summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2011-04-04pkt_sched: QFQ - quick fair queue schedulerstephen hemminger1-0/+15
This is an implementation of the Quick Fair Queue scheduler developed by Fabio Checconi. The same algorithm is already implemented in ipfw in FreeBSD. Fabio had an earlier version developed on Linux, I just cleaned it up. Thanks to Eric Dumazet for testing this under load. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04Merge branch 'master' of ↵David S. Miller4-3/+7
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-04-02net: Call netdev_features_change() from netdev_update_features()Michał Mirosław1-0/+1
Issue FEAT_CHANGE notification when features are changed by netdev_update_features(). This will allow changes made by extra constraints on e.g. MTU change to be properly propagated like changes via ethtool. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01sctp: fix auth_hmacs field's length of struct sctp_cookieWei Yongjun1-1/+1
auth_hmacs field of struct sctp_cookie is used for store Requested HMAC Algorithm Parameter, and each HMAC Identifier is 2 bytes, so the length should be: SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUMMichał Mirosław1-2/+2
dev_ethtool_get_rx_csum() won't report rx checksumming when it's not changeable and driver is converted to hw_features and friends. Fix this. (dev->hw_features & NETIF_F_RXCSUM) check is dropped - if the ethtool_ops->get_rx_csum is set, then driver is not coverted, yet. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01usbnet: use eth%d name for known ethernet devicesArnd Bergmann1-0/+2
The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: Arnd Bergmann <arnd.bergmann@linaro.org> Tested-by: Andy Green <andy.green@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01Merge branch 'master' of ↵David S. Miller1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-03-31net: Order ports in same order as addresses in flow objects.David S. Miller1-3/+3
For consistency. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31ipv4: Use flowi4_init_output() in net/route.hDavid S. Miller1-36/+24
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31net: Add helper flowi4_init_output().David S. Miller1-0/+21
On-stack initialization via assignment of flow structures are expensive because GCC emits a memset() to clear the entire structure out no matter what. Add a helper for ipv4 output flow key setup which we can use to avoid the memset. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30Merge branch 'master' of ↵David S. Miller6-14/+32
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-03-30connector: convert to synchronous netlink message processingPatrick McHardy1-13/+3
Commits 01a16b21 (netlink: kill eff_cap from struct netlink_skb_parms) and c53fa1ed (netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms) removed some members from struct netlink_skb_parms that depend on the current context, all netlink users are now required to do synchronous message processing. connector however queues received messages and processes them in a work queue, which is not valid anymore. This patch converts connector to do synchronous message processing by invoking the registered callback handler directly from the netlink receive function. In order to avoid invoking the callback with connector locks held, a reference count is added to struct cn_callback_entry, the reference is taken when finding a matching callback entry on the device's queue_list and released after the callback handler has been invoked. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30atm/solos-pci: Don't flap VCs when carrier state changesPhilip A. Prindeville1-0/+1
Don't flap VCs when carrier state changes; higher-level protocols can detect loss of connectivity and act accordingly. This is more consistent with how other network interfaces work. We no longer use release_vccs() so we can delete it. release_vccs() was duplicated from net/atm/common.c; make the corresponding function exported, since other code duplicates it and could leverage it if it were public. Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30net/usb: Ethernet quirks for the LG-VL600 4G modemAndrzej Zaborowski1-0/+3
This adds a driver for the CDC Ethernet part of this modem. The device's ID is blacklisted in cdc_ether.c and is white-listed in this new driver because of the quirks needed to make it useful. The modem's firmware exposes a CDC ACM port for modem control and a CDC Ethernet port for network data. The descriptors look fine but both ports actually are some sort of multiplexers requiring non- standard headers added/removed from every packet or they get ignored. All information is based on a usb traffic log from a Windows machine. On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps. Userspace scripts are required to talk to the CDC ACM port. Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30net: gre: provide multicast mappings for ipv4 and ipv6Timo Teräs2-0/+24
My commit 6d55cb91a0020ac0 (gre: fix hard header destination address checking) broke multicast. The reason is that ip_gre used to get ipgre_header() calls with zero destination if we have NOARP or multicast destination. Instead the actual target was decided at ipgre_tunnel_xmit() time based on per-protocol dissection. Instead of allowing the "abuse" of ->header() calls with invalid destination, this creates multicast mappings for ip_gre. This also fixes "ip neigh show nud noarp" to display the proper multicast mappings used by the gre device. Reported-by: Doug Kehn <rdkehn@yahoo.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Doug Kehn <rdkehn@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-29net: Fix warnings caused by MAX_SKB_FRAGS change.David S. Miller1-1/+1
After commit a715dea3c8e9ef2771c534e05ee1d36f65987e64 ("net: Always allocate at least 16 skb frags regardless of page size"), the value of MAX_SKB_FRAGS can now take on either an "unsigned long" or an "int" value. This causes warnings like: net/packet/af_packet.c: In function ‘tpacket_fill_skb’: net/packet/af_packet.c:948: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘int’ Fix by forcing the constant to be unsigned long, otherwise we have a situation where the type of a system wide constant is variable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30genirq: Remove obsolete commentThomas Gleixner1-7/+0
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-30genirq: Remove now obsolete set_irq_wake()Thomas Gleixner1-8/+0
Missed that one in the big compat remval patch Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29Merge branch 'for-linus' of ↵Linus Torvalds2-0/+63
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
2011-03-29Merge branch 'frv' of ↵Linus Torvalds1-0/+32
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv * 'frv' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv: FRV: Use generic show_interrupts() FRV: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end FRV: Do some cleanups FRV: Missing node arg in alloc_thread_info_node() macro NOMMU: implement access_remote_vm NOMMU: support SMP dynamic percpu_alloc NOMMU: percpu should use is_vmalloc_addr().
2011-03-29Merge branch 'irq-final-for-linus-v2' of ↵Linus Torvalds2-180/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits) gpio: ab8500: Mark broken genirq: Remove move_*irq leftovers genirq: Remove compat code drivers: Final irq namespace conversion mn10300: Use generic show_interrupts() mn10300: Cleanup irq_desc access mn10300: Convert genirq namespace frv: Use generic show_interrupts() frv: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end m68k: Convert irq function namespace xen: Use new irq_move functions xen: Cleanup genirq namespace unicore32: Use generic show_interrupts() ...
2011-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds6-7/+43
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) xfrm: Restrict extended sequence numbers to esp xfrm: Check for esn buffer len in xfrm_new_ae xfrm: Assign esn pointers when cloning a state xfrm: Move the test on replay window size into the replay check functions netdev: bfin_mac: document TE setting in RMII modes drivers net: Fix declaration ordering in inline functions. cxgb3: Apply interrupt coalescing settings to all queues net: Always allocate at least 16 skb frags regardless of page size ipv4: Don't ip_rt_put() an error pointer in RAW sockets. net: fix ethtool->set_flags not intended -EINVAL return value mlx4_en: Fix loss of promiscuity tg3: Fix inline keyword usage tg3: use <linux/io.h> and <linux/uaccess.h> instead <asm/io.h> and <asm/uaccess.h> net: use CHECKSUM_NONE instead of magic number Net / jme: Do not use legacy PCI power management myri10ge: small rx_done refactoring bridge: notify applications if address of bridge device changes ipv4: Fix IP timestamp option (IPOPT_TS_PRESPEC) handling in ip_options_echo() can: c_can: Fix tx_bytes accounting can: c_can_platform: fix irq check in probe ...
2011-03-29genirq: Remove move_*irq leftoversThomas Gleixner1-4/+0
All users converted to new interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29genirq: Remove compat codeThomas Gleixner2-176/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28xfrm: Assign esn pointers when cloning a stateSteffen Klassert1-0/+22
When we clone a xfrm state we have to assign the replay_esn and the preplay_esn pointers to the state if we use the new replay detection method. To this end, we add a xfrm_replay_clone() function that allocates memory for the replay detection and takes over the necessary values from the original state. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-28net: Always allocate at least 16 skb frags regardless of page sizeAnton Blanchard1-1/+7
When analysing performance of the cxgb3 on a ppc64 box I noticed that we weren't doing much GRO merging. It turns out we are limited by the number of SKB frags: #define MAX_SKB_FRAGS (65536/PAGE_SIZE + 2) With a 4kB page size we have 18 frags, but with a 64kB page size we only have 3 frags. I ran a single stream TCP bandwidth test to compare the performance of Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-28Merge branches 'irq-cleanup-for-linus' and 'irq-fixes-for-linus' of ↵Linus Torvalds1-4/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: vlynq: Convert irq functions * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq; Fix cleanup fallout genirq: Fix typo and remove unused variable genirq: Fix new kernel-doc warnings genirq: Add setter for AFFINITY_SET in irq_data state genirq: Provide setter inline for IRQD_IRQ_INPROGRESS genirq: Remove handle_IRQ_event arm: Ns9xxx: Remove private irq flow handler powerpc: cell: Use the core flow handler genirq: Provide edge_eoi flow handler genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_data genirq: Split irq_set_affinity() so it can be called with lock held. genirq: Add chip flag for restricting cpu_on/offline calls genirq: Add chip hooks for taking CPUs on/off line. genirq: Add irq disabled flag to irq_data state genirq: Reserve the irq when calling irq_set_chip()
2011-03-28Merge branch 'for-linus-unmerged' of ↵Linus Torvalds2-0/+669
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (45 commits) Btrfs: fix __btrfs_map_block on 32 bit machines btrfs: fix possible deadlock by clearing __GFP_FS flag btrfs: check link counter overflow in link(2) btrfs: don't mess with i_nlink of unlocked inode in rename() Btrfs: check return value of btrfs_alloc_path() Btrfs: fix OOPS of empty filesystem after balance Btrfs: fix memory leak of empty filesystem after balance Btrfs: fix return value of setflags ioctl Btrfs: fix uncheck memory allocations btrfs: make inode ref log recovery faster Btrfs: add btrfs_trim_fs() to handle FITRIM Btrfs: adjust btrfs_discard_extent() return errors and trimmed bytes Btrfs: make btrfs_map_block() return entire free extent for each device of RAID0/1/10/DUP Btrfs: make update_reserved_bytes() public btrfs: return EXDEV when linking from different subvolumes Btrfs: Per file/directory controls for COW and compression Btrfs: add datacow flag in inode flag btrfs: use GFP_NOFS instead of GFP_KERNEL Btrfs: check return value of read_tree_block() btrfs: properly access unaligned checksum buffer ... Fix up trivial conflicts in fs/btrfs/volumes.c due to plug removal in the block layer.
2011-03-28Merge branch 'for_linus' of ↵Linus Torvalds2-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (81 commits) xo15-ebook: Remove device.wakeup_count ips: use interruptible waits in ips-monitor acer-wmi: does not poll device status when WMI event is available acer-wmi: does not set persistence state by rfkill_init_sw_state platform-drivers: x86: fix common misspellings acer-wmi: use pr_<level> for messages asus-wmi: potential NULL dereference in show_call() asus-wmi: signedness bug in read_brightness() platform-driver-x86: samsung-laptop: make dmi_check_cb to return 1 instead of 0 platform-driver-x86: fix wrong merge for compal-laptop.c msi-laptop: use pr_<level> for messages Platform: add Samsung Laptop platform driver acer-wmi: Fix WMI ID acer-wmi: deactive mail led when power off msi-laptop: send out touchpad on/off key acer-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE platform-driver-x86: intel_mid_thermal: fix unterminated platform_device_id table sony-laptop: potential null dereference sony-laptop: handle allocation failures sony-laptop: return negative on failure in sony_nc_add() ...
2011-03-28Merge branch 'for-torvalds' of ↵Linus Torvalds2-0/+62
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: configure board for the TPS61052 regulator v2 mach-ux500: provide ab8500 init vector mach-ux500: board support for AB8500 GPIO driver gpio: driver for 42 AB8500 GPIO pins
2011-03-28genirq: Fix new kernel-doc warningsRandy Dunlap1-1/+1
Fix new irq-related kernel-doc warnings in 2.6.38: Warning(kernel/irq/manage.c:149): No description found for parameter 'mask' Warning(kernel/irq/manage.c:149): Excess function parameter 'cpumask' description in 'irq_set_affinity' Warning(include/linux/irq.h:161): No description found for parameter 'state_use_accessors' Warning(include/linux/irq.h:161): Excess struct/union/enum/typedef member 'state_use_accessor' description in 'irq_data' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <20110318093356.b939558d.randy.dunlap@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Add setter for AFFINITY_SET in irq_data stateThomas Gleixner1-0/+5
Some archs want to prevent the default affinity being set on their chips in the reqeust_irq() path. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Provide setter inline for IRQD_IRQ_INPROGRESSThomas Gleixner1-0/+15
Special function for demultiplexing handlers which can be disabled via disable_irq(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Remove handle_IRQ_eventThomas Gleixner1-3/+0
Last user gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Provide edge_eoi flow handlerThomas Gleixner1-0/+1
This is a replacment for the cell flow handler which is in the way of cleanups. Must be selected to avoid general bloat. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_dataThomas Gleixner1-2/+15
We really need these flags for some of the interrupt chips. Move it from internal state to irq_data and provide proper accessors. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Daney <ddaney@caviumnetworks.com>
2011-03-28Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds1-1/+0
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Ensure that rpc_release_resources_task() can be called twice. NFS: Don't leak RPC clients in NFSv4 secinfo negotiation NFS: Fix a hang in the writeback path
2011-03-28NOMMU: support SMP dynamic percpu_allocGraf Yang1-0/+32
The percpu code requires more functions to be implemented in the mm core which nommu currently does not provide. So add inline implementations since these are largely meaningless on nommu systems. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org>
2011-03-28sony-laptop: ignore hard switch rfkill events (SPIC)Mattia Dongili1-0/+1
There is not much use for these events in userspace and handling the events themselves seems to get in the way of the actual activation of the rf devices. The SNC device doesn't expose them already. https://bugzilla.kernel.org/show_bug.cgi?id=15303 Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: add camera keysCorentin Chary1-0/+7
These keys are supposed to be handled by any software using the camera (like webKam or cheese...). They can also be used to actually move the camera when possible. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28Btrfs: add datacow flag in inode flagliubo1-0/+2
For datacow control, the corresponding inode flags are needed. This is for btrfs use. v1->v2: Change FS_COW_FL to another bit due to conflict with the upstream e2fsprogs Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-28Btrfs: add initial tracepoint support for btrfsliubo1-0/+667
Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-28gpio: driver for 42 AB8500 GPIO pinsBibek Basu2-0/+62
To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> [Renamed header file as per MFD structure] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-27net: fix ethtool->set_flags not intended -EINVAL return valueStanislaw Gruszka1-0/+1
After commit d5dbda23804156ae6f35025ade5307a49d1db6d7 "ethtool: Add support for vlan accleration.", drivers that have NETIF_F_HW_VLAN_TX, and/or NETIF_F_HW_VLAN_RX feature, but do not allow enable/disable vlan acceleration via ethtool set_flags, always return -EINVAL from that function. Fix by returning -EINVAL only if requested features do not match current settings and can not be changed by driver. Change any driver that define ethtool->set_flags to use ethtool_invalid_flags() to avoid similar problems in the future (also on drivers that do not have the problem). Tested with modified (to reproduce this bug) myri10ge driver. Cc: stable@kernel.org # 2.6.37+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27can: make struct proto constOliver Hartkopp1-4/+5
can_ioctl is the only reason for struct proto to be non-const. script/check-patch.pl suggests struct proto be const. Setting the reference to the common can_ioctl() in all CAN protocols directly removes the need to make the struct proto writable in af_can.c Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27Merge branch 'for-linus' of ↵Linus Torvalds5-4/+67
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Add MODULE_DEVICE_TABLE to max8997 and max8998 regulator: fix tps6524x section mismatch regulator: Remove more wm831x-specific IRQ operations regulator: add ab8500 enable and raise time delays regulator: provide consumer interface for fall/rise time regulator: add set_voltage_time_sel infrastructure regulator: initialization for ab8500 regulators regulator: add support for USB voltage regulator regulator: switch the ab3100 to use enable_time() Regulator: add suspend-finish API for regulator core. regulator: fix typo in Kconfig regulator: Convert WM831x regulators to genirq regulator: If we fail when setting up a supply say which supply
2011-03-27Merge branch 'for-linus' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix yet another race in disconnection ALSA: asihpi - Update verbose debug print macros ALSA: asihpi - Improve non-busmaster adapter operation ALSA: asihpi - Support single-rate no-SRC cards ALSA: HDA: New AD1984A model for Dell Precision R5500 ALSA: vmalloc buffers should use normal mmap ALSA: hda - Fix SPDIF out regression on ALC889 ALSA: usb-audio - Support for Boss JS-8 Jam Station ALSA: usb-audio: add Cakewalk UM-1G support sound/oss/opl3: validate voice and channel indexes sound/oss: remove offset from load_patch callbacks
2011-03-27Merge branch 'for-next' of ↵Linus Torvalds3-11/+44
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Clean up max8997 IRQ namespace mfd: Fold irq_set_chip/irq_set_handler mfd: Cleanup irq namespace mfd: twl6030: Cleanup interrupt handling mfd: twl4030: Cleanup interrupt handling mfd: mx8925: Remove irq_desc leftovers mfd: htc-i2cpld: Cleanup interrupt handling mfd: htc-egpio: Cleanup interrupt handling mfd: ezx-pcap: Remvove open coded irq handling mfd: 88pm860x: Remove unused irq_desc leftovers mfd: asic3: Cleanup irq handling mfd: Select MFD_CORE if TPS6105X driver is configured mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge mfd: Add MAX8997/8966 IRQ control mfd: Constify i2c_device_id tables mfd: OLPC: Clean up names to match what OLPC actually uses mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it
2011-03-27Merge branch 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds4-8/+41
* 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block: (122 commits) cciss: fix lost command issue drbd: need include for bitops functions declarations Revert "cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation" cciss: fix missed command status value CMD_UNABORTABLE cciss: remove unnecessary casts cciss: Mask off error bits of c->busaddr in cmd_special_free when calling pci_free_consistent cciss: Inform controller we are using 32-bit tags. cciss: hoist tag masking out of loop cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation cciss: export resettable host attribute drbd: drop code present under #ifdef which is relevant to 2.6.28 and below drbd: Fixed handling of read errors on a 'VerifyS' node drbd: Fixed handling of read errors on a 'VerifyT' node drbd: Implemented real timeout checking for request processing time drbd: Remove unused function atodb_endio() drbd: improve log message if received sector offset exceeds local capacity drbd: kill dead code drbd: don't BUG_ON, if bio_add_page of a single page to an empty bio fails drbd: Removed left over, now wrong comments drbd: serialize admin requests for new verify run with pending bitmap io ...
2011-03-27Merge branch 'for-linus-1' of git://git.infradead.org/mtd-2.6Linus Torvalds7-0/+188
* 'for-linus-1' of git://git.infradead.org/mtd-2.6: (49 commits) mtd: mtdswap: fix compilation warning mtdswap: kill strict error handling option mtd: nand: enable software BCH ECC in nand simulator mtd: nand: add software BCH ECC support mtd: fix printf format warnings, mostly lack of %zd for size_t, in mtdswap mtd: sm_rtl: check kmalloc return value mtd: cfi: add support for AMIC flashes (e.g. A29L160AT) lib: add shared BCH ECC library mtd: mxc_nand: fix OOB corruption when page size > 2KiB mtd: DaVinci: Removed header file that is not required mtd: pxa3xx_nand: clean the keep configure code mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself mtd: pxa3xx_nand: unify prepare command mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function mtd: pxa3xx_nand: rework irq logic mtd: pxa3xx_nand: make scan procedure more clear mtd: speedtest: fix integer overflow mtd: mxc_nand: fix read past buffer end mtd: omap3: nand: report corrected ecc errors jffs2: remove a trailing white space in commentaries ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 21:09:00 +0000