| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Andrew Perepechko reported a problem whereby pages are being prematurely
evicted as the mark_page_accessed() hint is ignored for pages that are
currently on a pagevec --
http://www.spinics.net/lists/linux-ext4/msg37340.html .
Alexey Lyahkov and Robin Dong have also reported problems recently that
could be due to hot pages reaching the end of the inactive list too
quickly and be reclaimed.
Rather than addressing this on a per-filesystem basis, this series aims
to fix the mark_page_accessed() interface by deferring what LRU a page
is added to pagevec drain time and allowing mark_page_accessed() to call
SetPageActive on a pagevec page.
Patch 1 adds two tracepoints for LRU page activation and insertion. Using
these processes it's possible to build a model of pages in the
LRU that can be processed offline.
Patch 2 defers making the decision on what LRU to add a page to until when
the pagevec is drained.
Patch 3 searches the local pagevec for pages to mark PageActive on
mark_page_accessed. The changelog explains why only the local
pagevec is examined.
Patches 4 and 5 tidy up the API.
postmark, a dd-based test and fs-mark both single and threaded mode were
run but none of them showed any performance degradation or gain as a
result of the patch.
Using patch 1, I built a *very* basic model of the LRU to examine
offline what the average age of different page types on the LRU were in
milliseconds. Of course, capturing the trace distorts the test as it's
written to local disk but it does not matter for the purposes of this
test. The average age of pages in milliseconds were
vanilla deferdrain
Average age mapped anon: 1454 1250
Average age mapped file: 127841 155552
Average age unmapped anon: 85 235
Average age unmapped file: 73633 38884
Average age unmapped buffers: 74054 116155
The LRU activity was mostly files which you'd expect for a dd-based
workload. Note that the average age of buffer pages is increased by the
series and it is expected this is due to the fact that the buffer pages
are now getting added to the active list when drained from the pagevecs.
Note that the average age of the unmapped file data is decreased as they
are still added to the inactive list and are reclaimed before the
buffers.
There is no guarantee this is a universal win for all workloads and it
would be nice if the filesystem people gave some thought as to whether
this decision is generally a win or a loss.
This patch:
Using these tracepoints it is possible to model LRU activity and the
average residency of pages of different types. This can be used to
debug problems related to premature reclaim of pages of particular
types.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tracing updates from Ingo Molnar:
"This tree adds IRQ vector tracepoints that are named after the handler
and which output the vector #, based on a zero-overhead approach that
relies on changing the IDT entries, by Seiji Aguchi.
The new tracepoints look like this:
# perf list | grep -i irq_vector
irq_vectors:local_timer_entry [Tracepoint event]
irq_vectors:local_timer_exit [Tracepoint event]
irq_vectors:reschedule_entry [Tracepoint event]
irq_vectors:reschedule_exit [Tracepoint event]
irq_vectors:spurious_apic_entry [Tracepoint event]
irq_vectors:spurious_apic_exit [Tracepoint event]
irq_vectors:error_apic_entry [Tracepoint event]
irq_vectors:error_apic_exit [Tracepoint event]
[...]"
* 'x86-tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tracing: Add config option checking to the definitions of mce handlers
trace,x86: Do not call local_irq_save() in load_current_idt()
trace,x86: Move creation of irq tracepoints from apic.c to irq.c
x86, trace: Add irq vector tracepoints
x86: Rename variables for debugging
x86, trace: Introduce entering/exiting_irq()
tracing: Add DEFINE_EVENT_FN() macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel improvements:
- watchdog driver improvements by Li Zefan
- Power7 CPI stack events related improvements by Sukadev Bhattiprolu
- event multiplexing via hrtimers and other improvements by Stephane
Eranian
- kernel stack use optimization by Andrew Hunter
- AMD IOMMU uncore PMU support by Suravee Suthikulpanit
- NMI handling rate-limits by Dave Hansen
- various hw_breakpoint fixes by Oleg Nesterov
- hw_breakpoint overflow period sampling and related signal handling
fixes by Jiri Olsa
- Intel Haswell PMU support by Andi Kleen
Tooling improvements:
- Reset SIGTERM handler in workload child process, fix from David
Ahern.
- Makefile reorganization, prep work for Kconfig patches, from Jiri
Olsa.
- Add automated make test suite, from Jiri Olsa.
- Add --percent-limit option to 'top' and 'report', from Namhyung
Kim.
- Sorting improvements, from Namhyung Kim.
- Expand definition of sysfs format attribute, from Michael Ellerman.
Tooling fixes:
- 'perf tests' fixes from Jiri Olsa.
- Make Power7 CPI stack events available in sysfs, from Sukadev
Bhattiprolu.
- Handle death by SIGTERM in 'perf record', fix from David Ahern.
- Fix printing of perf_event_paranoid message, from David Ahern.
- Handle realloc failures in 'perf kvm', from David Ahern.
- Fix divide by 0 in variance, from David Ahern.
- Save parent pid in thread struct, from David Ahern.
- Handle JITed code in shared memory, from Andi Kleen.
- Fixes for 'perf diff', from Jiri Olsa.
- Remove some unused struct members, from Jiri Olsa.
- Add missing liblk.a dependency for python/perf.so, fix from Jiri
Olsa.
- Respect CROSS_COMPILE in liblk.a, from Rabin Vincent.
- No need to do locking when adding hists in perf report, only 'top'
needs that, from Namhyung Kim.
- Fix alignment of symbol column in in the hists browser (top,
report) when -v is given, from NAmhyung Kim.
- Fix 'perf top' -E option behavior, from Namhyung Kim.
- Fix bug in isupper() and islower(), from Sukadev Bhattiprolu.
- Fix compile errors in bp_signal 'perf test', from Sukadev
Bhattiprolu.
... and more things"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (102 commits)
perf/x86: Disable PEBS-LL in intel_pmu_pebs_disable()
perf/x86: Fix shared register mutual exclusion enforcement
perf/x86/intel: Support full width counting
x86: Add NMI duration tracepoints
perf: Drop sample rate when sampling is too slow
x86: Warn when NMI handlers take large amounts of time
hw_breakpoint: Introduce "struct bp_cpuinfo"
hw_breakpoint: Simplify *register_wide_hw_breakpoint()
hw_breakpoint: Introduce cpumask_of_bp()
hw_breakpoint: Simplify the "weight" usage in toggle_bp_slot() paths
hw_breakpoint: Simplify list/idx mess in toggle_bp_slot() paths
perf/x86/intel: Add mem-loads/stores support for Haswell
perf/x86/intel: Support Haswell/v4 LBR format
perf/x86/intel: Move NMI clearing to end of PMI handler
perf/x86/intel: Add Haswell PEBS support
perf/x86/intel: Add simple Haswell PMU support
perf/x86/intel: Add Haswell PEBS record support
perf/x86/intel: Fix sparse warning
perf/x86/amd: AMD IOMMU Performance Counter PERF uncore PMU implementation
perf/x86/amd: Add IOMMU Performance Counter resource management
...
|
|
Translate the bitfields used in various flags argument to strings to
make the tracepoint output more human-readable.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This patch has been invaluable in my adventures finding
issues in the perf NMI handler. I'm as big a fan of
printk() as anybody is, but using printk() in NMIs is
deadly when they're happening frequently.
Even hacking in trace_printk() ended up eating enough
CPU to throw off some of the measurements I was making.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Each TRACE_EVENT() adds several helper functions. If two or more trace events
share the same structure and print format, they can also share most of these
helper functions and save a lot of space from duplicate code. This is why the
DECLARE_EVENT_CLASS() and DEFINE_EVENT() were created.
Some events require a trigger to be called at registering and unregistering of
the event and to do so they use TRACE_EVENT_FN().
If multiple events require a trigger, they currently have no choice but to use
TRACE_EVENT_FN() as there's no DEFINE_EVENT_FN() available. This unfortunately
causes a lot of wasted duplicate code created.
By adding a DEFINE_EVENT_FN(), these events can still use a
DECLARE_EVENT_CLASS() and then define their own triggers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/51C3236C.8030508@hds.com
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Rename ext4_da_writepages() to ext4_writepages() and use it for all
modes. We still need to iterate over all the pages in the case of
data=journalling, but in the case of nodelalloc/data=ordered (which is
what file systems mounted using ext3 backwards compatibility will use)
this will allow us to use a much more efficient I/O submission path.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
There are two issues with current writeback path in ext4. For one we
don't necessarily map complete pages when blocksize < pagesize and
thus needn't do any writeback in one iteration. We always map some
blocks though so we will eventually finish mapping the page. Just if
writeback races with other operations on the file, forward progress is
not really guaranteed. The second problem is that current code
structure makes it hard to associate all the bios to some range of
pages with one io_end structure so that unwritten extents can be
converted after all the bios are finished. This will be especially
difficult later when io_end will be associated with reserved
transaction handle.
We restructure the writeback path to a relatively simple loop which
first prepares extent of pages, then maps one or more extents so that
no page is partially mapped, and once page is fully mapped it is
submitted for IO. We keep all the mapping and IO submission
information in mpage_da_data structure to somewhat reduce stack usage.
Resulting code is somewhat shorter than the old one and hopefully also
easier to read.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Currently punch hole is disabled in file systems with bigalloc
feature enabled. However the recent changes in punch hole patch should
make it easier to support punching holes on bigalloc enabled file
systems.
This commit changes partial_cluster handling in ext4_remove_blocks(),
ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently
partial_cluster is unsigned long long type and it makes sure that we
will free the partial cluster if all extents has been released from that
cluster. However it has been specifically designed only for truncate.
With punch hole we can be freeing just some extents in the cluster
leaving the rest untouched. So we have to make sure that we will notice
cluster which still has some extents. To do this I've changed
partial_cluster to be signed long long type. The only scenario where
this could be a problem is when cluster_size == block size, however in
that case there would not be any partial clusters so we're safe. For
bigger clusters the signed type is enough. Now we use the negative value
in partial_cluster to mark such cluster used, hence we know that we must
not free it even if all other extents has been freed from such cluster.
This scenario can be described in simple diagram:
|FFF...FF..FF.UUU|
^----------^
punch hole
. - free space
| - cluster boundary
F - freed extent
U - used extent
Also update respective tracepoints to use signed long long type for
partial_cluster.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add "end" variable.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
->invalidatepage() aop now accepts range to invalidate so we can make
use of it in journal_invalidatepage() and all the users in ext3 file
system. Also update ext3 trace point to print out length argument.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
->invalidatepage() aop now accepts range to invalidate so we can make
use of it in all ext4 invalidatepage routines.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Fixed regressions (two stability regressions and a performance
regression) introduced during the 3.10-rc1 merge window.
Also included is a bug fix relating to allocating blocks after
resizing an ext3 file system when using the ext4 file system driver"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd,jbd2: fix oops in jbd2_journal_put_journal_head()
ext4: revert "ext4: use io_end for multiple bios"
ext4: limit group search loop for non-extent files
ext4: fix fio regression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This patch-set includes the following major enhancement patches.
- introduce a new gloabl lock scheme
- add tracepoints on several major functions
- fix the overall cleaning process focused on victim selection
- apply the block plugging to merge IOs as much as possible
- enhance management of free nids and its list
- enhance the readahead mode for node pages
- address several cretical deadlock conditions
- reduce lock_page calls
The other minor bug fixes and enhancements are as follows.
- calculation mistakes: overflow
- bio types: READ, READA, and READ_SYNC
- fix the recovery flow, data races, and null pointer errors"
* tag 'f2fs-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits)
f2fs: cover free_nid management with spin_lock
f2fs: optimize scan_nat_page()
f2fs: code cleanup for scan_nat_page() and build_free_nids()
f2fs: bugfix for alloc_nid_failed()
f2fs: recover when journal contains deleted files
f2fs: continue to mount after failing recovery
f2fs: avoid deadlock during evict after f2fs_gc
f2fs: modify the number of issued pages to merge IOs
f2fs: remove useless #include <linux/proc_fs.h> as we're now using sysfs as debug entry.
f2fs: fix inconsistent using of NM_WOUT_THRESHOLD
f2fs: check truncation of mapping after lock_page
f2fs: enhance alloc_nid and build_free_nids flows
f2fs: add a tracepoint on f2fs_new_inode
f2fs: check nid == 0 in add_free_nid
f2fs: add REQ_META about metadata requests for submit
f2fs: give a chance to merge IOs by IO scheduler
f2fs: avoid frequent background GC
f2fs: add tracepoints to debug checkpoint request
f2fs: add tracepoints for write page operations
f2fs: add tracepoints to debug the block allocation
...
|
|
Pull block driver updates from Jens Axboe:
"It might look big in volume, but when categorized, not a lot of
drivers are touched. The pull request contains:
- mtip32xx fixes from Micron.
- A slew of drbd updates, this time in a nicer series.
- bcache, a flash/ssd caching framework from Kent.
- Fixes for cciss"
* 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits)
bcache: Use bd_link_disk_holder()
bcache: Allocator cleanup/fixes
cciss: bug fix to prevent cciss from loading in kdump crash kernel
cciss: add cciss_allow_hpsa module parameter
drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions
mtip32xx: Workaround for unaligned writes
bcache: Make sure blocksize isn't smaller than device blocksize
bcache: Fix merge_bvec_fn usage for when it modifies the bvm
bcache: Correctly check against BIO_MAX_PAGES
bcache: Hack around stuff that clones up to bi_max_vecs
bcache: Set ra_pages based on backing device's ra_pages
bcache: Take data offset from the bdev superblock.
mtip32xx: mtip32xx: Disable TRIM support
mtip32xx: fix a smatch warning
bcache: Disable broken btree fuzz tester
bcache: Fix a format string overflow
bcache: Fix a minor memory leak on device teardown
bcache: Documentation updates
bcache: Use WARN_ONCE() instead of __WARN()
bcache: Add missing #include <linux/prefetch.h>
...
|
|
Pull block core updates from Jens Axboe:
- Major bit is Kents prep work for immutable bio vecs.
- Stable candidate fix for a scheduling-while-atomic in the queue
bypass operation.
- Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging
discard bios.
- Tejuns changes to convert the writeback thread pool to the generic
workqueue mechanism.
- Runtime PM framework, SCSI patches exists on top of these in James'
tree.
- A few random fixes.
* 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits)
relay: move remove_buf_file inside relay_close_buf
partitions/efi.c: replace useless kzalloc's by kmalloc's
fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read()
block: fix max discard sectors limit
blkcg: fix "scheduling while atomic" in blk_queue_bypass_start
Documentation: cfq-iosched: update documentation help for cfq tunables
writeback: expose the bdi_wq workqueue
writeback: replace custom worker pool implementation with unbound workqueue
writeback: remove unused bdi_pending_list
aoe: Fix unitialized var usage
bio-integrity: Add explicit field for owner of bip_buf
block: Add an explicit bio flag for bios that own their bvec
block: Add bio_alloc_pages()
block: Convert some code to bio_for_each_segment_all()
block: Add bio_for_each_segment_all()
bounce: Refactor __blk_queue_bounce to not use bi_io_vec
raid1: use bio_copy_data()
pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage
pktcdvd: use bio_copy_data()
block: Add bio_copy_data()
...
|
|
Pull kvm updates from Gleb Natapov:
"Highlights of the updates are:
general:
- new emulated device API
- legacy device assignment is now optional
- irqfd interface is more generic and can be shared between arches
x86:
- VMCS shadow support and other nested VMX improvements
- APIC virtualization and Posted Interrupt hardware support
- Optimize mmio spte zapping
ppc:
- BookE: in-kernel MPIC emulation with irqfd support
- Book3S: in-kernel XICS emulation (incomplete)
- Book3S: HV: migration fixes
- BookE: more debug support preparation
- BookE: e6500 support
ARM:
- reworking of Hyp idmaps
s390:
- ioeventfd for virtio-ccw
And many other bug fixes, cleanups and improvements"
* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
kvm: Add compat_ioctl for device control API
KVM: x86: Account for failing enable_irq_window for NMI window request
KVM: PPC: Book3S: Add API for in-kernel XICS emulation
kvm/ppc/mpic: fix missing unlock in set_base_addr()
kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
kvm/ppc/mpic: remove users
kvm/ppc/mpic: fix mmio region lists when multiple guests used
kvm/ppc/mpic: remove default routes from documentation
kvm: KVM_CAP_IOMMU only available with device assignment
ARM: KVM: iterate over all CPUs for CPU compatibility check
KVM: ARM: Fix spelling in error message
ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
KVM: ARM: Fix API documentation for ONE_REG encoding
ARM: KVM: promote vfp_host pointer to generic host cpu context
ARM: KVM: add architecture specific hook for capabilities
ARM: KVM: perform HYP initilization for hotplugged CPUs
ARM: KVM: switch to a dual-step HYP init code
ARM: KVM: rework HYP page table freeing
ARM: KVM: enforce maximum size for identity mapped code
ARM: KVM: move to a KVM provided HYP idmap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull 'full dynticks' support from Ingo Molnar:
"This tree from Frederic Weisbecker adds a new, (exciting! :-) core
kernel feature to the timer and scheduler subsystems: 'full dynticks',
or CONFIG_NO_HZ_FULL=y.
This feature extends the nohz variable-size timer tick feature from
idle to busy CPUs (running at most one task) as well, potentially
reducing the number of timer interrupts significantly.
This feature got motivated by real-time folks and the -rt tree, but
the general utility and motivation of full-dynticks runs wider than
that:
- HPC workloads get faster: CPUs running a single task should be able
to utilize a maximum amount of CPU power. A periodic timer tick at
HZ=1000 can cause a constant overhead of up to 1.0%. This feature
removes that overhead - and speeds up the system by 0.5%-1.0% on
typical distro configs even on modern systems.
- Real-time workload latency reduction: CPUs running critical tasks
should experience as little jitter as possible. The last remaining
source of kernel-related jitter was the periodic timer tick.
- A single task executing on a CPU is a pretty common situation,
especially with an increasing number of cores/CPUs, so this feature
helps desktop and mobile workloads as well.
The cost of the feature is mainly related to increased timer
reprogramming overhead when a CPU switches its tick period, and thus
slightly longer to-idle and from-idle latency.
Configuration-wise a third mode of operation is added to the existing
two NOHZ kconfig modes:
- CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named
as a config option. This is the traditional Linux periodic tick
design: there's a HZ tick going on all the time, regardless of
whether a CPU is idle or not.
- CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the
periodic tick when a CPU enters idle mode.
- CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the
tick when a CPU is idle, also slows the tick down to 1 Hz (one
timer interrupt per second) when only a single task is running on a
CPU.
The .config behavior is compatible: existing !CONFIG_NO_HZ and
CONFIG_NO_HZ=y settings get translated to the new values, without the
user having to configure anything. CONFIG_NO_HZ_FULL is turned off by
default.
This feature is based on a lot of infrastructure work that has been
steadily going upstream in the last 2-3 cycles: related RCU support
and non-periodic cputime support in particular is upstream already.
This tree adds the final pieces and activates the feature. The pull
request is marked RFC because:
- it's marked 64-bit only at the moment - the 32-bit support patch is
small but did not get ready in time.
- it has a number of fresh commits that came in after the merge
window. The overwhelming majority of commits are from before the
merge window, but still some aspects of the tree are fresh and so I
marked it RFC.
- it's a pretty wide-reaching feature with lots of effects - and
while the components have been in testing for some time, the full
combination is still not very widely used. That it's default-off
should reduce its regression abilities and obviously there are no
known regressions with CONFIG_NO_HZ_FULL=y enabled either.
- the feature is not completely idempotent: there is no 100%
equivalent replacement for a periodic scheduler/timer tick. In
particular there's ongoing work to map out and reduce its effects
on scheduler load-balancing and statistics. This should not impact
correctness though, there are no known regressions related to this
feature at this point.
- it's a pretty ambitious feature that with time will likely be
enabled by most Linux distros, and we'd like you to make input on
its design/implementation, if you dislike some aspect we missed.
Without flaming us to crisp! :-)
Future plans:
- there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off
the periodic tick altogether when there's a single busy task on a
CPU. We'd first like 1 Hz to be exposed more widely before we go
for the 0 Hz target though.
- once we reach 0 Hz we can remove the periodic tick assumption from
nr_running>=2 as well, by essentially interrupting busy tasks only
as frequently as the sched_latency constraints require us to do -
once every 4-40 msecs, depending on nr_running.
I am personally leaning towards biting the bullet and doing this in
v3.10, like the -rt tree this effort has been going on for too long -
but the final word is up to you as usual.
More technical details can be found in Documentation/timers/NO_HZ.txt"
* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
sched: Keep at least 1 tick per second for active dynticks tasks
rcu: Fix full dynticks' dependency on wide RCU nocb mode
nohz: Protect smp_processor_id() in tick_nohz_task_switch()
nohz_full: Add documentation.
cputime_nsecs: use math64.h for nsec resolution conversion helpers
nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config
nohz: Reduce overhead under high-freq idling patterns
nohz: Remove full dynticks' superfluous dependency on RCU tree
nohz: Fix unavailable tick_stop tracepoint in dynticks idle
nohz: Add basic tracing
nohz: Select wide RCU nocb for full dynticks
nohz: Disable the tick when irq resume in full dynticks CPU
nohz: Re-evaluate the tick for the new task after a context switch
nohz: Prepare to stop the tick on irq exit
nohz: Implement full dynticks kick
nohz: Re-evaluate the tick from the scheduler IPI
sched: New helper to prevent from stopping the tick in full dynticks
sched: Kick full dynticks CPU that have more than one task enqueued.
perf: New helper to prevent full dynticks CPUs from stopping tick
perf: Kick full dynticks CPU if events rotation is needed
...
|
|
We (Linux Kernel Performance project) found a regression introduced
by commit:
f7fec032aa ext4: track all extent status in extent status tree
The commit causes about 20% performance decrease in fio random write
test. Profiler shows that rb_next() uses a lot of CPU time. The call
stack is:
rb_next
ext4_es_find_delayed_extent
ext4_map_blocks
_ext4_get_block
ext4_get_block_write
__blockdev_direct_IO
ext4_direct_IO
generic_file_direct_write
__generic_file_aio_write
ext4_file_write
aio_rw_vect_retry
aio_run_iocb
do_io_submit
sys_io_submit
system_call_fastpath
io_submit
td_io_getevents
io_u_queued_complete
thread_main
main
__libc_start_main
The cause is that ext4_es_find_delayed_extent() doesn't have an
upper bound, it keeps searching until a delayed extent is found.
When there are a lots of non-delayed entries in the extent state
tree, ext4_es_find_delayed_extent() may uses a lot of CPU time.
Reported-by: LKP project <lkp@linux.intel.com>
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
|
|
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 3.10.
Wierd bits:
- OMAP drm changes required OMAP dss changes, in drivers/video, so I
took them in here.
- one more fbcon fix for font handover
- VT switch avoidance in pm code
- scatterlist helpers for gpu drivers - have acks from akpm
Highlights:
- qxl kms driver - driver for the spice qxl virtual GPU
Nouveau:
- fermi/kepler VRAM compression
- GK110/nvf0 modesetting support.
Tegra:
- host1x core merged with 2D engine support
i915:
- vt switchless resume
- more valleyview support
- vblank fixes
- modesetting pipe config rework
radeon:
- UVD engine support
- SI chip tiling support
- GPU registers initialisation from golden values.
exynos:
- device tree changes
- fimc block support
Otherwise:
- bunches of fixes all over the place."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits)
qxl: update to new idr interfaces.
drm/nouveau: fix build with nv50->nvc0
drm/radeon: fix handling of v6 power tables
drm/radeon: clarify family checks in pm table parsing
drm/radeon: consolidate UVD clock programming
drm/radeon: fix UPLL_REF_DIV_MASK definition
radeon: add bo tracking debugfs
drm/radeon: add new richland pci ids
drm/radeon: add some new SI PCI ids
drm/radeon: fix scratch reg handling for UVD fence
drm/radeon: allocate SA bo in the requested domain
drm/radeon: fix possible segfault when parsing pm tables
drm/radeon: fix endian bugs in atom_allocate_fb_scratch()
OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found
OMAPDSS: VENC: Add error handling for venc_probe_pdata
OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata
OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata
OMAPDSS: DSI: Add error handling for dsi_probe_pdata
OMAPDSS: SDI: Add error handling for sdi_probe_pdata
OMAPDSS: DPI: Add error handling for dpi_probe_pdata
...
|
|
The full dynticks tree needs the latest RCU and sched
upstream updates in order to fix some dependencies.
Merge a common upstream merge point that has these
updates.
Conflicts:
include/linux/perf_event.h
kernel/rcutree.h
kernel/rcutree_plugin.h
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Mostly performance and bug fixes, plus some cleanups. The one new
feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
allows installation of a hidden inode designed for boot loaders."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
ext4: fix type-widening bug in inode table readahead code
ext4: add check for inodes_count overflow in new resize ioctl
ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG
ext4: fix online resizing for ext3-compat file systems
jbd2: trace when lock_buffer in do_get_write_access takes a long time
ext4: mark metadata blocks using bh flags
buffer: add BH_Prio and BH_Meta flags
ext4: mark all metadata I/O with REQ_META
ext4: fix readdir error in case inline_data+^dir_index.
ext4: fix readdir error in the case of inline_data+dir_index
jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
ext4: mext_insert_extents should update extent block checksum
ext4: move quota initialization out of inode allocation transaction
ext4: reserve xattr index for Rich ACL support
jbd2: reduce journal_head size
ext4: clear buffer_uninit flag when submitting IO
ext4: use io_end for multiple bios
ext4: make ext4_bio_write_page() use BH_Async_Write flags
ext4: Use kstrtoul() instead of parse_strtoul()
ext4: defragmentation code cleanup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
code cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
mm: Convert print_symbol to %pSR
gfs2: Convert print_symbol to %pSR
m32r: Convert print_symbol to %pSR
iostats.txt: add easy-to-find description for field 6
x86 cmpxchg.h: fix wrong comment
treewide: Fix typo in printk and comments
doc: devicetree: Fix various typos
docbook: fix 8250 naming in device-drivers
pata_pdc2027x: Fix compiler warning
treewide: Fix typo in printks
mei: Fix comments in drivers/misc/mei
treewide: Fix typos in kernel messages
pm44xx: Fix comment for "CONFIG_CPU_IDLE"
doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
mmzone: correct "pags" to "pages" in comment.
kernel-parameters: remove outdated 'noresidual' parameter
Remove spurious _H suffixes from ifdef comments
sound: Remove stray pluses from Kconfig file
radio-shark: Fix printk "CONFIG_LED_CLASS"
doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle are mostly related to preparatory work
for the full-dynticks work:
- Remove restrictions on no-CBs CPUs, make RCU_FAST_NO_HZ take
advantage of numbered callbacks, do callback accelerations based on
numbered callbacks. Posted to LKML at
https://lkml.org/lkml/2013/3/18/960
- RCU documentation updates. Posted to LKML at
https://lkml.org/lkml/2013/3/18/570
- Miscellaneous fixes. Posted to LKML at
https://lkml.org/lkml/2013/3/18/594"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
rcu: Make rcu_accelerate_cbs() note need for future grace periods
rcu: Abstract rcu_start_future_gp() from rcu_nocb_wait_gp()
rcu: Rename n_nocb_gp_requests to need_future_gp
rcu: Push lock release to rcu_start_gp()'s callers
rcu: Repurpose no-CBs event tracing to future-GP events
rcu: Rearrange locking in rcu_start_gp()
rcu: Make RCU_FAST_NO_HZ take advantage of numbered callbacks
rcu: Accelerate RCU callbacks at grace-period end
rcu: Export RCU_FAST_NO_HZ parameters to sysfs
rcu: Distinguish "rcuo" kthreads by RCU flavor
rcu: Add event tracing for no-CBs CPUs' grace periods
rcu: Add event tracing for no-CBs CPUs' callback registration
rcu: Introduce proper blocking to no-CBs kthreads GP waits
rcu: Provide compile-time control for no-CBs CPUs
rcu: Tone down debugging during boot-up and shutdown.
rcu: Add softirq-stall indications to stall-warning messages
rcu: Documentation update
rcu: Make bugginess of code sample more evident
rcu: Fix hlist_bl_set_first_rcu() annotation
rcu: Delete unused rcu_node "wakemask" field
...
|
|
Merge second batch of fixes from Andrew Morton:
- various misc bits
- some printk updates
- a new "SRAM" driver.
- MAINTAINERS updates
- the backlight driver queue
- checkpatch updates
- a few init/ changes
- a huge number of drivers/rtc changes
- fatfs updates
- some lib/idr.c work
- some renaming of the random driver interfaces
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (285 commits)
net: rename random32 to prandom
net/core: remove duplicate statements by do-while loop
net/core: rename random32() to prandom_u32()
net/netfilter: rename random32() to prandom_u32()
net/sched: rename random32() to prandom_u32()
net/sunrpc: rename random32() to prandom_u32()
scsi: rename random32() to prandom_u32()
lguest: rename random32() to prandom_u32()
uwb: rename random32() to prandom_u32()
video/uvesafb: rename random32() to prandom_u32()
mmc: rename random32() to prandom_u32()
drbd: rename random32() to prandom_u32()
kernel/: rename random32() to prandom_u32()
mm/: rename random32() to prandom_u32()
lib/: rename random32() to prandom_u32()
x86: rename random32() to prandom_u32()
x86: pageattr-test: remove srandom32 call
uuid: use prandom_bytes()
raid6test: use prandom_bytes()
sctp: convert sctp_assoc_set_id() to use idr_alloc_cyclic()
...
|
|
Commit 7ff9554bb578 ("printk: convert byte-buffer to variable-length
record buffer") removed start and end parameters from
call_console_drivers, but those parameters still exist in
include/trace/events/printk.h.
Without start and end parameters handling, printk tracing became more
simple as: trace_console(text, len);
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge first batch of fixes from Andrew Morton:
- A couple of kthread changes
- A few minor audit patches
- A number of fbdev patches. Florian remains AWOL so I'm picking up
some of these.
- A few kbuild things
- ocfs2 updates
- Almost all of the MM queue
(And in the meantime, I already have the second big batch from Andrew
pending in my mailbox ;^)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (149 commits)
memcg: take reference before releasing rcu_read_lock
mem hotunplug: fix kfree() of bootmem memory
mmKconfig: add an option to disable bounce
mm, nobootmem: do memset() after memblock_reserve()
mm, nobootmem: clean-up of free_low_memory_core_early()
fs/buffer.c: remove unnecessary init operation after allocating buffer_head.
numa, cpu hotplug: change links of CPU and node when changing node number by onlining CPU
mm: fix memory_hotplug.c printk format warning
mm: swap: mark swap pages writeback before queueing for direct IO
swap: redirty page if page write fails on swap file
mm, memcg: give exiting processes access to memory reserves
thp: fix huge zero page logic for page with pfn == 0
memcg: avoid accessing memcg after releasing reference
fs: fix fsync() error reporting
memblock: fix missing comment of memblock_insert_region()
mm: Remove unused parameter of pages_correctly_reserved()
firmware, memmap: fix firmware_map_entry leak
mm/vmstat: add note on safety of drain_zonestat
mm: thp: add split tail pages to shrink page list in page reclaim
mm: allow for outstanding swap writeback accounting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"In user visible terms just a couple of enhancements here, though there
was a moderate amount of refactoring required in order to support the
register cache sync performance improvements.
- Support for block and asynchronous I/O during register cache
syncing; this provides a use case dependant performance
improvement.
- Additional debugfs information on the memory consuption and
register set"
* tag 'regmap-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits)
regmap: don't corrupt work buffer in _regmap_raw_write()
regmap: cache: Fix format specifier in dev_dbg
regmap: cache: Make regcache_sync_block_raw static
regmap: cache: Write consecutive registers in a single block write
regmap: cache: Split raw and non-raw syncs
regmap: cache: Factor out block sync
regmap: cache: Factor out reg_present support from rbtree cache
regmap: cache: Use raw I/O to sync rbtrees if we can
regmap: core: Provide regmap_can_raw_write() operation
regmap: cache: Provide a get address of value operation
regmap: Cut down on the average # of nodes in the rbtree cache
regmap: core: Make raw write available to regcache
regmap: core: Warn on invalid operation combinations
regmap: irq: Clarify error message when we fail to request primary IRQ
regmap: rbtree Expose total memory consumption in the rbtree debugfs entry
regmap: debugfs: Add a registers `range' file
regmap: debugfs: Simplify calculation of `c->max_reg'
regmap: cache: Store caches in native register format where possible
regmap: core: Split out in place value parsing
regmap: cache: Use regcache_get_value() to check if we updated
...
|
|
Use the events API to trace filemap loading and unloading of file pieces
into the page cache.
This patch aims at tracing the eviction reload cycle of executable and
shared libraries pages in a memory constrained environment.
The typical usage is to spot a specific device and inode (for example
/lib/libc.so) to see the eviction cycles, and find out if frequently
used code is rather spread across many pages (bad) or coallesced (good).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Along with the usual minor fixes and clean ups there are a few major
changes with this pull request.
1) Multiple buffers for the ftrace facility
This feature has been requested by many people over the last few
years. I even heard that Google was about to implement it themselves.
I finally had time and cleaned up the code such that you can now
create multiple instances of the ftrace buffer and have different
events go to different buffers. This way, a low frequency event will
not be lost in the noise of a high frequency event.
Note, currently only events can go to different buffers, the tracers
(ie function, function_graph and the latency tracers) still can only
be written to the main buffer.
2) The function tracer triggers have now been extended.
The function tracer had two triggers. One to enable tracing when a
function is hit, and one to disable tracing. Now you can record a
stack trace on a single (or many) function(s), take a snapshot of the
buffer (copy it to the snapshot buffer), and you can enable or disable
an event to be traced when a function is hit.
3) A perf clock has been added.
A "perf" clock can be chosen to be used when tracing. This will cause
ftrace to use the same clock as perf uses, and hopefully this will
make it easier to interleave the perf and ftrace data for analysis."
* tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits)
tracepoints: Prevent null probe from being added
tracing: Compare to 1 instead of zero for is_signed_type()
tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT
ftrace: Get rid of ftrace_profile_bits
tracing: Check return value of tracing_init_dentry()
tracing: Get rid of unneeded key calculation in ftrace_hash_move()
tracing: Reset ftrace_graph_filter_enabled if count is zero
tracing: Fix off-by-one on allocating stat->pages
kernel: tracing: Use strlcpy instead of strncpy
tracing: Update debugfs README file
tracing: Fix ftrace_dump()
tracing: Rename trace_event_mutex to trace_event_sem
tracing: Fix comment about prefix in arch_syscall_match_sym_name()
tracing: Convert trace_destroy_fields() to static
tracing: Move find_event_field() into trace_events.c
tracing: Use TRACE_MAX_PRINT instead of constant
tracing: Use pr_warn_once instead of open coded implementation
ring-buffer: Add ring buffer startup selftest
tracing: Bring Documentation/trace/ftrace.txt up to date
tracing: Add "perf" trace_clock
...
Conflicts:
kernel/trace/ftrace.c
kernel/trace/trace.c
|
|
This can help when debugging the free nid allocation flows.
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
The current irq_comm.c file contains pieces of code that are generic
across different irqchip implementations, as well as code that is
fully IOAPIC specific.
Split the generic bits out into irqchip.c.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The trace_tick_stop() tracepoint is only available in full
dynticks. But it's also used by dynticks-idle so let's build
it for the latter config as well.
This fixes:
kernel/time/tick-sched.c: In function tick_nohz_stop_sched_tick:
kernel/time/tick-sched.c:644: error: implicit declaration of function trace_tick_stop
make[2]: *** [kernel/time/tick-sched.o] Erreur 1
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
Add tracepoints to debug checkpoint request.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
[Jaegeuk: change expressions]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Add tracepoints to debug the various page write operation
like data pages, meta pages.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
[Jaegeuk: remove unnecessary tracepoints]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Add tracepoints to debug the block allocation & fallocate.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
[Jaegeuk: enhance information]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Add tracepoints for tracing the garbage collector
threads in f2fs with status of collection & type.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
[Jaegeuk: modify slightly to show information]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Add tracepoints for page i/o operations and block allocation
tracing during page read operation.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
[Jaegeuk: combine and modify the tracepoint structures]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
add tracepoints for tracing the truncate operations
like truncate node/data blocks, f2fs_truncate etc.
Tracepoints are added at entry and exit of operation
to trace the success & failure of operation.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
[Jaegeuk: combine and modify the tracepoint structures]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Add tracepoints in f2fs for tracing the syncing
operations like filesystem sync, file sync enter/exit.
It will helf to trace the code under debugging scenarios.
Also add tracepoints for tracing the various inode operations
like building inode, eviction of inode, link/unlike of
inodes.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
[Jaegeuk: combine and modify the tracepoint structures]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
It's not obvious to find out why the full dynticks subsystem
doesn't always stop the tick: whether this is due to kthreads,
posix timers, perf events, etc...
These new tracepoints are here to help the user diagnose
the failures and test this feature.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
Add support for host1x client modules, and host1x channels to submit
work to the clients.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
|
|
Add host1x, the driver for host1x and its client unit 2D. The Tegra
host1x module is the DMA engine for register access to Tegra's
graphics- and multimedia-related modules. The modules served by
host1x are referred to as clients. host1x includes some other
functionality, such as synchronization.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
|
|
While investigating interactivity problems it was clear that processes
sometimes stall for long periods of times if an attempt is made to
lock a buffer which is undergoing writeback. It would stall in
a trace looking something like
[<ffffffff811a39de>] __lock_buffer+0x2e/0x30
[<ffffffff8123a60f>] do_get_write_access+0x43f/0x4b0
[<ffffffff8123a7cb>] jbd2_journal_get_write_access+0x2b/0x50
[<ffffffff81220f79>] __ext4_journal_get_write_access+0x39/0x80
[<ffffffff811f3198>] ext4_reserve_inode_write+0x78/0xa0
[<ffffffff811f3209>] ext4_mark_inode_dirty+0x49/0x220
[<ffffffff811f57d1>] ext4_dirty_inode+0x41/0x60
[<ffffffff8119ac3e>] __mark_inode_dirty+0x4e/0x2d0
[<ffffffff8118b9b9>] update_time+0x79/0xc0
[<ffffffff8118ba98>] file_update_time+0x98/0x100
[<ffffffff81110ffc>] __generic_file_aio_write+0x17c/0x3b0
[<ffffffff811112aa>] generic_file_aio_write+0x7a/0xf0
[<ffffffff811ea853>] ext4_file_write+0x83/0xd0
[<ffffffff81172b23>] do_sync_write+0xa3/0xe0
[<ffffffff811731ae>] vfs_write+0xae/0x180
[<ffffffff8117361d>] sys_write+0x4d/0x90
[<ffffffff8159d62d>] system_call_fastpath+0x1a/0x1f
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This reverts commit 3a366e614d0837d9fc23f78cdb1a1186ebc3387f.
Wanlong Gao reports that it causes a kernel panic on his machine several
minutes after boot. Reverting it removes the panic.
Jens says:
"It's not quite clear why that is yet, so I think we should just revert
the commit for 3.9 final (which I'm assuming is pretty close).
The wifi is crap at the LSF hotel, so sending this email instead of
queueing up a revert and pull request."
Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Requested-by: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The macro _TRACE_PROFILE_INIT was removed a long time ago,
but an "#undef" guard was left behind. Remove it.
Link: http://lkml.kernel.org/r/514684EE.6000805@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The smpboot threads rely on the park/unpark mechanism which binds per
cpu threads on a particular core. Though the functionality is racy:
CPU0 CPU1 CPU2
unpark(T) wake_up_process(T)
clear(SHOULD_PARK) T runs
leave parkme() due to !SHOULD_PARK
bind_to(CPU2) BUG_ON(wrong CPU)
We cannot let the tasks move themself to the target CPU as one of
those tasks is actually the migration thread itself, which requires
that it starts running on the target cpu right away.
The solution to this problem is to prevent wakeups in park mode which
are not from unpark(). That way we can guarantee that the association
of the task to the target cpu is working correctly.
Add a new task state (TASK_PARKED) which prevents other wakeups and
use this state explicitly for the unpark wakeup.
Peter noticed: Also, since the task state is visible to userspace and
all the parked tasks are still in the PID space, its a good hint in ps
and friends that these tasks aren't really there for the moment.
The migration thread has another related issue.
CPU0 CPU1
Bring up CPU2
create_thread(T)
park(T)
wait_for_completion()
parkme()
complete()
sched_set_stop_task()
schedule(TASK_PARKED)
The sched_set_stop_task() call is issued while the task is on the
runqueue of CPU1 and that confuses the hell out of the stop_task class
on that cpu. So we need the same synchronizaion before
sched_set_stop_task().
Reported-by: Dave Jones <davej@redhat.com>
Reported-and-tested-by: Dave Hansen <dave@sr71.net>
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Acked-by: Peter Ziljstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: dhillf@gmail.com
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1304091635430.21884@ionos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
None of these result in any bug, but they makes sparse complain.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The only difference between how we handle data=ordered and
data=writeback is a single call to ext4_jbd2_file_inode(). Eliminate
code duplication by factoring out redundant the code paths.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
|
