summaryrefslogtreecommitdiffstats
path: root/include/target
AgeCommit message (Collapse)AuthorFilesLines
2014-06-11target: Report correct response length for some commandsRoland Dreier1-0/+1
When an initiator sends an allocation length bigger than what its command consumes, the target should only return the actual response data and set the residual length to the unused part of the allocation length. Add a helper function that command handlers (INQUIRY, READ CAPACITY, etc) can use to do this correctly, and use this code to get the correct residual for commands that don't use the full initiator allocation in the handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and REPORT LUNS. This addresses a handful of failures as reported by Christophe with the Windows Certification Kit: http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515 Signed-off-by: Roland Dreier <roland@purestorage.com> Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-11Target/iscsi: Fix sendtargets response pdu for iser transportSagi Grimberg1-1/+2
In case the transport is iser we should not include the iscsi target info in the sendtargets text response pdu. This causes sendtargets response to include the target info twice. Modify iscsit_build_sendtargets_response to filter transport types that don't match. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reported-by: Slava Shwartsman <valyushash@gmail.com> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/sbc: Add sbc_dif_read_strip software emulationNicholas Bellinger1-0/+1
Split up __sbc_dif_verify_read() so that VERIFY READ emulation can perform target-core specific READ_STRIP, seperate from the existing FILEIO/RAMDISK backend emulation code. Also add sbc_dif_read_strip() in order to determine number of sectors using cmd->prot_length, and skip the extra sbc_dif_copy_prot(). Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/sbc: Add sbc_dif_generate software emulationNicholas Bellinger1-0/+1
This patch adds WRITE_INSERT emulation within target-core using TYPE1 / TYPE3 PI modes in sbc_dif_generate() code. This is useful in order for existing legacy fabrics that do not support protection offloads to interact with backend devices that currently have T10 PI enabled. v2 changes: - Rename to sbc_dif_generate() (Sagi) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Pass in transport supported PI at session initializationNicholas Bellinger3-9/+16
In order to support local WRITE_INSERT + READ_STRIP operations for non PI enabled fabrics, the fabric driver needs to be able signal what protection offload operations are supported. This is done at session initialization time so the modes can be signaled by individual se_wwn + se_portal_group endpoints, as well as optionally across different transports on the same endpoint. For iser-target, set TARGET_PROT_ALL if the underlying ib_device has already signaled PI offload support, and allow this to be exposed via a new iscsit_transport->iscsit_get_sup_prot_ops() callback. For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode operation. For all other drivers, set TARGET_PROT_NORMAL to disable fabric level PI. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Add TFO->abort_task for aborted task resources releaseNicholas Bellinger2-0/+2
Now that TASK_ABORTED status is not generated for all cases by TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is necessary in order to give fabric drivers a chance to unmap hardware / software resources before the se_cmd descriptor is released via the normal TFO->release_cmd() codepath. This patch adds TFO->aborted_task() in core_tmr_abort_task() in place of the original transport_send_task_abort(), and also updates all fabric drivers to implement this caller. The fabric drivers that include changes to perform cleanup via ->aborted_task() are: - iscsi-target - iser-target - srpt - tcm_qla2xxx The fabric drivers that currently set ->aborted_task() to NOPs are: - loopback - tcm_fc - usb-gadget - sbp-target - vhost-scsi For the latter five, there appears to be no additional cleanup required before invoking TFO->release_cmd() to release the se_cmd descriptor. v2 changes: - Move ->aborted_task() call into transport_cmd_finish_abort (Alex) Cc: Alex Leung <amleung21@yahoo.com> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Vu Pham <vu@mellanox.com> Cc: Chris Boot <bootc@bootc.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Fix Task Aborted Status (TAS) handlingAlex Leung1-1/+1
This patch addresses three of long standing issues wrt to Task Aborted Status (TAS) handling. The first is the incorrect assumption in core_tmr_handle_tas_abort() that TASK_ABORTED status is sent for the task referenced by TMR ABORT_TASK, and sending TASK_ABORTED status for TMR LUN_RESET on the same nexus the LUN_RESET was received. The second is to ensure the lun reference count is dropped within transport_cmd_finish_abort() by calling transport_lun_remove_cmd() before invoking transport_cmd_check_stop_to_fabric(). The last is to fix the delayed TAS handling to allow outstanding WRITEs to complete before sending the TASK_ABORTED status. This includes changing transport_check_aborted_status() to avoid processing when SCF_SEND_DELAYED_TAS has not be set, and updating transport_send_task_abort() to drop the SCF_SENT_DELAYED_TAS check. Signed-off-by: Alex Leung <amleung21@yahoo.com> Cc: Alex Leung <amleung21@yahoo.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/core: Remove prot_handover use for nowSagi Grimberg1-6/+0
This is not going to be supported soon - so drop it. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/dif: Introduce protection-passthough-only modeSagi Grimberg1-0/+1
Some transports (iSCSI/iSER/SRP/FC) support hardware INSERT/STRIP capabilities while other transports like loopback/vhost-scsi need perform this is software. This patch allows fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC to signal the early LUN scan handling case where PROTECT CDB bits are set, but no fabric buffer has been provided. For transports which use generic new command these buffers have yet to be allocated. Also this way, target may support protection information against legacy initiators (writes are inserted and reads are stripped). (Only set prot_pto for loopback during early special case - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-13Target/sbc: Set protection operation and relevant checksSagi Grimberg1-0/+7
SBC-3 mandates the protection checks that must be performed in the rdprotect/wrprotect field. Use them. According to backstore device pi_attributes and cdb rdprotect/wrprotect field. (Fix incorrect se_cmd->prot_type -> TARGET_PROT_NORMAL comparision in transport_generic_new_cmd - nab) (Fix missing break in sbc_set_prot_op_checks - DanC + Sagi) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iscsi/iser-target: Fix isert_conn->state hung shutdown issuesNicholas Bellinger1-0/+1
This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Simplify command completion by removing CMD_T_FAILED flagRoland Dreier1-1/+0
The CMD_T_FAILED flag is set used in one place to record the result of a trivial test, and it is only tested once, few lines later. We might as well make the code simpler and easier to read by directly doing the test of "success" where we want to use it. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-31Merge branch 'for-next' of ↵Linus Torvalds4-8/+86
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...
2014-01-30target: Fix percpu_ref_put race in transport_lun_remove_cmdNicholas Bellinger1-1/+1
This patch fixes a percpu_ref_put race for se_lun->lun_ref in transport_lun_remove_cmd() where ->lun_ref could end up being put more than once per command via different target completion and fabric release contexts. It adds a cmpxchg() for se_cmd->lun_ref_active to ensure that percpu_ref_put() is only ever called once per se_cmd. This bug was manifesting itself as a LUN shutdown regression bug in >= v3.13 code, where percpu_ref_kill() would end up hanging indefinately due to the incorrect percpu_ref count. (Change se_cmd->lun_ref_active from bool -> int to force at least a 4-byte cmpxchg with MIPS ll/sc ins. - Fengguang) Reported-by: Tommy Apel <tommyapeldk@gmail.com> Cc: Tommy Apel <tommyapeldk@gmail.com> Cc: <stable@vger.kernel.org> #3.13+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-25target: Report bad sector in sense data for DIF errorsSagi Grimberg1-1/+4
SPC-4 states that data-integrity errors shall also report the failed sector in CHECK_CONDITION response sense data information field. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-25iscsi-target: Convert gfp_t parameter to task state bitmaskNicholas Bellinger1-1/+1
This patch propigates the use of task state bitmask now used by percpu_ida_alloc() up the iscsi-target callchain, replacing the use of GFP_ATOMIC for TASK_RUNNING, and GFP_KERNEL for TASK_INTERRUPTIBLE. Also, drop the unnecessary gfp_t parameter to isert_allocate_cmd(), and just pass TASK_INTERRUPTIBLE into iscsit_allocate_cmd(). Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target: Add protection SGLs to target_submit_cmd_map_sglsNicholas Bellinger1-1/+2
This patch adds support to target_submit_cmd_map_sgls() for accepting 'sgl_prot' + 'sgl_prot_count' parameters for DIF protection information. Note the passed parameters are stored at se_cmd->t_prot_sg and se_cmd->t_prot_nents respectively. Also, update tcm_loop and vhost-scsi fabrics usage of target_submit_cmd_map_sgls() to take into account the new parameters. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/sbc: Add DIF TYPE1+TYPE3 read/write verify emulationNicholas Bellinger1-0/+4
This patch adds support for DIF read/write verify emulation for TARGET_DIF_TYPE1_PROT + TARGET_DIF_TYPE3_PROT operation. This includes sbc_dif_verify_write() + sbc_dif_verify_read() calls accessable by backend drivers to perform DIF verify for SGL based data and protection information. Also included is sbc_dif_copy_prot() logic to copy protection information to/from backend provided protection SGLs. Based on scsi_debug.c DIF TYPE1+TYPE3 emulation. v2 changes: - Select CRC_T10DIF for TARGET_CORE in Kconfig (Fengguang) - Drop IP checksum logic from sbc_dif_v1_verify (MKP) - Fix offset on app_tag = 0xffff in sbc_dif_verify_read() Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target: Add DIF CHECK_CONDITION ASC/ASCQ exception casesNicholas Bellinger1-0/+3
This patch adds support for DIF related CHECK_CONDITION ASC/ASCQ exception cases into transport_send_check_condition_and_sense(). This includes: LOGICAL BLOCK GUARD CHECK FAILED LOGICAL BLOCK APPLICATION TAG CHECK FAILED LOGICAL BLOCK REFERENCE TAG CHECK FAILED that used by DIF TYPE1 and TYPE3 failure cases. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target: Add DIF related base definitionsNicholas Bellinger2-0/+47
This patch adds DIF related definitions to target_core_base.h that includes enums for target_prot_op + target_prot_type + target_prot_version + target_guard_type + target_pi_error. Also included is struct se_dif_v1_tuple, along with changes to struct se_cmd, struct se_dev_attrib, and struct se_device. Also, add new se_subsystem_api->[init,format,free]_prot() callers used by target core code to setup backend specific protection information after the device has been configured. Enums taken from Sagi Grimberg's original patch. v2 changes: - Drop guard_type related definitions - Update target_prot_op + target_prot_ho definitions (Sagi) - Drop SCF_PROT + pi_prot_version flag - Add se_subsystem_api->format_prot() (Sagi) - Add hw_pi_prot_type device attribute Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09target: Convert inquiry temporary buffer to heap memoryNicholas Bellinger1-1/+1
This patch converts the temporary buffer in spc_emulate_inquiry() to use dynamically allocated memory, instead of local stack memory. Also bump SE_INQUIRY_BUF up to 1024 bytes to be safe when handling multiple large SCSI name descriptors for EVPD=0x83. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09target_core_alua: Referrals infrastructureHannes Reinecke1-0/+18
Add infrastructure for referrals. v2 changes: - Fix unsigned long long division in core_alua_state_lba_dependent on 32-bit (Fengguang + Chen + Hannes) - Fix compile warning in core_alua_state_lba_dependent (nab) - Convert segment_* + sectors variables in core_alua_state_lba_dependent to u64 (Hannes) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19target/file: Update hw_max_sectors based on current block_sizeNicholas Bellinger1-0/+1
This patch allows FILEIO to update hw_max_sectors based on the current max_bytes_per_io. This is required because vfs_[writev,readv]() can accept a maximum of 2048 iovecs per call, so the enforced hw_max_sectors really needs to be calculated based on block_size. This addresses a >= v3.5 bug where block_size=512 was rejecting > 1M sized I/O requests, because FD_MAX_SECTORS was hardcoded to 2048 for the block_size=4096 case. (v2: Use max_bytes_per_io instead of ->update_hw_max_sectors) Reported-by: Henrik Goldman <hg@x-formation.com> Cc: <stable@vger.kernel.org> #3.5+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_spc: Include target device descriptor in VPD page 83Hannes Reinecke1-1/+1
We should be including a descriptor referring to the target device to allow identification of different TCM instances. (nab: Bump SE_INQUIRY_BUF to 1024 bytes to handle 2x 256 byte SCSI names) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_alua: Use workqueue for ALUA transitioningHannes Reinecke1-0/+4
Use a workqueue for processing ALUA state transitions; this allows us to process implicit delay properly. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_alua: store old and pending ALUA stateHannes Reinecke1-0/+2
During state transition we should be storing both the original and the pending state. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_alua: Allocate ALUA metadata on demandHannes Reinecke1-3/+0
We should only allocate ALUA metadata if we're actually going to write them. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-16target: Remove unused ua_dev_list member in struct se_uaAndy Grover1-1/+0
Initialized but not used. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-11target: Remove write-only stats fields and lock from struct se_node_aclRoland Dreier1-4/+0
Commit 04f3b31bff72 ("iscsi-target: Convert iscsi_session statistics to atomic_long_t") removed the updating of these fields in iscsi (the only fabric driver that ever touched these counters), and the core has no way to report or otherwise use the values. Remove the last remnants of these counters. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target_core_alua: Store supported ALUA statesHannes Reinecke1-0/+1
The supported ALUA states might be different for individual devices, so store it in a separate field. (nab: Remove unnecessary line continuation) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target core: rename (ex,im)plict -> (ex,im)plicitHannes Reinecke1-1/+1
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-13target: Convert se_device statistics to atomic_long_tNicholas Bellinger1-5/+4
This patch converts the handful of se_device statistics to type atomic_long_t, instead of using se_device->stats_lock when incrementing these values. More importantly, go ahead and drop the spinlock usage within transport_lookup_cmd_lun() fast-path code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-12target: Pass through I/O topology for block backstoresAndy Grover1-0/+5
In addition to block size (already implemented), passing through alignment offset, logical-to-phys block exponent, I/O granularity and optimal I/O length will allow initiators to properly handle layout on LUNs with 4K block sizes. Tested with various weird values via scsi_debug module. One thing to look at with this patch is the new block limits values -- instead of granularity 1 optimal 8192, Lio will now be returning whatever the block device says, which may affect performance. Signed-off-by: Andy Grover <agrover@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-08target: Add per device xcopy_lun for copy offload I/ONicholas Bellinger1-28/+29
This patch adds a se_device->xcopy_lun that is used for local copy offload I/O, instead of allocating + initializing a pseudo se_lun for each received EXTENDED_COPY operation. Also, move declaration of struct se_lun + struct se_port_stat_grps ahead of struct se_device. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-07target: Drop left-over se_lun->lun_cmd_list shutdown codeNicholas Bellinger1-10/+3
Now with percpu refcounting for se_lun in place, go ahead and drop the legacy per se_cmd accounting for se_lun shutdown. This includes __transport_clear_lun_from_sessions(), the associated transport_lun_wait_for_tasks() logic, along with a handful of now unused se_cmd structure members and ->transport_state bits. Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-07target: Add percpu refcounting for se_lun accessNicholas Bellinger1-0/+5
This patch adds percpu refcounting for se_lun access that allows the association of an se_lun + se_cmd in transport_lookup_cmd_lun() to occur without an extra list_head for tracking outstanding I/O during se_lun shutdown. This effectively changes se_lun shutdown logic to wait for outstanding I/O percpu references to complete in transport_lun_remove_cmd() using se_lun->lun_ref_comp, instead of explicitly draining the per se_lun command list and waiting for individual se_cmd descriptor processing to complete. Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-23target: Export symbol core_tpg_check_initiator_node_aclThomas Glanzmann1-0/+2
Export symbol core_tpg_check_initiator_node_acl and move prototype from the private drivers/target/target_core_internal.h to the public include/target/target_core_fabric.h Signed-off-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16tcm_loop: separate out tcm_loop_issue_tmrHannes Reinecke1-0/+1
No functional change. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16target: Remove TF_CIT_TMPL macroAndy Grover1-1/+0
Remove a lingering macro that just hid a dereference. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10target/iscsi: Bump versions to v4.1.0Nicholas Bellinger1-1/+1
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10target: Add Third Party Copy (3PC) bit in INQUIRY responseNicholas Bellinger1-0/+3
This patch adds the Third Party Copy (3PC) bit to signal support for EXTENDED_COPY within standard inquiry response data. Also add emulate_3pc device attribute in configfs (enabled by default) to allow the exposure of this bit to be disabled, if necessary. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10target: Add support for EXTENDED_COPY copy offload emulationNicholas Bellinger1-0/+1
This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10target: Add global device list for EXTENDED_COPYNicholas Bellinger1-0/+1
EXTENDED_COPY needs to be able to search a global list of devices based on NAA WWN device identifiers, so add a simple g_device_list protected by g_device_mutex. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10target: Make helpers non static for EXTENDED_COPY command setupNicholas Bellinger1-0/+4
Both target_alloc_sgl() and transport_generic_map_mem_to_cmd() are required by EXTENDED_COPY logic when setting up internally dispatched command descriptors, so go ahead and make both of these non static. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10target/tcm_qla2xxx: Add/use target_reverse_dma_direction() in ↵Nicholas Bellinger1-0/+26
target_core_fabric.h Reversing the dma_data_direction for pci_map_sg() friends is useful for other drivers, so move it from tcm_qla2xxx into inline code within target_core_fabric.h. Also drop internal usage of equivlient in tcm_qla2xxx fabric code. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10target: Add support for COMPARE_AND_WRITE emulationNicholas Bellinger1-0/+1
This patch adds support for COMPARE_AND_WRITE emulation on a per block basis. This logic is used as an atomic test and set primative currently used by VMWare ESX VAAI for performing array side locking of individual VMFS extent ownership. This includes the COMPARE_AND_WRITE CDB parsing within sbc_parse_cdb(), and does the majority of the work within the compare_and_write_callback() to perform the verify instance user data comparision, and subsequent write instance user data I/O submission upon a successfull comparision. The synchronization is enforced by se_device->caw_sem, that is obtained before the initial READ I/O submission in sbc_compare_and_write(). The mutex is then released upon MISCOMPARE in compare_and_write_callback(), or upon WRITE instance user-data completion in compare_and_write_post(). The implementation currently assumes a single logical block (NoLB=1). v4 changes: - Explicitly clear cmd->transport_complete_callback for two failure cases in sbc_compare_and_write() in order to avoid double unlock of ->caw_sem in compare_and_write_callback() (Dan Carpenter) v3 changes: - Convert se_device->caw_mutex to ->caw_sem v2 changes: - Set SCF_COMPARE_AND_WRITE and cmd->execute_cmd() to sbc_compare_and_write() during setup in sbc_parse_cdb() - Use sbc_compare_and_write() for initial READ submission with DMA_FROM_DEVICE - Reset cmd->execute_cmd() to sbc_execute_rw() for write instance user-data in compare_and_write_callback() - Drop SCF_BIDI command flag usage - Set TRANSPORT_PROCESSING + transport_state flags before write instance submission, and convert to __target_execute_cmd() - Prevent sbc_get_size() from being being called twice to generate incorrect size in sbc_parse_cdb() - Enforce se_device->caw_mutex synchronization between initial READ I/O submission, and final WRITE I/O completion. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09target: Add MAXIMUM COMPARE AND WRITE LENGTH in Block Limits VPDNicholas Bellinger1-0/+3
This patch adds the MAXIMUM COMPARE AND WRITE LENGTH bit, currently hardcoded to a single logical block (NoLB=1) within the Block Limits VPD in spc_emulate_evpd_b0(). Also add emulate_caw device attribute in configfs (enabled by default) to allow the exposure of this bit to be disabled, if necessary. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09target: Make __target_execute_cmd() available as externNicholas Bellinger1-0/+1
Required by COMPARE_AND_WRITE for write instance user-data submission, in order to bypass target_execute_cmd() checks. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09target: Add transport_reset_sgl_orig() for COMPARE_AND_WRITENicholas Bellinger1-0/+2
After COMPARE_AND_WRITE completes it's comparision, the WRITE payload SGLs head expect to be updated to point from the verify instance of user data, to the write instance of user data. So for this special case, add transport_reset_sgl_orig() usage within transport_free_pages() and add se_cmd->t_data_[sg,nents]_orig members to save the original assignments. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09target: Allow sbc_ops->execute_rw() to accept SGLs + data_directionNicholas Bellinger2-1/+7
COMPARE_AND_WRITE expects to be able to send down a DMA_FROM_DEVICE to obtain the necessary READ payload for comparision against the first half of the WRITE payload containing the verify user data. Currently virtual backends expect to internally reference SGLs, SGL nents, and data_direction, so change IBLOCK, FILEIO and RD sbc_ops->execute_rw() to accept this values as function parameters. Also add default sbc_execute_rw() handler for the typical case for cmd->execute_rw() submission using cmd->t_data_sg, cmd->t_data_nents, and cmd->data_direction). v2 Changes: - Add SCF_COMPARE_AND_WRITE command flag - Use sbc_execute_rw() for normal cmd->execute_rw() submission with expected se_cmd members. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 03:49:35 +0000