summaryrefslogtreecommitdiffstats
path: root/init
AgeCommit message (Collapse)AuthorFilesLines
2018-01-29Merge tag 'init_task-20180117' of ↵Linus Torvalds2-9/+163
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull init_task initializer cleanups from David Howells: "It doesn't seem useful to have the init_task in a header file rather than in a normal source file. We could consolidate init_task handling instead and expand out various macros. Here's a series of patches that consolidate init_task handling: (1) Make THREAD_SIZE available to vmlinux.lds for cris, hexagon and openrisc. (2) Alter the INIT_TASK_DATA linker script macro to set init_thread_union and init_stack rather than defining these in C. Insert init_task and init_thread_into into the init_stack area in the linker script as appropriate to the configuration, with different section markers so that they end up correctly ordered. We can then get merge ia64's init_task.c into the main one. We then have a bunch of single-use INIT_*() macros that seem only to be macros because they used to be used per-arch. We can then expand these in place of the user and get rid of a few lines and a lot of backslashes. (3) Expand INIT_TASK() in place. (4) Expand in place various small INIT_*() macros that are defined conditionally. Expand them and surround them by #if[n]def/#endif in the .c file as it takes fewer lines. (5) Expand INIT_SIGNALS() and INIT_SIGHAND() in place. (6) Expand INIT_STRUCT_PID in place. These macros can then be discarded" * tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: Expand INIT_STRUCT_PID and remove Expand the INIT_SIGNALS and INIT_SIGHAND macros and remove Expand various INIT_* macros and remove Expand INIT_TASK() in init/init_task.c and remove Construct init thread stack in the linker script rather than by union openrisc: Make THREAD_SIZE available to vmlinux.lds hexagon: Make THREAD_SIZE available to vmlinux.lds cris: Make THREAD_SIZE available to vmlinux.lds
2018-01-17Expand the INIT_SIGNALS and INIT_SIGHAND macros and removeDavid Howells1-2/+28
There doesn't seem to be any need to have the INIT_SIGNALS and INIT_SIGHAND macros, so expand them in their single places of use and remove them. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-17Expand various INIT_* macros and removeDavid Howells1-24/+71
Expand various INIT_* macros into the single places they're used in init/init_task.c and remove them. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-17Expand INIT_TASK() in init/init_task.c and removeDavid Howells1-2/+83
It's no longer necessary to have an INIT_TASK() macro, and this can be expanded into the one place it is now used and removed. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-12Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A Kconfig fix, a build fix and a membarrier bug fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: membarrier: Disable preemption when calling smp_call_function_many() sched/isolation: Make CONFIG_CPU_ISOLATION=y depend on SMP or COMPILE_TEST ia64, sched/cputime: Fix build error if CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
2018-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-0/+7
Daniel Borkmann says: ==================== pull-request: bpf 2018-01-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Prevent out-of-bounds speculation in BPF maps by masking the index after bounds checks in order to fix spectre v1, and add an option BPF_JIT_ALWAYS_ON into Kconfig that allows for removing the BPF interpreter from the kernel in favor of JIT-only mode to make spectre v2 harder, from Alexei. 2) Remove false sharing of map refcount with max_entries which was used in spectre v1, from Daniel. 3) Add a missing NULL psock check in sockmap in order to fix a race, from John. 4) Fix test_align BPF selftest case since a recent change in verifier rejects the bit-wise arithmetic on pointers earlier but test_align update was missing, from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-09Construct init thread stack in the linker script rather than by unionDavid Howells2-6/+6
Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-09bpf: introduce BPF_JIT_ALWAYS_ON configAlexei Starovoitov1-0/+7
The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-08sched/isolation: Make CONFIG_CPU_ISOLATION=y depend on SMP or COMPILE_TESTGeert Uytterhoeven1-0/+1
On uniprocessor systems, critical and non-critical tasks cannot be isolated, as there is only a single CPU core. Hence enabling CPU isolation by default on such systems does not make much sense. Instead of changing the default for !SMP, fix this by making the feature depend on SMP, with an override for compile-testing. Note that its sole selector (NO_HZ_FULL) already depends on SMP. This decreases kernel size for a default uniprocessor kernel by ca. 1 KiB. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 2c43838c99d9d23f ("sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default") Link: http://lkml.kernel.org/r/1514891590-20782-1-git-send-email-geert@linux-m68k.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-31Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Three patches addressing the fallout of the CPU_ISOLATION changes especially with NO_HZ_FULL plus documentation of boot parameter dependency" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/isolation: Document boot parameters dependency on CONFIG_CPU_ISOLATION=y sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default sched/isolation: Make CONFIG_NO_HZ_FULL select CONFIG_CPU_ISOLATION
2017-12-29Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 page table isolation updates from Thomas Gleixner: "This is the final set of enabling page table isolation on x86: - Infrastructure patches for handling the extra page tables. - Patches which map the various bits and pieces which are required to get in and out of user space into the user space visible page tables. - The required changes to have CR3 switching in the entry/exit code. - Optimizations for the CR3 switching along with documentation how the ASID/PCID mechanism works. - Updates to dump pagetables to cover the user space page tables for W+X scans and extra debugfs files to analyze both the kernel and the user space visible page tables The whole functionality is compile time controlled via a config switch and can be turned on/off on the command line as well" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) x86/ldt: Make the LDT mapping RO x86/mm/dump_pagetables: Allow dumping current pagetables x86/mm/dump_pagetables: Check user space page table for WX pages x86/mm/dump_pagetables: Add page table directory to the debugfs VFS hierarchy x86/mm/pti: Add Kconfig x86/dumpstack: Indicate in Oops whether PTI is configured and enabled x86/mm: Clarify the whole ASID/kernel PCID/user PCID naming x86/mm: Use INVPCID for __native_flush_tlb_single() x86/mm: Optimize RESTORE_CR3 x86/mm: Use/Fix PCID to optimize user/kernel switches x86/mm: Abstract switching CR3 x86/mm: Allow flushing for future ASID switches x86/pti: Map the vsyscall page if needed x86/pti: Put the LDT in its own PGD if PTI is on x86/mm/64: Make a full PGD-entry size hole in the memory map x86/events/intel/ds: Map debug buffers in cpu_entry_area x86/cpu_entry_area: Add debugstore entries to cpu_entry_area x86/mm/pti: Map ESPFIX into user space x86/mm/pti: Share entry text PMD x86/entry: Align entry text section to PMD boundary ...
2017-12-23x86/mm/pti: Add infrastructure for page table isolationThomas Gleixner1-0/+3
Add the initial files for kernel page table isolation, with a minimal init function and the boot time detection for this misfeature. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PTI preparatory patches from Thomas Gleixner: "Todays Advent calendar window contains twentyfour easy to digest patches. The original plan was to have twenty three matching the date, but a late fixup made that moot. - Move the cpu_entry_area mapping out of the fixmap into a separate address space. That's necessary because the fixmap becomes too big with NRCPUS=8192 and this caused already subtle and hard to diagnose failures. The top most patch is fresh from today and cures a brain slip of that tall grumpy german greybeard, who ignored the intricacies of 32bit wraparounds. - Limit the number of CPUs on 32bit to 64. That's insane big already, but at least it's small enough to prevent address space issues with the cpu_entry_area map, which have been observed and debugged with the fixmap code - A few TLB flush fixes in various places plus documentation which of the TLB functions should be used for what. - Rename the SYSENTER stack to CPU_ENTRY_AREA stack as it is used for more than sysenter now and keeping the name makes backtraces confusing. - Prevent LDT inheritance on exec() by moving it to arch_dup_mmap(), which is only invoked on fork(). - Make vysycall more robust. - A few fixes and cleanups of the debug_pagetables code. Check PAGE_PRESENT instead of checking the PTE for 0 and a cleanup of the C89 initialization of the address hint array which already was out of sync with the index enums. - Move the ESPFIX init to a different place to prepare for PTI. - Several code moves with no functional change to make PTI integration simpler and header files less convoluted. - Documentation fixes and clarifications" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/cpu_entry_area: Prevent wraparound in setup_cpu_entry_area_ptes() on 32bit init: Invoke init_espfix_bsp() from mm_init() x86/cpu_entry_area: Move it out of the fixmap x86/cpu_entry_area: Move it to a separate unit x86/mm: Create asm/invpcid.h x86/mm: Put MMU to hardware ASID translation in one place x86/mm: Remove hard-coded ASID limit checks x86/mm: Move the CR3 construction functions to tlbflush.h x86/mm: Add comments to clarify which TLB-flush functions are supposed to flush what x86/mm: Remove superfluous barriers x86/mm: Use __flush_tlb_one() for kernel memory x86/microcode: Dont abuse the TLB-flush interface x86/uv: Use the right TLB-flush API x86/entry: Rename SYSENTER_stack to CPU_ENTRY_AREA_entry_stack x86/doc: Remove obvious weirdnesses from the x86 MM layout documentation x86/mm/64: Improve the memory map documentation x86/ldt: Prevent LDT inheritance on exec x86/ldt: Rework locking arch, mm: Allow arch_dup_mmap() to fail x86/vsyscall/64: Warn and fail vsyscall emulation in NATIVE mode ...
2017-12-22init: Invoke init_espfix_bsp() from mm_init()Thomas Gleixner1-4/+2
init_espfix_bsp() needs to be invoked before the page table isolation initialization. Move it into mm_init() which is the place where pti_init() will be added. While at it get rid of the #ifdeffery and provide proper stub functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-18sched/isolation: Enable CONFIG_CPU_ISOLATION=y by defaultFrederic Weisbecker1-1/+5
The "isolcpus=" boot parameter support was always built-in before we moved the related code under CONFIG_CPU_ISOLATION. Having it disabled by default is very confusing for people accustomed to use this parameter. So enable it by dafault to keep the previous behaviour but keep it optable for those who want to tinify their kernels. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: kernel test robot <xiaolong.ye@intel.com> Link: http://lkml.kernel.org/r/1513275507-29200-3-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-27main: kernel_start: move housekeeping_init() before workqueue_init_early()Tal Shorer1-1/+6
This is needed in order to allow the unbound workqueue to take housekeeping cpus into accounty Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-17EXPERT Kconfig menu: fix broken EXPERT menuRandy Dunlap1-91/+93
Clean up the EXPERT menu (yet again). Move FHANDLE and CHECKPOINT_RESTORE into the primary EXPERT menu since they already depend on EXPERT. Move BPF_SYSCALL and USERFAULTFD out of the EXPERT Kconfig symbols menu list since they do not depend on EXPERT and were breaking the continuity of that menu list. Move all of the KALLSYMS Kconfig symbols to the end of the EXPERT menu. This separates the kernel services from the build options. This patch depends on [PATCH] pci: move PCI_QUIRKS to the PCI bus menu (https://lkml.org/lkml/2017/11/2/907). Link: http://lkml.kernel.org/r/72e4465a-a5ff-cb3c-1a90-11aa4861b161@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> [BPF] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17initramfs: use time64_t timestampsArnd Bergmann1-5/+5
The cpio format uses a 32-bit number to encode file timestamps, which breaks initramfs support in 2038. This reinterprets the timestamp as unsigned, to give us another 68 years and avoids breaking until 2106. Link: http://lkml.kernel.org/r/20171019095536.801199-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17pid: remove pidhashGargi Sharma1-1/+0
pidhash is no longer required as all the information can be looked up from idr tree. nr_hashed represented the number of pids that had been hashed. Since, nr_hashed and PIDNS_HASH_ADDING are no longer relevant, it has been renamed to pid_allocated and PIDNS_ADDING respectively. [gs051095@gmail.com: v6] Link: http://lkml.kernel.org/r/1507760379-21662-3-git-send-email-gs051095@gmail.com Link: http://lkml.kernel.org/r/1507583624-22146-3-git-send-email-gs051095@gmail.com Signed-off-by: Gargi Sharma <gs051095@gmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> [ia64] Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17pid: replace pid bitmap implementation with IDR APIGargi Sharma1-1/+1
Patch series "Replacing PID bitmap implementation with IDR API", v4. This series replaces kernel bitmap implementation of PID allocation with IDR API. These patches are written to simplify the kernel by replacing custom code with calls to generic code. The following are the stats for pid and pid_namespace object files before and after the replacement. There is a noteworthy change between the IDR and bitmap implementation. Before text data bss dec hex filename 8447 3894 64 12405 3075 kernel/pid.o After text data bss dec hex filename 3397 304 0 3701 e75 kernel/pid.o Before text data bss dec hex filename 5692 1842 192 7726 1e2e kernel/pid_namespace.o After text data bss dec hex filename 2854 216 16 3086 c0e kernel/pid_namespace.o The following are the stats for ps, pstree and calling readdir on /proc for 10,000 processes. ps: With IDR API With bitmap real 0m1.479s 0m2.319s user 0m0.070s 0m0.060s sys 0m0.289s 0m0.516s pstree: With IDR API With bitmap real 0m1.024s 0m1.794s user 0m0.348s 0m0.612s sys 0m0.184s 0m0.264s proc: With IDR API With bitmap real 0m0.059s 0m0.074s user 0m0.000s 0m0.004s sys 0m0.016s 0m0.016s This patch (of 2): Replace the current bitmap implementation for Process ID allocation. Functions that are no longer required, for example, free_pidmap(), alloc_pidmap(), etc. are removed. The rest of the functions are modified to use the IDR API. The change was made to make the PID allocation less complex by replacing custom code with calls to generic API. [gs051095@gmail.com: v6] Link: http://lkml.kernel.org/r/1507760379-21662-2-git-send-email-gs051095@gmail.com [avagin@openvz.org: restore the old behaviour of the ns_last_pid sysctl] Link: http://lkml.kernel.org/r/20171106183144.16368-1-avagin@openvz.org Link: http://lkml.kernel.org/r/1507583624-22146-2-git-send-email-gs051095@gmail.com Signed-off-by: Gargi Sharma <gs051095@gmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17init/version.c: include <linux/export.h> instead of <linux/module.h>Masahiro Yamada1-1/+1
init/version.c has nothing to do with modules, so remove the <linux/modude.h>. Instead, include <linux/export.h> for EXPORT_SYMBOL_GPL. This cuts off a lot of unnecessary header parsing. Link: http://lkml.kernel.org/r/1505920984-8523-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-9/+1
Merge updates from Andrew Morton: - a few misc bits - ocfs2 updates - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits) memory hotplug: fix comments when adding section mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP mm: simplify nodemask printing mm,oom_reaper: remove pointless kthread_run() error check mm/page_ext.c: check if page_ext is not prepared writeback: remove unused function parameter mm: do not rely on preempt_count in print_vma_addr mm, sparse: do not swamp log with huge vmemmap allocation failures mm/hmm: remove redundant variable align_end mm/list_lru.c: mark expected switch fall-through mm/shmem.c: mark expected switch fall-through mm/page_alloc.c: broken deferred calculation mm: don't warn about allocations which stall for too long fs: fuse: account fuse_inode slab memory as reclaimable mm, page_alloc: fix potential false positive in __zone_watermark_ok mm: mlock: remove lru_add_drain_all() mm, sysctl: make NUMA stats configurable shmem: convert shmem_init_inodecache() to void Unify migrate_pages and move_pages access checks mm, pagevec: rename pagevec drained field ...
2017-11-15kmemcheck: stop using GFP_NOTRACK and SLAB_NOTRACKLevin, Alexander (Sasha Levin)1-2/+1
Convert all allocations that used a NOTRACK flag to stop using it. Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Hansen <devtimhansen@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15kmemcheck: remove annotationsLevin, Alexander (Sasha Levin)1-1/+0
Patch series "kmemcheck: kill kmemcheck", v2. As discussed at LSF/MM, kill kmemcheck. KASan is a replacement that is able to work without the limitation of kmemcheck (single CPU, slow). KASan is already upstream. We are also not aware of any users of kmemcheck (or users who don't consider KASan as a suitable replacement). The only objection was that since KASAN wasn't supported by all GCC versions provided by distros at that time we should hold off for 2 years, and try again. Now that 2 years have passed, and all distros provide gcc that supports KASAN, kill kmemcheck again for the very same reasons. This patch (of 4): Remove kmemcheck annotations, and calls to kmemcheck from the kernel. [alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs] Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Hansen <devtimhansen@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm: slabinfo: remove CONFIG_SLABINFOYang Shi1-6/+0
According to discussion with Christoph (https://marc.info/?l=linux-kernel&m=150695909709711&w=2), it sounds like it is pointless to keep CONFIG_SLABINFO around. This patch removes the CONFIG_SLABINFO config option, but /proc/slabinfo is still available. [yang.s@alibaba-inc.com: v11] Link: http://lkml.kernel.org/r/1507656303-103845-3-git-send-email-yang.s@alibaba-inc.com Link: http://lkml.kernel.org/r/1507152550-46205-3-git-send-email-yang.s@alibaba-inc.com Signed-off-by: Yang Shi <yang.s@alibaba-inc.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds1-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual rocket-science from trivial tree for 4.15" * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: MAINTAINERS: relinquish kconfig MAINTAINERS: Update my email address treewide: Fix typos in Kconfig kfifo: Fix comments init/Kconfig: Fix module signing document location misc: ibmasm: Return error on error path HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback" MAINTAINERS: Correct path to uDraw PS3 driver tracing: Fix doc mistakes in trace sample tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig mm/huge_memory.c: fixup grammar in comment lib/xz: Add fall-through comments to a switch statement
2017-11-13Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 APIC updates from Thomas Gleixner: "This update provides a major overhaul of the APIC initialization and vector allocation code: - Unification of the APIC and interrupt mode setup which was scattered all over the place and was hard to follow. This also distangles the timer setup from the APIC initialization which brings a clear separation of functionality. Great detective work from Dou Lyiang! - Refactoring of the x86 vector allocation mechanism. The existing code was based on nested loops and rather convoluted APIC callbacks which had a horrible worst case behaviour and tried to serve all different use cases in one go. This led to quite odd hacks when supporting the new managed interupt facility for multiqueue devices and made it more or less impossible to deal with the vector space exhaustion which was a major roadblock for server hibernation. Aside of that the code dealing with cpu hotplug and the system vectors was disconnected from the actual vector management and allocation code, which made it hard to follow and maintain. Utilizing the new bitmap matrix allocator core mechanism, the new allocator and management code consolidates the handling of system vectors, legacy vectors, cpu hotplug mechanisms and the actual allocation which needs to be aware of system and legacy vectors and hotplug constraints into a single consistent entity. This has one visible change: The support for multi CPU targets of interrupts, which is only available on a certain subset of CPUs/APIC variants has been removed in favour of single interrupt targets. A proper analysis of the multi CPU target feature revealed that there is no real advantage as the vast majority of interrupts end up on the CPU with the lowest APIC id in the set of target CPUs anyway. That change was agreed on by the relevant folks and allowed to simplify the implementation significantly and to replace rather fragile constructs like the vector cleanup IPI with straight forward and solid code. Furthermore this allowed to cleanly separate the allocation details for legacy, normal and managed interrupts: * Legacy interrupts are not longer wasting 16 vectors unconditionally * Managed interrupts have now a guaranteed vector reservation, but the actual vector assignment happens when the interrupt is requested. It's guaranteed not to fail. * Normal interrupts no longer allocate vectors unconditionally when the interrupt is set up (IO/APIC init or MSI(X) enable). The mechanism has been switched to a best effort reservation mode. The actual allocation happens when the interrupt is requested. Contrary to managed interrupts the request can fail due to vector space exhaustion, but drivers must handle a fail of request_irq() anyway. When the interrupt is freed, the vector is handed back as well. This solves a long standing problem with large unconditional vector allocations for a certain class of enterprise devices which prevented server hibernation due to vector space exhaustion when the unused allocated vectors had to be migrated to CPU0 while unplugging all non boot CPUs. The code has been equipped with trace points and detailed debugfs information to aid analysis of the vector space" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) x86/vector/msi: Select CONFIG_GENERIC_IRQ_RESERVATION_MODE PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core code genirq: Add config option for reservation mode x86/vector: Use correct per cpu variable in free_moved_vector() x86/apic/vector: Ignore set_affinity call for inactive interrupts x86/apic: Fix spelling mistake: "symmectic" -> "symmetric" x86/apic: Use dead_cpu instead of current CPU when cleaning up ACPI/init: Invoke early ACPI initialization earlier x86/vector: Respect affinity mask in irq descriptor x86/irq: Simplify hotplug vector accounting x86/vector: Switch IOAPIC to global reservation mode x86/vector/msi: Switch to global reservation mode x86/vector: Handle managed interrupts proper x86/io_apic: Reevaluate vector configuration on activate() iommu/amd: Reevaluate vector configuration on activate() iommu/vt-d: Reevaluate vector configuration on activate() x86/apic/msi: Force reactivation of interrupts at startup time x86/vector: Untangle internal state from irq_cfg x86/vector: Compile SMP only code conditionally x86/apic: Remove unused callbacks ...
2017-11-08Merge branch 'linus' into sched/core, to pick up fixesIngo Molnar9-1/+9
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07PCI: Move PCI_QUIRKS to the PCI bus menuRandy Dunlap1-9/+0
Localize PCI_QUIRKS in the PCI bus menu. Move PCI_QUIRKS to the PCI bus menu instead of the (often broken) General Setup EXPERT menu. The prompt still depends on EXPERT. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-07Merge branch 'linus' into x86/apic, to resolve conflictsIngo Molnar9-1/+9
Conflicts: arch/x86/include/asm/x2apic.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds8-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman8-0/+8
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27sched/isolation: Handle the nohz_full= parameterFrederic Weisbecker1-1/+0
We want to centralize the isolation management, done by the housekeeping subsystem. Therefore we need to handle the nohz_full= parameter from there. Since nohz_full= so far has involved unbound timers, watchdog, RCU and tilegx NAPI isolation, we keep that default behaviour. nohz_full= will be deprecated in the future. We want to control the isolation features from the isolcpus= parameter. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1509072159-31808-10-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-27sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from ↵Frederic Weisbecker1-0/+8
CONFIG_NO_HZ_FULL Split the housekeeping config from CONFIG_NO_HZ_FULL. This way we finally separate the isolation code from NOHZ. Although a dependency to CONFIG_NO_HZ_FULL remains for now, while the housekeeping code still deals with NOHZ internals. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1509072159-31808-8-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-27sched/isolation: Move housekeeping related code to its own fileFrederic Weisbecker1-0/+2
The housekeeping code is currently tied to the NOHZ code. As we are planning to make housekeeping independent from it, start with moving the relevant code to its own file. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Link: http://lkml.kernel.org/r/1509072159-31808-2-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-12init/Kconfig: Fix module signing document locationNathan Chancellor1-1/+1
This was moved in commit 94e980cc45f2 ("Documentation/module-signing.txt: convert to ReST markup") and was missed by commit 8c27ceff3604 ("docs: fix locations of several documents that got moved"). Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-07kbuild: Fix optimization level choice defaultUlf Magnusson1-1/+1
The choice containing the CC_OPTIMIZE_FOR_PERFORMANCE symbol accidentally added a "CONFIG_" prefix when trying to make it the default, selecting an undefined symbol as the default. The mistake is harmless here: Since the default symbol is not visible, the choice falls back on using the visible symbol as the default instead, which is CC_OPTIMIZE_FOR_PERFORMANCE, as intended. A patch that makes Kconfig print a warning in this case has been submitted separately: http://www.spinics.net/lists/linux-kbuild/msg15566.html Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-27ACPI/init: Invoke early ACPI initialization earlierDou Liyang1-1/+1
acpi_early_init() unmaps the temporary ACPI Table mappings which are used in the early startup code and prepares for permanent table mappings. Before the consolidation of the x86 APIC setup code the invocation of acpi_early_init() happened before the interrupt remapping unit was initialized. With the rework the remapping unit initialization moved in front of acpi_early_init() which causes an ACPI warning when the ACPI root tables get reallocated afterwards. Invoke acpi_early_init() before late_time_init() which is before the access to the DMAR tables happens. Fixes: 935356cecda8 ("x86/apic: Initialize interrupt mode after timer init") Reported-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-ia64@vger.kernel.org Cc: bhe@redhat.com Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-acpi@vger.kernel.org Cc: bp@alien8.de Cc: Lv" <lv.zheng@intel.com> Cc: yinghai@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lkml.kernel.org/r/1505294274-441-1-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14Merge branch 'work.ipc' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ipc compat cleanup and 64-bit time_t from Al Viro: "IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa Dinamani" * 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: utimes: Make utimes y2038 safe ipc: shm: Make shmid_kernel timestamps y2038 safe ipc: sem: Make sem_array timestamps y2038 safe ipc: msg: Make msg_queue timestamps y2038 safe ipc: mqueue: Replace timespec with timespec64 ipc: Make sys_semtimedop() y2038 safe get rid of SYSVIPC_COMPAT on ia64 semtimedop(): move compat to native shmat(2): move compat to native msgrcv(2), msgsnd(2): move compat to native ipc(2): move compat to native ipc: make use of compat ipc_perm helpers semctl(): move compat to native semctl(): separate all layout-dependent copyin/copyout msgctl(): move compat to native msgctl(): split the actual work from copyin/copyout ipc: move compat shmctl to native shmctl: split the work from copyin/copyout
2017-09-08init/main.c: extract early boot entropy from the passed cmdlineDaniel Micay1-0/+2
Feed the boot command-line as to the /dev/random entropy pool Existing Android bootloaders usually pass data which may not be known by an external attacker on the kernel command-line. It may also be the case on other embedded systems. Sample command-line from a Google Pixel running CopperheadOS.... console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=sailfish user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff buildvariant=user veritykeyid=id:dfcb9db0089e5b3b4090a592415c28e1cb4545ab androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=yellow androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=FA6CE0305299 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd:1:none:cfg:single_dsi androidboot.slot_suffix=_b fpsimd.fpsimd_settings=0 app_setting.use_app_setting=0 kernelflag=0x00000000 debugflag=0x00000000 androidboot.hardware.revision=PVT radioflag=0x00000000 radioflagex1=0x00000000 radioflagex2=0x00000000 cpumask=0x00000000 androidboot.hardware.ddr=4096MB,Hynix,LPDDR4 androidboot.ddrinfo=00000006 androidboot.ddrsize=4GB androidboot.hardware.color=GRA00 androidboot.hardware.ufs=32GB,Samsung androidboot.msm.hw_ver_id=268824801 androidboot.qf.st=2 androidboot.cid=11111111 androidboot.mid=G-2PW4100 androidboot.bootloader=8996-012001-1704121145 androidboot.oem_unlock_support=1 androidboot.fp_src=1 androidboot.htc.hrdump=detected androidboot.ramdump.opt=mem@2g:2g,mem@4g:2g androidboot.bootreason=reboot androidboot.ramdump_enable=0 ro root=/dev/dm-0 dm="system none ro,0 1 android-verity /dev/sda34" rootwait skip_initramfs init=/init androidboot.wificountrycode=US androidboot.boottime=1BLL:85,1BLE:669,2BLL:0,2BLE:1777,SW:6,KL:8136 Among other things, it contains a value unique to the device (androidboot.serialno=FA6CE0305299), unique to the OS builds for the device variant (veritykeyid=id:dfcb9db0089e5b3b4090a592415c28e1cb4545ab) and timings from the bootloader stages in milliseconds (androidboot.boottime=1BLL:85,1BLE:669,2BLL:0,2BLE:1777,SW:6,KL:8136). [tytso@mit.edu: changelog tweak] [labbott@redhat.com: line-wrapped command line] Link: http://lkml.kernel.org/r/20170816231458.2299-3-labbott@redhat.com Signed-off-by: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Nick Kralevich <nnk@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08init: move stack canary initialization after setup_archLaura Abbott1-6/+5
Patch series "Command line randomness", v3. A series to add the kernel command line as a source of randomness. This patch (of 2): Stack canary intialization involves getting a random number. Getting this random number may involve accessing caches or other architectural specific features which are not available until after the architecture is setup. Move the stack canary initialization later to accommodate this. Link: http://lkml.kernel.org/r/20170816231458.2299-2-labbott@redhat.com Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Nick Kralevich <nnk@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06Merge branch 'for-4.14' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu updates from Tejun Heo: "A lot of changes for percpu this time around. percpu inherited the same area allocator from the original pre-virtual-address-mapped implementation. This was from the time when percpu allocator wasn't used all that much and the implementation was focused on simplicity, with the unfortunate computational complexity of O(number of areas allocated from the chunk) per alloc / free. With the increase in percpu usage, we're hitting cases where the lack of scalability is hurting. The most prominent one right now is bpf perpcu map creation / destruction which may allocate and free a lot of entries consecutively and it's likely that the problem will become more prominent in the future. To address the issue, Dennis replaced the area allocator with hinted bitmap allocator which is more consistent. While the new allocator does perform a bit worse in some cases, it outperforms the old allocator way more than an order of magnitude in other more common scenarios while staying mostly flat in CPU overhead and completely flat in memory consumption" * 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (27 commits) percpu: update header to contain bitmap allocator explanation. percpu: update pcpu_find_block_fit to use an iterator percpu: use metadata blocks to update the chunk contig hint percpu: update free path to take advantage of contig hints percpu: update alloc path to only scan if contig hints are broken percpu: keep track of the best offset for contig hints percpu: skip chunks if the alloc does not fit in the contig hint percpu: add first_bit to keep track of the first free in the bitmap percpu: introduce bitmap metadata blocks percpu: replace area map allocator with bitmap percpu: generalize bitmap (un)populated iterators percpu: increase minimum percpu allocation size and align first regions percpu: introduce nr_empty_pop_pages to help empty page accounting percpu: change the number of pages marked in the first_chunk pop bitmap percpu: combine percpu address checks percpu: modify base_addr to be region specific percpu: setup_first_chunk rename schunk/dchunk to chunk percpu: end chunk area maps page aligned for the populated bitmap percpu: unify allocation of schunk and dchunk percpu: setup_first_chunk remove dyn_size and consolidate logic ...
2017-09-06mm, memory_hotplug: drop zone from build_all_zonelistsMichal Hocko1-1/+1
build_all_zonelists gets a zone parameter to initialize zone's pagesets. There is only a single user which gives a non-NULL zone parameter and that one doesn't really need the rest of the build_all_zonelists (see commit 6dcd73d7011b ("memory-hotplug: allocate zone's pcp before onlining pages")). Therefore remove setup_zone_pageset from build_all_zonelists and call it from its only user directly. This will also remove a pointless zonlists rebuilding which is always good. Link: http://lkml.kernel.org/r/20170721143915.14161-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06mm: add SLUB free list pointer obfuscationKees Cook1-0/+9
This SLUB free list pointer obfuscation code is modified from Brad Spengler/PaX Team's code in the last public patch of grsecurity/PaX based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. This adds a per-cache random value to SLUB caches that is XORed with their freelist pointer address and value. This adds nearly zero overhead and frustrates the very common heap overflow exploitation method of overwriting freelist pointers. A recent example of the attack is written up here: http://cyseclabs.com/blog/cve-2016-6187-heap-off-by-one-exploit and there is a section dedicated to the technique the book "A Guide to Kernel Exploitation: Attacking the Core". This is based on patches by Daniel Micay, and refactored to minimize the use of #ifdef. With 200-count cycles of "hackbench -g 20 -l 1000" I saw the following run times: before: mean 10.11882499999999999995 variance .03320378329145728642 stdev .18221905304181911048 after: mean 10.12654000000000000014 variance .04700556623115577889 stdev .21680767106160192064 The difference gets lost in the noise, but if the above is to be taken literally, using CONFIG_FREELIST_HARDENED is 0.07% slower. Link: http://lkml.kernel.org/r/20170802180609.GA66807@beast Signed-off-by: Kees Cook <keescook@chromium.org> Suggested-by: Daniel Micay <danielmicay@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tycho Andersen <tycho@docker.com> Cc: Alexander Popov <alex.popov@linux.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-04Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm changes from Ingo Molnar: "PCID support, 5-level paging support, Secure Memory Encryption support The main changes in this cycle are support for three new, complex hardware features of x86 CPUs: - Add 5-level paging support, which is a new hardware feature on upcoming Intel CPUs allowing up to 128 PB of virtual address space and 4 PB of physical RAM space - a 512-fold increase over the old limits. (Supercomputers of the future forecasting hurricanes on an ever warming planet can certainly make good use of more RAM.) Many of the necessary changes went upstream in previous cycles, v4.14 is the first kernel that can enable 5-level paging. This feature is activated via CONFIG_X86_5LEVEL=y - disabled by default. (By Kirill A. Shutemov) - Add 'encrypted memory' support, which is a new hardware feature on upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system RAM to be encrypted and decrypted (mostly) transparently by the CPU, with a little help from the kernel to transition to/from encrypted RAM. Such RAM should be more secure against various attacks like RAM access via the memory bus and should make the radio signature of memory bus traffic harder to intercept (and decrypt) as well. This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled by default. (By Tom Lendacky) - Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a hardware feature that attaches an address space tag to TLB entries and thus allows to skip TLB flushing in many cases, even if we switch mm's. (By Andy Lutomirski) All three of these features were in the works for a long time, and it's coincidence of the three independent development paths that they are all enabled in v4.14 at once" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits) x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y) x86/mm: Use pr_cont() in dump_pagetable() x86/mm: Fix SME encryption stack ptr handling kvm/x86: Avoid clearing the C-bit in rsvd_bits() x86/CPU: Align CR3 defines x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages acpi, x86/mm: Remove encryption mask from ACPI page protection type x86/mm, kexec: Fix memory corruption with SME on successive kexecs x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y x86/mm: Allow userspace have mappings above 47-bit x86/mm: Prepare to expose larger address space to userspace x86/mpx: Do not allow MPX if we have mappings above 47-bit x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit() x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD x86/mm/dump_pagetables: Fix printout of p4d level x86/mm/dump_pagetables: Generalize address normalization x86/boot: Fix memremap() related build failure ...
2017-09-04Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: - Add 'cross-release' support to lockdep, which allows APIs like completions, where it's not the 'owner' who releases the lock, to be tracked. It's all activated automatically under CONFIG_PROVE_LOCKING=y. - Clean up (restructure) the x86 atomics op implementation to be more readable, in preparation of KASAN annotations. (Dmitry Vyukov) - Fix static keys (Paolo Bonzini) - Add killable versions of down_read() et al (Kirill Tkhai) - Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini) - Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra) - Remove smp_mb__before_spinlock() and convert its usages, introduce smp_mb__after_spinlock() (Peter Zijlstra) * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits) locking/lockdep/selftests: Fix mixed read-write ABBA tests sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK() acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures smp: Avoid using two cache lines for struct call_single_data locking/lockdep: Untangle xhlock history save/restore from task independence locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being futex: Remove duplicated code and fix undefined behaviour Documentation/locking/atomic: Finish the document... locking/lockdep: Fix workqueue crossrelease annotation workqueue/lockdep: 'Fix' flush_work() annotation locking/lockdep/selftests: Add mixed read-write ABBA tests mm, locking/barriers: Clarify tlb_flush_pending() barriers locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive locking/lockdep: Explicitly initialize wq_barrier::done::map locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING locking/refcounts, x86/asm: Implement fast refcount overflow protection locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease ...
2017-09-04Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - fix affine wakeups (Peter Zijlstra) - improve CPU onlining (and general bootup) scalability on systems with ridiculous number (thousands) of CPUs (Peter Zijlstra) - sched/numa updates (Rik van Riel) - sched/deadline updates (Byungchul Park) - sched/cpufreq enhancements and related cleanups (Viresh Kumar) - sched/debug enhancements (Xie XiuQi) - various fixes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) sched/debug: Optimize sched_domain sysctl generation sched/topology: Avoid pointless rebuild sched/topology, cpuset: Avoid spurious/wrong domain rebuilds sched/topology: Improve comments sched/topology: Fix memory leak in __sdt_alloc() sched/completion: Document that reinit_completion() must be called after complete_all() sched/autogroup: Fix error reporting printk text in autogroup_create() sched/fair: Fix wake_affine() for !NUMA_BALANCING sched/debug: Intruduce task_state_to_char() helper function sched/debug: Show task state in /proc/sched_debug sched/debug: Use task_pid_nr_ns in /proc/$pid/sched sched/core: Remove unnecessary initialization init_idle_bootup_task() sched/deadline: Change return value of cpudl_find() sched/deadline: Make find_later_rq() choose a closer CPU in topology sched/numa: Scale scan period with tasks in group and shared/private sched/numa: Slow down scan rate if shared faults dominate sched/pelt: Fix false running accounting sched: Mark pick_next_task_dl() and build_sched_domain() as static sched/cpupri: Don't re-initialize 'struct cpupri' sched/deadline: Don't re-initialize 'struct cpudl' ...
2017-09-03utimes: Make utimes y2038 safeDeepa Dinamani1-1/+1
struct timespec is not y2038 safe on 32 bit machines. Replace timespec with y2038 safe struct timespec64. Note that the patch only changes the internals without modifying the syscall interfaces. This will be part of a separate series. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>