summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-05-02RDMA/core: Get xmit slave for LAGMaor Gottlieb1-0/+2
Add a call to rdma_lag_get_ah_roce_slave() when the address handle is created. Lower driver can use it to select the QP's affinity port. Link: https://lore.kernel.org/r/20200430192146.12863-15-maorg@mellanox.com Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-02RDMA/core: Add LAG functionalityMaor Gottlieb2-0/+24
Add support to get the RoCE LAG xmit slave by building skb of the RoCE packet and call to master_get_xmit_slave. If driver wants to get the slave assume all slaves are available, then need to set RDMA_LAG_FLAGS_HASH_ALL_SLAVES in flags. Link: https://lore.kernel.org/r/20200430192146.12863-14-maorg@mellanox.com Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-02RDMA: Group create AH arguments in structMaor Gottlieb1-2/+7
Following patch adds additional argument to the create AH function, so it make sense to group ah_attr and flags arguments in struct. Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Acked-by: Devesh Sharma <devesh.sharma@broadcom.com> Acked-by: Gal Pressman <galpress@amazon.com> Acked-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-02Merge branch 'mellanox/mlx5-next' into rdma.git for-nextJason Gunthorpe4-1/+20
From the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Required for dependencies in following patches * mellanox/mlx5-next: net/mlx5: Add support to get lag physical port net/mlx5: Change lag mutex lock to spin lock bonding: Implement ndo_get_xmit_slave bonding: Add array of all slaves bonding: Add function to get the xmit slave in active-backup mode bonding: Add helper function to get the xmit slave in rr mode bonding: Add helper function to get the xmit slave based on hash bonding/alb: Add helper functions to get the xmit slave bonding: Rename slave_arr to usable_slaves bonding: Export skip slave logic to function net/core: Introduce netdev_get_xmit_slave
2020-05-01net/mlx5: Add support to get lag physical portMaor Gottlieb1-0/+2
Add function to get the device physical port of the lag slave. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-01bonding: Add array of all slavesMaor Gottlieb1-1/+2
Keep all slaves in array so it could be used to get the xmit slave assume all the slaves are active. The logic to add slave to the array is like the usable slaves, except that we also add slaves that currently can't transmit - not up or active. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-01bonding/alb: Add helper functions to get the xmit slaveMaor Gottlieb1-0/+4
Add two helper functions to get the xmit slave of bond in alb or tlb mode. Extract the logic of find the xmit slave from the xmit flow to function. Xmit flow will xmit through this slave and in the following patches the new .ndo will call to the helper function to return the xmit slave. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-01bonding: Rename slave_arr to usable_slavesMaor Gottlieb1-1/+1
Rename slave_arr to usable_slaves, since we will have two arrays, one for the usable slaves and the other to all slaves. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-01net/core: Introduce netdev_get_xmit_slaveMaor Gottlieb1-0/+12
Add new ndo to get the xmit slave of master device. The reference counters are not incremented so the caller must be careful with locks. User can ask to get the xmit slave assume all the slaves can transmit by set all_slaves arg to true. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28Merge branch 'mlx5_ib_qp_refactor_1' into rdma.git for-nextJason Gunthorpe8-134/+187
Leon Romanovsky says: ==================== This is first part of series which tries to return some sanity to mlx5_ib_create_qp() function. Such refactoring is required to make extension of that function with less worries of breaking driver. Extra goal of such refactoring is to ensure that QP is allocated at the beginning of function and released at the end. It will allow us to move QP allocation to be under IB/core responsibility. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Due to dependencies * branch 'mlx5_ib_qp_refactor_1': (66 commits) RDMA/mlx5: Process all vendor flags in one place RDMA/mlx5: Return all configured create flags through query QP RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags RDMA/mlx5: Use flags_en mechanism to mark QP created with WQE signature RDMA/mlx5: Process create QP flags in one place RDMA/mlx5: Delete create QP flags obfuscation RDMA/mlx5: Initial separation of RAW_PACKET QP from common flow RDMA/mlx5: Remove second copy from user for non RSS RAW QPs RDMA/mlx5: Move DRIVER QP flags check into separate function RDMA/mlx5: Update all DRIVER QP places to use QP subtype RDMA/mlx5: Split scatter CQE configuration for DCT QP RDMA/mlx5: Separate create QP flows to be based on type RDMA/mlx5: Set QP subtype immediately when it is known RDMA/mlx5: Avoid setting redundant NULL for XRC QPs RDMA/mlx5: Prepare QP allocation for future removal RDMA/mlx5: Perform check if QP creation flow is valid RDMA/mlx5: Delete impossible GSI port check RDMA/mlx5: Organize QP types checks in one place Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-04-28net/mlx5: TX WQE Add trailer insertion fieldRaed Salem1-0/+6
Add new TX WQE field for Connect-X6DX trailer insertion support, when set, the HW adds a trailer to the packet, the WQE trailer association flags are used to set to HW the header which the trailer belongs. Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Add release all pages capability bitEran Ben Elisha1-1/+3
Add a bit in HCA capabilities layout to indicate if release all pages is supported. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Introduce TLS RX offload hardware bitsTariq Toukan2-4/+19
Add TLS RX offload related IFC hardware fields and enumerations. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Add structure and defines for pci sync for fw update eventMoshe Shemesh2-1/+18
Add needed structure layouts and defines for pci sync for fw update event. The downstream patches will include event handlers for this event type. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Add structure layout and defines for MFRL registerMoshe Shemesh2-0/+25
Add needed structure layouts and defines for MFRL (Management Firmware Reset Level) register. This structure will be used for the firmware upgrade and reset flow in the downstream patches. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Refactor imm_inval_pkey field in cqe structRaed Salem1-1/+6
The imm_inval_pkey field can hold four different types of data, depends on the usage, the data could be one of the below: - Immediate field of the received message - Invalidate rkey - Pkey of the packet - Flow table metadata Current implementation doesn't reflect the intended usage of the field at usage time. Reflect the different types by replace this field with a union, modify code where this field is used to reflect its intended usage. Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Use aligned variable while allocating ICM memoryErez Shitrit1-1/+2
The alignment value is part of the input structure, so use it and spare extra memory allocation when is not needed. Now, using the new ability when allocating icm for Direct-Rule insertion. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Introduce IPsec Connect-X offload hardware bits and structuresRaed Salem2-3/+79
Add IPsec offload related IFC structs, layouts and enumerations. Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Add support for COPY steering actionHuy Nguyen1-4/+4
Add COPY type to modify_header action. IPsec feature is the first feature that needs COPY steering action. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update transobj.c new cmd interfaceLeon Romanovsky1-13/+6
Do mass update of transobj.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update cq.c to new cmd interfaceLeon Romanovsky1-1/+1
Do mass update of cq.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update vport.c to new cmd interfaceLeon Romanovsky1-2/+1
Do mass update of vport.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Enable SW-defined RoCEv2 UDP source portMark Zhang1-1/+4
When this is enabled, UDP source port for RoCEv2 packets are defined by software instead of firmware. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Move QP logic to mlx5_ibLeon Romanovsky3-98/+0
The mlx5_core doesn't need any functionality coded in qp.c, so move that file to drivers/infiniband/ be under mlx5_ib responsibility. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Remove Q counter low level helper APIsLeon Romanovsky1-4/+0
mlx5 core users are encouraged to use low level API (mlx5_cmd_exec) without the need of helper functions, do this for q counters, remove helper functions and call mlx5_cmd_exec directly from users. This will help reduce the total amount of code and reduction of the mlx5_core symbol table. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Provide simplified command interfacesLeon Romanovsky1-0/+13
Many mlx5_cmd_exec() callers are not interested in the output from that command or have standard in/out structures. Those callers simply allocate those structure on the stack and use sizeof() to provide in/out arguments. In this naive approach provide simplified versions of mlx5_cmd_exec(). Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-14RDMA/cma: Limit the scope of rdma_is_consumer_reject functionLeon Romanovsky1-8/+0
The function is local to cma.c, so let's limit its scope. Link: https://lore.kernel.org/r/20200413132323.930869-1-leon@kernel.org Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-04-12Merge tag 'locking-urgent-2020-04-12' of ↵Linus Torvalds1-5/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Three small fixes/updates for the locking core code: - Plug a task struct reference leak in the percpu rswem implementation. - Document the refcount interaction with PID_MAX_LIMIT - Improve the 'invalid wait context' data dump in lockdep so it contains all information which is required to decode the problem" * tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Improve 'invalid wait context' splat locking/refcount: Document interaction with PID_MAX_LIMIT locking/percpu-rwsem: Fix a task_struct refcount
2020-04-11Merge tag 'kbuild-v5.7-2' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - raise minimum supported binutils version to 2.23 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports - move remaining CONFIG_AS_* tests to Kconfig from Makefile - enable -Wtautological-compare warnings to catch more issues - do not support GCC plugins for GCC <= 4.7 - fix various breakages of 'make xconfig' - include the linker version used for linking the kernel into LINUX_COMPILER, which is used for the banner, and also exposed to /proc/version - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which allows us to remove the lib-ksyms.o workaround, and to solve the last known issue of the LLVM linker - add dummy tools in scripts/dummy-tools/ to enable all compiler tests in Kconfig, which will be useful for distro maintainers - support the single switch, LLVM=1 to use Clang and all LLVM utilities instead of GCC and Binutils. - support LLVM_IAS=1 to enable the integrated assembler, which is still experimental * tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits) kbuild: fix comment about missing include guard detection kbuild: support LLVM=1 to switch the default tools to Clang/LLVM kbuild: replace AS=clang with LLVM_IAS=1 kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory kbuild: remove -I$(srctree)/tools/include from scripts/Makefile kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h Documentation/llvm: fix the name of llvm-size kbuild: mkcompile_h: Include $LD version in /proc/version kconfig: qconf: Fix a few alignment issues kconfig: qconf: remove some old bogus TODOs kconfig: qconf: fix support for the split view mode kconfig: qconf: fix the content of the main widget kconfig: qconf: Change title for the item window kconfig: qconf: clean deprecated warnings gcc-plugins: drop support for GCC <= 4.7 kbuild: Enable -Wtautological-compare x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2 crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean' ...
2020-04-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds7-15/+73
Merge yet more updates from Andrew Morton: - Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc, gup, hugetlb, pagemap, memremap) - Various other things (hfs, ocfs2, kmod, misc, seqfile) * akpm: (34 commits) ipc/util.c: sysvipc_find_ipc() should increase position index kernel/gcov/fs.c: gcov_seq_next() should increase position index fs/seq_file.c: seq_read(): add info message about buggy .next functions drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings change email address for Pali Rohár selftests: kmod: test disabling module autoloading selftests: kmod: fix handling test numbers above 9 docs: admin-guide: document the kernel.modprobe sysctl fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once() kmod: make request_module() return an error when autoloading is disabled mm/memremap: set caching mode for PCI P2PDMA memory to WC mm/memory_hotplug: add pgprot_t to mhp_params powerpc/mm: thread pgprot_t through create_section_mapping() x86/mm: introduce __set_memory_prot() x86/mm: thread pgprot_t through init_memory_mapping() mm/memory_hotplug: rename mhp_restrictions to mhp_params mm/memory_hotplug: drop the flags field from struct mhp_restrictions mm/special: create generic fallbacks for pte_special() and pte_mkspecial() mm/vma: introduce VM_ACCESS_FLAGS mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS ...
2020-04-10Merge tag 'for-linus-5.7-rc1b-tag' of ↵Linus Torvalds3-14/+15
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - two cleanups - fix a boot regression introduced in this merge window - fix wrong use of memory allocation flags * tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: fix booting 32-bit pv guest x86/xen: make xen_pvmmu_arch_setup() static xen/blkfront: fix memory allocation flags in blkfront_setup_indirect() xen: Use evtchn_type_t as a type for event channels
2020-04-10change email address for Pali RohárPali Rohár1-1/+1
For security reasons I stopped using gmail account and kernel address is now up-to-date alias to my personal address. People periodically send me emails to address which they found in source code of drivers, so this change reflects state where people can contact me. [ Added .mailmap entry as per Joe Perches - Linus ] Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10mm/memory_hotplug: add pgprot_t to mhp_paramsLogan Gunthorpe1-0/+3
devm_memremap_pages() is currently used by the PCI P2PDMA code to create struct page mappings for IO memory. At present, these mappings are created with PAGE_KERNEL which implies setting the PAT bits to be WB. However, on x86, an mtrr register will typically override this and force the cache type to be UC-. In the case firmware doesn't set this register it is effectively WB and will typically result in a machine check exception when it's accessed. Other arches are not currently likely to function correctly seeing they don't have any MTRR registers to fall back on. To solve this, provide a way to specify the pgprot value explicitly to arch_add_memory(). Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a simple change to pass the pgprot_t down to their respective functions which set up the page tables. For x86_32, set the page tables explicitly using _set_memory_prot() (seeing they are already mapped). For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this should be fine, for now, seeing these architectures don't support ZONE_DEVICE. A check in __add_pages() is also added to ensure the pgprot parameter was set for all arches. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10mm/memory_hotplug: rename mhp_restrictions to mhp_paramsLogan Gunthorpe1-8/+8
The mhp_restrictions struct really doesn't specify anything resembling a restriction anymore so rename it to be mhp_params as it is a list of extended parameters. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200306170846.9333-3-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10mm/memory_hotplug: drop the flags field from struct mhp_restrictionsLogan Gunthorpe1-2/+0
Patch series "Allow setting caching mode in arch_add_memory() for P2PDMA", v4. Currently, the page tables created using memremap_pages() are always created with the PAGE_KERNEL cacheing mode. However, the P2PDMA code is creating pages for PCI BAR memory which should never be accessed through the cache and instead use either WC or UC. This still works in most cases, on x86, because the MTRR registers typically override the caching settings in the page tables for all of the IO memory to be UC-. However, this tends not to work so well on other arches or some rare x86 machines that have firmware which does not setup the MTRR registers in this way. Instead of this, this series proposes a change to arch_add_memory() to take the pgprot required by the mapping which allows us to explicitly set pagetable entries for P2PDMA memory to UC. This changes is pretty routine for most of the arches: x86_64, arm64 and powerpc simply need to thread the pgprot through to where the page tables are setup. x86_32 unfortunately sets up the page tables at boot so must use _set_memory_prot() to change their caching mode. ia64, s390 and sh don't appear to have an easy way to change the page tables so, for now at least, we just return -EINVAL on such mappings and thus they will not support P2PDMA memory until the work for this is done. This should be fine as they don't yet support ZONE_DEVICE. This patch (of 7): This variable is not used anywhere and should therefore be removed from the structure. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/20200306170846.9333-2-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10mm/special: create generic fallbacks for pte_special() and pte_mkspecial()Anshuman Khandual1-0/+12
Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL but required to define quite similar fallback stubs for special page table entry helpers such as pte_special() and pte_mkspecial(), as they get build in generic MM without a config check. This creates two generic fallback stub definitions for these helpers, eliminating much code duplication. mips platform has a special case where pte_special() and pte_mkspecial() visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires. This restricts those symbol visibility in order to avoid redefinitions which is now exposed through this new generic stubs and subsequent build failure. arm platform set_pte_at() definition needs to be moved into a C file just to prevent a build failure. [anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas] Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Stafford Horne <shorne@gmail.com> [openrisc] Acked-by: Helge Deller <deller@gmx.de> [parisc] Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Brian Cain <bcain@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Sam Creasey <sammy@sammy.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paulburton@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10mm/vma: introduce VM_ACCESS_FLAGSAnshuman Khandual1-1/+5
There are many places where all basic VMA access flags (read, write, exec) are initialized or checked against as a group. One such example is during page fault. Existing vma_is_accessible() wrapper already creates the notion of VMA accessibility as a group access permissions. Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which will not only reduce code duplication but also extend the VMA accessibility concept in general. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Springer <rspringer@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10mm/vma: define a default value for VM_DATA_DEFAULT_FLAGSAnshuman Khandual1-0/+14
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the existing VM_STACK_DEFAULT_FLAGS. While here, also define some more macros with standard VMA access flag combinations that are used frequently across many platforms. Apart from simplification, this reduces code duplication as well. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paulburton@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10mm/memory.c: add vm_insert_pages()Arjun Roy1-0/+2
Add the ability to insert multiple pages at once to a user VM with lower PTE spinlock operations. The intention of this patch-set is to reduce atomic ops for tcp zerocopy receives, which normally hits the same spinlock multiple times consecutively. [akpm@linux-foundation.org: pte_alloc() no longer takes the `addr' argument] [arjunroy@google.com: add missing page_count() check to vm_insert_pages()] Link: http://lkml.kernel.org/r/20200214005929.104481-1-arjunroy.kdev@gmail.com [arjunroy@google.com: vm_insert_pages() checks if pte_index defined] Link: http://lkml.kernel.org/r/20200228054714.204424-2-arjunroy.kdev@gmail.com Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Miller <davem@davemloft.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20200128025958.43490-2-arjunroy.kdev@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10mm: hugetlb: optionally allocate gigantic hugepages using cmaRoman Gushchin1-0/+12
Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime") has added the run-time allocation of gigantic pages. However it actually works only at early stages of the system loading, when the majority of memory is free. After some time the memory gets fragmented by non-movable pages, so the chances to find a contiguous 1GB block are getting close to zero. Even dropping caches manually doesn't help a lot. At large scale rebooting servers in order to allocate gigantic hugepages is quite expensive and complex. At the same time keeping some constant percentage of memory in reserved hugepages even if the workload isn't using it is a big waste: not all workloads can benefit from using 1 GB pages. The following solution can solve the problem: 1) On boot time a dedicated cma area* is reserved. The size is passed as a kernel argument. 2) Run-time allocations of gigantic hugepages are performed using the cma allocator and the dedicated cma area In this case gigantic hugepages can be allocated successfully with a high probability, however the memory isn't completely wasted if nobody is using 1GB hugepages: it can be used for pagecache, anon memory, THPs, etc. * On a multi-node machine a per-node cma area is allocated on each node. Following gigantic hugetlb allocation are using the first available numa node if the mask isn't specified by a user. Usage: 1) configure the kernel to allocate a cma area for hugetlb allocations: pass hugetlb_cma=10G as a kernel argument 2) allocate hugetlb pages as usual, e.g. echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages If the option isn't enabled or the allocation of the cma area failed, the current behavior of the system is preserved. x86 and arm-64 are covered by this patch, other architectures can be trivially added later. The patch contains clean-ups and fixes proposed and implemented by Aslan Bakirov and Randy Dunlap. It also contains ideas and suggestions proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks! Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Aslan Bakirov <aslan@fb.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Joonsoo Kim <js1304@gmail.com> Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10mm: cma: NUMA node interfaceAslan Bakirov2-2/+15
I've noticed that there is no interface exposed by CMA which would let me to declare contigous memory on particular NUMA node. This patchset adds the ability to try to allocate contiguous memory on a specific node. It will fallback to other nodes if the specified one doesn't work. Implement a new method for declaring contigous memory on particular node and keep cma_declare_contiguous() as a wrapper. [akpm@linux-foundation.org: build fix] Signed-off-by: Aslan Bakirov <aslan@fb.com> Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Andreas Schaufler <andreas.schaufler@gmx.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Rik van Riel <riel@surriel.com> Cc: Joonsoo Kim <js1304@gmail.com> Link: http://lkml.kernel.org/r/20200407163840.92263-2-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10docs: mm: slab.h: fix a broken cross-referenceMauro Carvalho Chehab1-1/+1
There is a typo at the cross-reference link, causing this warning: include/linux/slab.h:11: WARNING: undefined label: memory-allocation (if the link has no caption the label must precede a section header) Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: http://lkml.kernel.org/r/0aeac24235d356ebd935d11e147dcc6edbb6465c.1586359676.git.mchehab+huawei@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10printk: queue wake_up_klogd irq_work only if per-CPU areas are readySergey Senozhatsky1-5/+0
printk_deferred(), similarly to printk_safe/printk_nmi, does not immediately attempt to print a new message on the consoles, avoiding calls into non-reentrant kernel paths, e.g. scheduler or timekeeping, which potentially can deadlock the system. Those printk() flavors, instead, rely on per-CPU flush irq_work to print messages from safer contexts. For same reasons (recursive scheduler or timekeeping calls) printk() uses per-CPU irq_work in order to wake up user space syslog/kmsg readers. However, only printk_safe/printk_nmi do make sure that per-CPU areas have been initialised and that it's safe to modify per-CPU irq_work. This means that, for instance, should printk_deferred() be invoked "too early", that is before per-CPU areas are initialised, printk_deferred() will perform illegal per-CPU access. Lech Perczak [0] reports that after commit 1b710b1b10ef ("char/random: silence a lockdep splat with printk()") user-space syslog/kmsg readers are not able to read new kernel messages. The reason is printk_deferred() being called too early (as was pointed out by Petr and John). Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU areas are initialized. Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/ Reported-by: Lech Perczak <l.perczak@camlintechnologies.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Jann Horn <jannh@google.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: John Ogness <john.ogness@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull proc fix from Eric Biederman: "A brown paper bag slipped through my proc changes, and syzcaller caught it when the code ended up in your tree. I have opted to fix it the simplest cleanest way I know how, so there is no reasonable chance for the bug to repeat" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: Use a dedicated lock in struct pid
2020-04-10Merge tag 'pwm/for-5.7-rc1' of ↵Linus Torvalds3-93/+4
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "There's quite a few changes this time around. Most of these are fixes and cleanups, but there's also new chip support for some drivers and a bit of rework" * tag 'pwm/for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (33 commits) pwm: pca9685: Fix PWM/GPIO inter-operation pwm: Make pwm_apply_state_debug() static pwm: meson: Remove redundant assignment to variable fin_freq pwm: jz4740: Allow selection of PWM channels 0 and 1 pwm: jz4740: Obtain regmap from parent node pwm: jz4740: Improve algorithm of clock calculation pwm: jz4740: Use clocks from TCU driver pwm: sun4i: Remove redundant needs_delay pwm: omap-dmtimer: Implement .apply callback pwm: omap-dmtimer: Do not disable PWM before changing period/duty_cycle pwm: omap-dmtimer: Fix PWM enabling sequence pwm: omap-dmtimer: Update description for PWM OMAP DM timer pwm: omap-dmtimer: Drop unused header file pwm: renesas-tpu: Drop confusing registered message pwm: renesas-tpu: Fix late Runtime PM enablement pwm: rcar: Fix late Runtime PM enablement dt-bindings: pwm: renesas-tpu: Document more R-Car Gen2 support pwm: meson: Fix confusing indentation pwm: pca9685: Use gpio core provided macro GPIO_LINE_DIRECTION_OUT pwm: pca9685: Replace CONFIG_PM with __maybe_unused ...
2020-04-10Merge tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-3/+4
Pull more drm fixes from Dave Airlie: "As expected, more fixes did turn up in the latter part of the week. The drm_local_map build regression fix is here, along with temporary disabling of the hugepage work due to some amdgpu related crashes. Otherwise it's just a bunch of i915, and amdgpu fixes. legacy: - fix drm_local_map.offset type ttm: - temporarily disable hugepages to debug amdgpu problems. prime: - fix sg extraction amdgpu: - Various Renoir fixes - Fix gfx clockgating sequence on gfx10 - RAS fixes - Avoid MST property creation after registration - Various cursor/viewport fixes - Fix a confusing log message about optional firmwares i915: - Flush all the reloc_gpu batch (Chris) - Ignore readonly failures when updating relocs (Chris) - Fill all the unused space in the GGTT (Chris) - Return the right vswing table (Jose) - Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre) analogix_dp: - probe fix virtio: - oob fix in object create" * tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/ttm: Temporarily disable the huge_fault() callback drm/bridge: analogix_dp: Split bind() into probe() and real bind() drm/legacy: Fix type for drm_local_map.offset drm/amdgpu/display: fix warning when compiling without debugfs drm/amdgpu: unify fw_write_wait for new gfx9 asics drm/amd/powerplay: error out on forcing clock setting not supported drm/amdgpu: fix gfx hang during suspend with video playback (v2) drm/amd/display: Check for null fclk voltage when parsing clock table drm/amd/display: Acknowledge wm_optimized_required drm/amd/display: Make cursor source translation adjustment optional drm/amd/display: Calculate scaling ratios on every medium/full update drm/amd/display: Program viewport when source pos changes for DCN20 hw seq drm/amd/display: Fix incorrect cursor pos on scaled primary plane drm/amd/display: change default pipe_split policy for DCN1 drm/amd/display: Translate cursor position by source rect drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax drm/amd/display: Avoid create MST prop after registration drm/amdgpu/psp: dont warn on missing optional TA's drm/amdgpu: update RAS related dmesg print drm/amdgpu: resolve mGPU RAS query instability ...
2020-04-10Merge tag 'sound-fix-5.7-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes gathered since the previous update. ALSA core: - Regression fix for OSS PCM emulation ASoC: - Trivial fixes in reg bit mask ops, DAPM, DPCM and topology - Lots of fixes for Intel-based devices - Minor fixes for AMD, STM32, Qualcomm, Realtek Others: - Fixes for the bugs in mixer handling in HD-audio and ice1724 drivers that were caught by the recent kctl validator - New quirks for HD-audio and USB-audio Also this contains a fix for EDD firmware fix, which slipped from anyone's hands" * tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits) ALSA: hda: Add driver blacklist ALSA: usb-audio: Add mixer workaround for TRX40 and co ALSA: hda/realtek - Add quirk for MSI GL63 ALSA: ice1724: Fix invalid access for enumerated ctl items ALSA: hda: Fix potential access overflow in beep helper ASoC: cs4270: pull reset GPIO low then high ALSA: hda/realtek - Add HP new mute led supported for ALC236 ALSA: hda/realtek - Add supported new mute Led for HP ASoC: rt5645: Add platform-data for Medion E1239T ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet ASoC: stm32: sai: Add missing cleanup ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S ASoC: Intel: atom: Fix uninitialized variable compiler warning ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map() ASoC: SOF: Turn "firmware boot complete" message into a dbg message ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk ALSA: pcm: oss: Fix regression by buffer overflow fix (again) ALSA: pcm: oss: Fix regression by buffer overflow fix edd: Use scnprintf() for avoiding potential buffer overflow ...
2020-04-10Merge tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-blockLinus Torvalds2-30/+17
Pull block fixes from Jens Axboe: "Here's a set of fixes that should go into this merge window. This contains: - NVMe pull request from Christoph with various fixes - Better discard support for loop (Evan) - Only call ->commit_rqs() if we have queued IO (Keith) - blkcg offlining fixes (Tejun) - fix (and fix the fix) for busy partitions" * tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block: block: fix busy device checking in blk_drop_partitions again block: fix busy device checking in blk_drop_partitions nvmet-rdma: fix double free of rdma queue blk-mq: don't commit_rqs() if none were queued nvme-fc: Revert "add module to ops template to allow module references" nvme: fix deadlock caused by ANA update wrong locking nvmet-rdma: fix bonding failover possible NULL deref loop: Better discard support for block devices loop: Report EOPNOTSUPP properly nvmet: fix NULL dereference when removing a referral nvme: inherit stable pages constraint in the mpath stack device blkcg: don't offline parent blkcg first blkcg: rename blkcg->cgwb_refcnt to ->online_pin and always use it nvme-tcp: fix possible crash in recv error flow nvme-tcp: don't poll a non-live queue nvme-tcp: fix possible crash in write_zeroes processing nvmet-fc: fix typo in comment nvme-rdma: Replace comma with a semicolon nvme-fcloop: fix deallocation of working context nvme: fix compat address handling in several ioctls
2020-04-09Merge tag 'riscv-for-linus-5.7' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of new features: - Partial support for the Kendryte K210. There are still a few outstanding issues that I have patches for, but I don't actually have a board to test them so they're not included yet. - SBI v0.2 support. - Fixes to support for building with LLVM-based toolchains. The resulting images are known not to boot yet. I don't anticipate a part two, but I'll probably have something early in the RCs to finish up the K210 support" * tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits) riscv: create a loader.bin boot image for Kendryte SoC riscv: Kendryte K210 default config riscv: Add Kendryte K210 device tree riscv: Select required drivers for Kendryte SOC riscv: Add Kendryte K210 SoC support riscv: Add SOC early init support riscv: Unaligned load/store handling for M_MODE RISC-V: Support cpu hotplug RISC-V: Add supported for ordered booting method using HSM RISC-V: Add SBI HSM extension definitions RISC-V: Export SBI error to linux error mapping function RISC-V: Add cpu_ops and modify default booting method RISC-V: Move relocate and few other functions out of __init RISC-V: Implement new SBI v0.2 extensions RISC-V: Introduce a new config for SBI v0.1 RISC-V: Add SBI v0.2 extension definitions RISC-V: Add basic support for SBI v0.2 RISC-V: Mark existing SBI as 0.1 SBI. riscv: Use macro definition instead of magic number riscv: Add support to dump the kernel page tables ...
2020-04-09proc: Use a dedicated lock in struct pidEric W. Biederman1-0/+1
syzbot wrote: > ======================================================== > WARNING: possible irq lock inversion dependency detected > 5.6.0-syzkaller #0 Not tainted > -------------------------------------------------------- > swapper/1/0 just changed the state of lock: > ffffffff898090d8 (tasklist_lock){.+.?}-{2:2}, at: send_sigurg+0x9f/0x320 fs/fcntl.c:840 > but this lock took another, SOFTIRQ-unsafe lock in the past: > (&pid->wait_pidfd){+.+.}-{2:2} > > > and interrupts could create inverse lock ordering between them. > > > other info that might help us debug this: > Possible interrupt unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&pid->wait_pidfd); > local_irq_disable(); > lock(tasklist_lock); > lock(&pid->wait_pidfd); > <Interrupt> > lock(tasklist_lock); > > *** DEADLOCK *** > > 4 locks held by swapper/1/0: The problem is that because wait_pidfd.lock is taken under the tasklist lock. It must always be taken with irqs disabled as tasklist_lock can be taken from interrupt context and if wait_pidfd.lock was already taken this would create a lock order inversion. Oleg suggested just disabling irqs where I have added extra calls to wait_pidfd.lock. That should be safe and I think the code will eventually do that. It was rightly pointed out by Christian that sharing the wait_pidfd.lock was a premature optimization. It is also true that my pre-merge window testing was insufficient. So remove the premature optimization and give struct pid a dedicated lock of it's own for struct pid things. I have verified that lockdep sees all 3 paths where we take the new pid->lock and lockdep does not complain. It is my current day dream that one day pid->lock can be used to guard the task lists as well and then the tasklist_lock won't need to be held to deliver signals. That will require taking pid->lock with irqs disabled. Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/lkml/00000000000011d66805a25cd73f@google.com/ Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: syzbot+343f75cdeea091340956@syzkaller.appspotmail.com Reported-by: syzbot+832aabf700bc3ec920b9@syzkaller.appspotmail.com Reported-by: syzbot+f675f964019f884dbd0f@syzkaller.appspotmail.com Reported-by: syzbot+a9fb1457d720a55d6dc5@syzkaller.appspotmail.com Fixes: 7bc3e6e55acf ("proc: Use a list of inodes to flush from proc") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 21:07:25 +0000