summaryrefslogtreecommitdiffstats
path: root/init
AgeCommit message (Collapse)AuthorFilesLines
2022-12-13Merge tag 'modules-6.2-rc1' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull modules updates from Luis Chamberlain: "Tux gets for xmas an improvement to the average lookup performance of kallsyms_lookup_name() by 715x thanks to the work by Zhen Lei, which upgraded our old implementation from being O(n) to O(log(n)), while also retaining the old implementation support on /proc/kallsyms. The only penalty was increasing the memory footprint by 3 * kallsyms_num_syms. Folks who want to improve this further now also have a dedicated selftest facility through KALLSYMS_SELFTEST. Stephen Boyd added zstd in-kernel decompression support, but the only users of this would be folks using the load-pin LSM because otherwise we do module decompression in userspace. The only other thing with mentioning is a minor boot time optimization by Rasmus Villemoes which deferes param_sysfs_init() to late init. The rest is cleanups and minor fixes" * tag 'modules-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: livepatch: Call klp_match_callback() in klp_find_callback() to avoid code duplication module/decompress: Support zstd in-kernel decompression kallsyms: Remove unneeded semicolon kallsyms: Add self-test facility livepatch: Use kallsyms_on_each_match_symbol() to improve performance kallsyms: Add helper kallsyms_on_each_match_symbol() kallsyms: Reduce the memory occupied by kallsyms_seqs_of_names[] kallsyms: Correctly sequence symbols when CONFIG_LTO_CLANG=y kallsyms: Improve the performance of kallsyms_lookup_name() scripts/kallsyms: rename build_initial_tok_table() module: Fix NULL vs IS_ERR checking for module_get_next_page kernel/params.c: defer most of param_sysfs_init() to late_initcall time module: Remove unused macros module_addr_min/max module: remove redundant module_sysfs_initialized variable
2022-12-12Merge tag 'mm-nonmm-stable-2022-12-12' of ↵Linus Torvalds2-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - A ptrace API cleanup series from Sergey Shtylyov - Fixes and cleanups for kexec from ye xingchen - nilfs2 updates from Ryusuke Konishi - squashfs feature work from Xiaoming Ni: permit configuration of the filesystem's compression concurrency from the mount command line - A series from Akinobu Mita which addresses bound checking errors when writing to debugfs files - A series from Yang Yingliang to address rapidio memory leaks - A series from Zheng Yejian to address possible overflow errors in encode_comp_t() - And a whole shower of singleton patches all over the place * tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits) ipc: fix memory leak in init_mqueue_fs() hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount rapidio: devices: fix missing put_device in mport_cdev_open kcov: fix spelling typos in comments hfs: Fix OOB Write in hfs_asc2mac hfs: fix OOB Read in __hfs_brec_find relay: fix type mismatch when allocating memory in relay_create_buf() ocfs2: always read both high and low parts of dinode link count io-mapping: move some code within the include guarded section kernel: kcsan: kcsan_test: build without structleak plugin mailmap: update email for Iskren Chernev eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD rapidio: fix possible UAF when kfifo_alloc() fails relay: use strscpy() is more robust and safer cpumask: limit visibility of FORCE_NR_CPUS acct: fix potential integer overflow in encode_comp_t() acct: fix accuracy loss for input value of encode_comp_t() linux/init.h: include <linux/build_bug.h> and <linux/stringify.h> rapidio: rio: fix possible name leak in rio_register_mport() rapidio: fix possible name leaks when rio_add_device() fails ...
2022-11-22init/Kconfig: fix CC_HAS_ASM_GOTO_TIED_OUTPUT test with dashAlexandre Belloni1-1/+1
When using dash as /bin/sh, the CC_HAS_ASM_GOTO_TIED_OUTPUT test fails with a syntax error which is not the one we are looking for: <stdin>: In function ‘foo’: <stdin>:1:29: warning: missing terminating " character <stdin>:1:29: error: missing terminating " character <stdin>:2:5: error: expected ‘:’ before ‘+’ token <stdin>:2:7: warning: missing terminating " character <stdin>:2:7: error: missing terminating " character <stdin>:2:5: error: expected declaration or statement at end of input Removing '\n' solves this. Fixes: 1aa0e8b144b6 ("Kconfig: Add option for asm goto w/ tied outputs to workaround clang-13 bug") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-18initramfs: remove unnecessary (void*) conversionXU pengfei1-1/+1
Remove unnecessary void* type casting. Link: https://lkml.kernel.org/r/20221026080517.3221-1-xupengfei@nfschina.com Signed-off-by: XU pengfei <xupengfei@nfschina.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Disseldorp <ddiss@suse.de> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: wuchi <wuchi.zero@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-18proc: give /proc/cmdline sizeAlexey Dobriyan1-2/+5
Most /proc files don't have length (in fstat sense). This leads to inefficiencies when reading such files with APIs commonly found in modern programming languages. They open file, then fstat descriptor, get st_size == 0 and either assume file is empty or start reading without knowing target size. cat(1) does OK because it uses large enough buffer by default. But naive programs copy-pasted from SO aren't: let mut f = std::fs::File::open("/proc/cmdline").unwrap(); let mut buf: Vec<u8> = Vec::new(); f.read_to_end(&mut buf).unwrap(); will result in openat(AT_FDCWD, "/proc/cmdline", O_RDONLY|O_CLOEXEC) = 3 statx(0, NULL, AT_STATX_SYNC_AS_STAT, STATX_ALL, NULL) = -1 EFAULT (Bad address) statx(3, "", AT_STATX_SYNC_AS_STAT|AT_EMPTY_PATH, STATX_ALL, {stx_mask=STATX_BASIC_STATS|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0444, stx_size=0, ...}) = 0 lseek(3, 0, SEEK_CUR) = 0 read(3, "BOOT_IMAGE=(hd3,gpt2)/vmlinuz-5.", 32) = 32 read(3, "19.6-100.fc35.x86_64 root=/dev/m", 32) = 32 read(3, "apper/fedora_localhost--live-roo"..., 64) = 64 read(3, "ocalhost--live-swap rd.lvm.lv=fe"..., 128) = 116 read(3, "", 12) open/stat is OK, lseek looks silly but there are 3 unnecessary reads because Rust starts with 32 bytes per Vec<u8> and grows from there. In case of /proc/cmdline, the length is known precisely. Make variables readonly while I'm at it. P.S.: I tried to scp /proc/cpuinfo today and got empty file but this is separate story. Link: https://lkml.kernel.org/r/YxoywlbM73JJN3r+@localhost.localdomain Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-15kallsyms: Add self-test facilityZhen Lei1-0/+13
Added test cases for basic functions and performance of functions kallsyms_lookup_name(), kallsyms_on_each_symbol() and kallsyms_on_each_match_symbol(). It also calculates the compression rate of the kallsyms compression algorithm for the current symbol set. The basic functions test begins by testing a set of symbols whose address values are known. Then, traverse all symbol addresses and find the corresponding symbol name based on the address. It's impossible to determine whether these addresses are correct, but we can use the above three functions along with the addresses to test each other. Due to the traversal operation of kallsyms_on_each_symbol() is too slow, only 60 symbols can be tested in one second, so let it test on average once every 128 symbols. The other two functions validate all symbols. If the basic functions test is passed, print only performance test results. If the test fails, print error information, but do not perform subsequent performance tests. Start self-test automatically after system startup if CONFIG_KALLSYMS_SELFTEST=y. Example of output content: (prefix 'kallsyms_selftest:' is omitted start --------------------------------------------------------- | nr_symbols | compressed size | original size | ratio(%) | |---------------------------------------------------------| | 107543 | 1357912 | 2407433 | 56.40 | --------------------------------------------------------- kallsyms_lookup_name() looked up 107543 symbols The time spent on each symbol is (ns): min=630, max=35295, avg=7353 kallsyms_on_each_symbol() traverse all: 11782628 ns kallsyms_on_each_match_symbol() traverse all: 9261 ns finish Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-10-20init: Kconfig: fix spelling mistake "satify" -> "satisfy"Colin Ian King1-1/+1
There is a spelling mistake in a Kconfig description. Fix it. Link: https://lkml.kernel.org/r/20221007204339.2757753-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-12Merge tag 'mm-nonmm-stable-2022-10-11' of ↵Linus Torvalds4-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - hfs and hfsplus kmap API modernization (Fabio Francesco) - make crash-kexec work properly when invoked from an NMI-time panic (Valentin Schneider) - ntfs bugfixes (Hawkins Jiawei) - improve IPC msg scalability by replacing atomic_t's with percpu counters (Jiebin Sun) - nilfs2 cleanups (Minghao Chi) - lots of other single patches all over the tree! * tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits) include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype proc: test how it holds up with mapping'less process mailmap: update Frank Rowand email address ia64: mca: use strscpy() is more robust and safer init/Kconfig: fix unmet direct dependencies ia64: update config files nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure fork: remove duplicate included header files init/main.c: remove unnecessary (void*) conversions proc: mark more files as permanent nilfs2: remove the unneeded result variable nilfs2: delete unnecessary checks before brelse() checkpatch: warn for non-standard fixes tag style usr/gen_init_cpio.c: remove unnecessary -1 values from int file ipc/msg: mitigate the lock contention with percpu counter percpu: add percpu_counter_add_local and percpu_counter_sub_local fs/ocfs2: fix repeated words in comments relay: use kvcalloc to alloc page array in relay_alloc_page_array proc: make config PROC_CHILDREN depend on PROC_FS fs: uninline inode_maybe_inc_iversion() ...
2022-10-11init/Kconfig: fix unmet direct dependenciesRen Zhijie1-0/+1
Commit 3c07bfce92a5 ("proc: make config PROC_CHILDREN depend on PROC_FS") make config PROC_CHILDREN depend on PROC_FS. When CONFIG_PROC_FS is not set and CONFIG_CHECKPOINT_RESTORE=y, make menuconfig screams like this: WARNING: unmet direct dependencies detected for PROC_CHILDREN Depends on [n]: PROC_FS [=n] Selected by [y]: - CHECKPOINT_RESTORE [=y] CHECKPOINT_RESTORE would select PROC_CHILDREN which depends on PROC_FS, so add depends on PROC_FS to CHECKPOINT_RESTORE to fix this. Link: https://lkml.kernel.org/r/20220929070057.59044-1-renzhijie2@huawei.com Fixes: 3c07bfce92a5 ("proc: make config PROC_CHILDREN depend on PROC_FS") Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-10Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds2-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-10Merge tag 'kbuild-v6.1' of ↵Linus Torvalds5-41/+96
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove potentially incomplete targets when Kbuid is interrupted by SIGINT etc in case GNU Make may miss to do that when stderr is piped to another program. - Rewrite the single target build so it works more correctly. - Fix rpm-pkg builds with V=1. - List top-level subdirectories in ./Kbuild. - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms. - Avoid two different modules in lib/zstd/ having shared code, which potentially causes building the common code as build-in and modular back-and-forth. - Unify two modpost invocations to optimize the build process. - Remove head-y syntax in favor of linker scripts for placing particular sections in the head of vmlinux. - Bump the minimal GNU Make version to 3.82. - Clean up misc Makefiles and scripts. * tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) docs: bump minimal GNU Make version to 3.82 ia64: simplify esi object addition in Makefile Revert "kbuild: Check if linker supports the -X option" kbuild: rebuild .vmlinux.export.o when its prerequisite is updated kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o zstd: Fixing mixed module-builtin objects kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols kallsyms: take the input file instead of reading stdin kallsyms: drop duplicated ignore patterns from kallsyms.c kbuild: reuse mksysmap output for kallsyms mksysmap: update comment about __crc_* kbuild: remove head-y syntax kbuild: use obj-y instead extra-y for objects placed at the head kbuild: hide error checker logs for V=1 builds kbuild: re-run modpost when it is updated kbuild: unify two modpost invocations kbuild: move vmlinux.o rule to the top Makefile kbuild: move .vmlinux.objs rule to Makefile.modpost kbuild: list sub-directories in ./Kbuild Makefile.compiler: replace cc-ifversion with compiler-specific macros ...
2022-10-10Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds1-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: - Huawei reported that when they updated their kernel from 4.4 to something much newer, some userspace code they had broke, the culprit being the accidental removal of O_NONBLOCK from /dev/random way back in 5.6. It's been gone for over 2 years now and this is the first we've heard of it, but userspace breakage is userspace breakage, so O_NONBLOCK is now back. - Use randomness from hardware RNGs much more often during early boot, at the same interval that crng reseeds are done, from Dominik. - A semantic change in hardware RNG throttling, so that the hwrng framework can properly feed random.c with randomness from hardware RNGs that aren't specifically marked as creditable. A related patch coming to you via Herbert's hwrng tree depends on this one, not to compile, but just to function properly, so you may want to merge this PULL before that one. - A fix to clamp credited bits from the interrupts pool to the size of the pool sample. This is mainly just a theoretical fix, as it'd be pretty hard to exceed it in practice. - Oracle reported that InfiniBand TCP latency regressed by around 10-15% after a change a few cycles ago made at the request of the RT folks, in which we hoisted a somewhat rare operation (1 in 1024 times) out of the hard IRQ handler and into a workqueue, a pretty common and boring pattern. It turns out, though, that scheduling a worker from there has overhead of its own, whereas scheduling a timer on that same CPU for the next jiffy amortizes better and doesn't incur the same overhead. I also eliminated a cache miss by moving the work_struct (and subsequently, the timer_list) to below a critical cache line, so that the more critical members that are accessed on every hard IRQ aren't split between two cache lines. - The boot-time initialization of the RNG has been split into two approximate phases: what we can accomplish before timekeeping is possible and what we can accomplish after. This winds up being useful so that we can use RDRAND to seed the RNG before CONFIG_SLAB_FREELIST_RANDOM=y systems initialize slabs, in addition to other early uses of randomness. The effect is that systems with RDRAND (or a bootloader seed) will never see any warnings at all when setting CONFIG_WARN_ALL_UNSEEDED_RANDOM=y. And kfence benefits from getting a better seed of its own. - Small systems without much entropy sometimes wind up putting some truncated serial number read from flash into hostname, so contribute utsname changes to the RNG, without crediting. - Add smaller batches to serve requests for smaller integers, and make use of them when people ask for random numbers bounded by a given compile-time constant. This has positive effects all over the tree, most notably in networking and kfence. - The original jitter algorithm intended (I believe) to schedule the timer for the next jiffy, not the next-next jiffy, yet it used mod_timer(jiffies + 1), which will fire on the next-next jiffy, instead of what I believe was intended, mod_timer(jiffies), which will fire on the next jiffy. So fix that. - Fix a comment typo, from William. * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: random: clear new batches when bringing new CPUs online random: fix typos in get_random_bytes() comment random: schedule jitter credit for next jiffy, not in two jiffies prandom: make use of smaller types in prandom_u32_max random: add 8-bit and 16-bit batches utsname: contribute changes to RNG random: use init_utsname() instead of utsname() kfence: use better stack hash seed random: split initialization into early step and later step random: use expired timer rather than wq for mixing fast pool random: avoid reading two cache lines on irq randomness random: clamp credited irq bits to maximum mixed random: throttle hwrng writes if no entropy is credited random: use hwgenerator randomness more frequently at early boot random: restore O_NONBLOCK support
2022-10-10Merge tag 'sched-core-2022-10-07' of ↵Linus Torvalds1-9/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "Debuggability: - Change most occurances of BUG_ON() to WARN_ON_ONCE() - Reorganize & fix TASK_ state comparisons, turn it into a bitmap - Update/fix misc scheduler debugging facilities Load-balancing & regular scheduling: - Improve the behavior of the scheduler in presence of lot of SCHED_IDLE tasks - in particular they should not impact other scheduling classes. - Optimize task load tracking, cleanups & fixes - Clean up & simplify misc load-balancing code Freezer: - Rewrite the core freezer to behave better wrt thawing and be simpler in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting all the fallout. Deadline scheduler: - Fix the DL capacity-aware code - Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period() - Relax/optimize locking in task_non_contending() Cleanups: - Factor out the update_current_exec_runtime() helper - Various cleanups, simplifications" * tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) sched: Fix more TASK_state comparisons sched: Fix TASK_state comparisons sched/fair: Move call to list_last_entry() in detach_tasks sched/fair: Cleanup loop_max and loop_break sched/fair: Make sure to try to detach at least one movable task sched: Show PF_flag holes freezer,sched: Rewrite core freezer logic sched: Widen TAKS_state literals sched/wait: Add wait_event_state() sched/completion: Add wait_for_completion_state() sched: Add TASK_ANY for wait_task_inactive() sched: Change wait_task_inactive()s match_state freezer,umh: Clean up freezer/initrd interaction freezer: Have {,un}lock_system_sleep() save/restore flags sched: Rename task_running() to task_on_cpu() sched/fair: Cleanup for SIS_PROP sched/fair: Default to false in test_idle_cores() sched/fair: Remove useless check in select_idle_core() sched/fair: Avoid double search on same cpu sched/fair: Remove redundant check in select_idle_smt() ...
2022-10-09Merge tag 'powerpc-6.1-1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Remove our now never-true definitions for pgd_huge() and p4d_leaf(). - Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit. - Add support for syscall wrappers. - Add support for KFENCE on 64-bit. - Update 64-bit HV KVM to use the new guest state entry/exit accounting API. - Support execute-only memory when using the Radix MMU (P9 or later). - Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests. - Updates to our linker script to move more data into read-only sections. - Allow the VDSO to be randomised on 32-bit. - Many other small features and fixes. Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas, Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng Yongjun. * tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits) KVM: PPC: Book3S HV: Fix stack frame regs marker powerpc: Don't add __powerpc_ prefix to syscall entry points powerpc/64s/interrupt: Fix stack frame regs marker powerpc/64: Fix msr_check_and_set/clear MSR[EE] race powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN powerpc/pseries: Add firmware details to the hardware description powerpc/powernv: Add opal details to the hardware description powerpc: Add device-tree model to the hardware description powerpc/64: Add logical PVR to the hardware description powerpc: Add PVR & CPU name to hardware description powerpc: Add hardware description string powerpc/configs: Enable PPC_UV in powernv_defconfig powerpc/configs: Update config files for removed/renamed symbols powerpc/mm: Fix UBSAN warning reported on hugetlb powerpc/mm: Always update max/min_low_pfn in mem_topology_setup() powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range powerpc: Drops STABS_DEBUG from linker scripts powerpc/64s: Remove lost/old comment powerpc/64s: Remove old STAB comment powerpc: remove orphan systbl_chk.sh ...
2022-10-03init/main.c: remove unnecessary (void*) conversionsZhou jie1-2/+2
The void pointer object can be directly assigned to different structure objects, it does not need to be cast. Link: https://lkml.kernel.org/r/20220928014539.11046-1-zhoujie@nfschina.com Signed-off-by: Zhou jie <zhoujie@nfschina.com> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-03mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbolJohannes Weiner1-5/+0
Since 2d1c498072de ("mm: memcontrol: make swap tracking an integral part of memory control"), CONFIG_MEMCG_SWAP hasn't been a user-visible config option anymore, it just means CONFIG_MEMCG && CONFIG_SWAP. Update the sites accordingly and drop the symbol. [ While touching the docs, remove two references to CONFIG_MEMCG_KMEM, which hasn't been a user-visible symbol for over half a decade. ] Link: https://lkml.kernel.org/r/20220926135704.400818-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Shakeel Butt <shakeelb@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-03init: kmsan: call KMSAN initialization routinesAlexander Potapenko1-0/+3
kmsan_init_shadow() scans the mappings created at boot time and creates metadata pages for those mappings. When the memblock allocator returns pages to pagealloc, we reserve 2/3 of those pages and use them as metadata for the remaining 1/3. Once KMSAN starts, every page allocated by pagealloc has its associated shadow and origin pages. kmsan_initialize() initializes the bookkeeping for init_task and enables KMSAN. Link: https://lkml.kernel.org/r/20220915150417.722975-18-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-29random: split initialization into early step and later stepJason A. Donenfeld1-9/+8
The full RNG initialization relies on some timestamps, made possible with initialization functions like time_init() and timekeeping_init(). However, these are only available rather late in initialization. Meanwhile, other things, such as memory allocator functions, make use of the RNG much earlier. So split RNG initialization into two phases. We can provide arch randomness very early on, and then later, after timekeeping and such are available, initialize the rest. This ensures that, for example, slabs are properly randomized if RDRAND is available. Without this, CONFIG_SLAB_FREELIST_RANDOM=y loses a degree of its security, because its random seed is potentially deterministic, since it hasn't yet incorporated RDRAND. It also makes it possible to use a better seed in kfence, which currently relies on only the cycle counter. Another positive consequence is that on systems with RDRAND, running with CONFIG_WARN_ALL_UNSEEDED_RANDOM=y results in no warnings at all. One subtle side effect of this change is that on systems with no RDRAND, RDTSC is now only queried by random_init() once, committing the moment of the function call, instead of multiple times as before. This is intentional, as the multiple RDTSCs in a loop before weren't accomplishing very much, with jitter being better provided by try_to_generate_entropy(). Plus, filling blocks with RDTSC is still being done in extract_entropy(), which is necessarily called before random bytes are served anyway. Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-29kbuild: generate include/generated/compile.h in top MakefileMasahiro Yamada1-7/+1
Now that UTS_VERSION was separated out, this header can be generated much earlier, and probably the top Makefile is a better place to do it than init/Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29kbuild: build init/built-in.a just onceMasahiro Yamada5-36/+98
Kbuild builds init/built-in.a twice; first during the ordinary directory descending, second from scripts/link-vmlinux.sh. We do this because UTS_VERSION contains the build version and the timestamp. We cannot update it during the normal directory traversal since we do not yet know if we need to update vmlinux. UTS_VERSION is temporarily calculated, but omitted from the update check. Otherwise, vmlinux would be rebuilt every time. When Kbuild results in running link-vmlinux.sh, it increments the version number in the .version file and takes the timestamp at that time to really fix UTS_VERSION. However, updating the same file twice is a footgun. To avoid nasty timestamp issues, all build artifacts that depend on init/built-in.a are atomically generated in link-vmlinux.sh, where some of them do not need rebuilding. To fix this issue, this commit changes as follows: [1] Split UTS_VERSION out to include/generated/utsversion.h from include/generated/compile.h include/generated/utsversion.h is generated just before the vmlinux link. It is generated under include/generated/ because some decompressors (s390, x86) use UTS_VERSION. [2] Split init_uts_ns and linux_banner out to init/version-timestamp.c from init/version.c init_uts_ns and linux_banner contain UTS_VERSION. During the ordinary directory descending, they are compiled with __weak and used to determine if vmlinux needs relinking. Just before the vmlinux link, they are compiled without __weak to embed the real version and timestamp. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-29init/version.c: remove #include <linux/version.h>Masahiro Yamada1-1/+0
This is unneeded since commit 073a9ecb3a73 ("init/version.c: remove Version_<LINUX_VERSION_CODE> symbol"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-28Kbuild: add Rust supportMiguel Ojeda1-1/+45
Having most of the new files in place, we now enable Rust support in the build system, including `Kconfig` entries related to Rust, the Rust configuration printer and a few other bits. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com> Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de> Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Douglas Su <d0u9.su@outlook.com> Signed-off-by: Douglas Su <d0u9.su@outlook.com> Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Co-developed-by: Antonio Terceiro <antonio.terceiro@linaro.org> Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org> Co-developed-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Co-developed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-26Maple Tree: add new data structureLiam R. Howlett1-0/+2
Patch series "Introducing the Maple Tree" The maple tree is an RCU-safe range based B-tree designed to use modern processor cache efficiently. There are a number of places in the kernel that a non-overlapping range-based tree would be beneficial, especially one with a simple interface. If you use an rbtree with other data structures to improve performance or an interval tree to track non-overlapping ranges, then this is for you. The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf nodes. With the increased branching factor, it is significantly shorter than the rbtree so it has fewer cache misses. The removal of the linked list between subsequent entries also reduces the cache misses and the need to pull in the previous and next VMA during many tree alterations. The first user that is covered in this patch set is the vm_area_struct, where three data structures are replaced by the maple tree: the augmented rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The long term goal is to reduce or remove the mmap_lock contention. The plan is to get to the point where we use the maple tree in RCU mode. Readers will not block for writers. A single write operation will be allowed at a time. A reader re-walks if stale data is encountered. VMAs would be RCU enabled and this mode would be entered once multiple tasks are using the mm_struct. Davidlor said : Yes I like the maple tree, and at this stage I don't think we can ask for : more from this series wrt the MM - albeit there seems to still be some : folks reporting breakage. Fundamentally I see Liam's work to (re)move : complexity out of the MM (not to say that the actual maple tree is not : complex) by consolidating the three complimentary data structures very : much worth it considering performance does not take a hit. This was very : much a turn off with the range locking approach, which worst case scenario : incurred in prohibitive overhead. Also as Liam and Matthew have : mentioned, RCU opens up a lot of nice performance opportunities, and in : addition academia[1] has shown outstanding scalability of address spaces : with the foundation of replacing the locked rbtree with RCU aware trees. A similar work has been discovered in the academic press https://pdos.csail.mit.edu/papers/rcuvm:asplos12.pdf Sheer coincidence. We designed our tree with the intention of solving the hardest problem first. Upon settling on a b-tree variant and a rough outline, we researched ranged based b-trees and RCU b-trees and did find that article. So it was nice to find reassurances that we were on the right path, but our design choice of using ranges made that paper unusable for us. This patch (of 70): The maple tree is an RCU-safe range based B-tree designed to use modern processor cache efficiently. There are a number of places in the kernel that a non-overlapping range-based tree would be beneficial, especially one with a simple interface. If you use an rbtree with other data structures to improve performance or an interval tree to track non-overlapping ranges, then this is for you. The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf nodes. With the increased branching factor, it is significantly shorter than the rbtree so it has fewer cache misses. The removal of the linked list between subsequent entries also reduces the cache misses and the need to pull in the previous and next VMA during many tree alterations. The first user that is covered in this patch set is the vm_area_struct, where three data structures are replaced by the maple tree: the augmented rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The long term goal is to reduce or remove the mmap_lock contention. The plan is to get to the point where we use the maple tree in RCU mode. Readers will not block for writers. A single write operation will be allowed at a time. A reader re-walks if stale data is encountered. VMAs would be RCU enabled and this mode would be entered once multiple tasks are using the mm_struct. There is additional BUG_ON() calls added within the tree, most of which are in debug code. These will be replaced with a WARN_ON() call in the future. There is also additional BUG_ON() calls within the code which will also be reduced in number at a later date. These exist to catch things such as out-of-range accesses which would crash anyways. Link: https://lkml.kernel.org/r/20220906194824.2110408-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20220906194824.2110408-2-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Sven Schnelle <svens@linux.ibm.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11initramfs: mark my_inptr as __initdatawuchi1-1/+1
As my_inptr is only used in __init function unpack_to_rootfs(), mark it as __initdata to allow it be freed after boot. Link: https://lkml.kernel.org/r/20220827071116.83078-1-wuchi.zero@gmail.com Signed-off-by: wuchi <wuchi.zero@gmail.com> Reviewed-by: David Disseldorp <ddiss@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Martin Wilck <mwilck@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11init: move from strlcpy with unused retval to strscpyWolfram Sang2-4/+4
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220818210200.8203-1-wsa+renesas@sang-engineering.com Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-11page_ext: introduce boot parameter 'early_page_ext'Li Zhe1-1/+5
In commit 2f1ee0913ce5 ("Revert "mm: use early_pfn_to_nid in page_ext_init""), we call page_ext_init() after page_alloc_init_late() to avoid some panic problem. It seems that we cannot track early page allocations in current kernel even if page structure has been initialized early. This patch introduces a new boot parameter 'early_page_ext' to resolve this problem. If we pass it to the kernel, page_ext_init() will be moved up and the feature 'deferred initialization of struct pages' will be disabled to initialize the page allocator early and prevent the panic problem above. It can help us to catch early page allocations. This is useful especially when we find that the free memory value is not the same right after different kernel booting. [akpm@linux-foundation.org: fix section issue by removing __meminitdata] Link: https://lkml.kernel.org/r/20220825102714.669-1-lizhe.67@bytedance.com Signed-off-by: Li Zhe <lizhe.67@bytedance.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-07freezer,umh: Clean up freezer/initrd interactionPeter Zijlstra1-9/+1
handle_initrd() marks itself as PF_FREEZER_SKIP in order to ensure that the UMH, which is going to freeze the system, doesn't indefinitely wait for it's caller. Rework things by adding UMH_FREEZABLE to indicate the completion is freezable. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20220822114648.791019324@infradead.org
2022-09-05powerpc/64: Remove PPC64 special case for cputime accounting defaultNicholas Piggin1-2/+1
Distro kernels tend to be moving to VIRT_CPU_ACCOUNTING_GEN, and there is not much reason why PPC64 should be special here. Remove the special case and make the ppc64 and pseries defconfigs use GEN accounting (others will use TICK, as-per Kconfig defaults). VIRT_CPU_ACCOUNTING_NATIVE does provide scaled vtime and stolen time apportioned between system and user time, and vtime accounting is not unconditionally enabled, and possibly other things. But it would be better at this point to extend GEN to cover important missing features rather than directing users back to a less used option. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220902085316.2071519-4-npiggin@gmail.com
2022-08-26Merge tag 'arm64-fixes' of ↵Linus Torvalds1-3/+15
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A bumper crop of arm64 fixes for -rc3. The largest change is fixing our parsing of the 'rodata=full' command line option, which kstrtobool() started treating as 'rodata=false'. The fix actually makes the parsing of that option much less fragile and updates the documentation at the same time. We still have a boot issue pending when KASLR is disabled at compile time, but there's a fresh fix on the list which I'll send next week if it holds up to testing. Summary: - Fix workaround for Cortex-A76 erratum #1286807 - Add workaround for AMU erratum #2457168 on Cortex-A510 - Drop reference to removed CONFIG_ARCH_RANDOM #define - Fix parsing of the "rodata=full" cmdline option - Fix a bunch of issues in the SME register state switching and sigframe code - Fix incorrect extraction of the CTR_EL0.CWG register field - Fix ACPI cache topology probing when the PPTT is not present - Trivial comment and whitespace fixes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/sme: Don't flush SVE register state when handling SME traps arm64/sme: Don't flush SVE register state when allocating SME storage arm64/signal: Flush FPSIMD register state when disabling streaming mode arm64/signal: Raise limit on stack frames arm64/cache: Fix cache_type_cwg() for register generation arm64/sysreg: Guard SYS_FIELD_ macros for asm arm64/sysreg: Directly include bitfield.h arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned fw_level arm64: errata: add detection for AMEVCNTR01 incrementing incorrectly arm64: fix rodata=full arm64: Fix comment typo docs/arm64: elf_hwcaps: unify newlines in HWCAP lists arm64: adjust KASLR relocation after ARCH_RANDOM removal arm64: Fix match_list for erratum 1286807 on Arm Cortex-A76
2022-08-23arm64: fix rodata=fullMark Rutland1-3/+15
On arm64, "rodata=full" has been suppored (but not documented) since commit: c55191e96caa9d78 ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well") As it's necessary to determine the rodata configuration early during boot, arm64 has an early_param() handler for this, whereas init/main.c has a __setup() handler which is run later. Unfortunately, this split meant that since commit: f9a40b0890658330 ("init/main.c: return 1 from handled __setup() functions") ... passing "rodata=full" would result in a spurious warning from the __setup() handler (though RO permissions would be configured appropriately). Further, "rodata=full" has been broken since commit: 0d6ea3ac94ca77c5 ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()") ... which caused strtobool() to parse "full" as false (in addition to many other values not documented for the "rodata=" kernel parameter. This patch fixes this breakage by: * Moving the core parameter parser to an __early_param(), such that it is available early. * Adding an (optional) arch hook which arm64 can use to parse "full". * Updating the documentation to mention that "full" is valid for arm64. * Having the core parameter parser handle "on" and "off" explicitly, such that any undocumented values (e.g. typos such as "ful") are reported as errors rather than being silently accepted. Note that __setup() and early_param() have opposite conventions for their return values, where __setup() uses 1 to indicate a parameter was handled and early_param() uses 0 to indicate a parameter was handled. Fixes: f9a40b089065 ("init/main.c: return 1 from handled __setup() functions") Fixes: 0d6ea3ac94ca ("lib/kstrtox.c: add "false"/"true" support to kstrtobool()") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jagdish Gediya <jvgediya@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220817154022.3974645-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-21asm goto: eradicate CC_HAS_ASM_GOTONick Desaulniers1-4/+0
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0. The minimum supported versions of these tools for the build according to Documentation/process/changes.rst are 5.1 and 11.0.0 respectively. Remove the feature detection script, Kconfig option, and clean up some fallback code that is no longer supported. The removed script was also testing for a GCC specific bug that was fixed in the 4.7 release. Also remove workarounds for bpftrace using clang older than 9.0.0, since other BPF backend fixes are required at this point. Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/ Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637 Acked-by: Borislav Petkov <bp@suse.de> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-10Merge tag 'kbuild-v5.20' of ↵Linus Torvalds1-11/+5
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove the support for -O3 (CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3) - Fix error of rpm-pkg cross-builds - Support riscv for checkstack tool - Re-enable -Wformwat warnings for Clang - Clean up modpost, Makefiles, and misc scripts * tag 'kbuild-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) modpost: remove .symbol_white_list field entirely modpost: remove unneeded .symbol_white_list initializers modpost: add PATTERNS() helper macro modpost: shorten warning messages in report_sec_mismatch() Revert "Kbuild, lto, workaround: Don't warn for initcall_reference in modpost" modpost: use more reliable way to get fromsec in section_rel(a)() modpost: add array range check to sec_name() modpost: refactor get_secindex() kbuild: set EXIT trap before creating temporary directory modpost: remove unused Elf_Sword macro Makefile.extrawarn: re-enable -Wformat for clang kbuild: add dtbs_prepare target kconfig: Qt5: tell the user which packages are required modpost: use sym_get_data() to get module device_table data modpost: drop executable ELF support checkstack: add riscv support for scripts/checkstack.pl kconfig: shorten the temporary directory name for cc-option scripts: headers_install.sh: Update config leak ignore entries kbuild: error out if $(INSTALL_MOD_PATH) contains % or : kbuild: error out if $(KBUILD_EXTMOD) contains % or : ...
2022-08-08Merge tag 'modules-6.0-rc1' of ↵Linus Torvalds1-292/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "For the 6.0 merge window the modules code shifts to cleanup and minor fixes effort. This becomes much easier to do and review now due to the code split to its own directory from effort on the last kernel release. I expect to see more of this with time and as we expand on test coverage in the future. The cleanups and fixes come from usual suspects such as Christophe Leroy and Aaron Tomlin but there are also some other contributors. One particular minor fix worth mentioning is from Helge Deller, where he spotted a *forever* incorrect natural alignment on both ELF section header tables: * .altinstructions * __bug_table sections A lot of back and forth went on in trying to determine the ill effects of this misalignment being present for years and it has been determined there should be no real ill effects unless you have a buggy exception handler. Helge actually hit one of these buggy exception handlers on parisc which is how he ended up spotting this issue. When implemented correctly these paths with incorrect misalignment would just mean a performance penalty, but given that we are dealing with alternatives on modules and with the __bug_table (where info regardign BUG()/WARN() file/line information associated with it is stored) this really shouldn't be a big deal. The only other change with mentioning is the kmap() with kmap_local_page() and my only concern with that was on what is done after preemption, but the virtual addresses are restored after preemption. This is only used on module decompression. This all has sit on linux-next for a while except the kmap stuff which has been there for 3 weeks" * tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module: Replace kmap() with kmap_local_page() module: Show the last unloaded module's taint flag(s) module: Use strscpy() for last_unloaded_module module: Modify module_flags() to accept show_state argument module: Move module's Kconfig items in kernel/module/ MAINTAINERS: Update file list for module maintainers module: Use vzalloc() instead of vmalloc()/memset(0) modules: Ensure natural alignment for .altinstructions and __bug_table sections module: Increase readability of module_kallsyms_lookup_name() module: Fix ERRORs reported by checkpatch.pl module: Add support for default value for module async_probe
2022-08-07Merge tag 'mm-nonmm-stable-2022-08-06-2' of ↵Linus Torvalds1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ...
2022-08-03Merge tag 'cgroup-for-5.20' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Several core optimizations: - threadgroup_rwsem write locking is skipped when configuring controllers in empty subtrees. Combined with CLONE_INTO_CGROUP, this allows the common static usage pattern to not grab threadgroup_rwsem at all (glibc still doesn't seem ready for CLONE_INTO_CGROUP unfortunately). - threadgroup_rwsem used to be put into non-percpu mode by default due to latency concerns in specific use cases. There's no reason for everyone else to pay for it. Make the behavior optional. - psi no longer allocates memory when disabled. ... along with some code cleanups" * tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Skip subtree root in cgroup_update_dfl_csses() cgroup: remove "no" prefixed mount options cgroup: Make !percpu threadgroup_rwsem operations optional cgroup: Add "no" prefixed mount options cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree cgroup.c: remove redundant check for mixable cgroup in cgroup_migrate_vet_dst cgroup.c: add helper __cset_cgroup_from_root to cleanup duplicated codes psi: dont alloc memory for psi by default
2022-08-02Merge tag 'docs-6.0' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "This was a moderately busy cycle for documentation, but nothing all that earth-shaking: - More Chinese translations, and an update to the Italian translations. The Japanese, Korean, and traditional Chinese translations are more-or-less unmaintained at this point, instead. - Some build-system performance improvements. - The removal of the archaic submitting-drivers.rst document, with the movement of what useful material that remained into other docs. - Improvements to sphinx-pre-install to, hopefully, give more useful suggestions. - A number of build-warning fixes Plus the usual collection of typo fixes, updates, and more" * tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits) docs: efi-stub: Fix paths for x86 / arm stubs Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8 Docs/zh_CN: Update the translation of pci to 5.19-rc8 Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8 Docs/zh_CN: Update the translation of usage to 5.19-rc8 Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8 Docs/zh_CN: Update the translation of sparse to 5.19-rc8 Docs/zh_CN: Update the translation of kasan to 5.19-rc8 Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8 doc:it_IT: align Italian documentation docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst Documentation: process: Update email client instructions for Thunderbird docs: ABI: correct QEMU fw_cfg spec path doc/zh_CN: remove submitting-driver reference from docs docs: zh_TW: align to submitting-drivers removal docs: zh_CN: align to submitting-drivers removal docs: ko_KR: howto: remove reference to removed submitting-drivers docs: ja_JP: howto: remove reference to removed submitting-drivers docs: it_IT: align to submitting-drivers removal docs: process: remove outdated submitting-drivers.rst ...
2022-08-02Merge tag 'rcu.2022.07.26a' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ...
2022-08-02Merge tag 'v5.20-p1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Make proc files report fips module name and version Algorithms: - Move generic SHA1 code into lib/crypto - Implement Chinese Remainder Theorem for RSA - Remove blake2s - Add XCTR with x86/arm64 acceleration - Add POLYVAL with x86/arm64 acceleration - Add HCTR2 - Add ARIA Drivers: - Add support for new CCP/PSP device ID in ccp" * tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits) crypto: tcrypt - Remove the static variable initialisations to NULL crypto: arm64/poly1305 - fix a read out-of-bound crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps crypto: hisilicon/sec - fix auth key size error crypto: ccree - Remove a useless dma_supported() call crypto: ccp - Add support for new CCP/PSP device ID crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq crypto: testmgr - some more fixes to RSA test vectors cyrpto: powerpc/aes - delete the rebundant word "block" in comments hwrng: via - Fix comment typo crypto: twofish - Fix comment typo crypto: rmd160 - fix Kconfig "its" grammar crypto: keembay-ocs-ecc - Drop if with an always false condition Documentation: qat: rewrite description Documentation: qat: Use code block for qat sysfs example crypto: lib - add module license to libsha1 crypto: lib - make the sha1 library optional crypto: lib - move lib/sha1.c into lib/crypto/ crypto: fips - make proc files report fips module name and version ...
2022-07-27init/Kconfig: update KALLSYMS_ALL help textBaruch Siach1-4/+5
CONFIG_KALLSYMS_ALL is required for kernel live patching which is a common use case that is enabled in some major distros. Update the Kconfig help text to reflect that. While at it, s/e.g./i.e./ to match the text intention. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-07-27kbuild: drop support for CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3Nick Desaulniers1-7/+0
The difference in most compilers between `-O3` and `-O2` is mostly down to whether loops with statically determinable trip counts are fully unrolled vs unrolled to a multiple of SIMD width. This patch is effectively a revert of commit 15f5db60a137 ("kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC") without re-adding ARCH_CFLAGS Ever since commit cfdbc2e16e65 ("ARC: Build system: Makefiles, Kconfig, Linker script") ARC has been built with -O3, though the reason for doing so was not specified in inline comments or the commit message. This commit does not re-add -O3 to arch/arc/Makefile. Folks looking to experiment with `-O3` (or any compiler flag for that matter) may pass them along to the command line invocation of make: $ make KCFLAGS=-O3 Code that looks to re-add an explicit Kconfig option for `-O3` should provide: 1. A rigorous and reproducible performance profile of a reasonable userspace workload that demonstrates a hot loop in the kernel that would benefit from `-O3` over `-O2`. 2. Disassembly of said loop body before and after. 3. Provides stats on terms of increase in file size. Link: https://lore.kernel.org/linux-kbuild/CA+55aFz2sNBbZyg-_i8_Ldr2e8o9dfvdSfHHuRzVtP2VMAUWPg@mail.gmail.com/ Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-07-23cgroup: Make !percpu threadgroup_rwsem operations optionalTejun Heo1-0/+10
3942a9bd7b58 ("locking, rcu, cgroup: Avoid synchronize_sched() in __cgroup_procs_write()") disabled percpu operations on threadgroup_rwsem because the impiled synchronize_rcu() on write locking was pushing up the latencies too much for android which constantly moves processes between cgroups. This makes the hotter paths - fork and exit - slower as they're always forced into the slow path. There is no reason to force this on everyone especially given that more common static usage pattern can now completely avoid write-locking the rwsem. Write-locking is elided when turning on and off controllers on empty sub-trees and CLONE_INTO_CGROUP enables seeding a cgroup without grabbing the rwsem. Restore the default percpu operations and introduce the mount option "favordynmods" and config option CGROUP_FAVOR_DYNMODS for users who need lower latencies for the dynamic operations. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Michal Koutn� <mkoutny@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Oleg Nesterov <oleg@redhat.com>
2022-07-21Merge branch 'ctxt.2022.07.05a' into HEADPaul E. McKenney1-2/+2
ctxt.2022.07.05a: Linux-kernel memory model development branch.
2022-07-17init: add "hostname" kernel parameterDan Moulding1-0/+17
The gethostname system call returns the hostname for the current machine. However, the kernel has no mechanism to initially set the current machine's name in such a way as to guarantee that the first userspace process to call gethostname will receive a meaningful result. It relies on some unspecified userspace process to first call sethostname before gethostname can produce a meaningful name. Traditionally the machine's hostname is set from userspace by the init system. The init system, in turn, often relies on a configuration file (say, /etc/hostname) to provide the value that it will supply in the call to sethostname. Consequently, the file system containing /etc/hostname usually must be available before the hostname will be set. There may, however, be earlier userspace processes that could call gethostname before the file system containing /etc/hostname is mounted. Such a process will get some other, likely meaningless, name from gethostname (such as "(none)", "localhost", or "darkstar"). A real-world example where this can happen, and lead to undesirable results, is with mdadm. When assembling arrays, mdadm distinguishes between "local" arrays and "foreign" arrays. A local array is one that properly belongs to the current machine, and a foreign array is one that is (possibly temporarily) attached to the current machine, but properly belongs to some other machine. To determine if an array is local or foreign, mdadm may compare the "homehost" recorded on the array with the current hostname. If mdadm is run before the root file system is mounted, perhaps because the root file system itself resides on an md-raid array, then /etc/hostname isn't yet available and the init system will not yet have called sethostname, causing mdadm to incorrectly conclude that all of the local arrays are foreign. Solving this problem *could* be delegated to the init system. It could be left up to the init system (including any init system that starts within an initramfs, if one is in use) to ensure that sethostname is called before any other userspace process could possibly call gethostname. However, it may not always be obvious which processes could call gethostname (for example, udev itself might not call gethostname, but it could via udev rules invoke processes that do). Additionally, the init system has to ensure that the hostname configuration value is stored in some place where it will be readily accessible during early boot. Unfortunately, every init system will attempt to (or has already attempted to) solve this problem in a different, possibly incorrect, way. This makes getting consistently working configurations harder for users. I believe it is better for the kernel to provide the means by which the hostname may be set early, rather than making this a problem for the init system to solve. The option to set the hostname during early startup, via a kernel parameter, provides a simple, reliable way to solve this problem. It also could make system configuration easier for some embedded systems. [dmoulding@me.com: v2] Link: https://lkml.kernel.org/r/20220506060310.7495-2-dmoulding@me.com Link: https://lkml.kernel.org/r/20220505180651.22849-2-dmoulding@me.com Signed-off-by: Dan Moulding <dmoulding@me.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-15crypto: lib - make the sha1 library optionalEric Biggers1-0/+1
Since the Linux RNG no longer uses sha1_transform(), the SHA-1 library is no longer needed unconditionally. Make it possible to build the Linux kernel without the SHA-1 library by putting it behind a kconfig option, and selecting this new option from the kconfig options that gate the remaining users: CRYPTO_SHA1 for crypto/sha1_generic.c, BPF for kernel/bpf/core.c, and IPV6 for net/ipv6/addrconf.c. Unfortunately, since BPF is selected by NET, for now this can only make a difference for kernels built without networking support. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-12module: Move module's Kconfig items in kernel/module/Christophe Leroy1-292/+1
In init/Kconfig, the part dedicated to modules is quite large. Move it into a dedicated Kconfig in kernel/module/ MODULES_TREE_LOOKUP was outside of the 'if MODULES', but as it is only used when MODULES are set, move it in with everything else to avoid confusion. MODULE_SIG_FORMAT is left in init/Kconfig because this configuration item is not used in kernel/modules/ but in kernel/ and can be selected independently from CONFIG_MODULES. It is for instance selected from security/integrity/ima/Kconfig. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-07-07Documentation: update watch_queue.rst referencesMauro Carvalho Chehab1-1/+1
Changeset f5461124d59b ("Documentation: move watch_queue to core-api") renamed: Documentation/watch_queue.rst to: Documentation/core-api/watch_queue.rst. Update the cross-references accordingly. Fixes: f5461124d59b ("Documentation: move watch_queue to core-api") Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/1c220de9c58f35e815a3df9458ac2bea323c8bfb.1656234456.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-07-01stack: Declare {randomize_,}kstack_offset to fix Sparse warningsGONG, Ruiqi1-0/+1
Fix the following Sparse warnings that got noticed when the PPC-dev patchwork was checking another patch (see the link below): init/main.c:862:1: warning: symbol 'randomize_kstack_offset' was not declared. Should it be static? init/main.c:864:1: warning: symbol 'kstack_offset' was not declared. Should it be static? Which in fact are triggered on all architectures that have HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET support (for instances x86, arm64 etc). Link: https://lore.kernel.org/lkml/e7b0d68b-914d-7283-827c-101988923929@huawei.com/T/#m49b2d4490121445ce4bf7653500aba59eefcb67f Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Fixes: 39218ff4c625 ("stack: Optionally randomize kernel stack offset each syscall") Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220629060423.2515693-1-gongruiqi1@huawei.com
2022-06-29context_tracking: Split user tracking KconfigFrederic Weisbecker1-2/+2
Context tracking is going to be used not only to track user transitions but also idle/IRQs/NMIs. The user tracking part will then become a separate feature. Prepare Kconfig for that. [ frederic: Apply Max Filippov feedback. ] Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-06-20rcu-tasks: Add data structures for lightweight grace periodsPaul E. McKenney1-0/+1
This commit adds fields to task_struct and to rcu_tasks_percpu that will be used to avoid the task-list scan for RCU Tasks Trace grace periods, and also initializes these fields. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: KP Singh <kpsingh@kernel.org>
2022-06-09gcc-12: disable '-Warray-bounds' universally for nowLinus Torvalds1-0/+9
In commit 8b202ee21839 ("s390: disable -Warray-bounds") the s390 people disabled the '-Warray-bounds' warning for gcc-12, because the new logic in gcc would cause warnings for their use of the S390_lowcore macro, which accesses absolute pointers. It turns out gcc-12 has many other issues in this area, so this takes that s390 warning disable logic, and turns it into a kernel build config entry instead. Part of the intent is that we can make this all much more targeted, and use this conflig flag to disable it in only particular configurations that cause problems, with the s390 case as an example: select GCC12_NO_ARRAY_BOUNDS and we could do that for other configuration cases that cause issues. Or we could possibly use the CONFIG_CC_NO_ARRAY_BOUNDS thing in a more targeted way, and disable the warning only for particular uses: again the s390 case as an example: KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_CC_NO_ARRAY_BOUNDS),-Wno-array-bounds) but this ends up just doing it globally in the top-level Makefile, since the current issues are spread fairly widely all over: KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds We'll try to limit this later, since the gcc-12 problems are rare enough that *much* of the kernel can be built with it without disabling this warning. Cc: Kees Cook <keescook@chromium.org> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>