summaryrefslogtreecommitdiffstats
path: root/init/main.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-18Merge tag 'linux-kselftest-kunit-5.10-rc1' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more Kunit updates from Shuah Khan: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern that Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format * tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE lib: kunit: add bitfield test conversion to KUnit Documentation: kunit: add a brief blurb about kunit_test_suite kunit: test: add test plan to KUnit TAP format init: main: add KUnit to kernel init kunit: test: create a single centralized executor for all tests vmlinux.lds.h: add linker section for KUnit test suites Documentation: kunit: Add naming guidelines
2020-10-15Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "The latest advances in computer science from the trivial queue" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: xtensa: fix Kconfig typo spelling.txt: Remove some duplicate entries mtd: rawnand: oxnas: cleanup/simplify code selftests: vm: add fragment CONFIG_GUP_BENCHMARK perf: Fix opt help text for --no-bpf-event HID: logitech-dj: Fix spelling in comment bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG MAINTAINERS: rectify MMP SUPPORT after moving cputype.h scif: Fix spelling of EACCES printk: fix global comment lib/bitmap.c: fix spello fs: Fix missing 'bit' in comment
2020-10-09init: main: add KUnit to kernel initBrendan Higgins1-0/+4
Although we have not seen any actual examples where KUnit doesn't work because it runs in the late init phase of the kernel, it has been a concern for some time that this could potentially be an issue in the future. So, remove KUnit from init calls entirely, instead call directly from kernel_init() so that KUnit runs after late init. Co-developed-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-09-18bootconfig: init: make xbc_namebuf staticJason Yan1-1/+1
This eliminates the following sparse warning: init/main.c:306:6: warning: symbol 'xbc_namebuf' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20200915070324.2239473-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18kprobes: tracing/kprobes: Fix to kill kprobes on initmem after bootMasami Hiramatsu1-0/+2
Since kprobe_event= cmdline option allows user to put kprobes on the functions in initmem, kprobe has to make such probes gone after boot. Currently the probes on the init functions in modules will be handled by module callback, but the kernel init text isn't handled. Without this, kprobes may access non-exist text area to disable or remove it. Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2 Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter") Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-01bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIGShaokun Zhang1-1/+1
Fix up one typo: CONFIG_BOOTCONFIG -> CONFIG_BOOT_CONFIG Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-08-07Merge tag 'trace-v5.9' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - The biggest news in that the tracing ring buffer can now time events that interrupted other ring buffer events. Before this change, if an interrupt came in while recording another event, and that interrupt also had an event, those events would all have the same time stamp as the event it interrupted. Now, with the new design, those events will have a unique time stamp and rightfully display the time for those events that were recorded while interrupting another event. - Bootconfig how has an "override" operator that lets the users have a default config, but then add options to override the default. - A fix was made to properly filter function graph tracing to the ftrace PIDs. This came in at the end of the -rc cycle, and needs to be backported. - Several clean ups, performance updates, and minor fixes as well. * tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (39 commits) tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE tracing: Use trace_sched_process_free() instead of exit() for pid tracing bootconfig: Fix to find the initargs correctly Documentation: bootconfig: Add bootconfig override operator tools/bootconfig: Add testcases for value override operator lib/bootconfig: Add override operator support kprobes: Remove show_registers() function prototype tracing/uprobe: Remove dead code in trace_uprobe_register() kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler ftrace: Fix ftrace_trace_task return value tracepoint: Use __used attribute definitions from compiler_attributes.h tracepoint: Mark __tracepoint_string's __used trace : Have tracing buffer info use kvzalloc instead of kzalloc tracing: Remove outdated comment in stack handling ftrace: Do not let direct or IPMODIFY ftrace_ops be added to module and set trampolines ftrace: Setup correct FTRACE_FL_REGS flags for module tracing/hwlat: Honor the tracing_cpumask tracing/hwlat: Drop the duplicate assignment in start_kthread() tracing: Save one trace_event->type by using __TRACE_LAST_TYPE ...
2020-08-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge misc updates from Andrew Morton: - a few MM hotfixes - kthread, tools, scripts, ntfs and ocfs2 - some of MM Subsystems affected by this patch series: kthread, tools, scripts, ntfs, ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore, sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits) mm: vmscan: consistent update to pgrefill mm/vmscan.c: fix typo khugepaged: khugepaged_test_exit() check mmget_still_valid() khugepaged: retract_page_tables() remember to test exit khugepaged: collapse_pte_mapped_thp() protect the pmd lock khugepaged: collapse_pte_mapped_thp() flush the right range mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible mm: thp: replace HTTP links with HTTPS ones mm/page_alloc: fix memalloc_nocma_{save/restore} APIs mm/page_alloc.c: skip setting nodemask when we are in interrupt mm/page_alloc: fallbacks at most has 3 elements mm/page_alloc: silence a KASAN false positive mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask() mm/page_alloc.c: simplify pageblock bitmap access mm/page_alloc.c: extract the common part in pfn_to_bitidx() mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits mm/shuffle: remove dynamic reconfiguration mm/memory_hotplug: document why shuffle_zone() is relevant mm/page_alloc: remove nr_free_pagecache_pages() mm: remove vm_total_pages ...
2020-08-07kasan, arm64: don't instrument functions that enable kasanAndrey Konovalov1-1/+1
This patch prepares Software Tag-Based KASAN for stack tagging support. With stack tagging enabled, KASAN tags stack variable in each function in its prologue. In start_kernel() stack variables get tagged before KASAN is enabled via setup_arch()->kasan_init(). As the result the tags for start_kernel()'s stack variables end up in the temporary shadow memory. Later when KASAN gets enabled, switched to normal shadow, and starts checking tags, this leads to false-positive reports, as proper tags are missing in normal shadow. Disable KASAN instrumentation for start_kernel(). Also disable it for arm64's setup_arch() as a precaution (it doesn't have any stack variables right now). [andreyknvl@google.com: reorder attributes for start_kernel()] Link: http://lkml.kernel.org/r/26fb6165a17abcf61222eda5184c030fb6b133d1.1596544734.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Petrova <lenaptr@google.com> Cc: Marco Elver <elver@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Walter Wu <walter-zh.wu@mediatek.com> Cc: Ard Biesheuvel <ardb@kernel.org> Link: http://lkml.kernel.org/r/55d432671a92e931ab8234b03dc36b14d4c21bfb.1596199677.git.andreyknvl@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07Merge branch 'hch.init_path' of ↵Linus Torvalds1-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull init and set_fs() cleanups from Al Viro: "Christoph's 'getting rid of ksys_...() uses under KERNEL_DS' series" * 'hch.init_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (50 commits) init: add an init_dup helper init: add an init_utimes helper init: add an init_stat helper init: add an init_mknod helper init: add an init_mkdir helper init: add an init_symlink helper init: add an init_link helper init: add an init_eaccess helper init: add an init_chmod helper init: add an init_chown helper init: add an init_chroot helper init: add an init_chdir helper init: add an init_rmdir helper init: add an init_unlink helper init: add an init_umount helper init: add an init_mount helper init: mark create_dev as __init init: mark console_on_rootfs as __init init: initialize ramdisk_execute_command at compile time devtmpfs: refactor devtmpfsd() ...
2020-08-04init: add an init_dup helperChristoph Hellwig1-4/+4
Add a simple helper to grab a reference to a file and install it at the next available fd, and switch the early init code over to it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-04Merge branch 'exec-linus' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull execve updates from Eric Biederman: "During the development of v5.7 I ran into bugs and quality of implementation issues related to exec that could not be easily fixed because of the way exec is implemented. So I have been diggin into exec and cleaning up what I can. This cycle I have been looking at different ideas and different implementations to see what is possible to improve exec, and cleaning the way exec interfaces with in kernel users. Only cleaning up the interfaces of exec with rest of the kernel has managed to stabalize and make it through review in time for v5.9-rc1 resulting in 2 sets of changes this cycle. - Implement kernel_execve - Make the user mode driver code a better citizen With kernel_execve the code size got a little larger as the copying of parameters from userspace and copying of parameters from userspace is now separate. The good news is kernel threads no longer need to play games with set_fs to use exec. Which when combined with the rest of Christophs set_fs changes should security bugs with set_fs much more difficult" * 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits) exec: Implement kernel_execve exec: Factor bprm_stack_limits out of prepare_arg_pages exec: Factor bprm_execve out of do_execve_common exec: Move bprm_mm_init into alloc_bprm exec: Move initialization of bprm->filename into alloc_bprm exec: Factor out alloc_bprm exec: Remove unnecessary spaces from binfmts.h umd: Stop using split_argv umd: Remove exit_umh bpfilter: Take advantage of the facilities of struct pid exit: Factor thread_group_exited out of pidfd_poll umd: Track user space drivers with struct pid bpfilter: Move bpfilter_umh back into init data exec: Remove do_execve_file umh: Stop calling do_execve_file umd: Transform fork_usermode_blob into fork_usermode_driver umd: Rename umd_info.cmdline umd_info.driver_name umd: For clarity rename umh_info umd_info umh: Separate the user mode driver and the user mode helper support umh: Remove call_usermodehelper_setup_file. ...
2020-08-04bootconfig: Fix to find the initargs correctlyMasami Hiramatsu1-6/+8
Since the parse_args() stops parsing at '--', bootconfig_params() will never get the '--' as param and initargs_found never be true. In the result, if we pass some init arguments via the bootconfig, those are always appended to the kernel command line with '--' even if the kernel command line already has '--'. To fix this correctly, check the return value of parse_args() and set initargs_found true if the return value is not an error but a valid address. Link: https://lkml.kernel.org/r/159650953285.270383.14822353843556363851.stgit@devnote2 Fixes: f61872bb58a1 ("bootconfig: Use parse_args() to find bootconfig and '--'") Cc: stable@vger.kernel.org Reported-by: Arvind Sankar <nivedita@alum.mit.edu> Suggested-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-07-31init: add an init_eaccess helperChristoph Hellwig1-2/+2
Add a simple helper to check if a file exists based on kernel space file name and switch the early init code over to it. Note that this theoretically changes behavior as it always is based on the effective permissions. But during early init that doesn't make a difference. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: mark console_on_rootfs as __initChristoph Hellwig1-1/+1
This helper is only used for the early init code. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: initialize ramdisk_execute_command at compile timeChristoph Hellwig1-5/+1
Set ramdisk_execute_command to "/init" at compile time. The command line can still override it, but this saves a few instructions and removes a NULL check. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: open code setting up stdin/stdout/stderrChristoph Hellwig1-6/+10
Don't rely on the implicit set_fs(KERNEL_DS) for ksys_open to work, but instead open a struct file for /dev/console and then install it as FD 0/1/2 manually. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-21exec: Implement kernel_execveEric W. Biederman1-3/+1
To allow the kernel not to play games with set_fs to call exec implement kernel_execve. The function kernel_execve takes pointers into kernel memory and copies the values pointed to onto the new userspace stack. The calls with arguments from kernel space of do_execve are replaced with calls to kernel_execve. The calls do_execve and do_execveat are made static as there are now no callers outside of exec. The comments that mention do_execve are updated to refer to kernel_execve or execve depending on the circumstances. In addition to correcting the comments, this makes it easy to grep for do_execve and verify it is not used. Inspired-by: https://lkml.kernel.org/r/20200627072704.2447163-1-hch@lst.de Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/87wo365ikj.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-06-16security: allow using Clang's zero initialization for stack variablesglider@google.com1-5/+7
In addition to -ftrivial-auto-var-init=pattern (used by CONFIG_INIT_STACK_ALL now) Clang also supports zero initialization for locals enabled by -ftrivial-auto-var-init=zero. The future of this flag is still being debated (see https://bugs.llvm.org/show_bug.cgi?id=45497). Right now it is guarded by another flag, -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang, which means it may not be supported by future Clang releases. Another possible resolution is that -ftrivial-auto-var-init=zero will persist (as certain users have already started depending on it), but the name of the guard flag will change. In the meantime, zero initialization has proven itself as a good production mitigation measure against uninitialized locals. Unlike pattern initialization, which has a higher chance of triggering existing bugs, zero initialization provides safe defaults for strings, pointers, indexes, and sizes. On the other hand, pattern initialization remains safer for return values. Chrome OS and Android are moving to using zero initialization for production builds. Performance-wise, the difference between pattern and zero initialization is usually negligible, although the generated code for zero initialization is more compact. This patch renames CONFIG_INIT_STACK_ALL to CONFIG_INIT_STACK_ALL_PATTERN and introduces another config option, CONFIG_INIT_STACK_ALL_ZERO, that enables zero initialization for locals if the corresponding flags are supported by Clang. Cc: Kees Cook <keescook@chromium.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alexander Potapenko <glider@google.com> Link: https://lore.kernel.org/r/20200616083435.223038-1-glider@google.com Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-11Rebase locking/kcsan to locking/urgentThomas Gleixner1-0/+2
Merge the state of the locking kcsan branch before the read/write_once() and the atomics modifications got merged. Squash the fallout of the rebase on top of the read/write once and atomic fallback work into the merge. The history of the original branch is preserved in tag locking-kcsan-2020-06-02. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2020-06-08kernel/sysctl: support setting sysctl parameters from kernel command lineVlastimil Babka1-0/+2
Patch series "support setting sysctl parameters from kernel command line", v3. This series adds support for something that seems like many people always wanted but nobody added it yet, so here's the ability to set sysctl parameters via kernel command line options in the form of sysctl.vm.something=1 The important part is Patch 1. The second, not so important part is an attempt to clean up legacy one-off parameters that do the same thing as a sysctl. I don't want to remove them completely for compatibility reasons, but with generic sysctl support the idea is to remove the one-off param handlers and treat the parameters as aliases for the sysctl variants. I have identified several parameters that mention sysctl counterparts in Documentation/admin-guide/kernel-parameters.txt but there might be more. The conversion also has varying level of success: - numa_zonelist_order is converted in Patch 2 together with adding the necessary infrastructure. It's easy as it doesn't really do anything but warn on deprecated value these days. - hung_task_panic is converted in Patch 3, but there's a downside that now it only accepts 0 and 1, while previously it was any integer value - nmi_watchdog maps to two sysctls nmi_watchdog and hardlockup_panic, so there's no straighforward conversion possible - traceoff_on_warning is a flag without value and it would be required to handle that somehow in the conversion infractructure, which seems pointless for a single flag This patch (of 5): A recently proposed patch to add vm_swappiness command line parameter in addition to existing sysctl [1] made me wonder why we don't have a general support for passing sysctl parameters via command line. Googling found only somebody else wondering the same [2], but I haven't found any prior discussion with reasons why not to do this. Settings the vm_swappiness issue aside (the underlying issue might be solved in a different way), quick search of kernel-parameters.txt shows there are already some that exist as both sysctl and kernel parameter - hung_task_panic, nmi_watchdog, numa_zonelist_order, traceoff_on_warning. A general mechanism would remove the need to add more of those one-offs and might be handy in situations where configuration by e.g. /etc/sysctl.d/ is impractical. Hence, this patch adds a new parse_args() pass that looks for parameters prefixed by 'sysctl.' and tries to interpret them as writes to the corresponding sys/ files using an temporary in-kernel procfs mount. This mechanism was suggested by Eric W. Biederman [3], as it handles all dynamically registered sysctl tables, even though we don't handle modular sysctls. Errors due to e.g. invalid parameter name or value are reported in the kernel log. The processing is hooked right before the init process is loaded, as some handlers might be more complicated than simple setters and might need some subsystems to be initialized. At the moment the init process can be started and eventually execute a process writing to /proc/sys/ then it should be also fine to do that from the kernel. Sysctls registered later on module load time are not set by this mechanism - it's expected that in such scenarios, setting sysctl values from userspace is practical enough. [1] https://lore.kernel.org/r/BL0PR02MB560167492CA4094C91589930E9FC0@BL0PR02MB5601.namprd02.prod.outlook.com/ [2] https://unix.stackexchange.com/questions/558802/how-to-set-sysctl-using-kernel-command-line-parameter [3] https://lore.kernel.org/r/87bloj2skm.fsf@x220.int.ebiederm.org/ Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Ivan Teterevkov <ivan.teterevkov@nutanix.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: "Guilherme G . Piccoli" <gpiccoli@canonical.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christian Brauner <christian.brauner@ubuntu.com> Link: http://lkml.kernel.org/r/20200427180433.7029-1-vbabka@suse.cz Link: http://lkml.kernel.org/r/20200427180433.7029-2-vbabka@suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04init: allow distribution configuration of default initChris Down1-0/+10
Some init systems (eg. systemd) have init at their own paths, for example, /usr/lib/systemd/systemd. A compatibility symlink to one of the hardcoded init paths is provided by another package, usually named something like systemd-sysvcompat or similar. Currently distro maintainers who are hands-off on the bootloader are more or less required to include those compatibility links as part of their base distribution, because it's hard to migrate away from them since there's a risk some users will not get the message to set init= on the kernel command line appropriately. Moreover, for distributions where the init system is something the distribution itself is opinionated about (eg. Arch, which has systemd in the required `base` package), we could usually reasonably configure this ahead of time when building the distribution kernel. However, we currently simply don't have any way to configure the kernel to do this. Here's an example discussion where removing sysvcompat was discussed by distro maintainers[0]. This patch adds a new Kconfig tunable, CONFIG_DEFAULT_INIT, which if set is tried before the hardcoded fallback list. So the order of precedence is now thus: 1. init= on command line (on failure: panic) 2. CONFIG_DEFAULT_INIT (on failure: try #3) 3. Hardcoded fallback list (on failure: panic) This new config parameter will allow distribution maintainers to move away from these compatibility links safely, without having to worry that their users might not have the right init=. There are also two other benefits of this over having the distribution maintain a symlink: 1. One of the value propositions over simply having distributions maintain a /sbin/init symlink via a package is that it also frees distributions which have a preferred default, but not mandatory, init system from having their package manager fight with their users for control of /{s,}bin/init. Instead, the distribution simply makes their preference known in CONFIG_DEFAULT_INIT, and if the user installs another init system and uninstalls the default one they can still make use of /{s,}bin/init and friends for their own uses. This makes more cases Just Work(tm) without the user having to perform extra configuration via init=. 2. Since before this we don't know which path the distribution actually _intends_ to serve init from, we don't pr_err if it is simply missing, and usually will just silently put the user in a /bin/sh shell. Now that the distribution can make a declaration of intent, we can be more vocal when this init system fails to launch for any reason, even if it's simply because no file exists at that location, speeding up the palaver of init/mount dependency/etc debugging a bit. [0]: https://lists.archlinux.org/pipermail/arch-dev-public/2019-January/029435.html Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Link: http://lkml.kernel.org/r/20200522160234.GA1487022@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03padata: initialize earlierDaniel Jordan1-0/+2
padata will soon initialize the system's struct pages in parallel, so it needs to be ready by page_alloc_init_late(). The error return from padata_driver_init() triggers an initcall warning, so add a warning to padata_init() to avoid silent failure. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Josh Triplett <josh@joshtriplett.org> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Robert Elliott <elliott@hpe.com> Cc: Shile Zhang <shile.zhang@linux.alibaba.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Link: http://lkml.kernel.org/r/20200527173608.2885243-3-daniel.m.jordan@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-17Merge tag 'x86_urgent_for_v5.7-rc7' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: "A single fix for early boot crashes of kernels built with gcc10 and stack protector enabled" * tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix early boot crash on gcc-10, third try
2020-05-15x86: Fix early boot crash on gcc-10, third tryBorislav Petkov1-0/+2
... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org
2020-05-12bootconfig: Fix to prevent warning message if no bootconfig optionMasami Hiramatsu1-4/+6
Commit de462e5f1071 ("bootconfig: Fix to remove bootconfig data from initrd while boot") causes a cosmetic regression on dmesg, which warns "no bootconfig data" message without bootconfig cmdline option. Fix setup_boot_config() by moving no bootconfig check after commandline option check. Link: http://lkml.kernel.org/r/9b1ba335-071d-c983-89a4-2677b522dcc8@molgen.mpg.de Link: http://lkml.kernel.org/r/158916116468.21787.14558782332170588206.stgit@devnote2 Fixes: de462e5f1071 ("bootconfig: Fix to remove bootconfig data from initrd while boot") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-06bootconfig: Fix to remove bootconfig data from initrd while bootMasami Hiramatsu1-17/+52
If there is a bootconfig data in the tail of initrd/initramfs, initrd image sanity check caused an error while decompression stage as follows. [ 0.883882] Unpacking initramfs... [ 2.696429] Initramfs unpacking failed: invalid magic at start of compressed archive This error will be ignored if CONFIG_BLK_DEV_RAM=n, but CONFIG_BLK_DEV_RAM=y the kernel failed to mount rootfs and causes a panic. To fix this issue, shrink down the initrd_end for removing tailing bootconfig data while boot the kernel. Link: http://lkml.kernel.org/r/158788401014.24243.17424755854115077915.stgit@devnote2 Cc: Borislav Petkov <bp@alien8.de> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: 7684b8582c24 ("bootconfig: Load boot config from the tail of initrd") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-04-13Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refreshIngo Molnar1-5/+10
Resolve these conflicts: arch/x86/Kconfig arch/x86/kernel/Makefile Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines in the Kconfig to reduce the probability of future conflicts. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-10printk: queue wake_up_klogd irq_work only if per-CPU areas are readySergey Senozhatsky1-1/+0
printk_deferred(), similarly to printk_safe/printk_nmi, does not immediately attempt to print a new message on the consoles, avoiding calls into non-reentrant kernel paths, e.g. scheduler or timekeeping, which potentially can deadlock the system. Those printk() flavors, instead, rely on per-CPU flush irq_work to print messages from safer contexts. For same reasons (recursive scheduler or timekeeping calls) printk() uses per-CPU irq_work in order to wake up user space syslog/kmsg readers. However, only printk_safe/printk_nmi do make sure that per-CPU areas have been initialised and that it's safe to modify per-CPU irq_work. This means that, for instance, should printk_deferred() be invoked "too early", that is before per-CPU areas are initialised, printk_deferred() will perform illegal per-CPU access. Lech Perczak [0] reports that after commit 1b710b1b10ef ("char/random: silence a lockdep splat with printk()") user-space syslog/kmsg readers are not able to read new kernel messages. The reason is printk_deferred() being called too early (as was pointed out by Petr and John). Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU areas are initialized. Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/ Reported-by: Lech Perczak <l.perczak@camlintechnologies.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Jann Horn <jannh@google.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: John Ogness <john.ogness@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-21Merge branch 'linus' into locking/kcsan, to pick up fixesIngo Molnar1-16/+22
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-21Merge branch 'x86/kdump' into locking/kcsan, to resolve conflictsIngo Molnar1-27/+263
Conflicts: arch/x86/purgatory/Makefile Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-03tools/bootconfig: Show line and column in parse errorMasami Hiramatsu1-4/+10
Show line and column when we got a parse error in bootconfig tool. Current lib/bootconfig shows the parse error with byte offset, but that is not human readable. This makes xbc_init() not showing error message itself but able to pass the error message and position to caller, so that the caller can decode it and show the error message with line number and columns. With this patch, bootconfig tool shows an error with line:column as below. $ cat samples/bad-dotword.bconf # do not start keyword with . key { .word = 1 } $ ./bootconfig -a samples/bad-dotword.bconf initrd Parse Error: Invalid keyword at 3:3 Link: http://lkml.kernel.org/r/158323469002.10560.4023923847704522760.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-26Merge tag 'trace-v5.6-rc2' of ↵Linus Torvalds1-16/+22
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing and bootconfig updates: "Fixes and changes to bootconfig before it goes live in a release. Change in API of bootconfig (before it comes live in a release): - Have a magic value "BOOTCONFIG" in initrd to know a bootconfig exists - Set CONFIG_BOOT_CONFIG to 'n' by default - Show error if "bootconfig" on cmdline but not compiled in - Prevent redefining the same value - Have a way to append values - Added a SELECT BLK_DEV_INITRD to fix a build failure Synthetic event fixes: - Switch to raw_smp_processor_id() for recording CPU value in preempt section. (No care for what the value actually is) - Fix samples always recording u64 values - Fix endianess - Check number of values matches number of fields - Fix a printing bug Fix of trace_printk() breaking postponed start up tests Make a function static that is only used in a single file" * tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue bootconfig: Add append value operator support bootconfig: Prohibit re-defining value on same key bootconfig: Print array as multiple commands for legacy command line bootconfig: Reject subkey and value on same parent key tools/bootconfig: Remove unneeded error message silencer bootconfig: Add bootconfig magic word for indicating bootconfig explicitly bootconfig: Set CONFIG_BOOT_CONFIG=n by default tracing: Clear trace_state when starting trace bootconfig: Mark boot_config_checksum() static tracing: Disable trace_printk() on post poned tests tracing: Have synthetic event test use raw_smp_processor_id() tracing: Fix number printing bug in print_synth_event() tracing: Check that number of vals matches number of synth event fields tracing: Make synth_event trace functions endian-correct tracing: Make sure synth_event_trace() example always uses u64
2020-02-20bootconfig: Print array as multiple commands for legacy command lineMasami Hiramatsu1-14/+8
Print arraied values as multiple same options for legacy kernel command line. With this rule, if the "kernel.*" and "init.*" array entries in bootconfig are printed out as multiple same options, e.g. kernel { console = "ttyS0,115200" console += "tty0" } will be correctly converted to console="ttyS0,115200" console="tty0" in the kernel command line. Link: http://lkml.kernel.org/r/158220118213.26565.8163300497009463916.stgit@devnote2 Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20bootconfig: Add bootconfig magic word for indicating bootconfig explicitlyMasami Hiramatsu1-1/+5
Add bootconfig magic word to the end of bootconfig on initrd image for indicating explicitly the bootconfig is there. Also tools/bootconfig treats wrong size or wrong checksum or parse error as an error, because if there is a bootconfig magic word, there must be a bootconfig. The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word. Thus the block image of the initrd file with bootconfig is as follows. [Initrd][bootconfig][size][csum][#BOOTCONFIG\n] Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2 Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20bootconfig: Set CONFIG_BOOT_CONFIG=n by defaultMasami Hiramatsu1-0/+8
Set CONFIG_BOOT_CONFIG=n by default. This also warns user if CONFIG_BOOT_CONFIG=n but "bootconfig" is given in the kernel command line. Link: http://lkml.kernel.org/r/158220111291.26565.9036889083940367969.stgit@devnote2 Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-20bootconfig: Mark boot_config_checksum() staticQiujun Huang1-1/+1
In fact, this function is only used in this file, so mark it with 'static'. Link: http://lkml.kernel.org/r/1581852511-14163-1-git-send-email-hqjagain@gmail.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-11Merge tag 'trace-v5.6-rc1' of ↵Linus Torvalds1-7/+30
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Various fixes: - Fix an uninitialized variable - Fix compile bug to bootconfig userspace tool (in tools directory) - Suppress some error messages of bootconfig userspace tool - Remove unneded CONFIG_LIBXBC from bootconfig - Allocate bootconfig xbc_nodes dynamically. To ease complaints about taking up static memory at boot up - Use of parse_args() to parse bootconfig instead of strstr() usage Prevents issues of double quotes containing the interested string - Fix missing ring_buffer_nest_end() on synthetic event error path - Return zero not -EINVAL on soft disabled synthetic event (soft disabling must be the same as hard disabling, which returns zero) - Consolidate synthetic event code (remove duplicate code)" * tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Consolidate trace() functions tracing: Don't return -EINVAL when tracing soft disabled synth events tracing: Add missing nest end to synth_event_trace_start() error case tools/bootconfig: Suppress non-error messages bootconfig: Allocate xbc_nodes array dynamically bootconfig: Use parse_args() to find bootconfig and '--' tracing/kprobe: Fix uninitialized variable bug bootconfig: Remove unneeded CONFIG_LIBXBC tools/bootconfig: Fix wrong __VA_ARGS__ usage
2020-02-10bootconfig: Use parse_args() to find bootconfig and '--'Steven Rostedt (VMware)1-7/+30
The current implementation does a naive search of "bootconfig" on the kernel command line. But this could find "bootconfig" that is part of another option in quotes (although highly unlikely). But it also needs to find '--' on the kernel command line to know if it should append a '--' or not when a bootconfig in the initrd file has an "init" section. The check uses the naive strstr() to find to see if it exists. But this can return a false positive if it exists in an option and then the "init" section in the initrd will not be appended properly. Using parse_args() to find both of these will solve both of these problems. Link: https://lore.kernel.org/r/202002070954.C18E7F58B@keescook Fixes: 7495e0926fdf3 ("bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline") Fixes: 1319916209ce8 ("bootconfig: init: Allow admin to use bootconfig for init command line") Reported-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-06Merge tag 'trace-v5.6-2' of ↵Linus Torvalds1-17/+212
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Added new "bootconfig". This looks for a file appended to initrd to add boot config options, and has been discussed thoroughly at Linux Plumbers. Very useful for adding kprobes at bootup. Only enabled if "bootconfig" is on the real kernel command line. - Created dynamic event creation. Merges common code between creating synthetic events and kprobe events. - Rename perf "ring_buffer" structure to "perf_buffer" - Rename ftrace "ring_buffer" structure to "trace_buffer" Had to rename existing "trace_buffer" to "array_buffer" - Allow trace_printk() to work withing (some) tracing code. - Sort of tracing configs to be a little better organized - Fixed bug where ftrace_graph hash was not being protected properly - Various other small fixes and clean ups * tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits) bootconfig: Show the number of nodes on boot message tools/bootconfig: Show the number of bootconfig nodes bootconfig: Add more parse error messages bootconfig: Use bootconfig instead of boot config ftrace: Protect ftrace_graph_hash with ftrace_sync ftrace: Add comment to why rcu_dereference_sched() is open coded tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu tracing: Annotate ftrace_graph_hash pointer with __rcu bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline tracing: Use seq_buf for building dynevent_cmd string tracing: Remove useless code in dynevent_arg_pair_add() tracing: Remove check_arg() callbacks from dynevent args tracing: Consolidate some synth_event_trace code tracing: Fix now invalid var_ref_vals assumption in trace action tracing: Change trace_boot to use synth_event interface tracing: Move tracing selftests to bottom of menu tracing: Move mmio tracer config up with the other tracers tracing: Move tracing test module configs together tracing: Move all function tracing configs together tracing: Documentation for in-kernel synthetic event API ...
2020-02-05bootconfig: Show the number of nodes on boot messageMasami Hiramatsu1-2/+4
Show the number of bootconfig nodes on boot message. Link: http://lkml.kernel.org/r/158091062297.27924.9051634676068550285.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-05bootconfig: Use bootconfig instead of boot configMasami Hiramatsu1-3/+3
Use "bootconfig" (1 word) instead of "boot config" (2 words) in the boot message. Link: http://lkml.kernel.org/r/158091059459.27924.14414336187441539879.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-05bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdlineSteven Rostedt (VMware)1-7/+21
As the bootconfig is appended to the initrd it is not as easy to modify as the kernel command line. If there's some issue with the kernel, and the developer wants to boot a pristine kernel, it should not be needed to modify the initrd to remove the bootconfig for a single boot. As bootconfig is silently added (if the admin does not know where to look they may not know it's being loaded). It should be explicitly added to the kernel cmdline. The loading of the bootconfig is only done if "bootconfig" is on the kernel command line. This will let admins know that the kernel command line is extended. Note, after adding printk()s for when the size is too great or the checksum is wrong, exposed that the current method always looked for the boot config, and if this size and checksum matched, it would parse it (as if either is wrong a printk has been added to show this). It's better to only check this if the boot config is asked to be looked for. Link: https://lore.kernel.org/r/CAHk-=wjfjO+h6bQzrTf=YCZA53Y3EDyAs3Z4gEsT7icA3u_Psw@mail.gmail.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-31init/main.c: fix misleading "This architecture does not have kernel memory ↵Christophe Leroy1-0/+5
protection" message This message leads to thinking that memory protection is not implemented for the said architecture, whereas absence of CONFIG_STRICT_KERNEL_RWX only means that memory protection has not been selected at compile time. Don't print this message when CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is selected by the architecture. Instead, print "Kernel memory protection not selected by kernel config." Link: http://lkml.kernel.org/r/62477e446d9685459d4f27d193af6ff1bd69d55f.1578557581.git.christophe.leroy@c-s.fr Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31init/main.c: fix quoted value handling in unknown_bootoptionArvind Sankar1-3/+4
Patch series "init/main.c: minor cleanup/bugfix of envvar handling", v2. unknown_bootoption passes unrecognized command line arguments to init as either environment variables or arguments. Some of the logic in the function is broken for quoted command line arguments. When an argument of the form param="value" is processed by parse_args and passed to unknown_bootoption, the command line has param\0"value\0 with val pointing to the beginning of value. The helper function repair_env_string is then used to restore the '=' character that was removed by parse_args, and strip the quotes off fully. This results in param=value\0\0 and val ends up pointing to the 'a' instead of the 'v' in value. This bug was introduced when repair_env_string was refactored into a separate function, and the decrement of val in repair_env_string became dead code. This causes two problems in unknown_bootoption in the two places where the val pointer is used as a substitute for the length of param: 1. An argument of the form param=".value" is misinterpreted as a potential module parameter, with the result that it will not be placed in init's environment. 2. An argument of the form param="value" is checked to see if param is an existing environment variable that should be overwritten, but the comparison is off-by-one and compares 'param=v' instead of 'param=' against the existing environment. So passing, for example, TERM="vt100" on the command line results in init being passed both TERM=linux and TERM=vt100 in its environment. Patch 1 adds logging for the arguments and environment passed to init and is independent of the rest: it can be dropped if this is unnecessarily verbose. Patch 2 removes repair_env_string from initcall parameter parsing in do_initcall_level, as that uses a separate copy of the command line now and the repairing is no longer necessary. Patch 3 fixes the bug in unknown_bootoption by recording the length of param explicitly instead of implying it from val-param. This patch (of 3): Commit a99cd1125189 ("init: fix bug where environment vars can't be passed via boot args") introduced two minor bugs in unknown_bootoption by factoring out the quoted value handling into a separate function. When value is quoted, repair_env_string will move the value up 1 byte to strip the quotes, so val in unknown_bootoption no longer points to the actual location of the value. The result is that an argument of the form param=".value" is mistakenly treated as a potential module parameter and is not placed in init's environment, and an argument of the form param="value" can result in a duplicate environment variable: eg TERM="vt100" on the command line will result in both TERM=linux and TERM=vt100 being placed into init's environment. Fix this by recording the length of the param before calling repair_env_string instead of relying on val. Link: http://lkml.kernel.org/r/20191212180023.24339-4-nivedita@alum.mit.edu Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31init/main.c: remove unnecessary repair_env_string in do_initcall_levelArvind Sankar1-6/+10
Since commit 08746a65c296 ("init: fix in-place parameter modification regression"), parse_args in do_initcall_level is called on a copy of saved_command_line. It is unnecessary to call repair_env_string during this parsing, as this copy is not used for anything later. Remove the now unnecessary arguments from repair_env_string as well. Link: http://lkml.kernel.org/r/20191212180023.24339-3-nivedita@alum.mit.edu Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Cc: Krzysztof Mazur <krzysiek@podlesie.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31init/main.c: log arguments and environment passed to initArvind Sankar1-0/+8
Extend logging in `run_init_process` to also show the arguments and environment that we are passing to init. Link: http://lkml.kernel.org/r/20191212180023.24339-2-nivedita@alum.mit.edu Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-29Merge tag 'driver-core-5.6-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is a small set of changes for 5.6-rc1 for the driver core and some firmware subsystem changes. Included in here are: - device.h splitup like you asked for months ago - devtmpfs minor cleanups - firmware core minor changes - debugfs fix for lockdown mode - kernfs cleanup fix - cpu topology minor fix All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (22 commits) firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS devtmpfs: factor out common tail of devtmpfs_{create,delete}_node devtmpfs: initify a bit devtmpfs: simplify initialization of mount_dev devtmpfs: factor out setup part of devtmpfsd() devtmpfs: fix theoretical stale pointer deref in devtmpfsd() driver core: platform: fix u32 greater or equal to zero comparison cpu-topology: Don't error on more than CONFIG_NR_CPUS CPUs in device tree debugfs: Return -EPERM when locked down driver core: Print device when resources present in really_probe() driver core: Fix test_async_driver_probe if NUMA is disabled driver core: platform: Prevent resouce overflow from causing infinite loops fs/kernfs/dir.c: Clean code by removing always true condition component: do not dereference opaque pointer in debugfs drivers/component: remove modular code debugfs: Fix warnings when building documentation device.h: move 'struct driver' stuff out to device/driver.h device.h: move 'struct class' stuff out to device/class.h device.h: move 'struct bus' stuff out to device/bus.h device.h: move dev_printk()-like functions to dev_printk.h ...
2020-01-20Merge tag 'v5.5-rc7' into locking/kcsan, to refresh the treeIngo Molnar1-0/+1
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-13mm, debug_pagealloc: don't rely on static keys too earlyVlastimil Babka1-0/+1
Commit 96a2b03f281d ("mm, debug_pagelloc: use static keys to enable debugging") has introduced a static key to reduce overhead when debug_pagealloc is compiled in but not enabled. It relied on the assumption that jump_label_init() is called before parse_early_param() as in start_kernel(), so when the "debug_pagealloc=on" option is parsed, it is safe to enable the static key. However, it turns out multiple architectures call parse_early_param() earlier from their setup_arch(). x86 also calls jump_label_init() even earlier, so no issue was found while testing the commit, but same is not true for e.g. ppc64 and s390 where the kernel would not boot with debug_pagealloc=on as found by our QA. To fix this without tricky changes to init code of multiple architectures, this patch partially reverts the static key conversion from 96a2b03f281d. Init-time and non-fastpath calls (such as in arch code) of debug_pagealloc_enabled() will again test a simple bool variable. Fastpath mm code is converted to a new debug_pagealloc_enabled_static() variant that relies on the static key, which is enabled in a well-defined point in mm_init() where it's guaranteed that jump_label_init() has been called, regardless of architecture. [sfr@canb.auug.org.au: export _debug_pagealloc_enabled_early] Link: http://lkml.kernel.org/r/20200106164944.063ac07b@canb.auug.org.au Link: http://lkml.kernel.org/r/20191219130612.23171-1-vbabka@suse.cz Fixes: 96a2b03f281d ("mm, debug_pagelloc: use static keys to enable debugging") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>