summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-02-09Merge tag 'zonefs-5.6-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull new zonefs file system from Damien Le Moal: "Zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with native zoned block device support (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the sequential write constraint of zoned block devices to the user. As a result, zonefs is not a POSIX compliant file system. Its goal is to simplify the implementation of zoned block devices support in applications by replacing raw block device file accesses with a richer file based API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application while at the same time allowing the use of zoned block devices with various programming languages other than C. Zonefs IO management implementation uses the new iomap generic code. Zonefs has been successfully tested using a functional test suite (available with zonefs userland format tool on github) and a prototype implementation of LevelDB on top of zonefs" * tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Add documentation fs: New zonefs file system
2020-02-09Merge tag 'x86-urgent-2020-02-09' of ↵Linus Torvalds2-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for X86: - Ensure that the PIT is set up when the local APIC is disable or configured in legacy mode. This is caused by an ordering issue introduced in the recent changes which skip PIT initialization when the TSC and APIC frequencies are already known. - Handle malformed SRAT tables during early ACPI parsing which caused an infinite loop anda boot hang. - Fix a long standing race in the affinity setting code which affects PCI devices with non-maskable MSI interrupts. The problem is caused by the non-atomic writes of the MSI address (destination APIC id) and data (vector) fields which the device uses to construct the MSI message. The non-atomic writes are mandated by PCI. If both fields change and the device raises an interrupt after writing address and before writing data, then the MSI block constructs a inconsistent message which causes interrupts to be lost and subsequent malfunction of the device. The fix is to redirect the interrupt to the new vector on the current CPU first and then switch it over to the new target CPU. This allows to observe an eventually raised interrupt in the transitional stage (old CPU, new vector) to be observed in the APIC IRR and retriggered on the new target CPU and the new vector. The potential spurious interrupts caused by this are harmless and can in the worst case expose a buggy driver (all handlers have to be able to deal with spurious interrupts as they can and do happen for various reasons). - Add the missing suspend/resume mechanism for the HYPERV hypercall page which prevents resume hibernation on HYPERV guests. This change got lost before the merge window. - Mask the IOAPIC before disabling the local APIC to prevent potentially stale IOAPIC remote IRR bits which cause stale interrupt lines after resume" * tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Mask IOAPIC entries when disabling the local APIC x86/hyperv: Suspend/resume the hypercall page for hibernation x86/apic/msi: Plug non-maskable MSI affinity race x86/boot: Handle malformed SRAT tables during early ACPI parsing x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
2020-02-09Merge tag 'perf-urgent-2020-02-09' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A set of fixes and improvements for the perf subsystem: Kernel fixes: - Install cgroup events to the correct CPU context to prevent a potential list double add - Prevent an integer underflow in the perf mlock accounting - Add a missing prototype for arch_perf_update_userpage() Tooling: - Add a missing unlock in the error path of maps__insert() in perf maps. - Fix the build with the latest libbfd - Fix the perf parser so it does not delete parse event terms, which caused a regression for using perf with the ARM CoreSight as the sink configuration was missing due to the deletion. - Fix the double free in the perf CPU map merging test case - Add the missing ustring support for the perf probe command" * tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf maps: Add missing unlock to maps__insert() error case perf probe: Add ustring support for perf probe command perf: Make perf able to build with latest libbfd perf test: Fix test case Merge cpu map perf parse: Copy string to perf_evsel_config_term perf parse: Refactor 'struct perf_evsel_config_term' kernel/events: Add a missing prototype for arch_perf_update_userpage() perf/cgroups: Install cgroup events to correct cpuctx perf/core: Fix mlock accounting in perf_mmap()
2020-02-09Merge tag 'irq-urgent-2020-02-09' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem: - Provision only ACPI enabled redistributors on GICv3 - Use the proper command colums when building the INVALL command for the GICv3-ITS - Ensure the allocation of the L2 vPE table for GICv4.1 - Correct the GICv4.1 VPROBASER programming so it uses the proper size - A set of small GICv4.1 tidy up patches - Configuration cleanup for C-SKY interrupt chip - Clarify the function documentation for irq_set_wake() to document that the wakeup functionality is orthogonal to the irq disable/enable mechanism" * tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors irqchip/gic-v3-its: Remove superfluous WARN_ON irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd() irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level irqchip/gic-v4.1: Set vpe_l1_base for all redistributors irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE genirq: Clarify that irq wake state is orthogonal to enable/disable irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL irqchip: Some Kconfig cleanup for C-SKY irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
2020-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds6-13/+24
Pull networking fixes from David Miller: 1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris. 2) Fix thermal zone registration in iwlwifi, from Andrei Otcheretianski. 3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer. 4) Use after free in mptcp, from Florian Westphal. 5) Use after free in wireguard's root_remove_peer_lists, from Eric Dumazet. 6) Properly access packets heads in bonding alb code, from Eric Dumazet. 7) Fix data race in skb_queue_len(), from Qian Cai. 8) Fix regression in r8169 on some chips, from Heiner Kallweit. 9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang. 10) Certain kinds of set link netlink operations can cause a NULL deref in the ipv6 addrconf code. Fix from Eric Dumazet. 11) Don't cancel uninitialized work queue in drop monitor, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: thunderx: use proper interface type for RGMII mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap bpf: Improve bucket_log calculation logic selftests/bpf: Test freeing sockmap/sockhash with a socket in it bpf, sockhash: Synchronize_rcu before free'ing map bpf, sockmap: Don't sleep while holding RCU lock on tear-down bpftool: Don't crash on missing xlated program instructions bpf, sockmap: Check update requirements after locking drop_monitor: Do not cancel uninitialized work item mlxsw: spectrum_dpipe: Add missing error path mlxsw: core: Add validation of hardware device types for MGPIR register mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort selftests: mlxsw: Add test cases for local table route replacement mlxsw: spectrum_router: Prevent incorrect replacement of local table routes net: dsa: microchip: enable module autoprobe ipv6/addrconf: fix potential NULL deref in inet6_set_link_af() dpaa_eth: support all modes with rate adapting PHYs net: stmmac: update pci platform data to use phy_interface net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter ...
2020-02-08Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-0/+22
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late, or that had more complex dependencies on more than one topic branch that makes sense to keep separately. - TI support for secure accelerators and hwrng on OMAP4/5 - TI camera changes for dra7 and am437x and SGX improvement due to better reset control support on am335x, am437x and dra7 - Davinci moves to proper clocksource on DM365, and regulator/audio improvements for DM365 and DM644x eval boards" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: OMAP2+: Drop legacy platform data for omap4 des ARM: OMAP2+: Drop legacy platform data for omap4 sham ARM: OMAP2+: Drop legacy platform data for omap4 aes ...
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds19-223/+540
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds5-71/+551
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-02-08Merge branch 'merge.nfs-fs_parse.1' of ↵Linus Torvalds6-71/+78
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs file system parameter updates from Al Viro: "Saner fs_parser.c guts and data structures. The system-wide registry of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is the horror switch() in fs_parse() that would have to grow another case every time something got added to that system-wide registry. New syntax types can be added by filesystems easily now, and their namespace is that of functions - not of system-wide enum members. IOW, they can be shared or kept private and if some turn out to be widely useful, we can make them common library helpers, etc., without having to do anything whatsoever to fs_parse() itself. And we already get that kind of requests - the thing that finally pushed me into doing that was "oh, and let's add one for timeouts - things like 15s or 2h". If some filesystem really wants that, let them do it. Without somebody having to play gatekeeper for the variants blessed by direct support in fs_parse(), TYVM. Quite a bit of boilerplate is gone. And IMO the data structures make a lot more sense now. -200LoC, while we are at it" * 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits) tmpfs: switch to use of invalfc() cgroup1: switch to use of errorfc() et.al. procfs: switch to use of invalfc() hugetlbfs: switch to use of invalfc() cramfs: switch to use of errofc() et.al. gfs2: switch to use of errorfc() et.al. fuse: switch to use errorfc() et.al. ceph: use errorfc() and friends instead of spelling the prefix out prefix-handling analogues of errorf() and friends turn fs_param_is_... into functions fs_parse: handle optional arguments sanely fs_parse: fold fs_parameter_desc/fs_parameter_spec fs_parser: remove fs_parameter_description name field add prefix to fs_context->log ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log new primitive: __fs_parse() switch rbd and libceph to p_log-based primitives struct p_log, variants of warnf() et.al. taking that one instead teach logfc() to handle prefices, give it saner calling conventions get rid of cg_invalf() ...
2020-02-08Merge branch 'work.misc' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: - bmap series from cmaiolino - getting rid of convolutions in copy_mount_options() (use a couple of copy_from_user() instead of the __get_user() crap) * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: saner copy_mount_options() fibmap: Reject negative block numbers fibmap: Use bmap instead of ->bmap method in ioctl_fibmap ecryptfs: drop direct calls to ->bmap cachefiles: drop direct usage of ->bmap method. fs: Enable bmap() function to properly return errors
2020-02-08Merge branch 'pipe-exclusive-wakeup'Linus Torvalds1-1/+1
Merge thundering herd avoidance on pipe IO. This would have been applied for 5.5 already, but got delayed because of a user-space race condition in the GNU make jobserver code. Now that there's a new GNU make 4.3 release, and most distributions seem to have at least applied the (almost three year old) fix for the problem, let's see if people notice. And it might have been just bad random timing luck on my machine. If you do hit the race condition, things will still work, but the symptom is that you don't get nearly the expected parallelism when using "make -j<N>". The jobserver bug can definitely happen without this patch too, but seems to be easier to trigger when we no longer wake up pipe waiters unnecessarily. * pipe-exclusive-wakeup: pipe: use exclusive waits when reading or writing
2020-02-08pipe: use exclusive waits when reading or writingLinus Torvalds1-1/+1
This makes the pipe code use separate wait-queues and exclusive waiting for readers and writers, avoiding a nasty thundering herd problem when there are lots of readers waiting for data on a pipe (or, less commonly, lots of writers waiting for a pipe to have space). While this isn't a common occurrence in the traditional "use a pipe as a data transport" case, where you typically only have a single reader and a single writer process, there is one common special case: using a pipe as a source of "locking tokens" rather than for data communication. In particular, the GNU make jobserver code ends up using a pipe as a way to limit parallelism, where each job consumes a token by reading a byte from the jobserver pipe, and releases the token by writing a byte back to the pipe. This pattern is fairly traditional on Unix, and works very well, but will waste a lot of time waking up a lot of processes when only a single reader needs to be woken up when a writer releases a new token. A simplified test-case of just this pipe interaction is to create 64 processes, and then pass a single token around between them (this test-case also intentionally passes another token that gets ignored to test the "wake up next" logic too, in case anybody wonders about it): #include <unistd.h> int main(int argc, char **argv) { int fd[2], counters[2]; pipe(fd); counters[0] = 0; counters[1] = -1; write(fd[1], counters, sizeof(counters)); /* 64 processes */ fork(); fork(); fork(); fork(); fork(); fork(); do { int i; read(fd[0], &i, sizeof(i)); if (i < 0) continue; counters[0] = i+1; write(fd[1], counters, (1+(i & 1)) *sizeof(int)); } while (counters[0] < 1000000); return 0; } and in a perfect world, passing that token around should only cause one context switch per transfer, when the writer of a token causes a directed wakeup of just a single reader. But with the "writer wakes all readers" model we traditionally had, on my test box the above case causes more than an order of magnitude more scheduling: instead of the expected ~1M context switches, "perf stat" shows 231,852.37 msec task-clock # 15.857 CPUs utilized 11,250,961 context-switches # 0.049 M/sec 616,304 cpu-migrations # 0.003 M/sec 1,648 page-faults # 0.007 K/sec 1,097,903,998,514 cycles # 4.735 GHz 120,781,778,352 instructions # 0.11 insn per cycle 27,997,056,043 branches # 120.754 M/sec 283,581,233 branch-misses # 1.01% of all branches 14.621273891 seconds time elapsed 0.018243000 seconds user 3.611468000 seconds sys before this commit. After this commit, I get 5,229.55 msec task-clock # 3.072 CPUs utilized 1,212,233 context-switches # 0.232 M/sec 103,951 cpu-migrations # 0.020 M/sec 1,328 page-faults # 0.254 K/sec 21,307,456,166 cycles # 4.074 GHz 12,947,819,999 instructions # 0.61 insn per cycle 2,881,985,678 branches # 551.096 M/sec 64,267,015 branch-misses # 2.23% of all branches 1.702148350 seconds time elapsed 0.004868000 seconds user 0.110786000 seconds sys instead. Much better. [ Note! This kernel improvement seems to be very good at triggering a race condition in the make jobserver (in GNU make 4.2.1) for me. It's a long known bug that was fixed back in June 2017 by GNU make commit b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to avoid hangs."). But there wasn't a new release of GNU make until 4.3 on Jan 19 2020, so a number of distributions may still have the buggy version. Some have backported the fix to their 4.2.1 release, though, and even without the fix it's quite timing-dependent whether the bug actually is hit. ] Josh Triplett says: "I've been hammering on your pipe fix patch (switching to exclusive wait queues) for a month or so, on several different systems, and I've run into no issues with it. The patch *substantially* improves parallel build times on large (~100 CPU) systems, both with parallel make and with other things that use make's pipe-based jobserver. All current distributions (including stable and long-term stable distributions) have versions of GNU make that no longer have the jobserver bug" Tested-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-08Merge tag 'irqchip-fixes-5.6-1' of ↵Thomas Gleixner1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes for 5.6, take #1 from Marc Zyngier: - Guarantee allocation of L2 vPE table for GICv4.1 - Fix GICv4.1 VPROPBASER programming - Numerous GICv4.1 tidy ups - Fix disabled GICv3 redistributor provisioning with ACPI - KConfig cleanup for C-SKY
2020-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-2/+5
Daniel Borkmann says: ==================== pull-request: bpf 2020-02-07 The following pull-request contains BPF updates for your *net* tree. We've added 15 non-merge commits during the last 10 day(s) which contain a total of 12 files changed, 114 insertions(+), 31 deletions(-). The main changes are: 1) Various BPF sockmap fixes related to RCU handling in the map's tear- down code, from Jakub Sitnicki. 2) Fix macro state explosion in BPF sk_storage map when calculating its bucket_log on allocation, from Martin KaFai Lau. 3) Fix potential BPF sockmap update race by rechecking socket's established state under lock, from Lorenz Bauer. 4) Fix crash in bpftool on missing xlated instructions when kptr_restrict sysctl is set, from Toke Høiland-Jørgensen. 5) Fix i40e's XSK wakeup code to return proper error in busy state and various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski. 6) Fix the way modifiers are skipped in BTF in the verifier while walking pointers to avoid program rejection, from Alexei Starovoitov. 7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and ii) to fix undefined reference linker errors for older gcc version due to order of passed gcc parameters, from Yulia Kartseva and Song Liu. 8) Fix a trampoline_count BPF kselftest warning about missing braces around initializer, from Andrii Nakryiko. 9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in bpftool, from Michal Rostecki. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-08irqchip/gic-v4.1: Set vpe_l1_base for all redistributorsZenghui Yu1-1/+1
Currently, we will not set vpe_l1_page for the current RD if we can inherit the vPE configuration table from another RD (or ITS), which results in an inconsistency between RDs within the same CommonLPIAff group. Let's rename it to vpe_l1_base to indicate the base address of the vPE configuration table of this RD, and set it properly for *all* v4.1 redistributors. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-3-yuzenghui@huawei.com
2020-02-07Merge tag 'nfs-for-5.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds7-15/+18
Puyll NFS client updates from Anna Schumaker: "Stable bugfixes: - Fix memory leaks and corruption in readdir # v2.6.37+ - Directory page cache needs to be locked when read # v2.6.37+ New features: - Convert NFS to use the new mount API - Add "softreval" mount option to let clients use cache if server goes down - Add a config option to compile without UDP support - Limit the number of inactive delegations the client can cache at once - Improved readdir concurrency using iterate_shared() Other bugfixes and cleanups: - More 64-bit time conversions - Add additional diagnostic tracepoints - Check for holes in swapfiles, and add dependency on CONFIG_SWAP - Various xprtrdma cleanups to prepare for 5.7's changes - Several fixes for NFS writeback and commit handling - Fix acls over krb5i/krb5p mounts - Recover from premature loss of openstateids - Fix NFS v3 chacl and chmod bug - Compare creds using cred_fscmp() - Use kmemdup_nul() in more places - Optimize readdir cache page invalidation - Lease renewal and recovery fixes" * tag 'nfs-for-5.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (93 commits) NFSv4.0: nfs4_do_fsinfo() should not do implicit lease renewals NFSv4: try lease recovery on NFS4ERR_EXPIRED NFS: Fix memory leaks nfs: optimise readdir cache page invalidation NFS: Switch readdir to using iterate_shared() NFS: Use kmemdup_nul() in nfs_readdir_make_qstr() NFS: Directory page cache pages need to be locked when read NFS: Fix memory leaks and corruption in readdir SUNRPC: Use kmemdup_nul() in rpc_parse_scope_id() NFS: Replace various occurrences of kstrndup() with kmemdup_nul() NFSv4: Limit the total number of cached delegations NFSv4: Add accounting for the number of active delegations held NFSv4: Try to return the delegation immediately when marked for return on close NFS: Clear NFS_DELEGATION_RETURN_IF_CLOSED when the delegation is returned NFSv4: nfs_inode_evict_delegation() should set NFS_DELEGATION_RETURNING NFS: nfs_find_open_context() should use cred_fscmp() NFS: nfs_access_get_cached_rcu() should use cred_fscmp() NFSv4: pnfs_roc() must use cred_fscmp() to compare creds NFS: remove unused macros nfs: Return EINVAL rather than ERANGE for mount parse errors ...
2020-02-07Merge branch 'i2c/for-5.6' of ↵Linus Torvalds2-60/+58
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "i2c core: - huge improvements and refactorizations of the Linux I2C documentation (lots of thanks to Luca for doing it and Jean for the careful review) - subsystem wide API conversion to i2c_new_client_device() - remove obsolete parport-light driver - smaller core updates (removal of 'extern', enabling more compile testing, use more helper macros) - and quite a bunch of driver updates (new IDs, simplifications, better PM, support of atomic transfers and other improvements) i2c-mux: - The main feature is the idle-state rework of the pca954x driver from Biwen Li at24 driver: - minor maintenance: update the license tag, sort headers - move support for the write-protect pin into nvmem core - add a reference to the new wp-gpios property in nvmem to at25 bindings - add support for regulator and pm_runtime control" * 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (91 commits) i2c: cros-ec-tunnel: Fix ACPI identifier i2c: cros-ec-tunnel: Fix slave device enumeration i2c: stm32f7: add PM_SLEEP suspend/resume support i2c: cadence: Fix wording in i2c-cadence driver i2c: cadence: Fix power management order of operations i2c: cadence: Fix error printing in case of defer i2c: cadence: Handle transfer_size rollover i2c: i801: Add support for Intel Comet Lake PCH-V docs: i2c: writing-clients: properly name the stop condition docs: i2c: i2c-protocol: use same wording as smbus-protocol docs: i2c: rename sections so the overall picture is clearer docs: i2c: old-module-parameters: use monospace instead of "" docs: i2c: old-module-parameters: clarify this is for obsolete kernels docs: i2c: old-module-parameters: fix internal hyperlink docs: i2c: instantiating-devices: use monospace for sysfs attributes docs: i2c: instantiating-devices: rearrange static instatiation docs: i2c: instantiating-devices: fix internal hyperlink docs: i2c: smbus-protocol: improve I2C Block transactions description docs: i2c: smbus-protocol: fix punctuation docs: i2c: smbus-protocol: fix typo ...
2020-02-07Merge tag 'drm-next-2020-02-07' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-2/+3
Pull drm fixes from Dave Airlie: "Just some fixes for this merge window: the tegra changes fix some regressions in the merge, nouveau has a few modesetting fixes. The amdgpu fixes are bit bigger, but they contain a couple of weeks of fixes, and don't seem to contain anything that isn't really a fix. Summary: tegra: - merge window regression fixes nouveau: - couple of volta/turing modesetting fixes amdgpu: - EDC fixes for Arcturus - GDDR6 memory training fixe - Fix for reading gfx clockgating registers while in GFXOFF state - i2c freq fixes - Misc display fixes - TLB invalidation fix when using semaphores - VCN 2.5 instancing fixes - Switch raven1 gfxoff to a blacklist - Coreboot workaround for KV/KB - Root cause dongle fixes for display and revert workaround - Enable GPU reset for renoir and navi - Navi overclocking fixes - Fix up confusing warnings in display clock validation on raven amdkfd: - SDMA fix radeon: - Misc LUT fixes" * tag 'drm-next-2020-02-07' of git://anongit.freedesktop.org/drm/drm: (90 commits) gpu: host1x: Set DMA direction only for DMA-mapped buffer objects drm/tegra: Reuse IOVA mapping where possible drm/tegra: Relax IOMMU usage criteria on old Tegra drm/amd/dm/mst: Ignore payload update failures drm/amdgpu: update default voltage for boot od table for navi1x drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltage drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latency drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2) drm/amdgpu: fetch default VDDC curve voltages (v2) drm/amdgpu/smu_v11_0: Correct behavior of restoring default tables (v2) drm/amdgpu/navi10: add OD_RANGE for navi overclocking drm/amdgpu/navi: fix index for OD MCLK drm/amd/display: Fix HW/SW state mismatch drm/amd/display: Fix a typo when computing dsc configuration drm/amd/powerplay: fix navi10 system intermittent reboot issue V2 drm/amdkfd: Fix a bug in SDMA RLC queue counting under HWS mode drm/amd/display: Only enable cursor on pipes that need it drm/nouveau/kms/gv100-: avoid sending a core update until the first modeset drm/nouveau/kms/gv100-: move window ownership setup into modesetting path drm/nouveau/disp/gv100-: halt NV_PDISP_FE_RM_INTR_STAT_CTRL_DISP_ERROR storms ...
2020-02-07Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A collection of fixes: - Make of_clk.h self contained - Fix new qcom DT bindings that just merged to match the DTS files - Fix qcom clk driver to properly detect DFS clk frequencies - Fix the ls1028a driver to not deref a pointer before assigning it" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: of: clk: Make <linux/of_clk.h> self-contained clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for videocc-sc7180 dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180 clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for gpucc-sc7180 dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998 clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for dispcc-sc7180 clk: qcom: Get rid of fallback global names for dispcc-sc7180 dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180 clk: qcom: rcg2: Don't crash if our parent can't be found; return an error clk: ls1028a: fix a dereference of pointer 'parent' before a null check dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()
2020-02-07Merge tag 'linux-watchdog-5.6-rc1' of ↵Linus Torvalds2-0/+39
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add IT8786 chipset ID - addition of sam9x60 compatible watchdog - da9062 improvements - fix UAF in reboot notifier handling in watchdog core code - other fixes and small improvements * tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9062: make restart handler atomic safe watchdog: mtk_wdt: mt2712: Add reset controller watchdog: mtk_wdt: mt8183: Add reset controller dt-bindings: mediatek: mt2712: Add #reset-cells dt-bindings: mediatek: mt8183: Add #reset-cells dt-bindings: watchdog: da9062: add suspend disable option watchdog: it87_wdt: add IT8786 ID watchdog: dw_wdt: ping watchdog to reset countdown before start watchdog: fix UAF in reboot notifier handling in watchdog core code watchdog: cadence: Skip printing pointer value watchdog: qcom: Use platform_get_irq_optional() for bark irq watchdog: da9062: add power management ops watchdog: make DesignWare watchdog allow users to set bigger timeout value drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
2020-02-07prefix-handling analogues of errorf() and friendsAl Viro1-0/+4
called errorfc/infofc/warnfc/invalfc Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07turn fs_param_is_... into functionsAl Viro1-24/+14
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07fs_parse: handle optional arguments sanelyAl Viro1-1/+0
Don't bother with "mixed" options that would allow both the form with and without argument (i.e. both -o foo and -o foo=bar). Rather than trying to shove both into a single fs_parameter_spec, allow having with-argument and no-argument specs with the same name and teach fs_parse to handle that. There are very few options of that sort, and they are actually easier to handle that way - callers end up with less postprocessing. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07fs_parse: fold fs_parameter_desc/fs_parameter_specAl Viro4-12/+11
The former contains nothing but a pointer to an array of the latter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07fs_parser: remove fs_parameter_description name fieldEric Sandeen1-3/+4
Unused now. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07add prefix to fs_context->logAl Viro2-6/+11
... turning it into struct p_log embedded into fs_context. Initialize the prefix with fs_type->name, turning fs_parse() into a trivial inline wrapper for __fs_parse(). This makes fs_parameter_description->name completely unused. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_logAl Viro1-2/+3
... and now errorf() et.al. are never called with NULL fs_context, so we can get rid of conditional in those. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07new primitive: __fs_parse()Al Viro2-4/+6
fs_parse() analogue taking p_log instead of fs_context. fs_parse() turned into a wrapper, callers in ceph_common and rbd switched to __fs_parse(). As the result, fs_parse() never gets NULL fs_context and neither do fs_context-based logging primitives Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07struct p_log, variants of warnf() et.al. taking that one insteadAl Viro1-0/+11
primitives for prefixed logging Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07teach logfc() to handle prefices, give it saner calling conventionsAl Viro1-6/+10
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07get rid of fs_value_is_filename_emptyAl Viro1-1/+0
Its behaviour is identical to that of fs_value_is_filename. It makes no sense, anyway - LOOKUP_EMPTY affects nothing whatsoever once the pathname has been imported from userland. And both fs_value_is_filename and fs_value_is_filename_empty carry an already imported pathname. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07don't bother with explicit length argument for __lookup_constant()Al Viro1-3/+1
Have the arrays of constant_table self-terminated (by NULL ->name in the final entry). Simplifies lookup_constant() and allows to reuse the search for enum params as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07fs: New zonefs file systemDamien Le Moal1-0/+1
zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-02-07fold struct fs_parameter_enum into struct constant_tableAl Viro1-5/+0
no real difference now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07fs_parse: get rid of ->enumsAl Viro1-19/+19
Don't do a single array; attach them to fsparam_enum() entry instead. And don't bother trying to embed the names into those - it actually loses memory, with no real speedup worth mentioning. Simplifies validation as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07Pass consistent param->type to fs_parse()Al Viro1-1/+0
As it is, vfs_parse_fs_string() makes "foo" and "foo=" indistinguishable; both get fs_value_is_string for ->type and NULL for ->string. To make it even more unpleasant, that combination is impossible to produce with fsconfig(). Much saner rules would be "foo" => fs_value_is_flag, NULL "foo=" => fs_value_is_string, "" "foo=bar" => fs_value_is_string, "bar" All cases are distinguishable, all results are expressable by fsconfig(), ->has_value checks are much simpler that way (to the point of the field being useless) and quite a few regressions go away (gfs2 has no business accepting -o nodebug=, for example). Partially based upon patches from Miklos. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07Merge tag 'amd-drm-next-5.6-2020-02-05' of ↵Dave Airlie1-2/+3
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.6-2020-02-05: amdgpu: - EDC fixes for Arcturus - GDDR6 memory training fixe - Fix for reading gfx clockgating registers while in GFXOFF state - i2c freq fixes - Misc display fixes - TLB invalidation fix when using semaphores - VCN 2.5 instancing fixes - Switch raven1 gfxoff to a blacklist - Coreboot workaround for KV/KB - Root cause dongle fixes for display and revert workaround - Enable GPU reset for renoir and navi - Navi overclocking fixes - Fix up confusing warnings in display clock validation on raven amdkfd: - SDMA fix radeon: - Misc LUT fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200206035458.3894-1-alexander.deucher@amd.com
2020-02-06net/mlx5: Deprecate usage of generic TLS HW capability bitTariq Toukan1-3/+4
Deprecate the generic TLS cap bit, use the new TX-specific TLS cap bit instead. Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-06Merge tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+5
Pull more KVM updates from Paolo Bonzini: "s390: - fix register corruption - ENOTSUPP/EOPNOTSUPP mixed - reset cleanups/fixes - selftests x86: - Bug fixes and cleanups - AMD support for APIC virtualization even in combination with in-kernel PIT or IOAPIC. MIPS: - Compilation fix. Generic: - Fix refcount overflow for zero page" * tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit x86: vmxfeatures: rename features for consistency with KVM and manual KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses KVM: x86: Fix perfctr WRMSR for running counters x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs() kvm: mmu: Separate generating and setting mmio ptes kvm: mmu: Replace unsigned with unsigned int for PTE access KVM: nVMX: Remove stale comment from nested_vmx_load_cr3() KVM: MIPS: Fold comparecount_func() into comparecount_wakeup() KVM: MIPS: Fix a build error due to referencing not-yet-defined function x86/kvm: do not setup pv tlb flush when not paravirtualized KVM: fix overflow of zero page refcount with ksm running KVM: x86: Take a u64 when checking for a valid dr7 value KVM: x86: use raw clock values consistently KVM: x86: reorganize pvclock_gtod_data members KVM: nVMX: delete meaningless nested_vmx_run() declaration KVM: SVM: allow AVIC without split irqchip kvm: ioapic: Lazy update IOAPIC EOI ...
2020-02-06Merge tag 'sound-fix-5.6-rc1' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of pending small fixes: ALSA core: - PCM memory leak fix ASoC: - Lots of SOF and Intel driver fixes - Addition of COMMON_CLK for wcd934x - Regression fixes for AMD and Tegra platforms HD-audio: - DP-MST HDMI regression fix, Tegra workarounds, HP quirk fix Others: - A few fixes relevant with the recent uapi-updates - Sparse warnings and endianness fixes" * tag 'sound-fix-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits) ALSA: hda: Clear RIRB status before reading WP ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS ALSA: hda - Fix DP-MST support for NVIDIA codecs ASoC: wcd934x: Add missing COMMON_CLK dependency MAINTAINERS: Remove the Bard Liao from the MAINTAINERS of Realtek CODECs ASoC: tegra: Revert 24 and 32 bit support ASoC: SOF: Intel: add PCI ID for JasperLake ALSA: hdsp: Make the firmware loading ioctl a bit more readable ALSA: emu10k1: Fix annotation and cast for the recent uapi header change ALSA: dummy: Fix PCM format loop in proc output ALSA: usb-audio: Annotate endianess in Scarlett gen2 quirk ALSA: usb-audio: Fix endianess in descriptor validation ALSA: hda: Add JasperLake PCI ID and codec vid ALSA: pcm: Fix sparse warnings wrt snd_pcm_state_t ALSA: pcm: Fix memory leak at closing a stream without hw_free ALSA: uapi: Fix sparse warning ASoC: rt715: Add __maybe_unused to PM callbacks ASoC: rt711: Add __maybe_unused to PM callbacks ASoC: rt700: Add __maybe_unused to PM callbacks ...
2020-02-06skbuff: fix a data race in skb_queue_len()Qian Cai1-1/+13
sk_buff.qlen can be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96: unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821 net/unix/af_unix.c:1761 ____sys_sendmsg+0x33e/0x370 ___sys_sendmsg+0xa6/0xf0 __sys_sendmsg+0x69/0xf0 __x64_sys_sendmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99: __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029 __skb_try_recv_datagram+0xbe/0x220 unix_dgram_recvmsg+0xee/0x850 ____sys_recvmsg+0x1fb/0x210 ___sys_recvmsg+0xa2/0xf0 __sys_recvmsg+0x66/0xf0 __x64_sys_recvmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe Since only the read is operating as lockless, it could introduce a logic bug in unix_recvq_full() due to the load tearing. Fix it by adding a lockless variant of skb_queue_len() and unix_recvq_full() where READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to the commit d7d16a89350a ("net: add skb_queue_empty_lockless()"). Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-06Merge tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds3-5/+9
Pull ceph fixes from Ilya Dryomov: - a set of patches that fixes various corner cases in mount and umount code (Xiubo Li). This has to do with choosing an MDS, distinguishing between laggy and down MDSes and parsing the server path. - inode initialization fixes (Jeff Layton). The one included here mostly concerns things like open_by_handle() and there is another one that will come through Al. - copy_file_range() now uses the new copy-from2 op (Luis Henriques). The existing copy-from op turned out to be infeasible for generic filesystem use; we disable the copy offload if OSDs don't support copy-from2. - a patch to link "rbd" and "block" devices together in sysfs (Hannes Reinecke) ... and a smattering of cleanups from Xiubo, Jeff and Chengguang. * tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client: (25 commits) rbd: set the 'device' link in sysfs ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c ceph: print name of xattr in __ceph_{get,set}xattr() douts ceph: print r_direct_hash in hex in __choose_mds() dout ceph: use copy-from2 op in copy_file_range ceph: close holes in structs ceph_mds_session and ceph_mds_request rbd: work around -Wuninitialized warning ceph: allocate the correct amount of extra bytes for the session features ceph: rename get_session and switch to use ceph_get_mds_session ceph: remove the extra slashes in the server path ceph: add possible_max_rank and make the code more readable ceph: print dentry offset in hex and fix xattr_version type ceph: only touch the caps which have the subset mask requested ceph: don't clear I_NEW until inode metadata is fully populated ceph: retry the same mds later after the new session is opened ceph: check availability of mds cluster on mount after wait timeout ceph: keep the session state until it is released ceph: add __send_request helper ceph: ensure we have a new cap before continuing in fill_inode ceph: drop unused ttl_from parameter from fill_inode ...
2020-02-06Merge tag 'trace-v5.6-2' of ↵Linus Torvalds5-66/+416
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Added new "bootconfig". This looks for a file appended to initrd to add boot config options, and has been discussed thoroughly at Linux Plumbers. Very useful for adding kprobes at bootup. Only enabled if "bootconfig" is on the real kernel command line. - Created dynamic event creation. Merges common code between creating synthetic events and kprobe events. - Rename perf "ring_buffer" structure to "perf_buffer" - Rename ftrace "ring_buffer" structure to "trace_buffer" Had to rename existing "trace_buffer" to "array_buffer" - Allow trace_printk() to work withing (some) tracing code. - Sort of tracing configs to be a little better organized - Fixed bug where ftrace_graph hash was not being protected properly - Various other small fixes and clean ups * tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits) bootconfig: Show the number of nodes on boot message tools/bootconfig: Show the number of bootconfig nodes bootconfig: Add more parse error messages bootconfig: Use bootconfig instead of boot config ftrace: Protect ftrace_graph_hash with ftrace_sync ftrace: Add comment to why rcu_dereference_sched() is open coded tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu tracing: Annotate ftrace_graph_hash pointer with __rcu bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline tracing: Use seq_buf for building dynevent_cmd string tracing: Remove useless code in dynevent_arg_pair_add() tracing: Remove check_arg() callbacks from dynevent args tracing: Consolidate some synth_event_trace code tracing: Fix now invalid var_ref_vals assumption in trace action tracing: Change trace_boot to use synth_event interface tracing: Move tracing selftests to bottom of menu tracing: Move mmio tracer config up with the other tracers tracing: Move tracing test module configs together tracing: Move all function tracing configs together tracing: Documentation for in-kernel synthetic event API ...
2020-02-06Merge tag 'io_uring-5.6-2020-02-05' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+14
Pull io_uring updates from Jens Axboe: "Some later fixes for io_uring: - Small cleanup series from Pavel - Belt and suspenders build time check of sqe size and layout (Stefan) - Addition of ->show_fdinfo() on request of Jann Horn, to aid in understanding mapped personalities - eventfd recursion/deadlock fix, for both io_uring and aio - Fixup for send/recv handling - Fixup for double deferral of read/write request - Fix for potential double completion event for close request - Adjust fadvise advice async/inline behavior - Fix for shutdown hang with SQPOLL thread - Fix for potential use-after-free of fixed file table" * tag 'io_uring-5.6-2020-02-05' of git://git.kernel.dk/linux-block: io_uring: cleanup fixed file data table references io_uring: spin for sq thread to idle on shutdown aio: prevent potential eventfd recursion on poll io_uring: put the flag changing code in the same spot io_uring: iterate req cache backwards io_uring: punt even fadvise() WILLNEED to async context io_uring: fix sporadic double CQE entry for close io_uring: remove extra ->file check io_uring: don't map read/write iovec potentially twice io_uring: use the proper helpers for io_send/recv io_uring: prevent potential eventfd recursion on poll eventfd: track eventfd_signal() recursion depth io_uring: add BUILD_BUG_ON() to assert the layout of struct io_uring_sqe io_uring: add ->show_fdinfo() for the io_uring file descriptor
2020-02-06Merge tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull libata updates from Jens Axboe: - Add a Sandisk CF card to supported pata_pcmcia list (Christian) - Move pata_arasan_cf away from legacy API (Peter) - Ensure ahci DMA/ints are shut down on shutdown (Prabhakar) * tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block: ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel() ata: ahci: Add shutdown to freeze hardware resources of ahci pata_pcmia: add SanDisk High (>8G) CF card to supported list
2020-02-05of: clk: Make <linux/of_clk.h> self-containedGeert Uytterhoeven1-0/+3
Depending on include order: include/linux/of_clk.h:11:45: warning: ‘struct device_node’ declared inside parameter list will not be visible outside of this definition or declaration unsigned int of_clk_get_parent_count(struct device_node *np); ^~~~~~~~~~~ include/linux/of_clk.h:12:43: warning: ‘struct device_node’ declared inside parameter list will not be visible outside of this definition or declaration const char *of_clk_get_parent_name(struct device_node *np, int index); ^~~~~~~~~~~ include/linux/of_clk.h:13:31: warning: ‘struct of_device_id’ declared inside parameter list will not be visible outside of this definition or declaration void of_clk_init(const struct of_device_id *matches); ^~~~~~~~~~~~ Fix this by adding forward declarations for struct device_node and struct of_device_id. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lkml.kernel.org/r/20200205194649.31309-1-geert+renesas@glider.be Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-05Merge tag 'pwm/for-5.6-rc1' of ↵Linus Torvalds1-0/+58
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Mostly cleanups and minor improvements with some new chip support for some drivers" * tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits) pwm: Remove set but not set variable 'pwm' pwm: sun4i: Initialize variables before use pwm: stm32: Remove automatic output enable pwm: sun4i: Narrow scope of local variable pwm: bcm2835: Allow building for ARCH_BRCMSTB pwm: imx27: Eliminate error message for defer probe pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR pwm: sun4i: Move pwm_calculate() out of spin_lock() pwm: omap-dmtimer: Allow compiling with COMPILE_TEST pwm: omap-dmtimer: put_device() after of_find_device_by_node() pwm: omap-dmtimer: Simplify error handling pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional pwm: Implement tracing for .get_state() and .apply_state() pwm: rcar: Document inability to set duty_cycle = 0 pwm: rcar: Drop useless call to pwm_get_state() pwm: Fix minor Kconfig whitespace issues pwm: atmel: Implement .get_state() pwm: atmel: Use register accessors for channels pwm: atmel: Document known weaknesses of both hardware and software pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation ...
2020-02-05Merge tag 'iommu-updates-v5.6' of ↵Linus Torvalds5-20/+102
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Allow compiling the ARM-SMMU drivers as modules. - Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code collected by Will Deacon. The merge-commit (6855d1ba7537) has all the details. - Cleanup of the iommu_put_resv_regions() call-backs in various drivers. - AMD IOMMU driver cleanups. - Update for the x2APIC support in the AMD IOMMU driver. - Preparation patches for Intel VT-d nested mode support. - RMRR and identity domain handling fixes for the Intel VT-d driver. - More small fixes and cleanups. * tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits) iommu/amd: Remove the unnecessary assignment iommu/vt-d: Remove unnecessary WARN_ON_ONCE() iommu/vt-d: Unnecessary to handle default identity domain iommu/vt-d: Allow devices with RMRRs to use identity domain iommu/vt-d: Add RMRR base and end addresses sanity check iommu/vt-d: Mark firmware tainted if RMRR fails sanity check iommu/amd: Remove unused struct member iommu/amd: Replace two consecutive readl calls with one readq iommu/vt-d: Don't reject Host Bridge due to scope mismatch PCI/ATS: Add PASID stubs iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device iommu/arm-smmu-v3: Improve add_device() error handling iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE iommu/arm-smmu-v3: Add second level of context descriptor table iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure iommu/arm-smmu-v3: Propagate ssid_bits iommu/arm-smmu-v3: Add support for Substream IDs iommu/arm-smmu-v3: Add context descriptor tables allocators iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support ACPI/IORT: Parse SSID property of named component node ...
2020-02-05Merge tag 'for-linus-5.6-rc1-tag' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - fix a bug introduced in 5.5 in the Xen gntdev driver - fix the Xen balloon driver when running on ancient Xen versions - allow Xen stubdoms to control interrupt enable flags of passed-through PCI cards - release resources in Xen backends under memory pressure * tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/blkback: Consistently insert one empty line between functions xen/blkback: Remove unnecessary static variable name prefixes xen/blkback: Squeeze page pools if a memory pressure is detected xenbus/backend: Protect xenbus callback with lock xenbus/backend: Add memory pressure handler callback xen/gntdev: Do not use mm notifiers with autotranslating guests xen/balloon: Support xend-based toolstack take two xen-pciback: optionally allow interrupt enable flag writes
2020-02-05Merge tag 'kvm-s390-next-5.6-1' of ↵Paolo Bonzini1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes and cleanups for 5.6 - fix register corruption - ENOTSUPP/EOPNOTSUPP mixed - reset cleanups/fixes - selftests