| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch provides counters for SRv6 Behaviors as defined in [1],
section 6. For each SRv6 Behavior instance, counters defined in [1] are:
- the total number of packets that have been correctly processed;
- the total amount of traffic in bytes of all packets that have been
correctly processed;
In addition, this patch introduces a new counter that counts the number of
packets that have NOT been properly processed (i.e. errors) by an SRv6
Behavior instance.
Counters are not only interesting for network monitoring purposes (i.e.
counting the number of packets processed by a given behavior) but they also
provide a simple tool for checking whether a behavior instance is working
as we expect or not.
Counters can be useful for troubleshooting misconfigured SRv6 networks.
Indeed, an SRv6 Behavior can silently drop packets for very different
reasons (i.e. wrong SID configuration, interfaces set with SID addresses,
etc) without any notification/message to the user.
Due to the nature of SRv6 networks, diagnostic tools such as ping and
traceroute may be ineffective: paths used for reaching a given router can
be totally different from the ones followed by probe packets. In addition,
paths are often asymmetrical and this makes it even more difficult to keep
up with the journey of the packets and to understand which behaviors are
actually processing our traffic.
When counters are enabled on an SRv6 Behavior instance, it is possible to
verify if packets are actually processed by such behavior and what is the
outcome of the processing. Therefore, the counters for SRv6 Behaviors offer
an non-invasive observability point which can be leveraged for both traffic
monitoring and troubleshooting purposes.
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters
Troubleshooting using SRv6 Behavior counters
--------------------------------------------
Let's make a brief example to see how helpful counters can be for SRv6
networks. Let's consider a node where an SRv6 End Behavior receives an SRv6
packet whose Segment Left (SL) is equal to 0. In this case, the End
Behavior (which accepts only packets with SL >= 1) discards the packet and
increases the error counter.
This information can be leveraged by the network operator for
troubleshooting. Indeed, the error counter is telling the user that the
packet:
(i) arrived at the node;
(ii) the packet has been taken into account by the SRv6 End behavior;
(iii) but an error has occurred during the processing.
The error (iii) could be caused by different reasons, such as wrong route
settings on the node or due to an invalid SID List carried by the SRv6
packet. Anyway, the error counter is used to exclude that the packet did
not arrive at the node or it has not been processed by the behavior at
all.
Turning on/off counters for SRv6 Behaviors
------------------------------------------
Each SRv6 Behavior instance can be configured, at the time of its creation,
to make use of counters.
This is done through iproute2 which allows the user to create an SRv6
Behavior instance specifying the optional "count" attribute as shown in the
following example:
$ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0
per-behavior counters can be shown by adding "-s" to the iproute2 command
line, i.e.:
$ ip -s -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Impact of counters for SRv6 Behaviors on performance
====================================================
To determine the performance impact due to the introduction of counters in
the SRv6 Behavior subsystem, we have carried out extensive tests.
We chose to test the throughput achieved by the SRv6 End.DX2 Behavior
because, among all the other behaviors implemented so far, it reaches the
highest throughput which is around 1.5 Mpps (per core at 2.4 GHz on a
Xeon(R) CPU E5-2630 v3) on kernel 5.12-rc2 using packets of size ~ 100
bytes.
Three different tests were conducted in order to evaluate the overall
throughput of the SRv6 End.DX2 Behavior in the following scenarios:
1) vanilla kernel (without the SRv6 Behavior counters patch) and a single
instance of an SRv6 End.DX2 Behavior;
2) patched kernel with SRv6 Behavior counters and a single instance of
an SRv6 End.DX2 Behavior with counters turned off;
3) patched kernel with SRv6 Behavior counters and a single instance of
SRv6 End.DX2 Behavior with counters turned on.
All tests were performed on a testbed deployed on the CloudLab facilities
[2], a flexible infrastructure dedicated to scientific research on the
future of Cloud Computing.
Results of tests are shown in the following table:
Scenario (1): average 1504764,81 pps (~1504,76 kpps); std. dev 3956,82 pps
Scenario (2): average 1501469,78 pps (~1501,47 kpps); std. dev 2979,85 pps
Scenario (3): average 1501315,13 pps (~1501,32 kpps); std. dev 2956,00 pps
As can be observed, throughputs achieved in scenarios (2),(3) did not
suffer any observable degradation compared to scenario (1).
Thanks to Jakub Kicinski and David Ahern for their valuable suggestions
and comments provided during the discussion of the proposed RFCs.
[2] https://www.cloudlab.us
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tlb updates from Ingo Molnar:
"The x86 MM changes in this cycle were:
- Implement concurrent TLB flushes, which overlaps the local TLB
flush with the remote TLB flush.
In testing this improved sysbench performance measurably by a
couple of percentage points, especially if TLB-heavy security
mitigations are active.
- Further micro-optimizations to improve the performance of TLB
flushes"
* tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Micro-optimize smp_call_function_many_cond()
smp: Inline on_each_cpu_cond() and on_each_cpu()
x86/mm/tlb: Remove unnecessary uses of the inline keyword
cpumask: Mark functions as pure
x86/mm/tlb: Do not make is_lazy dirty for no reason
x86/mm/tlb: Privatize cpu_tlbstate
x86/mm/tlb: Flush remote and local TLBs concurrently
x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()
x86/mm/tlb: Unify flush_tlb_func_local() and flush_tlb_func_remote()
smp: Run functions concurrently in smp_call_function_many_cond()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed get_fs/set_fs
- removed broken/unmaintained MIPS KVM trap and emulate support
- added support for Loongson-2K1000
- fixes and cleanups
* tag 'mips_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits)
MIPS: BCM63XX: Use BUG_ON instead of condition followed by BUG.
MIPS: select ARCH_KEEP_MEMBLOCK unconditionally
mips: Do not include hi and lo in clobber list for R6
MIPS:DTS:Correct the license for Loongson-2K
MIPS:DTS:Fix label name and interrupt number of ohci for Loongson-2K
MIPS: Avoid handcoded DIVU in `__div64_32' altogether
lib/math/test_div64: Correct the spelling of "dividend"
lib/math/test_div64: Fix error message formatting
mips/bootinfo:correct some comments of fw_arg
MIPS: Avoid DIVU in `__div64_32' is result would be zero
MIPS: Reinstate platform `__div64_32' handler
div64: Correct inline documentation for `do_div'
lib/math: Add a `do_div' test module
MIPS: Makefile: Replace -pg with CC_FLAGS_FTRACE
MIPS: pci-legacy: revert "use generic pci_enable_resources"
MIPS: Loongson64: Add kexec/kdump support
MIPS: pci-legacy: use generic pci_enable_resources
MIPS: pci-legacy: remove busn_resource field
MIPS: pci-legacy: remove redundant info messages
MIPS: pci-legacy: stop using of_pci_range_to_resource
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- support for limited fanotify functionality for unpriviledged users
- faster merging of fanotify events
- a few smaller fsnotify improvements
* tag 'fsnotify_for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
shmem: allow reporting fanotify events with file handles on tmpfs
fs: introduce a wrapper uuid_to_fsid()
fanotify_user: use upper_32_bits() to verify mask
fanotify: support limited functionality for unprivileged users
fanotify: configurable limits via sysfs
fanotify: limit number of event merge attempts
fsnotify: use hash table for faster events merge
fanotify: mix event info and pid into merge key hash
fanotify: reduce event objectid to 29-bit hash
fsnotify: allow fsnotify_{peek,remove}_first_event with empty queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota, ext2, reiserfs updates from Jan Kara:
- support for path (instead of device) based quotactl syscall
(quotactl_path(2))
- ext2 conversion to kmap_local()
- other minor cleanups & fixes
* tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs/reiserfs/journal.c: delete useless variables
fs/ext2: Replace kmap() with kmap_local_page()
ext2: Match up ext2_put_page() with ext2_dotdot() and ext2_find_entry()
fs/ext2/: fix misspellings using codespell tool
quota: report warning limits for realtime space quotas
quota: wire up quotactl_path
quota: Add mountpath based quota support
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, target, tcmu,
smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).
The major core change is using a sbitmap instead of an atomic for
queue tracking"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
scsi: target: tcm_fc: Fix a kernel-doc header
scsi: target: Shorten ALUA error messages
scsi: target: Fix two format specifiers
scsi: target: Compare explicitly with SAM_STAT_GOOD
scsi: sd: Introduce a new local variable in sd_check_events()
scsi: dc395x: Open-code status_byte(u8) calls
scsi: 53c700: Open-code status_byte(u8) calls
scsi: smartpqi: Remove unused functions
scsi: qla4xxx: Remove an unused function
scsi: myrs: Remove unused functions
scsi: myrb: Remove unused functions
scsi: mpt3sas: Fix two kernel-doc headers
scsi: fcoe: Suppress a compiler warning
scsi: libfc: Fix a format specifier
scsi: aacraid: Remove an unused function
scsi: core: Introduce enum scsi_disposition
scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
scsi: core: Rename scsi_softirq_done() into scsi_complete()
scsi: core: Remove an incorrect comment
scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
...
|
|
Pull VFIO updates from Alex Williamson:
- Embed struct vfio_device into vfio driver structures (Jason
Gunthorpe)
- Make vfio_mdev type safe (Jason Gunthorpe)
- Remove vfio-pci NVLink2 extensions for POWER9 (Christoph Hellwig)
- Update vfio-pci IGD extensions for OpRegion 2.1+ (Fred Gao)
- Various spelling/blank line fixes (Zhen Lei, Zhou Wang, Bhaskar
Chowdhury)
- Simplify unpin_pages error handling (Shenming Lu)
- Fix i915 mdev Kconfig dependency (Arnd Bergmann)
- Remove unused structure member (Keqian Zhu)
* tag 'vfio-v5.13-rc1' of git://github.com/awilliam/linux-vfio: (43 commits)
vfio/gvt: fix DRM_I915_GVT dependency on VFIO_MDEV
vfio/iommu_type1: Remove unused pinned_page_dirty_scope in vfio_iommu
vfio/mdev: Correct the function signatures for the mdev_type_attributes
vfio/mdev: Remove kobj from mdev_parent_ops->create()
vfio/gvt: Use mdev_get_type_group_id()
vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV
vfio/mbochs: Use mdev_get_type_group_id()
vfio/mdpy: Use mdev_get_type_group_id()
vfio/mtty: Use mdev_get_type_group_id()
vfio/mdev: Add mdev/mtype_get_type_group_id()
vfio/mdev: Remove duplicate storage of parent in mdev_device
vfio/mdev: Add missing error handling to dev_set_name()
vfio/mdev: Reorganize mdev_device_create()
vfio/mdev: Add missing reference counting to mdev_type
vfio/mdev: Expose mdev_get/put_parent to mdev_private.h
vfio/mdev: Use struct mdev_type in struct mdev_device
vfio/mdev: Simplify driver registration
vfio/mdev: Add missing typesafety around mdev_device
vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer
vfio/mdev: Fix missing static's on MDEV_TYPE_ATTR's
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Here's a collection of largely clk driver updates. The usual suspects
are here: i.MX, Qualcomm, Renesas, Allwinner, Samsung, and Rockchip,
but it feels pretty light on commits.
There's only one real commit to the framework core and that's to
consolidate code. Otherwise the diffstat is dominated by many Qualcomm
clk driver patches that modernize the driver for the proper way of
speciying clk parents. That's shifting data around, which could subtly
break things so I'll be on the lookout for fixes.
New Drivers:
- Proper clk driver for Mediatek MT7621 SoCs
- Support for the clock controller on the new Rockchip rk3568
Updates:
- Simplify Zynq Kconfig dependencies
- Use clk_hw pointers in socfpga driver
- Cleanup parent data in qcom clk drivers
- Some cleanups for rk3399 modularization
- Fix reparenting of i.MX UART clocks by initializing only the ones
associated to stdout
- Correct the PCIE clocks for i.MX8MP and i.MX8MQ
- Make i.MX LPCG and SCU clocks return on registering failure
- Kernel doc fixes
- Add DAB hardware accelerator clocks on Renesas R-Car E3 and M3-N
- Add timer (TMU) clocks on Renesas R-Car H3 ES1.0
- Add Timer (TMU & CMT) and thermal sensor (TSC) clocks on
Renesas R-Car V3U
- Sigma-delta modulation on Allwinner V3s audio PLL"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (82 commits)
MAINTAINERS: add MT7621 CLOCK maintainer
staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk'
staging: mt7621-dts: make use of new 'mt7621-clk'
clk: ralink: add clock driver for mt7621 SoC
clk: uniphier: Fix potential infinite loop
clk: qcom: rpmh: add support for SDX55 rpmh IPA clock
clk: qcom: gcc-sdm845: get rid of the test clock
clk: qcom: convert SDM845 Global Clock Controller to parent_data
dt-bindings: clock: separate SDM845 GCC clock bindings
clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
dt: bindings: add mt7621-sysc device tree binding documentation
dt-bindings: clock: add dt binding header for mt7621 clocks
clk: samsung: Remove redundant dev_err calls
clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
clk: zynqmp: Drop dependency on ARCH_ZYNQMP
clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected
clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
New Drivers:
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
New Device Support:
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
Removed Device Support:
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
New Functionality:
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
New/converted Device Tree bindings:
- rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
atc260x, ricoh rn5t618, qcom pm8xxx
- Fix-ups:
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio
Bug Fixes:
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers"
* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
mfd: twl: Remove unused inline function twl4030charger_usb_en()
dt-bindings: mfd: Convert pm8xxx bindings to yaml
dt-bindings: mfd: Add compatible for pmk8350 rtc
i2c: designware: Get rid of legacy platform data
mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
mfd: arizona: Fix rumtime PM imbalance on error
mfd: max8997: Replace 8998 with 8997
mfd: core: Use acpi_find_child_device() for child devices lookup
mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
mfd: intel_quark_i2c_gpio: Enable MSI interrupt
mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
mfd: ntxec: Support for EC in Tolino Shine 2 HD
mfd: stm32-timers: Avoid clearing auto reload register
mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
mfd: intel_quark_i2c_gpio: Remove unused struct device member
mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
...
|
|
Pull MMC and MEMSTICK updates from Ulf Hansson:
"MMC core:
- Fix hanging on I/O during system suspend for removable cards
- Set read only for SD cards with permanent write protect bit
- Power cycle the SD/SDIO card if CMD11 fails for UHS voltage
- Issue a cache flush for eMMC only when it's enabled
- Adopt to updated cache ctrl settings for eMMC from MMC ioctls
- Use use device property API when parsing voltages
- Don't retry eMMC sanitize cmds
- Use the timeout from the MMC ioctl for eMMC santize cmds
MMC host:
- mmc_spi: Make of_mmc_spi.c resource provider agnostic
- mmc_spi: Use polling for card detect even without voltage-ranges
- sdhci: Check for reset prior to DMA address unmap
- sdhci-acpi: Add support for the AMDI0041 eMMC controller variant
- sdhci-esdhc-imx: Depending on OF Kconfig and cleanup code
- sdhci-pci: Add PCI IDs for Intel LKF
- sdhci-pci: Fix initialization of some SD cards for Intel BYT
- sdhci-pci-gli: Various improvements for GL97xx variants
- sdhci-of-dwcmshc: Enable support for MMC_CAP_WAIT_WHILE_BUSY
- sdhci-of-dwcmshc: Add ACPI support for BlueField-3 SoC
- sdhci-of-dwcmshc: Add Rockchip platform support
- tmio/renesas_sdhi: Extend support for reset and use a reset controller
- tmio/renesas_sdhi: Enable support for MMC_CAP_WAIT_WHILE_BUSY
- tmio/renesas_sdhi: Various improvements
MEMSTICK:
- Minor improvements/cleanups"
* tag 'mmc-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (79 commits)
mmc: block: Issue a cache flush only when it's enabled
memstick: r592: ignore kfifo_out() return code again
mmc: block: Update ext_csd.cache_ctrl if it was written
mmc: mmc_spi: Make of_mmc_spi.c resource provider agnostic
mmc: mmc_spi: Use already parsed IRQ
mmc: mmc_spi: Drop unused NO_IRQ definition
mmc: mmc_spi: Set up polling even if voltage-ranges is not present
mmc: core: Convert mmc_of_parse_voltage() to use device property API
mmc: core: Correct descriptions in mmc_of_parse()
mmc: dw_mmc-rockchip: Just set default sample value for legacy mode
mmc: sdhci-s3c: constify uses of driver/match data
mmc: sdhci-s3c: correct kerneldoc of sdhci_s3c_drv_data
mmc: sdhci-s3c: simplify getting of_device_id match data
mmc: tmio: always restore irq register
mmc: sdhci-pci-gli: Enlarge ASPM L1 entry delay of GL975x
mmc: core: Let eMMC sanitize not retry in case of timeout/failure
mmc: core: Add a retries parameter to __mmc_switch function
memstick: r592: remove unused variable
mmc: sdhci-st: Remove unnecessary error log
mmc: sdhci-msm: Remove unnecessary error log
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refactor powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
* tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
powerpc: If kexec_build_elf_info() fails return immediately from elf64_load()
powerpc: Free fdt on error in elf64_load()
of: overlay: Fix kerneldoc warning in of_overlay_remove()
of: linux/of.h: fix kernel-doc warnings
of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses
dt-bindings: bcm4329-fmac: add optional brcm,ccode-map
docs: dt: update writing-schema.rst references
dt-bindings: media: venus: Add sm8250 dt schema
of: base: Fix spelling issue with function param 'prop'
docs: dt: Add DT API documentation
of: Add missing 'Return' section in kerneldoc comments
of: Fix kerneldoc output formatting
docs: dt: Group DT docs into relevant sub-sections
docs: dt: Make 'Devicetree' wording more consistent
docs: dt: writing-schema: Include the example schema in the doc build
docs: dt: writing-schema: Remove spurious indentation
dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc
dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3
dt-bindings: media: video-interfaces: Drop the example
devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"battery/charger driver changes:
- core:
- provide function stubs if CONFIG_POWER_SUPPLY=n
- reduce loglevel for probe defer info
- surface:
- new battery and charger drivers for Surface
- bq27xxx:
- add bq78z100 support
- fix current_now/power_avg for newer chips
- cw2015:
- add CHARGE_NOW support
- ab8500:
- drop pdata support
- convert most DT bindings to YAML
- lots of minor fixes and cleanups
reset drivers:
- ltc2952-poweroff:
- make trigger delay configurable from DT
- minor fixes and cleanups"
* tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (97 commits)
power: supply: cpcap-battery: fix invalid usage of list cursor
power: supply: bq256xx: add kerneldoc for structure members
power: supply: act8945a: correct kerneldoc
power: supply: max17040: remove unneeded double cast
power: supply: max17040: handle device_property_read_u8_array() failure
power: supply: max14577: remove unneeded variable initialization
power: supply: surface-charger: Make symbol 'surface_ac_pm_ops' static
power: supply: surface-battery: Make some symbols static
power: reset: restart-poweroff: Add missing MODULE_DEVICE_TABLE
power: reset: hisi-reboot: add missing MODULE_DEVICE_TABLE
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
power: supply: Add AC driver for Surface Aggregator Module
power: supply: Add battery driver for Surface Aggregator Module
power: supply: bq25980: Move props from battery node
power: supply: core: Use true and false for bool variable
power: supply: goldfish: Remove the GOLDFISH dependency
power: reset: ltc2952: make trigger delay configurable
power: supply: cpcap-charger: Simplify bool conversion
power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
...
|
|
Pull io_uring updates from Jens Axboe:
- Support for multi-shot mode for POLL requests
- More efficient reference counting. This is shamelessly stolen from
the mm side. Even though referencing is mostly single/dual user, the
128 count was retained to keep the code the same. Maybe this
should/could be made generic at some point.
- Removal of the need to have a manager thread for each ring. The
manager threads only job was checking and creating new io-threads as
needed, instead we handle this from the queue path.
- Allow SQPOLL without CAP_SYS_ADMIN or CAP_SYS_NICE. Since 5.12, this
thread is "just" a regular application thread, so no need to restrict
use of it anymore.
- Cleanup of how internal async poll data lifetime is managed.
- Fix for syzbot reported crash on SQPOLL cancelation.
- Make buffer registration more like file registrations, which includes
flexibility in avoiding full set unregistration and re-registration.
- Fix for io-wq affinity setting.
- Be a bit more defensive in task->pf_io_worker setup.
- Various SQPOLL fixes.
- Cleanup of SQPOLL creds handling.
- Improvements to in-flight request tracking.
- File registration cleanups.
- Tons of cleanups and little fixes
* tag 'for-5.13/io_uring-2021-04-27' of git://git.kernel.dk/linux-block: (156 commits)
io_uring: maintain drain logic for multishot poll requests
io_uring: Check current->io_uring in io_uring_cancel_sqpoll
io_uring: fix NULL reg-buffer
io_uring: simplify SQPOLL cancellations
io_uring: fix work_exit sqpoll cancellations
io_uring: Fix uninitialized variable up.resv
io_uring: fix invalid error check after malloc
io_uring: io_sq_thread() no longer needs to reset current->pf_io_worker
kernel: always initialize task->pf_io_worker to NULL
io_uring: update sq_thread_idle after ctx deleted
io_uring: add full-fledged dynamic buffers support
io_uring: implement fixed buffers registration similar to fixed files
io_uring: prepare fixed rw for dynanic buffers
io_uring: keep table of pointers to ubufs
io_uring: add generic rsrc update with tags
io_uring: add IORING_REGISTER_RSRC
io_uring: enumerate dynamic resources
io_uring: add generic path for rsrc update
io_uring: preparation for rsrc tagging
io_uring: decouple CQE filling from requests
...
|
|
Pull block driver updates from Jens Axboe:
- MD changes via Song:
- raid5 POWER fix
- raid1 failure fix
- UAF fix for md cluster
- mddev_find_or_alloc() clean up
- Fix NULL pointer deref with external bitmap
- Performance improvement for raid10 discard requests
- Fix missing information of /proc/mdstat
- rsxx const qualifier removal (Arnd)
- Expose allocated brd pages (Calvin)
- rnbd via Gioh Kim:
- Change maintainer
- Change domain address of maintainers' email
- Add polling IO mode and document update
- Fix memory leak and some bug detected by static code analysis
tools
- Code refactoring
- Series of floppy cleanups/fixes (Denis)
- s390 dasd fixes (Julian)
- kerneldoc fixes (Lee)
- null_blk double free (Lv)
- null_blk virtual boundary addition (Max)
- Remove xsysace driver (Michal)
- umem driver removal (Davidlohr)
- ataflop fixes (Dan)
- Revalidate disk removal (Christoph)
- Bounce buffer cleanups (Christoph)
- Mark lightnvm as deprecated (Christoph)
- mtip32xx init cleanups (Shixin)
- Various fixes (Tian, Gustavo, Coly, Yang, Zhang, Zhiqiang)
* tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block: (143 commits)
async_xor: increase src_offs when dropping destination page
drivers/block/null_blk/main: Fix a double free in null_init.
md/raid1: properly indicate failure when ending a failed write request
md-cluster: fix use-after-free issue when removing rdev
nvme: introduce generic per-namespace chardev
nvme: cleanup nvme_configure_apst
nvme: do not try to reconfigure APST when the controller is not live
nvme: add 'kato' sysfs attribute
nvme: sanitize KATO setting
nvmet: avoid queuing keep-alive timer if it is disabled
brd: expose number of allocated pages in debugfs
ataflop: fix off by one in ataflop_probe()
ataflop: potential out of bounds in do_format()
drbd: Fix fall-through warnings for Clang
block/rnbd: Use strscpy instead of strlcpy
block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
block/rnbd-clt: Remove max_segment_size
block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes
block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_ev
Documentation/ABI/rnbd-clt: Add description for nr_poll_queues
...
|
|
Pull block updates from Jens Axboe:
"Pretty quiet round this time, which is nice. In detail:
- Series revamping bounce buffer support (Christoph)
- Dead code removal (Christoph, Bart)
- Partition iteration revamp, now using xarray (Christoph)
- Passthrough request scheduler improvements (Lin)
- Series of BFQ improvements (Paolo)
- Fix ioprio task iteration (Peter)
- Various little tweaks and fixes (Tejun, Saravanan, Bhaskar, Max,
Nikolay)"
* tag 'for-5.13/block-2021-04-27' of git://git.kernel.dk/linux-block: (41 commits)
blk-iocost: don't ignore vrate_min on QD contention
blk-mq: Fix spurious debugfs directory creation during initialization
bfq/mq-deadline: remove redundant check for passthrough request
blk-mq: bypass IO scheduler's limit_depth for passthrough request
block: Remove an obsolete comment from sg_io()
block: move bio_list_copy_data to pktcdvd
block: remove zero_fill_bio_iter
block: add queue_to_disk() to get gendisk from request_queue
block: remove an incorrect check from blk_rq_append_bio
block: initialize ret in bdev_disk_changed
block: Fix sys_ioprio_set(.which=IOPRIO_WHO_PGRP) task iteration
block: remove disk_part_iter
block: simplify diskstats_show
block: simplify show_partition
block: simplify printk_all_partitions
block: simplify partition_overlaps
block: simplify partition removal
block: take bd_mutex around delete_partitions in del_gendisk
block: refactor blk_drop_partitions
block: move more syncing and invalidation to delete_partition
...
|
|
In case ethernet driver is enabled and INET is disabled, selftest will
fail to build.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 3e1e58d64c3d ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210428130947.29649-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current definitions of constants for PROBE, currently defined only
in the net-next kernel branch, are inconsistent, with
some beginning with ICMP and others with simply EXT. This patch
attempts to standardize the naming conventions of the constants for
PROBE before their release into a stable Kernel, and to update the
relevant definitions in net/ipv4/icmp.c.
Similarly, the definitions for the code field (previously
ICMP_EXT_MAL_QUERY, etc) use the same prefixes as the type field. This
patch adds _CODE_ to the prefix to clarify the distinction of these
constants.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210427153635.2591-1-andreas.a.roeseler@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and
debugfs interfaces to a unified debugfs interface.
- Signals: Allow caching one sigqueue object per task, to improve
performance & latencies.
- Improve newidle_balance() irq-off latencies on systems with a large
number of CPU cgroups.
- Improve energy-aware scheduling
- Improve the PELT metrics for certain workloads
- Reintroduce select_idle_smt() to improve load-balancing locality -
but without the previous regressions
- Add 'scheduler latency debugging': warn after long periods of pending
need_resched. This is an opt-in feature that requires the enabling of
the LATENCY_WARN scheduler feature, or the use of the
resched_latency_warn_ms=xx boot parameter.
- CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix
remaining balance_push() vs. hotplug holes/races
- PSI fixes, plus allow /proc/pressure/ files to be written by
CAP_SYS_RESOURCE tasks as well
- Fix/improve various load-balancing corner cases vs. capacity margins
- Fix sched topology on systems with NUMA diameter of 3 or above
- Fix PF_KTHREAD vs to_kthread() race
- Minor rseq optimizations
- Misc cleanups, optimizations, fixes and smaller updates
* tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
cpumask/hotplug: Fix cpu_dying() state tracking
kthread: Fix PF_KTHREAD vs to_kthread() race
sched/debug: Fix cgroup_path[] serialization
sched,psi: Handle potential task count underflow bugs more gracefully
sched: Warn on long periods of pending need_resched
sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning
sched/debug: Rename the sched_debug parameter to sched_verbose
sched,fair: Alternative sched_slice()
sched: Move /proc/sched_debug to debugfs
sched,debug: Convert sysctl sched_domains to debugfs
debugfs: Implement debugfs_create_str()
sched,preempt: Move preempt_dynamic to debug.c
sched: Move SCHED_DEBUG sysctl to debugfs
sched: Don't make LATENCYTOP select SCHED_DEBUG
sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG
sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG
sched: Use cpu_dying() to fix balance_push vs hotplug-rollback
cpumask: Introduce DYING mask
cpumask: Make cpu_{online,possible,present,active}() inline
rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability
enumeration method introduced on the latest Intel platforms. This
table is in a well-defined PCI namespace location and is read via
MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter
blocks, but fancier counters still need to be enumerated
explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of
'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big')
and Gracemont ('small' - Atom derived) cores.
The CPU-side feature set is entirely symmetrical - but on the PMU
side there's core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX
profiling, by fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The
immediate motivation is to support low-overhead sampling-based race
detection for user-space code. The feature consists of the following
main changes:
- Add thread-only event inheritance via
perf_event_attr::inherit_thread, which limits inheritance of
events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via
perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap,
extend siginfo with an u64 ::si_perf, and add the breakpoint
information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the
new field can be used to introduce support for other types of
metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
* tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
signal, perf: Add missing TRAP_PERF case in siginfo_layout()
signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
perf/x86: Allow for 8<num_fixed_counters<16
perf/x86/rapl: Add support for Intel Alder Lake
perf/x86/cstate: Add Alder Lake CPU support
perf/x86/msr: Add Alder Lake CPU support
perf/x86/intel/uncore: Add Alder Lake support
perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
perf/x86/intel: Add Alder Lake Hybrid support
perf/x86: Support filter_match callback
perf/x86/intel: Add attr_update for Hybrid PMUs
perf/x86: Add structures for the attributes of Hybrid PMUs
perf/x86: Register hybrid PMUs
perf/x86: Factor out x86_pmu_show_pmu_cap
perf/x86: Remove temporary pmu assignment in event_init
perf/x86/intel: Factor out intel_pmu_check_extra_regs
perf/x86/intel: Factor out intel_pmu_check_event_constraints
perf/x86/intel: Factor out intel_pmu_check_num_counters
perf/x86: Hybrid PMU support for extra_regs
perf/x86: Hybrid PMU support for event constraints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rtmutex cleanup & spring cleaning pass that removes ~400 lines of
code
- Futex simplifications & cleanups
- Add debugging to the CSD code, to help track down a tenacious race
(or hw problem)
- Add lockdep_assert_not_held(), to allow code to require a lock to not
be held, and propagate this into the ath10k driver
- Misc LKMM documentation updates
- Misc KCSAN updates: cleanups & documentation updates
- Misc fixes and cleanups
- Fix locktorture bugs with ww_mutexes
* tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
kcsan: Fix printk format string
static_call: Relax static_call_update() function argument type
static_call: Fix unused variable warn w/o MODULE
locking/rtmutex: Clean up signal handling in __rt_mutex_slowlock()
locking/rtmutex: Restrict the trylock WARN_ON() to debug
locking/rtmutex: Fix misleading comment in rt_mutex_postunlock()
locking/rtmutex: Consolidate the fast/slowpath invocation
locking/rtmutex: Make text section and inlining consistent
locking/rtmutex: Move debug functions as inlines into common header
locking/rtmutex: Decrapify __rt_mutex_init()
locking/rtmutex: Remove pointless CONFIG_RT_MUTEXES=n stubs
locking/rtmutex: Inline chainwalk depth check
locking/rtmutex: Move rt_mutex_debug_task_free() to rtmutex.c
locking/rtmutex: Remove empty and unused debug stubs
locking/rtmutex: Consolidate rt_mutex_init()
locking/rtmutex: Remove output from deadlock detector
locking/rtmutex: Remove rtmutex deadlock tester leftovers
locking/rtmutex: Remove rt_mutex_timed_lock()
MAINTAINERS: Add myself as futex reviewer
locking/mutex: Remove repeated declaration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- Support for "N" as alias for last bit in bitmap parsing library (eg
using syntax like "nohz_full=2-N")
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by
Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
* tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
rcu: Provide polling interfaces for Tiny RCU grace periods
torture: Fix kvm.sh --datestamp regex check
torture: Consolidate qemu-cmd duration editing into kvm-transform.sh
torture: Print proper vmlinux path for kvm-again.sh runs
torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment
torture: Make kvm-transform.sh update jitter commands
torture: Add --duration argument to kvm-again.sh
torture: Add kvm-again.sh to rerun a previous torture-test
torture: Create a "batches" file for build reuse
torture: De-capitalize TORTURE_SUITE
torture: Make upper-case-only no-dot no-slash scenario names official
torture: Rename SRCU-t and SRCU-u to avoid lowercase characters
torture: Remove no-mpstat error message
torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs
torture: Record jitter start/stop commands
torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh
torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd
torture: Abstract jitter.sh start/stop into scripts
rcu: Provide polling interfaces for Tree RCU grace periods
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-04-28
The main changes are:
1) Add link detach and following re-attach for trampolines, from Jiri Olsa.
2) Use kernel's "binary printf" lib for formatted output BPF helpers (which
avoids the needs for variadic argument handling), from Florent Revest.
3) Fix verifier 64 to 32 bit min/max bound propagation, from Daniel Borkmann.
4) Convert cpumap to use netif_receive_skb_list(), from Lorenzo Bianconi.
5) Add generic batched-ops support to percpu array map, from Pedro Tammela.
6) Various CO-RE relocation BPF selftests fixes, from Andrii Nakryiko.
7) Misc doc rst fixes, from Hengqi Chen.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
bpf, docs: Fix literal block for example code
bpf, cpumap: Bulk skb using netif_receive_skb_list
bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds
bpf: Lock bpf_trace_printk's tmp buf before it is written to
selftests/bpf: Fix core_reloc test runner
selftests/bpf: Fix field existence CO-RE reloc tests
selftests/bpf: Fix BPF_CORE_READ_BITFIELD() macro
libbpf: Support BTF_KIND_FLOAT during type compatibility checks in CO-RE
selftests/bpf: Add remaining ASSERT_xxx() variants
selftests/bpf: Use ASSERT macros in lsm test
selftests/bpf: Test that module can't be unloaded with attached trampoline
selftests/bpf: Add re-attach test to lsm test
selftests/bpf: Add re-attach test to fexit_test
selftests/bpf: Add re-attach test to fentry_test
bpf: Allow trampoline re-attach for tracing and lsm programs
====================
Link: https://lore.kernel.org/r/20210427233740.22238-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"The usual lots of work all over the place.
i915 has gotten some Alderlake work and prelim DG1 code, along with a
major locking rework over the GEM code, and brings back the property
of timing out long running jobs using a watchdog. amdgpu has some
Alderbran support (new GPU), freesync HDMI support along with a lot
other fixes.
Outside of the drm, there is a new printf specifier added which should
have all the correct acks/sobs:
- printk fourcc modifier support added %p4cc
Summary:
core:
- drm_crtc_commit_wait
- atomic plane state helpers reworked for full state
- dma-buf heaps API rework
- edid: rework and improvements for displayid
dp-mst:
- better topology logging
bridge:
- Chipone ICN6211
- Lontium LT8912B
- anx7625 regulator support
panel:
- fix lt9611 4k panels handling
simple-kms:
- add plane state helpers
ttm:
- debugfs support
- removal of unused sysfs
- ignore signaled moved fences
- ioremap buffer according to mem caching
i915:
- Alderlake S enablement
- Conversion to dma_resv_locking
- Bring back watchdog timeout support
- legacy ioctl cleanups
- add GEM TDDO and RFC process
- DG1 LMEM preparation work
- intel_display.c refactoring
- Gen9/TGL PCH combination support
- eDP MSO Support
- multiple PSR instance support
- Link training debug updates
- Disable PSR2 support on JSL/EHL
- DDR5/LPDDR5 support for bw calcs
- LSPCON limited to gen9/10 platforms
- HSW/BDW async flip/VTd corruption workaround
- SAGV watermark fixes
- SNB hard hang on ring resume fix
- Limit imported dma-buf size
- move to use new tasklet API
- refactor KBL/TGL/ADL-S display/gt steppings
- refactoring legacy DP/HDMI, FB plane code out
amdgpu:
- uapi: add ioctl to query video capabilities
- Iniital AMD Freesync HDMI support
- Initial Adebaran support
- 10bpc dithering improvements
- DCN secure display support
- Drop legacy IO BAR requirements
- PCIE/S0ix/RAS/Prime/Reset fixes
- Display ASSR support
- SMU gfx busy queues for RV/PCO
- Initial LTTPR display work
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- debugfs cleanps
- fw error handling ifix
- Flexible array cleanups
msm:
- big DSI phy/pll cleanup
- sc7280 initial support
- commong bandwidth scaling path
- shrinker locking contention fixes
- unpin/swap support for GEM objcets
ast:
- cursor plane handling reworked
tegra:
- don't register DP AUX channels before connectors
zynqmp:
- fix OOB struct padding memset
gma500:
- drop ttm and medfield support
exynos:
- request_irq cleanup function
mediatek:
- fine tune line time for EOTp
- MT8192 dpi support
- atomic crtc config updates
- don't support HDMI connector creation
mxsdb:
- imx8mm support
panfrost:
- MMU IRQ handling rework
qxl:
- locking fixes
- resource deallocation changes
sun4i:
- add alpha properties to UI/VI layers
vc4:
- RPi4 CEC support
vmwgfx:
- doc cleanups
arc:
- moved to drm/tiny"
* tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits)
drm/ttm: Don't count pages in SG BOs against pages_limit
drm/ttm: fix return value check
drm/bridge: lt8912b: fix incorrect handling of of_* return values
drm: bridge: fix LONTIUM use of mipi_dsi_() functions
drm: bridge: fix ANX7625 use of mipi_dsi_() functions
drm/amdgpu: page retire over debugfs mechanism
drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
drm/amd/display: Fix the Wunused-function warning
drm/radeon/r600: Fix variables that are not used after assignment
drm/amdgpu/smu7: fix CAC setting on TOPAZ
drm/amd/display: Update DCN302 SR Exit Latency
drm/amdgpu: enable ras eeprom on aldebaran
drm/amdgpu: RAS harvest on driver load
drm/amdgpu: add ras aldebaran ras eeprom driver
drm/amd/pm: increase time out value when sending msg to SMU
drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag
drm/amd/pm: add the callback to get vbios bootup values for vangogh
drm/radeon: Fix size overflow
drm/amdgpu: Fix size overflow
drm/amdgpu: move mmhub ras_func init to ip specific file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- addition of a maintainer's profile for the media subsystem
- addition of i.MX8 IP support
- qcom/camss gained support for hardware version Titan 170
- new RC keymaps
- Lots of other improvements, cleanups and bug fixes
* tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (488 commits)
media: coda: fix macroblocks count control usage
media: rkisp1: params: fix wrong bits settings
media: cedrus: Fix H265 status definitions
media: meson-ge2d: fix rotation parameters
media: v4l2-ctrls: fix reference to freed memory
media: venus : hfi: add venus image info into smem
media: venus: Fix internal buffer size calculations for v6.
media: venus: helpers: keep max bandwidth when mbps exceeds the supported range
media: venus: fix hw overload error log condition
media: venus: core: correct firmware name for sm8250
media: venus: core,pm: fix potential infinite loop
media: venus: core: Fix kerneldoc warnings
media: gscpa/stv06xx: fix memory leak
media: cx25821: remove unused including <linux/version.h>
media: staging: media/meson: remove redundant dev_err call
media: adv7842: support 1 block EDIDs, fix clearing EDID
media: adv7842: configure all pads
media: allegro: change kernel-doc comment blocks to normal comments
media: camss: ispif: Remove redundant dev_err call in msm_ispif_subdev_init()
media: i2c: rdamc21: Fix warning on u8 cast
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes and a new feature to support failure from dynamic
analysis tools such as UBSAN and fake ops for testing.
- a fake ops struct for testing a "free" function to complain if it
was called with an invalid argument, or caught a double-free. Most
return void and have no normal means of signalling failure (e.g.
super_operations, iommu_ops, etc.)"
* tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: add tips for using current->kunit_test
kunit: fix -Wunused-function warning for __kunit_fail_current_test
kunit: support failure from dynamic analysis tools
kunit: tool: make --kunitconfig accept dirs, add lib/kunit fragment
kunit: make KUNIT_EXPECT_STREQ() quote values, don't print literals
kunit: Match parenthesis alignment to improve code readability
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
"The only notable change is Vipin's new misc cgroup controller.
This implements generic support for resources which can be controlled
by simply counting and limiting the number of resource instances - ie
there's X number of these on the system and this cgroup subtree can
have upto Y of those.
The first user is the address space IDs used for virtual machine
memory encryption and expected future usages are similar - niche
hardware features with concrete resource limits and simple usage
models"
* 'for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: use tsk->in_iowait instead of delayacct_is_task_waiting_on_io()
cgroup/cpuset: fix typos in comments
cgroup: misc: mark dummy misc_cg_res_total_usage() static inline
svm/sev: Register SEV and SEV-ES ASIDs to the misc controller
cgroup: Miscellaneous cgroup documentation.
cgroup: Add misc cgroup controller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Stop synchronizing kernel log buffer readers by logbuf_lock. As a
result, the access to the buffer is fully lockless now.
Note that printk() itself still uses locks because it tries to flush
the messages to the console immediately. Also the per-CPU temporary
buffers are still there because they prevent infinite recursion and
serialize backtraces from NMI. All this is going to change in the
future.
- kmsg_dump API rework and cleanup as a side effect of the logbuf_lock
removal.
- Make bstr_printf() aware that %pf and %pF formats could deference the
given pointer.
- Show also page flags by %pGp format.
- Clarify the documentation for plain pointer printing.
- Do not show no_hash_pointers warning multiple times.
- Update Senozhatsky email address.
- Some clean up.
* tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (24 commits)
lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf()
printk: clarify the documentation for plain pointer printing
kernel/printk.c: Fixed mundane typos
printk: rename vprintk_func to vprintk
vsprintf: dump full information of page flags in pGp
mm, slub: don't combine pr_err with INFO
mm, slub: use pGp to print page flags
MAINTAINERS: update Senozhatsky email address
lib/vsprintf: do not show no_hash_pointers message multiple times
printk: console: remove unnecessary safe buffer usage
printk: kmsg_dump: remove _nolock() variants
printk: remove logbuf_lock
printk: introduce a kmsg_dump iterator
printk: kmsg_dumper: remove @active field
printk: add syslog_lock
printk: use atomic64_t for devkmsg_user.seq
printk: use seqcount_latch for clear_seq
printk: introduce CONSOLE_LOG_MAX
printk: consolidate kmsg_dump_get_buffer/syslog_print_all code
printk: refactor kmsg_dump_get_buffer()
...
|
|
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".
Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).
This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.
At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.
[ It was a mistake to upgrade one of my machines to Fedora 34 while
being busy with the merge window, but if this is the extent of the
compiler upgrade problems, things are better than usual - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- Proper clk driver for Mediatek MT7621 SoCs
* clk-ralink:
MAINTAINERS: add MT7621 CLOCK maintainer
staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk'
staging: mt7621-dts: make use of new 'mt7621-clk'
clk: ralink: add clock driver for mt7621 SoC
dt: bindings: add mt7621-sysc device tree binding documentation
dt-bindings: clock: add dt binding header for mt7621 clocks
|
|
'clk-uniphier' into clk-next
- Simplify Zynq Kconfig dependencies
* clk-imx:
clk: imx: Reference preceded by free
clk: imx8mq: Correct the pcie1 sels
clk: imx8mp: Remove the none exist pcie clocks
clk: imx: Fix reparenting of UARTs not associated with stdout
* clk-samsung:
clk: samsung: Remove redundant dev_err calls
clk: exynos7: Mark aclk_fsys1_200 as critical
* clk-zynq:
clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
clk: zynqmp: Drop dependency on ARCH_ZYNQMP
clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected
* clk-rockchip:
clk: rockchip: drop MODULE_ALIAS from rk3399 clock controller
clk: rockchip: drop parenthesis from ARM || COMPILE_TEST depends
clk: rockchip: add clock controller for rk3568
clk: rockchip: support more core div setting
dt-binding: clock: Document rockchip, rk3568-cru bindings
clk: rockchip: add dt-binding header for rk3568
* clk-uniphier:
clk: uniphier: Fix potential infinite loop
|
|
BPF has three formatted output helpers: bpf_trace_printk, bpf_seq_printf
and bpf_snprintf. Their signatures specify that all arguments are
provided from the BPF world as u64s (in an array or as registers). All
of these helpers are currently implemented by calling functions such as
snprintf() whose signatures take a variable number of arguments, then
placed in a va_list by the compiler to call vsnprintf().
"d9c9e4db bpf: Factorize bpf_trace_printk and bpf_seq_printf" introduced
a bpf_printf_prepare function that fills an array of u64 sanitized
arguments with an array of "modifiers" which indicate what the "real"
size of each argument should be (given by the format specifier). The
BPF_CAST_FMT_ARG macro consumes these arrays and casts each argument to
its real size. However, the C promotion rules implicitely cast them all
back to u64s. Therefore, the arguments given to snprintf are u64s and
the va_list constructed by the compiler will use 64 bits for each
argument. On 64 bit machines, this happens to work well because 32 bit
arguments in va_lists need to occupy 64 bits anyway, but on 32 bit
architectures this breaks the layout of the va_list expected by the
called function and mangles values.
In "88a5c690b6 bpf: fix bpf_trace_printk on 32 bit archs", this problem
had been solved for bpf_trace_printk only with a "horrid workaround"
that emitted multiple calls to trace_printk where each call had
different argument types and generated different va_list layouts. One of
the call would be dynamically chosen at runtime. This was ok with the 3
arguments that bpf_trace_printk takes but bpf_seq_printf and
bpf_snprintf accept up to 12 arguments. Because this approach scales
code exponentially, it is not a viable option anymore.
Because the promotion rules are part of the language and because the
construction of a va_list is an arch-specific ABI, it's best to just
avoid variadic arguments and va_lists altogether. Thankfully the
kernel's snprintf() has an alternative in the form of bstr_printf() that
accepts arguments in a "binary buffer representation". These binary
buffers are currently created by vbin_printf and used in the tracing
subsystem to split the cost of printing into two parts: a fast one that
only dereferences and remembers values, and a slower one, called later,
that does the pretty-printing.
This patch refactors bpf_printf_prepare to construct binary buffers of
arguments consumable by bstr_printf() instead of arrays of arguments and
modifiers. This gets rid of BPF_CAST_FMT_ARG and greatly simplifies the
bpf_printf_prepare usage but there are a few gotchas that change how
bpf_printf_prepare needs to do things.
Currently, bpf_printf_prepare uses a per cpu temporary buffer as a
generic storage for strings and IP addresses. With this refactoring, the
temporary buffers now holds all the arguments in a structured binary
format.
To comply with the format expected by bstr_printf, certain format
specifiers also need to be pre-formatted: %pB and %pi6/%pi4/%pI4/%pI6.
Because vsnprintf subroutines for these specifiers are hard to expose,
we pre-format these arguments with calls to snprintf().
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210427174313.860948-3-revest@chromium.org
|
|
Similarly to seq_buf_bprintf in lib/seq_buf.c, this function writes a
printf formatted string with arguments provided in a "binary
representation" built by functions such as vbin_printf.
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210427174313.860948-2-revest@chromium.org
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add support for the catch-all set element. This special element
can be used to define a default action to be applied in case that
the set lookup returns no matching element.
2) Fix incorrect #ifdef dependencies in the nftables cgroupsv2
support, from Arnd Bergmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SMI0 is a mangled version of MDIO. The main low level difference is
the MDIO C22 OP code is always 0, not 0x2 or 0x1 for Read/Write. The
read/write information is instead encoded in the PHY address.
Extend the bit-bang code to allow the op code to be overridden, but
default to normal C22 values. Add an extra compatible to the mdio-gpio
driver, and when this compatible is present, set the op codes to 0.
A higher level driver, sitting on top of the basic MDIO bus driver can
then implement the rest of the microchip SMI0 odderties.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Although HWTSTAMP_TX_ONESTEP_SYNC existed in ioctl for hardware timestamp
configuration, the PTP Sync one-step timestamping had never been supported.
This patch is to truely support it.
- ocelot_port_txtstamp_request()
This function handles tx timestamp request by storing
ptp_cmd(tx timestamp type) in OCELOT_SKB_CB(skb)->ptp_cmd,
and additionally for two-step timestamp storing ts_id in
OCELOT_SKB_CB(clone)->ptp_cmd.
- ocelot_ptp_rew_op()
During xmit, this function is called to get rew_op (rewriter option) by
checking skb->cb for tx timestamp request, and configure to transmitting.
Non-onestep-Sync packet with one-step timestamp request falls back to use
two-step timestamp.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert to a common ocelot_port_txtstamp_request() for TX timestamp
request handling.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Free skb->cb usage in core driver and let device drivers decide to
use or not. The reason having a DSA_SKB_CB(skb)->clone was because
dsa_skb_tx_timestamp() which may set the clone pointer was called
before p->xmit() which would use the clone if any, and the device
driver has no way to initialize the clone pointer.
This patch just put memset(skb->cb, 0, sizeof(skb->cb)) at beginning
of dsa_slave_xmit(). Some new features in the future, like one-step
timestamp may need more bytes of skb->cb to use in
dsa_skb_tx_timestamp(), and p->xmit().
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was a waste to clone skb directly in dsa_skb_tx_timestamp().
For one-step timestamping, a clone was not needed. For any failure of
port_txtstamp (this may usually happen), the skb clone had to be freed.
So this patch moves skb cloning for tx timestamp out of dsa core, and
let drivers clone skb in port_txtstamp if they really need.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move ptp_classify_raw out of dsa core driver for handling tx
timestamp request. Let device drivers do this if they want.
Not all drivers want to limit tx timestamping for only PTP
packet.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IPv6 Multicast Router Advertisements parsing has the following two
issues:
For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD
messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes,
assuming MLDv2 Reports with at least one multicast address entry).
When ipv6_mc_check_mld_msg() tries to parse an Multicast Router
Advertisement its MLD length check will fail - and it will wrongly
return -EINVAL, even if we have a valid MRD Advertisement. With the
returned -EINVAL the bridge code will assume a broken packet and will
wrongly discard it, potentially leading to multicast packet loss towards
multicast routers.
The second issue is the MRD header parsing in
br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header
immediately after the IPv6 header (IPv6 next header type). However
according to RFC4286, section 2 all MRD messages contain a Router Alert
option (just like MLD). So instead there is an IPv6 Hop-by-Hop option
for the Router Alert between the IPv6 and ICMPv6 header, again leading
to the bridge wrongly discarding Multicast Router Advertisements.
To fix these two issues, introduce a new return value -ENODATA to
ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop
option which is not an MLD but potentially an MRD packet. This also
simplifies further parsing in the bridge code, as ipv6_mc_check_mld()
already fully checks the ICMPv6 header and hop-by-hop option.
These issues were found and fixed with the help of the mrdisc tool
(https://github.com/troglobit/mrdisc).
Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add support for measuring the SELinux state and policy capabilities
using IMA.
- A handful of SELinux/NFS patches to compare the SELinux state of one
mount with a set of mount options. Olga goes into more detail in the
patch descriptions, but this is important as it allows more
flexibility when using NFS and SELinux context mounts.
- Properly differentiate between the subjective and objective LSM
credentials; including support for the SELinux and Smack. My clumsy
attempt at a proper fix for AppArmor didn't quite pass muster so John
is working on a proper AppArmor patch, in the meantime this set of
patches shouldn't change the behavior of AppArmor in any way. This
change explains the bulk of the diffstat beyond security/.
- Fix a problem where we were not properly terminating the permission
list for two SELinux object classes.
* tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: add proper NULL termination to the secclass_map permissions
smack: differentiate between subjective and objective task credentials
selinux: clarify task subjective and objective credentials
lsm: separate security_task_getsecid() into subjective and objective variants
nfs: account for selinux security context when deciding to share superblock
nfs: remove unneeded null check in nfs_fill_super()
lsm,selinux: add new hook to compare new mount to an existing mount
selinux: fix misspellings using codespell tool
selinux: fix misspellings using codespell tool
selinux: measure state and policy capabilities
selinux: Allow context mounts for unpriviliged overlayfs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"Use the new netfs lib.
Begin the process of overhauling the use of the fscache API by AFS and
the introduction of support for features such as Transparent Huge
Pages (THPs).
- Add some support for THPs, including using core VM helper functions
to find details of pages.
- Use the ITER_XARRAY I/O iterator to mediate access to the pagecache
as this handles THPs and doesn't require allocation of large bvec
arrays.
- Delegate address_space read/pre-write I/O methods for AFS to the
netfs helper library. A method is provided to the library that
allows it to issue a read against the server.
This includes a change in use for PG_fscache (it now indicates a
DIO write in progress from the marked page), so a number of waits
need to be deployed for it.
- Split the core AFS writeback function to make it easier to modify
in future patches to handle writing to the cache. [This might
feasibly make more sense moved out into my fscache-iter branch].
I've tested these with "xfstests -g quick" against an AFS volume
(xfstests needs patching to make it work). With this, AFS without a
cache passes all expected xfstests; with a cache, there's an extra
failure, but that's also there before these patches. Fixing that
probably requires a greater overhaul (as can be found on my
fscache-iter branch, but that's for a later time).
Thanks should go to Marc Dionne and Jeff Altman of AuriStor for
exercising the patches in their test farm also"
Link: https://lore.kernel.org/lkml/3785063.1619482429@warthog.procyon.org.uk/
* tag 'afs-netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use the netfs_write_begin() helper
afs: Use new netfs lib read helper API
afs: Use the fs operation ops to handle FetchData completion
afs: Prepare for use of THPs
afs: Extract writeback extension into its own function
afs: Wait on PG_fscache before modifying/releasing a page
afs: Use ITER_XARRAY for writing
afs: Set up the iov_iter before calling afs_extract_data()
afs: Log remote unmarshalling errors
afs: Don't truncate iter during data fetch
afs: Move key to afs_read struct
afs: Print the operation debug_id when logging an unexpected data version
afs: Pass page into dirty region helpers to provide THP size
afs: Disable use of the fscache I/O routines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull network filesystem helper library updates from David Howells:
"Here's a set of patches for 5.13 to begin the process of overhauling
the local caching API for network filesystems. This set consists of
two parts:
(1) Add a helper library to handle the new VM readahead interface.
This is intended to be used unconditionally by the filesystem
(whether or not caching is enabled) and provides a common
framework for doing caching, transparent huge pages and, in the
future, possibly fscrypt and read bandwidth maximisation. It also
allows the netfs and the cache to align, expand and slice up a
read request from the VM in various ways; the netfs need only
provide a function to read a stretch of data to the pagecache and
the helper takes care of the rest.
(2) Add an alternative fscache/cachfiles I/O API that uses the kiocb
facility to do async DIO to transfer data to/from the netfs's
pages, rather than using readpage with wait queue snooping on one
side and vfs_write() on the other. It also uses less memory, since
it doesn't do buffered I/O on the backing file.
Note that this uses SEEK_HOLE/SEEK_DATA to locate the data
available to be read from the cache. Whilst this is an improvement
from the bmap interface, it still has a problem with regard to a
modern extent-based filesystem inserting or removing bridging
blocks of zeros. Fixing that requires a much greater overhaul.
This is a step towards overhauling the fscache API. The change is
opt-in on the part of the network filesystem. A netfs should not try
to mix the old and the new API because of conflicting ways of handling
pages and the PG_fscache page flag and because it would be mixing DIO
with buffered I/O. Further, the helper library can't be used with the
old API.
This does not change any of the fscache cookie handling APIs or the
way invalidation is done at this time.
In the near term, I intend to deprecate and remove the old I/O API
(fscache_allocate_page{,s}(), fscache_read_or_alloc_page{,s}(),
fscache_write_page() and fscache_uncache_page()) and eventually
replace most of fscache/cachefiles with something simpler and easier
to follow.
This patchset contains the following parts:
- Some helper patches, including provision of an ITER_XARRAY iov
iterator and a function to do readahead expansion.
- Patches to add the netfs helper library.
- A patch to add the fscache/cachefiles kiocb API.
- A pair of patches to fix some review issues in the ITER_XARRAY and
read helpers as spotted by Al and Willy.
Jeff Layton has patches to add support in Ceph for this that he
intends for this merge window. I have a set of patches to support AFS
that I will post a separate pull request for.
With this, AFS without a cache passes all expected xfstests; with a
cache, there's an extra failure, but that's also there before these
patches. Fixing that probably requires a greater overhaul. Ceph also
passes the expected tests.
I also have patches in a separate branch to tidy up the handling of
PG_fscache/PG_private_2 and their contribution to page refcounting in
the core kernel here, but I haven't included them in this set and will
route them separately"
Link: https://lore.kernel.org/lkml/3779937.1619478404@warthog.procyon.org.uk/
* tag 'netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Miscellaneous fixes
iov_iter: Four fixes for ITER_XARRAY
fscache, cachefiles: Add alternate API to use kiocb for read/write to cache
netfs: Add a tracepoint to log failures that would be otherwise unseen
netfs: Define an interface to talk to a cache
netfs: Add write_begin helper
netfs: Gather stats
netfs: Add tracepoints
netfs: Provide readahead and readpage netfs helpers
netfs, mm: Add set/end/wait_on_page_fscache() aliases
netfs, mm: Move PG_fscache helper funcs to linux/netfs.h
netfs: Documentation for helper library
netfs: Make a netfs helper module
mm: Implement readahead_control pageset expansion
mm/readahead: Handle ractl nr_pages being modified
fs: Document file_ra_state
mm/filemap: Pass the file_ra_state in the ractl
mm: Add set/end/wait functions for PG_private_2
iov_iter: Add ITER_XARRAY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fs mapping helper updates from Christian Brauner:
"This adds kernel-doc to all new idmapping helpers and improves their
naming which was triggered by a discussion with some fs developers.
Some of the names are based on suggestions by Vivek and Al.
Also remove the open-coded permission checking in a few places with
simple helpers. Overall this should lead to more clarity and make it
easier to maintain"
* tag 'fs.idmapped.helpers.v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: introduce two inode i_{u,g}id initialization helpers
fs: introduce fsuidgid_has_mapping() helper
fs: document and rename fsid helpers
fs: document mapping helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fs helper kernel-doc updates from Christian Brauner:
"In the last cycles we forgot to update the kernel-docs in some places
that were changed during the idmapped mount work. Lukas and Randy took
the chance to not just fixup those places but also fixup and expand
kernel-docs for some additional helpers.
No functional changes"
* tag 'fs.idmapped.docs.v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: update kernel-doc for vfs_rename()
fs: turn some comments into kernel-doc
xattr: fix kernel-doc for mnt_userns and vfs xattr helpers
namei: fix kernel-doc for struct renamedata and more
libfs: fix kernel-doc for mnt_userns
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fileattr conversion updates from Miklos Szeredi via Al Viro:
"This splits the handling of FS_IOC_[GS]ETFLAGS from ->ioctl() into a
separate method.
The interface is reasonably uniform across the filesystems that
support it and gives nice boilerplate removal"
* 'miklos.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
ovl: remove unneeded ioctls
fuse: convert to fileattr
fuse: add internal open/release helpers
fuse: unsigned open flags
fuse: move ioctl to separate source file
vfs: remove unused ioctl helpers
ubifs: convert to fileattr
reiserfs: convert to fileattr
ocfs2: convert to fileattr
nilfs2: convert to fileattr
jfs: convert to fileattr
hfsplus: convert to fileattr
efivars: convert to fileattr
xfs: convert to fileattr
orangefs: convert to fileattr
gfs2: convert to fileattr
f2fs: convert to fileattr
ext4: convert to fileattr
ext2: convert to fileattr
btrfs: convert to fileattr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull coredump updates from Al Viro:
"Just a couple of patches this cycle: use of seek + write instead of
expanding truncate and minor header cleanup"
* 'work.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
coredump.h: move CONFIG_COREDUMP-only stuff inside the ifdef
coredump: don't bother with do_truncate()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs inode type handling updates from Al Viro:
"We should never change the type bits of ->i_mode or the method tables
(->i_op and ->i_fop) of a live inode.
Unfortunately, not all filesystems took care to prevent that"
* 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
spufs: fix bogosity in S_ISGID handling
9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
openpromfs: don't do unlock_new_inode() until the new inode is set up
hostfs_mknod(): don't bother with init_special_inode()
cifs: have cifs_fattr_to_inode() refuse to change type on live inode
cifs: have ->mkdir() handle race with another client sanely
do_cifs_create(): don't set ->i_mode of something we had not created
gfs2: be careful with inode refresh
ocfs2_inode_lock_update(): make sure we don't change the type bits of i_mode
orangefs_inode_is_stale(): i_mode type bits do *not* form a bitmap...
vboxsf: don't allow to change the inode type
afs: Fix updating of i_mode due to 3rd party change
ceph: don't allow type or device number to change on non-I_NEW inodes
ceph: fix up error handling with snapdirs
new helper: inode_wrong_type()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
|
