcov code coverageDmitry Vyukov1-0/+2
kcov provides code coverage collection for coverage-guided fuzzing (randomized testing). Coverage-guided fuzzing is a testing technique that uses coverage feedback to determine new interesting inputs to a system. A notable user-space example is AFL (http://lcamtuf.coredump.cx/afl/). However, this technique is not widely used for kernel testing due to missing compiler and kernel support. kcov does not aim to collect as much coverage as possible. It aims to collect more or less stable coverage that is function of syscall inputs. To achieve this goal it does not collect coverage in soft/hard interrupts and instrumentation of some inherently non-deterministic or non-interesting parts of kernel is disbled (e.g. scheduler, locking). Currently there is a single coverage collection mode (tracing), but the API anticipates additional collection modes. Initially I also implemented a second mode which exposes coverage in a fixed-size hash table of counters (what Quentin used in his original patch). I've dropped the second mode for simplicity. This patch adds the necessary support on kernel side. The complimentary compiler support was added in gcc revision 231296. We've used this support to build syzkaller system call fuzzer, which has found 90 kernel bugs in just 2 months: https://github.com/google/syzkaller/wiki/Found-Bugs We've also found 30+ bugs in our internal systems with syzkaller. Another (yet unexplored) direction where kcov coverage would greatly help is more traditional "blob mutation". For example, mounting a random blob as a filesystem, or receiving a random blob over wire. Why not gcov. Typical fuzzing loop looks as follows: (1) reset coverage, (2) execute a bit of code, (3) collect coverage, repeat. A typical coverage can be just a dozen of basic blocks (e.g. an invalid input). In such context gcov becomes prohibitively expensive as reset/collect coverage steps depend on total number of basic blocks/edges in program (in case of kernel it is about 2M). Cost of kcov depends only on number of executed basic blocks/edges. On top of that, kernel requires per-thread coverage because there are always background threads and unrelated processes that also produce coverage. With inlined gcov instrumentation per-thread coverage is not possible. kcov exposes kernel PCs and control flow to user-space which is insecure. But debugfs should not be mapped as user accessible. Based on a patch by Quentin Casasnovas. [akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode'] [akpm@linux-foundation.org: unbreak allmodconfig] [akpm@linux-foundation.org: follow x86 Makefile layout standards] Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: syzkaller <syzkaller@googlegroups.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Tavis Ormandy <taviso@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kees Cook <keescook@google.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: David Drysdale <drysdale@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20exit: remove unneeded declaration of exit_mm()Dmitry Safonov1-2/+0
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20ptrace: task_stopped_code(ptrace => true) can't see TASK_STOPPED taskOleg Nesterov1-2/+1
task_stopped_code()->task_is_stopped_or_traced() doesn't look right, the traced task must never be TASK_STOPPED. We can not add WARN_ON(task_is_stopped(p)), but this is only because do_wait() can race with PTRACE_ATTACH from another thread. [akpm@linux-foundation.org: teeny cleanup] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Roland McGrath <roland@hack.frob.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Pedro Alves <palves@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-03Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "The main changes in this cycle were: - sched/fair load tracking fixes and cleanups (Byungchul Park) - Make load tracking frequency scale invariant (Dietmar Eggemann) - sched/deadline updates (Juri Lelli) - stop machine fixes, cleanups and enhancements for bugs triggered by CPU hotplug stress testing (Oleg Nesterov) - scheduler preemption code rework: remove PREEMPT_ACTIVE and related cleanups (Peter Zijlstra) - Rework the sched_info::run_delay code to fix races (Peter Zijlstra) - Optimize per entity utilization tracking (Peter Zijlstra) - ... misc other fixes, cleanups and smaller updates" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) sched: Don't scan all-offline ->cpus_allowed twice if !CONFIG_CPUSETS sched: Move cpu_active() tests from stop_two_cpus() into migrate_swap_stop() sched: Start stopper early stop_machine: Kill cpu_stop_threads->setup() and cpu_stop_unpark() stop_machine: Kill smp_hotplug_thread->pre_unpark, introduce stop_machine_unpark() stop_machine: Change cpu_stop_queue_two_works() to rely on stopper->enabled stop_machine: Introduce __cpu_stop_queue_work() and cpu_stop_queue_two_works() stop_machine: Ensure that a queued callback will be called before cpu_stop_park() sched/x86: Fix typo in __switch_to() comments sched/core: Remove a parameter in the migrate_task_rq() function sched/core: Drop unlikely behind BUG_ON() sched/core: Fix task and run queue sched_info::run_delay inconsistencies sched/numa: Fix task_tick_fair() from disabling numa_balancing sched/core: Add preempt_count invariant check sched/core: More notrace annotations sched/core: Kill PREEMPT_ACTIVE sched/core, sched/x86: Kill thread_info::saved_preempt_count sched/core: Simplify preempt_count tests sched/core: Robustify preemption leak checks sched/core: Stop setting PREEMPT_ACTIVE ...
2015-10-06rcu: Move preemption disabling out of __srcu_read_lock()Paul E. McKenney1-0/+2
Currently, __srcu_read_lock() cannot be invoked from restricted environments because it contains calls to preempt_disable() and preempt_enable(), both of which can invoke lockdep, which is a bad idea in some restricted execution modes. This commit therefore moves the preempt_disable() and preempt_enable() from __srcu_read_lock() to srcu_read_lock(). It also inserts the preempt_disable() and preempt_enable() around the call to __srcu_read_lock() in do_exit(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-10-06sched/core: Robustify preemption leak checksPeter Zijlstra1-1/+3
When we warn about a preempt_count leak; reset the preempt_count to the known good value such that the problem does not ripple forward. This is most important on x86 which has a per cpu preempt_count that is not saved/restored (after this series). So if you schedule with an invalid (!2*PREEMPT_DISABLE_OFFSET) preempt_count the next task is messed up too. Enforcing this invariant limits the borkage to just the one task. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-07kernel: exit: fix typo in commentFrans Klaver1-1/+1
s,critiera,criteria, While at it, add a comma, because it makes sense grammatically. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-06-25exit,stats: /* obey this comment */Rik van Riel1-1/+1
There is a helpful comment in do_exit() that states we sync the mm's RSS info before statistics gathering. The function that does the statistics gathering is called right above that comment. Change the code to obey the comment. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: oom_kill: clean up victim marking and exiting interfacesJohannes Weiner1-1/+1
Rename unmark_oom_victim() to exit_oom_victim(). Marking and unmarking are related in functionality, but the interface is not symmetrical at all: one is an internal OOM killer function used during the killing, the other is for an OOM victim to signal its own death on exit later on. This has locking implications, see follow-up changes. While at it, rename mark_tsk_oom_victim() to mark_oom_victim(), which is easier on the eye. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-12Remove execution domain supportRichard Weinberger1-2/+0
All users of exec_domain are gone, now we can get rid of that abandoned feature. To not break existing userspace we keep a dummy /proc/execdomains file which will always contain "0-0 Linux [kernel]". Signed-off-by: Richard Weinberger <richard@nod.at>
2015-02-11oom, PM: make OOM detection in the freezer path racelessMichal Hocko1-1/+2
Commit 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: Michal Hocko <mhocko@suse.cz> Suggested-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11oom: add helpers for setting and clearing TIF_MEMDIEMichal Hocko1-1/+1
This patchset addresses a race which was described in the changelog for 5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend"): : PM freezer relies on having all tasks frozen by the time devices are : getting frozen so that no task will touch them while they are getting : frozen. But OOM killer is allowed to kill an already frozen task in order : to handle OOM situtation. In order to protect from late wake ups OOM : killer is disabled after all tasks are frozen. This, however, still keeps : a window open when a killed task didn't manage to die by the time : freeze_processes finishes. The original patch hasn't closed the race window completely because that would require a more complex solution as it can be seen by this patchset. The primary motivation was to close the race condition between OOM killer and PM freezer _completely_. As Tejun pointed out, even though the race condition is unlikely the harder it would be to debug weird bugs deep in the PM freezer when the debugging options are reduced considerably. I can only speculate what might happen when a task is still runnable unexpectedly. On a plus side and as a side effect the oom enable/disable has a better (full barrier) semantic without polluting hot paths. I have tested the series in KVM with 100M RAM: - many small tasks (20M anon mmap) which are triggering OOM continually - s2ram which resumes automatically is triggered in a loop echo processors > /sys/power/pm_test while true do echo mem > /sys/power/state sleep 1s done - simple module which allocates and frees 20M in 8K chunks. If it sees freezing(current) then it tries another round of allocation before calling try_to_freeze - debugging messages of PM stages and OOM killer enable/disable/fail added and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before it wakes up waiters. - rebased on top of the current mmotm which means some necessary updates in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but I think this should be OK because __thaw_task shouldn't interfere with any locking down wake_up_process. Oleg? As expected there are no OOM killed tasks after oom is disabled and allocations requested by the kernel thread are failing after all the tasks are frozen and OOM disabled. I wasn't able to catch a race where oom_killer_disable would really have to wait but I kinda expected the race is really unlikely. [ 242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB [ 243.628071] Unmarking 2992 OOM victim. oom_victims: 1 [ 243.636072] (elapsed 2.837 seconds) done. [ 243.641985] Trying to disable OOM killer [ 243.643032] Waiting for concurent OOM victims [ 243.644342] OOM killer disabled [ 243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done. [ 243.652983] Suspending console(s) (use no_console_suspend to debug) [ 243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010 [...] [ 243.992600] PM: suspend of devices complete after 336.667 msecs [ 243.993264] PM: late suspend of devices complete after 0.660 msecs [ 243.994713] PM: noirq suspend of devices complete after 1.446 msecs [ 243.994717] ACPI: Preparing to enter system sleep state S3 [ 243.994795] PM: Saving platform NVS memory [ 243.994796] Disabling non-boot CPUs ... The first 2 patches are simple cleanups for OOM. They should go in regardless the rest IMO. Patches 3 and 4 are trivial printk -> pr_info conversion and they should go in ditto. The main patch is the last one and I would appreciate acks from Tejun and Rafael. I think the OOM part should be OK (except for __thaw_task vs. task_lock where a look from Oleg would appreciated) but I am not so sure I haven't screwed anything in the freezer code. I have found several surprises there. This patch (of 5): This patch is just a preparatory and it doesn't introduce any functional change. Note: I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to wait for the oom victim and to prevent from new killing. This is just a side effect of the flag. The primary meaning is to give the oom victim access to the memory reserves and that shouldn't be necessary here. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08exit: fix race between wait_consider_task() and wait_task_zombie()Oleg Nesterov1-3/+9
wait_consider_task() checks EXIT_ZOMBIE after EXIT_DEAD/EXIT_TRACE and both checks can fail if we race with EXIT_ZOMBIE -> EXIT_DEAD/EXIT_TRACE change in between, gcc needs to reload p->exit_state after security_task_wait(). In this case ->notask_error will be wrongly cleared and do_wait() can hang forever if it was the last eligible child. Many thanks to Arne who carefully investigated the problem. Note: this bug is very old but it was pure theoretical until commit b3ab03160dfa ("wait: completely ignore the EXIT_DEAD tasks"). Before this commit "-O2" was probably enough to guarantee that compiler won't read ->exit_state twice. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Arne Goedeke <el@laramies.com> Tested-by: Arne Goedeke <el@laramies.com> Cc: <stable@vger.kernel.org> [3.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-14Merge tag 'tty-3.19-rc1' of ↵Linus Torvalds1-21/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the big tty/serial driver update for 3.19-rc1. There are a number of TTY core changes/fixes in here from Peter Hurley that have all been teted in linux-next for a long time now. There are also the normal serial driver updates as well, full details in the changelog below" * tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (219 commits) serial: pxa: hold port.lock when reporting modem line changes tty-hvsi_lib: Deletion of an unnecessary check before the function call "tty_kref_put" tty: Deletion of unnecessary checks before two function calls n_tty: Fix read_buf race condition, increment read_head after pushing data serial: of-serial: add PM suspend/resume support Revert "serial: of-serial: add PM suspend/resume support" Revert "serial: of-serial: fix up PM ops on no_console_suspend and port type" serial: 8250: don't attempt a trylock if in sysrq serial: core: Add big-endian iotype serial: samsung: use port->fifosize instead of hardcoded values serial: samsung: prefer to use fifosize from driver data serial: samsung: fix style problems serial: samsung: wait for transfer completion before clock disable serial: icom: fix error return code serial: tegra: clean up tty-flag assignments serial: Fix io address assign flow with Fintek PCI-to-UART Product serial: mxs-auart: fix tx_empty against shift register serial: mxs-auart: fix gpio change detection on interrupt serial: mxs-auart: Fix mxs_auart_set_ldisc() serial: 8250_dw: Use 64-bit access for OCTEON. ...
2014-12-10exit: exit_notify: re-use "dead" list to autoreap currentOleg Nesterov1-4/+2
After the previous change we can add just the exiting EXIT_DEAD task to the "dead" list and remove another release_task(tsk). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: call forget_original_parent() under tasklist_lockOleg Nesterov1-24/+23
Shift "release dead children" loop from forget_original_parent() to its caller, exit_notify(). It is safe to reap them even if our parent reaps us right after we drop tasklist_lock, those children no longer have any connection to the exiting task. And this allows us to avoid write_lock_irq(tasklist_lock) right after it was released by forget_original_parent(), we can simply call it with tasklist_lock held. While at it, move the comment about forget_original_parent() up to this function. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: avoid find_new_reaper() if no childrenOleg Nesterov1-0/+3
Now that pid_ns logic was isolated we can change forget_original_parent() to return right after find_child_reaper() when father->children is empty, there is nothing to reparent in this case. In particular this avoids find_alive_thread() and this can help if the whole process exits and it has a lot of PF_EXITING threads at the start of the thread list, this can easily lead to O(nr_threads ** 2) iterations. Trivial test case (tested under KVM, 2 CPUs): static void *tfunc(void *arg) { pause(); return NULL; } static int child(unsigned int nt) { pthread_t pt; while (nt--) assert(pthread_create(&pt, NULL, tfunc, NULL) == 0); pthread_kill(pt, SIGTRAP); pause(); return 0; } int main(int argc, const char *argv[]) { int stat; unsigned int nf = atoi(argv[1]); unsigned int nt = atoi(argv[2]); while (nf--) { if (!fork()) return child(nt); wait(&stat); assert(stat == SIGTRAP); } return 0; } $ time ./test 16 16536 shows: real user sys - 5m37.628s 0m4.437s 8m5.560s + 0m50.032s 0m7.130s 1m4.927s Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: introduce find_alive_thread()Oleg Nesterov1-13/+19
Add the new simple helper to factor out the for_each_thread() code in find_child_reaper() and find_new_reaper(). It can also simplify the potential PF_EXITING -> exit_state change, plus perhaps we can change this code to take SIGNAL_GROUP_EXIT into account. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: introduce find_child_reaper()Oleg Nesterov1-21/+35
find_new_reaper() does 2 completely different things. Not only it finds a reaper, it also updates pid_ns->child_reaper or kills the whole namespace if the caller is ->child_reaper. Now that has_child_subreaper logic doesn't depend on child_reaper check we can move that pid_ns code into a separate helper. IMHO this makes the code more clean, and this allows the next changes. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: document the ->has_child_subreaper checksOleg Nesterov1-8/+6
Swap the "init_task" and same_thread_group() checks. This way it is more simple to document these checks and we can remove the link to the previous discussion on lkml. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper()Oleg Nesterov1-5/+3
Change find_new_reaper() to use for_each_thread() instead of deprecated while_each_thread(). We do not bother to check "thread != father" in the 1st loop, we can rely on PF_EXITING check. Note: this means the minor behavioural change: for_each_thread() starts from the group leader. But this should be fine, nobody should make any assumption about do_wait(__WNOTHREAD) when it comes to reparented tasks. And this can avoid the pointless reparenting to a short-living thread While zombie leaders are not that common. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparentingOleg Nesterov1-2/+4
find_new_reaper() assumes that "has_child_subreaper" logic is safe as long as we are not the exiting ->child_reaper and this is doubly wrong: 1. In fact it is safe if "pid_ns->child_reaper == father"; there must be no children after zap_pid_ns_processes() returns, so it doesn't matter what we return in this case and even pid_ns->child_reaper is wrong otherwise: we can't reparent to ->child_reaper == current. This is not a bug, but this is confusing. 2. It is not safe if we are not pid_ns->child_reaper but from the same thread group. We drop tasklist_lock before zap_pid_ns_processes(), so another thread can lock it and choose the new reaper from the upper namespace if has_child_subreaper == T, and this is obviously wrong. This is not that bad, zap_pid_ns_processes() won't return until the the new reaper reaps all zombies, but this should be fixed anyway. We could change for_each_thread() loop to use ->exit_state instead of PF_EXITING which we had to use until 8aac62706ada, or we could change copy_signal() to check CLONE_NEWPID before setting has_child_subreaper, but lets change this code so that it is clear we can't look outside of our namespace, otherwise same_thread_group(reaper, child_reaper) check will look wrong and confusing anyway. We can simply start from "father" and fix the problem. We can't wrongly return a thread from the same thread group if ->is_child_subreaper == T, we know that all threads have PF_EXITING set. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparentingOleg Nesterov1-1/+1
The ->has_child_subreaper code in find_new_reaper() finds alive "thread" but returns another "reaper" thread which can be dead. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Lennart Poettering <lennart@poettering.net> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: release_task: fix the comment about group leader accountingOleg Nesterov1-7/+4
Contrary to what the comment in __exit_signal() says we do account the group leader. Fix this and explain why. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: wait: drop tasklist_lock before psig->c* accountingOleg Nesterov1-7/+5
wait_task_zombie() no longer needs tasklist_lock to accumulate the psig->c* counters, we can drop it right after cmpxchg(exit_state). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: wait: don't use zombie->real_parentOleg Nesterov1-12/+11
1. wait_task_zombie() uses p->real_parent to get psig/siglock. This is correct but needs tasklist_lock, ->real_parent can exit. We can use "current" instead. This is our natural child, its parent must be our sub-thread. 2. Read psig/sig outside of ->siglock, ->signal is no longer protected by this lock. 3. Fix the outdated comments about tasklist_lock. We can not race with __exit_signal(), the whole thread group is dead, nobody but us can call it. Also clarify the usage of ->stats_lock and ->siglock. Note: thread_group_cputime_adjusted() is sub-optimal in this case, we probably want to export cputime_adjust() to avoid thread_group_cputime(). The comment says "all threads" but there are no other threads. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: wait: cleanup the ptrace_reparented() checksOleg Nesterov1-8/+6
Now that EXIT_DEAD is the terminal state we can kill "int traced" variable and check "state == EXIT_DEAD" instead to cleanup the code. In particular, this way it is clear that the check obviously doesn't need tasklist_lock. Also fix the type of "unsigned long state", "long" was always wrong although this doesn't matter because cmpxchg/xchg uses typeof(*ptr). [akpm@linux-foundation.org: don't make me google the C Operator Precedence table] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: ptrace: shift "reap dead" code from exit_ptrace() to ↵Oleg Nesterov1-6/+4
forget_original_parent() Now that forget_original_parent() uses ->ptrace_entry for EXIT_DEAD tasks, we can simply pass "dead_children" list to exit_ptrace() and remove another release_task() loop. Plus this way we do not need to drop and reacquire tasklist_lock. Also shift the list_empty(ptraced) check, if we want this optimization it makes sense to eliminate the function call altogether. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: cleanup the usage of reparent_leader()Oleg Nesterov1-13/+9
1. Now that reparent_leader() doesn't abuse ->sibling we can shift list_move_tail() from reparent_leader() to forget_original_parent() and turn it into a single list_splice_tail_init(). This also makes BUG_ON(!list_empty()) and list_for_each_entry_safe() unnecessary. 2. This also allows to shift the same_thread_group() check, it looks a bit more clear in the caller. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: cleanup the changing of ->parentOleg Nesterov1-8/+5
1. Cosmetic, but "if (t->parent == father)" looks a bit confusing. We need to change t->parent if and only if t is not traced. 2. If we actually want this BUG_ON() to ensure that parent/ptrace match each other, then we should also take ptrace_reparented() case into account too. 3. Change this code to use for_each_thread() instead of deprecated while_each_thread(). [dan.carpenter@oracle.com: silence a bogus static checker warning] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10exit: reparent: use ->ptrace_entry rather than ->sibling for EXIT_DEAD tasksOleg Nesterov1-3/+3
reparent_leader() reuses ->sibling as a list node to add an EXIT_DEAD task into dead_children list we are going to release. This obviously removes the dead task from its real_parent->children list and this is even good; the parent can do nothing with the EXIT_DEAD reparented zombie, it only makes do_wait() slower. But, this also means that it can not be reparented once again, so if its new parent dies too nobody will update ->parent/real_parent, they can point to the freed memory even before release_task() we are going to call, this breaks the code which relies on pid_alive() to access ->real_parent/parent. Fortunately this is mostly theoretical, this can only happen if init or PR_SET_CHILD_SUBREAPER process ignores SIGCHLD and the new parent sub-thread exits right after we drop tasklist_lock. Change this code to use ->ptrace_entry instead, we know that the child is not traced so nobody can ever use this member. This also allows to unify this logic with exit_ptrace(), see the next changes. Note: we really need to change release_task() to nullify real_parent/ parent/group_leader pointers, but we need to change the current users first somehow. And it would be better to reap this zombie immediately but release_task_locked() we need is complicated by proc_flush_task(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com>, Cc: Sterling Alexander <stalexan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@hack.frob.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-05tty: Move session_of_pgrp() and make staticPeter Hurley1-21/+0
tiocspgrp() is the lone caller of session_of_pgrp(); relocate and limit to file scope. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-28sched, exit: Deal with nested sleepsPeter Zijlstra1-0/+5
do_wait() is a big wait loop, but we set TASK_RUNNING too late; we end up calling potential sleeps before we reset it. Not strictly a bug since we're guaranteed to exit the loop and not call schedule(); put in annotations to quiet might_sleep(). WARNING: CPU: 0 PID: 1 at ../kernel/sched/core.c:7123 __might_sleep+0x7e/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8109a788>] do_wait+0x88/0x270 Call Trace: [<ffffffff81694991>] dump_stack+0x4e/0x7a [<ffffffff8109877c>] warn_slowpath_common+0x8c/0xc0 [<ffffffff8109886c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff810bca6e>] __might_sleep+0x7e/0x90 [<ffffffff811a1c15>] might_fault+0x55/0xb0 [<ffffffff8109a3fb>] wait_consider_task+0x90b/0xc10 [<ffffffff8109a804>] do_wait+0x104/0x270 [<ffffffff8109b837>] SyS_wait4+0x77/0x100 [<ffffffff8169d692>] system_call_fastpath+0x16/0x1b Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: tglx@linutronix.de Cc: umgwanakikbuti@gmail.com Cc: ilya.dryomov@inktank.com Cc: Alex Elder <alex.elder@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Axel Lin <axel.lin@ingics.com> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: Guillaume Morin <guillaume@morinfr.org> Cc: Ionut Alexa <ionut.m.alexa@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20140924082242.186408915@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-22/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave Hansen) - Various sched/idle refinements for better idle handling (Nicolas Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot) - sched/numa updates and optimizations (Rik van Riel) - sysbench speedup (Vincent Guittot) - capacity calculation cleanups/refactoring (Vincent Guittot) - Various cleanups to thread group iteration (Oleg Nesterov) - Double-rq-lock removal optimization and various refactorings (Kirill Tkhai) - various sched/deadline fixes ... and lots of other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/dl: Use dl_bw_of() under rcu_read_lock_sched() sched/fair: Delete resched_cpu() from idle_balance() sched, time: Fix build error with 64 bit cputime_t on 32 bit systems sched: Improve sysbench performance by fixing spurious active migration sched/x86: Fix up typo in topology detection x86, sched: Add new topology for multi-NUMA-node CPUs sched/rt: Use resched_curr() in task_tick_rt() sched: Use rq->rd in sched_setaffinity() under RCU read lock sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask' sched: Use dl_bw_of() under RCU read lock sched/fair: Remove duplicate code from can_migrate_task() sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW sched: print_rq(): Don't use tasklist_lock sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock() sched: Fix the task-group check in tg_has_rt_tasks() sched/fair: Leverage the idle state info when choosing the "idlest" cpu sched: Let the scheduler see CPU idle states sched/deadline: Fix inter- exclusive cpusets migrations sched/deadline: Clear dl_entity params when setscheduling to different class sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault() ...
2014-09-08time, signal: Protect resource use statistics with seqlockRik van Riel1-0/+4
Both times() and clock_gettime(CLOCK_PROCESS_CPUTIME_ID) have scalability issues on large systems, due to both functions being serialized with a lock. The lock protects against reporting a wrong value, due to a thread in the task group exiting, its statistics reporting up to the signal struct, and that exited task's statistics being counted twice (or not at all). Protecting that with a lock results in times() and clock_gettime() being completely serialized on large systems. This can be fixed by using a seqlock around the events that gather and propagate statistics. As an additional benefit, the protection code can be moved into thread_group_cputime(), slightly simplifying the calling functions. In the case of posix_cpu_clock_get_task() things can be simplified a lot, because the calling function already ensures that the task sticks around, and the rest is now taken care of in thread_group_cputime(). This way the statistics reporting code can run lockless. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guillaume Morin <guillaume@morinfr.org> Cc: Ionut Alexa <ionut.m.alexa@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: umgwanakikbuti@gmail.com Cc: fweisbec@gmail.com Cc: srao@redhat.com Cc: lwoodman@redhat.com Cc: atheurer@redhat.com Link: http://lkml.kernel.org/r/20140816134010.26a9b572@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>