| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In order to keep ahead of cases in the kernel where Control Flow
Integrity (CFI) may trip over function call casts, enabling
-Wcast-function-type is helpful. To that end, BPF_CAST_CALL causes
various warnings and is one of the last places in the kernel
triggering this warning.
For actual function calls, replace BPF_CAST_CALL() with a typedef, which
captures the same details about the given function pointers.
This change results in no object code difference.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://github.com/KSPP/linux/issues/20
Link: https://lore.kernel.org/lkml/CAEf4Bzb46=-J5Fxc3mMZ8JQPtK1uoE0q6+g6WPz53Cvx=CBEhw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210928230946.4062144-3-keescook@chromium.org
|
|
In order to keep ahead of cases in the kernel where Control Flow
Integrity (CFI) may trip over function call casts, enabling
-Wcast-function-type is helpful. To that end, BPF_CAST_CALL causes
various warnings and is one of the last places in the kernel triggering
this warning.
Most places using BPF_CAST_CALL actually just want a void * to perform
math on. It's not actually performing a call, so just use a different
helper to get the void *, by way of the new BPF_CALL_IMM() helper, which
can clean up a common copy/paste idiom as well.
This change results in no object code difference.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://github.com/KSPP/linux/issues/20
Link: https://lore.kernel.org/lkml/CAEf4Bzb46=-J5Fxc3mMZ8JQPtK1uoE0q6+g6WPz53Cvx=CBEhw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210928230946.4062144-2-keescook@chromium.org
|
|
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp")
9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins")
099fdeda659d ("bnxt_en: Event handler for PPS events")
kernel/bpf/helpers.c
include/linux/bpf-cgroup.h
a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()")
c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current")
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray")
2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer")
MAINTAINERS
7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo")
7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In __htab_map_lookup_and_delete_batch(), hash buckets are iterated
over to count the number of elements in each bucket (bucket_size).
If bucket_size is large enough, the multiplication to calculate
kvmalloc() size could overflow, resulting in out-of-bounds write
as reported by KASAN:
[...]
[ 104.986052] BUG: KASAN: vmalloc-out-of-bounds in __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.986489] Write of size 4194224 at addr ffffc9010503be70 by task crash/112
[ 104.986889]
[ 104.987193] CPU: 0 PID: 112 Comm: crash Not tainted 5.14.0-rc4 #13
[ 104.987552] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 104.988104] Call Trace:
[ 104.988410] dump_stack_lvl+0x34/0x44
[ 104.988706] print_address_description.constprop.0+0x21/0x140
[ 104.988991] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989327] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989622] kasan_report.cold+0x7f/0x11b
[ 104.989881] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990239] kasan_check_range+0x17c/0x1e0
[ 104.990467] memcpy+0x39/0x60
[ 104.990670] __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990982] ? __wake_up_common+0x4d/0x230
[ 104.991256] ? htab_of_map_free+0x130/0x130
[ 104.991541] bpf_map_do_batch+0x1fb/0x220
[...]
In hashtable, if the elements' keys have the same jhash() value, the
elements will be put into the same bucket. By putting a lot of elements
into a single bucket, the value of bucket_size can be increased to
trigger the integer overflow.
Triggering the overflow is possible for both callers with CAP_SYS_ADMIN
and callers without CAP_SYS_ADMIN.
It will be trivial for a caller with CAP_SYS_ADMIN to intentionally
reach this overflow by enabling BPF_F_ZERO_SEED. As this flag will set
the random seed passed to jhash() to 0, it will be easy for the caller
to prepare keys which will be hashed into the same value, and thus put
all the elements into the same bucket.
If the caller does not have CAP_SYS_ADMIN, BPF_F_ZERO_SEED cannot be
used. However, it will be still technically possible to trigger the
overflow, by guessing the random seed value passed to jhash() (32bit)
and repeating the attempt to trigger the overflow. In this case,
the probability to trigger the overflow will be low and will take
a very long time.
Fix the integer overflow by calling kvmalloc_array() instead of
kvmalloc() to allocate memory.
Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map")
Signed-off-by: Tatsuhiko Yasumatsu <th.yasumatsu@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210806150419.109658-1-th.yasumatsu@gmail.com
|
|
Restrict bpf timers to array, hash (both preallocated and kmalloced), and
lru map types. The per-cpu maps with timers don't make sense, since 'struct
bpf_timer' is a part of map value. bpf timers in per-cpu maps would mean that
the number of timers depends on number of possible cpus and timers would not be
accessible from all cpus. lpm map support can be added in the future.
The timers in inner maps are supported.
The bpf_map_update/delete_elem() helpers and sys_bpf commands cancel and free
bpf_timer in a given map element.
Similar to 'struct bpf_spin_lock' BTF is required and it is used to validate
that map element indeed contains 'struct bpf_timer'.
Make check_and_init_map_value() init both bpf_spin_lock and bpf_timer when
map element data is reused in preallocated htab and lru maps.
Teach copy_map_value() to support both bpf_spin_lock and bpf_timer in a single
map element. There could be one of each, but not more than one. Due to 'one
bpf_timer in one element' restriction do not support timers in global data,
since global data is a map of single element, but from bpf program side it's
seen as many global variables and restriction of single global timer would be
odd. The sys_bpf map_freeze and sys_mmap syscalls are not allowed on maps with
timers, since user space could have corrupted mmap element and crashed the
kernel. The maps with timers cannot be readonly. Due to these restrictions
search for bpf_timer in datasec BTF in case it was placed in the global data to
report clear error.
The previous patch allowed 'struct bpf_timer' as a first field in a map
element only. Relax this restriction.
Refactor lru map to s/bpf_lru_push_free/htab_lru_push_free/ to cancel and free
the timer when lru map deletes an element as a part of it eviction algorithm.
Make sure that bpf program cannot access 'struct bpf_timer' via direct load/store.
The timer operation are done through helpers only.
This is similar to 'struct bpf_spin_lock'.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-5-alexei.starovoitov@gmail.com
|
|
XDP programs are called from a NAPI poll context, which means the RCU
reference liveness is ensured by local_bh_disable(). Add
rcu_read_lock_bh_held() as a condition to the RCU checks for map lookups so
lockdep understands that the dereferences are safe from inside *either* an
rcu_read_lock() section *or* a local_bh_disable() section. While both
bh_disabled and rcu_read_lock() provide RCU protection, they are
semantically distinct, so we need both conditions to prevent lockdep
complaints.
This change is done in preparation for removing the redundant
rcu_read_lock()s from drivers.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210624160609.292325-5-toke@redhat.com
|
|
Fix some spelling mistakes in comments:
aother ==> another
Netiher ==> Neither
desribe ==> describe
intializing ==> initializing
funciton ==> function
wont ==> won't and move the word 'the' at the end to the next line
accross ==> across
pathes ==> paths
triggerred ==> triggered
excute ==> execute
ether ==> either
conervative ==> conservative
convetion ==> convention
markes ==> marks
interpeter ==> interpreter
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210525025659.8898-2-thunder.leizhen@huawei.com
|
|
Extend the existing bpf_map_lookup_and_delete_elem() functionality to
hashtab map types, in addition to stacks and queues.
Create a new hashtab bpf_map_ops function that does lookup and deletion
of the element under the same bucket lock and add the created map_ops to
bpf.h.
Signed-off-by: Denis Salopek <denis.salopek@sartura.hr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/4d18480a3e990ffbf14751ddef0325eed3be2966.1620763117.git.denis.salopek@sartura.hr
|
|
A typo is found out by codespell tool in 34th lines of hashtab.c:
$ codespell ./kernel/bpf/
./hashtab.c:34 : differrent ==> different
Fix a typo found by codespell.
Signed-off-by: Liu xuzhi <liu.xuzhi@zte.com.cn>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210311123103.323589-1-liu.xuzhi@zte.com.cn
|
|
This patch added support for hashmap, percpu hashmap,
lru hashmap and percpu lru hashmap.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210226204927.3885020-1-yhs@fb.com
|
|
Since sleepable programs are now executing under migrate_disable
the per-cpu maps are safe to use.
The map-in-map were ok to use in sleepable from the time sleepable
progs were introduced.
Note that non-preallocated maps are still not safe, since there is
no rcu_read_lock yet in sleepable programs and dynamically allocated
map elements are relying on rcu protection. The sleepable programs
have rcu_read_lock_trace instead. That limitation will be addresses
in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-9-alexei.starovoitov@gmail.com
|
|
We noticed that with a LOCKDEP enabled kernel,
allocating a hash table with 65536 buckets would
use more than 60ms.
htab_init_buckets() runs from process context,
it is safe to schedule to avoid latency spikes.
Fixes: c50eb518e262 ("bpf: Use separate lockdep class for each hashtab")
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201221192506.707584-1-eric.dumazet@gmail.com
|
|
__htab_map_lookup_and_delete_batch() stores a user pointer in the local
variable ubatch and uses that in copy_{from,to}_user(), but ubatch misses a
__user annotation.
So, sparse warns in the various assignments and uses of ubatch:
kernel/bpf/hashtab.c:1415:24: warning: incorrect type in initializer
(different address spaces)
kernel/bpf/hashtab.c:1415:24: expected void *ubatch
kernel/bpf/hashtab.c:1415:24: got void [noderef] __user *
kernel/bpf/hashtab.c:1444:46: warning: incorrect type in argument 2
(different address spaces)
kernel/bpf/hashtab.c:1444:46: expected void const [noderef] __user *from
kernel/bpf/hashtab.c:1444:46: got void *ubatch
kernel/bpf/hashtab.c:1608:16: warning: incorrect type in assignment
(different address spaces)
kernel/bpf/hashtab.c:1608:16: expected void *ubatch
kernel/bpf/hashtab.c:1608:16: got void [noderef] __user *
kernel/bpf/hashtab.c:1609:26: warning: incorrect type in argument 1
(different address spaces)
kernel/bpf/hashtab.c:1609:26: expected void [noderef] __user *to
kernel/bpf/hashtab.c:1609:26: got void *ubatch
Add the __user annotation to repair this chain of propagating __user
annotations in __htab_map_lookup_and_delete_batch().
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201207123720.19111-1-lukas.bulwahn@gmail.com
|
|
Use of bpf_map_charge_init() was making sure hash tables would not use more
than 4GB of memory.
Since the implicit check disappeared, we have to be more careful
about overflows, to support big hash tables.
syzbot triggers a panic using :
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_LRU_HASH, key_size=16384, value_size=8,
max_entries=262200, map_flags=0, inner_map_fd=-1, map_name="",
map_ifindex=0, btf_fd=-1, btf_key_type_id=0, btf_value_type_id=0,
btf_vmlinux_value_type_id=0}, 64) = ...
BUG: KASAN: vmalloc-out-of-bounds in bpf_percpu_lru_populate kernel/bpf/bpf_lru_list.c:594 [inline]
BUG: KASAN: vmalloc-out-of-bounds in bpf_lru_populate+0x4ef/0x5e0 kernel/bpf/bpf_lru_list.c:611
Write of size 2 at addr ffffc90017e4a020 by task syz-executor.5/19786
CPU: 0 PID: 19786 Comm: syz-executor.5 Not tainted 5.10.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0x5/0x4c8 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
bpf_percpu_lru_populate kernel/bpf/bpf_lru_list.c:594 [inline]
bpf_lru_populate+0x4ef/0x5e0 kernel/bpf/bpf_lru_list.c:611
prealloc_init kernel/bpf/hashtab.c:319 [inline]
htab_map_alloc+0xf6e/0x1230 kernel/bpf/hashtab.c:507
find_and_alloc_map kernel/bpf/syscall.c:123 [inline]
map_create kernel/bpf/syscall.c:829 [inline]
__do_sys_bpf+0xa81/0x5170 kernel/bpf/syscall.c:4336
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45deb9
Code: 0d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fd93fbc0c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 0000000000001a40 RCX: 000000000045deb9
RDX: 0000000000000040 RSI: 0000000020000280 RDI: 0000000000000000
RBP: 000000000119bf60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000119bf2c
R13: 00007ffc08a7be8f R14: 00007fd93fbc19c0 R15: 000000000119bf2c
Fixes: 755e5d55367a ("bpf: Eliminate rlimit-based memory accounting for hashtab maps")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/bpf/20201207182821.3940306-1-eric.dumazet@gmail.com
|
|
Do not use rlimit-based memory accounting for hashtab maps.
It has been replaced with the memcg-based memory accounting.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-24-guro@fb.com
|
|
Include percpu objects and the size of map metadata into the
accounting.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-13-guro@fb.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-11-14
1) Add BTF generation for kernel modules and extend BTF infra in kernel
e.g. support for split BTF loading and validation, from Andrii Nakryiko.
2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
on inlined branch conditions, from Alexei Starovoitov.
3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.
4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
infra, from Martin KaFai Lau.
5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
XDP_REDIRECT path, from Lorenzo Bianconi.
6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
context, from Song Liu.
7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
for different target archs on same source tree, from Jean-Philippe Brucker.
8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.
9) Move functionality from test_tcpbpf_user into the test_progs framework so it
can run in BPF CI, from Alexander Duyck.
10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.
Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.
[0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/
https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
net: mlx5: Add xdp tx return bulking support
net: mvpp2: Add xdp tx return bulking support
net: mvneta: Add xdp tx return bulking support
net: page_pool: Add bulk support for ptr_ring
net: xdp: Introduce bulking for xdp tx return path
bpf: Expose bpf_d_path helper to sleepable LSM hooks
bpf: Augment the set of sleepable LSM hooks
bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Rename some functions in bpf_sk_storage
bpf: Folding omem_charge() into sk_storage_charge()
selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
selftests/bpf: Add skb_pkt_end test
bpf: Support for pointers beyond pkt_end.
tools/bpf: Always run the *-clean recipes
tools/bpf: Add bootstrap/ to .gitignore
bpf: Fix NULL dereference in bpf_task_storage
tools/bpftool: Fix build slowdown
tools/runqslower: Build bpftool using HOSTCC
tools/runqslower: Enable out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently key_size of hashtab is limited to MAX_BPF_STACK.
As the key of hashtab can also be a value from a per cpu map it can be
larger than MAX_BPF_STACK.
The use-case for this patch originates to implement allow/disallow
lists for files and file paths. The maximum length of file paths is
defined by PATH_MAX with 4096 chars including nul.
This limit exceeds MAX_BPF_STACK.
Changelog:
v5:
- Fix cast overflow
v4:
- Utilize BPF skeleton in tests
- Rebase
v3:
- Rebase
v2:
- Add a test for bpf side
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201029201442.596690-1-dev@der-flo.net
|
|
Zero-fill element values for all other cpus than current, just as
when not using prealloc. This is the only way the bpf program can
ensure known initial values for all cpus ('onallcpus' cannot be
set when coming from the bpf program).
The scenario is: bpf program inserts some elements in a per-cpu
map, then deletes some (or userspace does). When later adding
new elements using bpf_map_update_elem(), the bpf program can
only set the value of the new elements for the current cpu.
When prealloc is enabled, previously deleted elements are re-used.
Without the fix, values for other cpus remain whatever they were
when the re-used entry was previously freed.
A selftest is added to validate correct operation in above
scenario as well as in case of LRU per-cpu map element re-use.
Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements")
Signed-off-by: David Verbeiren <david.verbeiren@tessares.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net
|
|
syzbot was able to trigger a use-after-free in htab_map_alloc() [1]
htab_map_alloc() lacks a call to lockdep_unregister_key() in its error path.
lockdep_register_key() and lockdep_unregister_key() can not fail,
it seems better to use them right after htab allocation and before
htab freeing, avoiding more goto/labels in htab_map_alloc()
[1]
BUG: KASAN: use-after-free in lockdep_register_key+0x356/0x3e0 kernel/locking/lockdep.c:1182
Read of size 8 at addr ffff88805fa67ad8 by task syz-executor.3/2356
CPU: 1 PID: 2356 Comm: syz-executor.3 Not tainted 5.9.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
lockdep_register_key+0x356/0x3e0 kernel/locking/lockdep.c:1182
htab_init_buckets kernel/bpf/hashtab.c:144 [inline]
htab_map_alloc+0x6c5/0x14a0 kernel/bpf/hashtab.c:521
find_and_alloc_map kernel/bpf/syscall.c:122 [inline]
map_create kernel/bpf/syscall.c:825 [inline]
__do_sys_bpf+0xa80/0x5180 kernel/bpf/syscall.c:4381
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45deb9
Code: 0d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0eafee1c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 0000000000001a00 RCX: 000000000045deb9
RDX: 0000000000000040 RSI: 0000000020000040 RDI: 405a020000000000
RBP: 000000000118bf60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118bf2c
R13: 00007ffd3cf9eabf R14: 00007f0eafee29c0 R15: 000000000118bf2c
Allocated by task 2053:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:461
kmalloc include/linux/slab.h:554 [inline]
kzalloc include/linux/slab.h:666 [inline]
htab_map_alloc+0xdf/0x14a0 kernel/bpf/hashtab.c:454
find_and_alloc_map kernel/bpf/syscall.c:122 [inline]
map_create kernel/bpf/syscall.c:825 [inline]
__do_sys_bpf+0xa80/0x5180 kernel/bpf/syscall.c:4381
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 2053:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0x102/0x140 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1577
slab_free mm/slub.c:3142 [inline]
kfree+0xdb/0x360 mm/slub.c:4124
htab_map_alloc+0x3f9/0x14a0 kernel/bpf/hashtab.c:549
find_and_alloc_map kernel/bpf/syscall.c:122 [inline]
map_create kernel/bpf/syscall.c:825 [inline]
__do_sys_bpf+0xa80/0x5180 kernel/bpf/syscall.c:4381
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88805fa67800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 728 bytes inside of
1024-byte region [ffff88805fa67800, ffff88805fa67c00)
The buggy address belongs to the page:
page:000000003c5582c4 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5fa60
head:000000003c5582c4 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head)
raw: 00fff00000010200 ffffea0000bc1200 0000000200000002 ffff888010041140
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88805fa67980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88805fa67a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88805fa67b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88805fa67b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: c50eb518e262 ("bpf: Use separate lockdep class for each hashtab")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201102114100.3103180-1-eric.dumazet@gmail.com
|
|
If a hashtab is accessed in both non-NMI and NMI context, the system may
deadlock on bucket->lock. Fix this issue with percpu counter map_locked.
map_locked rejects concurrent access to the same bucket from the same CPU.
To reduce memory overhead, map_locked is not added per bucket. Instead,
8 percpu counters are added to each hashtab. buckets are assigned to these
counters based on the lower bits of its hash.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201029071925.3103400-3-songliubraving@fb.com
|
|
If a hashtab is accessed in both NMI and non-NMI contexts, it may cause
deadlock in bucket->lock. LOCKDEP NMI warning highlighted this issue:
./test_progs -t stacktrace
[ 74.828970]
[ 74.828971] ================================
[ 74.828972] WARNING: inconsistent lock state
[ 74.828973] 5.9.0-rc8+ #275 Not tainted
[ 74.828974] --------------------------------
[ 74.828975] inconsistent {INITIAL USE} -> {IN-NMI} usage.
[ 74.828976] taskset/1174 [HC2[2]:SC0[0]:HE0:SE1] takes:
[ 74.828977] ffffc90000ee96b0 (&htab->buckets[i].raw_lock){....}-{2:2}, at: htab_map_update_elem+0x271/0x5a0
[ 74.828981] {INITIAL USE} state was registered at:
[ 74.828982] lock_acquire+0x137/0x510
[ 74.828983] _raw_spin_lock_irqsave+0x43/0x90
[ 74.828984] htab_map_update_elem+0x271/0x5a0
[ 74.828984] 0xffffffffa0040b34
[ 74.828985] trace_call_bpf+0x159/0x310
[ 74.828986] perf_trace_run_bpf_submit+0x5f/0xd0
[ 74.828987] perf_trace_urandom_read+0x1be/0x220
[ 74.828988] urandom_read_nowarn.isra.0+0x26f/0x380
[ 74.828989] vfs_read+0xf8/0x280
[ 74.828989] ksys_read+0xc9/0x160
[ 74.828990] do_syscall_64+0x33/0x40
[ 74.828991] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 74.828992] irq event stamp: 1766
[ 74.828993] hardirqs last enabled at (1765): [<ffffffff82800ace>] asm_exc_page_fault+0x1e/0x30
[ 74.828994] hardirqs last disabled at (1766): [<ffffffff8267df87>] irqentry_enter+0x37/0x60
[ 74.828995] softirqs last enabled at (856): [<ffffffff81043e7c>] fpu__clear+0xac/0x120
[ 74.828996] softirqs last disabled at (854): [<ffffffff81043df0>] fpu__clear+0x20/0x120
[ 74.828997]
[ 74.828998] other info that might help us debug this:
[ 74.828999] Possible unsafe locking scenario:
[ 74.828999]
[ 74.829000] CPU0
[ 74.829001] ----
[ 74.829001] lock(&htab->buckets[i].raw_lock);
[ 74.829003] <Interrupt>
[ 74.829004] lock(&htab->buckets[i].raw_lock);
[ 74.829006]
[ 74.829006] *** DEADLOCK ***
[ 74.829007]
[ 74.829008] 1 lock held by taskset/1174:
[ 74.829008] #0: ffff8883ec3fd020 (&cpuctx_lock){-...}-{2:2}, at: perf_event_task_tick+0x101/0x650
[ 74.829012]
[ 74.829013] stack backtrace:
[ 74.829014] CPU: 0 PID: 1174 Comm: taskset Not tainted 5.9.0-rc8+ #275
[ 74.829015] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[ 74.829016] Call Trace:
[ 74.829016] <NMI>
[ 74.829017] dump_stack+0x9a/0xd0
[ 74.829018] lock_acquire+0x461/0x510
[ 74.829019] ? lock_release+0x6b0/0x6b0
[ 74.829020] ? stack_map_get_build_id_offset+0x45e/0x800
[ 74.829021] ? htab_map_update_elem+0x271/0x5a0
[ 74.829022] ? rcu_read_lock_held_common+0x1a/0x50
[ 74.829022] ? rcu_read_lock_held+0x5f/0xb0
[ 74.829023] _raw_spin_lock_irqsave+0x43/0x90
[ 74.829024] ? htab_map_update_elem+0x271/0x5a0
[ 74.829025] htab_map_update_elem+0x271/0x5a0
[ 74.829026] bpf_prog_1fd9e30e1438d3c5_oncpu+0x9c/0xe88
[ 74.829027] bpf_overflow_handler+0x127/0x320
[ 74.829028] ? perf_event_text_poke_output+0x4d0/0x4d0
[ 74.829029] ? sched_clock_cpu+0x18/0x130
[ 74.829030] __perf_event_overflow+0xae/0x190
[ 74.829030] handle_pmi_common+0x34c/0x470
[ 74.829031] ? intel_pmu_save_and_restart+0x90/0x90
[ 74.829032] ? lock_acquire+0x3f8/0x510
[ 74.829033] ? lock_release+0x6b0/0x6b0
[ 74.829034] intel_pmu_handle_irq+0x11e/0x240
[ 74.829034] perf_event_nmi_handler+0x40/0x60
[ 74.829035] nmi_handle+0x110/0x360
[ 74.829036] ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[ 74.829037] default_do_nmi+0x6b/0x170
[ 74.829038] exc_nmi+0x106/0x130
[ 74.829038] end_repeat_nmi+0x16/0x55
[ 74.829039] RIP: 0010:__intel_pmu_enable_all.constprop.0+0x72/0xf0
[ 74.829042] Code: 2f 1f 03 48 8d bb b8 0c 00 00 e8 29 09 41 00 48 ...
[ 74.829043] RSP: 0000:ffff8880a604fc90 EFLAGS: 00000002
[ 74.829044] RAX: 000000070000000f RBX: ffff8883ec2195a0 RCX: 000000000000038f
[ 74.829045] RDX: 0000000000000007 RSI: ffffffff82e72c20 RDI: ffff8883ec21a258
[ 74.829046] RBP: 000000070000000f R08: ffffffff8101b013 R09: fffffbfff0a7982d
[ 74.829047] R10: ffffffff853cc167 R11: fffffbfff0a7982c R12: 0000000000000000
[ 74.829049] R13: ffff8883ec3f0af0 R14: ffff8883ec3fd120 R15: ffff8883e9c92098
[ 74.829049] ? intel_pmu_lbr_enable_all+0x43/0x240
[ 74.829050] ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[ 74.829051] ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[ 74.829052] </NMI>
[ 74.829053] perf_event_task_tick+0x48d/0x650
[ 74.829054] scheduler_tick+0x129/0x210
[ 74.829054] update_process_times+0x37/0x70
[ 74.829055] tick_sched_handle.isra.0+0x35/0x90
[ 74.829056] tick_sched_timer+0x8f/0xb0
[ 74.829057] __hrtimer_run_queues+0x364/0x7d0
[ 74.829058] ? tick_sched_do_timer+0xa0/0xa0
[ 74.829058] ? enqueue_hrtimer+0x1e0/0x1e0
[ 74.829059] ? recalibrate_cpu_khz+0x10/0x10
[ 74.829060] ? ktime_get_update_offsets_now+0x1a3/0x360
[ 74.829061] hrtimer_interrupt+0x1bb/0x360
[ 74.829062] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 74.829063] __sysvec_apic_timer_interrupt+0xed/0x3d0
[ 74.829064] sysvec_apic_timer_interrupt+0x3f/0xd0
[ 74.829064] ? asm_sysvec_apic_timer_interrupt+0xa/0x20
[ 74.829065] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 74.829066] RIP: 0033:0x7fba18d579b4
[ 74.829068] Code: 74 54 44 0f b6 4a 04 41 83 e1 0f 41 80 f9 ...
[ 74.829069] RSP: 002b:00007ffc9ba69570 EFLAGS: 00000206
[ 74.829071] RAX: 00007fba192084c0 RBX: 00007fba18c24d28 RCX: 00000000000007a4
[ 74.829072] RDX: 00007fba18c30488 RSI: 0000000000000000 RDI: 000000000000037b
[ 74.829073] RBP: 00007fba18ca5760 R08: 00007fba18c248fc R09: 00007fba18c94c30
[ 74.829074] R10: 000000000000002f R11: 0000000000073c30 R12: 00007ffc9ba695e0
[ 74.829075] R13: 00000000000003f3 R14: 00007fba18c21ac8 R15: 00000000000058d6
However, such warning should not apply across multiple hashtabs. The
system will not deadlock if one hashtab is used in NMI, while another
hashtab is used in non-NMI.
Use separate lockdep class for each hashtab, so that we don't get this
false alert.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201029071925.3103400-2-songliubraving@fb.com
|
|
Recent work in f4d05259213f ("bpf: Add map_meta_equal map ops") and 134fede4eecf
("bpf: Relax max_entries check for most of the inner map types") added support
for dynamic inner max elements for most map-in-map types. Exceptions were maps
like array or prog array where the map_gen_lookup() callback uses the maps'
max_entries field as a constant when emitting instructions.
We recently implemented Maglev consistent hashing into Cilium's load balancer
which uses map-in-map with an outer map being hash and inner being array holding
the Maglev backend table for each service. This has been designed this way in
order to reduce overall memory consumption given the outer hash map allows to
avoid preallocating a large, flat memory area for all services. Also, the
number of service mappings is not always known a-priori.
The use case for dynamic inner array map entries is to further reduce memory
overhead, for example, some services might just have a small number of back
ends while others could have a large number. Right now the Maglev backend table
for small and large number of backends would need to have the same inner array
map entries which adds a lot of unneeded overhead.
Dynamic inner array map entries can be realized by avoiding the inlined code
generation for their lookup. The lookup will still be efficient since it will
be calling into array_map_lookup_elem() directly and thus avoiding retpoline.
The patch adds a BPF_F_INNER_MAP flag to map creation which therefore skips
inline code generation and relaxes array_map_meta_equal() check to ignore both
maps' max_entries. This also still allows to have faster lookups for map-in-map
when BPF_F_INNER_MAP is not specified and hence dynamic max_entries not needed.
Example code generation where inner map is dynamic sized array:
# bpftool p d x i 125
int handle__sys_enter(void * ctx):
; int handle__sys_enter(void *ctx)
0: (b4) w1 = 0
; int key = 0;
1: (63) *(u32 *)(r10 -4) = r1
2: (bf) r2 = r10
;
3: (07) r2 += -4
; inner_map = bpf_map_lookup_elem(&outer_arr_dyn, &key);
4: (18) r1 = map[id:468]
6: (07) r1 += 272
7: (61) r0 = *(u32 *)(r2 +0)
8: (35) if r0 >= 0x3 goto pc+5
9: (67) r0 <<= 3
10: (0f) r0 += r1
11: (79) r0 = *(u64 *)(r0 +0)
12: (15) if r0 == 0x0 goto pc+1
13: (05) goto pc+1
14: (b7) r0 = 0
15: (b4) w6 = -1
; if (!inner_map)
16: (15) if r0 == 0x0 goto pc+6
17: (bf) r2 = r10
;
18: (07) r2 += -4
; val = bpf_map_lookup_elem(inner_map, &key);
19: (bf) r1 = r0 | No inlining but instead
20: (85) call array_map_lookup_elem#149280 | call to array_map_lookup_elem()
; return val ? *val : -1; | for inner array lookup.
21: (15) if r0 == 0x0 goto pc+1
; return val ? *val : -1;
22: (61) r6 = *(u32 *)(r0 +0)
; }
23: (bc) w0 = w6
24: (95) exit
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-4-daniel@iogearbox.net
|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, for hashmap, the bpf iterator will grab a bucket lock, a
spinlock, before traversing the elements in the bucket. This can ensure
all bpf visted elements are valid. But this mechanism may cause
deadlock if update/deletion happens to the same bucket of the
visited map in the program. For example, if we added bpf_map_update_elem()
call to the same visited element in selftests bpf_iter_bpf_hash_map.c,
we will have the following deadlock:
============================================
WARNING: possible recursive locking detected
5.9.0-rc1+ #841 Not tainted
--------------------------------------------
test_progs/1750 is trying to acquire lock:
ffff9a5bb73c5e70 (&htab->buckets[i].raw_lock){....}-{2:2}, at: htab_map_update_elem+0x1cf/0x410
but task is already holding lock:
ffff9a5bb73c5e20 (&htab->buckets[i].raw_lock){....}-{2:2}, at: bpf_hash_map_seq_find_next+0x94/0x120
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&htab->buckets[i].raw_lock);
lock(&htab->buckets[i].raw_lock);
*** DEADLOCK ***
...
Call Trace:
dump_stack+0x78/0xa0
__lock_acquire.cold.74+0x209/0x2e3
lock_acquire+0xba/0x380
? htab_map_update_elem+0x1cf/0x410
? __lock_acquire+0x639/0x20c0
_raw_spin_lock_irqsave+0x3b/0x80
? htab_map_update_elem+0x1cf/0x410
htab_map_update_elem+0x1cf/0x410
? lock_acquire+0xba/0x380
bpf_prog_ad6dab10433b135d_dump_bpf_hash_map+0x88/0xa9c
? find_held_lock+0x34/0xa0
bpf_iter_run_prog+0x81/0x16e
__bpf_hash_map_seq_show+0x145/0x180
bpf_seq_read+0xff/0x3d0
vfs_read+0xad/0x1c0
ksys_read+0x5f/0xe0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
The bucket_lock first grabbed in seq_ops->next() called by bpf_seq_read(),
and then grabbed again in htab_map_update_elem() in the bpf program, causing
deadlocks.
Actually, we do not need bucket_lock here, we can just use rcu_read_lock()
similar to netlink iterator where the rcu_read_{lock,unlock} likes below:
seq_ops->start():
rcu_read_lock();
seq_ops->next():
rcu_read_unlock();
/* next element */
rcu_read_lock();
seq_ops->stop();
rcu_read_unlock();
Compared to old bucket_lock mechanism, if concurrent updata/delete happens,
we may visit stale elements, miss some elements, or repeat some elements.
I think this is a reasonable compromise. For users wanting to avoid
stale, missing/repeated accesses, bpf_map batch access syscall interface
can be used.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200902235340.2001375-1-yhs@fb.com
|
|
Introduce sleepable BPF programs that can request such property for themselves
via BPF_F_SLEEPABLE flag at program load time. In such case they will be able
to use helpers like bpf_copy_from_user() that might sleep. At present only
fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only
when they are attached to kernel functions that are known to allow sleeping.
The non-sleepable programs are relying on implicit rcu_read_lock() and
migrate_disable() to protect life time of programs, maps that they use and
per-cpu kernel structures used to pass info between bpf programs and the
kernel. The sleepable programs cannot be enclosed into rcu_read_lock().
migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs
should not be enclosed in migrate_disable() as well. Therefore
rcu_read_lock_trace is used to protect the life time of sleepable progs.
There are many networking and tracing program types. In many cases the
'struct bpf_prog *' pointer itself is rcu protected within some other kernel
data structure and the kernel code is using rcu_dereference() to load that
program pointer and call BPF_PROG_RUN() on it. All these cases are not touched.
Instead sleepable bpf programs are allowed with bpf trampoline only. The
program pointers are hard-coded into generated assembly of bpf trampoline and
synchronize_rcu_tasks_trace() is used to protect the life time of the program.
The same trampoline can hold both sleepable and non-sleepable progs.
When rcu_read_lock_trace is held it means that some sleepable bpf program is
running from bpf trampoline. Those programs can use bpf arrays and preallocated
hash/lru maps. These map types are waiting on programs to complete via
synchronize_rcu_tasks_trace();
Updates to trampoline now has to do synchronize_rcu_tasks_trace() and
synchronize_rcu_tasks() to wait for sleepable progs to finish and for
trampoline assembly to finish.
This is the first step of introducing sleepable progs. Eventually dynamically
allocated hash maps can be allowed and networking program types can become
sleepable too.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com
|
|
Some properties of the inner map is used in the verification time.
When an inner map is inserted to an outer map at runtime,
bpf_map_meta_equal() is currently used to ensure those properties
of the inserting inner map stays the same as the verification
time.
In particular, the current bpf_map_meta_equal() checks max_entries which
turns out to be too restrictive for most of the maps which do not use
max_entries during the verification time. It limits the use case that
wants to replace a smaller inner map with a larger inner map. There are
some maps do use max_entries during verification though. For example,
the map_gen_lookup in array_map_ops uses the max_entries to generate
the inline lookup code.
To accommodate differences between maps, the map_meta_equal is added
to bpf_map_ops. Each map-type can decide what to check when its
map is used as an inner map during runtime.
Also, some map types cannot be used as an inner map and they are
currently black listed in bpf_map_meta_alloc() in map_in_map.c.
It is not unusual that the new map types may not aware that such
blacklist exists. This patch enforces an explicit opt-in
and only allows a map to be used as an inner map if it has
implemented the map_meta_equal ops. It is based on the
discussion in [1].
All maps that support inner map has its map_meta_equal points
to bpf_map_meta_equal in this patch. A later patch will
relax the max_entries check for most maps. bpf_types.h
counts 28 map types. This patch adds 23 ".map_meta_equal"
by using coccinelle. -5 for
BPF_MAP_TYPE_PROG_ARRAY
BPF_MAP_TYPE_(PERCPU)_CGROUP_STORAGE
BPF_MAP_TYPE_STRUCT_OPS
BPF_MAP_TYPE_ARRAY_OF_MAPS
BPF_MAP_TYPE_HASH_OF_MAPS
The "if (inner_map->inner_map_meta)" check in bpf_map_meta_alloc()
is moved such that the same error is returned.
[1]: https://lore.kernel.org/bpf/20200522022342.899756-1-kafai@fb.com/
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011806.1970400-1-kafai@fb.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-08-04
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 9 day(s) which contain
a total of 135 files changed, 4603 insertions(+), 1013 deletions(-).
The main changes are:
1) Implement bpf_link support for XDP. Also add LINK_DETACH operation for the BPF
syscall allowing processes with BPF link FD to force-detach, from Andrii Nakryiko.
2) Add BPF iterator for map elements and to iterate all BPF programs for efficient
in-kernel inspection, from Yonghong Song and Alexei Starovoitov.
3) Separate bpf_get_{stack,stackid}() helpers for perf events in BPF to avoid
unwinder errors, from Song Liu.
4) Allow cgroup local storage map to be shared between programs on the same
cgroup. Also extend BPF selftests with coverage, from YiFei Zhu.
5) Add BPF exception tables to ARM64 JIT in order to be able to JIT BPF_PROBE_MEM
load instructions, from Jean-Philippe Brucker.
6) Follow-up fixes on BPF socket lookup in combination with reuseport group
handling. Also add related BPF selftests, from Jakub Sitnicki.
7) Allow to use socket storage in BPF_PROG_TYPE_CGROUP_SOCK-typed programs for
socket create/release as well as bind functions, from Stanislav Fomichev.
8) Fix an info leak in xsk_getsockopt() when retrieving XDP stats via old struct
xdp_statistics, from Peilin Ye.
9) Fix PT_REGS_RC{,_CORE}() macros in libbpf for MIPS arch, from Jerry Crunchtime.
10) Extend BPF kernel test infra with skb->family and skb->{local,remote}_ip{4,6}
fields and allow user space to specify skb->dev via ifindex, from Dmitry Yakunin.
11) Fix a bpftool segfault due to missing program type name and make it more robust
to prevent them in future gaps, from Quentin Monnet.
12) Consolidate cgroup helper functions across selftests and fix a v6 localhost
resolver issue, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Resolved kernel/bpf/btf.c using instructions from merge commit
69138b34a7248d2396ab85c8652e20c0c39beaba
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix HASH_OF_MAPS bug of not putting inner map pointer on bpf_map_elem_update()
operation. This is due to per-cpu extra_elems optimization, which bypassed
free_htab_elem() logic doing proper clean ups. Make sure that inner map is put
properly in optimized case as well.
Fixes: 8c290e60fa2a ("bpf: fix hashmap extra_elems logic")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729040913.2815687-1-andriin@fb.com
|
|
The bpf iterators for hash, percpu hash, lru hash
and lru percpu hash are implemented. During link time,
bpf_iter_reg->check_target() will check map type
and ensure the program access key/value region is
within the map defined key/value size limit.
For percpu hash and lru hash maps, the bpf program
will receive values for all cpus. The map element
bpf iterator infrastructure will prepare value
properly before passing the value pointer to the
bpf program.
This patch set supports readonly map keys and
read/write map values. It does not support deleting
map elements, e.g., from hash tables. If there is
a user case for this, the following mechanism can
be used to support map deletion for hashtab, etc.
- permit a new bpf program return value, e.g., 2,
to let bpf iterator know the map element should
be removed.
- since bucket lock is taken, the map element will be
queued.
- once bucket lock is released after all elements under
this bucket are traversed, all to-be-deleted map
elements can be deleted.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184114.590470-1-yhs@fb.com
|
|
bpf_free_used_maps() or close(map_fd) will trigger map_free callback.
bpf_free_used_maps() is called after bpf prog is no longer executing:
bpf_prog_put->call_rcu->bpf_prog_free->bpf_free_used_maps.
Hence there is no need to call synchronize_rcu() to protect map elements.
Note that hash_of_maps and array_of_maps update/delete inner maps via
sys_bpf() that calls maybe_wait_bpf_programs() and synchronize_rcu().
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/bpf/20200630043343.53195-2-alexei.starovoitov@gmail.com
|
|
Set map_btf_name and map_btf_id for all map types so that map fields can
be accessed by bpf programs.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/a825f808f22af52b018dbe82f1c7d29dab5fc978.1592600985.git.rdna@fb.com
|
|
There are multiple use-cases when it's convenient to have access to bpf
map fields, both `struct bpf_map` and map type specific struct-s such as
`struct bpf_array`, `struct bpf_htab`, etc.
For example while working with sock arrays it can be necessary to
calculate the key based on map->max_entries (some_hash % max_entries).
Currently this is solved by communicating max_entries via "out-of-band"
channel, e.g. via additional map with known key to get info about target
map. That works, but is not very convenient and error-prone while
working with many maps.
In other cases necessary data is dynamic (i.e. unknown at loading time)
and it's impossible to get it at all. For example while working with a
hash table it can be convenient to know how much capacity is already
used (bpf_htab.count.counter for BPF_F_NO_PREALLOC case).
At the same time kernel knows this info and can provide it to bpf
program.
Fill this gap by adding support to access bpf map fields from bpf
program for both `struct bpf_map` and map type specific fields.
Support is implemented via btf_struct_access() so that a user can define
their own `struct bpf_map` or map type specific struct in their program
with only necessary fields and preserve_access_index attribute, cast a
map to this struct and use a field.
For example:
struct bpf_map {
__u32 max_entries;
} __attribute__((preserve_access_index));
struct bpf_array {
struct bpf_map map;
__u32 elem_size;
} __attribute__((preserve_access_index));
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 4);
__type(key, __u32);
__type(value, __u32);
} m_array SEC(".maps");
SEC("cgroup_skb/egress")
int cg_skb(void *ctx)
{
struct bpf_array *array = (struct bpf_array *)&m_array;
struct bpf_map *map = (struct bpf_map *)&m_array;
/* .. use map->max_entries or array->map.max_entries .. */
}
Similarly to other btf_struct_access() use-cases (e.g. struct tcp_sock
in net/ipv4/bpf_tcp_ca.c) the patch allows access to any fields of
corresponding struct. Only reading from map fields is supported.
For btf_struct_access() to work there should be a way to know btf id of
a struct that corresponds to a map type. To get btf id there should be a
way to get a stringified name of map-specific struct, such as
"bpf_array", "bpf_htab", etc for a map type. Two new fields are added to
`struct bpf_map_ops` to handle it:
* .map_btf_name keeps a btf name of a struct returned by map_alloc();
* .map_btf_id is used to cache btf id of that struct.
To make btf ids calculation cheaper they're calculated once while
preparing btf_vmlinux and cached same way as it's done for btf_id field
of `struct bpf_func_proto`
While calculating btf ids, struct names are NOT checked for collision.
Collisions will be checked as a part of the work to prepare btf ids used
in verifier in compile time that should land soon. The only known
collision for `struct bpf_htab` (kernel/bpf/hashtab.c vs
net/core/sock_map.c) was fixed earlier.
Both new fields .map_btf_name and .map_btf_id must be set for a map type
for the feature to work. If neither is set for a map type, verifier will
return ENOTSUPP on a try to access map_ptr of corresponding type. If
just one of them set, it's verifier misconfiguration.
Only `struct bpf_array` for BPF_MAP_TYPE_ARRAY and `struct bpf_htab` for
BPF_MAP_TYPE_HASH are supported by this patch. Other map types will be
supported separately.
The feature is available only for CONFIG_DEBUG_INFO_BTF=y and gated by
perfmon_capable() so that unpriv programs won't have access to bpf map
fields.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/6479686a0cd1e9067993df57b4c3eef0e276fec9.1592600985.git.rdna@fb.com
|
|
Implement permissions as stated in uapi/linux/capability.h
In order to do that the verifier allow_ptr_leaks flag is split
into four flags and they are set as:
env->allow_ptr_leaks = bpf_allow_ptr_leaks();
env->bypass_spec_v1 = bpf_bypass_spec_v1();
env->bypass_spec_v4 = bpf_bypass_spec_v4();
env->bpf_capable = bpf_capable();
The first three currently equivalent to perfmon_capable(), since leaking kernel
pointers and reading kernel memory via side channel attacks is roughly
equivalent to reading kernel memory with cap_perfmon.
'bpf_capable' enables bounded loops, precision tracking, bpf to bpf calls and
other verifier features. 'allow_ptr_leaks' enable ptr leaks, ptr conversions,
subtraction of pointers. 'bypass_spec_v1' disables speculative analysis in the
verifier, run time mitigations in bpf array, and enables indirect variable
access in bpf programs. 'bypass_spec_v4' disables emission of sanitation code
by the verifier.
That means that the networking BPF program loaded with CAP_BPF + CAP_NET_ADMIN
will have speculative checks done by the verifier and other spectre mitigation
applied. Such networking BPF program will not be able to leak kernel pointers
and will not be able to access arbitrary kernel memory.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200513230355.7858-3-alexei.starovoitov@gmail.com
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200227001744.GA3317@embeddedor
|
|
PREEMPT_RT forbids certain operations like memory allocations (even with
GFP_ATOMIC) from atomic contexts. This is required because even with
GFP_ATOMIC the memory allocator calls into code pathes which acquire locks
with long held lock sections. To ensure the deterministic behaviour these
locks are regular spinlocks, which are converted to 'sleepable' spinlocks
on RT. The only true atomic contexts on an RT kernel are the low level
hardware handling, scheduling, low level interrupt handling, NMIs etc. None
of these contexts should ever do memory allocations.
As regular device interrupt handlers and soft interrupts are forced into
thread context, the existing code which does
spin_lock*(); alloc(GPF_ATOMIC); spin_unlock*();
just works.
In theory the BPF locks could be converted to regular spinlocks as well,
but the bucket locks and percpu_freelist locks can be taken from arbitrary
contexts (perf, kprobes, tracepoints) which are required to be atomic
contexts even on RT. These mechanisms require preallocated maps, so there
is no need to invoke memory allocations within the lock held sections.
BPF maps which need dynamic allocation are only used from (forced) thread
context on RT and can therefore use regular spinlocks which in turn allows
to invoke memory allocations from the lock held section.
To achieve this make the hash bucket lock a union of a raw and a regular
spinlock and initialize and lock/unlock either the raw spinlock for
preallocated maps or the regular variant for maps which require memory
allocations.
On a non RT kernel this distinction is neither possible nor required.
spinlock maps to raw_spinlock and the extra code and conditional is
optimized out by the compiler. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.509685912@linutronix.de
|
|
As a preparation for making the BPF locking RT friendly, factor out the
hash bucket lock operations into inline functions. This allows to do the
necessary RT modification in one place instead of sprinkling it all over
the place. No functional change.
The now unused htab argument of the lock/unlock functions will be used in
the next step which adds PREEMPT_RT support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.420416916@linutronix.de
|
|
The required protection is that the caller cannot be migrated to a
different CPU as these places take either a hash bucket lock or might
trigger a kprobe inside the memory allocator. Both scenarios can lead to
deadlocks. The deadlock prevention is per CPU by incrementing a per CPU
variable which temporarily blocks the invocation of BPF programs from perf
and kprobes.
Replace the open coded preempt_disable/enable() and this_cpu_inc/dec()
pairs with the new recursion prevention helpers to prepare BPF to work on
PREEMPT_RT enabled kernels. On a non-RT kernel the migrate disable/enable
in the helpers map to preempt_disable/enable(), i.e. no functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.211208533@linutronix.de
|
|
If an element is freed via RCU then recursion into BPF instrumentation
functions is not a concern. The element is already detached from the map
and the RCU callback does not hold any locks on which a kprobe, perf event
or tracepoint attached BPF program could deadlock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.259118710@linutronix.de
|
|
The comment where the bucket lock is acquired says:
/* bpf_map_update_elem() can be called in_irq() */
which is not really helpful and aside of that it does not explain the
subtle details of the hash bucket locks expecially in the context of BPF
and perf, kprobes and tracing.
Add a comment at the top of the file which explains the protection scopes
and the details how potential deadlocks are prevented.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145642.755793061@linutronix.de
|
|
Commit 057996380a42 ("bpf: Add batch ops to all htab bpf map")
added lookup_and_delete batch operation for hash table.
The current implementation has bpf_lru_push_free() inside
the bucket lock, which may cause a deadlock.
syzbot reports:
-> #2 (&htab->buckets[i].lock#2){....}:
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:159
htab_lru_map_delete_node+0xce/0x2f0 kernel/bpf/hashtab.c:593
__bpf_lru_list_shrink_inactive kernel/bpf/bpf_lru_list.c:220 [inline]
__bpf_lru_list_shrink+0xf9/0x470 kernel/bpf/bpf_lru_list.c:266
bpf_lru_list_pop_free_to_local kernel/bpf/bpf_lru_list.c:340 [inline]
bpf_common_lru_pop_free kernel/bpf/bpf_lru_list.c:447 [inline]
bpf_lru_pop_free+0x87c/0x1670 kernel/bpf/bpf_lru_list.c:499
prealloc_lru_pop+0x2c/0xa0 kernel/bpf/hashtab.c:132
__htab_lru_percpu_map_update_elem+0x67e/0xa90 kernel/bpf/hashtab.c:1069
bpf_percpu_hash_update+0x16e/0x210 kernel/bpf/hashtab.c:1585
bpf_map_update_value.isra.0+0x2d7/0x8e0 kernel/bpf/syscall.c:181
generic_map_update_batch+0x41f/0x610 kernel/bpf/syscall.c:1319
bpf_map_do_batch+0x3f5/0x510 kernel/bpf/syscall.c:3348
__do_sys_bpf+0x9b7/0x41e0 kernel/bpf/syscall.c:3460
__se_sys_bpf kernel/bpf/syscall.c:3355 [inline]
__x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:3355
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (&loc_l->lock){....}:
check_prev_add kernel/locking/lockdep.c:2475 [inline]
check_prevs_add kernel/locking/lockdep.c:2580 [inline]
validate_chain kernel/locking/lockdep.c:2970 [inline]
__lock_acquire+0x2596/0x4a00 kernel/locking/lockdep.c:3954
lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4484
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:159
bpf_common_lru_push_free kernel/bpf/bpf_lru_list.c:516 [inline]
bpf_lru_push_free+0x250/0x5b0 kernel/bpf/bpf_lru_list.c:555
__htab_map_lookup_and_delete_batch+0x8d4/0x1540 kernel/bpf/hashtab.c:1374
htab_lru_map_lookup_and_delete_batch+0x34/0x40 kernel/bpf/hashtab.c:1491
bpf_map_do_batch+0x3f5/0x510 kernel/bpf/syscall.c:3348
__do_sys_bpf+0x1f7d/0x41e0 kernel/bpf/syscall.c:3456
__se_sys_bpf kernel/bpf/syscall.c:3355 [inline]
__x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:3355
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Possible unsafe locking scenario:
CPU0 CPU2
---- ----
lock(&htab->buckets[i].lock#2);
lock(&l->lock);
lock(&htab->buckets[i].lock#2);
lock(&loc_l->lock);
*** DEADLOCK ***
To fix the issue, for htab_lru_map_lookup_and_delete_batch() in CPU0,
let us do bpf_lru_push_free() out of the htab bucket lock. This can
avoid the above deadlock scenario.
Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map")
Reported-by: syzbot+a38ff3d9356388f2fb83@syzkaller.appspotmail.com
Reported-by: syzbot+122b5421d14e68f29cd1@syzkaller.appspotmail.com
Suggested-by: Hillf Danton <hdanton@sina.com>
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200219234757.3544014-1-yhs@fb.com
|
|
Grabbing the spinlock for every bucket even if it's empty, was causing
significant perfomance cost when traversing htab maps that have only a
few entries. This patch addresses the issue by checking first the
bucket_cnt, if the bucket has some entries then we go and grab the
spinlock and proceed with the batching.
Tested with a htab of size 50K and different value of populated entries.
Before:
Benchmark Time(ns) CPU(ns)
---------------------------------------------
BM_DumpHashMap/1 2759655 2752033
BM_DumpHashMap/10 2933722 2930825
BM_DumpHashMap/200 3171680 3170265
BM_DumpHashMap/500 3639607 3635511
BM_DumpHashMap/1000 4369008 4364981
BM_DumpHashMap/5k 11171919 11134028
BM_DumpHashMap/20k 69150080 69033496
BM_DumpHashMap/39k 190501036 190226162
After:
Benchmark Time(ns) CPU(ns)
---------------------------------------------
BM_DumpHashMap/1 202707 200109
BM_DumpHashMap/10 213441 210569
BM_DumpHashMap/200 478641 472350
BM_DumpHashMap/500 980061 967102
BM_DumpHashMap/1000 1863835 1839575
BM_DumpHashMap/5k 8961836 8902540
BM_DumpHashMap/20k 69761497 69322756
BM_DumpHashMap/39k 187437830 186551111
Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200218172552.215077-1-brianvv@google.com
|
|
htab can't use generic batch support due some problematic behaviours
inherent to the data structre, i.e. while iterating the bpf map a
concurrent program might delete the next entry that batch was about to
use, in that case there's no easy solution to retrieve the next entry,
the issue has been discussed multiple times (see [1] and [2]).
The only way hmap can be traversed without the problem previously
exposed is by making sure that the map is traversing entire buckets.
This commit implements those strict requirements for hmap, the
implementation follows the same interaction that generic support with
some exceptions:
- If keys/values buffer are not big enough to traverse a bucket,
ENOSPC will be returned.
- out_batch contains the value of the next bucket in the iteration, not
the next key, but this is transparent for the user since the user
should never use out_batch for other than bpf batch syscalls.
This commits implements BPF_MAP_LOOKUP_BATCH and adds support for new
command BPF_MAP_LOOKUP_AND_DELETE_BATCH. Note that for update/delete
batch ops it is possible to use the generic implementations.
[1] https://lore.kernel.org/bpf/20190724165803.87470-1-brianvv@google.com/
[2] https://lore.kernel.org/bpf/20190906225434.3635421-1-yhs@fb.com/
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115184308.162644-6-brianvv@google.com
|
|
Honestly all the conflicts were simple overlapping changes,
nothing really interesting to report.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 64 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Most bpf map types doing similar checks and bytes to pages
conversion during memory allocation and charging.
Let's unify these checks by moving them into bpf_map_charge_init().
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In order to unify the existing memlock charging code with the
memcg-based memory accounting, which will be added later, let's
rework the current scheme.
Currently the following design is used:
1) .alloc() callback optionally checks if the allocation will likely
succeed using bpf_map_precharge_memlock()
2) .alloc() performs actual allocations
3) .alloc() callback calculates map cost and sets map.memory.pages
4) map_create() calls bpf_map_init_memlock() which sets map.memory.user
and performs actual charging; in case of failure the map is
destroyed
<map is in use>
1) bpf_map_free_deferred() calls bpf_map_release_memlock(), which
performs uncharge and releases the user
2) .map_free() callback releases the memory
The scheme can be simplified and made more robust:
1) .alloc() calculates map cost and calls bpf_map_charge_init()
2) bpf_map_charge_init() sets map.memory.user and performs actual
charge
3) .alloc() performs actual allocations
<map is in use>
1) .map_free() callback releases the memory
2) bpf_map_charge_finish() performs uncharge and releases the user
The new scheme also allows to reuse bpf_map_charge_init()/finish()
functions for memcg-based accounting. Because charges are performed
before actual allocations and uncharges after freeing the memory,
no bogus memory pressure can be created.
In cases when the map structure is not available (e.g. it's not
created yet, or is already destroyed), on-stack bpf_map_memory
structure is used. The charge can be transferred with the
bpf_map_charge_move() function.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Group "user" and "pages" fields of bpf_map into the bpf_map_memory
structure. Later it can be extended with "memcg" and other related
information.
The main reason for a such change (beside cosmetics) is to pass
bpf_map_memory structure to charging functions before the actual
allocation of bpf_map.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
One of the biggest issues we face right now with picking LRU map over
regular hash table is that a map walk out of user space, for example,
to just dump the existing entries or to remove certain ones, will
completely mess up LRU eviction heuristics and wrong entries such
as just created ones will get evicted instead. The reason for this
is that we mark an entry as "in use" via bpf_lru_node_set_ref() from
system call lookup side as well. Thus upon walk, all entries are
being marked, so information of actual least recently used ones
are "lost".
In case of Cilium where it can be used (besides others) as a BPF
based connection tracker, this current behavior causes disruption
upon control plane changes that need to walk the map from user space
to evict certain entries. Discussion result from bpfconf [0] was that
we should simply just remove marking from system call side as no
good use case could be found where it's actually needed there.
Therefore this patch removes marking for regular LRU and per-CPU
flavor. If there ever should be a need in future, the behavior could
be selected via map creation flag, but due to mentioned reason we
avoid this here.
[0] http://vger.kernel.org/bpfconf.html
Fixes: 29ba732acbee ("bpf: Add BPF_MAP_TYPE_LRU_HASH")
Fixes: 8f8449384ec3 ("bpf: Add BPF_MAP_TYPE_LRU_PERCPU_HASH")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
