Age | Commit message (Collapse) | Author | Files | Lines |
|
For CONFIG_XEN_PVH=y, xen.h uses bool before the type is known. Include
<linux/types.h> earlier.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221123131057.3864183-1-jani.nikula@intel.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This is needed to avoid having to parse the same device-tree
several times for a given device.
For this to work we need to install the xen_virtio_restricted_mem_acc
callback in Arm's xen_guest_init() which is same callback as x86's
PV and HVM modes already use and remove the manual assignment in
xen_setup_dma_ops(). Also we need to split the code to initialize
backend_domid into a separate function.
Prior to current patch we parsed the device-tree three times:
1. xen_setup_dma_ops()->...->xen_is_dt_grant_dma_device()
2. xen_setup_dma_ops()->...->xen_dt_grant_init_backend_domid()
3. xen_virtio_mem_acc()->...->xen_is_dt_grant_dma_device()
With current patch we parse the device-tree only once in
xen_virtio_restricted_mem_acc()->...->xen_dt_grant_init_backend_domid()
Other benefits are:
- Not diverge from x86 when setting up Xen grant DMA ops
- Drop several global functions
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221025162004.8501-2-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Use an x86-specific virtio_check_mem_acc_cb() for Xen in order to setup
the correct DMA ops.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # common code
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Implement support for the HVMOP_set_evtchn_upcall_vector hypercall in
order to set the per-vCPU event channel vector callback on Linux and
use it in preference of HVM_PARAM_CALLBACK_IRQ.
If the per-VCPU vector setup is successful on BSP, use this method
for the APs. If not, fallback to the global vector-type callback.
Also register callback_irq at per-vCPU event channel setup to trick
toolstack to think the domain is enlightened.
Suggested-by: "Roger Pau Monné" <roger.pau@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220729070416.23306-1-jane.malalane@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit fa1f57421e0b ("xen/virtio: Enable restricted memory access using
Xen grant mappings") introduced a new requirement for using virtio
devices: the backend now needs to support the VIRTIO_F_ACCESS_PLATFORM
feature.
This is an undue requirement for non-PV guests, as those can be operated
with existing backends without any problem, as long as those backends
are running in dom0.
Per default allow virtio devices without grant support for non-PV
guests.
On Arm require VIRTIO_F_ACCESS_PLATFORM for devices having been listed
in the device tree to use grants.
Add a new config item to always force use of grants for virtio.
Fixes: fa1f57421e0b ("xen/virtio: Enable restricted memory access using Xen grant mappings")
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 guest using Xen
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220622063838.8854-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Instead of having a global flag to require restricted memory access
for all virtio devices, introduce a callback which can select that
requirement on a per-device basis.
For convenience add a common function returning always true, which can
be used for use cases like SEV.
Per default use a callback always returning false.
As the callback needs to be set in early init code already, add a
virtio anchor which is builtin in case virtio is enabled.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 guest using Xen
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220622063838.8854-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
By assigning xen-grant DMA ops we will restrict memory access for
passed device using Xen grant mappings. This is needed for using any
virtualized device (e.g. virtio) in Xen guests in a safe manner.
Please note, for the virtio devices the XEN_VIRTIO config should
be enabled (it forces ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS).
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1654197833-25362-9-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Use the presence of "iommus" property pointed to the IOMMU node with
recently introduced "xen,grant-dma" compatible as a clear indicator
of enabling Xen grant mappings scheme for that device and read the ID
of Xen domain where the corresponding backend is running. The domid
(domain ID) is used as an argument to the Xen grant mapping APIs.
To avoid the deferred probe timeout which takes place after reusing
generic IOMMU device tree bindings (because the IOMMU device never
becomes available) enable recently introduced stub IOMMU driver by
selecting XEN_GRANT_DMA_IOMMU.
Also introduce xen_is_grant_dma_device() to check whether xen-grant
DMA ops need to be set for a passed device.
Remove the hardcoded domid 0 in xen_grant_setup_dma_ops().
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1654197833-25362-8-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In order to support virtio in Xen guests add a config option XEN_VIRTIO
enabling the user to specify whether in all Xen guests virtio should
be able to access memory via Xen grant mappings only on the host side.
Also set PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS feature from the guest
initialization code on Arm and x86 if CONFIG_XEN_VIRTIO is enabled.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1654197833-25362-5-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Introduce Xen grant DMA-mapping layer which contains special DMA-mapping
routines for providing grant references as DMA addresses to be used by
frontends (e.g. virtio) in Xen guests.
Add the needed functionality by providing a special set of DMA ops
handling the needed grant operations for the I/O pages.
The subsequent commit will introduce the use case for xen-grant DMA ops
layer to enable using virtio devices in Xen guests in a safe manner.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1654197833-25362-4-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
For support of virtio via grant mappings in rare cases larger mappings
using consecutive grants are needed. Support those by adding a bitmap
of free grants.
As consecutive grants will be needed only in very rare cases (e.g. when
configuring a virtio device with a multi-page ring), optimize for the
normal case of non-consecutive allocations.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1654197833-25362-3-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This patch introduces new helper and places it in new header.
The helper's purpose is to assign any Xen specific DMA ops in
a single place. For now, we deal with xen-swiotlb DMA ops only.
The one of the subsequent commits in current series will add
xen-grant DMA ops case.
Also re-use the xen_swiotlb_detect() check on Arm32.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
[For arm64]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1654197833-25362-2-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"Two cleanup patches for Xen related code and (more important) an
update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
down"
* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: replace xen_remap() with memremap()
MAINTAINERS: Update Xen maintainership
xen: switch gnttab_end_foreign_access() to take a struct page pointer
|
|
xen_remap() is used to establish mappings for frames not under direct
control of the kernel: for Xenstore and console ring pages, and for
grant pages of non-PV guests.
Today xen_remap() is defined to use ioremap() on x86 (doing uncached
mappings), and ioremap_cache() on Arm (doing cached mappings).
Uncached mappings for those use cases are bad for performance, so they
should be avoided if possible. As all use cases of xen_remap() don't
require uncached mappings (the mapped area is always physical RAM),
a mapping using the standard WB cache mode is fine.
As sparse is flagging some of the xen_remap() use cases to be not
appropriate for iomem(), as the result is not annotated with the
__iomem modifier, eliminate xen_remap() completely and replace all
use cases with memremap() specifying the MEMREMAP_WB caching mode.
xen_unmap() can be replaced with memunmap().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220530082634.6339-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Instead of a virtual kernel address use a pointer of the associated
struct page as second parameter of gnttab_end_foreign_access().
Most users have that pointer available already and are creating the
virtual address from it, risking problems in case the memory is
located in highmem.
gnttab_end_foreign_access() itself won't need to get the struct page
from the address again.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
dma-direct: don't over-decrypt memory
swiotlb: max mapping size takes min align mask into account
swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
swiotlb: use the right nslabs value in swiotlb_init_remap
swiotlb: don't panic when the swiotlb buffer can't be allocated
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
x86: remove cruft from <asm/dma-mapping.h>
swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
swiotlb: merge swiotlb-xen initialization into swiotlb
swiotlb: provide swiotlb_init variants that remap the buffer
swiotlb: pass a gfp_mask argument to swiotlb_init_late
swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
swiotlb: make the swiotlb_init interface more useful
x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
x86: remove the IOMMU table infrastructure
MIPS/octeon: use swiotlb_init instead of open coding it
arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
swiotlb: rename swiotlb_late_init_with_default_size
...
|
|
Sync the xs_wire.h header file in Linux with the one in Xen.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220513211938.719341-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
There is no external user of xenbus_grant_ring() left, so merge it into
the only caller xenbus_setup_ring().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Most PV device frontends share very similar code for setting up shared
ring buffers:
- allocate page(s)
- init the ring admin data
- give the backend access to the ring via grants
Tearing down the ring requires similar actions in all frontends again:
- remove grants
- free the page(s)
Provide service functions xenbus_setup_ring() and xenbus_teardown_ring()
for that purpose.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Update include/xen/interface/io/ring.h to its newest version.
Switch the two improper use cases of RING_HAS_UNCONSUMED_RESPONSES() to
XEN_RING_NR_UNCONSUMED_RESPONSES() in order to avoid the nasty
XEN_RING_HAS_UNCONSUMED_IS_BOOL #define.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Update include/xen/interface/grant_table.h to its newest version.
This allows to drop some private definitions in grant-table.c and
include/xen/grant_table.h.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Update include/xen/interface/io/vscsiif.h to its newest version.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220428075323.12853-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
swiotlb-xen uses very different ways to allocate coherent memory on x86
vs arm. On the former it allocates memory from the page allocator, while
on the later it reuses the dma-direct allocator the handles the
complexities of non-coherent DMA on arm platforms.
Unfortunately the complexities of trying to deal with the two cases in
the swiotlb-xen.c code lead to a bug in the handling of
DMA_ATTR_NO_KERNEL_MAPPING on arm. With the DMA_ATTR_NO_KERNEL_MAPPING
flag the coherent memory allocator does not actually allocate coherent
memory, but just a DMA handle for some memory that is DMA addressable
by the device, but which does not have to have a kernel mapping. Thus
dereferencing the return value will lead to kernel crashed and memory
corruption.
Fix this by using the dma-direct allocator directly for arm, which works
perfectly fine because on arm swiotlb-xen is only used when the domain is
1:1 mapped, and then simplifying the remaining code to only cater for the
x86 case with DMA coherent device.
Reported-by: Rahul Singh <Rahul.Singh@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Rahul Singh <rahul.singh@arm.com>
|
|
Reuse the generic swiotlb initialization for xen-swiotlb. For ARM/ARM64
this works trivially, while for x86 xen_swiotlb_fixup needs to be passed
as the remap argument to swiotlb_init_remap/swiotlb_init_late.
Note that the lower bound of the swiotlb size is changed to the smaller
IO_TLB_MIN_SLABS based value with this patch, but that is fine as the
2MB value used in Xen before was just an optimization and is not the
hard lower bound.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
The gnttab_end_foreign_access() family of functions is taking a
"readonly" parameter, which isn't used. Remove it from the function
parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220311103429.12845-3-jgross@suse.com
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
All grant table operations related to the "transfer" functionality
are unused currently. There have been users in the old days of the
"Xen-o-Linux" kernel, but those didn't make it upstream.
So remove the "transfer" related functions.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220311103429.12845-2-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
gnttab_end_foreign_access() is used to free a grant reference and
optionally to free the associated page. In case the grant is still in
use by the other side processing is being deferred. This leads to a
problem in case no page to be freed is specified by the caller: the
caller doesn't know that the page is still mapped by the other side
and thus should not be used for other purposes.
The correct way to handle this situation is to take an additional
reference to the granted page in case handling is being deferred and
to drop that reference when the grant reference could be freed
finally.
This requires that there are no users of gnttab_end_foreign_access()
left directly repurposing the granted page after the call, as this
might result in clobbered data or information leaks via the not yet
freed grant reference.
This is part of CVE-2022-23041 / XSA-396.
Reported-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V4:
- expand comment in header
V5:
- get page ref in case of kmalloc() failure, too
|
|
Remove gnttab_query_foreign_access(), as it is unused and unsafe to
use.
All previous use cases assumed a grant would not be in use after
gnttab_query_foreign_access() returned 0. This information is useless
in best case, as it only refers to a situation in the past, which could
have changed already.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
|
|
Add a new grant table function gnttab_try_end_foreign_access(), which
will remove and free a grant if it is not in use.
Its main use case is to either free a grant if it is no longer in use,
or to take some other action if it is still in use. This other action
can be an error exit, or (e.g. in the case of blkfront persistent grant
feature) some special handling.
This is CVE-2022-23036, CVE-2022-23038 / part of XSA-396.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V2:
- new patch
V4:
- add comments to header (Jan Beulich)
|
|
It is better/preferred not to include file names in source files
because (a) they are not needed and (b) they can be incorrect,
so just delete this incorrect file name.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: xen-devel@lists.xenproject.org
Link: https://lore.kernel.org/r/20220130191705.24971-1-rdunlap@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a fix for the Xen gntdev driver
- a fix for running as Xen dom0 booted via EFI and the EFI framebuffer
being located above 4GB
- a series for support of mapping other guest's memory by using zone
device when running as Xen guest on Arm
* tag 'for-linus-5.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
dt-bindings: xen: Clarify "reg" purpose
arm/xen: Read extended regions from DT and init Xen resource
xen/unpopulated-alloc: Add mechanism to use Xen resource
xen/balloon: Bring alloc(free)_xenballooned_pages helpers back
arm/xen: Switch to use gnttab_setup_auto_xlat_frames() for DT
xen/unpopulated-alloc: Drop check for virt_addr_valid() in fill_list()
xen/x86: obtain upper 32 bits of video frame buffer address for Dom0
xen/gntdev: fix unmap notification order
|
|
The main reason of this change is that unpopulated-alloc
code cannot be used in its current form on Arm, but there
is a desire to reuse it to avoid wasting real RAM pages
for the grant/foreign mappings.
The problem is that system "iomem_resource" is used for
the address space allocation, but the really unallocated
space can't be figured out precisely by the domain on Arm
without hypervisor involvement. For example, not all device
I/O regions are known by the time domain starts creating
grant/foreign mappings. And following the advise from
"iomem_resource" we might end up reusing these regions by
a mistake. So, the hypervisor which maintains the P2M for
the domain is in the best position to provide unused regions
of guest physical address space which could be safely used
to create grant/foreign mappings.
Introduce new helper arch_xen_unpopulated_init() which purpose
is to create specific Xen resource based on the memory regions
provided by the hypervisor to be used as unused space for Xen
scratch pages. If arch doesn't define arch_xen_unpopulated_init()
the default "iomem_resource" will be used.
Update the arguments list of allocate_resource() in fill_list()
to always allocate a region from the hotpluggable range
(maximum possible addressable physical memory range for which
the linear mapping could be created). If arch doesn't define
arch_get_mappable_range() the default range (0,-1) will be used.
The behaviour on x86 won't be changed by current patch as both
arch_xen_unpopulated_init() and arch_get_mappable_range()
are not implemented for it.
Also fallback to allocate xenballooned pages (balloon out RAM
pages) if we do not have any suitable resource to work with
(target_resource is invalid) and as the result we won't be able
to provide unpopulated pages on a request.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1639080336-26573-5-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This patch rolls back some of the changes introduced by commit
121f2faca2c0a "xen/balloon: rename alloc/free_xenballooned_pages"
in order to make possible to still allocate xenballooned pages
if CONFIG_XEN_UNPOPULATED_ALLOC is enabled.
On Arm the unpopulated pages will be allocated on top of extended
regions provided by Xen via device-tree (the subsequent patches
will add required bits to support unpopulated-alloc feature on Arm).
The problem is that extended regions feature has been introduced
into Xen quite recently (during 4.16 release cycle). So this
effectively means that Linux must only use unpopulated-alloc on Arm
if it is running on "new Xen" which advertises these regions.
But, it will only be known after parsing the "hypervisor" node
at boot time, so before doing that we cannot assume anything.
In order to keep working if CONFIG_XEN_UNPOPULATED_ALLOC is enabled
and the extended regions are not advertised (Linux is running on
"old Xen", etc) we need the fallback to alloc_xenballooned_pages().
This way we wouldn't reduce the amount of memory usable (wasting
RAM pages) for any of the external mappings anymore (and eliminate
XSA-300) with "new Xen", but would be still functional ballooning
out RAM pages with "old Xen".
Also rename alloc(free)_xenballooned_pages to xen_alloc(free)_ballooned_pages
and make xen_alloc(free)_unpopulated_pages static inline in xen.h
if CONFIG_XEN_UNPOPULATED_ALLOC is disabled.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1639080336-26573-4-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The hypervisor has been supplying this information for a couple of major
releases. Make use of it. The need to set a flag in the capabilities
field also points out that the prior setting of that field from the
hypervisor interface's gbl_caps one was wrong, so that code gets deleted
(there's also no equivalent of this in native boot code).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/a3df8bf3-d044-b7bb-3383-cd5239d6d4af@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Xen console driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using a lateeoi event
channel.
For the normal domU initial console this requires the introduction of
bind_evtchn_to_irq_lateeoi() as there is no xenbus device available
at the time the event channel is bound to the irq.
As the decision whether an interrupt was spurious or not requires to
test for bytes having been read from the backend, move sending the
event into the if statement, as sending an event without having found
any bytes to be read is making no sense at all.
This is part of XSA-391
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V2:
- slightly adapt spurious irq detection (Jan Beulich)
V3:
- fix spurious irq detection (Jan Beulich)
|
|
Add the definition of pvUSB protocol used between the pvUSB frontend in
a Xen domU and the pvUSB backend in a Xen driver domain (usually Dom0).
This header was originally provided by Fujitsu for Xen based on Linux
2.6.18.
Changes are:
- adapt to Linux kernel style guide
- use Xen namespace
- add lots of comments
- don't use kernel internal defines
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211123132048.5335-2-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When booting the xenbus driver will wait for PV devices to have
connected to their backends before continuing. The timeout is different
between essential and non-essential devices.
Non-essential devices are identified by their nodenames directly in the
xenbus driver, which requires to update this list in case a new device
type being non-essential is added (this was missed for several types
in the past).
In order to avoid this problem, add a "not_essential" flag to struct
xenbus_driver which can be set to "true" by the respective frontend.
Set this flag for the frontends currently regarded to be not essential
(vkbs and vfb) and use it for testing in the xenbus driver.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211022064800.14978-2-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
alloc_xenballooned_pages() and free_xenballooned_pages() are used as
direct replacements of xen_alloc_unpopulated_pages() and
xen_free_unpopulated_pages() in case CONFIG_XEN_UNPOPULATED_ALLOC isn't
defined.
Guard both functions with !CONFIG_XEN_UNPOPULATED_ALLOC and rename them
to the xen_*() variants they are replacing. This allows to remove some
ifdeffery from the xen.h header file. Adapt the prototype of the
functions to match.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211102092234.17852-1-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Put the definitions of the hypercalls usable only by pv guests inside
CONFIG_XEN_PV sections.
On Arm two dummy functions related to pv hypercalls can be removed.
While at it remove the no longer supported tmem hypercall definition.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211028081221.2475-3-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Xen-pciback driver was designed to be built for x86 only. But it
can also be used by other architectures, e.g. Arm.
Currently PCI backend implements multiple functionalities at a time,
such as:
1. It is used as a database for assignable PCI devices, e.g. xl
pci-assignable-{add|remove|list} manipulates that list. So, whenever
the toolstack needs to know which PCI devices can be passed through
it reads that from the relevant sysfs entries of the pciback.
2. It is used to hold the unbound PCI devices list, e.g. when passing
through a PCI device it needs to be unbound from the relevant device
driver and bound to pciback (strictly speaking it is not required
that the device is bound to pciback, but pciback is again used as a
database of the passed through PCI devices, so we can re-bind the
devices back to their original drivers when guest domain shuts down)
3. Device reset for the devices being passed through
4. Para-virtualised use-cases support
The para-virtualised part of the driver is not always needed as some
architectures, e.g. Arm or x86 PVH Dom0, are not using backend-frontend
model for PCI device passthrough.
For such use-cases make the very first step in splitting the
xen-pciback driver into two parts: Xen PCI stub and PCI PV backend
drivers.
For that add new configuration options CONFIG_XEN_PCI_STUB and
CONFIG_XEN_PCIDEV_STUB, so the driver can be limited in its
functionality, e.g. no support for para-virtualised scenario.
x86 platform will continue using CONFIG_XEN_PCIDEV_BACKEND for the
fully featured backend driver.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211028143620.144936-1-andr2000@gmail.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Commit b24413180f5600 ("License cleanup: add SPDX GPL-2.0 license
identifier to files with no license") was meant to do a tree-wide
cleanup for files without any license information by adding a SPDX
GPL-2.0 line to them.
Unfortunately this was applied even to several Xen-related headers
which have been originally under the MIT license, but obviously have
been copied to the Linux tree from the Xen project without keeping the
license boiler plate as required.
Correct that by changing the license of those files back to "MIT".
Some files still contain the MIT license text. Replace that by the
related SPDX line.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211015143312.29900-1-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
The function doesn't use it and all of its callers say in a comment that
their respective arguments are to be non-NULL only in auto-translated
mode. Since xen_remap_domain_mfn_array() isn't supposed to be used by
non-PV, drop the parameter there as well. It was bogusly passed as non-
NULL (PRIV_VMA_LOCKED) by its only caller anyway. For
xen_remap_domain_gfn_range(), otoh, it's not clear at all why this
wouldn't want / might not need to gain auto-translated support down the
road, so the parameter is retained there despite now remaining unused
(and the only caller passing NULL); correct a respective comment as
well.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/036ad8a2-46f9-ac3d-6219-bdc93ab9e10b@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The code is unreachable for HVM or PVH, and it also makes little sense
in auto-translated environments. On Arm, with
xen_{create,destroy}_contiguous_region() both being stubs, I have a hard
time seeing what good the Xen specific variant does - the generic one
ought to be fine for all purposes there. Still Arm code explicitly
references symbols here, so the code will continue to be included there.
Instead of making PCI_XEN's "select" conditional, simply drop it -
SWIOTLB_XEN will be available unconditionally in the PV case anyway, and
is - as explained above - dead code in non-PV environments.
This in turn allows dropping the stubs for
xen_{create,destroy}_contiguous_region(), the former of which was broken
anyway - it failed to set the DMA handle output.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/5947b8ae-fdc7-225c-4838-84712265fc1e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Sync include/xen/interface/io/ring.h with Xen's newest version in
order to get the RING_COPY_RESPONSE() and RING_RESPONSE_PROD_OVERFLOW()
macros.
Note that this will correct the wrong license info by adding the
missing original copyright notice.
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Move xen_swiotlb_detect to a static inline function to make it available
to !CONFIG_XEN builds.
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210512201823.1963-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Merge yet more updates from Andrew Morton:
"This is everything else from -mm for this merge window.
90 patches.
Subsystems affected by this patch series: mm (cleanups and slub),
alpha, procfs, sysctl, misc, core-kernel, bitmap, lib, compat,
checkpatch, epoll, isofs, nilfs2, hpfs, exit, fork, kexec, gcov,
panic, delayacct, gdb, resource, selftests, async, initramfs, ipc,
drivers/char, and spelling"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (90 commits)
mm: fix typos in comments
mm: fix typos in comments
treewide: remove editor modelines and cruft
ipc/sem.c: spelling fix
fs: fat: fix spelling typo of values
kernel/sys.c: fix typo
kernel/up.c: fix typo
kernel/user_namespace.c: fix typos
kernel/umh.c: fix some spelling mistakes
include/linux/pgtable.h: few spelling fixes
mm/slab.c: fix spelling mistake "disired" -> "desired"
scripts/spelling.txt: add "overflw"
scripts/spelling.txt: Add "diabled" typo
scripts/spelling.txt: add "overlfow"
arm: print alloc free paths for address in registers
mm/vmalloc: remove vwrite()
mm: remove xlate_dev_kmem_ptr()
drivers/char: remove /dev/kmem for good
mm: fix some typos and code style problems
ipc/sem.c: mundane typo fixes
...
|
|
The section "19) Editor modelines and other cruft" in
Documentation/process/coding-style.rst clearly says, "Do not include any
of these in source files."
I recently receive a patch to explicitly add a new one.
Let's do treewide cleanups, otherwise some people follow the existing code
and attempt to upstream their favoriate editor setups.
It is even nicer if scripts/checkpatch.pl can check it.
If we like to impose coding style in an editor-independent manner, I think
editorconfig (patch [1]) is a saner solution.
[1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/
Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Christoph Hellwig has taken a cleaver and trimmed off the not-needed
code and nicely folded duplicate code in the generic framework.
This lays the groundwork for more work to add extra DMA-backend-ish in
the future. Along with that some bug-fixes to make this a nice working
package"
* 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: don't override user specified size in swiotlb_adjust_size
swiotlb: Fix the type of index
swiotlb: Make SWIOTLB_NO_FORCE perform no allocation
ARM: Qualify enabling of swiotlb_init()
swiotlb: remove swiotlb_nr_tbl
swiotlb: dynamically allocate io_tlb_default_mem
swiotlb: move global variables into a new io_tlb_mem structure
xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
xen-swiotlb: split xen_swiotlb_init
swiotlb: lift the double initialization protection from xen-swiotlb
xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
xen-swiotlb: remove xen_set_nslabs
xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
swiotlb: split swiotlb_tbl_sync_single
swiotlb: move orig addr and size validation into swiotlb_bounce
swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single
powerpc/svm: stop using io_tlb_start
|
|
Newer Xen versions expose two Xen feature flags to tell us if the domain
is directly mapped or not. Only when a domain is directly mapped it
makes sense to enable swiotlb-xen on ARM.
Introduce a function on ARM to check the new Xen feature flags and also
to deal with the legacy case. Call the function xen_swiotlb_detect.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210319200140.12512-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|