summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2008-01-25Preempt-RCU: reorganize RCU code into rcuclassic.c and rcupdate.cPaul E. McKenney2-119/+210
This patch re-organizes the RCU code to enable multiple implementations of RCU. Users of RCU continues to include rcupdate.h and the RCU interfaces remain the same. This is in preparation for subsequently merging the preemptible RCU implementation. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25Preempt-RCU: Use softirq instead of tasklets forDipankar Sarma1-0/+1
This patch makes RCU use softirq instead of tasklets. It also adds a memory barrier after raising the softirq inorder to ensure that the cpu sees the most recently updated value of rcu->cur while processing callbacks. The discussion of the related theoretical race pointed out by James Huang can be found here --> http://lkml.org/lkml/2007/11/20/603 Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com> Reviewed-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: RT-balance, add new methods to sched_classSteven Rostedt1-0/+7
Dmitry Adamushko found that the current implementation of the RT balancing code left out changes to the sched_setscheduler and rt_mutex_setprio. This patch addresses this issue by adding methods to the schedule classes to handle being switched out of (switched_from) and being switched into (switched_to) a sched_class. Also a method for changing of priorities is also added (prio_changed). This patch also removes some duplicate logic between rt_mutex_setprio and sched_setscheduler. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: RT-balance, replace hooks with pre/post schedule and wakeup methodsSteven Rostedt1-0/+3
To make the main sched.c code more agnostic to the schedule classes. Instead of having specific hooks in the schedule code for the RT class balancing. They are replaced with a pre_schedule, post_schedule and task_wake_up methods. These methods may be used by any of the classes but currently, only the sched_rt class implements them. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: whitespace cleanups in topology.hIngo Molnar1-1/+1
whitespace cleanups in topology.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: reactivate fork balancingIngo Molnar1-0/+3
reactivate fork balancing. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: add sched-domain rootsGregory Haskins1-0/+3
We add the notion of a root-domain which will be used later to rescope global variables to per-domain variables. Each exclusive cpuset essentially defines an island domain by fully partitioning the member cpus from any other cpuset. However, we currently still maintain some policy/state as global variables which transcend all cpusets. Consider, for instance, rt-overload state. Whenever a new exclusive cpuset is created, we also create a new root-domain object and move each cpu member to the root-domain's span. By default the system creates a single root-domain with all cpus as members (mimicking the global state we have today). We add some plumbing for storing class specific data in our root-domain. Whenever a RQ is switching root-domains (because of repartitioning) we give each sched_class the opportunity to remove any state from its old domain and add state to the new one. This logic doesn't have any clients yet but it will later in the series. Signed-off-by: Gregory Haskins <ghaskins@novell.com> CC: Christoph Lameter <clameter@sgi.com> CC: Paul Jackson <pj@sgi.com> CC: Simon Derr <simon.derr@bull.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: de-SCHED_OTHER-ize the RT pathGregory Haskins1-0/+1
The current wake-up code path tries to determine if it can optimize the wake-up to "this_cpu" by computing load calculations. The problem is that these calculations are only relevant to SCHED_OTHER tasks where load is king. For RT tasks, priority is king. So the load calculation is completely wasted bandwidth. Therefore, we create a new sched_class interface to help with pre-wakeup routing decisions and move the load calculation as a function of CFS task's class. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: add RT-balance cpu-weightGregory Haskins2-0/+3
Some RT tasks (particularly kthreads) are bound to one specific CPU. It is fairly common for two or more bound tasks to get queued up at the same time. Consider, for instance, softirq_timer and softirq_sched. A timer goes off in an ISR which schedules softirq_thread to run at RT50. Then the timer handler determines that it's time to smp-rebalance the system so it schedules softirq_sched to run. So we are in a situation where we have two RT50 tasks queued, and the system will go into rt-overload condition to request other CPUs for help. This causes two problems in the current code: 1) If a high-priority bound task and a low-priority unbounded task queue up behind the running task, we will fail to ever relocate the unbounded task because we terminate the search on the first unmovable task. 2) We spend precious futile cycles in the fast-path trying to pull overloaded tasks over. It is therefore optimial to strive to avoid the overhead all together if we can cheaply detect the condition before overload even occurs. This patch tries to achieve this optimization by utilizing the hamming weight of the task->cpus_allowed mask. A weight of 1 indicates that the task cannot be migrated. We will then utilize this information to skip non-migratable tasks and to eliminate uncessary rebalance attempts. We introduce a per-rq variable to count the number of migratable tasks that are currently running. We only go into overload if we have more than one rt task, AND at least one of them is migratable. In addition, we introduce a per-task variable to cache the cpus_allowed weight, since the hamming calculation is probably relatively expensive. We only update the cached value when the mask is updated which should be relatively infrequent, especially compared to scheduling frequency in the fast path. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25softlockup: automatically detect hung TASK_UNINTERRUPTIBLE tasksIngo Molnar2-0/+15
this patch extends the soft-lockup detector to automatically detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are printed the following way: ------------------> INFO: task prctl:3042 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message prctl D fd5e3793 0 3042 2997 f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286 f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000 f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b Call Trace: [<c04883a5>] schedule_timeout+0x6d/0x8b [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17 [<c0133a76>] msleep+0x10/0x16 [<c0138974>] sys_prctl+0x30/0x1e2 [<c0104c52>] sysenter_past_esp+0x5f/0xa5 ======================= 2 locks held by prctl/3042: #0: (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a #1: (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9 <------------------ the current default timeout is 120 seconds. Such messages are printed up to 10 times per bootup. If the system has crashed already then the messages are not printed. if lockdep is enabled then all held locks are printed as well. this feature is a natural extension to the softlockup-detector (kernel locked up without scheduling) and to the NMI watchdog (kernel locked up with IRQs disabled). [ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ] [ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-01-25cpu-hotplug: fix build on !CONFIG_SMPIngo Molnar1-1/+7
fix build on !CONFIG_SMP. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25cpu-hotplug: replace per-subsystem mutexes with get_online_cpus()Gautham R Shenoy1-3/+1
This patch converts the known per-subsystem mutexes to get_online_cpus put_online_cpus. It also eliminates the CPU_LOCK_ACQUIRE and CPU_LOCK_RELEASE hotplug notification events. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25cpu-hotplug: replace lock_cpu_hotplug() with get_online_cpus()Gautham R Shenoy1-4/+4
Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use get_online_cpus and put_online_cpus instead as it highlights the refcount semantics in these operations. The new API guarantees protection against the cpu-hotplug operation, but it doesn't guarantee serialized access to any of the local data structures. Hence the changes needs to be reviewed. In case of pseries_add_processor/pseries_remove_processor, use cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the cpu_present_map there. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25cpu-hotplug: refcount based cpu hotplugGautham R Shenoy1-0/+3
This patch implements a Refcount + Waitqueue based model for cpu-hotplug. Now, a thread which wants to prevent cpu-hotplug, will bump up a global refcount and the thread which wants to perform a cpu-hotplug operation will block till the global refcount goes to zero. The readers, if any, during an ongoing cpu-hotplug operation are blocked until the cpu-hotplug operation is over. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Paul Jackson <pj@sgi.com> [For !CONFIG_HOTPLUG_CPU ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25sched: group scheduler, fix fairness of cpu bandwidth allocation for task groupsSrivatsa Vaddagiri1-0/+4
The current load balancing scheme isn't good enough for precise group fairness. For example: on a 8-cpu system, I created 3 groups as under: a = 8 tasks (cpu.shares = 1024) b = 4 tasks (cpu.shares = 1024) c = 3 tasks (cpu.shares = 1024) a, b and c are task groups that have equal weight. We would expect each of the groups to receive 33.33% of cpu bandwidth under a fair scheduler. This is what I get with the latest scheduler git tree: Signed-off-by: Ingo Molnar <mingo@elte.hu> -------------------------------------------------------------------------------- Col1 | Col2 | Col3 | Col4 ------|---------|-------|------------------------------------------------------- a | 277.676 | 57.8% | 54.1% 54.1% 54.1% 54.2% 56.7% 62.2% 62.8% 64.5% b | 116.108 | 24.2% | 47.4% 48.1% 48.7% 49.3% c | 86.326 | 18.0% | 47.5% 47.9% 48.5% -------------------------------------------------------------------------------- Explanation of o/p: Col1 -> Group name Col2 -> Cumulative execution time (in seconds) received by all tasks of that group in a 60sec window across 8 cpus Col3 -> CPU bandwidth received by the group in the 60sec window, expressed in percentage. Col3 data is derived as: Col3 = 100 * Col2 / (NR_CPUS * 60) Col4 -> CPU bandwidth received by each individual task of the group. Col4 = 100 * cpu_time_recd_by_task / 60 [I can share the test case that produces a similar o/p if reqd] The deviation from desired group fairness is as below: a = +24.47% b = -9.13% c = -15.33% which is quite high. After the patch below is applied, here are the results: -------------------------------------------------------------------------------- Col1 | Col2 | Col3 | Col4 ------|---------|-------|------------------------------------------------------- a | 163.112 | 34.0% | 33.2% 33.4% 33.5% 33.5% 33.7% 34.4% 34.8% 35.3% b | 156.220 | 32.5% | 63.3% 64.5% 66.1% 66.5% c | 160.653 | 33.5% | 85.8% 90.6% 91.4% -------------------------------------------------------------------------------- Deviation from desired group fairness is as below: a = +0.67% b = -0.83% c = +0.17% which is far better IMO. Most of other runs have yielded a deviation within +-2% at the most, which is good. Why do we see bad (group) fairness with current scheuler? ========================================================= Currently cpu's weight is just the summation of individual task weights. This can yield incorrect results. For ex: consider three groups as below on a 2-cpu system: CPU0 CPU1 --------------------------- A (10) B(5) C(5) --------------------------- Group A has 10 tasks, all on CPU0, Group B and C have 5 tasks each all of which are on CPU1. Each task has the same weight (NICE_0_LOAD = 1024). The current scheme would yield a cpu weight of 10240 (10*1024) for each cpu and the load balancer will think both CPUs are perfectly balanced and won't move around any tasks. This, however, would yield this bandwidth: A = 50% B = 25% C = 25% which is not the desired result. What's changing in the patch? ============================= - How cpu weights are calculated when CONFIF_FAIR_GROUP_SCHED is defined (see below) - API Change - Two tunables introduced in sysfs (under SCHED_DEBUG) to control the frequency at which the load balance monitor thread runs. The basic change made in this patch is how cpu weight (rq->load.weight) is calculated. Its now calculated as the summation of group weights on a cpu, rather than summation of task weights. Weight exerted by a group on a cpu is dependent on the shares allocated to it and also the number of tasks the group has on that cpu compared to the total number of (runnable) tasks the group has in the system. Let, W(K,i) = Weight of group K on cpu i T(K,i) = Task load present in group K's cfs_rq on cpu i T(K) = Total task load of group K across various cpus S(K) = Shares allocated to group K NRCPUS = Number of online cpus in the scheduler domain to which group K is assigned. Then, W(K,i) = S(K) * NRCPUS * T(K,i) / T(K) A load balance monitor thread is created at bootup, which periodically runs and adjusts group's weight on each cpu. To avoid its overhead, two min/max tunables are introduced (under SCHED_DEBUG) to control the rate at which it runs. Fixes from: Peter Zijlstra <a.p.zijlstra@chello.nl> - don't start the load_balance_monitor when there is only a single cpu. - rename the kthread because its currently longer than TASK_COMM_LEN Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25Merge branch 'for-linus' of ↵Linus Torvalds2-10/+52
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: selinux: make mls_compute_sid always polyinstantiate security/selinux: constify function pointer tables and fields security: add a secctx_to_secid() hook security: call security_file_permission from rw_verify_area security: remove security_sb_post_mountroot hook Security: remove security.h include from mm.h Security: remove security_file_mmap hook sparse-warnings (NULL as 0). Security: add get, set, and cloning of superblock security information security/selinux: Add missing "space"
2008-01-25Merge branch 'for-linus' of ↵Linus Torvalds9-10/+41
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] extint: Set initial irq type to low level [AVR32] extint: change set_irq_type() handling [AVR32] NMI debugging [AVR32] constify function pointer tables [AVR32] ATNGW100: Update defconfig [AVR32] ATSTK1002: Update defconfig [AVR32] Kconfig: Choose daughterboard instead of CPU [AVR32] Add support for ATSTK1003 and ATSTK1004 [AVR32] Clean up external DAC setup code [AVR32] ATSTK1000: Move gpio-leds setup to setup.c [AVR32] Add support for AT32AP7001 and AT32AP7002 [AVR32] Provide more CPU information in /proc/cpuinfo and dmesg [AVR32] Oprofile support [AVR32] Include instrumentation menu Disable VGA text console for AVR32 architecture [AVR32] Enable debugging only when needed ptrace: Call arch_ptrace_attach() when request=PTRACE_TRACEME [AVR32] Remove redundant try_to_freeze() call from do_signal() [AVR32] Drop GFP_COMP for DMA memory allocations
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds13-46/+723
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (125 commits) [CRYPTO] twofish: Merge common glue code [CRYPTO] hifn_795x: Fixup container_of() usage [CRYPTO] cast6: inline bloat-- [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long [CRYPTO] tcrypt: Make xcbc available as a standalone test [CRYPTO] xcbc: Remove bogus hash/cipher test [CRYPTO] xcbc: Fix algorithm leak when block size check fails [CRYPTO] tcrypt: Zero axbuf in the right function [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20 [CRYPTO] tcrypt: Add select of AEAD [CRYPTO] salsa20: Add x86-64 assembly version [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version) [CRYPTO] gcm: Introduce rfc4106 [CRYPTO] api: Show async type [CRYPTO] chainiv: Avoid lock spinning where possible [CRYPTO] seqiv: Add select AEAD in Kconfig [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy [CRYPTO] null: Allow setkey on digest_null ...
2008-01-25[AVR32] NMI debuggingHaavard Skinnemoen2-0/+6
Change the NMI handler to use the die notifier chain to signal anyone who cares. Add a simple "nmi debugger" which hooks into this chain and that may dump registers, task state, etc. when it happens. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] Add support for AT32AP7001 and AT32AP7002Haavard Skinnemoen3-6/+6
These are derivatives of the AT32AP7000 chip, which means that most of the code stays the same. Rename a few files, functions, definitions and config symbols to reflect that they apply to all AP700x chips, and exclude some platform devices from chips where they aren't present. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] Provide more CPU information in /proc/cpuinfo and dmesgHaavard Skinnemoen1-0/+14
Add the following fields to /proc/cpuinfo: * chip type and revision (from the JTAG chip id) * cpu MHz (from clk_get_rate()) * features (from the CONFIG0 register) Also rename "cpu family" to "cpu arch" and "cpu type" to "cpu core" to remove some ambiguity. Show chip type and revision at bootup, and clarify that the other kinds of IDs that we're already printing are for the cpu core and architecture. Rename "AP7000" to "AP7" since that's the name of the core. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] Enable debugging only when neededHaavard Skinnemoen3-4/+15
Keep track of processes being debugged (including the kernel itself) and turn the OCD system on and off as appropriate. Since enabling debugging turns off some optimizations in the CPU core, this fixes the issue that enabling KProbes support or simply running a program under gdbserver will reduce system performance significantly until the next reboot. The CPU performance will still be reduced for all processes while a process is being debugged, but this is a lot better than reducing the performance forever. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-24Kobject: fix coding style issues in kobject.hGreg Kroah-Hartman1-33/+34
Finally clean up the odd spaces and other mess in kobject.h Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver core: fix coding style issues in device.hGreg Kroah-Hartman1-138/+145
Finally clean up the odd spaces and other mess in device.h Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver Core: add class iteration apiDave Young1-2/+7
Add the following class iteration functions for driver use: class_for_each_device class_find_device class_for_each_child class_find_child Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver Core: constify the name passed to platform_device_register_simpleStephen Rothwell1-1/+1
This name is just passed to platform_device_alloc which has its parameter declared const. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver core: change sysdev classes to use dynamic kobject namesKay Sievers2-11/+3
All kobjects require a dynamically allocated name now. We no longer need to keep track if the name is statically assigned, we can just unconditionally free() all kobject names on cleanup. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: remove kobject_unregister() as no one uses it anymoreGreg Kroah-Hartman1-2/+0
There are no in-kernel users of kobject_unregister() so it should be removed. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: auto-cleanup on final unrefKay Sievers1-0/+5
We save the current state in the object itself, so we can do proper cleanup when the last reference is dropped. If the initial reference is dropped, the object will be removed from sysfs if needed, if an "add" event was sent, "remove" will be send, and the allocated resources are released. This allows us to clean up some driver core usage as well as allowing us to do other such changes to the rest of the kernel. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kset: remove kset_add functionGreg Kroah-Hartman1-1/+0
No one is calling this anymore, so just remove it and hard-code the one internal-use of it. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: remove kobject_register()Greg Kroah-Hartman1-1/+0
The function is no longer used by anyone in the kernel, and it prevents the proper sending of the kobject uevent after the needed files are set up by the caller. kobject_init_and_add() can be used in its place. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: rename kobject_init_ng() to kobject_init()Greg Kroah-Hartman1-1/+1
Now that the old kobject_init() function is gone, rename kobject_init_ng() to kobject_init() to clean up the namespace. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: remove kobject_init() as no one uses it anymoreGreg Kroah-Hartman1-1/+0
The old kobject_init() function is on longer in use, so let us remove it from the public scope (kset mess in the kobject.c file still uses it, but that can be cleaned up later very simply.) Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: rename kobject_add_ng() to kobject_add()Greg Kroah-Hartman1-3/+3
Now that the old kobject_add() function is gone, rename kobject_add_ng() to kobject_add() to clean up the namespace. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: remove kobject_add() as no one uses it anymoreGreg Kroah-Hartman1-1/+0
The old kobject_add() function is on longer in use, so let us remove it from the public scope (kset mess in the kobject.c file still uses it, but that can be cleaned up later very simply.) Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver core: convert block from raw kobjects to core devicesKay Sievers1-14/+23
This moves the block devices to /sys/class/block. It will create a flat list of all block devices, with the disks and partitions in one directory. For compatibility /sys/block is created and contains symlinks to the disks. /sys/class/block |-- sda -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda |-- sda1 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1 |-- sda10 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10 |-- sda5 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5 |-- sda6 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6 |-- sda7 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7 |-- sda8 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8 |-- sda9 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9 `-- sr0 -> ../../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 /sys/block/ |-- sda -> ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda `-- sr0 -> ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver core: move the static kobject out of struct driverGreg Kroah-Hartman1-9/+7
This patch removes the kobject, and a few other driver-core-only fields out of struct driver and into the driver core only. Now drivers can be safely create on the stack or statically (like they currently are.) Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver core: move the driver specific module code into the driver coreGreg Kroah-Hartman1-15/+0
The module driver specific code should belong in the driver core, not in the kernel/ directory. So move this code. This is done in preparation for some struct device_driver rework that should be confined to the driver core code only. This also lets us keep from exporting these functions, as no external code should ever be calling it. Thanks to Andrew Morton for the !CONFIG_MODULES fix. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver: add driver_add_kobj for looney iseries_veth driverGreg Kroah-Hartman1-0/+4
The iseries driver wants to hang kobjects off of its driver, so, to preserve backwards compatibility, we need to add a call to the driver core to allow future changes to work properly. Hopefully no one uses this function in the future and the iseries_veth driver authors come to their senses so I can remove this hack... Cc: Dave Larson <larson1@us.ibm.com> Cc: Santiago Leon <santil@us.ibm.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24driver core: Introduce default attribute groups.Cornelia Huck1-0/+1
This is lot like default attributes for devices (and indeed, a lot of the code is lifted from there). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24driver core: remove fields from struct bus_typeGreg Kroah-Hartman1-10/+2
struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24driver core: add way to get to bus device klistGreg Kroah-Hartman1-0/+1
This allows an easier way to get to the device klist associated with a struct bus_type (you have three to choose from...) This will make it easier to move these fields to be dynamic in a future patch. The only user of this is the PCI core which horribly abuses this interface to rearrange the order of the pci devices. This should be done using the existing bus device walking functions, but that's left for future patches. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24driver core: add way to get to bus ksetGreg Kroah-Hartman1-0/+2
This allows an easier way to get to the kset associated with a struct bus_type (you have three to choose from...) This will make it easier to move these fields to be dynamic in a future patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24driver core: remove owner field from struct bus_typeGreg Kroah-Hartman1-1/+0
This isn't used by anything in the driver core, and by no one in the 204 different usages of it in the kernel tree. Remove this field so no one gets any idea that it is needed to be used. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: change drivers/infiniband to use kobject_init_and_addGreg Kroah-Hartman1-1/+1
Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <mshefty@ichips.intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24UIO: fix kobject usageGreg Kroah-Hartman1-2/+4
The uio kobject code is "wierd". This patch should hopefully fix it up to be sane and not leak memory anymore. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24driver core: make /sys/power a kobjectGreg Kroah-Hartman1-2/+2
/sys/power should not be a kset, that's overkill. This patch renames it to power_kset and fixes up all usages of it in the tree. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24kobject: remove subsystem_(un)register functionsGreg Kroah-Hartman1-3/+0
These functions are no longer used and are the last remants of the old subsystem crap. So delete them for good. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24kobject: convert kernel_kset to be a kobjectGreg Kroah-Hartman1-2/+2
kernel_kset does not need to be a kset, but a much simpler kobject now that we have kobj_attributes. We also rename kernel_kset to kernel_kobj to catch all users of this symbol with a build error instead of an easy-to-ignore build warning. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24kset: remove decl_subsys macroGreg Kroah-Hartman1-6/+0
This macro is no longer used. ksets should be created dynamically with a call to kset_create_and_add() not declared statically. Yes, there are 5 remaining static struct kset usages in the kernel tree, but they will be fixed up soon. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 19:59:03 +0000