summaryrefslogtreecommitdiffstats
path: root/init
AgeCommit message (Collapse)AuthorFilesLines
2019-07-12Merge tag 'kbuild-v5.3' of ↵Linus Torvalds1-0/+33
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove headers_{install,check}_all targets - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES - re-implement 'make headers_install' more cleanly - add new header-test-y syntax to compile-test headers - compile-test exported headers to ensure they are compilable in user-space - compile-test headers under include/ to ensure they are self-contained - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags - add -Werror=unknown-warning-option for Clang - add 128-bit built-in types support to genksyms - fix missed rebuild of modules.builtin - propagate 'No space left on device' error in fixdep to Make - allow Clang to use its integrated assembler - improve some coccinelle scripts - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute path for $(srctree). - do not ignore errors when compression utility is missing - misc cleanups * tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits) kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix kbuild: Inform user to pass ARCH= for make mrproper kbuild: fix compression errors getting ignored kbuild: add a flag to force absolute path for srctree kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree kbuild: remove src and obj from the top Makefile scripts/tags.sh: remove unused environment variables from comments scripts/tags.sh: drop SUBARCH support for ARM kbuild: compile-test kernel headers to ensure they are self-contained kheaders: include only headers into kheaders_data.tar.xz kheaders: remove meaningless -R option of 'ls' kbuild: support header-test-pattern-y kbuild: do not create wrappers for header-test-y kbuild: compile-test exported headers to ensure they are self-contained init/Kconfig: add CONFIG_CC_CAN_LINK kallsyms: exclude kasan local symbols on s390 kbuild: add more hints about SUBDIRS replacement coccinelle: api/stream_open: treat all wait_.*() calls as blocking coccinelle: put_device: Add a cast to an expression for an assignment coccinelle: put_device: Adjust a message construction ...
2019-07-12mm: init: report memory auto-initialization features at boot timeAlexander Potapenko1-0/+24
Print the currently enabled stack and heap initialization modes. Stack initialization is enabled by a config flag, while heap initialization is configured at boot time with defaults being set in the config. It's more convenient for the user to have all information about these hardening measures in one place at boot, so the user can reason about the expected behavior of the running system. The possible options for stack are: - "all" for CONFIG_INIT_STACK_ALL; - "byref_all" for CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL; - "byref" for CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF; - "__user" for CONFIG_GCC_PLUGIN_STRUCTLEAK_USER; - "off" otherwise. Depending on the values of init_on_alloc and init_on_free boottime options we also report "heap alloc" and "heap free" as "on"/"off". In the init_on_free mode initializing pages at boot time may take a while, so print a notice about that as well. This depends on how much memory is installed, the memory bandwidth, etc. On a relatively modern x86 system, it takes about 0.75s/GB to wipe all memory: [ 0.418722] mem auto-init: stack:byref_all, heap alloc:off, heap free:on [ 0.419765] mem auto-init: clearing system memory may take some time... [ 12.376605] Memory: 16408564K/16776672K available (14339K kernel code, 1397K rwdata, 3756K rodata, 1636K init, 11460K bss, 368108K reserved, 0K cma-reserved) Link: http://lkml.kernel.org/r/20190617151050.92663-3-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Suggested-by: Kees Cook <keescook@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: James Morris <jmorris@namei.org> Cc: Jann Horn <jannh@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Sandeep Patil <sspatil@android.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Marco Elver <elver@google.com> Cc: Kaiwan N Billimoria <kaiwan@kaiwantech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds1-3/+3
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-07-09Merge tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-blockLinus Torvalds1-8/+0
Pull block updates from Jens Axboe: "This is the main block updates for 5.3. Nothing earth shattering or major in here, just fixes, additions, and improvements all over the map. This contains: - Series of documentation fixes (Bart) - Optimization of the blk-mq ctx get/put (Bart) - null_blk removal race condition fix (Bob) - req/bio_op() cleanups (Chaitanya) - Series cleaning up the segment accounting, and request/bio mapping (Christoph) - Series cleaning up the page getting/putting for bios (Christoph) - block cgroup cleanups and moving it to where it is used (Christoph) - block cgroup fixes (Tejun) - Series of fixes and improvements to bcache, most notably a write deadlock fix (Coly) - blk-iolatency STS_AGAIN and accounting fixes (Dennis) - Series of improvements and fixes to BFQ (Douglas, Paolo) - debugfs_create() return value check removal for drbd (Greg) - Use struct_size(), where appropriate (Gustavo) - Two lighnvm fixes (Heiner, Geert) - MD fixes, including a read balance and corruption fix (Guoqing, Marcos, Xiao, Yufen) - block opal shadow mbr additions (Jonas, Revanth) - sbitmap compare-and-exhange improvemnts (Pavel) - Fix for potential bio->bi_size overflow (Ming) - NVMe pull requests: - improved PCIe suspent support (Keith Busch) - error injection support for the admin queue (Akinobu Mita) - Fibre Channel discovery improvements (James Smart) - tracing improvements including nvmetc tracing support (Minwoo Im) - misc fixes and cleanups (Anton Eidelman, Minwoo Im, Chaitanya Kulkarni)" - Various little fixes and improvements to drivers and core" * tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block: (153 commits) blk-iolatency: fix STS_AGAIN handling block: nr_phys_segments needs to be zero for REQ_OP_WRITE_ZEROES blk-mq: simplify blk_mq_make_request() blk-mq: remove blk_mq_put_ctx() sbitmap: Replace cmpxchg with xchg block: fix .bi_size overflow block: sed-opal: check size of shadow mbr block: sed-opal: ioctl for writing to shadow mbr block: sed-opal: add ioctl for done-mark of shadow mbr block: never take page references for ITER_BVEC direct-io: use bio_release_pages in dio_bio_complete block_dev: use bio_release_pages in bio_unmap_user block_dev: use bio_release_pages in blkdev_bio_end_io iomap: use bio_release_pages in iomap_dio_bio_end_io block: use bio_release_pages in bio_map_user_iov block: use bio_release_pages in bio_unmap_user block: optionally mark pages dirty in bio_release_pages block: move the BIO_NO_PAGE_REF check into bio_release_pages block: skd_main.c: Remove call to memset after dma_alloc_coherent block: mtip32xx: Remove call to memset after dma_alloc_coherent ...
2019-07-09kbuild: compile-test kernel headers to ensure they are self-containedMasahiro Yamada1-0/+11
The headers in include/ are globally used in the kernel source tree to provide common APIs. They are included from external modules, too. It will be useful to make as many headers self-contained as possible so that we do not have to rely on a specific include order. There are more than 4000 headers in include/. In my rough analysis, 70% of them are already self-contained. With efforts, most of them can be self-contained. For now, we must exclude more than 1000 headers just because they cannot be compiled as standalone units. I added them to header-test-. The blacklist was mostly generated by a script, so the reason of the breakage should be checked later. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2019-07-08Merge branch 'for-5.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Documentation updates and the addition of cgroup_parse_float() which will be used by new controllers including blk-iocost" * 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: docs: cgroup-v1: convert docs to ReST and rename to *.rst cgroup: Move cgroup_parse_float() implementation out of CONFIG_SYSFS cgroup: add cgroup_parse_float()
2019-07-08Merge branch 'sched-core-for-linus' of ↵Linus Torvalds2-1/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Remove the unused per rq load array and all its infrastructure, by Dietmar Eggemann. - Add utilization clamping support by Patrick Bellasi. This is a refinement of the energy aware scheduling framework with support for boosting of interactive and capping of background workloads: to make sure critical GUI threads get maximum frequency ASAP, and to make sure background processing doesn't unnecessarily move to cpufreq governor to higher frequencies and less energy efficient CPU modes. - Add the bare minimum of tracepoints required for LISA EAS regression testing, by Qais Yousef - which allows automated testing of various power management features, including energy aware scheduling. - Restructure the former tsk_nr_cpus_allowed() facility that the -rt kernel used to modify the scheduler's CPU affinity logic such as migrate_disable() - introduce the task->cpus_ptr value instead of taking the address of &task->cpus_allowed directly - by Sebastian Andrzej Siewior. - Misc optimizations, fixes, cleanups and small enhancements - see the Git log for details. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) sched/uclamp: Add uclamp support to energy_compute() sched/uclamp: Add uclamp_util_with() sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks sched/uclamp: Set default clamps for RT tasks sched/uclamp: Reset uclamp values on RESET_ON_FORK sched/uclamp: Extend sched_setattr() to support utilization clamping sched/core: Allow sched_setattr() to use the current policy sched/uclamp: Add system default clamps sched/uclamp: Enforce last task's UCLAMP_MAX sched/uclamp: Add bucket local max tracking sched/uclamp: Add CPU's clamp buckets refcounting sched/fair: Rename weighted_cpuload() to cpu_runnable_load() sched/debug: Export the newly added tracepoints sched/debug: Add sched_overutilized tracepoint sched/debug: Add new tracepoint to track PELT at se level sched/debug: Add new tracepoints to track PELT at rq level sched/debug: Add a new sched_trace_*() helper functions sched/autogroup: Make autogroup_path() always available sched/wait: Deduplicate code with do-while sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity() ...
2019-07-08Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle are: - rwsem scalability improvements, phase #2, by Waiman Long, which are rather impressive: "On a 2-socket 40-core 80-thread Skylake system with 40 reader and writer locking threads, the min/mean/max locking operations done in a 5-second testing window before the patchset were: 40 readers, Iterations Min/Mean/Max = 1,807/1,808/1,810 40 writers, Iterations Min/Mean/Max = 1,807/50,344/151,255 After the patchset, they became: 40 readers, Iterations Min/Mean/Max = 30,057/31,359/32,741 40 writers, Iterations Min/Mean/Max = 94,466/95,845/97,098" There's a lot of changes to the locking implementation that makes it similar to qrwlock, including owner handoff for more fair locking. Another microbenchmark shows how across the spectrum the improvements are: "With a locking microbenchmark running on 5.1 based kernel, the total locking rates (in kops/s) on a 2-socket Skylake system with equal numbers of readers and writers (mixed) before and after this patchset were: # of Threads Before Patch After Patch ------------ ------------ ----------- 2 2,618 4,193 4 1,202 3,726 8 802 3,622 16 729 3,359 32 319 2,826 64 102 2,744" The changes are extensive and the patch-set has been through several iterations addressing various locking workloads. There might be more regressions, but unless they are pathological I believe we want to use this new implementation as the baseline going forward. - jump-label optimizations by Daniel Bristot de Oliveira: the primary motivation was to remove IPI disturbance of isolated RT-workload CPUs, which resulted in the implementation of batched jump-label updates. Beyond the improvement of the real-time characteristics kernel, in one test this patchset improved static key update overhead from 57 msecs to just 1.4 msecs - which is a nice speedup as well. - atomic64_t cross-arch type cleanups by Mark Rutland: over the last ~10 years of atomic64_t existence the various types used by the APIs only had to be self-consistent within each architecture - which means they became wildly inconsistent across architectures. Mark puts and end to this by reworking all the atomic64 implementations to use 's64' as the base type for atomic64_t, and to ensure that this type is consistently used for parameters and return values in the API, avoiding further problems in this area. - A large set of small improvements to lockdep by Yuyang Du: type cleanups, output cleanups, function return type and othr cleanups all around the place. - A set of percpu ops cleanups and fixes by Peter Zijlstra. - Misc other changes - please see the Git log for more details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits) locking/lockdep: increase size of counters for lockdep statistics locking/atomics: Use sed(1) instead of non-standard head(1) option locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING x86/jump_label: Make tp_vec_nr static x86/percpu: Optimize raw_cpu_xchg() x86/percpu, sched/fair: Avoid local_clock() x86/percpu, x86/irq: Relax {set,get}_irq_regs() x86/percpu: Relax smp_processor_id() x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}() locking/rwsem: Guard against making count negative locking/rwsem: Adaptive disabling of reader optimistic spinning locking/rwsem: Enable time-based spinning on reader-owned rwsem locking/rwsem: Make rwsem->owner an atomic_long_t locking/rwsem: Enable readers spinning on writer locking/rwsem: Clarify usage of owner's nonspinaable bit locking/rwsem: Wake up almost all readers in wait queue locking/rwsem: More optimal RT task handling of null owner locking/rwsem: Always release wait_lock before waking up tasks locking/rwsem: Implement lock handoff to prevent lock starvation locking/rwsem: Make rwsem_spin_on_owner() return owner state ...
2019-07-08kbuild: compile-test exported headers to ensure they are self-containedMasahiro Yamada1-0/+10
Multiple people have suggested compile-testing UAPI headers to ensure they can be really included from user-space. "make headers_check" is obviously not enough to catch bugs, and we often leak unresolved references to user-space. Use the new header-test-y syntax to implement it. Please note exported headers are compile-tested with a completely different set of compiler flags. The header search path is set to $(objtree)/usr/include since exported headers should not include unexported ones. We use -std=gnu89 for the kernel space since the kernel code highly depends on GNU extensions. On the other hand, UAPI headers should be written in more standardized C, so they are compiled with -std=c90. This will emit errors if C++ style comments, the keyword 'inline', etc. are used. Please use C style comments (/* ... */), '__inline__', etc. in UAPI headers. There is additional compiler requirement to enable this test because many of UAPI headers include <stdlib.h>, <sys/ioctl.h>, <sys/time.h>, etc. directly or indirectly. You cannot use kernel.org pre-built toolchains [1] since they lack <stdlib.h>. I reused CONFIG_CC_CAN_LINK to check the system header availability. The intention is slightly different, but a compiler that can link userspace programs provide system headers. For now, a lot of headers need to be excluded because they cannot be compiled standalone, but this is a good start point. [1] https://mirrors.edge.kernel.org/pub/tools/crosstool/index.html Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2019-07-08init/Kconfig: add CONFIG_CC_CAN_LINKMasahiro Yamada1-0/+3
Currently, scripts/cc-can-link.sh is run just for BPFILTER_UMH, but defining CC_CAN_LINK will be useful in other places. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29initramfs: fix populate_initrd_image() section mismatchGeert Uytterhoeven1-2/+2
With gcc-4.6.3: WARNING: vmlinux.o(.text.unlikely+0x140): Section mismatch in reference from the function populate_initrd_image() to the variable .init.ramfs.info:__initramfs_size The function populate_initrd_image() references the variable __init __initramfs_size. This is often because populate_initrd_image lacks a __init annotation or the annotation of __initramfs_size is wrong. WARNING: vmlinux.o(.text.unlikely+0x14c): Section mismatch in reference from the function populate_initrd_image() to the function .init.text:unpack_to_rootfs() The function populate_initrd_image() references the function __init unpack_to_rootfs(). This is often because populate_initrd_image lacks a __init annotation or the annotation of unpack_to_rootfs is wrong. WARNING: vmlinux.o(.text.unlikely+0x198): Section mismatch in reference from the function populate_initrd_image() to the function .init.text:xwrite() The function populate_initrd_image() references the function __init xwrite(). This is often because populate_initrd_image lacks a __init annotation or the annotation of xwrite is wrong. Indeed, if the compiler decides not to inline populate_initrd_image(), a warning is generated. Fix this by adding the missing __init annotations. Link: http://lkml.kernel.org/r/20190617074340.12779-1-geert@linux-m68k.org Fixes: 7c184ecd262fe64f ("initramfs: factor out a helper to populate the initrd image") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-24sched/uclamp: Add CPU's clamp buckets refcountingPatrick Bellasi1-0/+53
Utilization clamping allows to clamp the CPU's utilization within a [util_min, util_max] range, depending on the set of RUNNABLE tasks on that CPU. Each task references two "clamp buckets" defining its minimum and maximum (util_{min,max}) utilization "clamp values". A CPU's clamp bucket is active if there is at least one RUNNABLE tasks enqueued on that CPU and refcounting that bucket. When a task is {en,de}queued {on,from} a rq, the set of active clamp buckets on that CPU can change. If the set of active clamp buckets changes for a CPU a new "aggregated" clamp value is computed for that CPU. This is because each clamp bucket enforces a different utilization clamp value. Clamp values are always MAX aggregated for both util_min and util_max. This ensures that no task can affect the performance of other co-scheduled tasks which are more boosted (i.e. with higher util_min clamp) or less capped (i.e. with higher util_max clamp). A task has: task_struct::uclamp[clamp_id]::bucket_id to track the "bucket index" of the CPU's clamp bucket it refcounts while enqueued, for each clamp index (clamp_id). A runqueue has: rq::uclamp[clamp_id]::bucket[bucket_id].tasks to track how many RUNNABLE tasks on that CPU refcount each clamp bucket (bucket_id) of a clamp index (clamp_id). It also has a: rq::uclamp[clamp_id]::bucket[bucket_id].value to track the clamp value of each clamp bucket (bucket_id) of a clamp index (clamp_id). The rq::uclamp::bucket[clamp_id][] array is scanned every time it's needed to find a new MAX aggregated clamp value for a clamp_id. This operation is required only when it's dequeued the last task of a clamp bucket tracking the current MAX aggregated clamp value. In this case, the CPU is either entering IDLE or going to schedule a less boosted or more clamped task. The expected number of different clamp values configured at build time is small enough to fit the full unordered array into a single cache line, for configurations of up to 7 buckets. Add to struct rq the basic data structures required to refcount the number of RUNNABLE tasks for each clamp bucket. Add also the max aggregation required to update the rq's clamp value at each enqueue/dequeue event. Use a simple linear mapping of clamp values into clamp buckets. Pre-compute and cache bucket_id to avoid integer divisions at enqueue/dequeue time. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190621084217.8167-2-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-20block: rename CONFIG_DEBUG_BLK_CGROUP to CONFIG_BFQ_CGROUP_DEBUGChristoph Hellwig1-8/+0
This option is entirely bfq specific, give it an appropinquate name. Also make it depend on CONFIG_BFQ_GROUP_IOSCHED in Kconfig, as all the functionality already does so anyway. Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-17Merge tag 'v5.2-rc5' into sched/core, to pick up fixesIngo Molnar1-9/+8
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-17Merge tag 'v5.2-rc5' into locking/core, to pick up fixesIngo Molnar1-9/+8
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-15kbuild: add support for ensuring headers are self-containedJani Nikula1-0/+9
Sometimes it's useful to be able to explicitly ensure certain headers remain self-contained, i.e. that they are compilable as standalone units, by including and/or forward declaring everything they depend on. Add special target header-test-y where individual Makefiles can add headers to be tested if CONFIG_HEADER_TEST is enabled. This will generate a dummy C file per header that gets built as part of extra-y. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-14docs: scheduler: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-3/+3
In order to prepare to add them to the Kernel API book, convert the files to ReST format. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-14docs: cgroup-v1: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-1/+1
Convert the cgroup-v1 files to ReST format, in order to allow a later addition to the admin-guide. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-06-08Merge tag 'char-misc-5.2-rc4' of ↵Linus Torvalds1-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.2-rc4 to resolve a number of reported issues. The most "notable" one here is the kernel headers in proc^Wsysfs fixes. Those changes move the header file info into sysfs and fixes the build issues that you reported. Other than that, a bunch of small habanalabs driver fixes, some fpga driver fixes, and a few other tiny driver fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Read upper bits of trace buffer from RWPHI habanalabs: Fix virtual address access via debugfs for 2MB pages fpga: zynqmp-fpga: Correctly handle error pointer habanalabs: fix bug in checking huge page optimization habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close test_firmware: Use correct snprintf() limit genwqe: Prevent an integer overflow in the ioctl parport: Fix mem leak in parport_register_dev_model fpga: dfl: expand minor range when registering chrdev region fpga: dfl: Add lockdep classes for pdata->lock fpga: dfl: afu: Pass the correct device to dma_mapping_error() fpga: stratix10-soc: fix use-after-free on s10_init() w1: ds2408: Fix typo after 49695ac46861 (reset on output_write retry with readback) kheaders: Do not regenerate archive if config is not changed kheaders: Move from proc to sysfs lkdtm/bugs: Adjust recursion test to avoid elision lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
2019-06-03locking/lockdep: Define INITIAL_CHAIN_KEY for chain keys to start withYuyang Du1-1/+1
Chain keys are computed using Jenkins hash function, which needs an initial hash to start with. Dedicate a macro to make this clear and configurable. A later patch changes this initial chain key. Signed-off-by: Yuyang Du <duyuyang@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bvanassche@acm.org Cc: frederic@kernel.org Cc: ming.lei@redhat.com Cc: will.deacon@arm.com Link: https://lkml.kernel.org/r/20190506081939.74287-9-duyuyang@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-03locking/lockdep: Use lockdep_init_task for task initiation consistentlyYuyang Du1-0/+2
Despite that there is a lockdep_init_task() which does nothing, lockdep initiates tasks by assigning lockdep fields and does so inconsistently. Fix this by using lockdep_init_task(). Signed-off-by: Yuyang Du <duyuyang@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bvanassche@acm.org Cc: frederic@kernel.org Cc: ming.lei@redhat.com Cc: will.deacon@arm.com Link: https://lkml.kernel.org/r/20190506081939.74287-8-duyuyang@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-03sched/core: Provide a pointer to the valid CPU maskSebastian Andrzej Siewior1-1/+2
In commit: 4b53a3412d66 ("sched/core: Remove the tsk_nr_cpus_allowed() wrapper") the tsk_nr_cpus_allowed() wrapper was removed. There was not much difference in !RT but in RT we used this to implement migrate_disable(). Within a migrate_disable() section the CPU mask is restricted to single CPU while the "normal" CPU mask remains untouched. As an alternative implementation Ingo suggested to use: struct task_struct { const cpumask_t *cpus_ptr; cpumask_t cpus_mask; }; with t->cpus_ptr = &t->cpus_mask; In -RT we then can switch the cpus_ptr to: t->cpus_ptr = &cpumask_of(task_cpu(p)); in a migration disabled region. The rules are simple: - Code that 'uses' ->cpus_allowed would use the pointer. - Code that 'modifies' ->cpus_allowed would use the direct mask. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190423142636.14347-1-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 167Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 83 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.021731668@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24kheaders: Move from proc to sysfsJoel Fernandes (Google)1-9/+8
The kheaders archive consisting of the kernel headers used for compiling bpf programs is in /proc. However there is concern that moving it here will make it permanent. Let us move it to /sys/kernel as discussed [1]. [1] https://lore.kernel.org/patchwork/patch/1067310/#1265969 Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner3-0/+3
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-18initramfs: don't free a non-existent initrdSteven Price1-1/+1
Since commit 54c7a8916a88 ("initramfs: free initrd memory if opening /initrd.image fails"), the kernel has unconditionally attempted to free the initrd even if it doesn't exist. In the non-existent case this causes a boot-time splat if CONFIG_DEBUG_VIRTUAL is enabled due to a call to virt_to_phys() with a NULL address. Instead we should check that the initrd actually exists and only attempt to free it if it does. Link: http://lkml.kernel.org/r/20190516143125.48948-1-steven.price@arm.com Fixes: 54c7a8916a88 ("initramfs: free initrd memory if opening /initrd.image fails") Signed-off-by: Steven Price <steven.price@arm.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm: shuffle initial free memory to improve memory-side-cache utilizationDan Williams1-0/+24
Patch series "mm: Randomize free memory", v10. This patch (of 3): Randomization of the page allocator improves the average utilization of a direct-mapped memory-side-cache. Memory side caching is a platform capability that Linux has been previously exposed to in HPC (high-performance computing) environments on specialty platforms. In that instance it was a smaller pool of high-bandwidth-memory relative to higher-capacity / lower-bandwidth DRAM. Now, this capability is going to be found on general purpose server platforms where DRAM is a cache in front of higher latency persistent memory [1]. Robert offered an explanation of the state of the art of Linux interactions with memory-side-caches [2], and I copy it here: It's been a problem in the HPC space: http://www.nersc.gov/research-and-development/knl-cache-mode-performance-coe/ A kernel module called zonesort is available to try to help: https://software.intel.com/en-us/articles/xeon-phi-software and this abandoned patch series proposed that for the kernel: https://lkml.kernel.org/r/20170823100205.17311-1-lukasz.daniluk@intel.com Dan's patch series doesn't attempt to ensure buffers won't conflict, but also reduces the chance that the buffers will. This will make performance more consistent, albeit slower than "optimal" (which is near impossible to attain in a general-purpose kernel). That's better than forcing users to deploy remedies like: "To eliminate this gradual degradation, we have added a Stream measurement to the Node Health Check that follows each job; nodes are rebooted whenever their measured memory bandwidth falls below 300 GB/s." A replacement for zonesort was merged upstream in commit cc9aec03e58f ("x86/numa_emulation: Introduce uniform split capability"). With this numa_emulation capability, memory can be split into cache sized ("near-memory" sized) numa nodes. A bind operation to such a node, and disabling workloads on other nodes, enables full cache performance. However, once the workload exceeds the cache size then cache conflicts are unavoidable. While HPC environments might be able to tolerate time-scheduling of cache sized workloads, for general purpose server platforms, the oversubscribed cache case will be the common case. The worst case scenario is that a server system owner benchmarks a workload at boot with an un-contended cache only to see that performance degrade over time, even below the average cache performance due to excessive conflicts. Randomization clips the peaks and fills in the valleys of cache utilization to yield steady average performance. Here are some performance impact details of the patches: 1/ An Intel internal synthetic memory bandwidth measurement tool, saw a 3X speedup in a contrived case that tries to force cache conflicts. The contrived cased used the numa_emulation capability to force an instance of the benchmark to be run in two of the near-memory sized numa nodes. If both instances were placed on the same emulated they would fit and cause zero conflicts. While on separate emulated nodes without randomization they underutilized the cache and conflicted unnecessarily due to the in-order allocation per node. 2/ A well known Java server application benchmark was run with a heap size that exceeded cache size by 3X. The cache conflict rate was 8% for the first run and degraded to 21% after page allocator aging. With randomization enabled the rate levelled out at 11%. 3/ A MongoDB workload did not observe measurable difference in cache-conflict rates, but the overall throughput dropped by 7% with randomization in one case. 4/ Mel Gorman ran his suite of performance workloads with randomization enabled on platforms without a memory-side-cache and saw a mix of some improvements and some losses [3]. While there is potentially significant improvement for applications that depend on low latency access across a wide working-set, the performance may be negligible to negative for other workloads. For this reason the shuffle capability defaults to off unless a direct-mapped memory-side-cache is detected. Even then, the page_alloc.shuffle=0 parameter can be specified to disable the randomization on those systems. Outside of memory-side-cache utilization concerns there is potentially security benefit from randomization. Some data exfiltration and return-oriented-programming attacks rely on the ability to infer the location of sensitive data objects. The kernel page allocator, especially early in system boot, has predictable first-in-first out behavior for physical pages. Pages are freed in physical address order when first onlined. Quoting Kees: "While we already have a base-address randomization (CONFIG_RANDOMIZE_MEMORY), attacks against the same hardware and memory layouts would certainly be using the predictability of allocation ordering (i.e. for attacks where the base address isn't important: only the relative positions between allocated memory). This is common in lots of heap-style attacks. They try to gain control over ordering by spraying allocations, etc. I'd really like to see this because it gives us something similar to CONFIG_SLAB_FREELIST_RANDOM but for the page allocator." While SLAB_FREELIST_RANDOM reduces the predictability of some local slab caches it leaves vast bulk of memory to be predictably in order allocated. However, it should be noted, the concrete security benefits are hard to quantify, and no known CVE is mitigated by this randomization. Introduce shuffle_free_memory(), and its helper shuffle_zone(), to perform a Fisher-Yates shuffle of the page allocator 'free_area' lists when they are initially populated with free memory at boot and at hotplug time. Do this based on either the presence of a page_alloc.shuffle=Y command line parameter, or autodetection of a memory-side-cache (to be added in a follow-on patch). The shuffling is done in terms of CONFIG_SHUFFLE_PAGE_ORDER sized free pages where the default CONFIG_SHUFFLE_PAGE_ORDER is MAX_ORDER-1 i.e. 10, 4MB this trades off randomization granularity for time spent shuffling. MAX_ORDER-1 was chosen to be minimally invasive to the page allocator while still showing memory-side cache behavior improvements, and the expectation that the security implications of finer granularity randomization is mitigated by CONFIG_SLAB_FREELIST_RANDOM. The performance impact of the shuffling appears to be in the noise compared to other memory initialization work. This initial randomization can be undone over time so a follow-on patch is introduced to inject entropy on page free decisions. It is reasonable to ask if the page free entropy is sufficient, but it is not enough due to the in-order initial freeing of pages. At the start of that process putting page1 in front or behind page0 still keeps them close together, page2 is still near page1 and has a high chance of being adjacent. As more pages are added ordering diversity improves, but there is still high page locality for the low address pages and this leads to no significant impact to the cache conflict rate. [1]: https://itpeernetwork.intel.com/intel-optane-dc-persistent-memory-operating-modes/ [2]: https://lkml.kernel.org/r/AT5PR8401MB1169D656C8B5E121752FC0F8AB120@AT5PR8401MB1169.NAMPRD84.PROD.OUTLOOK.COM [3]: https://lkml.org/lkml/2018/10/12/309 [dan.j.williams@intel.com: fix shuffle enable] Link: http://lkml.kernel.org/r/154943713038.3858443.4125180191382062871.stgit@dwillia2-desk3.amr.corp.intel.com [cai@lca.pw: fix SHUFFLE_PAGE_ALLOCATOR help texts] Link: http://lkml.kernel.org/r/20190425201300.75650-1-cai@lca.pw Link: http://lkml.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Robert Elliott <elliott@hpe.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14init: free_initmem: poison freed init memoryMike Rapoport1-1/+1
Various architectures including x86 poison the freed init memory. Do the same in the generic free_initmem implementation and switch sparc32 architecture that is identical to the generic code over to it now. Link: http://lkml.kernel.org/r/1550515285-17446-4-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14init: provide a generic free_initmem implementationMike Rapoport1-0/+5
Patch series "provide a generic free_initmem implementation", v2. Many architectures implement free_initmem() in exactly the same or very similar way: they wrap the call to free_initmem_default() with sometimes different 'poison' parameter. These patches switch those architectures to use a generic implementation that does free_initmem_default(POISON_FREE_INITMEM). This was inspired by Christoph's patches for free_initrd_mem [1] and I shamelessly copied changelog entries from his patches :) [1] https://lore.kernel.org/lkml/20190213174621.29297-1-hch@lst.de/ This patch (of 2): For most architectures free_initmem just a wrapper for the same free_initmem_default(-1) call. Provide that as a generic implementation marked __weak. Link: http://lkml.kernel.org/r/1550515285-17446-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14initramfs: poison freed initrd memoryChristoph Hellwig1-1/+2
Various architectures including x86 poison the freed initrd memory. Do the same in the generic free_initrd_mem implementation and switch a few more architectures that are identical to the generic code over to it now. Link: http://lkml.kernel.org/r/20190213174621.29297-9-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14initramfs: provide a generic free_initrd_mem implementationChristoph Hellwig1-0/+5
For most architectures free_initrd_mem just expands to the same free_reserved_area call. Provide that as a generic implementation marked __weak. Link: http://lkml.kernel.org/r/20190213174621.29297-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14initramfs: move the legacy keepinitrd parameter to core codeChristoph Hellwig1-0/+9
No need to handle the freeing disable in arch code when we already have a core hook (and a different name for the option) for it. Link: http://lkml.kernel.org/r/20190213174621.29297-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14initramfs: cleanup populate_rootfsChristoph Hellwig1-17/+20
The code for kernels that support ramdisks or not is mostly the same. Unify it by using an IS_ENABLED for the info message, and moving the error message into a stub for populate_initrd_image. [cai@lca.pw: fix a compilation error] Link: http://lkml.kernel.org/r/20190328014806.36375-1-cai@lca.pw Link: http://lkml.kernel.org/r/20190213174621.29297-6-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14initramfs: factor out a helper to populate the initrd imageChristoph Hellwig1-17/+23
This will allow for cleaner code sharing in the caller. Link: http://lkml.kernel.org/r/20190213174621.29297-5-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14initramfs: cleanup initrd freeingChristoph Hellwig1-23/+30
Factor the kexec logic into a separate helper, and then inline the rest of free_initrd into the only caller. Link: http://lkml.kernel.org/r/20190213174621.29297-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14initramfs: free initrd memory if opening /initrd.image failsChristoph Hellwig1-8/+6
Patch series "initramfs tidyups". I've spent some time chasing down behavior in initramfs and found plenty of opportunity to improve the code. A first stab on that is contained in this series. This patch (of 7): We free the initrd memory for all successful or error cases except for the case where opening /initrd.image fails, which looks like an oversight. Steven said: : This also changes the behaviour when CONFIG_INITRAMFS_FORCE is enabled : - specifically it means that the initrd is freed (previously it was : ignored and never freed). But that seems like reasonable behaviour and : the previous behaviour looks like another oversight. Link: http://lkml.kernel.org/r/20190213174621.29297-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-07Merge tag 'random_for_linus' of ↵Linus Torvalds1-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull randomness updates from Ted Ts'o: - initialize the random driver earler - fix CRNG initialization when we trust the CPU's RNG on NUMA systems - other miscellaneous cleanups and fixes. * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: add a spinlock_t to struct batched_entropy random: document get_random_int() family random: fix CRNG initialization when random.trust_cpu=1 random: move rand_initialize() earlier random: only read from /dev/random after its pool has received 128 bits drivers/char/random.c: make primary_crng static drivers/char/random.c: remove unused stuct poolinfo::poolbits drivers/char/random.c: constify poolinfo_table
2019-05-07Merge tag 'driver-core-5.2-rc1' of ↵Linus Torvalds1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core/kobject updates from Greg KH: "Here is the "big" set of driver core patches for 5.2-rc1 There are a number of ACPI patches in here as well, as Rafael said they should go through this tree due to the driver core changes they required. They have all been acked by the ACPI developers. There are also a number of small subsystem-specific changes in here, due to some changes to the kobject core code. Those too have all been acked by the various subsystem maintainers. As for content, it's pretty boring outside of the ACPI changes: - spdx cleanups - kobject documentation updates - default attribute groups for kobjects - other minor kobject/driver core fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits) kobject: clean up the kobject add documentation a bit more kobject: Fix kernel-doc comment first line kobject: Remove docstring reference to kset firmware_loader: Fix a typo ("syfs" -> "sysfs") kobject: fix dereference before null check on kobj Revert "driver core: platform: Fix the usage of platform device name(pdev->name)" init/config: Do not select BUILD_BIN2C for IKCONFIG Provide in-kernel headers to make extending kernel easier kobject: Improve doc clarity kobject_init_and_add() kobject: Improve docs for kobject_add/del driver core: platform: Fix the usage of platform device name(pdev->name) livepatch: Replace klp_ktype_patch's default_attrs with groups cpufreq: schedutil: Replace default_attrs field with groups padata: Replace padata_attr_type default_attrs field with groups irqdesc: Replace irq_kobj_type's default_attrs field with groups net-sysfs: Replace ktype default_attrs field with groups block: Replace all ktype default_attrs with groups samples/kobject: Replace foo_ktype's default_attrs field with groups kobject: Add support for default attribute groups to kobj_type driver core: Postpone DMA tear-down until after devres release for probe failure ...
2019-05-07Merge tag 'pidfd-v5.2-rc1' of ↵Linus Torvalds1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This patchset makes it possible to retrieve pidfds at process creation time by introducing the new flag CLONE_PIDFD to the clone() system call. Linus originally suggested to implement this as a new flag to clone() instead of making it a separate system call. After a thorough review from Oleg CLONE_PIDFD returns pidfds in the parent_tidptr argument. This means we can give back the associated pid and the pidfd at the same time. Access to process metadata information thus becomes rather trivial. As has been agreed, CLONE_PIDFD creates file descriptors based on anonymous inodes similar to the new mount api. They are made unconditional by this patchset as they are now needed by core kernel code (vfs, pidfd) even more than they already were before (timerfd, signalfd, io_uring, epoll etc.). The core patchset is rather small. The bulky looking changelist is caused by David's very simple changes to Kconfig to make anon inodes unconditional. A pidfd comes with additional information in fdinfo if the kernel supports procfs. The fdinfo file contains the pid of the process in the callers pid namespace in the same format as the procfs status file, i.e. "Pid:\t%d". To remove worries about missing metadata access this patchset comes with a sample/test program that illustrates how a combination of CLONE_PIDFD and pidfd_send_signal() can be used to gain race-free access to process metadata through /proc/<pid>. Further work based on this patchset has been done by Joel. His work makes pidfds pollable. It finished too late for this merge window. I would prefer to have it sitting in linux-next for a while and send it for inclusion during the 5.3 merge window" * tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: samples: show race-free pidfd metadata access signal: support CLONE_PIDFD with pidfd_send_signal clone: add CLONE_PIDFD Make anon_inodes unconditional
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-05-05x86/mm: Initialize PGD cache during mm initializationNadav Amit1-0/+3
Poking-mm initialization might require to duplicate the PGD in early stage. Initialize the PGD cache earlier to prevent boot failures. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4fc19708b165 ("x86/alternatives: Initialize temporary mm for patching") Link: http://lkml.kernel.org/r/20190505011124.39692-1-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-30x86/alternatives: Initialize temporary mm for patchingNadav Amit1-0/+3
To prevent improper use of the PTEs that are used for text patching, the next patches will use a temporary mm struct. Initailize it by copying the init mm. The address that will be used for patching is taken from the lower area that is usually used for the task memory. Doing so prevents the need to frequently synchronize the temporary-mm (e.g., when BPF programs are installed), since different PGDs are used for the task memory. Finally, randomize the address of the PTEs to harden against exploits that use these PTEs. Suggested-by: Andy Lutomirski <luto@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: ard.biesheuvel@linaro.org Cc: deneen.t.dock@intel.com Cc: kernel-hardening@lists.openwall.com Cc: kristen@linux.intel.com Cc: linux_dti@icloud.com Cc: will.deacon@arm.com Link: https://lkml.kernel.org/r/20190426232303.28381-8-nadav.amit@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-29init/config: Do not select BUILD_BIN2C for IKCONFIGJoel Fernandes (Google)1-1/+0
Since commit 13610aa908dc ("kernel/configs: use .incbin directive to embed config_data.gz"), IKCONFIG no longer uses BUILD_BIN2C so prevent it from being selected in Kconfig. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-29Provide in-kernel headers to make extending kernel easierJoel Fernandes (Google)1-0/+10
Introduce in-kernel headers which are made available as an archive through proc (/proc/kheaders.tar.xz file). This archive makes it possible to run eBPF and other tracing programs that need to extend the kernel for tracing purposes without any dependency on the file system having headers. A github PR is sent for the corresponding BCC patch at: https://github.com/iovisor/bcc/pull/2312 On Android and embedded systems, it is common to switch kernels but not have kernel headers available on the file system. Further once a different kernel is booted, any headers stored on the file system will no longer be useful. This is an issue even well known to distros. By storing the headers as a compressed archive within the kernel, we can avoid these issues that have been a hindrance for a long time. The best way to use this feature is by building it in. Several users have a need for this, when they switch debug kernels, they do not want to update the filesystem or worry about it where to store the headers on it. However, the feature is also buildable as a module in case the user desires it not being part of the kernel image. This makes it possible to load and unload the headers from memory on demand. A tracing program can load the module, do its operations, and then unload the module to save kernel memory. The total memory needed is 3.3MB. By having the archive available at a fixed location independent of filesystem dependencies and conventions, all debugging tools can directly refer to the fixed location for the archive, without concerning with where the headers on a typical filesystem which significantly simplifies tooling that needs kernel headers. The code to read the headers is based on /proc/config.gz code and uses the same technique to embed the headers. Other approaches were discussed such as having an in-memory mountable filesystem, but that has drawbacks such as requiring an in-kernel xz decompressor which we don't have today, and requiring usage of 42 MB of kernel memory to host the decompressed headers at anytime. Also this approach is simpler than such approaches. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19random: move rand_initialize() earlierKees Cook1-7/+14
Right now rand_initialize() is run as an early_initcall(), but it only depends on timekeeping_init() (for mixing ktime_get_real() into the pools). However, the call to boot_init_stack_canary() for stack canary initialization runs earlier, which triggers a warning at boot: random: get_random_bytes called from start_kernel+0x357/0x548 with crng_init=0 Instead, this moves rand_initialize() to after timekeeping_init(), and moves canary initialization here as well. Note that this warning may still remain for machines that do not have UEFI RNG support (which initializes the RNG pools during setup_arch()), or for x86 machines without RDRAND (or booting without "random.trust=on" or CONFIG_RANDOM_TRUST_CPU=y). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-19init: initialize jump labels before command line option parsingDan Williams1-2/+2
When a module option, or core kernel argument, toggles a static-key it requires jump labels to be initialized early. While x86, PowerPC, and ARM64 arrange for jump_label_init() to be called before parse_args(), ARM does not. Kernel command line: rdinit=/sbin/init page_alloc.shuffle=1 panic=-1 console=ttyAMA0,115200 page_alloc.shuffle=1 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ./include/linux/jump_label.h:303 page_alloc_shuffle+0x12c/0x1ac static_key_enable(): static key 'page_alloc_shuffle_key+0x0/0x4' used before call to jump_label_init() Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc4-next-20190410-00003-g3367c36ce744 #1 Hardware name: ARM Integrator/CP (Device Tree) [<c0011c68>] (unwind_backtrace) from [<c000ec48>] (show_stack+0x10/0x18) [<c000ec48>] (show_stack) from [<c07e9710>] (dump_stack+0x18/0x24) [<c07e9710>] (dump_stack) from [<c001bb1c>] (__warn+0xe0/0x108) [<c001bb1c>] (__warn) from [<c001bb88>] (warn_slowpath_fmt+0x44/0x6c) [<c001bb88>] (warn_slowpath_fmt) from [<c0b0c4a8>] (page_alloc_shuffle+0x12c/0x1ac) [<c0b0c4a8>] (page_alloc_shuffle) from [<c0b0c550>] (shuffle_store+0x28/0x48) [<c0b0c550>] (shuffle_store) from [<c003e6a0>] (parse_args+0x1f4/0x350) [<c003e6a0>] (parse_args) from [<c0ac3c00>] (start_kernel+0x1c0/0x488) Move the fallback call to jump_label_init() to occur before parse_args(). The redundant calls to jump_label_init() in other archs are left intact in case they have static key toggling use cases that are even earlier than option parsing. Link: http://lkml.kernel.org/r/155544804466.1032396.13418949511615676665.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Guenter Roeck <groeck@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Russell King <rmk@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19Make anon_inodes unconditionalDavid Howells1-10/+0
Make the anon_inodes facility unconditional so that it can be used by core VFS code and pidfd code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [christian@brauner.io: adapt commit message to mention pidfds] Signed-off-by: Christian Brauner <christian@brauner.io>
2019-04-09treewide: Switch printk users from %pf and %pF to %ps and %pS, respectivelySakari Ailus1-3/+3
%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: David Sterba <dsterba@suse.com> (for btrfs) Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-03-12init/main: add checks for the return value of memblock_alloc*()Mike Rapoport1-6/+20
Add panic() calls if memblock_alloc() returns NULL. The panic() format duplicates the one used by memblock itself and in order to avoid explosion with long parameters list replace open coded allocation size calculations with a local variable. Link: http://lkml.kernel.org/r/1548057848-15136-18-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>