summaryrefslogtreecommitdiffstats
path: root/include/sound/soc.h
AgeCommit message (Collapse)AuthorFilesLines
2013-02-11Merge remote-tracking branch 'asoc/topic/of' into asoc-nextMark Brown1-0/+2
2013-02-11Merge remote-tracking branch 'asoc/topic/core' into asoc-nextMark Brown1-2/+2
2013-01-27ASoC: add snd_soc_of_parse_daifmt() for DeviceTreeKuninori Morimoto1-0/+2
This patch adds snd_soc_of_parse_daifmt() and supports below style on DT. [prefix]format = "i2c"; [prefix]clock-gating = "continuous"; [prefix]bitclock-inversion; [prefix]bitclock-master; [prefix]frame-master; Each driver can use specific [prefix] (ex simple-card,cpu,dai,format = xxx;) This sample will be SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CONT | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBM_CFM Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-14ASoC: Constify ops and compr_ops fields of snd_soc_dai_linkLars-Peter Clausen1-2/+2
The core does not modify these fields, so they can be made const. This allows drivers to declare their op tables as const. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-20ASoC: core: Fix SOC_DOUBLE_RANGE() macrosMark Brown1-4/+6
Although we've had macros defining double _RANGE controls for a while now they've not actually been backed up properly by the implementation, it's treated everything as mono. Fix that by implementing the handling in the stereo controls, ensuring that the mono controls don't mistakenly get treated as stereo. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-12-15ASoC: Prevent pop_wait overwriteMisael Lopez Cruz1-0/+1
pop_wait is used to determine if a deferred playback close needs to be cancelled when the a PCM is open or if after the power-down delay expires it needs to run. pop_wait is associated with the CODEC DAI, so the CODEC DAI must be unique. This holds true for most CODECs, except for the dummy CODEC and its DAI. In DAI links with non-unique dummy CODECs (e.g. front-ends), pop_wait can be overwritten by another DAI link using also a dummy CODEC. Failure to cancel a deferred close can cause mute due to the DAPM STOP event sent in the deferred work. One scenario where pop_wait is overwritten and causing mute is below (where hw:0,0 and hw:0,1 are two front-ends with default pmdown_time = 5 secs): aplay /dev/urandom -D hw:0,0 -c 2 -r 48000 -f S16_LE -d 1 sleep 1 aplay /dev/urandom -D hw:0,1 -c 2 -r 48000 -f S16_LE -d 3 & aplay /dev/urandom -D hw:0,0 -c 2 -r 48000 -f S16_LE Since CODECs may not be unique, pop_wait is moved to the PCM runtime structure. Creating separate dummy CODECs for each DAI link can also solve the problem, but at this point it's only pop_wait variable in the CODEC DAI that has negative effects by not being unique. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: Avoid recalculating the bitmask for SOC_ENUM controlsLars-Peter Clausen1-1/+3
For ENUM controls the bitmask is calculated based on the number of items. Currently this is done each time the control is accessed. And while the performance impact of this should be negligible we can easily do better. The roundup_pow_of_two macro performs the same calculation which is currently done manually, but it is also possible to use this macro with compile time constants and so it can be used to initialize static data. So we can use it to initialize the mask field of a ENUM control during its declaration. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-20ASoC: add definations for compressed operationsVinod Koul1-1/+15
Here we update the asoc structures to add compress stream definations First the struct snd_soc_dai_driver adds a new member to indicate if the dai is compressed or pcm. Next we add a new structre the struct snd_soc_compr_ops in the struct snd_soc_dai_link. This is to be used for machine driver to perform any opertaions required for setting up compressed audio streams next is the compressed data operations, they are added using struct snd_compr_ops in the struct snd_soc_platform_driver. Signed-off-by: Namarta Kohli <namartax.kohli@intel.com> Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23ASoC: core: Add DOUBLE_R variants of the _RANGE controlsMark Brown1-0/+21
The code handles this fine already, we just need new macros in the header for drivers to create the controls. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-03ASoC: core: Add single controls with specified range of valuesAdam Thomson1-0/+23
Control type added for cases where a specific range of values within a register are required for control. Added convenience macros: SOC_SINGLE_RANGE SOC_SINGLE_RANGE_TLV Added accessor implementations: snd_soc_info_volsw_range snd_soc_put_volsw_range snd_soc_get_volsw_range Signed-off-by: Michal Hajduk <Michal.Hajduk@diasemi.com> Signed-off-by: Adam Thomson <Adam.Thomson@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: make snd_soc_dai_link more symmetricalStephen Warren1-5/+28
Prior to this patch, the CPU side of a DAI link was specified using a single name. Often, this was the result of calling dev_name() on the device providing the DAI, but in the case of a CPU DAI driver that provided multiple DAIs, it needed to mix together both the device name and some device-relative name, in order to form a single globally unique name. However, the CODEC side of the DAI link was specified using separate fields for device (name or OF node) and device-relative DAI name. This patch allows the CPU side of a DAI link to be specified in the same way as the CODEC side, separating concepts of device and device-relative DAI name. I believe this will be important in multi-codec and/or dynamic PCM scenarios, where a single CPU driver provides multiple DAIs, while also booting using device tree, with accompanying desire not to hard-code the CPU side device's name into the original .cpu_dai_name field. Ideally, both the CPU DAI and CODEC DAI loops in soc_bind_dai_link() would now be identical. However, two things prevent that at present: 1) The need to save rtd->codec for the CODEC side, which means we have to search for the CODEC explicitly, and not just the CODEC side DAI. 2) Since we know the CODEC side DAI is part of a codec, and not just a standalone DAI, it's slightly more efficient to convert .codec_name/ .codec_of_node into a codec first, and then compare each DAI's .codec field, since this avoids strcmp() on each DAI's CODEC's name within the loop. However, the two loops are essentially semantically equivalent. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add bespoke trigger()Liam Girdwood1-0/+4
Some on SoC DSP HW is very tightly coupled with DMA and DAI drivers. It's necessary to allow some flexability wrt to PCM operations here so that we can define a bespoke DPCM trigger() PCM operation for such HW. A bespoke DPCM trigger() allows exact ordering and timing of component triggering by allowing a component driver to manage the final enable and disable configurations without adding extra complexity to other component drivers. e.g. The McPDM DAI and ABE are tightly coupled on OMAP4 so we have a bespoke trigger to manage the trigger to improve performance and reduce complexity when triggering new McPDM BEs. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add API for DAI link substream and runtime lookupLiam Girdwood1-0/+5
Some component drivers will need to be able to look up their DAI link substream and RTD data. Provide a mechanism for this. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add debugFS support for DPCMLiam Girdwood1-0/+4
Add debugFS files for DPCM link management information. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add Dynamic PCM core operations.Liam Girdwood1-0/+17
The Dynamic PCM core allows digital audio data to be dynamically routed between different ALSA PCMs and DAI links on SoC CPUs with on chip DSP devices. e.g. audio data could be played on pcm:0,0 and routed to any (or all) SoC DAI links. Dynamic PCM introduces the concept of Front End (FE) PCMs and Back End (BE) PCMs. The FE PCMs are normal ALSA PCM devices except that they can dynamically route digital audio data to any supported BE PCM. A BE PCM has no ALSA device, but represents a DAI link and it's substream and audio HW parameters. e.g. pcm:0,0 routing digital data to 2 external codecs. FE pcm:0,0 ----> BE (McBSP.0) ----> CODEC 0 +--> BE (McPDM.0) ----> CODEC 1 e.g. pcm:0,0 and pcm:0,1 routing digital data to 1 external codec. FE pcm:0,0 --- +--> BE (McBSP.0) ----> CODEC FE pcm:0,1 --- The digital audio routing is controlled by the usual ALSA method of mixer kcontrols. Dynamic PCM uses a DAPM graph to work out the routing based upon the mixer settings and configures the BE PCMs based on routing and the FE HW params. DPCM is designed so that most ASoC component drivers will need no modification at all. It's intended that existing CODEC, DAI and platform drivers can be used in DPCM based audio devices without any changes. However, there will be some cases where minor changes are required (e.g. for very tightly coupled HW) and there are helpers to support this too. Somethimes the HW params of a FE and BE do not match or are incompatible, so in these cases the machine driver can reconfigure any hw_params and make any DSP perform sample rate / format conversion. This patch adds the core DPCM code and contains :- o The FE and BE PCM operations. o FE and BE DAI link support. o FE and BE PCM creation. o BE support API. o BE and FE link management. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23ASoC: core: Add strobe controlKristoffer KARLSSON1-0/+8
Added support for a control that strobes a bit in a register to high then back to low (or the inverse). This is typically useful for hardware that requires strobing a singe bit to trigger some functionality and where exposing the bit in a normal single control would require the user to first manually set then again unset the bit again for the strobe to trigger. Added convenience macro. SOC_SINGLE_STROBE Added accessor implementations. snd_soc_get_strobe snd_soc_put_strobe Signed-off-by: Kristoffer KARLSSON <kristoffer.karlsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23ASoC: core: Add signed multi register controlKristoffer KARLSSON1-1/+21
Added control type that can span multiple consecutive codec registers forming a single signed value in a MSB/LSB manner. The control dynamically adjusts to the register word size configured in driver. Added convenience macro. SOC_SINGLE_XR_SX Added accessor implementations. snd_soc_info_xr_sx snd_soc_get_xr_sx snd_soc_put_xr_sx Signed-off-by: Kristoffer KARLSSON <kristoffer.karlsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16ASoC: core: Support transparent CODEC<->CODEC DAI linksMark Brown1-0/+2
Rather than having the user half start a stream but avoid any DMA to trigger data flow on links which don't pass through the CPU create a DAPM route between the two DAI widgets using a hw_params configuration provided by the machine driver with the new 'params' member of the dai_link struct. If no configuration is provided in the dai_link then use the old style even for CODEC<->CODEC links to avoid breaking systems. This greatly simplifies the userspace usage of such links, making them as simple as analogue connections with the stream configuration being completely transparent to them. This is achieved by defining a new dai_link widget type which is created when CODECs are linked and triggering the configuration of the link via the normal PCM operations from there. It is expected that the bias level callbacks will be used for clock configuration. Currently only the DAI format, rate and channel count can be configured and currently the only DAI operations which can be called are hw_params and digital_mute(). This corresponds well to the majority of CODEC drivers which only use other callbacks for constraint setting but there is obviously much room for extension here. We can't simply call hw_params() on startup as things like the system clocking configuration may change at runtime and in future it will be desirable to offer some configurability of the link parameters. At present we are also restricted to a single DAPM link for the entire DAI. Once we have better support for channel mapping it would also be desirable to extend this feature so that we can propagate per-channel power state over the link. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-03ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLVBrian Austin1-20/+28
Some codecs namely Cirrus Logic Codecs have a way of wrapping the dB scale around 0dB without 0dB being in the middle. Rework of SOC_DOUBLE_R_SX_TLV to be more consistent with other asoc tlv macros. Add single register macro : SOC_SINGLE_SX_TLV. Use snd_soc_info_volsw for .info Use snd_soc_get_volsw_sx, snd_soc_put_volsw_sx for single and double. kcontrols for CS42L51 and CS42L73 are adjusted to these new TLV Macros. The max value is determined by: (number of steps) +1 for 0dB +max from codec datasheet. Signed-off-by: Brian Austin <brian.austin@cirrus.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: core: Use driver core probe deferralMark Brown1-1/+0
In version 3.4 the driver core acquired probe deferral which is a core way of doing essentially the same thing as ASoC has been doing since forever to make sure that all the devices needed to make up the card are present without needing open coding in the subsystem. Make basic use of this probe deferral mechanism for the cards, removing the need to handle partially instantiated cards. We should be able to remove even more code than this, though some of the checks we're currently doing should stay since they're about things like suppressing unneeded DAPM runs rather than deferring probes. In order to avoid robustness issues with our teardown paths (which do need quite a bit of TLC) add a check for aux_devs prior to attempting to set things up, this means that we've got a reasonable idea that everything will be there before we start. As with the removal of partial instantiation support more work will be needed to make this work neatly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-01ASoC: jack: Push locking for jacks down to the jackMark Brown1-0/+1
Currently operations on jack reporting take the CODEC mutex both to protect the current jack status and also to protect the DAPM run which is triggered on status updates. Since the addition of a DAPM-specific lock we no longer need to worry about locking DAPM as it has its own finer grained lock so create a per jack lock to take care of the jack status. This is both cleaner where the jack isn't specifically associated with a CODEC and clearer as it's much more obvious what the lock is protecting. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: core: Rename card mutex subclass to better align with usageLiam Girdwood1-2/+2
Change SND_SOC_CARD_CLASS_PCM to SND_SOC_CARD_CLASS_RUNTIME to better describe all uses for this mutex subclass and align with DAPM too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Use DAPM mutex for DAPM ops instead of codec mutexLiam Girdwood1-0/+1
It has now become necessary to use a DAPM mutex instead of the codec mutex to lock the DAPM operations. This is due to the recent multi component support and forth coming Dynamic PCM updates. Currently we lock DAPM operations with the codec mutex of the calling RTD context. However, DAPM operations can span the whole card context and all components. This patch updates the DAPM operations that use the codec mutex to now use the DAPM mutex PCM subclass for all DAPM ops. We also add a mutex subclass for DAPM init and PCM operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: core: Add card mutex locking subclassesLiam Girdwood1-0/+5
This is the first part of a change that is intended to improve ASoC locking protection for DAPM and PCM operations. This part of the series adds a mutex class for the soc_card mutex. The SND_SOC_CARD_CLASS_INIT class is used for card initialisation only whilst the SND_SOC_CARD_CLASS_PCM class is used for the forth coming Dynamic PCM operations. The new mutex classes are required otherwise we will see a false positive mutex deadlock warning between the card initialisation and the PCM operations (something that would never deadlock in real life). Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-06ASoC: core: Add platform component mutexLiam Girdwood1-0/+1
Add mutex support for platform IO operations. e.g. can be used for platform DAPM widget IO ops. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ASoC: core: Add support for masking out parts of coefficient blocksMark Brown1-0/+9
Chip designers frequently include things like the enable and disable controls for algorithms in the register blocks which also hold the coefficients. Since it's desirable to split out the enable/disable control from userspace the plain SND_SOC_BYTES() isn't optimal for these devices. Add a SND_SOC_BYTES_MASK() which allows a bitmask from the first word of the block to be excluded from the control. This supports the needs of devices I've looked at and lets us have a reasonably simple API. Further controls can be added in future if that's needed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-21ASoC: core: Add SND_SOC_BYTES control for coefficient blocksMark Brown1-0/+18
Allow devices to export blocks of registers to the application layer, intended for use for reading and writing coefficient data which can't usefully be worked with by the kernel at runtime (for example, due to requiring complex and expensive calculations or being the results of callibration procedures). Currently drivers are using platform data to provide configurations for coefficient blocks which isn't at all convenient for runtime management or configuration development. Currently only devices using regmap are supported, an error will be generated for any attempt to work with a byte control on a non-regmap device. There's no fundamental block to other devices so support could be added if required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17ASoC: dapm: Constify lots of names that are never modifiedMark Brown1-1/+1
Neater and avoids warnings when used in other places where const strings are desired. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-15ASoC: core: add platform DAPM debugfs supportSebastien Guiriec1-0/+5
Allow platform widgets to be visible in debugfs like codec widgets. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-09ASoC: core: Allow CODECs to set ignore_pmdown_time in the driver structMark Brown1-0/+2
This is usually not a use case dependant flag anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-04ASoC: core: Add support for DAI and machine kcontrols.Liam Girdwood1-1/+5
Currently ASoC can only add kcontrols using codec and platform component device handles. It's also desirable to add kcontrols for DAIs (i.e. McBSP) and for SoC card machine drivers too. This allows the kcontrol to have a direct handle to the parent ASoC component DAI/SoC Card/Platform/Codec device and hence easily get it's private data. This change makes snd_soc_add_controls() static and wraps it in the folowing calls (card and dai are new) :- snd_soc_add_card_controls() snd_soc_add_codec_controls() snd_soc_add_dai_controls() snd_soc_add_platform_controls() This patch also does a lot of small mechanical changes in individual codec drivers to replace snd_soc_add_controls() with snd_soc_add_codec_controls(). It also updates the McBSP DAI driver to use snd_soc_add_dai_controls(). Finally, it updates the existing machine drivers that register controls to either :- 1) Use snd_soc_add_card_controls() where no direct codec control is required. 2) Use snd_soc_add_codec_controls() where there is direct codec control. In the case of 1) above we also update the machine drivers to get the correct component data pointers from the kcontrol (rather than getting the machine pointer via the codec pointer). Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: Use regmap update bits operation for drivers using regmapMark Brown1-0/+1
If a driver is using regmap directly ensure that we're coherent with non-ASoC register updates by using the regmap API directly to do our read/modify/write cycles. This will bypass the ASoC cache but drivers using regmap directly should not be using the ASoC cache. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Allow drivers to specify how many bits are significant on a DAIMark Brown1-0/+1
Most devices accept data in formats that don't correspond directly to their internal format. ALSA allows us to set a msbits constraint which tells userspace about this in case it finds it useful (for example, in order to avoid wasting effort dithering bits that will be ignored when raising the sample size of data) so provide a mechanism for drivers to specify the number of bits that are actually significant on a DAI and add the appropriate constraints along with all the others. This is done slightly awkwardly as the constraint is specified per sample size - we loop over every possible sample size, including ones that the device doesn't support and including ones that have fewer bits than are actually used, but this is harmless as the upper layers do the right thing in these cases. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-01-10ASoC: Dynamically allocate the rtd device for a non-empty release()Mark Brown1-3/+3
The device model needs a release() function so it can free devices when they become dereferenced. Do that for rtds. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-22ASoC: Declare soc_new_pcm() properlyMark Brown1-0/+1
Ensure that everything is seeing the same declaration by moving it to a header file rather than putting the declaration in soc-core.c Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-12-22ASoC: Allow DAI links to be specified using device tree nodesStephen Warren1-0/+4
DAI link endpoints and platform (DMA) devices are currently specified by name. When instantiating sound cards from device tree, it may be more convenient to refer to these devices by phandle in the device tree, and for code to describe DAI links using the "struct device_node *" ("of_node") those phandles map to. This change adds new fields to snd_soc_dai_link which can "name" devices using of_node, enhances soc_bind_dai_link() to allow binding based on of_node, and enhances snd_soc_register_card() to ensure that illegal combinations of name and of_node are not used. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20ASoC: Add utility to parse DAPM routes from device treeStephen Warren1-0/+2
Implement snd_soc_of_parse_audio_routing(), a utility function that can parses a simple DAPM route table from device tree.The machine driver specifies the DT property to use, since this is binding-specific. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20ASoC: Add utility to set a card's name from device treeStephen Warren1-0/+3
Implement snd_soc_of_parse_card_name(), a utility function that sets a card's name from device tree. The machine driver specifies the DT property to use, since this is binding-specific. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13ASoC: Remove rbtree register cacheMark Brown1-1/+0
All users now use regmap directly so delete the ASoC version of the code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02ASoC: Drop unused state parameter from CODEC suspend callbackLars-Peter Clausen1-2/+1
The existence of this parameter is purely historical. None of the CODEC drivers uses it and we always pass in the same value anyway, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Implement fully_routed card propertyStephen Warren1-0/+1
A card is fully routed if the DAPM route table describes all connections on the board. When a card is fully routed, some operations can be automated by the ASoC core. The first, and currently only, such operation is described below, and implemented by this patch. Codecs often have a large number of external pins, and not all of these pins will be connected on all board designs. Some machine drivers therefore call snd_soc_dapm_nc_pin() for all the unused pins, in order to tell the ASoC core never to activate them. However, when a card is fully routed, the information needed to derive the set of unused pins is present in card->dapm_routes. In this case, have the ASoC core automatically call snd_soc_dapm_nc_pin() for each unused codec pin. This has been tested with soc/tegra/tegra_wm8903.c and soc/tegra/trimslice.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-10ASoC: Remove LZO cache typeMark Brown1-1/+0
There are no current users and new drivers ought to be using the regmap API and its cache implementation directly so just delete the ASoC copy. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-10ASoC: Remove extra space in runtime struct definitionMark Brown1-1/+1
My usual technique for finding definitions is to search for "name {" which breaks with the extra space. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-27ASoC: Allow machines to ignore pmdown_time per-linkramesh.babu@linux.intel.com1-0/+3
With this flag, each dai_link in machine driver can choose to ignore pmdown_time during DAPM shut down sequence. If the ignore_pmdown_time is set, the DAPM for corresponding DAI will be executed immediately. Signed-off-by: Ramesh Babu K V <ramesh.babu@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-14ASoC: core: Add flag to ignore pmdown_time at pcm_closePeter Ujfalusi1-0/+1
With this flag codec drivers can indicate that it is desired to ignore the pmdown_time for DAPM shutdown sequence when playback stream is stopped. The DAPM sequence will be executed without delay in this case. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-06ASoC: fix codec breakage caused by the volsw/volsw_2r mergerPeter Ujfalusi1-0/+2
By accident few places still uses the _2r calls from the core. This is a quick fix, the drivers using the old callbacks going to be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: core: Remove snd_soc_put_volsw_2r definitionPeter Ujfalusi1-1/+0
We do not have users for snd_soc_put_volsw_2r anymore. It can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: core: Combine snd_soc_put_volsw/put_volsw_2r functionsPeter Ujfalusi1-4/+3
Handle the put_volsw/put_volsw_2r in one function. To avoid build breakage in twl6040 keep the snd_soc_put_volsw_2r as define, and map it snd_soc_put_volsw. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: core: Combine snd_soc_get_volsw/get_volsw_2r functionsPeter Ujfalusi1-4/+2
Handle the get_volsw/get_volsw_2r in one function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: core: Combine snd_soc_info_volsw/info_volsw_2r functionsPeter Ujfalusi1-5/+3
Handle the info_volsw/info_volsw_2r in one function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>