summaryrefslogtreecommitdiffstats
path: root/include/xen
AgeCommit message (Collapse)AuthorFilesLines
2021-02-23xen/events: add per-xenbus device event statistics and settingsJuergen Gross1-0/+7
Add syfs nodes for each xenbus device showing event statistics (number of events and spurious events, number of associated event channels) and for setting a spurious event threshold in case a frontend is sending too many events without being rogue on purpose. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210219154030.10892-7-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-02-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+3
Pull KVM updates from Paolo Bonzini: "x86: - Support for userspace to emulate Xen hypercalls - Raise the maximum number of user memslots - Scalability improvements for the new MMU. Instead of the complex "fast page fault" logic that is used in mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent, but the code that can run against page faults is limited. Right now only page faults take the lock for reading; in the future this will be extended to some cases of page table destruction. I hope to switch the default MMU around 5.12-rc3 (some testing was delayed due to Chinese New Year). - Cleanups for MAXPHYADDR checks - Use static calls for vendor-specific callbacks - On AMD, use VMLOAD/VMSAVE to save and restore host state - Stop using deprecated jump label APIs - Workaround for AMD erratum that made nested virtualization unreliable - Support for LBR emulation in the guest - Support for communicating bus lock vmexits to userspace - Add support for SEV attestation command - Miscellaneous cleanups PPC: - Support for second data watchpoint on POWER10 - Remove some complex workarounds for buggy early versions of POWER9 - Guest entry/exit fixes ARM64: - Make the nVHE EL2 object relocatable - Cleanups for concurrent translation faults hitting the same page - Support for the standard TRNG hypervisor call - A bunch of small PMU/Debug fixes - Simplification of the early init hypercall handling Non-KVM changes (with acks): - Detection of contended rwlocks (implemented only for qrwlocks, because KVM only needs it for x86) - Allow __DISABLE_EXPORTS from assembly code - Provide a saner follow_pfn replacements for modules" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits) KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes KVM: selftests: Don't bother mapping GVA for Xen shinfo test KVM: selftests: Fix hex vs. decimal snafu in Xen test KVM: selftests: Fix size of memslots created by Xen tests KVM: selftests: Ignore recently added Xen tests' build output KVM: selftests: Add missing header file needed by xAPIC IPI tests KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static locking/arch: Move qrwlock.h include after qspinlock.h KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2 KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path KVM: PPC: remove unneeded semicolon KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest KVM: PPC: Book3S HV: Fix radix guest SLB side channel KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR ...
2021-02-21Merge tag 'for-linus-5.12-rc1-tag' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "A series of Xen related security fixes, all related to limited error handling in Xen backend drivers" * tag 'for-linus-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkback: fix error handling in xen_blkbk_map() xen-scsiback: don't "handle" error by BUG() xen-netback: don't "handle" error by BUG() xen-blkback: don't "handle" error by BUG() xen/arm: don't ignore return errors from set_phys_to_machine Xen/gntdev: correct error checking in gntdev_map_grant_pages() Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages() Xen/x86: also check kernel mapping in set_foreign_p2m_mapping() Xen/x86: don't bail early from clear_foreign_p2m_mapping()
2021-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-3/+4
Pull networking updates from David Miller: "Here is what we have this merge window: 1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik. 2) Add RSS multi group support to octeontx2-pf driver, from Geetha Sowjanya. 3) Add support for KS8851 PHY. From Marek Vasut. 4) Add support for GarfieldPeak bluetooth controller from Kiran K. 5) Add support for half-duplex tcan4x5x can controllers. 6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw Liew. 7) Rework RX port offload infrastructure, particularly wrt, UDP tunneling, from Jakub Kicinski. 8) Add BCM72116 PHY support, from Florian Fainelli. 9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir Oltean. 10) Add support for picosecond rx delay in dwmac-meson8b chips. From Martin Blumenstingl. 11) Support TSO on xfrm interfaces from Eyal Birger. 12) Add support for MP_PRIO to mptcp stack, from Geliang Tang. 13) Support BCM4908 integrated switch, from Rafał Miłecki. 14) Support for directly accessing kernel module variables via module BTF info, from Andrii Naryiko. 15) Add DASH (esktop and mobile Architecture for System Hardware) support to r8169 driver, from Heiner Kallweit. 16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron. 17) Add support for 100 base0x SFP devices, from Bjarni Jonasson. 18) Support link aggregation in DSA, from Tobias Waldekranz. 19) Support for bitwidse atomics in bpf, from Brendan Jackman. 20) SmartEEE support in at803x driver, from Russell King. 21) Add support for flow based tunneling to GTP, from Pravin B Shelar. 22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder. 23) TLS RX offload for bonding, from Tariq Toukan. 24) RX decap offklload support in mac80211, from Felix Fietkou. 25) devlink health saupport in octeontx2-af, from George Cherian. 26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung 27) Delegated actionss support in mptcp, from Paolo Abeni. 28) Support receive timestamping when doin zerocopy tcp receive. From Arjun Ray. 29) HTB offload support for mlx5, from Maxim Mikityanskiy. 30) UDP GRO forwarding, from Maxim Mikityanskiy. 31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach. 32) Weighted random twos choice algorithm for ipvs, from Darby Payne. 33) Fix netdev registration deadlock, from Johannes Berg. 34) Various conversions to new tasklet api, from EmilRenner Berthing. 35) Bulk skb allocations in veth, from Lorenzo Bianconi. 36) New ethtool interface for lane setting, from Danielle Ratson. 37) Offload failiure notifications for routes, from Amit Cohen. 38) BCM4908 support, from Rafał Miłecki. 39) Support several new iwlwifi chips, from Ihab Zhaika. 40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski. 41) Support for mhi prrotocols, from Loic Poulain. 42) Optimize bpf program stats. 43) Implement RFC6056, for better port randomization, from Eric Dumazet. 44) hsr tag offloading support from George McCollister. 45) Netpoll support in qede, from Bhaskar Upadhaya. 46) 2005/400g speed support in bonding 3ad mode, from Nikolay Aleksandrov. 47) Netlink event support in mptcp, from Florian Westphal. 48) Better skbuff caching, from Alexander Lobakin. 49) MRP (Media Redundancy Protocol) offloading in DSA and a few drivers, from Horatiu Vultur. 50) mqprio saupport in mvneta, from Maxime Chevallier. 51) Remove of_phy_attach, no longer needed, from Florian Fainelli" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits) octeontx2-pf: Fix otx2_get_fecparam() cteontx2-pf: cn10k: Prevent harmless double shift bugs net: stmmac: Add PCI bus info to ethtool driver query output ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable. ptp: ptp_clockmatrix: Coding style - tighten vertical spacing. ptp: ptp_clockmatrix: Clean-up dev_*() messages. ptp: ptp_clockmatrix: Remove unused header declarations. ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable. ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock. net: stmmac: dwmac-sun8i: Add a shutdown callback net: stmmac: dwmac-sun8i: Minor probe function cleanup net: stmmac: dwmac-sun8i: Use reset_control_reset net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check net: stmmac: dwmac-sun8i: Return void from PHY unpower r8169: use macro pm_ptr net: mdio: Remove of_phy_attach() net: mscc: ocelot: select PACKING in the Kconfig net: re-solve some conflicts after net -> net-next merge net: dsa: tag_rtl4_a: Support also egress tags ...
2021-02-15Xen/gntdev: correct error checking in gntdev_map_grant_pages()Jan Beulich1-0/+1
Failure of the kernel part of the mapping operation should also be indicated as an error to the caller, or else it may assume the respective kernel VA is okay to access. Furthermore gnttab_map_refs() failing still requires recording successfully mapped handles, so they can be unmapped subsequently. This in turn requires there to be a way to tell full hypercall failure from partial success - preset map_op status fields such that they won't "happen" to look as if the operation succeeded. Also again use GNTST_okay instead of implying its value (zero). This is part of XSA-361. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-12Merge tag 'kvmarm-5.12' of ↵Paolo Bonzini1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.12 - Make the nVHE EL2 object relocatable, resulting in much more maintainable code - Handle concurrent translation faults hitting the same page in a more elegant way - Support for the standard TRNG hypervisor call - A bunch of small PMU/Debug fixes - Allow the disabling of symbol export from assembly code - Simplification of the early init hypercall handling
2021-02-11xen/events: link interdomain events to associated xenbus deviceJuergen Gross1-3/+4
In order to support the possibility of per-device event channel settings (e.g. lateeoi spurious event thresholds) add a xenbus device pointer to struct irq_info() and modify the related event channel binding interfaces to take the pointer to the xenbus device as a parameter instead of the domain id of the other side. While at it remove the stale prototype of bind_evtchn_to_irq_lateeoi(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11arm/xen: Don't probe xenbus as part of an early initcallJulien Grall1-2/+0
After Commit 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI"), xenbus_probe() will be called too early on Arm. This will recent to a guest hang during boot. If the hang wasn't there, we would have ended up to call xenbus_probe() twice (the second time is in xenbus_probe_initcall()). We don't need to initialize xenbus_probe() early for Arm guest. Therefore, the call in xen_guest_init() is now removed. After this change, there is no more external caller for xenbus_probe(). So the function is turned to a static one. Interestingly there were two prototypes for it. Cc: stable@vger.kernel.org Fixes: 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI") Reported-by: Ian Jackson <iwj@xenproject.org> Signed-off-by: Julien Grall <jgrall@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-04xen: add wc_sec_hi to struct shared_infoDavid Woodhouse1-1/+3
Xen added this in 2015 (Xen 4.6). On x86_64 and Arm it fills what was previously a 32-bit hole in the generic shared_info structure; on i386 it had to go at the end of struct arch_shared_info. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
2021-01-13xen: Fix event channel callback via INTX/GSIDavid Woodhouse1-1/+1
For a while, event channel notification via the PCI platform device has been broken, because we attempt to communicate with xenstore before we even have notifications working, with the xs_reset_watches() call in xs_init(). We tend to get away with this on Xen versions below 4.0 because we avoid calling xs_reset_watches() anyway, because xenstore might not cope with reading a non-existent key. And newer Xen *does* have the vector callback support, so we rarely fall back to INTX/GSI delivery. To fix it, clean up a bit of the mess of xs_init() and xenbus_probe() startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM case, deferring it to be called from xenbus_probe() in the XS_HVM case instead. Then fix up the invocation of xenbus_probe() to happen either from its device_initcall if the callback is available early enough, or when the callback is finally set up. This means that the hack of calling xenbus_probe() from a workqueue after the first interrupt, or directly from the PCI platform device setup, is no longer needed. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210113132606.422794-2-dwmw2@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-12-14xen/xenbus: Count pending messages for each watchSeongJae Park1-0/+2
This commit adds a counter of pending messages for each watch in the struct. It is used to skip unnecessary pending messages lookup in 'unregister_xenbus_watch()'. It could also be used in 'will_handle' callback. This is part of XSA-349 Cc: stable@vger.kernel.org Signed-off-by: SeongJae Park <sjpark@amazon.de> Reported-by: Michael Kurth <mku@amazon.de> Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-12-14xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()SeongJae Park1-1/+5
Some code does not directly make 'xenbus_watch' object and call 'register_xenbus_watch()' but use 'xenbus_watch_path()' instead. This commit adds support of 'will_handle' callback in the 'xenbus_watch_path()' and it's wrapper, 'xenbus_watch_pathfmt()'. This is part of XSA-349 Cc: stable@vger.kernel.org Signed-off-by: SeongJae Park <sjpark@amazon.de> Reported-by: Michael Kurth <mku@amazon.de> Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-12-14xen/xenbus: Allow watches discard events before queueingSeongJae Park1-0/+7
If handling logics of watch events are slower than the events enqueue logic and the events can be created from the guests, the guests could trigger memory pressure by intensively inducing the events, because it will create a huge number of pending events that exhausting the memory. Fortunately, some watch events could be ignored, depending on its handler callback. For example, if the callback has interest in only one single path, the watch wouldn't want multiple pending events. Or, some watches could ignore events to same path. To let such watches to volutarily help avoiding the memory pressure situation, this commit introduces new watch callback, 'will_handle'. If it is not NULL, it will be called for each new event just before enqueuing it. Then, if the callback returns false, the event will be discarded. No watch is using the callback for now, though. This is part of XSA-349 Cc: stable@vger.kernel.org Signed-off-by: SeongJae Park <sjpark@amazon.de> Reported-by: Michael Kurth <mku@amazon.de> Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-12-09xen: don't use page->lru for ZONE_DEVICE memoryJuergen Gross1-0/+4
Commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") introduced usage of ZONE_DEVICE memory for foreign memory mappings. Unfortunately this collides with using page->lru for Xen backend private page caches. Fix that by using page->zone_device_data instead. Cc: <stable@vger.kernel.org> # 5.9 Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com> Reviewed-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-12-09xen: add helpers for caching grant mapping pagesJuergen Gross1-0/+13
Instead of having similar helpers in multiple backend drivers use common helpers for caching pages allocated via gnttab_alloc_pages(). Make use of those helpers in blkback and scsiback. Cc: <stable@vger.kernel.org> # 5.9 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-10-25Merge tag 'for-linus-5.10b-rc1c-tag' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants
2020-10-23xen: remove no longer used functionsJuergen Gross1-8/+0
With the switch to the lateeoi model for interdomain event channels some functions are no longer in use. Remove them. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20201022094907.28560-2-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-20Merge tag 'for-linus-5.10b-rc1b-tag' of ↵Linus Torvalds1-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - A single patch to fix the Xen security issue XSA-331 (malicious guests can DoS dom0 by triggering NULL-pointer dereferences or access to stale data). - A larger series to fix the Xen security issue XSA-332 (malicious guests can DoS dom0 by sending events at high frequency leading to dom0's vcpus being busy in IRQ handling for elongated times). * tag 'for-linus-5.10b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: block rogue events for some time xen/events: defer eoi in case of excessive number of events xen/events: use a common cpu hotplug hook for event channels xen/events: switch user event channels to lateeoi model xen/pciback: use lateeoi irq binding xen/pvcallsback: use lateeoi irq binding xen/scsiback: use lateeoi irq binding xen/netback: use lateeoi irq binding xen/blkback: use lateeoi irq binding xen/events: add a new "late EOI" evtchn framework xen/events: fix race in evtchn_fifo_unmask() xen/events: add a proper barrier to 2-level uevent unmasking xen/events: avoid removing an event channel while handling it
2020-10-20xen/events: add a new "late EOI" evtchn frameworkJuergen Gross1-0/+21
In order to avoid tight event channel related IRQ loops add a new framework of "late EOI" handling: the IRQ the event channel is bound to will be masked until the event has been handled and the related driver is capable to handle another event. The driver is responsible for unmasking the event channel via the new function xen_irq_lateeoi(). This is similar to binding an event channel to a threaded IRQ, but without having to structure the driver accordingly. In order to support a future special handling in case a rogue guest is sending lots of unsolicited events, add a flag to xen_irq_lateeoi() which can be set by the caller to indicate the event was a spurious one. This is part of XSA-332. Cc: stable@vger.kernel.org Reported-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Wei Liu <wl@xen.org>
2020-10-07arm/arm64: xen: Fix to convert percpu address to gfn correctlyMasami Hiramatsu1-0/+3
Use per_cpu_ptr_to_phys() instead of virt_to_phys() for per-cpu address conversion. In xen_starting_cpu(), per-cpu xen_vcpu_info address is converted to gfn by virt_to_gfn() macro. However, since the virt_to_gfn(v) assumes the given virtual address is in linear mapped kernel memory area, it can not convert the per-cpu memory if it is allocated on vmalloc area. This depends on CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK. If it is enabled, the first chunk of percpu memory is linear mapped. In the other case, that is allocated from vmalloc area. Moreover, if the first chunk of percpu has run out until allocating xen_vcpu_info, it will be allocated on the 2nd chunk, which is based on kernel memory or vmalloc memory (depends on CONFIG_NEED_PER_CPU_KM). Without this fix and kernel configured to use vmalloc area for the percpu memory, the Dom0 kernel will fail to boot with following errors. [ 0.466172] Xen: initializing cpu0 [ 0.469601] ------------[ cut here ]------------ [ 0.474295] WARNING: CPU: 0 PID: 1 at arch/arm64/xen/../../arm/xen/enlighten.c:153 xen_starting_cpu+0x160/0x180 [ 0.484435] Modules linked in: [ 0.487565] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #4 [ 0.493895] Hardware name: Socionext Developer Box (DT) [ 0.499194] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) [ 0.504836] pc : xen_starting_cpu+0x160/0x180 [ 0.509263] lr : xen_starting_cpu+0xb0/0x180 [ 0.513599] sp : ffff8000116cbb60 [ 0.516984] x29: ffff8000116cbb60 x28: ffff80000abec000 [ 0.522366] x27: 0000000000000000 x26: 0000000000000000 [ 0.527754] x25: ffff80001156c000 x24: fffffdffbfcdb600 [ 0.533129] x23: 0000000000000000 x22: 0000000000000000 [ 0.538511] x21: ffff8000113a99c8 x20: ffff800010fe4f68 [ 0.543892] x19: ffff8000113a9988 x18: 0000000000000010 [ 0.549274] x17: 0000000094fe0f81 x16: 00000000deadbeef [ 0.554655] x15: ffffffffffffffff x14: 0720072007200720 [ 0.560037] x13: 0720072007200720 x12: 0720072007200720 [ 0.565418] x11: 0720072007200720 x10: 0720072007200720 [ 0.570801] x9 : ffff8000100fbdc0 x8 : ffff800010715208 [ 0.576182] x7 : 0000000000000054 x6 : ffff00001b790f00 [ 0.581564] x5 : ffff800010bbf880 x4 : 0000000000000000 [ 0.586945] x3 : 0000000000000000 x2 : ffff80000abec000 [ 0.592327] x1 : 000000000000002f x0 : 0000800000000000 [ 0.597716] Call trace: [ 0.600232] xen_starting_cpu+0x160/0x180 [ 0.604309] cpuhp_invoke_callback+0xac/0x640 [ 0.608736] cpuhp_issue_call+0xf4/0x150 [ 0.612728] __cpuhp_setup_state_cpuslocked+0x128/0x2c8 [ 0.618030] __cpuhp_setup_state+0x84/0xf8 [ 0.622192] xen_guest_init+0x324/0x364 [ 0.626097] do_one_initcall+0x54/0x250 [ 0.630003] kernel_init_freeable+0x12c/0x2c8 [ 0.634428] kernel_init+0x1c/0x128 [ 0.637988] ret_from_fork+0x10/0x18 [ 0.641635] ---[ end trace d95b5309a33f8b27 ]--- [ 0.646337] ------------[ cut here ]------------ [ 0.651005] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:158! [ 0.657697] Internal error: Oops - BUG: 0 [#1] SMP [ 0.662548] Modules linked in: [ 0.665676] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.9.0-rc4+ #4 [ 0.673398] Hardware name: Socionext Developer Box (DT) [ 0.678695] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) [ 0.684338] pc : xen_starting_cpu+0x178/0x180 [ 0.688765] lr : xen_starting_cpu+0x144/0x180 [ 0.693188] sp : ffff8000116cbb60 [ 0.696573] x29: ffff8000116cbb60 x28: ffff80000abec000 [ 0.701955] x27: 0000000000000000 x26: 0000000000000000 [ 0.707344] x25: ffff80001156c000 x24: fffffdffbfcdb600 [ 0.712718] x23: 0000000000000000 x22: 0000000000000000 [ 0.718107] x21: ffff8000113a99c8 x20: ffff800010fe4f68 [ 0.723481] x19: ffff8000113a9988 x18: 0000000000000010 [ 0.728863] x17: 0000000094fe0f81 x16: 00000000deadbeef [ 0.734245] x15: ffffffffffffffff x14: 0720072007200720 [ 0.739626] x13: 0720072007200720 x12: 0720072007200720 [ 0.745008] x11: 0720072007200720 x10: 0720072007200720 [ 0.750390] x9 : ffff8000100fbdc0 x8 : ffff800010715208 [ 0.755771] x7 : 0000000000000054 x6 : ffff00001b790f00 [ 0.761153] x5 : ffff800010bbf880 x4 : 0000000000000000 [ 0.766534] x3 : 0000000000000000 x2 : 00000000deadbeef [ 0.771916] x1 : 00000000deadbeef x0 : ffffffffffffffea [ 0.777304] Call trace: [ 0.779819] xen_starting_cpu+0x178/0x180 [ 0.783898] cpuhp_invoke_callback+0xac/0x640 [ 0.788325] cpuhp_issue_call+0xf4/0x150 [ 0.792317] __cpuhp_setup_state_cpuslocked+0x128/0x2c8 [ 0.797619] __cpuhp_setup_state+0x84/0xf8 [ 0.801779] xen_guest_init+0x324/0x364 [ 0.805683] do_one_initcall+0x54/0x250 [ 0.809590] kernel_init_freeable+0x12c/0x2c8 [ 0.814016] kernel_init+0x1c/0x128 [ 0.817583] ret_from_fork+0x10/0x18 [ 0.821226] Code: d0006980 f9427c00 cb000300 17ffffea (d4210000) [ 0.827415] ---[ end trace d95b5309a33f8b28 ]--- [ 0.832076] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.839815] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/160196697165.60224.17470743378683334995.stgit@devnote2 Signed-off-by: Juergen Gross <jgross@suse.com>
2020-09-06Merge tag 'for-linus-5.9-rc4-tag' of ↵Linus Torvalds2-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "A small series for fixing a problem with Xen PVH guests when running as backends (e.g. as dom0). Mapping other guests' memory is now working via ZONE_DEVICE, thus not requiring to abuse the memory hotplug functionality for that purpose" * tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: add helpers to allocate unpopulated memory memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC xen/balloon: add header guard
2020-09-04xen: add helpers to allocate unpopulated memoryRoger Pau Monne1-0/+9
To be used in order to create foreign mappings. This is based on the ZONE_DEVICE facility which is used by persistent memory devices in order to create struct pages and kernel virtual mappings for the IOMEM areas of such devices. Note that on kernels without support for ZONE_DEVICE Xen will fallback to use ballooned pages in order to create foreign mappings. The newly added helpers use the same parameters as the existing {alloc/free}_xenballooned_pages functions, which allows for in-place replacement of the callers. Once a memory region has been added to be used as scratch mapping space it will no longer be released, and pages returned are kept in a linked list. This allows to have a buffer of pages and prevents resorting to frequent additions and removals of regions. If enabled (because ZONE_DEVICE is supported) the usage of the new functionality untangles Xen balloon and RAM hotplug from the usage of unpopulated physical memory ranges to map foreign pages, which is the correct thing to do in order to avoid mappings of foreign pages depend on memory hotplug. Note the driver is currently not enabled on Arm platforms because it would interfere with the identity mapping required on some platforms. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200901083326.21264-4-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-09-04xen/balloon: add header guardRoger Pau Monne1-0/+4
In order to protect against the header being included multiple times on the same compilation unit. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20200901083326.21264-2-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-29Merge tag 'for-linus-5.9-rc3-tag' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two fixes for Xen: one needed for ongoing work to support virtio with Xen, and one for a corner case in IRQ handling with Xen" * tag 'for-linus-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: Add misuse warning to virt_to_gfn xen/xenbus: Fix granting of vmalloc'd memory XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.
2020-08-27arm/xen: Add misuse warning to virt_to_gfnSimon Leiner1-1/+5
As virt_to_gfn uses virt_to_phys, it will return invalid addresses when used with vmalloc'd addresses. This patch introduces a warning, when virt_to_gfn is used in this way. Signed-off-by: Simon Leiner <simon@leiner.me> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-2-simon@leiner.me Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-14Merge tag 'for-linus-5.9-rc1b-tag' of ↵Linus Torvalds1-3/+88
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - Remove support for running as 32-bit Xen PV-guest. 32-bit PV guests are rarely used, are lacking security fixes for Meltdown, and can be easily replaced by PVH mode. Another series for doing more cleanup will follow soon (removal of 32-bit-only pvops functionality). - Fixes and additional features for the Xen display frontend driver. * tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: drm/xen-front: Pass dumb buffer data offset to the backend xen: Sync up with the canonical protocol definition in Xen drm/xen-front: Add YUYV to supported formats drm/xen-front: Fix misused IS_ERR_OR_NULL checks xen/gntdev: Fix dmabuf import with non-zero sgt offset x86/xen: drop tests for highmem in pv code x86/xen: eliminate xen-asm_64.S x86/xen: remove 32-bit Xen PV guest support
2020-08-13xen: Sync up with the canonical protocol definition in XenOleksandr Andrushchenko1-3/+88
This is the sync up with the canonical definition of the display protocol in Xen. 1. Add protocol version as an integer Version string, which is in fact an integer, is hard to handle in the code that supports different protocol versions. To simplify that also add the version as an integer. 2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE There are cases when display data buffer is created with non-zero offset to the data start. Handle such cases and provide that offset while creating a display buffer. 3. Add XENDISPL_OP_GET_EDID command Add an optional request for reading Extended Display Identification Data (EDID) structure which allows better configuration of the display connectors over the configuration set in XenStore. With this change connectors may have multiple resolutions defined with respect to detailed timing definitions and additional properties normally provided by displays. If this request is not supported by the backend then visible area is defined by the relevant XenStore's "resolution" property. If backend provides extended display identification data (EDID) with XENDISPL_OP_GET_EDID request then EDID values must take precedence over the resolutions defined in XenStore. 4. Bump protocol version to 2. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200813062113.11030-5-andr2000@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-07Merge tag 'for-linus-5.9-rc1-tag' of ↵Linus Torvalds2-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - two trivial comment fixes - a small series for the Xen balloon driver fixing some issues - a series of the Xen privcmd driver targeting elimination of using get_user_pages*() in this driver - a series for the Xen swiotlb driver cleaning it up and adding support for letting the kernel run as dom0 on Rpi4 * tag 'for-linus-5.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maint xen/arm: introduce phys/dma translations in xen_dma_sync_for_* swiotlb-xen: introduce phys_to_dma/dma_to_phys translations swiotlb-xen: remove XEN_PFN_PHYS swiotlb-xen: add struct device * parameter to is_xen_swiotlb_buffer swiotlb-xen: add struct device * parameter to xen_dma_sync_for_device swiotlb-xen: add struct device * parameter to xen_dma_sync_for_cpu swiotlb-xen: add struct device * parameter to xen_bus_to_phys swiotlb-xen: add struct device * parameter to xen_phys_to_bus swiotlb-xen: remove start_dma_addr swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses Revert "xen/balloon: Fix crash when ballooning on x86 32 bit PAE" xen/balloon: make the balloon wait interruptible xen/balloon: fix accounting in alloc_xenballooned_pages error path xen: hypercall.h: fix duplicated word xen/gntdev: gntdev.h: drop a duplicated word xen/privcmd: Convert get_user_pages*() to pin_user_pages*() xen/privcmd: Mark pages as dirty xen/privcmd: Corrected error handling path
2020-08-04xen/arm: introduce phys/dma translations in xen_dma_sync_for_*Stefano Stabellini1-4/+2
xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are getting called passing dma addresses. On some platforms dma addresses could be different from physical addresses. Before doing any operations on these addresses we need to convert them back to physical addresses using dma_to_phys. Move the arch_sync_dma_for_cpu and arch_sync_dma_for_device calls from xen_dma_sync_for_cpu/device to swiotlb-xen.c, and add a call dma_to_phys to do address translations there. dma_cache_maint is fixed by the next patch. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200710223427.6897-10-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: remove XEN_PFN_PHYSStefano Stabellini1-1/+0
XEN_PFN_PHYS is only used in one place in swiotlb-xen making things more complex than need to be. Remove the definition of XEN_PFN_PHYS and open code the cast in the one place where it is needed. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200710223427.6897-8-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to xen_dma_sync_for_deviceStefano Stabellini1-2/+3
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-6-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to xen_dma_sync_for_cpuStefano Stabellini1-2/+3
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-5-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-07-01xen: netif.h: add a new extra type for XDPDenis Kirjanov1-1/+19
The patch adds a new extra type to be able to diffirentiate between RX responses on xen-netfront side with the adjusted offset required for XDP processing. The offset value from a guest is passed via xenstore. Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11xen: Move xen_setup_callback_vector() definition to include/xen/hvm.hVitaly Kuznetsov2-0/+4
Kbuild test robot reports the following problem on ARM: for 'xen_setup_callback_vector' [-Wmissing-prototypes] 1664 | void xen_setup_callback_vector(void) {} | ^~~~~~~~~~~~~~~~~~~~~~~~~ The problem is that xen_setup_callback_vector is a x86 only thing, its definition is present in arch/x86/xen/xen-ops.h but not on ARM. In events_base.c there is a stub for !CONFIG_XEN_PVHVM but it is not declared as 'static'. On x86 the situation is hardly better: drivers/xen/events/events_base.c doesn't include 'xen-ops.h' from arch/x86/xen/, it includes its namesake from include/xen/ which also results in a 'no previous prototype' warning. Currently, xen_setup_callback_vector() has two call sites: one in drivers/xen/events_base.c and another in arch/x86/xen/suspend_hvm.c. The former is placed under #ifdef CONFIG_X86 and the later is only compiled in when CONFIG_XEN_PVHVM. Resolve the issue by moving xen_setup_callback_vector() declaration to arch neutral 'include/xen/hvm.h' as the implementation lives in arch neutral drivers/xen/events/events_base.c. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lkml.kernel.org/r/20200520161600.361895-1-vkuznets@redhat.com
2020-06-11x86/entry: Convert XEN hypercall vector to IDTENTRY_SYSVECThomas Gleixner1-7/+0
Convert the last oldstyle defined vector to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes Fixup the related XEN code by providing the primary C entry point in x86 to avoid cluttering the generic code with X86'isms. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20200521202119.741950104@linutronix.de
2020-06-11x86/entry: Switch XEN/PV hypercall entry to IDTENTRYThomas Gleixner1-12/+7
Convert the XEN/PV hypercall to IDTENTRY: - Emit the ASM stub with DECLARE_IDTENTRY - Remove the ASM idtentry in 64-bit - Remove the open coded ASM entry code in 32-bit - Remove the old prototypes The handler stubs need to stay in ASM code as they need corner case handling and adjustment of the stack pointer. Provide a new C function which invokes the entry/exit handling and calls into the XEN handler on the interrupt stack if required. The exit code is slightly different from the regular idtentry_exit() on non-preemptible kernels. If the hypercall is preemptible and need_resched() is set then XEN provides a preempt hypercall scheduling function. Move this functionality into the entry code so it can use the existing idtentry functionality. [ mingo: Build fixes. ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> Tested-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200521202118.055270078@linutronix.de
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport1-1/+1
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport1-1/+1
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07xen: Use evtchn_type_t as a type for event channelsYan Yankovskyi3-14/+15
Make event channel functions pass event channel port using evtchn_port_t type. It eliminates signed <-> unsigned conversion. Signed-off-by: Yan Yankovskyi <yyankovskyi@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20200323152343.GA28422@kbp1-lhp-F74019 Signed-off-by: Juergen Gross <jgross@suse.com>
2020-03-30xen/xenbus: remove unused xenbus_map_ring()Juergen Gross1-7/+0
xenbus_map_ring() is used nowhere in the tree, remove it. xenbus_unmap_ring() is used only locally, so make it static and move it up. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-03-05xen/xenbus: fix lockingJuergen Gross1-1/+2
Commit 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") introduced a bug by holding a lock while calling a function which might schedule. Fix that by using a semaphore instead. Fixes: 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200305100323.16736-1-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-03-05xen: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200226212612.GA4663@embeddedor Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-02-05Merge tag 'for-linus-5.6-rc1-tag' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - fix a bug introduced in 5.5 in the Xen gntdev driver - fix the Xen balloon driver when running on ancient Xen versions - allow Xen stubdoms to control interrupt enable flags of passed-through PCI cards - release resources in Xen backends under memory pressure * tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/blkback: Consistently insert one empty line between functions xen/blkback: Remove unnecessary static variable name prefixes xen/blkback: Squeeze page pools if a memory pressure is detected xenbus/backend: Protect xenbus callback with lock xenbus/backend: Add memory pressure handler callback xen/gntdev: Do not use mm notifiers with autotranslating guests xen/balloon: Support xend-based toolstack take two xen-pciback: optionally allow interrupt enable flag writes
2020-01-29xenbus/backend: Protect xenbus callback with lockSeongJae Park1-0/+1
A driver's 'reclaim_memory' callback can race with 'probe' or 'remove' because it will be called whenever memory pressure is detected. To avoid such race, this commit embeds a spinlock in each 'xenbus_device' and make 'xenbus' to hold the lock while the corresponded callbacks are running. Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-01-29xenbus/backend: Add memory pressure handler callbackSeongJae Park1-0/+1
Granting pages consumes backend system memory. In systems configured with insufficient spare memory for those pages, it can cause a memory pressure situation. However, finding the optimal amount of the spare memory is challenging for large systems having dynamic resource utilization patterns. Also, such a static configuration might lack flexibility. To mitigate such problems, this commit adds a memory reclaim callback to 'xenbus_driver'. If a memory pressure is detected, 'xenbus' requests every backend driver to volunarily release its memory. Note that it would be able to improve the callback facility for more sophisticated handlings of general pressures. For example, it would be possible to monitor the memory consumption of each device and issue the release requests to only devices which causing the pressure. Also, the callback could be extended to handle not only memory, but general resources. Nevertheless, this version of the implementation defers such sophisticated goals as a future work. Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-12-25Merge tag 'v5.5-rc3' into sched/core, to pick up fixesIngo Molnar2-20/+10
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-20xen/interface: re-define FRONT/BACK_RING_ATTACH()Paul Durrant1-20/+9
Currently these macros are defined to re-initialize a front/back ring (respectively) to values read from the shared ring in such a way that any requests/responses that are added to the shared ring whilst the front/back is detached will be skipped over. This, in general, is not a desirable semantic since most frontend implementations will eventually block waiting for a response which would either never appear or never be processed. Since the macros are currently unused, take this opportunity to re-define them to re-initialize a front/back ring using specified values. This also allows FRONT/BACK_RING_INIT() to be re-defined in terms of FRONT/BACK_RING_ATTACH() using a specified value of 0. NOTE: BACK_RING_ATTACH() will be used directly in a subsequent patch. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-20xenbus: limit when state is forced to closedPaul Durrant1-0/+1
If a driver probe() fails then leave the xenstore state alone. There is no reason to modify it as the failure may be due to transient resource allocation issues and hence a subsequent probe() may succeed. If the driver supports re-binding then only force state to closed during remove() only in the case when the toolstack may need to clean up. This can be detected by checking whether the state in xenstore has been set to closing prior to device removal. NOTE: Re-bind support is indicated by new boolean in struct xenbus_driver, which defaults to false. Subsequent patches will add support to some backend drivers. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-08sched/rt, xen: Use CONFIG_PREEMPTIONThomas Gleixner1-2/+2
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the preempt anand xen-ops code over to use CONFIG_PREEMPTION. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: xen-devel@lists.xenproject.org Link: https://lore.kernel.org/r/20191015191821.11479-23-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-28Merge branch 'master' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 17:10:00 +0000