summaryrefslogtreecommitdiffstats
path: root/init
AgeCommit message (Collapse)AuthorFilesLines
2018-04-05Merge tag 'gpio-v4.17-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.17 kernel cycle: New drivers: - Nintendo Wii GameCube GPIO, known as "Hollywood" - Raspberry Pi mailbox service GPIO expander - Spreadtrum main SC9860 SoC and IEC GPIO controllers. Improvements: - Implemented .get_multiple() callback for most of the high-performance industrial GPIO cards for the ISA bus. - ISA GPIO drivers now select the ISA_BUS_API instead of depending on it. This is merged with the same pattern for all the ISA drivers and some other Kconfig cleanups related to this. Cleanup: - Delete the TZ1090 GPIO drivers following the deletion of this SoC from the ARM tree. - Move the documentation over to driver-api to conform with the rest of the kernel documentation build. - Continue to make the GPIO drivers include only <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we want to get rid of. - Managed to remove VLA allocation from two drivers pending more fixes in this area for the next merge window. - Misc janitorial fixes" * tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: Add Spreadtrum PMIC EIC driver support gpio: Add Spreadtrum EIC driver support dt-bindings: gpio: Add Spreadtrum EIC controller documentation gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe() pinctrl: qcom: Don't allow protected pins to be requested gpiolib: Support 'gpio-reserved-ranges' property gpiolib: Change bitmap allocation to kmalloc_array gpiolib: Extract mask allocation into subroutine dt-bindings: gpio: Add a gpio-reserved-ranges property gpio: mockup: fix a potential crash when creating debugfs entries gpio: pca953x: add compatibility for pcal6524 and pcal9555a gpio: dwapb: Add support for a bus clock gpio: Remove VLA from xra1403 driver gpio: Remove VLA from MAX3191X driver gpio: ws16c48: Implement get_multiple callback gpio: gpio-mm: Implement get_multiple callback gpio: 104-idi-48: Implement get_multiple callback gpio: 104-dio-48e: Implement get_multiple callback gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks gpio: pci-idio-16: Implement get_multiple callback ...
2018-04-02Merge branch 'syscalls-next' of ↵Linus Torvalds8-103/+105
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux Pull removal of in-kernel calls to syscalls from Dominik Brodowski: "System calls are interaction points between userspace and the kernel. Therefore, system call functions such as sys_xyzzy() or compat_sys_xyzzy() should only be called from userspace via the syscall table, but not from elsewhere in the kernel. At least on 64-bit x86, it will likely be a hard requirement from v4.17 onwards to not call system call functions in the kernel: It is better to use use a different calling convention for system calls there, where struct pt_regs is decoded on-the-fly in a syscall wrapper which then hands processing over to the actual syscall function. This means that only those parameters which are actually needed for a specific syscall are passed on during syscall entry, instead of filling in six CPU registers with random user space content all the time (which may cause serious trouble down the call chain). Those x86-specific patches will be pushed through the x86 tree in the near future. Moreover, rules on how data may be accessed may differ between kernel data and user data. This is another reason why calling sys_xyzzy() is generally a bad idea, and -- at most -- acceptable in arch-specific code. This patchset removes all in-kernel calls to syscall functions in the kernel with the exception of arch/. On top of this, it cleans up the three places where many syscalls are referenced or prototyped, namely kernel/sys_ni.c, include/linux/syscalls.h and include/linux/compat.h" * 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: (109 commits) bpf: whitelist all syscalls for error injection kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions kernel/sys_ni: sort cond_syscall() entries syscalls/x86: auto-create compat_sys_*() prototypes syscalls: sort syscall prototypes in include/linux/compat.h net: remove compat_sys_*() prototypes from net/compat.h syscalls: sort syscall prototypes in include/linux/syscalls.h kexec: move sys_kexec_load() prototype to syscalls.h x86/sigreturn: use SYSCALL_DEFINE0 x86: fix sys_sigreturn() return type to be long, not unsigned long x86/ioport: add ksys_ioperm() helper; remove in-kernel calls to sys_ioperm() mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead() mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff() mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64() fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate() fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscalls fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate() fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscall kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid() kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare() ...
2018-04-02Merge tag 'arch-removal' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
2018-04-02kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid()Dominik Brodowski1-1/+1
Using this helper allows us to avoid the in-kernel call to the sys_setsid() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_setsid(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare()Dominik Brodowski1-1/+1
Using this helper allows us to avoid the in-kernel calls to the sys_unshare() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_unshare(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_read() helper; remove in-kernel calls to sys_read()Dominik Brodowski2-6/+6
Using this helper allows us to avoid the in-kernel calls to the sys_read() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_read(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_lseek() helper; remove in-kernel calls to sys_lseek()Dominik Brodowski1-4/+4
Using this helper allows us to avoid the in-kernel calls to the sys_lseek() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_lseek(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_ioctl() helper; remove in-kernel calls to sys_ioctl()Dominik Brodowski4-14/+15
Using this helper allows us to avoid the in-kernel calls to the sys_ioctl() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_ioctl(). After careful review, at least some of these calls could be converted to do_vfs_ioctl() in future. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_getdents64() helper; remove in-kernel calls to sys_getdents64()Dominik Brodowski1-2/+2
Using this helper allows us to avoid the in-kernel calls to the sys_getdents64() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_getdents64(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_open() wrapper; remove in-kernel calls to sys_open()Dominik Brodowski6-14/+14
Using this wrapper allows us to avoid the in-kernel calls to the sys_open() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_open(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_close() wrapper; remove in-kernel calls to sys_close()Dominik Brodowski5-14/+14
Using the ksys_close() wrapper allows us to get rid of in-kernel calls to the sys_close() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_close(), with one subtle difference: The few places which checked the return value did not care about the return value re-writing in sys_close(), so simply use a wrapper around __close_fd(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_ftruncate() wrapper; remove in-kernel calls to sys_ftruncate()Dominik Brodowski1-1/+1
Using the ksys_ftruncate() wrapper allows us to get rid of in-kernel calls to the sys_ftruncate() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_ftruncate(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_fchownat(), ksys_fchown() helpers and ksys_{,l}chown() wrappersDominik Brodowski1-4/+4
Using the fs-interal do_fchownat() wrapper allows us to get rid of fs-internal calls to the sys_fchownat() syscall. Introducing the ksys_fchown() helper and the ksys_{,}chown() wrappers allows us to avoid the in-kernel calls to the sys_{,l,f}chown() syscalls. The ksys_ prefix denotes that these functions are meant as a drop-in replacement for the syscalls. In particular, they use the same calling convention as sys_{,l,f}chown(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_faccessat() helper and ksys_access() wrapper; remove in-kernel ↵Dominik Brodowski1-1/+2
calls to syscall Using the fs-internal do_faccessat() helper allows us to get rid of fs-internal calls to the sys_faccessat() syscall. Introducing the ksys_access() wrapper allows us to avoid the in-kernel calls to the sys_access() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_access(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_fchmod() and do_fchmodat() helpers and ksys_chmod() wrapper; ↵Dominik Brodowski1-3/+3
remove in-kernel calls to syscall Using the fs-internal do_fchmodat() helper allows us to get rid of fs-internal calls to the sys_fchmodat() syscall. Introducing the ksys_fchmod() helper and the ksys_chmod() wrapper allows us to avoid the in-kernel calls to the sys_fchmod() and sys_chmod() syscalls. The ksys_ prefix denotes that these functions are meant as a drop-in replacement for the syscalls. In particular, they use the same calling convention as sys_fchmod() and sys_chmod(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_linkat() helper and ksys_link() wrapper; remove in-kernel calls ↵Dominik Brodowski1-1/+1
to syscall Using the fs-internal do_linkat() helper allows us to get rid of fs-internal calls to the sys_linkat() syscall. Introducing the ksys_link() wrapper allows us to avoid the in-kernel calls to sys_link() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_link(). In the near future, the only fs-external user of ksys_link() should be converted to use vfs_link() instead. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_mknodat() helper and ksys_mknod() wrapper; remove in-kernel calls ↵Dominik Brodowski3-3/+3
to syscall Using the fs-internal do_mknodat() helper allows us to get rid of fs-internal calls to the sys_mknodat() syscall. Introducing the ksys_mknod() wrapper allows us to avoid the in-kernel calls to sys_mknod() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_mknod(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_symlinkat() helper and ksys_symlink() wrapper; remove in-kernel ↵Dominik Brodowski1-1/+1
calls to syscall Using the fs-internal do_symlinkat() helper allows us to get rid of fs-internal calls to the sys_symlinkat() syscall. Introducing the ksys_symlink() wrapper allows us to avoid the in-kernel calls to the sys_symlink() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_symlink(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_mkdirat() helper and ksys_mkdir() wrapper; remove in-kernel calls ↵Dominik Brodowski3-4/+4
to syscall Using the fs-internal do_mkdirat() helper allows us to get rid of fs-internal calls to the sys_mkdirat() syscall. Introducing the ksys_mkdir() wrapper allows us to avoid the in-kernel calls to the sys_mkdir() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_mkdir(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_rmdir() wrapper; remove in-kernel calls to sys_rmdir()Dominik Brodowski1-2/+2
Using this wrapper allows us to avoid the in-kernel calls to the sys_rmdir() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_rmdir(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_unlink() wrapper; remove in-kernel calls to sys_unlink()Dominik Brodowski4-6/+6
Using this wrapper allows us to avoid the in-kernel calls to the sys_unlink() syscall. The ksys_ prefix denotes that this function is meant s a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_unlink(). In the near future, all callers of ksys_unlink() should be converted to call do_unlinkat() directly or, at least, to operate on regular kernel pointers. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_chdir() helper; remove in-kernel calls to sys_chdir()Dominik Brodowski2-5/+5
Using this helper allows us to avoid the in-kernel calls to the sys_chdir() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_chdir(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_write() helper; remove in-kernel calls to sys_write()Dominik Brodowski2-3/+3
Using this helper allows us to avoid the in-kernel calls to the sys_write() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_write(). In the near future, the do_mounts / initramfs callers of ksys_write() should be converted to use filp_open() and vfs_write() instead. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-s390@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_chroot() helper; remove-in kernel calls to sys_chroot()Dominik Brodowski2-3/+3
Using this helper allows us to avoid the in-kernel calls to the sys_chroot() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_chroot(). In the near future, the fs-external callers of ksys_chroot() should be converted to use kern_path()/set_fs_root() directly. Then ksys_chroot() can be moved within sys_chroot() again. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_dup{,3}() helper; remove in-kernel calls to sys_dup{,3}()Dominik Brodowski2-4/+4
Using ksys_dup() and ksys_dup3() as helper functions allows us to avoid the in-kernel calls to the sys_dup() and sys_dup3() syscalls. The ksys_ prefix denotes that these functions are meant as a drop-in replacement for the syscalls. In particular, they use the same calling convention as sys_dup{,3}(). In the near future, the fs-external callers of ksys_dup{,3}() should be converted to call do_dup2() directly. Then, ksys_dup{,3}() can be moved within sys_dup{,3}() again. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_umount() helper; remove in-kernel call to sys_umount()Dominik Brodowski1-1/+1
Using this helper allows us to avoid the in-kernel call to the sys_umount() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as ksys_umount(). In the near future, the only fs-external caller of ksys_umount() should be converted to call do_umount() directly. Then, ksys_umount() can be moved within sys_umount() again. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_mount() helper; remove in-kernel calls to sys_mount()Dominik Brodowski2-5/+5
Using this helper allows us to avoid the in-kernel calls to the sys_mount() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_mount(). In the near future, all callers of ksys_mount() should be converted to call do_mount() directly. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-03-26treewide: simplify Kconfig dependencies for removed archsArnd Bergmann1-3/+2
A lot of Kconfig symbols have architecture specific dependencies. In those cases that depend on architectures we have already removed, they can be omitted. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-20jump_label: Disable jump labels in __exit codeJosh Poimboeuf1-1/+1
With the following commit: 333522447063 ("jump_label: Explicitly disable jump labels in __init code") ... we explicitly disabled jump labels in __init code, so they could be detected and not warned about in the following commit: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt") In-kernel __exit code has the same issue. It's never used, so it's freed along with the rest of initmem. But jump label entries in __exit code aren't explicitly disabled, so we get the following warning when enabling pr_debug() in __exit code: can't patch jump_label at dmi_sysfs_exit+0x0/0x2d WARNING: CPU: 0 PID: 22572 at kernel/jump_label.c:376 __jump_label_update+0x9d/0xb0 Fix the warning by disabling all jump labels in initmem (which includes both __init and __exit code). Reported-and-tested-by: Li Wang <liwang@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt") Link: http://lkml.kernel.org/r/7121e6e595374f06616c505b6e690e275c0054d1.1521483452.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-18Merge tag 'v4.16-rc5' into develLinus Walleij1-0/+2
Linux 4.16-rc5 merged into the GPIO devel branch to resolve a nasty conflict between fixes and devel in the RCAR driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-09mn10300: Remove the architectureDavid Howells1-1/+1
Remove the MN10300 arch as the hardware is defunct. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> cc: Masahiro Yamada <yamada.masahiro@socionext.com> cc: linux-am33-list@redhat.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-22pc104: Add EXPERT dependency for PC104 Kconfig optionWilliam Breathitt Gray1-1/+1
PC/104 device driver Kconfig options previously had an implicit EXPERT dependency by way of an explicit ISA_BUS_API dependency. Now that these driver Kconfig options select ISA_BUS_API rather than depend on it, the PC104 Kconfig option should have an explicit EXPERT dependency. The PC/104 form factor and bus architecture are common in embedded and specialized systems, but uncommon in typical desktop setups. For this reason, it is best to mask these devices and configurations via the EXPERT Kconfig option because the majority of users will never need to concern themselves with PC/104. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-21jump_label: Explicitly disable jump labels in __init codeJosh Poimboeuf1-0/+2
After initmem has been freed, any jump labels in __init code are prevented from being written to by the kernel_text_address() check in __jump_label_update(). However, this check is quite broad. If kernel_text_address() were to return false for any other reason, the jump label write would fail silently with no warning. For jump labels in module init code, entry->code is set to zero to indicate that the entry is disabled. Do the same thing for core kernel init code. This makes the behavior more consistent, and will also make it more straightforward to detect non-init jump label write failures in the next patch. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c52825c73f3a174e8398b6898284ec20d4deb126.1519051220.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-05membarrier: Provide core serializing command, *_SYNC_COREMathieu Desnoyers1-0/+3
Provide core serializing membarrier command to support memory reclaim by JIT. Each architecture needs to explicitly opt into that support by documenting in their architecture code how they provide the core serializing instructions required when returning from the membarrier IPI, and after the scheduler has updated the curr->mm pointer (before going back to user-space). They should then select ARCH_HAS_MEMBARRIER_SYNC_CORE to enable support for that command on their architecture. Architectures selecting this feature need to either document that they issue core serializing instructions when returning to user-space, or implement their architecture-specific sync_core_before_usermode(). Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/20180129202020.8515-9-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-05locking: Introduce sync_core_before_usermode()Mathieu Desnoyers1-0/+3
Introduce an architecture function that ensures the current CPU issues a core serializing instruction before returning to usermode. This is needed for the membarrier "sync_core" command. Architectures defining the sync_core_before_usermode() static inline need to select ARCH_HAS_SYNC_CORE_BEFORE_USERMODE. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/20180129202020.8515-7-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-05powerpc, membarrier: Skip memory barrier in switch_mm()Mathieu Desnoyers1-0/+3
Allow PowerPC to skip the full memory barrier in switch_mm(), and only issue the barrier when scheduling into a task belonging to a process that has registered to use expedited private. Threads targeting the same VM but which belong to different thread groups is a tricky case. It has a few consequences: It turns out that we cannot rely on get_nr_threads(p) to count the number of threads using a VM. We can use (atomic_read(&mm->mm_users) == 1 && get_nr_threads(p) == 1) instead to skip the synchronize_sched() for cases where the VM only has a single user, and that user only has a single thread. It also turns out that we cannot use for_each_thread() to set thread flags in all threads using a VM, as it only iterates on the thread group. Therefore, test the membarrier state variable directly rather than relying on thread flags. This means membarrier_register_private_expedited() needs to set the MEMBARRIER_STATE_PRIVATE_EXPEDITED flag, issue synchronize_sched(), and only then set MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY which allows private expedited membarrier commands to succeed. membarrier_arch_switch_mm() now tests for the MEMBARRIER_STATE_PRIVATE_EXPEDITED flag. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20180129202020.8515-3-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-29Merge tag 'init_task-20180117' of ↵Linus Torvalds2-9/+163
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull init_task initializer cleanups from David Howells: "It doesn't seem useful to have the init_task in a header file rather than in a normal source file. We could consolidate init_task handling instead and expand out various macros. Here's a series of patches that consolidate init_task handling: (1) Make THREAD_SIZE available to vmlinux.lds for cris, hexagon and openrisc. (2) Alter the INIT_TASK_DATA linker script macro to set init_thread_union and init_stack rather than defining these in C. Insert init_task and init_thread_into into the init_stack area in the linker script as appropriate to the configuration, with different section markers so that they end up correctly ordered. We can then get merge ia64's init_task.c into the main one. We then have a bunch of single-use INIT_*() macros that seem only to be macros because they used to be used per-arch. We can then expand these in place of the user and get rid of a few lines and a lot of backslashes. (3) Expand INIT_TASK() in place. (4) Expand in place various small INIT_*() macros that are defined conditionally. Expand them and surround them by #if[n]def/#endif in the .c file as it takes fewer lines. (5) Expand INIT_SIGNALS() and INIT_SIGHAND() in place. (6) Expand INIT_STRUCT_PID in place. These macros can then be discarded" * tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: Expand INIT_STRUCT_PID and remove Expand the INIT_SIGNALS and INIT_SIGHAND macros and remove Expand various INIT_* macros and remove Expand INIT_TASK() in init/init_task.c and remove Construct init thread stack in the linker script rather than by union openrisc: Make THREAD_SIZE available to vmlinux.lds hexagon: Make THREAD_SIZE available to vmlinux.lds cris: Make THREAD_SIZE available to vmlinux.lds
2018-01-17Expand the INIT_SIGNALS and INIT_SIGHAND macros and removeDavid Howells1-2/+28
There doesn't seem to be any need to have the INIT_SIGNALS and INIT_SIGHAND macros, so expand them in their single places of use and remove them. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-17Expand various INIT_* macros and removeDavid Howells1-24/+71
Expand various INIT_* macros into the single places they're used in init/init_task.c and remove them. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-17Expand INIT_TASK() in init/init_task.c and removeDavid Howells1-2/+83
It's no longer necessary to have an INIT_TASK() macro, and this can be expanded into the one place it is now used and removed. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-12Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A Kconfig fix, a build fix and a membarrier bug fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: membarrier: Disable preemption when calling smp_call_function_many() sched/isolation: Make CONFIG_CPU_ISOLATION=y depend on SMP or COMPILE_TEST ia64, sched/cputime: Fix build error if CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
2018-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-0/+7
Daniel Borkmann says: ==================== pull-request: bpf 2018-01-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Prevent out-of-bounds speculation in BPF maps by masking the index after bounds checks in order to fix spectre v1, and add an option BPF_JIT_ALWAYS_ON into Kconfig that allows for removing the BPF interpreter from the kernel in favor of JIT-only mode to make spectre v2 harder, from Alexei. 2) Remove false sharing of map refcount with max_entries which was used in spectre v1, from Daniel. 3) Add a missing NULL psock check in sockmap in order to fix a race, from John. 4) Fix test_align BPF selftest case since a recent change in verifier rejects the bit-wise arithmetic on pointers earlier but test_align update was missing, from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-09Construct init thread stack in the linker script rather than by unionDavid Howells2-6/+6
Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-09bpf: introduce BPF_JIT_ALWAYS_ON configAlexei Starovoitov1-0/+7
The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-08sched/isolation: Make CONFIG_CPU_ISOLATION=y depend on SMP or COMPILE_TESTGeert Uytterhoeven1-0/+1
On uniprocessor systems, critical and non-critical tasks cannot be isolated, as there is only a single CPU core. Hence enabling CPU isolation by default on such systems does not make much sense. Instead of changing the default for !SMP, fix this by making the feature depend on SMP, with an override for compile-testing. Note that its sole selector (NO_HZ_FULL) already depends on SMP. This decreases kernel size for a default uniprocessor kernel by ca. 1 KiB. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 2c43838c99d9d23f ("sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default") Link: http://lkml.kernel.org/r/1514891590-20782-1-git-send-email-geert@linux-m68k.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-31Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Three patches addressing the fallout of the CPU_ISOLATION changes especially with NO_HZ_FULL plus documentation of boot parameter dependency" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/isolation: Document boot parameters dependency on CONFIG_CPU_ISOLATION=y sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default sched/isolation: Make CONFIG_NO_HZ_FULL select CONFIG_CPU_ISOLATION
2017-12-29Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 page table isolation updates from Thomas Gleixner: "This is the final set of enabling page table isolation on x86: - Infrastructure patches for handling the extra page tables. - Patches which map the various bits and pieces which are required to get in and out of user space into the user space visible page tables. - The required changes to have CR3 switching in the entry/exit code. - Optimizations for the CR3 switching along with documentation how the ASID/PCID mechanism works. - Updates to dump pagetables to cover the user space page tables for W+X scans and extra debugfs files to analyze both the kernel and the user space visible page tables The whole functionality is compile time controlled via a config switch and can be turned on/off on the command line as well" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) x86/ldt: Make the LDT mapping RO x86/mm/dump_pagetables: Allow dumping current pagetables x86/mm/dump_pagetables: Check user space page table for WX pages x86/mm/dump_pagetables: Add page table directory to the debugfs VFS hierarchy x86/mm/pti: Add Kconfig x86/dumpstack: Indicate in Oops whether PTI is configured and enabled x86/mm: Clarify the whole ASID/kernel PCID/user PCID naming x86/mm: Use INVPCID for __native_flush_tlb_single() x86/mm: Optimize RESTORE_CR3 x86/mm: Use/Fix PCID to optimize user/kernel switches x86/mm: Abstract switching CR3 x86/mm: Allow flushing for future ASID switches x86/pti: Map the vsyscall page if needed x86/pti: Put the LDT in its own PGD if PTI is on x86/mm/64: Make a full PGD-entry size hole in the memory map x86/events/intel/ds: Map debug buffers in cpu_entry_area x86/cpu_entry_area: Add debugstore entries to cpu_entry_area x86/mm/pti: Map ESPFIX into user space x86/mm/pti: Share entry text PMD x86/entry: Align entry text section to PMD boundary ...
2017-12-23x86/mm/pti: Add infrastructure for page table isolationThomas Gleixner1-0/+3
Add the initial files for kernel page table isolation, with a minimal init function and the boot time detection for this misfeature. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PTI preparatory patches from Thomas Gleixner: "Todays Advent calendar window contains twentyfour easy to digest patches. The original plan was to have twenty three matching the date, but a late fixup made that moot. - Move the cpu_entry_area mapping out of the fixmap into a separate address space. That's necessary because the fixmap becomes too big with NRCPUS=8192 and this caused already subtle and hard to diagnose failures. The top most patch is fresh from today and cures a brain slip of that tall grumpy german greybeard, who ignored the intricacies of 32bit wraparounds. - Limit the number of CPUs on 32bit to 64. That's insane big already, but at least it's small enough to prevent address space issues with the cpu_entry_area map, which have been observed and debugged with the fixmap code - A few TLB flush fixes in various places plus documentation which of the TLB functions should be used for what. - Rename the SYSENTER stack to CPU_ENTRY_AREA stack as it is used for more than sysenter now and keeping the name makes backtraces confusing. - Prevent LDT inheritance on exec() by moving it to arch_dup_mmap(), which is only invoked on fork(). - Make vysycall more robust. - A few fixes and cleanups of the debug_pagetables code. Check PAGE_PRESENT instead of checking the PTE for 0 and a cleanup of the C89 initialization of the address hint array which already was out of sync with the index enums. - Move the ESPFIX init to a different place to prepare for PTI. - Several code moves with no functional change to make PTI integration simpler and header files less convoluted. - Documentation fixes and clarifications" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/cpu_entry_area: Prevent wraparound in setup_cpu_entry_area_ptes() on 32bit init: Invoke init_espfix_bsp() from mm_init() x86/cpu_entry_area: Move it out of the fixmap x86/cpu_entry_area: Move it to a separate unit x86/mm: Create asm/invpcid.h x86/mm: Put MMU to hardware ASID translation in one place x86/mm: Remove hard-coded ASID limit checks x86/mm: Move the CR3 construction functions to tlbflush.h x86/mm: Add comments to clarify which TLB-flush functions are supposed to flush what x86/mm: Remove superfluous barriers x86/mm: Use __flush_tlb_one() for kernel memory x86/microcode: Dont abuse the TLB-flush interface x86/uv: Use the right TLB-flush API x86/entry: Rename SYSENTER_stack to CPU_ENTRY_AREA_entry_stack x86/doc: Remove obvious weirdnesses from the x86 MM layout documentation x86/mm/64: Improve the memory map documentation x86/ldt: Prevent LDT inheritance on exec x86/ldt: Rework locking arch, mm: Allow arch_dup_mmap() to fail x86/vsyscall/64: Warn and fail vsyscall emulation in NATIVE mode ...
2017-12-22init: Invoke init_espfix_bsp() from mm_init()Thomas Gleixner1-4/+2
init_espfix_bsp() needs to be invoked before the page table isolation initialization. Move it into mm_init() which is the place where pti_init() will be added. While at it get rid of the #ifdeffery and provide proper stub functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>