summaryrefslogtreecommitdiffstats
path: root/include/soc/fsl
AgeCommit message (Collapse)AuthorFilesLines
2019-01-11soc: fsl: dpio: Change bpid type to u16Ioana Ciocoi Radulescu1-2/+2
In all QBMan registers, the buffer pool id field is two bytes long. The low level qbman APIs reflect this, but the high level DPIO ones use u32. Modify them in order to avoid implicit downcasts. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-01-11soc: fsl: dpio: add a device_link at dpaa2_io_service_registerIoana Ciornei1-2/+4
Automatically add a device link between the actual device requesting the dpaa2_io_service_register and the underlying dpaa2_io used. This link will ensure that when a DPIO device, which is indirectly used by other devices, is unbound any consumer devices will be also unbound from their drivers. For example, any DPNI, bound to the dpaa2-eth driver, which is using DPIO devices will be unbound before its supplier device. Also, add a new parameter to the dpaa2_io_service_[de]register functions to specify the requesting device (ie the consumer). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-01-11soc: fsl: dpio: store a backpointer to the device backing the dpaa2_ioIoana Ciornei1-1/+2
Add a new field in the dpaa2_io structure to hold a backpointer to the actual DPIO device. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-01-08soc: fsl: dpio: use a cpumask to identify which cpus are unusedIoana Ciornei1-0/+2
The current implementation of the dpio driver uses a static next_cpu variable to keep track of the index of the next cpu available. This approach does not handle well unbinding and binding dpio devices in a random order. For example, unbinding a dpio and then binding it again with the driver, will generate the below error: $ echo dpio.5 > /sys/bus/fsl-mc/drivers/fsl_mc_dpio/unbind $ echo dpio.5 > /sys/bus/fsl-mc/drivers/fsl_mc_dpio/bind [ 103.946380] fsl_mc_dpio dpio.5: probe failed. Number of DPIOs exceeds NR_CPUS. [ 103.955157] fsl_mc_dpio dpio.5: fsl_mc_driver_probe failed: -34 -bash: echo: write error: No such device Fix this error by keeping a global cpumask of unused cpus that will be updated at every dpaa2_dpio_[probe,remove]. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-12-19soc: fsl: dpio: Add BP and FQ query APIsRoy Pledge1-0/+4
Add FQ (Frame Queue) and BP (Buffer Pool) query APIs that users of QBMan can invoke to see the status of the queues and pools that they are using. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23soc/qman: add return value to interrupt coalesce changing APIsMadalin Bucur1-2/+6
Check that the values received by the portal interrupt coalesce change APIs are in range. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-29Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-0/+28
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The most noteworthy SoC driver changes this time include: - The TEE subsystem gains an in-kernel interface to access the TEE from device drivers. - The reset controller subsystem gains a driver for the Qualcomm Snapdragon 845 Power Domain Controller. - The Xilinx Zynq platform now has a firmware interface for its platform management unit. This contains a firmware "ioctl" interface that was a little controversial at first, but the version we merged solved that by not exposing arbitrary firmware calls to user space. - The Amlogic Meson platform gains a "canvas" driver that is used for video processing and shared between different high-level drivers. The rest is more of the usual, mostly related to SoC specific power management support and core drivers in drivers/soc: - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new features related to power and reset control. - The Mediatek mt8183 and mt6765 SoC platforms gain support for their respective power management chips. - A new driver for NXP i.MX8, which need a firmware interface for power management. - The SCPI firmware interface now contains support estimating power usage of performance states - The NVIDIA Tegra "pmc" driver gains a few new features, in particular a pinctrl interface for configuring the pads. - Lots of small changes for Qualcomm, in particular the "smem" device driver. - Some cleanups for the TI OMAP series related to their sysc controller. Additional cleanups and bugfixes in SoC specific drivers include the Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits) firmware: tegra: bpmp: Implement suspend/resume support drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs MAINTAINERS: imx: include drivers/firmware/imx path firmware: imx: add misc svc support firmware: imx: add SCU firmware driver support reset: Fix potential use-after-free in __of_reset_control_get() dt-bindings: arm: fsl: add scu binding doc soc: fsl: qbman: add interrupt coalesce changing APIs soc: fsl: bman_portals: defer probe after bman's probe soc: fsl: qbman: Use last response to determine valid bit soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers soc: fsl: qbman: Check if CPU is offline when initializing portals reset: qcom: PDC Global (Power Domain Controller) reset controller dt-bindings: reset: Add PDC Global binding for SDM845 SoCs reset: Grammar s/more then once/more than once/ bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS ...
2018-10-25Merge branch 'linus' of ↵Linus Torvalds3-0/+261
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove VLA usage - Add cryptostat user-space interface - Add notifier for new crypto algorithms Algorithms: - Add OFB mode - Remove speck Drivers: - Remove x86/sha*-mb as they are buggy - Remove pcbc(aes) from x86/aesni - Improve performance of arm/ghash-ce by up to 85% - Implement CTS-CBC in arm64/aes-blk, faster by up to 50% - Remove PMULL based arm64/crc32 driver - Use PMULL in arm64/crct10dif - Add aes-ctr support in s5p-sss - Add caam/qi2 driver Others: - Pick better transform if one becomes available in crc-t10dif" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: chelsio - Update ntx queue received from cxgb4 crypto: ccree - avoid implicit enum conversion crypto: caam - add SPDX license identifier to all files crypto: caam/qi - simplify CGR allocation, freeing crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static crypto: arm64/aes-blk - ensure XTS mask is always loaded crypto: testmgr - fix sizeof() on COMP_BUF_SIZE crypto: chtls - remove set but not used variable 'csk' crypto: axis - fix platform_no_drv_owner.cocci warnings crypto: x86/aes-ni - fix build error following fpu template removal crypto: arm64/aes - fix handling sub-block CTS-CBC inputs crypto: caam/qi2 - avoid double export crypto: mxs-dcp - Fix AES issues crypto: mxs-dcp - Fix SHA null hashes and output length crypto: mxs-dcp - Implement sha import/export crypto: aegis/generic - fix for big endian systems crypto: morus/generic - fix for big endian systems crypto: lrw - fix rebase error after out of bounds fix crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X. crypto: cavium/nitrox - NITROX command queue changes. ...
2018-10-22net/wan/fsl_ucc_hdlc: error countersMathias Thore1-1/+7
Extract error information from rx and tx buffer descriptors, and update error counters. Signed-off-by: Mathias Thore <mathias.thore@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05soc: fsl: qbman: add interrupt coalesce changing APIsMadalin Bucur1-0/+28
Add the APIs required to control the QMan portal interrupt coalescing settings. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-09-27soc: fsl: qbman: add APIs to retrieve the probing statusLaurentiu Tudor2-0/+16
Add a couple of new APIs to check the probing status of qman and bman: 'int bman_is_probed()' and 'int qman_is_probed()'. They return the following values. * 1 if qman/bman were probed correctly * 0 if qman/bman were not yet probed * -1 if probing of qman/bman failed Drivers that use qman/bman driver services are required to use these APIs before calling any functions exported by qman or bman drivers or otherwise they will crash the kernel. The APIs will be used in the following couple of qbman portal patches and later in the series in the dpaa1 ethernet driver. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-09-21soc: fsl: dpio: add congestion notification supportHoria Geantă1-0/+15
Add support for Congestion State Change Notifications (CSCN), which allow DPIO users to be notified when a congestion group changes its state (due to hitting the entrance / exit threshold). Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-21soc: fsl: dpio: add frame list format supportHoria Geantă1-0/+242
Add support for dpaa2_fd_list format, i.e. dpaa2_fl_entry structure and accessors. Frame list entries (FLEs) are similar, but not identical to FDs: + "F" (final) bit - FMT[b'01] is reserved - DD, SC, DROPP bits (covered by "FD compatibility" field in FLE case) - FLC[5:0] not used for stashing Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-21soc: fsl: dpio: add back some frame queue functionsHoria Geantă1-0/+4
This commit adds back functions removed in commit a211c8170b3c ("staging: fsl-mc/dpio: remove couple of unused functions") since dpseci object will make use of them. Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-24staging: fsl-mc: Move DPIO from staging to drivers/soc/fslRoy Pledge3-0/+730
Move the NXP DPIO (Datapath I/O Driver) out of the drivers/staging directory and into the drivers/soc/fsl directory. The DPIO driver enables access to Queue and Buffer Manager (QBMAN) hardware on NXP DPAA2 devices. This is a prerequisite to moving the DPAA2 Ethernet driver out of staging. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-05-18net/wan/fsl_ucc_hdlc: add hdlc-bus supportHolger Brunck1-0/+5
This adds support for hdlc-bus mode to the fsl_ucc_hdlc driver. This can be enabled with the "fsl,hdlc-bus" property in the DTS node of the corresponding ucc. This aligns the configuration of the UPSMR and GUMR registers to what is done in our ucc_hdlc driver (that only support hdlc-bus mode) and with the QuickEngine's documentation for hdlc-bus mode. GUMR/SYNL is set to AUTO for the busmode as in this case the CD signal is ignored. The brkpt_support is enabled to set the HBM1 bit in the CMXUCR register to configure an open-drain connected HDLC bus. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18fsl/qe: add bit description for SYNL register for GUMRHolger Brunck1-0/+4
Add the bitmask for the two bit SYNL register according to the QUICK Engine Reference Manual. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-12Merge tag 'powerpc-4.12-2' of ↵Linus Torvalds2-19/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "The change to the Linux page table geometry was delayed for more testing with 16G pages, and there's the new CPU features stuff which just needed one more polish before going in. Plus a few changes from Scott which came in a bit late. And then various fixes, mostly minor. Summary highlights: - rework the Linux page table geometry to lower memory usage on 64-bit Book3S (IBM chips) using the Hash MMU. - support for a new device tree binding for discovering CPU features on future firmwares. - Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression on 64e, a fix for a kernel hang on 64e when using a debugger inside a relocated kernel, a qman fix, and misc qe improvements." Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong, Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp" * tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Support new device tree binding for discovering CPU features powerpc: Don't print cpu_spec->cpu_name if it's NULL of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle powerpc/64s: Fix unnecessary machine check handler relocation branch powerpc/mm/book3s/64: Rework page table geometry for lower memory usage powerpc: Fix distclean with Makefile.postlink powerpc/64e: Don't place the stack beyond TASK_SIZE powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery powerpc/8xx: Adding support of IRQ in MPC8xx GPIO soc/fsl/qbman: Disable IRQs for deferred QBMan work soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions soc/fsl/qe: only apply QE_General4 workaround on affected SoCs soc/fsl/qe: round brg_freq to 1kHz granularity soc/fsl/qe: get rid of immrbar_virt_to_phys() net: ethernet: ucc_geth: fix MEM_PART_MURAM mode powerpc/64e: Fix hang when debugging programs with relocated kernel
2017-04-30soc/fsl/qe: get rid of immrbar_virt_to_phys()Christophe Leroy1-19/+0
immrbar_virt_to_phys() is not used anymore Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Li Yang <pku.leo@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-30net: ethernet: ucc_geth: fix MEM_PART_MURAM modeChristophe Leroy1-0/+1
Since commit 5093bb965a163 ("powerpc/QE: switch to the cpm_muram implementation"), muram area is not part of immrbar mapping anymore so immrbar_virt_to_phys() is not usable anymore. Fixes: 5093bb965a163 ("powerpc/QE: switch to the cpm_muram implementation") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Li Yang <pku.leo@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-03-24soc/qman: add macros needed by caam/qi driverHoria Geantă1-0/+2
A few other things need to be added in soc/qman, such that caam/qi won't open-code them. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc/qman: export non-programmable FQD fields queryHoria Geantă1-0/+68
Export qman_query_fq_np() function and related structures. This will be needed in the caam/qi driver, where "queue empty" condition will be decided based on the frm_cnt. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc/qman: add dedicated channel ID for CAAMHoria Geantă1-0/+3
Add and export the ID of the channel serviced by the CAAM (Cryptographic Acceleration and Assurance Module) DCP. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc/qman: export volatile dequeue related structsHoria Geantă1-0/+36
Since qman_volatile_dequeue() is already exported, move the related structures into the public header too. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-23soc/qman: Handle endianness of h/w descriptorsClaudiu Manoil1-23/+25
The hardware descriptors have big endian (BE) format. Provide proper endianness handling for the remaining descriptor fields, to ensure they are correctly accessed by non-BE CPUs too. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Clean up CGR CSCN target update operationsClaudiu Manoil1-2/+2
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Change remaining contextB into context_bClaudiu Manoil1-6/+6
There are multiple occurences of both contextB and context_b in different h/w descriptors, referring to the same descriptor field known as "Context B". Stick with the "context_b" naming, for obvious reasons including consistency (see also context_a). Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Drop unused field from eqcr/dqrr descriptorsClaudiu Manoil1-2/+1
ORP ("Order Restoration Point") mechanism not supported. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Fix accesses to fqid, cleanupClaudiu Manoil1-0/+5
Preventively mask every access to the 'fqid' h/w field, since it is defined as a 24-bit field, for every h/w descriptor. Add generic accessors for this field to ensure correct access. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Fix struct qm_fqd set accessor for context_aClaudiu Manoil1-1/+1
context_a.hi is 32bit Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-09-25soc/fsl: Introduce DPAA 1.x QMan device driverClaudiu Manoil1-0/+1074
This driver enables the Freescale DPAA 1.x Queue Manager block. QMan is a hardware accelerator that manages frame queues. It allows CPUs and other accelerators connected to the SoC datapath to enqueue and dequeue ethernet frames, thus providing the infrastructure for data exchange among CPUs and datapath accelerators. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-09-25soc/fsl: Introduce DPAA 1.x BMan device driverClaudiu Manoil1-0/+129
This driver enables the Freescale DPAA 1.x Buffer Manager block. BMan is a hardware accelerator that manages buffer pools. It allows CPUs and other accelerators connected to the SoC datapath to acquire and release buffers during data processing. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-08fsl/qe: Do not prefix header guard with CONFIG_Andreas Ziegler1-2/+2
The CONFIG_ prefix should only be used for options which can be configured through Kconfig and not for guarding headers. Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07drivers/net: support hdlc function for QE-UCCZhao Qiang2-2/+21
The driver add hdlc support for Freescale QUICC Engine. It support NMSI and TSA mode. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07fsl/qe: Add QE TDM libZhao Qiang2-4/+95
QE has module to support TDM, some other protocols supported by QE are based on TDM. add a qe-tdm lib, this lib provides functions to the protocols using TDM to configurate QE-TDM. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07fsl/qe: Make regs resouce_size_tZhao Qiang1-1/+1
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07fsl/qe: setup clock source for TDM modeZhao Qiang3-0/+21
Add tdm clock configuration in both qe clock system and ucc fast controller. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07fsl/qe: add rx_sync and tx_sync for TDM modeZhao Qiang2-0/+4
Rx_sync and tx_sync are used by QE-TDM mode, add them to struct ucc_fast_info. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09qe: Make cpm_muram_alloc_common staticSaurabh Sengar1-2/+0
as cpm_muram_alloc_common is used only in this file, making it static Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
2015-12-22QE: Move QE from arch/powerpc to drivers/socZhao Qiang6-0/+2005
ls1 has qe and ls1 has arm cpu. move qe from arch/powerpc to drivers/soc/fsl to adapt to powerpc and arm Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 09:13:04 +0000