summaryrefslogtreecommitdiffstats
path: root/kernel/exit.c
AgeCommit message (Collapse)AuthorFilesLines
2012-01-27sched: Fix ancient race in do_exit()Yasunori Goto1-0/+16
try_to_wake_up() has a problem which may change status from TASK_DEAD to TASK_RUNNING in race condition with SMI or guest environment of virtual machine. As a result, exited task is scheduled() again and panic occurs. Here is the sequence how it occurs: ----------------------------------+----------------------------- | CPU A | CPU B ----------------------------------+----------------------------- TASK A calls exit().... do_exit() exit_mm() down_read(mm->mmap_sem); rwsem_down_failed_common() set TASK_UNINTERRUPTIBLE set waiter.task <= task A list_add to sem->wait_list : raw_spin_unlock_irq() (I/O interruption occured) __rwsem_do_wake(mmap_sem) list_del(&waiter->list); waiter->task = NULL wake_up_process(task A) try_to_wake_up() (task is still TASK_UNINTERRUPTIBLE) p->on_rq is still 1.) ttwu_do_wakeup() (*A) : (I/O interruption handler finished) if (!waiter.task) schedule() is not called due to waiter.task is NULL. tsk->state = TASK_RUNNING : check_preempt_curr(); : task->state = TASK_DEAD (*B) <--- set TASK_RUNNING (*C) schedule() (exit task is running again) BUG_ON() is called! -------------------------------------------------------- The execution time between (*A) and (*B) is usually very short, because the interruption is disabled, and setting TASK_RUNNING at (*C) must be executed before setting TASK_DEAD. HOWEVER, if SMI is interrupted between (*A) and (*B), (*C) is able to execute AFTER setting TASK_DEAD! Then, exited task is scheduled again, and BUG_ON() is called.... If the system works on guest system of virtual machine, the time between (*A) and (*B) may be also long due to scheduling of hypervisor, and same phenomenon can occur. By this patch, do_exit() waits for releasing task->pi_lock which is used in try_to_wake_up(). It guarantees the task becomes TASK_DEAD after waking up. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20120117174031.3118.E1E9C6FF@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-17Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit: (29 commits) audit: no leading space in audit_log_d_path prefix audit: treat s_id as an untrusted string audit: fix signedness bug in audit_log_execve_info() audit: comparison on interprocess fields audit: implement all object interfield comparisons audit: allow interfield comparison between gid and ogid audit: complex interfield comparison helper audit: allow interfield comparison in audit rules Kernel: Audit Support For The ARM Platform audit: do not call audit_getname on error audit: only allow tasks to set their loginuid if it is -1 audit: remove task argument to audit_set_loginuid audit: allow audit matching on inode gid audit: allow matching on obj_uid audit: remove audit_finish_fork as it can't be called audit: reject entry,always rules audit: inline audit_free to simplify the look of generic code audit: drop audit_set_macxattr as it doesn't do anything audit: inline checks for not needing to collect aux records audit: drop some potentially inadvisable likely notations ... Use evil merge to fix up grammar mistakes in Kconfig file. Bad speling and horrible grammar (and copious swearing) is to be expected, but let's keep it to commit messages and comments, rather than expose it to users in config help texts or printouts.
2012-01-17audit: inline audit_free to simplify the look of generic codeEric Paris1-2/+1
make the conditional a static inline instead of doing it in generic code. Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-12treewide: remove useless NORET_TYPE macro and usesJoe Perches1-3/+3
It's a very old and now unused prototype marking so just delete it. Neaten panic pointer argument style to keep checkpatch quiet. Signed-off-by: Joe Perches <joe@perches.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10Merge branch 'writeback-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux * 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: move MIN_WRITEBACK_PAGES to fs-writeback.c writeback: balanced_rate cannot exceed write bandwidth writeback: do strict bdi dirty_exceeded writeback: avoid tiny dirty poll intervals writeback: max, min and target dirty pause time writeback: dirty ratelimit - think time compensation btrfs: fix dirtied pages accounting on sub-page writes writeback: fix dirtied pages accounting on redirty writeback: fix dirtied pages accounting on sub-page writes writeback: charge leaked page dirties to active tasks writeback: Include all dirty inodes in background writeback
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-06Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-16/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) sched/tracing: Add a new tracepoint for sleeptime sched: Disable scheduler warnings during oopses sched: Fix cgroup movement of waking process sched: Fix cgroup movement of newly created process sched: Fix cgroup movement of forking process sched: Remove cfs bandwidth period check in tg_set_cfs_period() sched: Fix load-balance lock-breaking sched: Replace all_pinned with a generic flags field sched: Only queue remote wakeups when crossing cache boundaries sched: Add missing rcu_dereference() around ->real_parent usage [S390] fix cputime overflow in uptime_proc_show [S390] cputime: add sparse checking and cleanup sched: Mark parent and real_parent as __rcu sched, nohz: Fix missing RCU read lock sched, nohz: Set the NOHZ_BALANCE_KICK flag for idle load balancer sched, nohz: Fix the idle cpu check in nohz_idle_balance sched: Use jump_labels for sched_feat sched/accounting: Fix parameter passing in task_group_account_field sched/accounting: Fix user/system tick double accounting sched/accounting: Re-use scheduler statistics for the root cgroup ... Fix up conflicts in - arch/ia64/include/asm/cputime.h, include/asm-generic/cputime.h usecs_to_cputime64() vs the sparse cleanups - kernel/sched/fair.c, kernel/time/tick-sched.c scheduler changes in multiple branches
2012-01-04ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE raceOleg Nesterov1-1/+8
Test-case: int main(void) { int pid, status; pid = fork(); if (!pid) { for (;;) { if (!fork()) return 0; if (waitpid(-1, &status, 0) < 0) { printf("ERR!! wait: %m\n"); return 0; } } } assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0); assert(waitpid(-1, NULL, 0) == pid); assert(ptrace(PTRACE_SETOPTIONS, pid, 0, PTRACE_O_TRACEFORK) == 0); do { ptrace(PTRACE_CONT, pid, 0, 0); pid = waitpid(-1, NULL, 0); } while (pid > 0); return 1; } It fails because ->real_parent sees its child in EXIT_DEAD state while the tracer is going to change the state back to EXIT_ZOMBIE in wait_task_zombie(). The offending commit is 823b018e which moved the EXIT_DEAD check, but in fact we should not blame it. The original code was not correct as well because it didn't take ptrace_reparented() into account and because we can't really trust ->ptrace. This patch adds the additional check to close this particular race but it doesn't solve the whole problem. We simply can't rely on ->ptrace in this case, it can be cleared if the tracer is multithreaded by the exiting ->parent. I think we should kill EXIT_DEAD altogether, we should always remove the soon-to-be-reaped child from ->children or at least we should never do the DEAD->ZOMBIE transition. But this is too complex for 3.2. Reported-and-tested-by: Denys Vlasenko <vda.linux@googlemail.com> Tested-by: Lukasz Michalik <lmi@ift.uni.wroc.pl> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@kernel.org> [3.0+] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-18writeback: charge leaked page dirties to active tasksWu Fengguang1-0/+3
It's a years long problem that a large number of short-lived dirtiers (eg. gcc instances in a fast kernel build) may starve long-run dirtiers (eg. dd) as well as pushing the dirty pages to the global hard limit. The solution is to charge the pages dirtied by the exited gcc to the other random dirtying tasks. It sounds not perfect, however should behave good enough in practice, seeing as that throttled tasks aren't actually running so those that are running are more likely to pick it up and get throttled, therefore promoting an equal spread. Randy: fix compile error: 'dirty_throttle_leaks' undeclared in exit.c Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-12-15[S390] cputime: add sparse checking and cleanupMartin Schwidefsky1-16/+6
Make cputime_t and cputime64_t nocast to enable sparse checking to detect incorrect use of cputime. Drop the cputime macros for simple scalar operations. The conversion macros are still needed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-11-21freezer: remove racy clear_freeze_flag() and set PF_NOFREEZE on dead tasksTejun Heo1-2/+1
clear_freeze_flag() in exit_mm() is racy. Freezing can start afterwards. Remove it. Skipping freezer for exiting task will be properly implemented later. Also, freezable() was testing exit_state directly to make system freezer ignore dead tasks. Let the exiting task set PF_NOFREEZE after entering TASK_DEAD instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-10-31oom: remove oom_disable_countDavid Rientjes1-2/+0
This removes mm->oom_disable_count entirely since it's unnecessary and currently buggy. The counter was intended to be per-process but it's currently decremented in the exit path for each thread that exits, causing it to underflow. The count was originally intended to prevent oom killing threads that share memory with threads that cannot be killed since it doesn't lead to future memory freeing. The counter could be fixed to represent all threads sharing the same mm, but it's better to remove the count since: - it is possible that the OOM_DISABLE thread sharing memory with the victim is waiting on that thread to exit and will actually cause future memory freeing, and - there is no guarantee that a thread is disabled from oom killing just because another thread sharing its mm is oom disabled. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Ying Han <yinghan@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26ipc: introduce shm_rmid_forced sysctlVasiliy Kulikov1-0/+1
Add support for the shm_rmid_forced sysctl. If set to 1, all shared memory objects in current ipc namespace will be automatically forced to use IPC_RMID. The POSIX way of handling shmem allows one to create shm objects and call shmdt(), leaving shm object associated with no process, thus consuming memory not counted via rlimits. With shm_rmid_forced=1 the shared memory object is counted at least for one process, so OOM killer may effectively kill the fat process holding the shared memory. It obviously breaks POSIX - some programs relying on the feature would stop working. So set shm_rmid_forced=1 only if you're sure nobody uses "orphaned" memory. Use shm_rmid_forced=0 by default for compatability reasons. The feature was previously impemented in -ow as a configure option. [akpm@linux-foundation.org: fix documentation, per Randy] [akpm@linux-foundation.org: fix warning] [akpm@linux-foundation.org: readability/conventionality tweaks] [akpm@linux-foundation.org: fix shm_rmid_forced/shm_forced_rmid confusion, use standard comment layout] Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Serge E. Hallyn" <serge.hallyn@canonical.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Solar Designer <solar@openwall.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-25Merge branch 'for-3.1/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
* 'for-3.1/core' of git://git.kernel.dk/linux-block: (24 commits) block: strict rq_affinity backing-dev: use synchronize_rcu_expedited instead of synchronize_rcu block: fix patch import error in max_discard_sectors check block: reorder request_queue to remove 64 bit alignment padding CFQ: add think time check for group CFQ: add think time check for service tree CFQ: move think time check variables to a separate struct fixlet: Remove fs_excl from struct task. cfq: Remove special treatment for metadata rqs. block: document blk_plug list access block: avoid building too big plug list compat_ioctl: fix make headers_check regression block: eliminate potential for infinite loop in blkdev_issue_discard compat_ioctl: fix warning caused by qemu block: flush MEDIA_CHANGE from drivers on close(2) blk-throttle: Make total_nr_queued unsigned block: Add __attribute__((format(printf...) and fix fallout fs/partitions/check.c: make local symbols static block:remove some spare spaces in genhd.c block:fix the comment error in blkdev.h ...
2011-07-22Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/miscLinus Torvalds1-51/+40
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (39 commits) ptrace: do_wait(traced_leader_killed_by_mt_exec) can block forever ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction connector: add an event for monitoring process tracers ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task() ptrace_init_task: initialize child->jobctl explicitly has_stopped_jobs: s/task_is_stopped/SIGNAL_STOP_STOPPED/ ptrace: make former thread ID available via PTRACE_GETEVENTMSG after PTRACE_EVENT_EXEC stop ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/ ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented() ptrace: ptrace_reparented() should check same_thread_group() redefine thread_group_leader() as exit_signal >= 0 do not change dead_task->exit_signal kill task_detached() reparent_leader: check EXIT_DEAD instead of task_detached() make do_notify_parent() __must_check, update the callers __ptrace_detach: avoid task_detached(), check do_notify_parent() kill tracehook_notify_death() make do_notify_parent() return bool ptrace: s/tracehook_tracer_task()/ptrace_parent()/ ...
2011-07-17has_stopped_jobs: s/task_is_stopped/SIGNAL_STOP_STOPPED/Oleg Nesterov1-7/+5
has_stopped_jobs() naively checks task_is_stopped(group_leader). This was always wrong even without ptrace, group_leader can be dead. And given that ptrace can change the state to TRACED this is wrong even in the single-threaded case. Change the code to check SIGNAL_STOP_STOPPED and simplify the code, retval + break/continue doesn't make this trivial code more readable. We could probably add the usual "|| signal->group_stop_count" check but I don't think this makes sense, the task can start the group-stop right after the check anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-07-12fixlet: Remove fs_excl from struct task.Justin TerAvest1-1/+0
fs_excl is a poor man's priority inheritance for filesystems to hint to the block layer that an operation is important. It was never clearly specified, not widely adopted, and will not prevent starvation in many cases (like across cgroups). fs_excl was introduced with the time sliced CFQ IO scheduler, to indicate when a process held FS exclusive resources and thus needed a boost. It doesn't cover all file systems, and it was never fully complete. Lets kill it. Signed-off-by: Justin TerAvest <teravest@google.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-11Merge branch 'master' into for-nextJiri Kosina1-16/+15
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-08rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_checkMichal Hocko1-1/+0
Since ca5ecddf (rcu: define __rcu address space modifier for sparse) rcu_dereference_check use rcu_read_lock_held as a part of condition automatically so callers do not have to do that as well. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-27ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/Oleg Nesterov1-2/+1
wait_consider_task() checks same_thread_group(parent, real_parent), this is the open-coded ptrace_reparented(). __ptrace_detach() remains the only function which has to check this by hand, although we could reorganize the code to delay __ptrace_unlink. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27kill task_detached()Oleg Nesterov1-3/+2
Upadate the last user of task_detached(), wait_task_zombie(), to use thread_group_leader() and kill task_detached(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27reparent_leader: check EXIT_DEAD instead of task_detached()Oleg Nesterov1-1/+1
Change reparent_leader() to check ->exit_state instead of ->exit_signal, this matches the similar EXIT_DEAD check in wait_consider_task() and allows us to cleanup the do_notify_parent/task_detached logic. task_detached() was really needed during reparenting before 9cd80bbb "do_wait() optimization: do not place sub-threads on ->children list" to filter out the sub-threads. After this change task_detached(p) can only be true if p is the dead group_leader and its parent ignores SIGCHLD, in this case the caller of do_notify_parent() is going to reap this task and it should set EXIT_DEAD. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27make do_notify_parent() __must_check, update the callersOleg Nesterov1-21/+8
Change other callers of do_notify_parent() to check the value it returns, this makes the subsequent task_detached() unnecessary. Mark do_notify_parent() as __must_check. Use thread_group_leader() instead of !task_detached() to check if we need to notify the real parent in wait_task_zombie(). Remove the stale comment in release_task(). "just for sanity" is no longer true, we have to set EXIT_DEAD to avoid the races with do_wait(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27kill tracehook_notify_death()Oleg Nesterov1-8/+13
Kill tracehook_notify_death(), reimplement the logic in its caller, exit_notify(). Also, change the exec_id's check to use thread_group_leader() instead of task_detached(), this is more clear. This logic only applies to the exiting leader, a sub-thread must never change its exit_signal. Note: when the traced group leader exits the exit_signal-or-SIGCHLD logic looks really strange: - we notify the tracer even if !thread_group_empty() but do_wait(WEXITED) can't work until all threads exit - if the tracer is real_parent, it is not clear why can't we use ->exit_signal event if !thread_group_empty() -v2: do not try to fix the 2nd oddity to avoid the subtle behavior change mixed with reorganization, suggested by Tejun. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27make do_notify_parent() return boolOleg Nesterov1-3/+6
- change do_notify_parent() to return a boolean, true if the task should be reaped because its parent ignores SIGCHLD. - update the only caller which checks the returned value, exit_notify(). This temporary uglifies exit_notify() even more, will be cleanuped by the next change. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
2011-06-22ptrace: kill trivial tracehooksTejun Heo1-5/+2
At this point, tracehooks aren't useful to mainline kernel and mostly just add an extra layer of obfuscation. Although they have comments, without actual in-kernel users, it is difficult to tell what are their assumptions and they're actually trying to achieve. To mainline kernel, they just aren't worth keeping around. This patch kills the following trivial tracehooks. * Ones testing whether task is ptraced. Replace with ->ptrace test. tracehook_expect_breakpoints() tracehook_consider_ignored_signal() tracehook_consider_fatal_signal() * ptrace_event() wrappers. Call directly. tracehook_report_exec() tracehook_report_exit() tracehook_report_vfork_done() * ptrace_release_task() wrapper. Call directly. tracehook_finish_release_task() * noop tracehook_prepare_release_task() tracehook_report_death() This doesn't introduce any behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22ptrace: kill task_ptrace()Tejun Heo1-4/+4
task_ptrace(task) simply dereferences task->ptrace and isn't even used consistently only adding confusion. Kill it and directly access ->ptrace instead. This doesn't introduce any behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-16ptrace: implement PTRACE_LISTENTejun Heo1-1/+2
The previous patch implemented async notification for ptrace but it only worked while trace is running. This patch introduces PTRACE_LISTEN which is suggested by Oleg Nestrov. It's allowed iff tracee is in STOP trap and puts tracee into quasi-running state - tracee never really runs but wait(2) and ptrace(2) consider it to be running. While ptracer is listening, tracee is allowed to re-enter STOP to notify an async event. Listening state is cleared on the first notification. Ptracer can also clear it by issuing INTERRUPT - tracee will re-trap into STOP with listening state cleared. This allows ptracer to monitor group stop state without running tracee - use INTERRUPT to put tracee into STOP trap, issue LISTEN and then wait(2) to wait for the next group stop event. When it happens, PTRACE_GETSIGINFO provides information to determine the current state. Test program follows. #define PTRACE_SEIZE 0x4206 #define PTRACE_INTERRUPT 0x4207 #define PTRACE_LISTEN 0x4208 #define PTRACE_SEIZE_DEVEL 0x80000000 static const struct timespec ts1s = { .tv_sec = 1 }; int main(int argc, char **argv) { pid_t tracee, tracer; int i; tracee = fork(); if (!tracee) while (1) pause(); tracer = fork(); if (!tracer) { siginfo_t si; ptrace(PTRACE_SEIZE, tracee, NULL, (void *)(unsigned long)PTRACE_SEIZE_DEVEL); ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL); repeat: waitid(P_PID, tracee, NULL, WSTOPPED); ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si); if (!si.si_code) { printf("tracer: SIG %d\n", si.si_signo); ptrace(PTRACE_CONT, tracee, NULL, (void *)(unsigned long)si.si_signo); goto repeat; } printf("tracer: stopped=%d signo=%d\n", si.si_signo != SIGTRAP, si.si_signo); if (si.si_signo != SIGTRAP) ptrace(PTRACE_LISTEN, tracee, NULL, NULL); else ptrace(PTRACE_CONT, tracee, NULL, NULL); goto repeat; } for (i = 0; i < 3; i++) { nanosleep(&ts1s, NULL); printf("mother: SIGSTOP\n"); kill(tracee, SIGSTOP); nanosleep(&ts1s, NULL); printf("mother: SIGCONT\n"); kill(tracee, SIGCONT); } nanosleep(&ts1s, NULL); kill(tracer, SIGKILL); kill(tracee, SIGKILL); return 0; } This is identical to the program to test TRAP_NOTIFY except that tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped. This allows ptracer to monitor when group stop ends without running tracee. # ./test-listen tracer: stopped=0 signo=5 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 mother: SIGSTOP tracer: SIG 19 tracer: stopped=1 signo=19 mother: SIGCONT tracer: stopped=0 signo=5 tracer: SIG 18 -v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into task_stopped_code() as suggested by Oleg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-15memcg: clear mm->owner when last possible owner leavesKAMEZAWA Hiroyuki1-16/+15
The following crash was reported: > Call Trace: > [<ffffffff81139792>] mem_cgroup_from_task+0x15/0x17 > [<ffffffff8113a75a>] __mem_cgroup_try_charge+0x148/0x4b4 > [<ffffffff810493f3>] ? need_resched+0x23/0x2d > [<ffffffff814cbf43>] ? preempt_schedule+0x46/0x4f > [<ffffffff8113afe8>] mem_cgroup_charge_common+0x9a/0xce > [<ffffffff8113b6d1>] mem_cgroup_newpage_charge+0x5d/0x5f > [<ffffffff81134024>] khugepaged+0x5da/0xfaf > [<ffffffff81078ea0>] ? __init_waitqueue_head+0x4b/0x4b > [<ffffffff81133a4a>] ? add_mm_counter.constprop.5+0x13/0x13 > [<ffffffff81078625>] kthread+0xa8/0xb0 > [<ffffffff814d13e8>] ? sub_preempt_count+0xa1/0xb4 > [<ffffffff814d5664>] kernel_thread_helper+0x4/0x10 > [<ffffffff814ce858>] ? retint_restore_args+0x13/0x13 > [<ffffffff8107857d>] ? __init_kthread_worker+0x5a/0x5a What happens is that khugepaged tries to charge a huge page against an mm whose last possible owner has already exited, and the memory controller crashes when the stale mm->owner is used to look up the cgroup to charge. mm->owner has never been set to NULL with the last owner going away, but nobody cared until khugepaged came along. Even then it wasn't a problem because the final mmput() on an mm was forced to acquire and release mmap_sem in write-mode, preventing an exiting owner to go away while the mmap_sem was held, and until "692e0b3 mm: thp: optimize memcg charge in khugepaged", the memory cgroup charge was protected by mmap_sem in read-mode. Instead of going back to relying on the mmap_sem to enforce lifetime of a task, this patch ensures that mm->owner is properly set to NULL when the last possible owner is exiting, which the memory controller can handle just fine. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: Dave Jones <davej@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-20Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/miscLinus Torvalds1-22/+88
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (41 commits) signal: trivial, fix the "timespec declared inside parameter list" warning job control: reorganize wait_task_stopped() ptrace: fix signal->wait_chldexit usage in task_clear_group_stop_trapping() signal: sys_sigprocmask() needs retarget_shared_pending() signal: cleanup sys_sigprocmask() signal: rename signandsets() to sigandnsets() signal: do_sigtimedwait() needs retarget_shared_pending() signal: introduce do_sigtimedwait() to factor out compat/native code signal: sys_rt_sigtimedwait: simplify the timeout logic signal: cleanup sys_rt_sigprocmask() x86: signal: sys_rt_sigreturn() should use set_current_blocked() x86: signal: handle_signal() should use set_current_blocked() signal: sigprocmask() should do retarget_shared_pending() signal: sigprocmask: narrow the scope of ->siglock signal: retarget_shared_pending: optimize while_each_thread() loop signal: retarget_shared_pending: consider shared/unblocked signals only signal: introduce retarget_shared_pending() ptrace: ptrace_check_attach() should not do s/STOPPED/TRACED/ signal: Turn SIGNAL_STOP_DEQUEUED into GROUP_STOP_DEQUEUED signal: do_signal_stop: Remove the unneeded task_clear_group_stop_pending() ...
2011-05-13job control: reorganize wait_task_stopped()Tejun Heo1-7/+23
wait_task_stopped() tested task_stopped_code() without acquiring siglock and, if stop condition existed, called wait_task_stopped() and directly returned the result. This patch moves the initial task_stopped_code() testing into wait_task_stopped() and make wait_consider_task() fall through to wait_task_continue() on 0 return. This is for the following two reasons. * Because the initial task_stopped_code() test is done without acquiring siglock, it may race against SIGCONT generation. The stopped condition might have been replaced by continued state by the time wait_task_stopped() acquired siglock. This may lead to unexpected failure of WNOHANG waits. This reorganization addresses this single race case but there are other cases - TASK_RUNNING -> TASK_STOPPED transition and EXIT_* transitions. * Scheduled ptrace updates require changes to the initial test which would fit better inside wait_task_stopped(). Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-04-25ptrace: Prepare to fix racy accesses on task breakpointsFrederic Weisbecker1-1/+1
When a task is traced and is in a stopped state, the tracer may execute a ptrace request to examine the tracee state and get its task struct. Right after, the tracee can be killed and thus its breakpoints released. This can happen concurrently when the tracer is in the middle of reading or modifying these breakpoints, leading to dereferencing a freed pointer. Hence, to prepare the fix, create a generic breakpoint reference holding API. When a reference on the breakpoints of a task is held, the breakpoints won't be released until the last reference is dropped. After that, no more ptrace request on the task's breakpoints can be serviced for the tracer. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: v2.6.33.. <stable@kernel.org> Link: http://lkml.kernel.org/r/1302284067-7860-2-git-send-email-fweisbec@gmail.com
2011-04-07Merge branch 'ptrace' of ↵Oleg Nesterov1-17/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into ptrace
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-23job control: Allow access to job control events through ptraceesTejun Heo1-8/+33
Currently a real parent can't access job control stopped/continued events through a ptraced child. This utterly breaks job control when the children are ptraced. For example, if a program is run from an interactive shell and then strace(1) attaches to it, pressing ^Z would send SIGTSTP and strace(1) would notice it but the shell has no way to tell whether the child entered job control stop and thus can't tell when to take over the terminal - leading to awkward lone ^Z on the terminal. Because the job control and ptrace stopped states are independent, there is no reason to prevent real parents from accessing the stopped state regardless of ptrace. The continued state isn't separate but ptracers don't have any use for them as ptracees can never resume without explicit command from their ptracers, so as long as ptracers don't consume it, it should be fine. Although this is a behavior change, because the previous behavior is utterly broken when viewed from real parents and the change is only visible to real parents, I don't think it's necessary to make this behavior optional. One situation to be careful about is when a task from the real parent's group is ptracing. The parent group is the recipient of both ptrace and job control stop events and one stop can be reported as both job control and ptrace stops. As this can break the current ptrace users, suppress job control stopped events for these cases. If a real parent ptracer wants to know about both job control and ptrace stops, it can create a separate process to serve the role of real parent. Note that this only updates wait(2) side of things. The real parent can access the states via wait(2) but still is not properly notified (woken up and delivered signal). Test case polls wait(2) with WNOHANG to work around. Notification will be updated by future patches. Test case follows. #include <stdio.h> #include <unistd.h> #include <time.h> #include <errno.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> int main(void) { const struct timespec ts100ms = { .tv_nsec = 100000000 }; pid_t tracee, tracer; siginfo_t si; int i; tracee = fork(); if (tracee == 0) { while (1) { printf("tracee: SIGSTOP\n"); raise(SIGSTOP); nanosleep(&ts100ms, NULL); printf("tracee: SIGCONT\n"); raise(SIGCONT); nanosleep(&ts100ms, NULL); } } waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT); tracer = fork(); if (tracer == 0) { nanosleep(&ts100ms, NULL); ptrace(PTRACE_ATTACH, tracee, NULL, NULL); for (i = 0; i < 11; i++) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED); if (si.si_pid && si.si_code == CLD_TRAPPED) ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } printf("tracer: EXITING\n"); return 0; } while (1) { si.si_pid = 0; waitid(P_PID, tracee, &si, WSTOPPED | WCONTINUED | WEXITED | WNOHANG); if (si.si_pid) printf("mommy : WAIT status=%02d code=%02d\n", si.si_status, si.si_code); nanosleep(&ts100ms, NULL); } return 0; } Before the patch, while ptraced, the parent can't see any job control events. tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracee: SIGCONT tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C After the patch, tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP mommy : WAIT status=19 code=05 tracee: SIGCONT mommy : WAIT status=18 code=06 tracee: SIGSTOP tracer: EXITING mommy : WAIT status=19 code=05 ^C -v2: Oleg pointed out that wait(2) should be suppressed for the real parent's group instead of only the real parent task itself. Updated accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23job control: Fix ptracer wait(2) hang and explain notask_error clearingTejun Heo1-10/+34
wait(2) and friends allow access to stopped/continued states through zombies, which is required as the states are process-wide and should be accessible whether the leader task is alive or undead. wait_consider_task() implements this by always clearing notask_error and going through wait_task_stopped/continued() for unreaped zombies. However, while ptraced, the stopped state is per-task and as such if the ptracee became a zombie, there's no further stopped event to listen to and wait(2) and friends should return -ECHILD on the tracee. Fix it by clearing notask_error only if WCONTINUED | WEXITED is set for ptraced zombies. While at it, document why clearing notask_error is safe for each case. Test case follows. #include <stdio.h> #include <unistd.h> #include <pthread.h> #include <time.h> #include <sys/types.h> #include <sys/ptrace.h> #include <sys/wait.h> static void *nooper(void *arg) { pause(); return NULL; } int main(void) { const struct timespec ts1s = { .tv_sec = 1 }; pid_t tracee, tracer; siginfo_t si; tracee = fork(); if (tracee == 0) { pthread_t thr; pthread_create(&thr, NULL, nooper, NULL); nanosleep(&ts1s, NULL); printf("tracee exiting\n"); pthread_exit(NULL); /* let subthread run */ } tracer = fork(); if (tracer == 0) { ptrace(PTRACE_ATTACH, tracee, NULL, NULL); while (1) { if (waitid(P_PID, tracee, &si, WSTOPPED) < 0) { perror("waitid"); break; } ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status); } return 0; } waitid(P_PID, tracer, &si, WEXITED); kill(tracee, SIGKILL); return 0; } Before the patch, after the tracee becomes a zombie, the tracer's waitid(WSTOPPED) never returns and the program doesn't terminate. tracee exiting ^C After the patch, tracee exiting triggers waitid() to fail. tracee exiting waitid: No child processes -v2: Oleg pointed out that exited in addition to continued can happen for ptraced dead group leader. Clear notask_error for ptraced child on WEXITED too. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-23job control: Small reorganization of wait_consider_task()Tejun Heo1-3/+4
Move EXIT_DEAD test in wait_consider_task() above ptrace check. As ptraced tasks can't be EXIT_DEAD, this change doesn't cause any behavior change. This is to prepare for further changes. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com>
2011-03-10block: initial patch for on-stack per-task pluggingJens Axboe1-0/+1
This patch adds support for creating a queuing context outside of the queue itself. This enables us to batch up pieces of IO before grabbing the block device queue lock and submitting them to the IO scheduler. The context is created on the stack of the process and assigned in the task structure, so that we can auto-unplug it if we hit a schedule event. The current queue plugging happens implicitly if IO is submitted to an empty device, yet callers have to remember to unplug that IO when they are going to wait for it. This is an ugly API and has caused bugs in the past. Additionally, it requires hacks in the vm (->sync_page() callback) to handle that logic. By switching to an explicit plugging scheme we make the API a lot nicer and can get rid of the ->sync_page() hack in the vm. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-11Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds1-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits) perf session: Fix infinite loop in __perf_session__process_events perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail perf tools: Emit clearer message for sys_perf_event_open ENOENT return perf stat: better error message for unsupported events perf sched: Fix allocation result check perf, x86: P4 PMU - Fix unflagged overflows handling dynamic debug: Fix build issue with older gcc tracing: Fix TRACE_EVENT power tracepoint creation tracing: Fix preempt count leak tracepoint: Add __rcu annotation tracing: remove duplicate null-pointer check in skb tracepoint tracing/trivial: Add missing comma in TRACE_EVENT comment tracing: Include module.h in define_trace.h x86: Save rbp in pt_regs on irq entry x86, dumpstack: Fix unused variable warning x86, NMI: Clean-up default_do_nmi() x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU x86, NMI: Remove DIE_NMI_IPI x86, NMI: Add priorities to handlers ...
2011-01-07perf_events: Move code around to prepare for cgroupStephane Eranian1-5/+9
In particular this patch move perf_event_exit_task() before cgroup_exit() to allow for cgroup support. The cgroup_exit() function detaches the cgroups attached to a task. Other movements include hoisting some definitions and inlines at the top of perf_event.c Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-17core: Replace __get_cpu_var with __this_cpu_read if not used for an address.Christoph Lameter1-1/+1
__get_cpu_var() can be replaced with this_cpu_read and will then use a single read instruction with implied address calculation to access the correct per cpu instance. However, the address of a per cpu variable passed to __this_cpu_read() cannot be determined (since it's an implied address conversion through segment prefixes). Therefore apply this only to uses of __get_cpu_var where the address of the variable is not used. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Hugh Dickins <hughd@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-02do_exit(): make sure that we run with get_fs() == USER_DSNelson Elhage1-0/+9
If a user manages to trigger an oops with fs set to KERNEL_DS, fs is not otherwise reset before do_exit(). do_exit may later (via mm_release in fork.c) do a put_user to a user-controlled address, potentially allowing a user to leverage an oops into a controlled write into kernel memory. This is only triggerable in the presence of another bug, but this potentially turns a lot of DoS bugs into privilege escalations, so it's worth fixing. I have proof-of-concept code which uses this bug along with CVE-2010-3849 to write a zero to an arbitrary kernel address, so I've tested that this is not theoretical. A more logical place to put this fix might be when we know an oops has occurred, before we call do_exit(), but that would involve changing every architecture, in multiple places. Let's just stick it in do_exit instead. [akpm@linux-foundation.org: update code comment] Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05posix-cpu-timers: workaround to suppress the problems with mt execOleg Nesterov1-0/+8
posix-cpu-timers.c correctly assumes that the dying process does posix_cpu_timers_exit_group() and removes all !CPUCLOCK_PERTHREAD timers from signal->cpu_timers list. But, it also assumes that timer->it.cpu.task is always the group leader, and thus the dead ->task means the dead thread group. This is obviously not true after de_thread() changes the leader. After that almost every posix_cpu_timer_ method has problems. It is not simple to fix this bug correctly. First of all, I think that timer->it.cpu should use struct pid instead of task_struct. Also, the locking should be reworked completely. In particular, tasklist_lock should not be used at all. This all needs a lot of nontrivial and hard-to-test changes. Change __exit_signal() to do posix_cpu_timers_exit_group() when the old leader dies during exec. This is not the fix, just the temporary hack to hide the problem for 2.6.37 and stable. IOW, this is obviously wrong but this is what we currently have anyway: cpu timers do not work after mt exec. In theory this change adds another race. The exiting leader can detach the timers which were attached to the new leader. However, the window between de_thread() and release_task() is small, we can pretend that sys_timer_create() was called before de_thread(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27exit: add lock context annotation on find_new_reaper()Namhyung Kim1-0/+2
find_new_reaper() releases and regrabs tasklist_lock but was missing proper annotations. Add it. This remove following sparse warning: warning: context imbalance in 'find_new_reaper' - unexpected unlock Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26oom: add per-mm oom disable countYing Han1-0/+3
It's pointless to kill a task if another thread sharing its mm cannot be killed to allow future memory freeing. A subsequent patch will prevent kills in such cases, but first it's necessary to have a way to flag a task that shares memory with an OOM_DISABLE task that doesn't incur an additional tasklist scan, which would make select_bad_process() an O(n^2) function. This patch adds an atomic counter to struct mm_struct that follows how many threads attached to it have an oom_score_adj of OOM_SCORE_ADJ_MIN. They cannot be killed by the kernel, so their memory cannot be freed in oom conditions. This only requires task_lock() on the task that we're operating on, it does not require mm->mmap_sem since task_lock() pins the mm and the operation is atomic. [rientjes@google.com: changelog and sys_unshare() code] [rientjes@google.com: protect oom_disable_count with task_lock in fork] [rientjes@google.com: use old_mm for oom_disable_count in exec] Signed-off-by: Ying Han <yinghan@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09perf: Fix up delayed_put_task_struct()Peter Zijlstra1-3/+1
I missed a perf_event_ctxp user when converting it to an array. Pull this last user into perf_event.c as well and fix it up. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-17Fix unprotected access to task credentials in waitid()Daniel J Blueman1-3/+2
Using a program like the following: #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/wait.h> int main() { id_t id; siginfo_t infop; pid_t res; id = fork(); if (id == 0) { sleep(1); exit(0); } kill(id, SIGSTOP); alarm(1); waitid(P_PID, id, &infop, WCONTINUED); return 0; } to call waitid() on a stopped process results in access to the child task's credentials without the RCU read lock being held - which may be replaced in the meantime - eliciting the following warning: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/exit.c:1460 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 2 locks held by waitid02/22252: #0: (tasklist_lock){.?.?..}, at: [<ffffffff81061ce5>] do_wait+0xc5/0x310 #1: (&(&sighand->siglock)->rlock){-.-...}, at: [<ffffffff810611da>] wait_consider_task+0x19a/0xbe0 stack backtrace: Pid: 22252, comm: waitid02 Not tainted 2.6.35-323cd+ #3 Call Trace: [<ffffffff81095da4>] lockdep_rcu_dereference+0xa4/0xc0 [<ffffffff81061b31>] wait_consider_task+0xaf1/0xbe0 [<ffffffff81061d15>] do_wait+0xf5/0x310 [<ffffffff810620b6>] sys_waitid+0x86/0x1f0 [<ffffffff8105fce0>] ? child_wait_callback+0x0/0x70 [<ffffffff81003282>] system_call_fastpath+0x16/0x1b This is fixed by holding the RCU read lock in wait_task_continued() to ensure that the task's current credentials aren't destroyed between us reading the cred pointer and us reading the UID from those credentials. Furthermore, protect wait_task_stopped() in the same way. We don't need to keep holding the RCU read lock once we've read the UID from the credentials as holding the RCU read lock doesn't stop the target task from changing its creds under us - so the credentials may be outdated immediately after we've read the pointer, lock or no lock. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11ptrace: optimize exit_ptrace() for the likely caseOleg Nesterov1-2/+5
exit_ptrace() takes tasklist_lock unconditionally. We need this lock to avoid the race with ptrace_traceme(), it acts as a barrier. Change its caller, forget_original_parent(), to call exit_ptrace() under tasklist_lock. Change exit_ptrace() to drop and reacquire this lock if needed. This allows us to add the fastpath list_empty(ptraced) check. In the likely no-tracees case exit_ptrace() just returns and we avoid the lock() + unlock() sequence. "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> suggested to add this check, and he reports that this change adds about 11% improvement in some tests. Suggested-and-tested-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27proc: turn signal_struct->count into "int nr_threads"Oleg Nesterov1-4/+1
No functional changes, just s/atomic_t count/int nr_threads/. With the recent changes this counter has a single user, get_nr_threads() And, none of its callers need the really accurate number of threads, not to mention each caller obviously races with fork/exit. It is only used to report this value to the user-space, except first_tid() uses it to avoid the unnecessary while_each_thread() loop in the unlikely case. It is a bit sad we need a word in struct signal_struct for this, perhaps we can change get_nr_threads() to approximate the number of threads using signal->live and kill ->nr_threads later. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>