summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2010-11-19xen: add extra pages to balloonJeremy Fitzhardinge1-0/+7
Add extra pages in the pseudo-physical address space to the balloon so we can extend into them later. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-12xen: implement XENMEM_machphys_mappingIan Campbell1-0/+13
This hypercall allows Xen to specify a non-default location for the machine to physical mapping. This capability is used when running a 32 bit domain 0 on a 64 bit hypervisor to shrink the hypervisor hole to exactly the size required. [ Impact: add Xen hypercall definitions ] Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-10-28Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds5-1/+215
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
2010-10-29mfd: Factor out WM831x I2C I/O from the core driverMark Brown1-0/+12
In preparation for the addition of SPI support for the WM831x move the I2C specific code into a separate file with a separate Kconfig option so the I2C support can be excluded from the build. Also update the 1133-EV1 PMIC module support for SMDK6410 to use the new symbol. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Voltages and GPIOs platform_data definitions for max8998Lukasz Majewski1-0/+12
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29regulator: max8998 BUCK1/2 internal voltages and indexes definedLukasz Majewski1-6/+6
BUCK1/2 internal voltages and indexes defined in the struct max8998_data max_get_voltage_register now uses index values to chose proper register More generic BUCK1/2 registers names provided Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Support for ICs compliant with max8998Lukasz Majewski1-0/+11
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Adding twl6030 mmc card detect support for MMC1kishore kadiyala1-0/+31
Adding card detect callback function and card detect configuration function for MMC1 Controller on OMAP4. Card detect configuration function does initial configuration of the MMC Control & PullUp-PullDown registers of Phoenix. For MMC1 Controller, card detect interrupt source is twl6030 which is non-gpio. The card detect call back function provides card present/absent status by reading MMC Control register present on twl6030. Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect, the suspend/resume initialization which was done in omap_hsmmc_gpio_init previously is moved to the probe thus making it generic for both OMAP3 & OMAP4. Cc: Tony Lindgren <tony@atomide.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Add mc13892 support to mc13xxxUwe Kleine-König2-136/+265
mc13892 is the companion PMIC for Freescale's i.MX51. It's similar enough to mc13782 to support it in a single driver. This patch introduces enough compatibility cruft to keep all users of the superseded mc13783 driver unchanged. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Remove deprecated mc13783 functionsUwe Kleine-König1-18/+0
The last user is gone since v2.6.34-rc1~40 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Allow for bypass of cell resource conflict checkDaniel Drake1-0/+3
The upcoming VIA VX855 MFD driver needs to communicate resources to subdevices where the resources may be claimed by ACPI. Add a flag to mfd_cell to request that resources are not policed. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Declare abx500_remove_ops()Mark Brown1-0/+1
Otherwise sparse warns about a public symbol with no declaration and the compiler can't spot if the callers and users have different signatures for the function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Add basic tps6586x interrupt supportGary King1-0/+31
Add support for enabling and disabling tps6586x subdevice interrupts Signed-off-by: Gary King <gking@nvidia.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Update chip id of 88pm8607Haojian Zhuang1-1/+1
Chipid of 88pm8607 is 0x40 or 0x50. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Align ab8500 with the abx500 interfaceMattias Wallin2-6/+25
This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mmc: Allow 2 byte requests in 4-bit mode for tmio_mmcYusuke Goda1-0/+5
Adjust the tmio_mmc block size check to accept 2-byte requests in 4-bit mode if the hardware supports it. Tested with the SDHI hardware block included in sh7724. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Matt Fleming <matt@console-pimps.org> Acked-by: Magnus Damm <damm@opensource.se> Tested-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mmc: Allow the platform to specify the sh_mmcif get_cd handlerArnd Hannemann1-0/+1
In some platforms (e.g. AP4EVB) the card detect pin of a slot is not directly connected to the sh_mmcif controller, so that polling needs to be used. To overcome the overhead induced by querying the controller on each poll cycle, card detection can be handled in the platform code more efficiently. This patch exposes a get_cd hook for that purpose. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Allow the platform to specify the sh_mobile_sdhi get_cd handlerArnd Hannemann1-0/+2
On some platforms (e.g. AP4EVB) the card detect pin of a slot is not directly connected to the sdhi hardware, so that polling needs to be used with tmio_mmc and card detection is handled in the platform code. This patch allows to set tmio_mmc capabilities (to pass the MMC_CAP_NEEDS_POLL flag) and exposes a get_cd hook for that purpose. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mmc: Allow the tmio_mmc mfd driver to specify get_cd handlerArnd Hannemann1-0/+1
Some controllers, supported by the tmio_mmc driver do not have the card detect pin of a slot connected, so that polling needs to be used and card detection is handled by other means. This patch exposes a get_cd hook for that purpose. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29rtc: Add MAX8998 rtc driverJoonyoung Shim1-1/+5
This adds support for the RTC provided by the Maxim 8998 chip. This driver was tested on a GONI board by using the rtc-test application from the Documentation/rtc.txt. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Add MAX8998 interrupts supportJoonyoung Shim2-6/+77
Use genirq and provide seperated file for interrupts support. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Use i2c_client as an argument on MAX8998 i2c routinesJoonyoung Shim1-25/+5
The MAX8998 chip have regulator and rtc features. The i2c slave address of regulator and rtc is different, so needs each i2c client on i2c operation functions. Also, this patch exports i2c operation functions instead of callback to make easy to read. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29i2c: twl: add register defines for pm master moduleFelipe Balbi1-0/+46
Some modules already need to talk to at least PROTECT_KEY register, while at that, add defines to the entire register space. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29gpio: Add bitmask to block requests to unavailable stmpe GPIOsWolfram Sang1-0/+6
GPIOs on these controller are multi-functional. If you decided to use some of them e.g. as input channels for the ADC, you surely don't want those pins to be reassigned as simple GPIOs (which may be triggered even from userspace via 'export'). Same for the touchscreen controller pins. Since knowledge about the hardware is needed to decide which GPIOs to reserve, let this bitmask be inside platform_data and provide some defines to assist potential users. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Move PCF50633 IRQ protoypes where the definitions can see themMark Brown1-0/+7
Fixed warnings about unprototyped global functions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-28Merge branch 'kbuild' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: initramfs: Fix build break on symbol-prefixed archs initramfs: fix initramfs size calculation initramfs: generalize initramfs_data.xxx.S variants scripts/kallsyms: Enable error messages while hush up unnecessary warnings scripts/setlocalversion: update comment kbuild: Use a single clean rule for kernel and external modules kbuild: Do not run make clean in $(srctree) scripts/mod/modpost.c: fix commentary accordingly to last changes kbuild: Really don't clean bounds.h and asm-offsets.h
2010-10-28regulator: Add option for machine drivers to enable the dummy regulatorMark Brown1-0/+5
Allow machine drivers to explicitly enable the use of the dummy regulator, enabling simpler support for systems with only a few specific supplies visible to software. It is strongly recommended that this is not used on systems with substantial software control over their PMICs, for maximum functionality constrints should be as fully specified as possible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28Regulator: LP3972 PMIC regulator driverAxel Lin1-0/+48
This patch adds regulator drivers for National Semiconductors LP3972 PMIC. This LP3972 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3972 PMIC controller uses I2C interface. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28MAX8952 PMIC Driver Initial ReleaseMyungJoo Ham1-0/+135
MAX8952 PMIC is used to provide voltage output between 770mV - 1400mV with DVS support. In this initial release, users can set voltages for four DVS modes, RAMP delay values, and SYNC frequency. Controlling FPWM/SYNC_MODE/Pull-Down/Ramp Modes and reading CHIP_ID is not supported in this release. If GPIO of EN is not valid in platform data, the driver assumes that it is always-on. If GPIO of VID0 or VID1 is invalid, the driver pulls down VID0 and VID1 to fix DVS mode as 0 and disables DVS support. We assume that V_OUT is capable to provide every voltage from 770mV to 1.40V in 10mV steps although the data sheet has some ambiguity on it. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- v2: - Style correction - Can accept platform_data with invalid GPIOs - Removed unnecessary features - Improved error handling Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds9-840/+401
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (841 commits) Staging: brcm80211: fix usage of roundup in structures Staging: bcm: fix up network device reference counting Staging: keucr: fix up US_ macro change staging: brcm80211: brcmfmac: Removed codeversion from firmware filenames. staging: brcm80211: Remove unnecessary header files. staging: brcm80211: Remove unnecessary includes from bcmutils.c staging: brcm80211: Removed unnecessary pktsetprio() function. Staging: brcm80211: remove typedefs.h Staging: brcm80211: remove uintptr typedef usage Staging: hv: remove struct vmbus_channel_interface Staging: hv: remove Open from struct vmbus_channel_interface Staging: hv: storvsc: call vmbus_open directly Staging: hv: netvsc: call vmbus_open directly Staging: hv: channel: export vmbus_open to modules Staging: hv: remove Close from struct vmbus_channel_interface Staging: hv: netvsc: call vmbus_close directly Staging: hv: storvsc: call vmbus_close directly Staging: hv: channel: export vmbus_close to modules Staging: hv: remove SendPacket from struct vmbus_channel_interface Staging: hv: storvsc: call vmbus_sendpacket directly ... Fix up conflicts in drivers/staging/cx25821/cx25821-audio-upstream.c drivers/staging/cx25821/cx25821-audio.h due to warring whitespace cleanups (neither of which were all that great)
2010-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds1-3/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (32 commits) sh: intc: switch irq_desc iteration to new active IRQ iterator. sh: fix up cpu hotplug IRQ migration for irq_data changes. sh: oprofile: Make sure the backtrace op is available for timer-fallback. sh64: oprofile: Fix up kernel stack pointer size mismatch. sh: oprofile: Fix up and extend op_name_from_perf_id(). sh: lockless get_user_pages_fast() sh64: _PAGE_SPECIAL support. sound: sh: ctrl_in/outX to __raw_read/writeX conversion. sh: disable deprecated genirq support. sh: update show_interrupts() for irq_data chip lookup. sh: intc: irq_data conversion. sh64: irq_data conversion. sh64: update for IRQ flag handling naming changes. rtc: rtc-rs5c313: ctrl_in/outX to __raw_read/writeX conversion. sh: mach-se: irq_data conversion. input: hp680_ts_input: ctrl_in/outX to __raw_read/writeX conversion. input: jornada680_kbd: ctrl_in/outX to __raw_read/writeX conversion. sh: hd64461: irq_data conversion. sh: mach-x3proto: irq_data conversion. sh: mach-systemh: irq_data conversion. ...
2010-10-28Merge branch 'linux-next' of ↵Linus Torvalds4-11/+22
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits) x86: allocate space within a region top-down x86: update iomem_resource end based on CPU physical address capabilities x86/PCI: allocate space from the end of a region, not the beginning PCI: allocate bus resources from the top down resources: support allocating space within a region from the top down resources: handle overflow when aligning start of available area resources: ensure callback doesn't allocate outside available space resources: factor out resource_clip() to simplify find_resource() resources: add a default alignf to simplify find_resource() x86/PCI: MMCONFIG: fix region end calculation PCI: Add support for polling PME state on suspended legacy PCI devices PCI: Export some PCI PM functionality PCI: fix message typo PCI: log vendor/device ID always PCI: update Intel chipset names and defines PCI: use new ccflags variable in Makefile PCI: add PCI_MSIX_TABLE/PBA defines PCI: add PCI vendor id for STmicroelectronics x86/PCI: irq and pci_ids patch for Intel Patsburg DeviceIDs PCI: OLPC: Only enable PCI configuration type override on XO-1 ...
2010-10-28Merge 'staging-next' to Linus's treeGreg Kroah-Hartman9-840/+401
This merges the staging-next tree to Linus's tree and resolves some conflicts that were present due to changes in other trees that were affected by files here. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28Merge branch 'v4l_for_linus' of ↵Linus Torvalds25-264/+306
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (505 commits) [media] af9015: Fix max I2C message size when used with tda18271 [media] IR: initialize ir_raw_event in few more drivers [media] Guard a divide in v4l1 compat layer [media] imon: fix nomouse modprobe option [media] imon: remove redundant change_protocol call [media] imon: fix my egregious brown paper bag w/rdev/idev split [media] cafe_ccic: Configure ov7670 correctly [media] ov7670: allow configuration of image size, clock speed, and I/O method [media] af9015: support for DigitalNow TinyTwin v3 [1f4d:9016] [media] af9015: map DigitalNow TinyTwin v2 remote [media] DigitalNow TinyTwin remote controller [media] af9015: RC fixes and improvements videodev2.h.xml: Update to reflect the latest changes at videodev2.h [media] v4l: document new Bayer and monochrome pixel formats [media] DocBook/v4l: Add missing formats used on gspca cpia1 and sn9c2028 [media] firedtv: add parameter to fake ca_system_ids in CA_INFO [media] tm6000: fix a macro coding style issue tm6000: Remove some ugly debug code [media] Nova-S-Plus audio line input [media] [RFC,1/1] V4L2: Use new CAP bits in existing RDS capable drivers ...
2010-10-28Merge branch 'for-linus' of ↵Linus Torvalds7-7/+212
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: add new sdhci-pxa driver for Marvell SoCs mmc: make number of mmcblk minors configurable mmc_spi: Recover from CRC errors for r/w operation over SPI. mmc: sdhci-pltfm: add -pltfm driver for imx35/51 mmc: sdhci-of-esdhc: factor out common stuff mmc: sdhci_pltfm: pass more data on custom init call mmc: sdhci: introduce get_ro private write-protect hook mmc: sdhci-pltfm: move .h file into appropriate subdir mmc: sdhci-pltfm: Add structure for host-specific data mmc: fix cb710 kconfig dependency warning mmc: cb710: remove debugging printk (info duplicated from mmc-core) mmc: cb710: clear irq handler on init() error path mmc: cb710: remove unnecessary msleep() mmc: cb710: implement get_cd() callback mmc: cb710: partially demystify clock selection mmc: add a file to debugfs for changing host clock at runtime mmc: sdhci: allow for eMMC 74 clock generation by controller mmc: sdhci: highspeed: check for mmc as well as sd cards mmc: sdhci: Add Moorestown device support mmc: sdhci: Intel Medfield support ...
2010-10-28Merge branch 'for-linus' of ↵Linus Torvalds3-0/+59
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (28 commits) net/9p: Return error on read with NULL buffer 9p: Add datasync to client side TFSYNC/RFSYNC for dotl net/9p: Return error if we fail to encode protocol data fs/9p: Use generic_file_open with lookup_instantiate_filp fs/9p: Add missing iput in v9fs_vfs_lookup fs/9p: Use mknod 9p operation on create without open request net/9p: Add waitq to VirtIO transport. [net/9p]Serialize virtqueue operations to make VirtIO transport SMP safe. 9p: Implement TREADLINK operation for 9p2000.L 9p: Use V9FS_MAGIC in statfs 9p: Implement TGETLOCK 9p: Implement TLOCK [9p] Introduce client side TFSYNC/RFSYNC for dotl. [fs/9p] Add file_operations for cached mode in dotl protocol. fs/9p: Add access = client option to opt in acl evaluation. fs/9p: Implement create time inheritance fs/9p: Update ACL on chmod fs/9p: Implement setting posix acl fs/9p: Add xattr callbacks for POSIX ACL fs/9p: Implement POSIX ACL permission checking function ...
2010-10-28mmu_notifier.h: fix comment spellingFigo.zhang1-1/+1
Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28Fix compile brekage with !CONFIG_BLOCKIngo Molnar1-0/+1
Today's git tree fails to build on !CONFIG_BLOCK, due to upstream commit 367a51a33902 ("fs: Add FITRIM ioctl"): include/linux/fs.h:36: error: expected specifier-qualifier-list before ‘uint64_t’ include/linux/fs.h:36: error: expected specifier-qualifier-list before ‘uint64_t’ include/linux/fs.h:36: error: expected specifier-qualifier-list before ‘uint64_t’ The commit adds uint64_t type usage to fs.h, but linux/types.h is not included explicitly - it's only included implicitly via linux/blk_types.h, and there only if CONFIG_BLOCK is enabled. Add the explicit #include to fix this. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-289p: Add datasync to client side TFSYNC/RFSYNC for dotlVenkateswararao Jujjuri (JV)1-1/+1
SYNOPSIS size[4] Tfsync tag[2] fid[4] datasync[4] size[4] Rfsync tag[2] DESCRIPTION The Tfsync transaction transfers ("flushes") all modified in-core data of file identified by fid to the disk device (or other permanent storage device) where that file resides. If datasync flag is specified data will be fleshed but does not flush modified metadata unless that metadata is needed in order to allow a subsequent data retrieval to be correctly handled. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-289p: Implement TREADLINK operation for 9p2000.LM. Mohan Kumar2-0/+3
Synopsis size[4] TReadlink tag[2] fid[4] size[4] RReadlink tag[2] target[s] Description Readlink is used to return the contents of the symoblic link referred by fid. Contents of symboic link is returned as a response. target[s] - Contents of the symbolic link referred by fid. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-289p: Use V9FS_MAGIC in statfsM. Mohan Kumar1-0/+1
Use V9FS_MAGIC as the file system type while filling kernel statfs strucutre instead of using host file system magic number. Also move the definition of V9FS_MAGIC from v9fs.h to standard magic.h file. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-289p: Implement TGETLOCKM. Mohan Kumar2-0/+19
Synopsis size[4] TGetlock tag[2] fid[4] getlock[n] size[4] RGetlock tag[2] getlock[n] Description TGetlock is used to test for the existence of byte range posix locks on a file identified by given fid. The reply contains getlock structure. If the lock could be placed it returns F_UNLCK in type field of getlock structure. Otherwise it returns the details of the conflicting locks in the getlock structure getlock structure: type[1] - Type of lock: F_RDLCK, F_WRLCK start[8] - Starting offset for lock length[8] - Number of bytes to check for the lock If length is 0, check for lock in all bytes starting at the location 'start' through to the end of file pid[4] - PID of the process that wants to take lock/owns the task in case of reply client[4] - Client id of the system that owns the process which has the conflicting lock Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-289p: Implement TLOCKM. Mohan Kumar2-0/+29
Synopsis size[4] TLock tag[2] fid[4] flock[n] size[4] RLock tag[2] status[1] Description Tlock is used to acquire/release byte range posix locks on a file identified by given fid. The reply contains status of the lock request flock structure: type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK flags[4] - Flags could be either of P9_LOCK_FLAGS_BLOCK - Blocked lock request, if there is a conflicting lock exists, wait for that lock to be released. P9_LOCK_FLAGS_RECLAIM - Reclaim lock request, used when client is trying to reclaim a lock after a server restrart (due to crash) start[8] - Starting offset for lock length[8] - Number of bytes to lock If length is 0, lock all bytes starting at the location 'start' through to the end of file pid[4] - PID of the process that wants to take lock client_id[4] - Unique client id status[1] - Status of the lock request, can be P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or P9_LOCK_GRACE(3) P9_LOCK_SUCCESS - Request was successful P9_LOCK_BLOCKED - A conflicting lock is held by another process P9_LOCK_ERROR - Error while processing the lock request P9_LOCK_GRACE - Server is in grace period, it can't accept new lock requests in this period (except locks with P9_LOCK_FLAGS_RECLAIM flag set) Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28[9p] Introduce client side TFSYNC/RFSYNC for dotl.Venkateswararao Jujjuri (JV)2-0/+3
SYNOPSIS size[4] Tfsync tag[2] fid[4] size[4] Rfsync tag[2] DESCRIPTION The Tfsync transaction transfers ("flushes") all modified in-core data of file identified by fid to the disk device (or other permanent storage device) where that file resides. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28net/9p: This patch implements TLERROR/RLERROR on the 9P client.Arun R Bharadwaj1-0/+4
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-27Merge branch 'next' into upstream-mergeTheodore Ts'o7-180/+307
Conflicts: fs/ext4/inode.c fs/ext4/mballoc.c include/trace/events/ext4.h
2010-10-27ext4,jbd2: convert tracepoints to use major/minor numbersTheodore Ts'o2-156/+251
Unfortunately perf can't deal with anything other than direct structure accesses in the TP_printk() section. It will drop dead when it sees jbd2_dev_to_name() in the "print fmt" section of the tracepoint. Addresses-Google-Bug: 3138508 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27Merge branch 'next' of ↵Linus Torvalds3-18/+280
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (48 commits) DMAENGINE: move COH901318 to arch_initcall dma: imx-dma: fix signedness bug dma/timberdale: simplify conditional ste_dma40: remove channel_type ste_dma40: remove enum for endianess ste_dma40: remove TIM_FOR_LINK option ste_dma40: move mode_opt to separate config ste_dma40: move channel mode to a separate field ste_dma40: move priority to separate field ste_dma40: add variable to indicate valid dma_cfg async_tx: make async_tx channel switching opt-in move async raid6 test to lib/Kconfig.debug dmaengine: Add Freescale i.MX1/21/27 DMA driver intel_mid_dma: change the slave interface intel_mid_dma: fix the WARN_ONs intel_mid_dma: Add sg list support to DMA driver intel_mid_dma: Allow DMAC2 to share interrupt intel_mid_dma: Allow IRQ sharing intel_mid_dma: Add runtime PM support DMAENGINE: define a dummy filter function for ste_dma40 ...
2010-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300Linus Torvalds1-9/+10
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits) MN10300: Save frame pointer in thread_info struct rather than global var MN10300: Change "Matsushita" to "Panasonic". MN10300: Create a defconfig for the ASB2364 board MN10300: Update the ASB2303 defconfig MN10300: ASB2364: Add support for SMSC911X and SMC911X MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA MN10300: Generic time support MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support MN10300: Map userspace atomic op regs as a vmalloc page MN10300: And Panasonic AM34 subarch and implement SMP MN10300: Delete idle_timestamp from irq_cpustat_t MN10300: Make various interrupt priority settings configurable MN10300: Optimise do_csum() MN10300: Implement atomic ops using atomic ops unit MN10300: Make the FPU operate in non-lazy mode under SMP MN10300: SMP TLB flushing MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control MN10300: Make the use of PIDR to mark TLB entries controllable MN10300: Rename __flush_tlb*() to local_flush_tlb*() MN10300: AM34 erratum requires MMUCTR read and write on exception entry ...
2010-10-27Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds3-47/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits) perf python scripting: Add futex-contention script perf python scripting: Fixup cut'n'paste error in sctop script perf scripting: Shut up 'perf record' final status perf record: Remove newline character from perror() argument perf python scripting: Support fedora 11 (audit 1.7.17) perf python scripting: Improve the syscalls-by-pid script perf python scripting: print the syscall name on sctop perf python scripting: Improve the syscalls-counts script perf python scripting: Improve the failed-syscalls-by-pid script kprobes: Remove redundant text_mutex lock in optimize x86/oprofile: Fix uninitialized variable use in debug printk tracing: Fix 'faild' -> 'failed' typo perf probe: Fix format specified for Dwarf_Off parameter perf trace: Fix detection of script extension perf trace: Use $PERF_EXEC_PATH in canned report scripts perf tools: Document event modifiers perf tools: Remove direct slang.h include perf_events: Fix for transaction recovery in group_sched_in() perf_events: Revert: Fix transaction recovery in group_sched_in() perf, x86: Use NUMA aware allocations for PEBS/BTS/DS allocations ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 00:25:32 +0000