summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2019-02-14errqueue.h: Include time_types.hDeepa Dinamani1-0/+1
Now that we have a separate header for struct __kernel_timespec, include it directly without relying on userspace to do it. Reported-by: Ran Rozenstein <ranro@mellanox.com> Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14time: Add time_types.hDeepa Dinamani2-35/+41
sys/time.h is the mandated include for many time related defines. However, linux/time.h overlaps sys/time.h significantly and this makes including both from userspace or one from the other impossible. This also means that userspace can get away with including sys/time.h whenever it needs linux/time.h and this is what's been happening in the user world usually. But, we have new data types that we plan to use in the uapi time interfaces also defined in the linux/time.h. But, we are unable to use these types when sys/time.h is included. Hence, move the new types to a new header, time_types.h. We intend to eventually have all the uapi defines that the kernel uses defined in this header. Note that the plan is to replace uapi interfaces with timeval to use __kernel_old_timeval, timespec to use __kernel_old_timespec etc. Reported-by: Ran Rozenstein <ranro@mellanox.com> Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13Merge tag 'batadv-next-for-davem-20190213' of ↵David S. Miller2-6/+186
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - fix memory leak in in batadv_dat_put_dhcp, by Martin Weinelt - fix typo, by Sven Eckelmann - netlink restructuring patch series (part 2), by Sven Eckelmann (19 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mm: add dma_addr_t to struct pageJesper Dangaard Brouer1-0/+7
The page_pool API is using page->private to store DMA addresses. As pointed out by David Miller we can't use that on 32-bit architectures with 64-bit DMA This patch adds a new dma_addr_t struct to allow storing DMA addresses Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13flow_offload: fix block statsJohn Hurley1-3/+3
With the introduction of flow_stats_update(), drivers now update the stats fields of the passed tc_cls_flower_offload struct, rather than call tcf_exts_stats_update() directly to update the stats of offloaded TC flower rules. However, if multiple qdiscs are registered to a TC shared block and a flower rule is applied, then, when getting stats for the rule, multiple callbacks may be made. Take this into consideration by modifying flow_stats_update to gather the stats from all callbacks. Currently, the values in tc_cls_flower_offload only account for the last stats callback in the list. Fixes: 3b1903ef97c0 ("flow_offload: add statistics retrieval infrastructure and use it") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: phy: Add generic support for 2.5GBaseT and 5GBaseTMaxime Chevallier1-0/+16
The 802.3bz specification, based on previous by the NBASET alliance, defines the 2.5GBaseT and 5GBaseT link modes for ethernet traffic on cat5e, cat6 and cat7 cables. These mode integrate with the already defined C45 MDIO PMA/PMD registers set that added 10G support, by defining some previously reserved bits, and adding a new register (2.5G/5G Extended abilities). This commit adds the required definitions in include/uapi/linux/mdio.h to support these modes, and detect when a link-partner advertises them. It also adds support for these mode in the generic C45 PHY infrastructure. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: phy: Extract genphy_c45_pma_read_abilities from marvell10gMaxime Chevallier1-0/+1
Marvell 10G PHY driver has a generic way of initializing the supported link modes by reading the PHY's C45 PMA abilities. This can be made generic, since these registers are part of the 802.3 specifications. This commit extracts the config_init link_mode initialization code from marvell10g and uses it to introduce the genphy_c45_pma_read_abilities function. Only PMA modes are read, it's still up to the caller to set the Pause parameters. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: phy: Move of_set_phy_eee_broken to phy-core.cMaxime Chevallier1-0/+1
Since of_set_phy_supported was moved to phy-core.c, we can also move of_set_phy_eee_broken to the same location, so that we have all OF functions in the same place. This patch doesn't intend to introduce any change in behaviour. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: phy: Mask-out non-compatible modes when setting the max-speedMaxime Chevallier1-0/+1
When setting a PHY's max speed using either the max-speed DT property or ethtool, we should mask-out all non-compatible modes according to the settings table, instead of just the 10/100BASET modes. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: add flags to Qdisc class ops structVlad Buslov1-0/+8
Extend Qdisc_class_ops with flags. Create enum to hold possible class ops flag values. Add first class ops flags value QDISC_CLASS_OPS_DOIT_UNLOCKED to indicate that class ops functions can be called without taking rtnl lock. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: extend proto ops to support unlocked classifiersVlad Buslov2-6/+13
Add 'rtnl_held' flag to tcf proto change, delete, destroy, dump, walk functions to track rtnl lock status. Extend users of these function in cls API to propagate rtnl lock status to them. This allows classifiers to obtain rtnl lock when necessary and to pass rtnl lock status to extensions and driver offload callbacks. Add flags field to tcf proto ops. Add flag value to indicate that classifier doesn't require rtnl lock. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: extend proto ops with 'put' callbackVlad Buslov1-0/+1
Add optional tp->ops->put() API to be implemented for filter reference counting. This new function is called by cls API to release filter reference for filters returned by tp->ops->change() or tp->ops->get() functions. Implement tfilter_put() helper to call tp->ops->put() only for classifiers that implement it. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: track rtnl lock status when validating extensionsVlad Buslov1-1/+1
Actions API is already updated to not rely on rtnl lock for synchronization. However, it need to be provided with rtnl status when called from classifiers API in order to be able to correctly release the lock when loading kernel module. Extend extension validation function with 'rtnl_held' flag which is passed to actions API. Add new 'rtnl_held' parameter to tcf_exts_validate() in cls API. No classifier is currently updated to support unlocked execution, so pass hardcoded 'true' flag parameter value. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: prevent insertion of new classifiers during chain flushVlad Buslov1-0/+1
Extend tcf_chain with 'flushing' flag. Use the flag to prevent insertion of new classifier instances when chain flushing is in progress in order to prevent resource leak when tcf_proto is created by unlocked users concurrently. Return EAGAIN error from tcf_chain_tp_insert_unique() to restart tc_new_tfilter() and lookup the chain/proto again. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: refactor tp insert/delete for concurrent executionVlad Buslov1-0/+18
Implement unique insertion function to atomically attach tcf_proto to chain after verifying that no other tcf proto with specified priority exists. Implement delete function that verifies that tp is actually empty before deleting it. Use these functions to refactor cls API to account for concurrent tp and rule update instead of relying on rtnl lock. Add new 'deleting' flag to tcf proto. Use it to restart search when iterating over tp's on chain to prevent accessing potentially inval tp->next pointer. Extend tcf proto with spinlock that is intended to be used to protect its data from concurrent modification instead of relying on rtnl mutex. Use it to protect 'deleting' flag. Add lockdep macros to validate that lock is held when accessing protected fields. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: traverse classifiers in chain with tcf_get_next_proto()Vlad Buslov1-0/+2
All users of chain->filters_chain rely on rtnl lock and assume that no new classifier instances are added when traversing the list. Use tcf_get_next_proto() to traverse filters list without relying on rtnl mutex. This function iterates over classifiers by taking reference to current iterator classifier only and doesn't assume external synchronization of filters list. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: introduce reference counting for tcf_protoVlad Buslov1-0/+1
In order to remove dependency on rtnl lock and allow concurrent tcf_proto modification, extend tcf_proto with reference counter. Implement helper get/put functions for tcf proto and use them to modify cls API to always take reference to tcf_proto while using it. Only release reference to parent chain after releasing last reference to tp. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: protect filter_chain list with filter_chain_lock mutexVlad Buslov1-0/+17
Extend tcf_chain with new filter_chain_lock mutex. Always lock the chain when accessing filter_chain list, instead of relying on rtnl lock. Dereference filter_chain with tcf_chain_dereference() lockdep macro to verify that all users of chain_list have the lock taken. Rearrange tp insert/remove code in tc_new_tfilter/tc_del_tfilter to execute all necessary code while holding chain lock in order to prevent invalidation of chain_info structure by potential concurrent change. This also serializes calls to tcf_chain0_head_change(), which allows head change callbacks to rely on filter_chain_lock for synchronization instead of rtnl mutex. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: traverse chains in block with tcf_get_next_chain()Vlad Buslov1-0/+2
All users of block->chain_list rely on rtnl lock and assume that no new chains are added when traversing the list. Use tcf_get_next_chain() to traverse chain list without relying on rtnl mutex. This function iterates over chains by taking reference to current iterator chain only and doesn't assume external synchronization of chain list. Don't take reference to all chains in block when flushing and use tcf_get_next_chain() to safely iterate over chain list instead. Remove tcf_block_put_all_chains() that is no longer used. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: sched: protect block state with mutexVlad Buslov1-0/+5
Currently, tcf_block doesn't use any synchronization mechanisms to protect critical sections that manage lifetime of its chains. block->chain_list and multiple variables in tcf_chain that control its lifetime assume external synchronization provided by global rtnl lock. Converting chain reference counting to atomic reference counters is not possible because cls API uses multiple counters and flags to control chain lifetime, so all of them must be synchronized in chain get/put code. Use single per-block lock to protect block data and manage lifetime of all chains on the block. Always take block->lock when accessing chain_list. Chain get and put modify chain lifetime-management data and parent block's chain_list, so take the lock in these functions. Verify block->lock state with assertions in functions that expect to be called with the lock taken and are called from multiple places. Take block->lock when accessing filter_chain_list. In order to allow parallel update of rules on single block, move all calls to classifiers outside of critical sections protected by new block->lock. Rearrange chain get and put functions code to only access protected chain data while holding block lock: - Rearrange code to only access chain reference counter and chain action reference counter while holding block lock. - Extract code that requires block->lock from tcf_chain_destroy() into standalone tcf_chain_destroy() function that is called by __tcf_chain_put() in same critical section that changes chain reference counters. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp_qoriq: fix register memory mapYangbo Lu1-9/+9
The 1588 timer on eTSEC Ethernet controller uses different register memory map with DPAA Ethernet controller. Now the new ENETC Ethernet controller uses same reigster memory map with DPAA. To support ENETC, let's use register memory map of DPAA/ENETC in default. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp_qoriq: add little enadian supportYangbo Lu1-6/+15
There is QorIQ 1588 timer IP block on the new ENETC Ethernet controller. However it uses little endian mode which is different with before. This patch is to add little endian support for the driver by using "little-endian" dts node property. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp_qoriq: convert to use ptp_qoriq_init/freeYangbo Lu1-0/+3
Moved QorIQ PTP clock initialization/free into new functions ptp_qoriq_init()/ptp_qoriq_free(). These functions could also be reused by ENETC PTP drvier which is a PCI driver for same 1588 timer IP block. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp_qoriq: make ptp operations globalYangbo Lu1-0/+9
This patch is to make functions of ptp operations global, so that ENETC PTP driver which is a PCI driver for same 1588 timer IP block could reuse them. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp_qoriq: make structure/function names more consistentYangbo Lu1-7/+7
Strings containing "ptp_qoriq" or "qoriq_ptp" which were used for structure/function names were complained by users. Let's just use the unique "ptp_qoriq" to make these names more consistent. This patch is just to unify the names using "ptp_qoriq". It hasn't changed any functions. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net/skbuff: fix up kernel-doc placementBrian Norris1-6/+6
There are several skb_* functions where the locked and unlocked functions are confusingly documented. For several of them, the kernel-doc for the unlocked version is placed above the locked version, which to the casual reader makes it seems like the locked version "takes no locks and you must therefore hold required locks before calling it." One can see, for example, that this link claims to document skb_queue_head(), while instead describing __skb_queue_head(). https://www.kernel.org/doc/html/latest/networking/kapi.html#c.skb_queue_head The correct documentation for skb_queue_head() is also included further down the page. This diff tested via: $ scripts/kernel-doc -rst include/linux/skbuff.h net/core/skbuff.c No new warnings were seen, and the output makes a little more sense. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: phylink: add phylink_init_eee() helperRussell King1-0/+1
Provide phylink_init_eee() to allow MAC drivers to initialise PHY EEE from within the ethtool set_eee() method. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12Revert "devlink: Add a generic wake_on_lan port parameter"Vasundhara Volam1-8/+0
This reverts commit b639583f9e36d044ac1b13090ae812266992cbac. As per discussion with Jakub Kicinski and Michal Kubecek, this will be better addressed by soon-too-come ethtool netlink API with additional indication that given configuration request is supposed to be persisted. Also, remove the parameter support from bnxt_en driver. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Michal Kubecek <mkubecek@suse.cz> Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11flow_offload: Fix flow action infrastructureEli Britstein1-1/+1
Implementation of macro "flow_action_for_each" introduced in commit e3ab786b42535 ("flow_offload: add flow action infrastructure") and used in commit 738678817573c ("drivers: net: use flow action infrastructure") iterated the first item twice and did not reach the last one. Fix it. Fixes: e3ab786b42535 ("flow_offload: add flow action infrastructure") Fixes: 738678817573c ("drivers: net: use flow action infrastructure") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11devlink: add a generic board.manufacture version nameJakub Kicinski1-0/+2
At Jiri's suggestion add a generic "board.manufacture" version identifier. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: phy: add register modifying helpers returning 1 on changeHeiner Kallweit1-2/+10
When modifying registers there are scenarios where we need to know whether the register content actually changed. This patch adds new helpers to not break users of the current ones, phy_modify() etc. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: Change TCA_ACT_* to TCA_ID_* to match that of TCA_ID_POLICEEli Cohen10-12/+12
Modify the kernel users of the TCA_ACT_* macros to use TCA_ID_*. For example, use TCA_ID_GACT instead of TCA_ACT_GACT. This will align with TCA_ID_POLICE and also differentiates these identifier, used in struct tc_action_ops type field, from other macros starting with TCA_ACT_. To make things clearer, we name the enum defining the TCA_ID_* identifiers and also change the "type" field of struct tc_action to id. Signed-off-by: Eli Cohen <eli@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: Move all TC actions identifiers to one placeEli Cohen15-29/+40
Move all the TC identifiers to one place, to the same enum that defines the identifier of police action. This makes it easier choose numbers for new actions since they are now defined in one place. We preserve the original values for binary compatibility. New IDs should be added inside the enum. Signed-off-by: Eli Cohen <eli@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: phy: Add support for asking the PHY its abilitiesAndrew Lunn1-0/+6
Add support for runtime determination of what the PHY supports, by adding a new function to the phy driver. The get_features call should set the phydev->supported member with the features the PHY supports. It is only called if phydrv->features is NULL. This requires minor changes to pause. The PHY driver should not set pause abilities, except for when it has odd cause capabilities, e.g. pause cannot be disabled. With this change, phydev->supported already contains the drivers abilities, including pause. So rather than considering phydrv->features, look at the phydev->supported, and enable pause if neither of the pause bits are already set. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: fixed small checkpatch complaint in one comment] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09batman-adv: Add throughput_override hardif genl configurationSven Eckelmann1-0/+8
The B.A.T.M.A.N. V implementation tries to estimate the link throughput of an interface to an originator using different automatic methods. It is still possible to overwrite it the link throughput for all reachable originators via this interface. The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_THROUGHPUT_OVERRIDE attribute. The used unit is in 100 Kbit/s. If the value is set to 0 then batman-adv will try to estimate the throughput by itself. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add elp_interval hardif genl configurationSven Eckelmann1-0/+6
The ELP packets are transmitted every elp_interval milliseconds on an slave/hard-interface. This value can be changed using the configuration interface. The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ELP_INTERVAL attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add orig_interval mesh genl configurationSven Eckelmann1-0/+6
The OGM packets are transmitted every orig_interval milliseconds. This value can be changed using the configuration interface. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ORIG_INTERVAL attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add network_coding mesh genl configurationSven Eckelmann1-0/+7
The mesh interface can use (in an homogeneous mesh) network coding, a mechanism that aims to increase the overall network throughput by fusing multiple packets in one transmission. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_NETWORK_CODING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add multicast forceflood mesh genl configurationSven Eckelmann1-0/+9
The mesh interface can optimize the flooding of multicast packets based on the content of the global translation tables. To disable this behavior and use the broadcast-like flooding of the packets, forceflood has to be enabled. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED attribute. Setting the u8 to zero will disable this feature (allowing multicast optimizations) and setting it to something else is enabling this feature (forcing simple flooding). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add log_level mesh genl configurationSven Eckelmann1-0/+6
In contrast to other modules, batman-adv allows to set the debug message verbosity per mesh/soft-interface and not per module (via modparam). The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add hop_penalty mesh genl configurationSven Eckelmann1-0/+6
The TQ (B.A.T.M.A.N. IV) and throughput values (B.A.T.M.A.N. V) are reduced when they are forwarded. One of the reductions is the penalty for traversing an additional hop. This hop_penalty (0-255) defines the percentage of reduction (0-100%). The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u8 BATADV_ATTR_HOP_PENALTY attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add gateway mesh genl configurationSven Eckelmann1-0/+40
The mesh/soft-interface can optimize the handling of DHCP packets. Instead of flooding them through the whole mesh, it can be forwarded as unicast to a specific gateway server. The originator which injects the packets in the mesh has to select (based on sel_class thresholds) a responsible gateway server. This is done by switching this originator to the gw_mode client. The servers announce their forwarding bandwidth (download/upload) when the gw_mode server was selected. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the attributes: * u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server) * u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_SEL_CLASS Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add fragmentation mesh genl configurationSven Eckelmann1-0/+7
The mesh interface can fragment unicast packets when the packet size exceeds the outgoing slave/hard-interface MTU. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_FRAGMENTATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add distributed_arp_table mesh genl configurationSven Eckelmann1-0/+8
The mesh interface can use a distributed hash table to answer ARP requests without flooding the request through the whole mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add bridge_loop_avoidance mesh genl configurationSven Eckelmann1-0/+7
The mesh interface can try to detect loops in the same mesh caused by (indirectly) bridged mesh/soft-interfaces of different nodes. Some of the loops can also be resolved without breaking the mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add bonding mesh genl configurationSven Eckelmann1-0/+6
The mesh interface can use multiple slave/hard-interface ports at the same time to transport the traffic to other nodes. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BONDING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add ap_isolation mesh/vlan genl configurationSven Eckelmann1-0/+19
The mesh interface can drop messages between clients to implement a mesh-wide AP isolation. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the configuration of this feature using the BATADV_ATTR_AP_ISOLATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. This feature also requires that skbuff which should be handled as isolated are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK and BATADV_ATTR_ISOLATION_MASK. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add aggregated_ogms mesh genl configurationSven Eckelmann1-0/+6
The mesh interface can delay OGM messages to aggregate different ogms together in a single OGM packet. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Prepare framework for vlan genl configSven Eckelmann1-0/+17
The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. Beside the mesh/soft-interface specific configuration, the VLANs on top of the mesh/soft-interface have configuration settings. The genl interface reflects this by allowing to get/set it using the vlan specific commands BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN. The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_VLAN command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Prepare framework for hardif genl configSven Eckelmann1-2/+14
The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. Beside the mesh/soft-interface specific configuration, the slave/hard-interface have B.A.T.M.A.N. V specific configuration settings. The genl interface reflects this by allowing to get/set it using the hard-interface specific commands. The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is reused as get command because it already allow sto dump the content of other information from the slave/hard-interface which are not yet configuration specific. The set command BATADV_CMD_SET_HARDIF will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 04:01:28 +0000