Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch adds Codec2Codec support to audio-graph-card2.
It can use Codec2Codec but very simple case only for now.
It doesn't have "SWITCH" control yet, thus it start automatically
when it was probed, and can't stop, so far.
Thus it needs to be updated around widgets/routing handling,
and you need to understand that it is under experimental.
Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT)
widgets in below case.
It is assuming 2channel, S32_LE format for now.
It needs to be updated, too.
It needs "codec2codec" node (= B), needs to have routing (= A),
need to indicate CPU side at links (= X).
ports@0 is for CPU side (= X), port@1 is Codec side (= Y).
It needs to have "rate" (= C)
+--+
| |<-- Codec0 <-- IN
| |--> Codec1 --> OUT
+--+
sound {
compatible = "audio-graph-card2";
(A) routing = "OUT" ,"DAI1 Playback",
"DAI0 Capture", "IN";
(X) links = <&c2c>;
(B) codec2codec {
ports {
(C) rate = <48000>;
(X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; };
(Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; };
};
};
Codec {
ports {
port@0 {
bitclock-master;
frame-master;
codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; };
port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; };
};
};
Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds DPCM support to audio-graph-card2.
It uses "dpcm" node (= D), needs to have routing (= A),
need to indicate both FE/BE at links (= B, C).
dpcm ports@0 is for FE (= B), port@1 is for BE (= C).
remote-endpoint can use both Single/Multi connection.
DSP
************
PCM0 <--> * fe0 be0 * <--> DAI0: Codec Headset
PCM1 <--> * fe1 be1 * <--> DAI1: Codec Speakers
PCM2 <--> * fe2 be2 * <--> DAI2: MODEM
PCM3 <--> * fe3 be3 * <--> DAI3: BT
* be4 * <--> DAI4: DMIC
* be5 * <--> DAI5: FM
************
sound {
compatible = "audio-graph-card2";
// indicate routing
(A) routing = "xxx Playback", "xxx Playback",
"xxx Playback", "xxx Playback",
"xxx Playback", "xxx Playback";
// indicate all Front-End, Back-End in DPCM case
(B) links = <&fe0, &fe1, ...
(C) &be0, &be1, ...
(D) dpcm {
// Front-End
ports@0 {
(B) fe0: port@0 { fe0_ep: endpoint { remote-endpoint = <&pcm0_ep>; }; };
(B) fe1: port@1 { fe1_ep: endpoint { remote-endpoint = <&pcm1_ep>; }; };
...
};
// Back-End
ports@1 {
(C) be0: port@0 { be0_ep: endpoint { remote-endpoint = <&dai0_ep>; }; };
(C) be1: port@1 { be1_ep: endpoint { remote-endpoint = <&dai1_ep>; }; };
...
};
};
};
CPU {
ports {
bitclock-master;
frame-master;
port@0 { pcm0_ep: endpoint { remote-endpoint = <&fe0_ep>; }; };
port@1 { pcm1_ep: endpoint { remote-endpoint = <&fe1_ep>; }; };
...
};
};
Codec {
ports {
port@0 { dai0_ep: endpoint { remote-endpoint = <&be0_ep>; }; };
port@1 { dai1_ep: endpoint { remote-endpoint = <&be1_ep>; }; };
...
};
};
Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgrelu4v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We already have audio-graph-card which is Of-graph base of general
sound card driver.
It is supporting DPCM connection, but was forcibly expanded.
Thus, it is very difficult to add new features on it, for example
Multi CPU/Codec support, Codec2Codec support, etc.
This patch adds more flexible new Audio Graph Card2 driver for it.
audio-graph-card and audio-graph-card2 are similar, but don't have
full compatibility.
Audio Graph Card2 supports very generic connection, but some users
want to have its own settings, for example PLL settings, etc.
For such case, it has customizing support.
In users own driver, it can use Audio Graph Card2 parsing by using
audio_graph2_parse_of(), and doing its own customizing.
Because Audio Graph Card2 is still under experimental stage,
it will indicate such warning when probing, and the DT syntax
might be changed.
Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/871r8u4s6q.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87a6mhwyqn.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87tuitusy4.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87a6jn56x0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735p6n8q1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph-card2 can reuse audio_graph_remove() / asoc_simple_remove().
This patch moves it to simple-card-utils.c.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2df3uby.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph-card2 can reuse audio_graph_card_probe().
This patch moves it to simple-card-utils.c.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgxv3uc4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Following functions are renamed for a better global visibility.
graph_card_probe() --> audio_graph_card_probe()
graph_parse_of() --> audio_graph_parse_of()
graph_remove() --> audio_graph_remove() [exported as well]
The references of these are updated in audio graph and Tegra audio
graph card drivers.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1612719418-5858-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This commit exposes following functions which can be used by a sound
card driver based on generic audio graph driver. Idea is vendors can
have a thin driver and re-use common stuff from audio graph driver.
- graph_card_probe()
- graph_parse_of()
In doing so a new header file is added for above. The graph_probe()
function is simplified by moving more common stuff to graph_parse_of().
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-8-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|