summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2010-06-25snmp: add align parameter to snmp_mib_init()Eric Dumazet1-1/+1
In preparation for 64bit snmp counters for some mibs, add an 'align' parameter to snmp_mib_init(), instead of assuming mibs only contain 'unsigned long' fields. Callers can use __alignof__(type) to provide correct alignment. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25net: optimize Berkeley Packet Filter (BPF) processingHagen Paul Pfeifer1-0/+48
Gcc is currenlty not in the ability to optimize the switch statement in sk_run_filter() because of dense case labels. This patch replace the OR'd labels with ordered sequenced case labels. The sk_chk_filter() function is modified to patch/replace the original OPCODES in a ordered but equivalent form. gcc is now in the ability to transform the switch statement in sk_run_filter into a jump table of complexity O(1). Until this patch gcc generates a sequence of conditional branches (O(n) of 567 byte .text segment size (arch x86_64): 7ff: 8b 06 mov (%rsi),%eax 801: 66 83 f8 35 cmp $0x35,%ax 805: 0f 84 d0 02 00 00 je adb <sk_run_filter+0x31d> 80b: 0f 87 07 01 00 00 ja 918 <sk_run_filter+0x15a> 811: 66 83 f8 15 cmp $0x15,%ax 815: 0f 84 c5 02 00 00 je ae0 <sk_run_filter+0x322> 81b: 77 73 ja 890 <sk_run_filter+0xd2> 81d: 66 83 f8 04 cmp $0x4,%ax 821: 0f 84 17 02 00 00 je a3e <sk_run_filter+0x280> 827: 77 29 ja 852 <sk_run_filter+0x94> 829: 66 83 f8 01 cmp $0x1,%ax [...] With the modification the compiler translate the switch statement into the following jump table fragment: 7ff: 66 83 3e 2c cmpw $0x2c,(%rsi) 803: 0f 87 1f 02 00 00 ja a28 <sk_run_filter+0x26a> 809: 0f b7 06 movzwl (%rsi),%eax 80c: ff 24 c5 00 00 00 00 jmpq *0x0(,%rax,8) 813: 44 89 e3 mov %r12d,%ebx 816: e9 43 03 00 00 jmpq b5e <sk_run_filter+0x3a0> 81b: 41 89 dc mov %ebx,%r12d 81e: e9 3b 03 00 00 jmpq b5e <sk_run_filter+0x3a0> Furthermore, I reordered the instructions to reduce cache line misses by order the most common instruction to the start. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24broadcom: Add 5241 supportDmitry Baryshkov1-0/+1
This patch adds the 5241 PHY ID to the broadcom module. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24broadcom: move all PHY_ID's to headerDmitry Baryshkov1-0/+6
Move all PHY IDs to brcmphy.h header for completeness and unification of code. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/ipv4/ip_output.c
2010-06-23net - IP_NODEFRAG option for IPv4 socketJiri Olsa2-1/+3
this patch is implementing IP_NODEFRAG option for IPv4 socket. The reason is, there's no other way to send out the packet with user customized header of the reassembly part. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23net: Introduce u64_stats_sync infrastructureEric Dumazet1-0/+107
To properly implement 64bits network statistics on 32bit or 64bit hosts, we provide one new type and four methods, to ease conversions. Stats producer should use following template granted it already got an exclusive access to counters (include/linux/u64_stats_sync.h contains some documentation about details) u64_stats_update_begin(&stats->syncp); stats->bytes64 += len; stats->packets64++; u64_stats_update_end(&stats->syncp); While a consumer should use following template to get consistent snapshot : u64 tbytes, tpackets; unsigned int start; do { start = u64_stats_fetch_begin(&stats->syncp); tbytes = stats->bytes64; tpackets = stats->packets64; } while (u64_stats_fetch_retry(&stats->lock, syncp)); Suggested by David Miller, and comments courtesy of Nick Piggin. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23net: Fix a typo in netlink.hJustin P. Mattock1-1/+1
Fix a typo in include/net/netlink.h should be finalize instead of finanlize Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23snmp: fix SNMP_ADD_STATS()Eric Dumazet1-1/+1
commit aa2ea0586d9d (tcp: fix outsegs stat for TSO segments) incorrectly assumed SNMP_ADD_STATS() was used from BH context. Fix this using mib[!in_softirq()] instead of mib[0] Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-20caif: Add debug connection type for CAIF.Sjur Braendeland1-0/+34
Added new CAIF protocol type CAIFPROTO_DEBUG for accessing CAIF debug on the ST Ericsson modems. There are two debug servers on the modem, one for radio related debug (CAIF_RADIO_DEBUG_SERVICE) and the other for communication/application related debug (CAIF_COM_DEBUG_SERVICE). The debug connection can contain trace debug printouts or interactive debug used for debugging and test. Debug connections can be of type STREAM or SEQPACKET. Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-20caif: Use link layer MTU instead of fixed MTUSjur Braendeland3-12/+18
Previously CAIF supported maximum transfer size of ~4050. The transfer size is now calculated dynamically based on the link layers mtu size. Signed-off-by: Sjur Braendeland@stericsson.com Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-20caif: Bugfix - RFM must support segmentation.Sjur Braendeland1-2/+7
CAIF Remote File Manager may send or receive more than 4050 bytes. Due to this The CAIF RFM service have to support segmentation. Signed-off-by: Sjur Braendeland@stericsson.com Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-20caif: Bugfix not all services uses flow-ctrl.Sjur Braendeland1-2/+4
Flow control is not used by all CAIF services. The usage of flow control is now part of the gerneal initialization function for CAIF Services. Signed-off-by: Sjur Braendeland@stericsson.com Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-17Merge branch 'master' of ↵David S. Miller2-46/+30
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-06-16udp: Add UFO to NETIF_F_SOFTWARE_GSOHerbert Xu1-1/+2
This patch adds UFO to the list of GSO features with a software fallback. This allows UFO to be used even if the hardware does not support it. In particular, this allows us to test the UFO fallback, as it has been reported to not work in some cases. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16af_unix: Allow credentials to work across user and pid namespaces.Eric W. Biederman1-2/+2
In unix_skb_parms store pointers to struct pid and struct cred instead of raw uid, gid, and pid values, then translate the credentials on reception into values that are meaningful in the receiving processes namespaces. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16scm: Capture the full credentials of the scm sender.Eric W. Biederman1-4/+24
Start capturing not only the userspace pid, uid and gid values of the sending process but also the struct pid and struct cred of the sending process as well. This is in preparation for properly supporting SCM_CREDENTIALS for sockets that have different uid and/or pid namespaces at the different ends. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Serge E. Hallyn <serge@hallyn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16af_unix: Allow SO_PEERCRED to work across namespaces.Eric W. Biederman1-1/+2
Use struct pid and struct cred to store the peer credentials on struct sock. This gives enough information to convert the peer credential information to a value relative to whatever namespace the socket is in at the time. This removes nasty surprises when using SO_PEERCRED on socket connetions where the processes on either side are in different pid and user namespaces. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16sock: Introduce cred_to_ucredEric W. Biederman1-0/+5
To keep the coming code clear and to allow both the sock code and the scm code to share the logic introduce a fuction to translate from struct cred to struct ucred. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16user_ns: Introduce user_nsmap_uid and user_ns_map_gid.Eric W. Biederman1-0/+14
Define what happens when a we view a uid from one user_namespace in another user_namepece. - If the user namespaces are the same no mapping is necessary. - For most cases of difference use overflowuid and overflowgid, the uid and gid currently used for 16bit apis when we have a 32bit uid that does fit in 16bits. Effectively the situation is the same, we want to return a uid or gid that is not assigned to any user. - For the case when we happen to be mapping the uid or gid of the creator of the target user namespace use uid 0 and gid as confusing that user with root is not a problem. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16scm: Reorder scm_cookie.Eric W. Biederman1-1/+1
Reorder the fields in scm_cookie so they pack better on 64bit. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16syncookies: check decoded options against sysctl settingsFlorian Westphal1-1/+1
Discard the ACK if we find options that do not match current sysctl settings. Previously it was possible to create a connection with sack, wscale, etc. enabled even if the feature was disabled via sysctl. Also remove an unneeded call to tcp_sack_reset() in cookie_check_timestamp: Both call sites (cookie_v4_check, cookie_v6_check) zero "struct tcp_options_received", hand it to tcp_parse_options() (which does not change tcp_opt->num_sacks/dsack) and then call cookie_check_timestamp(). Even if num_sacks/dsacks were changed, the structure is allocated on the stack and after cookie_check_timestamp returns only a few selected members are copied to the inet_request_sock. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16inetpeer: restore small inet_peer structuresEric Dumazet1-5/+26
Addition of rcu_head to struct inet_peer added 16bytes on 64bit arches. Thats a bit unfortunate, since old size was exactly 64 bytes. This can be solved, using an union between this rcu_head an four fields, that are normally used only when a refcount is taken on inet_peer. rcu_head is used only when refcnt=-1, right before structure freeing. Add a inet_peer_refcheck() function to check this assertion for a while. We can bring back SLAB_HWCACHE_ALIGN qualifier in kmem cache creation. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15netpoll: Use correct primitives for RCU dereferencingHerbert Xu1-2/+2
Now that RCU debugging checks for matching rcu_dereference calls and rcu_read_lock, we need to use the correct primitives or face nasty warnings. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15net: NET_SKB_PAD should depend on L1_CACHE_BYTESEric Dumazet1-3/+5
In old kernels, NET_SKB_PAD was defined to 16. Then commit d6301d3dd1c2 (net: Increase default NET_SKB_PAD to 32), and commit 18e8c134f4e9 (net: Increase NET_SKB_PAD to 64 bytes) increased it to 64. While first patch was governed by network stack needs, second was more driven by performance issues on current hardware. Real intent was to align data on a cache line boundary. So use max(32, L1_CACHE_BYTES) instead of 64, to be more generic. Remove microblaze and powerpc own NET_SKB_PAD definitions. Thanks to Alexander Duyck and David Miller for their comments. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15net: Fix error in comment on net_device_ops::ndo_get_statsBen Hutchings1-1/+1
ndo_get_stats still returns struct net_device_stats *; there is no struct net_device_stats64. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15inetpeer: RCU conversionEric Dumazet1-0/+1
inetpeer currently uses an AVL tree protected by an rwlock. It's possible to make most lookups use RCU 1) Add a struct rcu_head to struct inet_peer 2) add a lookup_rcu_bh() helper to perform lockless and opportunistic lookup. This is a normal function, not a macro like lookup(). 3) Add a limit to number of links followed by lookup_rcu_bh(). This is needed in case we fall in a loop. 4) add an smp_wmb() in link_to_pool() right before node insert. 5) make unlink_from_pool() use atomic_cmpxchg() to make sure it can take last reference to an inet_peer, since lockless readers could increase refcount, even while we hold peers.lock. 6) Delay struct inet_peer freeing after rcu grace period so that lookup_rcu_bh() cannot crash. 7) inet_getpeer() first attempts lockless lookup. Note this lookup can fail even if target is in AVL tree, but a concurrent writer can let tree in a non correct form. If this attemps fails, lock is taken a regular lookup is performed again. 8) convert peers.lock from rwlock to a spinlock 9) Remove SLAB_HWCACHE_ALIGN when peer_cachep is created, because rcu_head adds 16 bytes on 64bit arches, doubling effective size (64 -> 128 bytes) In a future patch, this is probably possible to revert this part, if rcu field is put in an union to share space with rid, ip_id_count, tcp_ts & tcp_ts_stamp. These fields being manipulated only with refcnt > 0. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15Merge branch 'master' of ↵David S. Miller7-7/+67
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-06-15mac80211: Fix ps-qos network latency handlingJuuso Oikarinen1-4/+1
The ps-qos latency handling is broken. It uses predetermined latency values to select specific dynamic PS timeouts. With common AP configurations, these values overlap with beacon interval and are therefore essentially useless (for network latencies less than the beacon interval, PSM is disabled.) This patch remedies the problem by replacing the predetermined network latency values with one high value (1900ms) which is used to go trigger full psm. For backwards compatibility, the value 2000ms is still mapped to a dynamic ps timeout of 100ms. Currently also the mac80211 internal value for storing user space configured dynamic PSM values is incorrectly in the driver visible ieee80211_conf struct. Move it to the ieee80211_local struct. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-15tcp: unify tcp flag macrosChangli Gao1-13/+11
unify tcp flag macros: TCPHDR_FIN, TCPHDR_SYN, TCPHDR_RST, TCPHDR_PSH, TCPHDR_ACK, TCPHDR_URG, TCPHDR_ECE and TCPHDR_CWR. TCBCB_FLAG_* are replaced with the corresponding TCPHDR_*. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- include/net/tcp.h | 24 ++++++------- net/ipv4/tcp.c | 8 ++-- net/ipv4/tcp_input.c | 2 - net/ipv4/tcp_output.c | 59 ++++++++++++++++----------------- net/netfilter/nf_conntrack_proto_tcp.c | 32 ++++++----------- net/netfilter/xt_TCPMSS.c | 4 -- 6 files changed, 58 insertions(+), 71 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15bridge: use rx_handler_data pointer to store net_bridge_port pointerJiri Pirko2-2/+1
Register net_bridge_port pointer as rx_handler data pointer. As br_port is removed from struct net_device, another netdev priv_flag is added to indicate the device serves as a bridge port. Also rcuized pointers are now correctly dereferenced in br_fdb.c and in netfilter parts. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15macvlan: use rx_handler_data pointer to store macvlan_port pointer V2Jiri Pirko2-2/+1
Register macvlan_port pointer as rx_handler data pointer. As macvlan_port is removed from struct net_device, another netdev priv_flag is added to indicate the device serves as a macvlan port. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15net: add rx_handler data pointerJiri Pirko1-1/+3
Add possibility to register rx_handler data pointer along with a rx_handler. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15netpoll: Add netpoll_tx_runningHerbert Xu1-0/+9
This patch adds the helper netpoll_tx_running for use within ndo_start_xmit. It returns non-zero if ndo_start_xmit is being invoked by netpoll, and zero otherwise. This is currently implemented by simply looking at the hardirq count. This is because for all non-netpoll uses of ndo_start_xmit, IRQs must be enabled while netpoll always disables IRQs before calling ndo_start_xmit. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15netpoll: Allow netpoll_setup/cleanup recursionHerbert Xu1-0/+2
This patch adds the functions __netpoll_setup/__netpoll_cleanup which is designed to be called recursively through ndo_netpoll_seutp. They must be called with RTNL held, and the caller must initialise np->dev and ensure that it has a valid reference count. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15netpoll: Add ndo_netpoll_setupHerbert Xu1-0/+2
This patch adds ndo_netpoll_setup as the initialisation primitive to complement ndo_netpoll_cleanup. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15netpoll: Fix RCU usageHerbert Xu1-5/+8
The use of RCU in netpoll is incorrect in a number of places: 1) The initial setting is lacking a write barrier. 2) The synchronize_rcu is in the wrong place. 3) Read barriers are missing. 4) Some places are even missing rcu_read_lock. 5) npinfo is zeroed after freeing. This patch fixes those issues. As most users are in BH context, this also converts the RCU usage to the BH variant. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15Merge branch 'master' of /repos/git/net-next-2.6Patrick McHardy53-469/+383
Conflicts: include/net/netfilter/xt_rateest.h net/bridge/br_netfilter.c net/netfilter/nf_conntrack_core.c Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-06-15netfilter: xtables: idletimer target implementationLuciano Coelho2-0/+46
This patch implements an idletimer Xtables target that can be used to identify when interfaces have been idle for a certain period of time. Timers are identified by labels and are created when a rule is set with a new label. The rules also take a timeout value (in seconds) as an option. If more than one rule uses the same timer label, the timer will be restarted whenever any of the rules get a hit. One entry for each timer is created in sysfs. This attribute contains the timer remaining for the timer to expire. The attributes are located under the xt_idletimer class: /sys/class/xt_idletimer/timers/<label> When the timer expires, the target module sends a sysfs notification to the userspace, which can then decide what to do (eg. disconnect to save power). Cc: Timo Teras <timo.teras@iki.fi> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-06-14ethtool: Revert incorrect indentation changesBen Hutchings1-20/+20
commit 97f8aefbbfb5aa5c9944e5fa8149f1fdaf71c7b6 "net: fix ethtool coding style errors and warnings" changed the indentation of several macro definitions in ethtool.h. These definitions line up in the diff where there is an extra character at the start of each line, but not in the resulting file. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-14mac80211: Fix circular locking dependency in ARP filter handlingJuuso Oikarinen1-14/+21
There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: Set basic rates while joining ibss networkTeemu Paasikivi1-0/+2
This patch adds support to nl80211 and mac80211 to set basic rates when joining/creating ibss network. Original patch was posted by Johannes Berg on the linux-wireless posting list. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: allow drivers to sleep in ampdu_actionJohannes Berg1-1/+1
Allow drivers to sleep, and indicate this in the documentation. ath9k has some locking I don't understand, so keep it safe and disable BHs in it, all other drivers look fine with the context change. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: remove non-irqsafe aggregation callbacksJohannes Berg1-27/+5
The non-irqsafe aggregation start/stop done callbacks are currently only used by ath9k_htc, and can cause callbacks into the driver again. This might lead to locking issues, which will only get worse as we modify locking. To avoid trouble, remove the non-irqsafe versions and change ath9k_htc to use those instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14netfilter: nfnetlink_log: RCU conversion, part 2Eric Dumazet1-0/+1
- must use atomic_inc_not_zero() in instance_lookup_get() - must use hlist_add_head_rcu() instead of hlist_add_head() - must use hlist_del_rcu() instead of hlist_del() - Introduce NFULNL_COPY_DISABLED to stop lockless reader from using an instance, before we do final instance_put() on it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-06-12net: Enable 64-bit net device statistics on 32-bit architecturesBen Hutchings2-38/+56
Use struct rtnl_link_stats64 as the statistics structure. On 32-bit architectures, insert 32 bits of padding after/before each field of struct net_device_stats to make its layout compatible with struct rtnl_link_stats64. Add an anonymous union in net_device; move stats into the union and add struct rtnl_link_stats64 stats64. Add net_device_ops::ndo_get_stats64, implementations of which will return a pointer to struct rtnl_link_stats64. Drivers that implement this operation must not update the structure asynchronously. Change dev_get_stats() to call ndo_get_stats64 if available, and to return a pointer to struct rtnl_link_stats64. Change callers of dev_get_stats() accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11pkt_sched: gen_kill_estimator() rcu fixesEric Dumazet2-0/+3
gen_kill_estimator() API is incomplete or not well documented, since caller should make sure an RCU grace period is respected before freeing stats_lock. This was partially addressed in commit 5d944c640b4 (gen_estimator: deadlock fix), but same problem exist for all gen_kill_estimator() users, if lock they use is not already RCU protected. A code review shows xt_RATEEST.c, act_api.c, act_police.c have this problem. Other are ok because they use qdisc lock, already RCU protected. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11Merge branch 'master' of ↵David S. Miller1-1/+4
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-06-11Merge branch 'master' of ↵David S. Miller4-204/+112
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/wl12xx/wl1271.h drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-06-10net-next: remove useless union keywordChangli Gao4-14/+8
remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 16:44:39 +0000