summaryrefslogtreecommitdiffstats
path: root/init
AgeCommit message (Collapse)AuthorFilesLines
2018-12-28Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-blockLinus Torvalds3-21/+0
Pull block updates from Jens Axboe: "This is the main pull request for block/storage for 4.21. Larger than usual, it was a busy round with lots of goodies queued up. Most notable is the removal of the old IO stack, which has been a long time coming. No new features for a while, everything coming in this week has all been fixes for things that were previously merged. This contains: - Use atomic counters instead of semaphores for mtip32xx (Arnd) - Cleanup of the mtip32xx request setup (Christoph) - Fix for circular locking dependency in loop (Jan, Tetsuo) - bcache (Coly, Guoju, Shenghui) * Optimizations for writeback caching * Various fixes and improvements - nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith) * host and target support for NVMe over TCP * Error log page support * Support for separate read/write/poll queues * Much improved polling * discard OOM fallback * Tracepoint improvements - lightnvm (Hans, Hua, Igor, Matias, Javier) * Igor added packed metadata to pblk. Now drives without metadata per LBA can be used as well. * Fix from Geert on uninitialized value on chunk metadata reads. * Fixes from Hans and Javier to pblk recovery and write path. * Fix from Hua Su to fix a race condition in the pblk recovery code. * Scan optimization added to pblk recovery from Zhoujie. * Small geometry cleanup from me. - Conversion of the last few drivers that used the legacy path to blk-mq (me) - Removal of legacy IO path in SCSI (me, Christoph) - Removal of legacy IO stack and schedulers (me) - Support for much better polling, now without interrupts at all. blk-mq adds support for multiple queue maps, which enables us to have a map per type. This in turn enables nvme to have separate completion queues for polling, which can then be interrupt-less. Also means we're ready for async polled IO, which is hopefully coming in the next release. - Killing of (now) unused block exports (Christoph) - Unification of the blk-rq-qos and blk-wbt wait handling (Josef) - Support for zoned testing with null_blk (Masato) - sx8 conversion to per-host tag sets (Christoph) - IO priority improvements (Damien) - mq-deadline zoned fix (Damien) - Ref count blkcg series (Dennis) - Lots of blk-mq improvements and speedups (me) - sbitmap scalability improvements (me) - Make core inflight IO accounting per-cpu (Mikulas) - Export timeout setting in sysfs (Weiping) - Cleanup the direct issue path (Jianchao) - Export blk-wbt internals in block debugfs for easier debugging (Ming) - Lots of other fixes and improvements" * tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits) kyber: use sbitmap add_wait_queue/list_del wait helpers sbitmap: add helpers for add/del wait queue handling block: save irq state in blkg_lookup_create() dm: don't reuse bio for flushes nvme-pci: trace SQ status on completions nvme-rdma: implement polling queue map nvme-fabrics: allow user to pass in nr_poll_queues nvme-fabrics: allow nvmf_connect_io_queue to poll nvme-core: optionally poll sync commands block: make request_to_qc_t public nvme-tcp: fix spelling mistake "attepmpt" -> "attempt" nvme-tcp: fix endianess annotations nvmet-tcp: fix endianess annotations nvme-pci: refactor nvme_poll_irqdisable to make sparse happy nvme-pci: only set nr_maps to 2 if poll queues are supported nvmet: use a macro for default error location nvmet: fix comparison of a u16 with -1 blk-mq: enable IO poll if .nr_queues of type poll > 0 blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight() blk-mq: skip zero-queue maps in blk_mq_map_swqueue ...
2018-12-27Merge tag 'audit-pr-20181224' of ↵Linus Torvalds1-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "In the finest of holiday of traditions, I have a number of gifts to share today. While most of them are re-gifts from others, unlike the typical re-gift, these are things you will want in and around your tree; I promise. This pull request is perhaps a bit larger than our typical PR, but most of it comes from Jan's rework of audit's fanotify code; a very welcome improvement. We ran this through our normal regression tests, as well as some newly created stress tests and everything looks good. Richard added a few patches, mostly cleaning up a few things and and shortening some of the audit records that we send to userspace; a change the userspace folks are quite happy about. Finally YueHaibing and I kick in a few patches to simplify things a bit and make the code less prone to errors. Lastly, I want to say thanks one more time to everyone who has contributed patches, testing, and code reviews for the audit subsystem over the past year. The project is what it is due to your help and contributions - thank you" * tag 'audit-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (22 commits) audit: remove duplicated include from audit.c audit: shorten PATH cap values when zero audit: use current whenever possible audit: minimize our use of audit_log_format() audit: remove WATCH and TREE config options audit: use session_info helper audit: localize audit_log_session_info prototype audit: Use 'mark' name for fsnotify_mark variables audit: Replace chunk attached to mark instead of replacing mark audit: Simplify locking around untag_chunk() audit: Drop all unused chunk nodes during deletion audit: Guarantee forward progress of chunk untagging audit: Allocate fsnotify mark independently of chunk audit: Provide helper for dropping mark's chunk reference audit: Remove pointless check in insert_hash() audit: Factor out chunk replacement code audit: Make hash table insertion safe against concurrent lookups audit: Embed key into chunk audit: Fix possible tagging failures audit: Fix possible spurious -ENOSPC error ...
2018-12-26Merge branch 'efi-core-for-linus' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The main changes in this cycle were: - Allocate the E820 buffer before doing the GetMemoryMap/ExitBootServices dance so we don't run out of space - Clear EFI boot services mappings when freeing the memory - Harden efivars against callers that invoke it on non-EFI boots - Reduce the number of memblock reservations resulting from extensive use of the new efi_mem_reserve_persistent() API - Other assorted fixes and cleanups" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Don't unmap EFI boot services code/data regions for EFI_OLD_MEMMAP and EFI_MIXED_MODE efi: Reduce the amount of memblock reservations for persistent allocations efi: Permit multiple entries in persistent memreserve data structure efi/libstub: Disable some warnings for x86{,_64} x86/efi: Move efi_<reserve/free>_boot_services() to arch/x86 x86/efi: Unmap EFI boot services code/data regions from efi_pgd x86/mm/pageattr: Introduce helper function to unmap EFI boot services efi/fdt: Simplify the get_fdt() flow efi/fdt: Indentation fix firmware/efi: Add NULL pointer checks in efivars API functions
2018-12-26Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The biggest RCU changes in this cycle were: - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar. - Replace calls of RCU-bh and RCU-sched update-side functions to their vanilla RCU counterparts. This series is a step towards complete removal of the RCU-bh and RCU-sched update-side functions. ( Note that some of these conversions are going upstream via their respective maintainers. ) - Documentation updates, including a number of flavor-consolidation updates from Joel Fernandes. - Miscellaneous fixes. - Automate generation of the initrd filesystem used for rcutorture testing. - Convert spin_is_locked() assertions to instead use lockdep. ( Note that some of these conversions are going upstream via their respective maintainers. ) - SRCU updates, especially including a fix from Dennis Krein for a bag-on-head-class bug. - RCU torture-test updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits) rcutorture: Don't do busted forward-progress testing rcutorture: Use 100ms buckets for forward-progress callback histograms rcutorture: Recover from OOM during forward-progress tests rcutorture: Print forward-progress test age upon failure rcutorture: Print time since GP end upon forward-progress failure rcutorture: Print histogram of CB invocation at OOM time rcutorture: Print GP age upon forward-progress failure rcu: Print per-CPU callback counts for forward-progress failures rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings rcutorture: Dump grace-period diagnostics upon forward-progress OOM rcutorture: Prepare for asynchronous access to rcu_fwd_startat torture: Remove unnecessary "ret" variables rcutorture: Affinity forward-progress test to avoid housekeeping CPUs rcutorture: Break up too-long rcu_torture_fwd_prog() function rcutorture: Remove cbflood facility torture: Bring any extra CPUs online during kernel startup rcutorture: Add call_rcu() flooding forward-progress tests rcutorture/formal: Replace synchronize_sched() with synchronize_rcu() tools/kernel.h: Replace synchronize_sched() with synchronize_rcu() net/decnet: Replace rcu_barrier_bh() with rcu_barrier() ...
2018-12-14psi: fix reference to kernel commandline enableBaruch Siach1-2/+2
The kernel commandline parameter named in CONFIG_PSI_DEFAULT_DISABLED help text contradicts the documentation in kernel-parameters.txt, and the code. Fix that. Link: http://lkml.kernel.org/r/20181203213416.GA12627@cmpxchg.org Fixes: e0c274472d ("psi: make disabling/enabling easier for vendor kernels") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-04Merge tag 'v4.20-rc5' into for-4.21/blockJens Axboe2-10/+21
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and also getting the merge fix that went into mainline that users are hitting testing for-4.21/block and/or for-next. * tag 'v4.20-rc5': (664 commits) Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace psi: make disabling/enabling easier for vendor kernels proc: fixup map_files test on arm debugobjects: avoid recursive calls with kmemleak userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set ...
2018-12-04Merge branch 'for-mingo' of ↵Ingo Molnar1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU changes from Paul E. McKenney: - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar. - Replace calls of RCU-bh and RCU-sched update-side functions to their vanilla RCU counterparts. This series is a step towards complete removal of the RCU-bh and RCU-sched update-side functions. ( Note that some of these conversions are going upstream via their respective maintainers. ) - Documentation updates, including a number of flavor-consolidation updates from Joel Fernandes. - Miscellaneous fixes. - Automate generation of the initrd filesystem used for rcutorture testing. - Convert spin_is_locked() assertions to instead use lockdep. ( Note that some of these conversions are going upstream via their respective maintainers. ) - SRCU updates, especially including a fix from Dennis Krein for a bag-on-head-class bug. - RCU torture-test updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-30initramfs: clean old path before creating a hardlinkLi Zhijian1-10/+12
sys_link() can fail due to the new path already existing. This case ofen occurs when we use a concated initrd, for example: 1) prepare a basic rootfs, it contains a regular files rc.local lizhijian@:~/yocto-tiny-i386-2016-04-22$ cat etc/rc.local #!/bin/sh echo "Running /etc/rc.local..." yocto-tiny-i386-2016-04-22$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rootfs.cgz 2) create a extra initrd which also includes a etc/rc.local lizhijian@:~/lkp-x86_64/etc$ echo "append initrd" >rc.local lizhijian@:~/lkp/lkp-x86_64/etc$ cat rc.local append initrd lizhijian@:~/lkp/lkp-x86_64/etc$ ln rc.local rc.local.hardlink append initrd lizhijian@:~/lkp/lkp-x86_64/etc$ stat rc.local rc.local.hardlink File: 'rc.local' Size: 14 Blocks: 8 IO Block: 4096 regular file Device: 801h/2049d Inode: 11296086 Links: 2 Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian) Access: 2018-11-15 16:08:28.654464815 +0800 Modify: 2018-11-15 16:07:57.514903210 +0800 Change: 2018-11-15 16:08:24.180228872 +0800 Birth: - File: 'rc.local.hardlink' Size: 14 Blocks: 8 IO Block: 4096 regular file Device: 801h/2049d Inode: 11296086 Links: 2 Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian) Access: 2018-11-15 16:08:28.654464815 +0800 Modify: 2018-11-15 16:07:57.514903210 +0800 Change: 2018-11-15 16:08:24.180228872 +0800 Birth: - lizhijian@:~/lkp/lkp-x86_64$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rc-local.cgz lizhijian@:~/lkp/lkp-x86_64$ gzip -dc ../rc-local.cgz | cpio -t . etc etc/rc.local.hardlink <<< it will be extracted first at this initrd etc/rc.local 3) concate 2 initrds and boot lizhijian@:~/lkp$ cat rootfs.cgz rc-local.cgz >concate-initrd.cgz lizhijian@:~/lkp$ qemu-system-x86_64 -nographic -enable-kvm -cpu host -smp 1 -m 1024 -kernel ~/lkp/linux/arch/x86/boot/bzImage -append "console=ttyS0 earlyprint=ttyS0 ignore_loglevel" -initrd ./concate-initr.cgz -serial stdio -nodefaults In this case, sys_link(2) will fail and return -EEXIST, so we can only get the rc.local at rootfs.cgz instead of rc-local.cgz [akpm@linux-foundation.org: move code to avoid forward declaration] Link: http://lkml.kernel.org/r/1542352368-13299-1-git-send-email-lizhijian@cn.fujitsu.com Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Philip Li <philip.li@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Li Zhijian <zhijianx.li@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30psi: make disabling/enabling easier for vendor kernelsJohannes Weiner1-0/+9
Mel Gorman reports a hackbench regression with psi that would prohibit shipping the suse kernel with it default-enabled, but he'd still like users to be able to opt in at little to no cost to others. With the current combination of CONFIG_PSI and the psi_disabled bool set from the commandline, this is a challenge. Do the following things to make it easier: 1. Add a config option CONFIG_PSI_DEFAULT_DISABLED that allows distros to enable CONFIG_PSI in their kernel but leave the feature disabled unless a user requests it at boot-time. To avoid double negatives, rename psi_disabled= to psi=. 2. Make psi_disabled a static branch to eliminate any branch costs when the feature is disabled. In terms of numbers before and after this patch, Mel says: : The following is a comparision using CONFIG_PSI=n as a baseline against : your patch and a vanilla kernel : : 4.20.0-rc4 4.20.0-rc4 4.20.0-rc4 : kconfigdisable-v1r1 vanilla psidisable-v1r1 : Amean 1 1.3100 ( 0.00%) 1.3923 ( -6.28%) 1.3427 ( -2.49%) : Amean 3 3.8860 ( 0.00%) 4.1230 * -6.10%* 3.8860 ( -0.00%) : Amean 5 6.8847 ( 0.00%) 8.0390 * -16.77%* 6.7727 ( 1.63%) : Amean 7 9.9310 ( 0.00%) 10.8367 * -9.12%* 9.9910 ( -0.60%) : Amean 12 16.6577 ( 0.00%) 18.2363 * -9.48%* 17.1083 ( -2.71%) : Amean 18 26.5133 ( 0.00%) 27.8833 * -5.17%* 25.7663 ( 2.82%) : Amean 24 34.3003 ( 0.00%) 34.6830 ( -1.12%) 32.0450 ( 6.58%) : Amean 30 40.0063 ( 0.00%) 40.5800 ( -1.43%) 41.5087 ( -3.76%) : Amean 32 40.1407 ( 0.00%) 41.2273 ( -2.71%) 39.9417 ( 0.50%) : : It's showing that the vanilla kernel takes a hit (as the bisection : indicated it would) and that disabling PSI by default is reasonably : close in terms of performance for this particular workload on this : particular machine so; Link: http://lkml.kernel.org/r/20181127165329.GA29728@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30x86/efi: Move efi_<reserve/free>_boot_services() to arch/x86Sai Praneeth Prakhya1-4/+0
efi_<reserve/free>_boot_services() are x86 specific quirks and as such should be in asm/efi.h, so move them from linux/efi.h. Also, call efi_free_boot_services() from __efi_enter_virtual_mode() as it is x86 specific call and ideally shouldn't be part of init/main.c Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jon Hunter <jonathanh@nvidia.com> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: YiFei Zhu <zhuyifei1999@gmail.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-7-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-27main: Replace rcu_barrier_sched() with rcu_barrier()Paul E. McKenney1-3/+3
Now that all RCU flavors have been consolidated, rcu_barrier_sched() is but a synonym for rcu_barrier(). This commit therefore replaces the former with the latter. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <linux-mm@kvack.org>
2018-11-19audit: remove WATCH and TREE config optionsRichard Guy Briggs1-9/+0
Remove the CONFIG_AUDIT_WATCH and CONFIG_AUDIT_TREE config options since they are both dependent on CONFIG_AUDITSYSCALL and force CONFIG_FSNOTIFY. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-11-07block: remove dead elevator codeJens Axboe3-21/+0
This removes a bunch of core and elevator related code. On the core front, we remove anything related to queue running, draining, initialization, plugging, and congestions. We also kill anything related to request allocation, merging, retrieval, and completion. Remove any checking for single queue IO schedulers, as they no longer exist. This means we can also delete a bunch of code related to request issue, adding, completion, etc - and all the SQ related ops and helpers. Also kill the load_default_modules(), as all that did was provide for a way to load the default single queue elevator. Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-31memblock: stop using implicit alignment to SMP_CACHE_BYTESMike Rapoport1-5/+8
When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: replace alloc_bootmem with memblock_allocMike Rapoport1-2/+2
The alloc_bootmem(size) is a shortcut for allocation of SMP_CACHE_BYTES aligned memory. When the align parameter of memblock_alloc() is 0, the alignment is implicitly set to SMP_CACHE_BYTES and thus alloc_bootmem(size) and memblock_alloc(size, 0) are equivalent. The conversion is done using the following semantic patch: @@ expression size; @@ - alloc_bootmem(size) + memblock_alloc(size, 0) Link: http://lkml.kernel.org/r/1536927045-23536-22-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: remove _virt from APIs returning virtual addressMike Rapoport1-3/+3
The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31init/do_mounts.c: add root=PARTLABEL=<name> supportNikolaus Voss1-0/+31
Support referencing the root partition label from GPT as argument to the root= option on the kernel command line in analogy to referencing the partition uuid as root=PARTUUID=<uuid>. Specifying the partition label instead of the uuid is often much easier, e.g. in embedded environments when there is an A/B rootfs partition scheme for interruptible firmware updates (i.e. rootfsA/ rootfsB). The partition label can be queried with the blkid command. Link: http://lkml.kernel.org/r/20180822060904.828E510665E@pc-niv.weinmann.com Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Sasha Levin <Alexander.Levin@microsoft.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26psi: cgroup supportJohannes Weiner1-0/+4
On a system that executes multiple cgrouped jobs and independent workloads, we don't just care about the health of the overall system, but also that of individual jobs, so that we can ensure individual job health, fairness between jobs, or prioritize some jobs over others. This patch implements pressure stall tracking for cgroups. In kernels with CONFIG_PSI=y, cgroup2 groups will have cpu.pressure, memory.pressure, and io.pressure files that track aggregate pressure stall times for only the tasks inside the cgroup. Link: http://lkml.kernel.org/r/20180828172258.3185-10-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26psi: pressure stall information for CPU, memory, and IOJohannes Weiner1-0/+15
When systems are overcommitted and resources become contended, it's hard to tell exactly the impact this has on workload productivity, or how close the system is to lockups and OOM kills. In particular, when machines work multiple jobs concurrently, the impact of overcommit in terms of latency and throughput on the individual job can be enormous. In order to maximize hardware utilization without sacrificing individual job health or risk complete machine lockups, this patch implements a way to quantify resource pressure in the system. A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that expose the percentage of time the system is stalled on CPU, memory, or IO, respectively. Stall states are aggregate versions of the per-task delay accounting delays: cpu: some tasks are runnable but not executing on a CPU memory: tasks are reclaiming, or waiting for swapin or thrashing cache io: tasks are waiting for io completions These percentages of walltime can be thought of as pressure percentages, and they give a general sense of system health and productivity loss incurred by resource overcommit. They can also indicate when the system is approaching lockup scenarios and OOMs. To do this, psi keeps track of the task states associated with each CPU and samples the time they spend in stall states. Every 2 seconds, the samples are averaged across CPUs - weighted by the CPUs' non-idle time to eliminate artifacts from unused CPUs - and translated into percentages of walltime. A running average of those percentages is maintained over 10s, 1m, and 5m periods (similar to the loadaverage). [hannes@cmpxchg.org: doc fixlet, per Randy] Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org [hannes@cmpxchg.org: code optimization] Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org [hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter] Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org [hannes@cmpxchg.org: fix build] Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-23Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes are: - Migrate CPU-intense 'misfit' tasks on asymmetric capacity systems, to better utilize (much) faster 'big core' CPUs. (Morten Rasmussen, Valentin Schneider) - Topology handling improvements, in particular when CPU capacity changes and related load-balancing fixes/improvements (Morten Rasmussen) - ... plus misc other improvements, fixes and updates" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) sched/completions/Documentation: Add recommendation for dynamic and ONSTACK completions sched/completions/Documentation: Clean up the document some more sched/completions/Documentation: Fix a couple of punctuation nits cpu/SMT: State SMT is disabled even with nosmt and without "=force" sched/core: Fix comment regarding nr_iowait_cpu() and get_iowait_load() sched/fair: Remove setting task's se->runnable_weight during PELT update sched/fair: Disable LB_BIAS by default sched/pelt: Fix warning and clean up IRQ PELT config sched/topology: Make local variables static sched/debug: Use symbolic names for task state constants sched/numa: Remove unused numa_stats::nr_running field sched/numa: Remove unused code from update_numa_stats() sched/debug: Explicitly cast sched_feat() to bool sched/core: Disable SD_PREFER_SIBLING on asymmetric CPU capacity domains sched/fair: Don't move tasks to lower capacity CPUs unless necessary sched/fair: Set rq->rd->overload when misfit sched/fair: Wrap rq->rd->overload accesses with READ/WRITE_ONCE() sched/core: Change root_domain->overload type to int sched/fair: Change 'prefer_sibling' type to bool sched/fair: Kick nohz balance if rq->misfit_task_load ...
2018-10-23Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking and misc x86 updates from Ingo Molnar: "Lots of changes in this cycle - in part because locking/core attracted a number of related x86 low level work which was easier to handle in a single tree: - Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E. McKenney, Andrea Parri) - lockdep scalability improvements and micro-optimizations (Waiman Long) - rwsem improvements (Waiman Long) - spinlock micro-optimization (Matthew Wilcox) - qspinlocks: Provide a liveness guarantee (more fairness) on x86. (Peter Zijlstra) - Add support for relative references in jump tables on arm64, x86 and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens) - Be a lot less permissive on weird (kernel address) uaccess faults on x86: BUG() when uaccess helpers fault on kernel addresses (Jann Horn) - macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav Amit) - ... and a handful of other smaller changes as well" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) locking/lockdep: Make global debug_locks* variables read-mostly locking/lockdep: Fix debug_locks off performance problem locking/pvqspinlock: Extend node size when pvqspinlock is configured locking/qspinlock_stat: Count instances of nested lock slowpaths locking/qspinlock, x86: Provide liveness guarantee x86/asm: 'Simplify' GEN_*_RMWcc() macros locking/qspinlock: Rework some comments locking/qspinlock: Re-order code locking/lockdep: Remove duplicated 'lock_class_ops' percpu array x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y futex: Replace spin_is_locked() with lockdep locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs x86/extable: Macrofy inline assembly code to work around GCC inlining bugs x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs x86/refcount: Work around GCC inlining bug x86/objtool: Use asm macros to work around GCC inlining bugs ...
2018-10-09init: add arch_call_rest_init to allow stack switchingMartin Schwidefsky1-2/+7
With CONFIG_VMAP_STACK=y the kernel stack of all tasks should be allocated in the vmalloc space. The initial stack used for all the early init code is in the init_thread_union. To be able to switch from this early stack to a properly allocated stack from vmalloc the architecture needs a switch-over point. Introduce the arch_call_rest_init() function with a weak definition in init/main.c with the only purpose to call rest_init() from the end of start_kernel(). The architecture override can then do the necessary magic to switch to the new vmalloc'ed stack. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-02sched/pelt: Fix warning and clean up IRQ PELT configVincent Guittot1-0/+5
Create a config for enabling irq load tracking in the scheduler. irq load tracking is useful only when irq or paravirtual time is accounted but it's only possible with SMP for now. Also use __maybe_unused to remove the compilation warning in update_rq_clock_task() that has been introduced by: 2e62c4743adc ("sched/fair: Remove #ifdefs from scale_rt_capacity()") Suggested-by: Ingo Molnar <mingo@redhat.com> Reported-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: dou_liyang@163.com Fixes: 2e62c4743adc ("sched/fair: Remove #ifdefs from scale_rt_capacity()") Link: http://lkml.kernel.org/r/1537867062-27285-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-27jump_label: Annotate entries that operate on __init code earlierArd Biesheuvel1-1/+0
Jump table entries are mostly read-only, with the exception of the init and module loader code that defuses entries that point into init code when the code being referred to is freed. For robustness, it would be better to move these entries into the ro_after_init section, but clearing the 'code' member of each jump table entry referring to init code at module load time races with the module_enable_ro() call that remaps the ro_after_init section read only, so we'd like to do it earlier. So given that whether such an entry refers to init code can be decided much earlier, we can pull this check forward. Since we may still need the code entry at this point, let's switch to setting a low bit in the 'key' member just like we do to annotate the default state of a jump table entry. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jessica Yu <jeyu@kernel.org> Link: https://lkml.kernel.org/r/20180919065144.25010-8-ard.biesheuvel@linaro.org
2018-08-25Merge tag 'kbuild-v4.19-2' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add build_{menu,n,g,x}config targets for compile-testing Kconfig - fix and improve recursive dependency detection in Kconfig - fix parallel building of menuconfig/nconfig - fix syntax error in clang-version.sh - suppress distracting log from syncconfig - remove obsolete "rpm" target - remove VMLINUX_SYMBOL(_STR) macro entirely - fix microblaze build with CONFIG_DYNAMIC_FTRACE - move compiler test for dead code/data elimination to Kconfig - rename well-known LDFLAGS variable to KBUILD_LDFLAGS - misc fixes and cleanups * tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rename LDFLAGS to KBUILD_LDFLAGS kbuild: pass LDFLAGS to recordmcount.pl kbuild: test dead code/data elimination support in Kconfig initramfs: move gen_initramfs_list.sh from scripts/ to usr/ vmlinux.lds.h: remove stale <linux/export.h> include export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci kbuild: make sorting initramfs contents independent of locale kbuild: remove "rpm" target, which is alias of "rpm-pkg" kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt kconfig: suppress "configuration written to .config" for syncconfig kconfig: fix "Can't open ..." in parallel build kbuild: Add a space after `!` to prevent parsing as file pattern scripts: modpost: check memory allocation results kconfig: improve the recursive dependency report kconfig: report recursive dependency involving 'imply' kconfig: error out when seeing recursive dependency kconfig: add build-only configurator targets scripts/dtc: consolidate include path options in Makefile
2018-08-24kbuild: test dead code/data elimination support in KconfigMasahiro Yamada1-0/+2
This config option should be enabled only when both the compiler and the linker support necessary flags. Add proper dependencies to Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds7-80/+31
Merge more updates from Andrew Morton: - the rest of MM - procfs updates - various misc things - more y2038 fixes - get_maintainer updates - lib/ updates - checkpatch updates - various epoll updates - autofs updates - hfsplus - some reiserfs work - fatfs updates - signal.c cleanups - ipc/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (166 commits) ipc/util.c: update return value of ipc_getref from int to bool ipc/util.c: further variable name cleanups ipc: simplify ipc initialization ipc: get rid of ids->tables_initialized hack lib/rhashtable: guarantee initial hashtable allocation lib/rhashtable: simplify bucket_table_alloc() ipc: drop ipc_lock() ipc/util.c: correct comment in ipc_obtain_object_check ipc: rename ipcctl_pre_down_nolock() ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid() ipc: reorganize initialization of kern_ipc_perm.seq ipc: compute kern_ipc_perm.id under the ipc lock init/Kconfig: remove EXPERT from CHECKPOINT_RESTORE fs/sysv/inode.c: use ktime_get_real_seconds() for superblock stamp adfs: use timespec64 for time conversion kernel/sysctl.c: fix typos in comments drivers/rapidio/devices/rio_mport_cdev.c: remove redundant pointer md fork: don't copy inconsistent signal handler state to child signal: make get_signal() return bool signal: make sigkill_pending() return bool ...
2018-08-22init/Kconfig: remove EXPERT from CHECKPOINT_RESTOREAdrian Reber1-12/+12
The CHECKPOINT_RESTORE configuration option was introduced in 2012 and combined with EXPERT. CHECKPOINT_RESTORE is already enabled in many distribution kernels and also part of the defconfigs of various architectures. To make it easier for distributions to enable CHECKPOINT_RESTORE this removes EXPERT and moves the configuration option out of the EXPERT block. Link: http://lkml.kernel.org/r/20180712130733.11510-1-adrian@lisas.de Signed-off-by: Adrian Reber <adrian@lisas.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22init/main.c: log init process file namePaul Menzel1-0/+1
Add a log message to `run_init_process()`. This log message serves two purposes. 1. If the init process is not specified on the Linux Kernel command line, the user sees, what file was chosen. 2. The time stamps shows exactly, when the Linux kernel handed over control to the init process. Link: http://lkml.kernel.org/r/b1fc97fa-4aa9-1904-ddb5-859e78995c41@molgen.mpg.de Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22init/Kconfig: fix its typosRandy Dunlap1-2/+2
Correct typos of "it's" to "its. Link: http://lkml.kernel.org/r/0ac627b6-5527-55f4-0489-1631aa34fc11@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22init/: remove ineffective sparse disablingLuc Van Oostenryck5-50/+0
Sparse checking used to be disabled on init/do_mounts.c and a few related files because "Many of the syscalls used in this file expect some of the arguments to be __user pointers not __kernel pointers". However since 28128c61e ("kconfig.h: Include compiler types to avoid missed struct attributes") the checks are, in fact, not disabled anymore because of the more early include of "linux/compiler_types.h" So remove the now ineffective #undefery that was done to disable these warnings, as well as the associated comment. Link: http://lkml.kernel.org/r/20180617115355.53799-1-luc.vanoostenryck@gmail.com Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22init: allow initcall tables to be emitted using relative referencesArd Biesheuvel1-16/+16
Allow the initcall tables to be emitted using relative references that are only half the size on 64-bit architectures and don't require fixups at runtime on relocatable kernels. Link: http://lkml.kernel.org/r/20180704083651.24360-5-ard.biesheuvel@linaro.org Acked-by: James Morris <james.morris@microsoft.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Petr Mladek <pmladek@suse.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <jmorris@namei.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-21Merge branch 'siginfo-linus' of ↵Linus Torvalds1-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull core signal handling updates from Eric Biederman: "It was observed that a periodic timer in combination with a sufficiently expensive fork could prevent fork from every completing. This contains the changes to remove the need for that restart. This set of changes is split into several parts: - The first part makes PIDTYPE_TGID a proper pid type instead something only for very special cases. The part starts using PIDTYPE_TGID enough so that in __send_signal where signals are actually delivered we know if the signal is being sent to a a group of processes or just a single process. - With that prep work out of the way the logic in fork is modified so that fork logically makes signals received while it is running appear to be received after the fork completes" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits) signal: Don't send signals to tasks that don't exist signal: Don't restart fork when signals come in. fork: Have new threads join on-going signal group stops fork: Skip setting TIF_SIGPENDING in ptrace_init_task signal: Add calculate_sigpending() fork: Unconditionally exit if a fatal signal is pending fork: Move and describe why the code examines PIDNS_ADDING signal: Push pid type down into complete_signal. signal: Push pid type down into __send_signal signal: Push pid type down into send_signal signal: Pass pid type into do_send_sig_info signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task signal: Pass pid type into group_send_sig_info signal: Pass pid and pid type into send_sigqueue posix-timers: Noralize good_sigevent signal: Use PIDTYPE_TGID to clearly store where file signals will be sent pid: Implement PIDTYPE_TGID pids: Move the pgrp and session pid pointers from task_struct to signal_struct kvm: Don't open code task_pid in kvm_vcpu_ioctl pids: Compute task_tgid using signal->leader_pid ...
2018-08-20Merge tag 'trace-v4.19' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Restructure of lockdep and latency tracers This is the biggest change. Joel Fernandes restructured the hooks from irqs and preemption disabling and enabling. He got rid of a lot of the preprocessor #ifdef mess that they caused. He turned both lockdep and the latency tracers to use trace events inserted in the preempt/irqs disabling paths. But unfortunately, these started to cause issues in corner cases. Thus, parts of the code was reverted back to where lockdep and the latency tracers just get called directly (without using the trace events). But because the original change cleaned up the code very nicely we kept that, as well as the trace events for preempt and irqs disabling, but they are limited to not being called in NMIs. - Have trace events use SRCU for "rcu idle" calls. This was required for the preempt/irqs off trace events. But it also had to not allow them to be called in NMI context. Waiting till Paul makes an NMI safe SRCU API. - New notrace SRCU API to allow trace events to use SRCU. - Addition of mcount-nop option support - SPDX headers replacing GPL templates. - Various other fixes and clean ups. - Some fixes are marked for stable, but were not fully tested before the merge window opened. * tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) tracing: Fix SPDX format headers to use C++ style comments tracing: Add SPDX License format tags to tracing files tracing: Add SPDX License format to bpf_trace.c blktrace: Add SPDX License format header s390/ftrace: Add -mfentry and -mnop-mcount support tracing: Add -mcount-nop option support tracing: Avoid calling cc-option -mrecord-mcount for every Makefile tracing: Handle CC_FLAGS_FTRACE more accurately Uprobe: Additional argument arch_uprobe to uprobe_write_opcode() Uprobes: Simplify uprobe_register() body tracepoints: Free early tracepoints after RCU is initialized uprobes: Use synchronize_rcu() not synchronize_sched() tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister() ftrace: Remove unused pointer ftrace_swapper_pid tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing/irqsoff: Handle preempt_count for different configs tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing: irqsoff: Account for additional preempt_disable trace: Use rcu_dereference_raw for hooks from trace-event subsystem tracing/kprobes: Fix within_notrace_func() to check only notrace functions ...
2018-08-17mm: introduce CONFIG_MEMCG_KMEM as combination of CONFIG_MEMCG && !CONFIG_SLOBKirill Tkhai1-0/+5
Introduce new config option, which is used to replace repeating CONFIG_MEMCG && !CONFIG_SLOB pattern. Next patches add a little more memcg+kmem related code, so let's keep the defines more clearly. Link: http://lkml.kernel.org/r/153063053670.1818.15013136946600481138.stgit@localhost.localdomain Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Tested-by: Shakeel Butt <shakeelb@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Josef Bacik <jbacik@fb.com> Cc: Li RongQing <lirongqing@baidu.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Roman Gushchin <guro@fb.com> Cc: Sahitya Tummala <stummala@codeaurora.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-15Merge tag 'kconfig-v4.19-2' of ↵Linus Torvalds1-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig consolidation from Masahiro Yamada: "Consolidation of Kconfig files by Christoph Hellwig. Move the source statements of arch-independent Kconfig files instead of duplicating the includes in every arch/$(SRCARCH)/Kconfig" * tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: add a Memory Management options" menu kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt kconfig: use a menu in arch/Kconfig to reduce clutter kconfig: include kernel/Kconfig.preempt from init/Kconfig Kconfig: consolidate the "Kernel hacking" menu kconfig: include common Kconfig files from top-level Kconfig kconfig: remove duplicate SWAP symbol defintions um: create a proper drivers Kconfig um: cleanup Kconfig files um: stop abusing KBUILD_KCONFIG
2018-08-15Merge tag 'kconfig-v4.19' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - show clearer error messages where pkg-config is needed, but not installed - rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics - create all necessary directories by Kconfig tool itself instead of Makefile - update the .config unconditionally when syncconfig is invoked - use 'include' directive instead of '-include' where include/config/{auto,tristate}.conf is mandatory - do not try to update the .config when running install targets - add .DELETE_ON_ERROR to delete partially updated files - misc cleanups and fixes * tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove P_ENV property type kconfig: remove unused sym_get_env_prop() function kconfig: fix the rule of mainmenu_stmt symbol init/Kconfig: Use short unix-style option instead of --longname Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatory kbuild: remove auto.conf from prerequisite of phony targets kbuild: do not update config for 'make kernelrelease' kbuild: do not update config when running install targets kbuild: add .DELETE_ON_ERROR special target kbuild: use 'include' directive to load auto.conf from top Makefile kconfig: allow all config targets to write auto.conf if missing kconfig: make syncconfig update .config regardless of sym_change_count kconfig: create directories needed for syncconfig by itself kconfig: remove unneeded directory generation from local*config kconfig: split out useful helpers in confdata.c kconfig: rename file_write_dep and move it to confdata.c kconfig: fix typos in description of "choice" in kconfig-language.txt kconfig: handle format string before calling conf_message_callback() kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE kconfig: check for pkg-config on make {menu,n,g,x}config
2018-08-15Merge tag 'kbuild-v4.19' of ↵Linus Torvalds2-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - verify depmod is installed before modules_install - support build salt in case build ids must be unique between builds - allow users to specify additional host compiler flags via HOST*FLAGS, and rename internal variables to KBUILD_HOST*FLAGS - update buildtar script to drop vax support, add arm64 support - update builddeb script for better debarch support - document the pit-fall of if_changed usage - fix parallel build of UML with O= option - make 'samples' target depend on headers_install to fix build errors - remove deprecated host-progs variable - add a new coccinelle script for refcount_t vs atomic_t check - improve double-test coccinelle script - misc cleanups and fixes * tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) coccicheck: return proper error code on fail Coccinelle: doubletest: reduce side effect false positives kbuild: remove deprecated host-progs variable kbuild: make samples really depend on headers_install um: clean up archheaders recipe kbuild: add %asm-generic to no-dot-config-targets um: fix parallel building with O= option scripts: Add Python 3 support to tracing/draw_functrace.py builddeb: Add automatic support for sh{3,4}{,eb} architectures builddeb: Add automatic support for riscv* architectures builddeb: Add automatic support for m68k architecture builddeb: Add automatic support for or1k architecture builddeb: Add automatic support for sparc64 architecture builddeb: Add automatic support for mips{,64}r6{,el} architectures builddeb: Add automatic support for mips64el architecture builddeb: Add automatic support for ppc64 and powerpcspe architectures builddeb: Introduce functions to simplify kconfig tests in set_debarch builddeb: Drop check for 32-bit s390 builddeb: Change architecture detection fallback to use dpkg-architecture builddeb: Skip architecture detection when KBUILD_DEBARCH is set ...
2018-08-13Merge branch 'for-linus' of ↵Linus Torvalds1-1/+14
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: "Since Martin is on vacation you get the s390 pull request from me: - Host large page support for KVM guests. As the patches have large impact on arch/s390/mm/ this series goes out via both the KVM and the s390 tree. - Add an option for no compression to the "Kernel compression mode" menu, this will come in handy with the rework of the early boot code. - A large rework of the early boot code that will make life easier for KASAN and KASLR. With the rework the bootable uncompressed image is not generated anymore, only the bzImage is available. For debuggung purposes the new "no compression" option is used. - Re-enable the gcc plugins as the issue with the latent entropy plugin is solved with the early boot code rework. - More spectre relates changes: + Detect the etoken facility and remove expolines automatically. + Add expolines to a few more indirect branches. - A rewrite of the common I/O layer trace points to make them consumable by 'perf stat'. - Add support for format-3 PCI function measurement blocks. - Changes for the zcrypt driver: + Add attributes to indicate the load of cards and queues. + Restructure some code for the upcoming AP device support in KVM. - Build flags improvements in various Makefiles. - A few fixes for the kdump support. - A couple of patches for gcc 8 compile warning cleanup. - Cleanup s390 specific proc handlers. - Add s390 support to the restartable sequence self tests. - Some PTR_RET vs PTR_ERR_OR_ZERO cleanup. - Lots of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (107 commits) s390/dasd: fix hanging offline processing due to canceled worker s390/dasd: fix panic for failed online processing s390/mm: fix addressing exception after suspend/resume rseq/selftests: add s390 support s390: fix br_r1_trampoline for machines without exrl s390/lib: use expoline for all bcr instructions s390/numa: move initial setup of node_to_cpumask_map s390/kdump: Fix elfcorehdr size calculation s390/cpum_sf: save TOD clock base in SDBs for time conversion KVM: s390: Add huge page enablement control s390/mm: Add huge page gmap linking support s390/mm: hugetlb pages within a gmap can not be freed KVM: s390: Add skey emulation fault handling s390/mm: Add huge pmd storage key handling s390/mm: Clear skeys for newly mapped huge guest pmds s390/mm: Clear huge page storage keys on enable_skey s390/mm: Add huge page dirty sync support s390/mm: Add gmap pmd invalidation and clearing s390/mm: Add gmap pmd notification bit setting s390/mm: Add gmap pmd linking ...
2018-08-13Merge branch 'x86-timers-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 timer updates from Thomas Gleixner: "Early TSC based time stamping to allow better boot time analysis. This comes with a general cleanup of the TSC calibration code which grew warts and duct taping over the years and removes 250 lines of code. Initiated and mostly implemented by Pavel with help from various folks" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) x86/kvmclock: Mark kvm_get_preset_lpj() as __init x86/tsc: Consolidate init code sched/clock: Disable interrupts when calling generic_sched_clock_init() timekeeping: Prevent false warning when persistent clock is not available sched/clock: Close a hole in sched_clock_init() x86/tsc: Make use of tsc_calibrate_cpu_early() x86/tsc: Split native_calibrate_cpu() into early and late parts sched/clock: Use static key for sched_clock_running sched/clock: Enable sched clock early sched/clock: Move sched clock initialization and merge with generic clock x86/tsc: Use TSC as sched clock early x86/tsc: Initialize cyc2ns when tsc frequency is determined x86/tsc: Calibrate tsc only once ARM/time: Remove read_boot_clock64() s390/time: Remove read_boot_clock64() timekeeping: Default boot time offset to local_clock() timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset() s390/time: Add read_persistent_wall_and_boot_offset() x86/xen/time: Output xen sched_clock time from 0 x86/xen/time: Initialize pv xen time in init_hypervisor_platform() ...
2018-08-13Merge branch 'x86/pti' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-0/+7
Pull x86 PTI updates from Thomas Gleixner: "The Speck brigade sadly provides yet another large set of patches destroying the perfomance which we carefully built and preserved - PTI support for 32bit PAE. The missing counter part to the 64bit PTI code implemented by Joerg. - A set of fixes for the Global Bit mechanics for non PCID CPUs which were setting the Global Bit too widely and therefore possibly exposing interesting memory needlessly. - Protection against userspace-userspace SpectreRSB - Support for the upcoming Enhanced IBRS mode, which is preferred over IBRS. Unfortunately we dont know the performance impact of this, but it's expected to be less horrible than the IBRS hammering. - Cleanups and simplifications" * 'x86/pti' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) x86/mm/pti: Move user W+X check into pti_finalize() x86/relocs: Add __end_rodata_aligned to S_REL x86/mm/pti: Clone kernel-image on PTE level for 32 bit x86/mm/pti: Don't clear permissions in pti_clone_pmd() x86/mm/pti: Fix 32 bit PCID check x86/mm/init: Remove freed kernel image areas from alias mapping x86/mm/init: Add helper for freeing kernel image pages x86/mm/init: Pass unconverted symbol addresses to free_init_pages() mm: Allow non-direct-map arguments to free_reserved_area() x86/mm/pti: Clear Global bit more aggressively x86/speculation: Support Enhanced IBRS on future CPUs x86/speculation: Protect against userspace-userspace spectreRSB x86/kexec: Allocate 8k PGDs for PTI Revert "perf/core: Make sure the ring-buffer is mapped in all page-tables" x86/mm: Remove in_nmi() warning from vmalloc_fault() x86/entry/32: Check for VM86 mode in slow-path check perf/core: Make sure the ring-buffer is mapped in all page-tables x86/pti: Check the return value of pti_user_pagetable_walk_pmd() x86/pti: Check the return value of pti_user_pagetable_walk_p4d() x86/entry/32: Add debug code to check entry/exit CR3 ...
2018-08-12init: rename and re-order boot_cpu_state_init()Linus Torvalds1-1/+1
This is purely a preparatory patch for upcoming changes during the 4.19 merge window. We have a function called "boot_cpu_state_init()" that isn't really about the bootup cpu state: that is done much earlier by the similarly named "boot_cpu_init()" (note lack of "state" in name). This function initializes some hotplug CPU state, and needs to run after the percpu data has been properly initialized. It even has a comment to that effect. Except it _doesn't_ actually run after the percpu data has been properly initialized. On x86 it happens to do that, but on at least arm and arm64, the percpu base pointers are initialized by the arch-specific 'smp_prepare_boot_cpu()' hook, which ran _after_ boot_cpu_state_init(). This had some unexpected results, and in particular we have a patch pending for the merge window that did the obvious cleanup of using 'this_cpu_write()' in the cpu hotplug init code: - per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE; + this_cpu_write(cpuhp_state.state, CPUHP_ONLINE); which is obviously the right thing to do. Except because of the ordering issue, it actually failed miserably and unexpectedly on arm64. So this just fixes the ordering, and changes the name of the function to be 'boot_cpu_hotplug_init()' to make it obvious that it's about cpu hotplug state, because the core CPU state was supposed to have already been done earlier. Marked for stable, since the (not yet merged) patch that will show this problem is marked for stable. Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-10tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and ↵Steven Rostedt (VMware)1-2/+0
unify their usage" Joel Fernandes created a nice patch that cleaned up the duplicate hooks used by lockdep and irqsoff latency tracer. It made both use tracepoints. But it caused lockdep to trigger several false positives. We have not figured out why yet, but removing lockdep from using the trace event hooks and just call its helper functions directly (like it use to), makes the problem go away. This is a partial revert of the clean up patch c3bc8fd637a9 ("tracing: Centralize preemptirq tracepoints and unify their usage") that adds direct calls for lockdep, but also keeps most of the clean up done to get rid of the horrible preprocessor if statements. Link: http://lkml.kernel.org/r/20180806155058.5ee875f4@gandalf.local.home Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Fixes: c3bc8fd637a9 ("tracing: Centralize preemptirq tracepoints and unify their usage") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-09signal: Don't restart fork when signals come in.Eric W. Biederman1-0/+1
Wen Yang <wen.yang99@zte.com.cn> and majiang <ma.jiang@zte.com.cn> report that a periodic signal received during fork can cause fork to continually restart preventing an application from making progress. The code was being overly pessimistic. Fork needs to guarantee that a signal sent to multiple processes is logically delivered before the fork and just to the forking process or logically delivered after the fork to both the forking process and it's newly spawned child. For signals like periodic timers that are always delivered to a single process fork can safely complete and let them appear to logically delivered after the fork(). While examining this issue I also discovered that fork today will miss signals delivered to multiple processes during the fork and handled by another thread. Similarly the current code will also miss blocked signals that are delivered to multiple process, as those signals will not appear pending during fork. Add a list of each thread that is currently forking, and keep on that list a signal set that records all of the signals sent to multiple processes. When fork completes initialize the new processes shared_pending signal set with it. The calculate_sigpending function will see those signals and set TIF_SIGPENDING causing the new task to take the slow path to userspace to handle those signals. Making it appear as if those signals were received immediately after the fork. It is not possible to send real time signals to multiple processes and exceptions don't go to multiple processes, which means that that are no signals sent to multiple processes that require siginfo. This means it is safe to not bother collecting siginfo on signals sent during fork. The sigaction of a child of fork is initially the same as the sigaction of the parent process. So a signal the parent ignores the child will also initially ignore. Therefore it is safe to ignore signals sent to multiple processes and ignored by the forking process. Signals sent to only a single process or only a single thread and delivered during fork are treated as if they are received after the fork, and generally not dealt with. They won't cause any problems. V2: Added removal from the multiprocess list on failure. V3: Use -ERESTARTNOINTR directly V4: - Don't queue both SIGCONT and SIGSTOP - Initialize signal_struct.multiprocess in init_task - Move setting of shared_pending to before the new task is visible to signals. This prevents signals from comming in before shared_pending.signal is set to delayed.signal and being lost. V5: - rework list add and delete to account for idle threads v6: - Use sigdelsetmask when removing stop signals Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200447 Reported-by: Wen Yang <wen.yang99@zte.com.cn> and Reported-by: majiang <ma.jiang@zte.com.cn> Fixes: 4a2c7a7837da ("[PATCH] make fork() atomic wrt pgrp/session signals") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-08-09init/Kconfig: Use short unix-style option instead of --longnameRob Landley1-2/+2
Avoids warning messages with the latest release of toybox, which never bothered to implement the --longopts nothing was using. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02kconfig: include kernel/Kconfig.preempt from init/KconfigChristoph Hellwig1-0/+1
Almost all architectures include it. Add a ARCH_NO_PREEMPT symbol to disable preempt support for alpha, hexagon, non-coldfire m68k and user mode Linux. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02kconfig: include common Kconfig files from top-level KconfigChristoph Hellwig1-2/+2
Instead of duplicating the source statements in every architecture just do it once in the toplevel Kconfig file. Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of the top-level Kconfig into arch/Kconfig so that don't violate ordering constraits while keeping a sensible menu structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02kconfig: remove duplicate SWAP symbol defintionsChristoph Hellwig1-1/+8
microblaze and nios2 define their own always n SWAP symbols. Remove those and let the generic defintion do the right thing by adding a new symbol to disable swap entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-31tracing: Centralize preemptirq tracepoints and unify their usageJoel Fernandes (Google)1-1/+4
This patch detaches the preemptirq tracepoints from the tracers and keeps it separate. Advantages: * Lockdep and irqsoff event can now run in parallel since they no longer have their own calls. * This unifies the usecase of adding hooks to an irqsoff and irqson event, and a preemptoff and preempton event. 3 users of the events exist: - Lockdep - irqsoff and preemptoff tracers - irqs and preempt trace events The unification cleans up several ifdefs and makes the code in preempt tracer and irqsoff tracers simpler. It gets rid of all the horrific ifdeferry around PROVE_LOCKING and makes configuration of the different users of the tracepoints more easy and understandable. It also gets rid of the time_* function calls from the lockdep hooks used to call into the preemptirq tracer which is not needed anymore. The negative delta in lines of code in this patch is quite large too. In the patch we introduce a new CONFIG option PREEMPTIRQ_TRACEPOINTS as a single point for registering probes onto the tracepoints. With this, the web of config options for preempt/irq toggle tracepoints and its users becomes: PREEMPT_TRACER PREEMPTIRQ_EVENTS IRQSOFF_TRACER PROVE_LOCKING | | \ | | \ (selects) / \ \ (selects) / TRACE_PREEMPT_TOGGLE ----> TRACE_IRQFLAGS \ / \ (depends on) / PREEMPTIRQ_TRACEPOINTS Other than the performance tests mentioned in the previous patch, I also ran the locking API test suite. I verified that all tests cases are passing. I also injected issues by not registering lockdep probes onto the tracepoints and I see failures to confirm that the probes are indeed working. This series + lockdep probes not registered (just to inject errors): [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/12:FAILED|FAILED| ok | [ 0.000000] sirq-safe-A => hirqs-on/21:FAILED|FAILED| ok | [ 0.000000] hard-safe-A + irqs-on/12:FAILED|FAILED| ok | [ 0.000000] soft-safe-A + irqs-on/12:FAILED|FAILED| ok | [ 0.000000] hard-safe-A + irqs-on/21:FAILED|FAILED| ok | [ 0.000000] soft-safe-A + irqs-on/21:FAILED|FAILED| ok | [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | With this series + lockdep probes registered, all locking tests pass: [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | Link: http://lkml.kernel.org/r/20180730222423.196630-4-joel@joelfernandes.org Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 22:21:55 +0000