summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2011-02-23tipc: Clean out all remaining instances of #if 0'd unused codeAllan Stephens2-34/+2
Remove all instances of legacy or proposed-but-not-implemented code that lives within an #if 0 ... #endif block. If some of it is needed in the future it can recovered out of history, but there is no need for it to clutter up the active code base. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23tipc: Improve handling of invalid link tolerance valuesAllan Stephens1-0/+4
Enhances TIPC link code to ignore an invalid link tolerance value contained in an incoming LINK_PROTOCOL message, rather than processing the value and potentially causing a divide-by-zero error. Also add a compile-time check that catches attempts to redefine TIPC's minimum link tolerance value in a manner that might result in the same divide-by-zero error at run-time. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-22net: Make flow cache paths use a const struct flowi.David S. Miller2-6/+8
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22net: Mark flowi arg to flow_cache_uli_match() const.David S. Miller1-1/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_state_find() const.David S. Miller1-2/+4
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to security_xfrm_state_pol_flow_match() const.David S. Miller1-3/+4
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_selector_match() const.David S. Miller1-1/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark token args to addr_match() const.David S. Miller1-6/+7
Also, make it return a real bool. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_type->reject() const.David S. Miller1-1/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to ->init_tempsel() const.David S. Miller1-1/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to ->fill_dst() const.David S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to ->get_tos() const.David S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg const in key extraction helpers.David S. Miller1-6/+6
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22net: add __rcu annotations to sk_wq and wqEric Dumazet2-4/+6
Add proper RCU annotations/verbs to sk_wq and wq members Fix __sctp_write_space() sk_sleep() abuse (and sock->wq access) Fix sunrpc sk_sleep() abuse too Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-20tcp: Remove debug macro of TCP_CHECK_TIMERShan Wei1-2/+0
Now, TCP_CHECK_TIMER is not used for debuging, it does nothing. And, it has been there for several years, maybe 6 years. Remove it to keep code clearer. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-19Merge branch 'master' of ↵David S. Miller40-124/+191
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/e1000e/netdev.c net/xfrm/xfrm_policy.c
2011-02-19net: dcb: match dcb_app protocol field with 802.1Qaz specJohn Fastabend1-1/+1
The dcb_app protocol field is a __u32 however the 802.1Qaz specification defines it as a 16 bit field. This patch brings the structure inline with the spec making it a __u16. CC: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-19Merge branch 'master' of ↵David S. Miller1-11/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2011-02-18Merge branch 'rtc-for-linus' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: Re-enable UIE timer/polling emulation RTC: Revert UIE emulation removal RTC: Release mutex in error path of rtc_alarm_irq_enable
2011-02-18ipv4: Add hash table of interface addresses.David S. Miller1-0/+1
This will be used to optimize __ip_dev_find() and friends. With help from Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18Merge branch 'fixes-2.6.38' of ↵Linus Torvalds3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq * 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies long workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable' workqueue: wake up a worker when a rescuer is leaving a gcwq
2011-02-18Expand CONFIG_DEBUG_LIST to several other list operationsLinus Torvalds1-3/+9
When list debugging is enabled, we aim to readably show list corruption errors, and the basic list_add/list_del operations end up having extra debugging code in them to do some basic validation of the list entries. However, "list_del_init()" and "list_move[_tail]()" ended up avoiding the debug code due to how they were written. This fixes that. So the _next_ time we have list_move() problems with stale list entries, we'll hopefully have an easier time finding them.. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-17ipv4: Use const'ify fib_result deep in the route call chains.David S. Miller1-1/+1
The only troublesome bit here is __mkroute_output which wants to override res->fi and res->type, compute those in local variables instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17ipv4: Mark fib_combine_itag()'s 'res' arg as const.David S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17net: Add initial_ref arg to dst_alloc().David S. Miller1-1/+1
This allows avoiding multiple writes to the initial __refcnt. The most simplest cases of wanting an initial reference of "1" in ipv4 and ipv6 have been converted, the rest have been left along and kept at the existing "0". Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17RTC: Re-enable UIE timer/polling emulationJohn Stultz1-0/+1
This patch re-enables UIE timer/polling emulation for rtc devices that do not support alarm irqs. CC: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> CC: Thomas Gleixner <tglx@linutronix.de> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-17RTC: Revert UIE emulation removalJohn Stultz1-0/+14
Uwe pointed out that my alarm based UIE emulation is not sufficient to replace the older timer/polling based UIE emulation on devices where there is no alarm irq. This causes rtc devices without alarms to return -EINVAL to UIE ioctls. The fix is to re-instate the old timer/polling method for devices without alarm irqs. This patch reverts the following commits: 042620a018afcfba1d678062b62e46 - Remove UIE emulation 1daeddd5962acad1bea55e524fc0fa - Cleanup removed UIE emulation declaration b5cc8ca1c9c3a37eaddf709b2fd3e1 - Remove Kconfig symbol for UIE emulation The emulation mode will still need to be wired-in with a following patch before it will work. CC: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> CC: Thomas Gleixner <tglx@linutronix.de> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-17net: introduce NETIF_F_RXCSUMMichał Mirosław2-2/+4
Introduce NETIF_F_RXCSUM to replace device-private flags for RX checksum offload. Integrate it with ndo_fix_features. ethtool_op_get_rx_csum() is removed altogether as nothing in-tree uses it. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17net: Introduce new feature setting opsMichał Mirosław2-2/+120
This introduces a new framework to handle device features setting. It consists of: - new fields in struct net_device: + hw_features - features that hw/driver supports toggling + wanted_features - features that user wants enabled, when possible - new netdev_ops: + feat = ndo_fix_features(dev, feat) - API checking constraints for enabling features or their combinations + ndo_set_features(dev) - API updating hardware state to match changed dev->features - new ethtool commands: + ETHTOOL_GFEATURES/ETHTOOL_SFEATURES: get/set dev->wanted_features and trigger device reconfiguration if resulting dev->features changed + ETHTOOL_GSTRINGS(ETH_SS_FEATURES): get feature bits names (meaning) Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17ethtool: factorize get/set_one_featureMichał Mirosław1-0/+6
This allows to enable GRO even if RX csum is disabled. GRO will not be used for packets without hardware checksum anyway. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17ethtool: enable GSO and GRO by defaultMichał Mirosław1-0/+3
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-17netfilter: tproxy: do not assign timewait sockets to skb->skFlorian Westphal1-11/+1
Assigning a socket in timewait state to skb->sk can trigger kernel oops, e.g. in nfnetlink_log, which does: if (skb->sk) { read_lock_bh(&skb->sk->sk_callback_lock); if (skb->sk->sk_socket && skb->sk->sk_socket->file) ... in the timewait case, accessing sk->sk_callback_lock and sk->sk_socket is invalid. Either all of these spots will need to add a test for sk->sk_state != TCP_TIME_WAIT, or xt_TPROXY must not assign a timewait socket to skb->sk. This does the latter. If a TW socket is found, assign the tproxy nfmark, but skip the skb->sk assignment, thus mimicking behaviour of a '-m socket .. -j MARK/ACCEPT' re-routing rule. The 'SYN to TW socket' case is left unchanged -- we try to redirect to the listener socket. Cc: Balazs Scheidler <bazsi@balabit.hu> Cc: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2-6/+24
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla2xxx: Return DID_NO_CONNECT when FC device is lost. [SCSI] mptfusion: Bump version 03.04.18 [SCSI] mptfusion: Fix Incorrect return value in mptscsih_dev_reset [SCSI] mptfusion: mptctl_release is required in mptctl.c [SCSI] target: fix use after free detected by SLUB poison [SCSI] target: Remove procfs based target_core_mib.c code [SCSI] target: Fix SCF_SCSI_CONTROL_SG_IO_CDB breakage [SCSI] target: Fix top-level configfs_subsystem default_group shutdown breakage [SCSI] target: fixed missing lock drop in error path [SCSI] target: Fix demo-mode MappedLUN shutdown UA/PR breakage [SCSI] target/iblock: Fix failed bd claim NULL pointer dereference [SCSI] target: iblock/pscsi claim checking for NULL instead of IS_ERR [SCSI] scsi_debug: Fix 32-bit overflow in do_device_access causing memory corruption [SCSI] qla2xxx: Change from irq to irqsave with host_lock [SCSI] qla2xxx: Fix race that could hang kthread_stop()
2011-02-16workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'Tejun Heo3-6/+6
There are two spellings in use for 'freeze' + 'able' - 'freezable' and 'freezeable'. The former is the more prominent one. The latter is mostly used by workqueue and in a few other odd places. Unify the spelling to 'freezable'. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Dubov <oakad@yahoo.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Steven Whitehouse <swhiteho@redhat.com>
2011-02-15thp: prevent hugepages during args/env copying into the user stackAndrea Arcangeli1-1/+2
Transparent hugepages can only be created if rmap is fully functional. So we must prevent hugepages to be created while is_vma_temporary_stack() is true. This also optmizes away some harmless but unnecessary setting of khugepaged_scan.address and it switches some BUG_ON to VM_BUG_ON. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-15Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds1-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix text_poke_smp_batch() deadlock perf tools: Fix thread_map event synthesizing in top and record watchdog, nmi: Lower the severity of error messages ARM: oprofile: Fix backtraces in timer mode oprofile: Fix usage of CONFIG_HW_PERF_EVENTS for oprofile_perf_init and friends
2011-02-15Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: matrix_keypad - increase the limit of rows and columns Input: wacom - fix error path in wacom_probe() Input: ads7846 - check proper condition when freeing gpio Revert "Input: do not pass injected events back to the originating handler" Input: sysrq - rework re-inject logic Input: serio - clear pending rescans after sysfs driver rebind Input: rotary_encoder - use proper irqflags Input: wacom_w8001 - report resolution to userland
2011-02-15Merge branch 'urgent' of ↵Ingo Molnar1-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2011-02-14phy/micrel: add ability to support 50MHz RMII clock on KZS8051RNLBaruch Siach1-0/+16
Platform code can now set the MICREL_PHY_50MHZ_CLK bit of dev_flags in a fixup routine (registered with phy_register_fixup_for_uid()), to make the KZS8051RNL PHY work with 50MHz RMII reference clock. Cc: David J. Choi <david.choi@micrel.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13rtnetlink: implement setting of master deviceJiri Pirko1-0/+12
This patch allows userspace to enslave/release slave devices via netlink interface using IFLA_MASTER. This introduces generic way to add/remove underling devices. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13klist: Fix object alignment on 64-bit.David Miller1-1/+1
Commit c0e69a5bbc6f ("klist.c: bit 0 in pointer can't be used as flag") intended to make sure that all klist objects were at least pointer size aligned, but used the constant "4" which only works on 32-bit. Use "sizeof(void *)" which is correct in all cases. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: stable <stable@kernel.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-13net: make dev->master generalJiri Pirko1-0/+7
dev->master is now tightly connected to bonding driver. This patch makes this pointer more general and ready to be used by others. - netdev_set_master() - bond specifics moved to new function netdev_set_bond_master() - introduced netif_is_bond_slave() to check if device is a bonding slave Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13net: remove the unnecessary dance around skb_bond_should_dropJiri Pirko1-11/+0
No need to check (master) twice and to drive in and out the header file. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-12[SCSI] target: fix use after free detected by SLUB poisonNicholas Bellinger1-0/+1
This patch moves a large number of memory release paths inside of the configfs callback target_core_hba_item_ops->release() called from within fs/configfs/item.c: config_item_cleanup() context. This patch resolves the SLUB 'Poison overwritten' warnings. Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] target: Remove procfs based target_core_mib.c codeNicholas Bellinger2-6/+23
This patch removes the legacy procfs based target_core_mib.c code, and moves the necessary scsi_index_tables functions and defines into target_core_transport.c and target_core_base.h code to allow existing fabric independent statistics to function. This includes the removal of a handful of 'atomic_t mib_ref_count' counters used in struct se_node_acl, se_session and se_hba to prevent removal while using seq_list procfs walking logic. [jejb: fix up compile failures] Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-11ixgbe: DCB, implement 802.1Qaz routinesJohn Fastabend1-0/+5
Implements 802.1Qaz support for ixgbe driver. Additionally, this adds IEEE_8021QAZ_TSA_{} defines to dcbnl.h this is to avoid having to use cryptic numeric codes for the TSA type. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11Input: matrix_keypad - increase the limit of rows and columnsTrilok Soni1-2/+2
Some keyboard controllers support more than 16 columns and rows. Increase the limit to 32. Signed-off-by: Trilok Soni <tsoni@codeaurora.org> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-11security: add cred argument to security_capable()Chris Wright1-3/+3
Expand security_capable() to include cred, so that it can be usable in a wider range of call sites. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-02-10inet: Create a mechanism for upward inetpeer propagation into routes.David S. Miller2-0/+2
If we didn't have a routing cache, we would not be able to properly propagate certain kinds of dynamic path attributes, for example PMTU information and redirects. The reason is that if we didn't have a routing cache, then there would be no way to lookup all of the active cached routes hanging off of sockets, tunnels, IPSEC bundles, etc. Consider the case where we created a cached route, but no inetpeer entry existed and also we were not asked to pre-COW the route metrics and therefore did not force the creation a new inetpeer entry. If we later get a PMTU message, or a redirect, and store this information in a new inetpeer entry, there is no way to teach that cached route about the newly existing inetpeer entry. The facilities implemented here handle this problem. First we create a generation ID. When we create a cached route of any kind, we remember the generation ID at the time of attachment. Any time we force-create an inetpeer entry in response to new path information, we bump that generation ID. The dst_ops->check() callback is where the knowledge of this event is propagated. If the global generation ID does not equal the one stored in the cached route, and the cached route has not attached to an inetpeer yet, we look it up and attach if one is found. Now that we've updated the cached route's information, we update the route's generation ID too. This clears the way for implementing PMTU and redirects directly in the inetpeer cache. There is absolutely no need to consult cached route information in order to maintain this information. At this point nothing bumps the inetpeer genids, that comes in the later changes which handle PMTUs and redirects using inetpeers. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-10inetpeer: Add redirect and PMTU discovery cached info.David S. Miller1-7/+11
Validity of the cached PMTU information is indicated by it's expiration value being non-zero, just as per dst->expires. The scheme we will use is that we will remember the pre-ICMP value held in the metrics or route entry, and then at expiration time we will restore that value. In this way PMTU expiration does not kill off the cached route as is done currently. Redirect information is permanent, or at least until another redirect is received. Signed-off-by: David S. Miller <davem@davemloft.net>