| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Three patches addressing the fallout of the CPU_ISOLATION changes
especially with NO_HZ_FULL plus documentation of boot parameter
dependency"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Document boot parameters dependency on CONFIG_CPU_ISOLATION=y
sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default
sched/isolation: Make CONFIG_NO_HZ_FULL select CONFIG_CPU_ISOLATION
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 page table isolation updates from Thomas Gleixner:
"This is the final set of enabling page table isolation on x86:
- Infrastructure patches for handling the extra page tables.
- Patches which map the various bits and pieces which are required to
get in and out of user space into the user space visible page
tables.
- The required changes to have CR3 switching in the entry/exit code.
- Optimizations for the CR3 switching along with documentation how
the ASID/PCID mechanism works.
- Updates to dump pagetables to cover the user space page tables for
W+X scans and extra debugfs files to analyze both the kernel and
the user space visible page tables
The whole functionality is compile time controlled via a config switch
and can be turned on/off on the command line as well"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/ldt: Make the LDT mapping RO
x86/mm/dump_pagetables: Allow dumping current pagetables
x86/mm/dump_pagetables: Check user space page table for WX pages
x86/mm/dump_pagetables: Add page table directory to the debugfs VFS hierarchy
x86/mm/pti: Add Kconfig
x86/dumpstack: Indicate in Oops whether PTI is configured and enabled
x86/mm: Clarify the whole ASID/kernel PCID/user PCID naming
x86/mm: Use INVPCID for __native_flush_tlb_single()
x86/mm: Optimize RESTORE_CR3
x86/mm: Use/Fix PCID to optimize user/kernel switches
x86/mm: Abstract switching CR3
x86/mm: Allow flushing for future ASID switches
x86/pti: Map the vsyscall page if needed
x86/pti: Put the LDT in its own PGD if PTI is on
x86/mm/64: Make a full PGD-entry size hole in the memory map
x86/events/intel/ds: Map debug buffers in cpu_entry_area
x86/cpu_entry_area: Add debugstore entries to cpu_entry_area
x86/mm/pti: Map ESPFIX into user space
x86/mm/pti: Share entry text PMD
x86/entry: Align entry text section to PMD boundary
...
|
|
Add the initial files for kernel page table isolation, with a minimal init
function and the boot time detection for this misfeature.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PTI preparatory patches from Thomas Gleixner:
"Todays Advent calendar window contains twentyfour easy to digest
patches. The original plan was to have twenty three matching the date,
but a late fixup made that moot.
- Move the cpu_entry_area mapping out of the fixmap into a separate
address space. That's necessary because the fixmap becomes too big
with NRCPUS=8192 and this caused already subtle and hard to
diagnose failures.
The top most patch is fresh from today and cures a brain slip of
that tall grumpy german greybeard, who ignored the intricacies of
32bit wraparounds.
- Limit the number of CPUs on 32bit to 64. That's insane big already,
but at least it's small enough to prevent address space issues with
the cpu_entry_area map, which have been observed and debugged with
the fixmap code
- A few TLB flush fixes in various places plus documentation which of
the TLB functions should be used for what.
- Rename the SYSENTER stack to CPU_ENTRY_AREA stack as it is used for
more than sysenter now and keeping the name makes backtraces
confusing.
- Prevent LDT inheritance on exec() by moving it to arch_dup_mmap(),
which is only invoked on fork().
- Make vysycall more robust.
- A few fixes and cleanups of the debug_pagetables code. Check
PAGE_PRESENT instead of checking the PTE for 0 and a cleanup of the
C89 initialization of the address hint array which already was out
of sync with the index enums.
- Move the ESPFIX init to a different place to prepare for PTI.
- Several code moves with no functional change to make PTI
integration simpler and header files less convoluted.
- Documentation fixes and clarifications"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/cpu_entry_area: Prevent wraparound in setup_cpu_entry_area_ptes() on 32bit
init: Invoke init_espfix_bsp() from mm_init()
x86/cpu_entry_area: Move it out of the fixmap
x86/cpu_entry_area: Move it to a separate unit
x86/mm: Create asm/invpcid.h
x86/mm: Put MMU to hardware ASID translation in one place
x86/mm: Remove hard-coded ASID limit checks
x86/mm: Move the CR3 construction functions to tlbflush.h
x86/mm: Add comments to clarify which TLB-flush functions are supposed to flush what
x86/mm: Remove superfluous barriers
x86/mm: Use __flush_tlb_one() for kernel memory
x86/microcode: Dont abuse the TLB-flush interface
x86/uv: Use the right TLB-flush API
x86/entry: Rename SYSENTER_stack to CPU_ENTRY_AREA_entry_stack
x86/doc: Remove obvious weirdnesses from the x86 MM layout documentation
x86/mm/64: Improve the memory map documentation
x86/ldt: Prevent LDT inheritance on exec
x86/ldt: Rework locking
arch, mm: Allow arch_dup_mmap() to fail
x86/vsyscall/64: Warn and fail vsyscall emulation in NATIVE mode
...
|
|
init_espfix_bsp() needs to be invoked before the page table isolation
initialization. Move it into mm_init() which is the place where pti_init()
will be added.
While at it get rid of the #ifdeffery and provide proper stub functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The "isolcpus=" boot parameter support was always built-in before we
moved the related code under CONFIG_CPU_ISOLATION. Having it disabled by
default is very confusing for people accustomed to use this parameter.
So enable it by dafault to keep the previous behaviour but keep it
optable for those who want to tinify their kernels.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: kernel test robot <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/1513275507-29200-3-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This is needed in order to allow the unbound workqueue to take
housekeeping cpus into accounty
Signed-off-by: Tal Shorer <tal.shorer@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Clean up the EXPERT menu (yet again).
Move FHANDLE and CHECKPOINT_RESTORE into the primary EXPERT menu since
they already depend on EXPERT.
Move BPF_SYSCALL and USERFAULTFD out of the EXPERT Kconfig symbols menu
list since they do not depend on EXPERT and were breaking the continuity
of that menu list.
Move all of the KALLSYMS Kconfig symbols to the end of the EXPERT menu.
This separates the kernel services from the build options.
This patch depends on [PATCH] pci: move PCI_QUIRKS to the PCI bus menu
(https://lkml.org/lkml/2017/11/2/907).
Link: http://lkml.kernel.org/r/72e4465a-a5ff-cb3c-1a90-11aa4861b161@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net> [BPF]
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The cpio format uses a 32-bit number to encode file timestamps, which
breaks initramfs support in 2038. This reinterprets the timestamp as
unsigned, to give us another 68 years and avoids breaking until 2106.
Link: http://lkml.kernel.org/r/20171019095536.801199-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pidhash is no longer required as all the information can be looked up
from idr tree. nr_hashed represented the number of pids that had been
hashed. Since, nr_hashed and PIDNS_HASH_ADDING are no longer relevant,
it has been renamed to pid_allocated and PIDNS_ADDING respectively.
[gs051095@gmail.com: v6]
Link: http://lkml.kernel.org/r/1507760379-21662-3-git-send-email-gs051095@gmail.com
Link: http://lkml.kernel.org/r/1507583624-22146-3-git-send-email-gs051095@gmail.com
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Replacing PID bitmap implementation with IDR API", v4.
This series replaces kernel bitmap implementation of PID allocation with
IDR API. These patches are written to simplify the kernel by replacing
custom code with calls to generic code.
The following are the stats for pid and pid_namespace object files
before and after the replacement. There is a noteworthy change between
the IDR and bitmap implementation.
Before
text data bss dec hex filename
8447 3894 64 12405 3075 kernel/pid.o
After
text data bss dec hex filename
3397 304 0 3701 e75 kernel/pid.o
Before
text data bss dec hex filename
5692 1842 192 7726 1e2e kernel/pid_namespace.o
After
text data bss dec hex filename
2854 216 16 3086 c0e kernel/pid_namespace.o
The following are the stats for ps, pstree and calling readdir on /proc
for 10,000 processes.
ps:
With IDR API With bitmap
real 0m1.479s 0m2.319s
user 0m0.070s 0m0.060s
sys 0m0.289s 0m0.516s
pstree:
With IDR API With bitmap
real 0m1.024s 0m1.794s
user 0m0.348s 0m0.612s
sys 0m0.184s 0m0.264s
proc:
With IDR API With bitmap
real 0m0.059s 0m0.074s
user 0m0.000s 0m0.004s
sys 0m0.016s 0m0.016s
This patch (of 2):
Replace the current bitmap implementation for Process ID allocation.
Functions that are no longer required, for example, free_pidmap(),
alloc_pidmap(), etc. are removed. The rest of the functions are
modified to use the IDR API. The change was made to make the PID
allocation less complex by replacing custom code with calls to generic
API.
[gs051095@gmail.com: v6]
Link: http://lkml.kernel.org/r/1507760379-21662-2-git-send-email-gs051095@gmail.com
[avagin@openvz.org: restore the old behaviour of the ns_last_pid sysctl]
Link: http://lkml.kernel.org/r/20171106183144.16368-1-avagin@openvz.org
Link: http://lkml.kernel.org/r/1507583624-22146-2-git-send-email-gs051095@gmail.com
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
init/version.c has nothing to do with modules, so remove the
<linux/modude.h>.
Instead, include <linux/export.h> for EXPORT_SYMBOL_GPL.
This cuts off a lot of unnecessary header parsing.
Link: http://lkml.kernel.org/r/1505920984-8523-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge updates from Andrew Morton:
- a few misc bits
- ocfs2 updates
- almost all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits)
memory hotplug: fix comments when adding section
mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP
mm: simplify nodemask printing
mm,oom_reaper: remove pointless kthread_run() error check
mm/page_ext.c: check if page_ext is not prepared
writeback: remove unused function parameter
mm: do not rely on preempt_count in print_vma_addr
mm, sparse: do not swamp log with huge vmemmap allocation failures
mm/hmm: remove redundant variable align_end
mm/list_lru.c: mark expected switch fall-through
mm/shmem.c: mark expected switch fall-through
mm/page_alloc.c: broken deferred calculation
mm: don't warn about allocations which stall for too long
fs: fuse: account fuse_inode slab memory as reclaimable
mm, page_alloc: fix potential false positive in __zone_watermark_ok
mm: mlock: remove lru_add_drain_all()
mm, sysctl: make NUMA stats configurable
shmem: convert shmem_init_inodecache() to void
Unify migrate_pages and move_pages access checks
mm, pagevec: rename pagevec drained field
...
|
|
Convert all allocations that used a NOTRACK flag to stop using it.
Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "kmemcheck: kill kmemcheck", v2.
As discussed at LSF/MM, kill kmemcheck.
KASan is a replacement that is able to work without the limitation of
kmemcheck (single CPU, slow). KASan is already upstream.
We are also not aware of any users of kmemcheck (or users who don't
consider KASan as a suitable replacement).
The only objection was that since KASAN wasn't supported by all GCC
versions provided by distros at that time we should hold off for 2
years, and try again.
Now that 2 years have passed, and all distros provide gcc that supports
KASAN, kill kmemcheck again for the very same reasons.
This patch (of 4):
Remove kmemcheck annotations, and calls to kmemcheck from the kernel.
[alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs]
Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com
Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
According to discussion with Christoph
(https://marc.info/?l=linux-kernel&m=150695909709711&w=2), it sounds like
it is pointless to keep CONFIG_SLABINFO around.
This patch removes the CONFIG_SLABINFO config option, but /proc/slabinfo
is still available.
[yang.s@alibaba-inc.com: v11]
Link: http://lkml.kernel.org/r/1507656303-103845-3-git-send-email-yang.s@alibaba-inc.com
Link: http://lkml.kernel.org/r/1507152550-46205-3-git-send-email-yang.s@alibaba-inc.com
Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- detach driver before tearing down procfs/sysfs (Alex Williamson)
- disable PCIe services during shutdown (Sinan Kaya)
- fix ASPM oops on systems with no Root Ports (Ard Biesheuvel)
- fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas)
- fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas)
- fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn
Helgaas)
- report non-fatal AER errors only to the affected endpoint (Gabriele
Paoloni)
- distribute bus numbers, MMIO, and I/O space among hotplug bridges to
allow more devices to be hot-added (Mika Westerberg)
- fix pciehp races during initialization and surprise link down (Mika
Westerberg)
- handle surprise-removed devices in PME handling (Qiang)
- support resizable BARs for large graphics devices (Christian König)
- expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo
Sironi)
- create SR-IOV virtfn/physfn sysfs links before attaching driver
(Stuart Hayes)
- fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen)
- enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy)
- avoid slot reset if bridge itself is broken (Jan Glauber)
- clean up pci_reset_function() path (Jan H. Schönherr)
- make pci_map_rom() fail if the option ROM is invalid (Changbin Du)
- convert timers to timer_setup() (Kees Cook)
- move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap)
- constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal)
- remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master()
declarations (Bjorn Helgaas)
- fix endpoint framework overflows and BUG()s (Dan Carpenter)
- fix endpoint framework issues (Kishon Vijay Abraham I)
- avoid broken Cavium CN8xxx bus reset behavior (David Daney)
- extend Cavium ACS capability quirks (Vadim Lomovtsev)
- support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel)
- turn off dra7xx clocks cleanly on shutdown (Keerthy)
- fix Faraday probe error path (Wei Yongjun)
- support HiSilicon STB SoC PCIe host controller (Jianguo Sun)
- fix Hyper-V interrupt affinity issue (Dexuan Cui)
- remove useless ACPI warning for Hyper-V pass-through devices (Vitaly
Kuznetsov)
- support multiple MSI on iProc (Sandor Bodo-Merle)
- support Layerscape LS1012a and LS1046a PCIe host controllers (Hou
Zhiqiang)
- fix Layerscape default error response (Minghuan Lian)
- support MSI on Tango host controller (Marc Gonzalez)
- support Tegra186 PCIe host controller (Manikanta Maddireddy)
- use generic accessors on Tegra when possible (Thierry Reding)
- support V3 Semiconductor PCI host controller (Linus Walleij)
* tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits)
PCI/ASPM: Add L1 Substates definitions
PCI/ASPM: Reformat ASPM register definitions
PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD
PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time
PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe()
PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up()
PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up()
PCI: Fix kernel-doc build warning
PCI: Fail pci_map_rom() if the option ROM is invalid
PCI: Move pci_map_rom() error path
PCI: Move PCI_QUIRKS to the PCI bus menu
alpha/PCI: Make pdev_save_srm_config() static
PCI: Remove unused declarations
PCI: Remove redundant pci_dev, pci_bus, resource declarations
PCI: Remove redundant pcibios_set_master() declarations
PCI/PME: Handle invalid data when reading Root Status
PCI: hv: Use effective affinity mask
PCI: pciehp: Do not clear Presence Detect Changed during initialization
PCI: pciehp: Fix race condition handling surprise link down
PCI: Distribute available resources to hotplug-capable bridges
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"The usual rocket-science from trivial tree for 4.15"
* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
MAINTAINERS: relinquish kconfig
MAINTAINERS: Update my email address
treewide: Fix typos in Kconfig
kfifo: Fix comments
init/Kconfig: Fix module signing document location
misc: ibmasm: Return error on error path
HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback"
MAINTAINERS: Correct path to uDraw PS3 driver
tracing: Fix doc mistakes in trace sample
tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER
MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig
mm/huge_memory.c: fixup grammar in comment
lib/xz: Add fall-through comments to a switch statement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
"This update provides a major overhaul of the APIC initialization and
vector allocation code:
- Unification of the APIC and interrupt mode setup which was
scattered all over the place and was hard to follow. This also
distangles the timer setup from the APIC initialization which
brings a clear separation of functionality.
Great detective work from Dou Lyiang!
- Refactoring of the x86 vector allocation mechanism. The existing
code was based on nested loops and rather convoluted APIC callbacks
which had a horrible worst case behaviour and tried to serve all
different use cases in one go. This led to quite odd hacks when
supporting the new managed interupt facility for multiqueue devices
and made it more or less impossible to deal with the vector space
exhaustion which was a major roadblock for server hibernation.
Aside of that the code dealing with cpu hotplug and the system
vectors was disconnected from the actual vector management and
allocation code, which made it hard to follow and maintain.
Utilizing the new bitmap matrix allocator core mechanism, the new
allocator and management code consolidates the handling of system
vectors, legacy vectors, cpu hotplug mechanisms and the actual
allocation which needs to be aware of system and legacy vectors and
hotplug constraints into a single consistent entity.
This has one visible change: The support for multi CPU targets of
interrupts, which is only available on a certain subset of
CPUs/APIC variants has been removed in favour of single interrupt
targets. A proper analysis of the multi CPU target feature revealed
that there is no real advantage as the vast majority of interrupts
end up on the CPU with the lowest APIC id in the set of target CPUs
anyway. That change was agreed on by the relevant folks and allowed
to simplify the implementation significantly and to replace rather
fragile constructs like the vector cleanup IPI with straight
forward and solid code.
Furthermore this allowed to cleanly separate the allocation details
for legacy, normal and managed interrupts:
* Legacy interrupts are not longer wasting 16 vectors
unconditionally
* Managed interrupts have now a guaranteed vector reservation, but
the actual vector assignment happens when the interrupt is
requested. It's guaranteed not to fail.
* Normal interrupts no longer allocate vectors unconditionally
when the interrupt is set up (IO/APIC init or MSI(X) enable).
The mechanism has been switched to a best effort reservation
mode. The actual allocation happens when the interrupt is
requested. Contrary to managed interrupts the request can fail
due to vector space exhaustion, but drivers must handle a fail
of request_irq() anyway. When the interrupt is freed, the vector
is handed back as well.
This solves a long standing problem with large unconditional
vector allocations for a certain class of enterprise devices
which prevented server hibernation due to vector space
exhaustion when the unused allocated vectors had to be migrated
to CPU0 while unplugging all non boot CPUs.
The code has been equipped with trace points and detailed debugfs
information to aid analysis of the vector space"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/vector/msi: Select CONFIG_GENERIC_IRQ_RESERVATION_MODE
PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core code
genirq: Add config option for reservation mode
x86/vector: Use correct per cpu variable in free_moved_vector()
x86/apic/vector: Ignore set_affinity call for inactive interrupts
x86/apic: Fix spelling mistake: "symmectic" -> "symmetric"
x86/apic: Use dead_cpu instead of current CPU when cleaning up
ACPI/init: Invoke early ACPI initialization earlier
x86/vector: Respect affinity mask in irq descriptor
x86/irq: Simplify hotplug vector accounting
x86/vector: Switch IOAPIC to global reservation mode
x86/vector/msi: Switch to global reservation mode
x86/vector: Handle managed interrupts proper
x86/io_apic: Reevaluate vector configuration on activate()
iommu/amd: Reevaluate vector configuration on activate()
iommu/vt-d: Reevaluate vector configuration on activate()
x86/apic/msi: Force reactivation of interrupts at startup time
x86/vector: Untangle internal state from irq_cfg
x86/vector: Compile SMP only code conditionally
x86/apic: Remove unused callbacks
...
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Localize PCI_QUIRKS in the PCI bus menu.
Move PCI_QUIRKS to the PCI bus menu instead of the (often broken) General
Setup EXPERT menu. The prompt still depends on EXPERT.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Conflicts:
arch/x86/include/asm/x2apic.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want to centralize the isolation management, done by the housekeeping
subsystem. Therefore we need to handle the nohz_full= parameter from
there.
Since nohz_full= so far has involved unbound timers, watchdog, RCU
and tilegx NAPI isolation, we keep that default behaviour.
nohz_full= will be deprecated in the future. We want to control
the isolation features from the isolcpus= parameter.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-10-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
CONFIG_NO_HZ_FULL
Split the housekeeping config from CONFIG_NO_HZ_FULL. This way we finally
separate the isolation code from NOHZ.
Although a dependency to CONFIG_NO_HZ_FULL remains for now, while the
housekeeping code still deals with NOHZ internals.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-8-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The housekeeping code is currently tied to the NOHZ code. As we are
planning to make housekeeping independent from it, start with moving
the relevant code to its own file.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-2-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This was moved in commit 94e980cc45f2 ("Documentation/module-signing.txt:
convert to ReST markup") and was missed by commit 8c27ceff3604 ("docs:
fix locations of several documents that got moved").
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The choice containing the CC_OPTIMIZE_FOR_PERFORMANCE symbol
accidentally added a "CONFIG_" prefix when trying to make it the
default, selecting an undefined symbol as the default.
The mistake is harmless here: Since the default symbol is not visible,
the choice falls back on using the visible symbol as the default
instead, which is CC_OPTIMIZE_FOR_PERFORMANCE, as intended.
A patch that makes Kconfig print a warning in this case has been
submitted separately:
http://www.spinics.net/lists/linux-kbuild/msg15566.html
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
acpi_early_init() unmaps the temporary ACPI Table mappings which are used
in the early startup code and prepares for permanent table mappings.
Before the consolidation of the x86 APIC setup code the invocation of
acpi_early_init() happened before the interrupt remapping unit was
initialized. With the rework the remapping unit initialization moved in
front of acpi_early_init() which causes an ACPI warning when the ACPI root
tables get reallocated afterwards.
Invoke acpi_early_init() before late_time_init() which is before the access
to the DMAR tables happens.
Fixes: 935356cecda8 ("x86/apic: Initialize interrupt mode after timer init")
Reported-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Cc: bhe@redhat.com
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: bp@alien8.de
Cc: Lv" <lv.zheng@intel.com>
Cc: yinghai@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/1505294274-441-1-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ipc compat cleanup and 64-bit time_t from Al Viro:
"IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa
Dinamani"
* 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
utimes: Make utimes y2038 safe
ipc: shm: Make shmid_kernel timestamps y2038 safe
ipc: sem: Make sem_array timestamps y2038 safe
ipc: msg: Make msg_queue timestamps y2038 safe
ipc: mqueue: Replace timespec with timespec64
ipc: Make sys_semtimedop() y2038 safe
get rid of SYSVIPC_COMPAT on ia64
semtimedop(): move compat to native
shmat(2): move compat to native
msgrcv(2), msgsnd(2): move compat to native
ipc(2): move compat to native
ipc: make use of compat ipc_perm helpers
semctl(): move compat to native
semctl(): separate all layout-dependent copyin/copyout
msgctl(): move compat to native
msgctl(): split the actual work from copyin/copyout
ipc: move compat shmctl to native
shmctl: split the work from copyin/copyout
|
|
Feed the boot command-line as to the /dev/random entropy pool
Existing Android bootloaders usually pass data which may not be known by
an external attacker on the kernel command-line. It may also be the
case on other embedded systems. Sample command-line from a Google Pixel
running CopperheadOS....
console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0
androidboot.hardware=sailfish user_debug=31 ehci-hcd.park=3
lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff buildvariant=user
veritykeyid=id:dfcb9db0089e5b3b4090a592415c28e1cb4545ab
androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=yellow
androidboot.veritymode=enforcing androidboot.keymaster=1
androidboot.serialno=FA6CE0305299 androidboot.baseband=msm
mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd:1:none:cfg:single_dsi
androidboot.slot_suffix=_b fpsimd.fpsimd_settings=0
app_setting.use_app_setting=0 kernelflag=0x00000000 debugflag=0x00000000
androidboot.hardware.revision=PVT radioflag=0x00000000
radioflagex1=0x00000000 radioflagex2=0x00000000 cpumask=0x00000000
androidboot.hardware.ddr=4096MB,Hynix,LPDDR4 androidboot.ddrinfo=00000006
androidboot.ddrsize=4GB androidboot.hardware.color=GRA00
androidboot.hardware.ufs=32GB,Samsung androidboot.msm.hw_ver_id=268824801
androidboot.qf.st=2 androidboot.cid=11111111 androidboot.mid=G-2PW4100
androidboot.bootloader=8996-012001-1704121145
androidboot.oem_unlock_support=1 androidboot.fp_src=1
androidboot.htc.hrdump=detected androidboot.ramdump.opt=mem@2g:2g,mem@4g:2g
androidboot.bootreason=reboot androidboot.ramdump_enable=0 ro
root=/dev/dm-0 dm="system none ro,0 1 android-verity /dev/sda34"
rootwait skip_initramfs init=/init androidboot.wificountrycode=US
androidboot.boottime=1BLL:85,1BLE:669,2BLL:0,2BLE:1777,SW:6,KL:8136
Among other things, it contains a value unique to the device
(androidboot.serialno=FA6CE0305299), unique to the OS builds for the
device variant (veritykeyid=id:dfcb9db0089e5b3b4090a592415c28e1cb4545ab)
and timings from the bootloader stages in milliseconds
(androidboot.boottime=1BLL:85,1BLE:669,2BLL:0,2BLE:1777,SW:6,KL:8136).
[tytso@mit.edu: changelog tweak]
[labbott@redhat.com: line-wrapped command line]
Link: http://lkml.kernel.org/r/20170816231458.2299-3-labbott@redhat.com
Signed-off-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Nick Kralevich <nnk@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Command line randomness", v3.
A series to add the kernel command line as a source of randomness.
This patch (of 2):
Stack canary intialization involves getting a random number. Getting this
random number may involve accessing caches or other architectural specific
features which are not available until after the architecture is setup.
Move the stack canary initialization later to accommodate this.
Link: http://lkml.kernel.org/r/20170816231458.2299-2-labbott@redhat.com
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Nick Kralevich <nnk@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
"A lot of changes for percpu this time around. percpu inherited the
same area allocator from the original pre-virtual-address-mapped
implementation. This was from the time when percpu allocator wasn't
used all that much and the implementation was focused on simplicity,
with the unfortunate computational complexity of O(number of areas
allocated from the chunk) per alloc / free.
With the increase in percpu usage, we're hitting cases where the lack
of scalability is hurting. The most prominent one right now is bpf
perpcu map creation / destruction which may allocate and free a lot of
entries consecutively and it's likely that the problem will become
more prominent in the future.
To address the issue, Dennis replaced the area allocator with hinted
bitmap allocator which is more consistent. While the new allocator
does perform a bit worse in some cases, it outperforms the old
allocator way more than an order of magnitude in other more common
scenarios while staying mostly flat in CPU overhead and completely
flat in memory consumption"
* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (27 commits)
percpu: update header to contain bitmap allocator explanation.
percpu: update pcpu_find_block_fit to use an iterator
percpu: use metadata blocks to update the chunk contig hint
percpu: update free path to take advantage of contig hints
percpu: update alloc path to only scan if contig hints are broken
percpu: keep track of the best offset for contig hints
percpu: skip chunks if the alloc does not fit in the contig hint
percpu: add first_bit to keep track of the first free in the bitmap
percpu: introduce bitmap metadata blocks
percpu: replace area map allocator with bitmap
percpu: generalize bitmap (un)populated iterators
percpu: increase minimum percpu allocation size and align first regions
percpu: introduce nr_empty_pop_pages to help empty page accounting
percpu: change the number of pages marked in the first_chunk pop bitmap
percpu: combine percpu address checks
percpu: modify base_addr to be region specific
percpu: setup_first_chunk rename schunk/dchunk to chunk
percpu: end chunk area maps page aligned for the populated bitmap
percpu: unify allocation of schunk and dchunk
percpu: setup_first_chunk remove dyn_size and consolidate logic
...
|
|
build_all_zonelists gets a zone parameter to initialize zone's pagesets.
There is only a single user which gives a non-NULL zone parameter and
that one doesn't really need the rest of the build_all_zonelists (see
commit 6dcd73d7011b ("memory-hotplug: allocate zone's pcp before
onlining pages")).
Therefore remove setup_zone_pageset from build_all_zonelists and call it
from its only user directly. This will also remove a pointless zonlists
rebuilding which is always good.
Link: http://lkml.kernel.org/r/20170721143915.14161-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This SLUB free list pointer obfuscation code is modified from Brad
Spengler/PaX Team's code in the last public patch of grsecurity/PaX
based on my understanding of the code. Changes or omissions from the
original code are mine and don't reflect the original grsecurity/PaX
code.
This adds a per-cache random value to SLUB caches that is XORed with
their freelist pointer address and value. This adds nearly zero
overhead and frustrates the very common heap overflow exploitation
method of overwriting freelist pointers.
A recent example of the attack is written up here:
http://cyseclabs.com/blog/cve-2016-6187-heap-off-by-one-exploit
and there is a section dedicated to the technique the book "A Guide to
Kernel Exploitation: Attacking the Core".
This is based on patches by Daniel Micay, and refactored to minimize the
use of #ifdef.
With 200-count cycles of "hackbench -g 20 -l 1000" I saw the following
run times:
before:
mean 10.11882499999999999995
variance .03320378329145728642
stdev .18221905304181911048
after:
mean 10.12654000000000000014
variance .04700556623115577889
stdev .21680767106160192064
The difference gets lost in the noise, but if the above is to be taken
literally, using CONFIG_FREELIST_HARDENED is 0.07% slower.
Link: http://lkml.kernel.org/r/20170802180609.GA66807@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tycho Andersen <tycho@docker.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm changes from Ingo Molnar:
"PCID support, 5-level paging support, Secure Memory Encryption support
The main changes in this cycle are support for three new, complex
hardware features of x86 CPUs:
- Add 5-level paging support, which is a new hardware feature on
upcoming Intel CPUs allowing up to 128 PB of virtual address space
and 4 PB of physical RAM space - a 512-fold increase over the old
limits. (Supercomputers of the future forecasting hurricanes on an
ever warming planet can certainly make good use of more RAM.)
Many of the necessary changes went upstream in previous cycles,
v4.14 is the first kernel that can enable 5-level paging.
This feature is activated via CONFIG_X86_5LEVEL=y - disabled by
default.
(By Kirill A. Shutemov)
- Add 'encrypted memory' support, which is a new hardware feature on
upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system
RAM to be encrypted and decrypted (mostly) transparently by the
CPU, with a little help from the kernel to transition to/from
encrypted RAM. Such RAM should be more secure against various
attacks like RAM access via the memory bus and should make the
radio signature of memory bus traffic harder to intercept (and
decrypt) as well.
This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled
by default.
(By Tom Lendacky)
- Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a
hardware feature that attaches an address space tag to TLB entries
and thus allows to skip TLB flushing in many cases, even if we
switch mm's.
(By Andy Lutomirski)
All three of these features were in the works for a long time, and
it's coincidence of the three independent development paths that they
are all enabled in v4.14 at once"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits)
x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y)
x86/mm: Use pr_cont() in dump_pagetable()
x86/mm: Fix SME encryption stack ptr handling
kvm/x86: Avoid clearing the C-bit in rsvd_bits()
x86/CPU: Align CR3 defines
x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages
acpi, x86/mm: Remove encryption mask from ACPI page protection type
x86/mm, kexec: Fix memory corruption with SME on successive kexecs
x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt
x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y
x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID
x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y
x86/mm: Allow userspace have mappings above 47-bit
x86/mm: Prepare to expose larger address space to userspace
x86/mpx: Do not allow MPX if we have mappings above 47-bit
x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit()
x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD
x86/mm/dump_pagetables: Fix printout of p4d level
x86/mm/dump_pagetables: Generalize address normalization
x86/boot: Fix memremap() related build failure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Add 'cross-release' support to lockdep, which allows APIs like
completions, where it's not the 'owner' who releases the lock, to be
tracked. It's all activated automatically under
CONFIG_PROVE_LOCKING=y.
- Clean up (restructure) the x86 atomics op implementation to be more
readable, in preparation of KASAN annotations. (Dmitry Vyukov)
- Fix static keys (Paolo Bonzini)
- Add killable versions of down_read() et al (Kirill Tkhai)
- Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini)
- Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra)
- Remove smp_mb__before_spinlock() and convert its usages, introduce
smp_mb__after_spinlock() (Peter Zijlstra)
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
locking/lockdep/selftests: Fix mixed read-write ABBA tests
sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse
locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures
smp: Avoid using two cache lines for struct call_single_data
locking/lockdep: Untangle xhlock history save/restore from task independence
locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being
futex: Remove duplicated code and fix undefined behaviour
Documentation/locking/atomic: Finish the document...
locking/lockdep: Fix workqueue crossrelease annotation
workqueue/lockdep: 'Fix' flush_work() annotation
locking/lockdep/selftests: Add mixed read-write ABBA tests
mm, locking/barriers: Clarify tlb_flush_pending() barriers
locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive
locking/lockdep: Explicitly initialize wq_barrier::done::map
locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS
locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config
locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING
locking/refcounts, x86/asm: Implement fast refcount overflow protection
locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- fix affine wakeups (Peter Zijlstra)
- improve CPU onlining (and general bootup) scalability on systems
with ridiculous number (thousands) of CPUs (Peter Zijlstra)
- sched/numa updates (Rik van Riel)
- sched/deadline updates (Byungchul Park)
- sched/cpufreq enhancements and related cleanups (Viresh Kumar)
- sched/debug enhancements (Xie XiuQi)
- various fixes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
sched/debug: Optimize sched_domain sysctl generation
sched/topology: Avoid pointless rebuild
sched/topology, cpuset: Avoid spurious/wrong domain rebuilds
sched/topology: Improve comments
sched/topology: Fix memory leak in __sdt_alloc()
sched/completion: Document that reinit_completion() must be called after complete_all()
sched/autogroup: Fix error reporting printk text in autogroup_create()
sched/fair: Fix wake_affine() for !NUMA_BALANCING
sched/debug: Intruduce task_state_to_char() helper function
sched/debug: Show task state in /proc/sched_debug
sched/debug: Use task_pid_nr_ns in /proc/$pid/sched
sched/core: Remove unnecessary initialization init_idle_bootup_task()
sched/deadline: Change return value of cpudl_find()
sched/deadline: Make find_later_rq() choose a closer CPU in topology
sched/numa: Scale scan period with tasks in group and shared/private
sched/numa: Slow down scan rate if shared faults dominate
sched/pelt: Fix false running accounting
sched: Mark pick_next_task_dl() and build_sched_domain() as static
sched/cpupri: Don't re-initialize 'struct cpupri'
sched/deadline: Don't re-initialize 'struct cpudl'
...
|
|
struct timespec is not y2038 safe on 32 bit machines.
Replace timespec with y2038 safe struct timespec64.
Note that the patch only changes the internals without
modifying the syscall interfaces. This will be part
of a separate series.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The allocated debug objects are either on the free list or in the
hashed bucket lists. So they won't get lost. However if both debug
objects and kmemleak are enabled and kmemleak scanning is done
while some of the debug objects are transitioning from one list to
the others, false negative reporting of memory leaks may happen for
those objects. For example,
[38687.275678] kmemleak: 12 new suspected memory leaks (see
/sys/kernel/debug/kmemleak)
unreferenced object 0xffff92e98aabeb68 (size 40):
comm "ksmtuned", pid 4344, jiffies 4298403600 (age 906.430s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 d0 bc db 92 e9 92 ff ff ................
01 00 00 00 00 00 00 00 38 36 8a 61 e9 92 ff ff ........86.a....
backtrace:
[<ffffffff8fa5378a>] kmemleak_alloc+0x4a/0xa0
[<ffffffff8f47c019>] kmem_cache_alloc+0xe9/0x320
[<ffffffff8f62ed96>] __debug_object_init+0x3e6/0x400
[<ffffffff8f62ef01>] debug_object_activate+0x131/0x210
[<ffffffff8f330d9f>] __call_rcu+0x3f/0x400
[<ffffffff8f33117d>] call_rcu_sched+0x1d/0x20
[<ffffffff8f4a183c>] put_object+0x2c/0x40
[<ffffffff8f4a188c>] __delete_object+0x3c/0x50
[<ffffffff8f4a18bd>] delete_object_full+0x1d/0x20
[<ffffffff8fa535c2>] kmemleak_free+0x32/0x80
[<ffffffff8f47af07>] kmem_cache_free+0x77/0x350
[<ffffffff8f453912>] unlink_anon_vmas+0x82/0x1e0
[<ffffffff8f440341>] free_pgtables+0xa1/0x110
[<ffffffff8f44af91>] exit_mmap+0xc1/0x170
[<ffffffff8f29db60>] mmput+0x80/0x150
[<ffffffff8f2a7609>] do_exit+0x2a9/0xd20
The references in the debug objects may also hide a real memory leak.
As there is no point in having kmemleak to track debug object
allocations, kmemleak checking is now disabled for debug objects.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1502718733-8527-1-git-send-email-longman@redhat.com
|
|
init_idle_bootup_task( ) is called in rest_init( ) to switch
the scheduling class of the boot thread to the idle class.
the function only sets:
idle->sched_class = &idle_sched_class;
which has been set in init_idle() called by sched_init():
/*
* The idle tasks have their own, simple scheduling class:
*/
idle->sched_class = &idle_sched_class;
We've already set the boot thread to idle class in
start_kernel()->sched_init()->init_idle()
so it's unnecessary to set it again in
start_kernel()->rest_init()->init_idle_bootup_task()
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <akpm@linux-foundation.org>
Cc: <huawei.libin@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1501838377-109720-1-git-send-email-cj.chengjian@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This makes it possible to preserve basic futex support and compile out the
PI support when RT mutexes are not available.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708010024190.5981@knanqh.ubzr
|
|
The percpu memory allocator is experiencing scalability issues when
allocating and freeing large numbers of counters as in BPF.
Additionally, there is a corner case where iteration is triggered over
all chunks if the contig_hint is the right size, but wrong alignment.
This patch replaces the area map allocator with a basic bitmap allocator
implementation. Each subsequent patch will introduce new features and
replace full scanning functions with faster non-scanning options when
possible.
Implementation:
This patchset removes the area map allocator in favor of a bitmap
allocator backed by metadata blocks. The primary goal is to provide
consistency in performance and memory footprint with a focus on small
allocations (< 64 bytes). The bitmap removes the heavy memmove from the
freeing critical path and provides a consistent memory footprint. The
metadata blocks provide a bound on the amount of scanning required by
maintaining a set of hints.
In an effort to make freeing fast, the metadata is updated on the free
path if the new free area makes a page free, a block free, or spans
across blocks. This causes the chunk's contig hint to potentially be
smaller than what it could allocate by up to the smaller of a page or a
block. If the chunk's contig hint is contained within a block, a check
occurs and the hint is kept accurate. Metadata is always kept accurate
on allocation, so there will not be a situation where a chunk has a
later contig hint than available.
Evaluation:
I have primarily done testing against a simple workload of allocation of
1 million objects (2^20) of varying size. Deallocation was done by in
order, alternating, and in reverse. These numbers were collected after
rebasing ontop of a80099a152. I present the worst-case numbers here:
Area Map Allocator:
Object Size | Alloc Time (ms) | Free Time (ms)
----------------------------------------------
4B | 310 | 4770
16B | 557 | 1325
64B | 436 | 273
256B | 776 | 131
1024B | 3280 | 122
Bitmap Allocator:
Object Size | Alloc Time (ms) | Free Time (ms)
----------------------------------------------
4B | 490 | 70
16B | 515 | 75
64B | 610 | 80
256B | 950 | 100
1024B | 3520 | 200
This data demonstrates the inability for the area map allocator to
handle less than ideal situations. In the best case of reverse
deallocation, the area map allocator was able to perform within range
of the bitmap allocator. In the worst case situation, freeing took
nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator
dramatically improves the consistency of the free path. The small
allocations performed nearly identical regardless of the freeing
pattern.
While it does add to the allocation latency, the allocation scenario
here is optimal for the area map allocator. The area map allocator runs
into trouble when it is allocating in chunks where the latter half is
full. It is difficult to replicate this, so I present a variant where
the pages are second half filled. Freeing was done sequentially. Below
are the numbers for this scenario:
Area Map Allocator:
Object Size | Alloc Time (ms) | Free Time (ms)
----------------------------------------------
4B | 4118 | 4892
16B | 1651 | 1163
64B | 598 | 285
256B | 771 | 158
1024B | 3034 | 160
Bitmap Allocator:
Object Size | Alloc Time (ms) | Free Time (ms)
----------------------------------------------
4B | 481 | 67
16B | 506 | 69
64B | 636 | 75
256B | 892 | 90
1024B | 3262 | 147
The data shows a parabolic curve of performance for the area map
allocator. This is due to the memmove operation being the dominant cost
with the lower object sizes as more objects are packed in a chunk and at
higher object sizes, the traversal of the chunk slots is the dominating
cost. The bitmap allocator suffers this problem as well. The above data
shows the inability to scale for the allocation path with the area map
allocator and that the bitmap allocator demonstrates consistent
performance in general.
The second problem of additional scanning can result in the area map
allocator completing in 52 minutes when trying to allocate 1 million
4-byte objects with 8-byte alignment. The same workload takes
approximately 16 seconds to complete for the bitmap allocator.
V2:
Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap
using bytes instead of bits.
Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since DMA addresses will effectively look like 48-bit addresses when the
memory encryption mask is set, SWIOTLB is needed if the DMA mask of the
device performing the DMA does not support 48-bits. SWIOTLB will be
initialized to create decrypted bounce buffers for use by these devices.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Toshimitsu Kani <toshi.kani@hpe.com>
Cc: kasan-dev@googlegroups.com
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/aa2d29b78ae7d508db8881e46a3215231b9327a7.1500319216.git.thomas.lendacky@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Differentiate the MS_* flags passed to mount(2) from the internal flags set
in the super_block's s_flags. s_flags are now called SB_*, with the names
and the values for the moment mirroring the MS_* flags that they're
equivalent to.
In this patch, just the headers are altered and some kernel code where
blind automated conversion isn't necessarily correct.
Note that this shows up some interesting issues:
(1) Some MS_* flags get translated to MNT_* flags (such as MS_NODEV ->
MNT_NODEV) without passing this on to the filesystem, but some
filesystems set such flags anyway.
(2) The ->remount_fs() methods of some filesystems adjust the *flags
argument by setting MS_* flags in it, such as MS_NOATIME - but these
flags are then scrubbed by do_remount_sb() (only the occupants of
MS_RMT_MASK are permitted: MS_RDONLY, MS_SYNCHRONOUS, MS_MANDLOCK,
MS_I_VERSION and MS_LAZYTIME)
I'm not sure what's the best way to solve all these cases.
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The add_device_randomness() function would ignore incoming bytes if the
crng wasn't ready. This additionally makes sure to make an early enough
call to add_latent_entropy() to influence the initial stack canary,
which is especially important on non-x86 systems where it stays the same
through the life of the boot.
Link: http://lkml.kernel.org/r/20170626233038.GA48751@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some hardened environments want to build kernels with slab_nomerge
already set (so that they do not depend on remembering to set the kernel
command line option). This is desired to reduce the risk of kernel heap
overflows being able to overwrite objects from merged caches and changes
the requirements for cache layout control, increasing the difficulty of
these attacks. By keeping caches unmerged, these kinds of exploits can
usually only damage objects in the same cache (though the risk to
metadata exploitation is unchanged).
Link: http://lkml.kernel.org/r/20170620230911.GA25238@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: David Windsor <dave@nullcore.net>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: David Windsor <dave@nullcore.net>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
