summaryrefslogtreecommitdiffstats
path: root/include/rdma
AgeCommit message (Collapse)AuthorFilesLines
2019-08-20RDMA/restrack: Rewrite PID namespace check to be reliableLeon Romanovsky1-2/+1
task_active_pid_ns() is wrong API to check PID namespace because it posses some restrictions and return PID namespace where the process was allocated. It created mismatches with current namespace, which can be different. Rewrite whole rdma_is_visible_in_pid_ns() logic to provide reliable results without any relation to allocated PID namespace. Fixes: 8be565e65fa9 ("RDMA/nldev: Factor out the PID namespace check") Fixes: 6a6c306a09b5 ("RDMA/restrack: Make is_visible_in_pid_ns() as an API") Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190815083834.9245-4-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01RDMA/devices: Remove the lock around remove_client_contextJason Gunthorpe1-1/+0
Due to the complexity of client->remove() callbacks it is desirable to not hold any locks while calling them. Remove the last one by tracking only the highest client ID and running backwards from there over the xarray. Since the only purpose of that lock was to protect the linked list, we can drop the lock. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081841.32345-3-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01RDMA/devices: Do not deadlock during client removalJason Gunthorpe1-0/+3
lockdep reports: WARNING: possible circular locking dependency detected modprobe/302 is trying to acquire lock: 0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990 but task is already holding lock: 000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&device->client_data_rwsem){++++}: down_read+0x3f/0x160 ib_get_net_dev_by_params+0xd5/0x200 [ib_core] cma_ib_req_handler+0x5f6/0x2090 [rdma_cm] cm_process_work+0x29/0x110 [ib_cm] cm_req_handler+0x10f5/0x1c00 [ib_cm] cm_work_handler+0x54c/0x311d [ib_cm] process_one_work+0x4aa/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #1 ((work_completion)(&(&work->work)->work)){+.+.}: process_one_work+0x45f/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #0 ((wq_completion)ib_cm){+.+.}: lock_acquire+0xc8/0x1d0 flush_workqueue+0x102/0x990 cm_remove_one+0x30e/0x3c0 [ib_cm] remove_client_context+0x94/0xd0 [ib_core] disable_device+0x10a/0x1f0 [ib_core] __ib_unregister_device+0x5a/0xe0 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib] __mlx5_ib_remove+0x3d/0x70 [mlx5_ib] mlx5_ib_remove+0x12e/0x140 [mlx5_ib] mlx5_remove_device+0x144/0x150 [mlx5_core] mlx5_unregister_interface+0x3f/0xf0 [mlx5_core] mlx5_ib_cleanup+0x10/0x3a [mlx5_ib] __x64_sys_delete_module+0x227/0x350 do_syscall_64+0xc3/0x6a4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Which is due to the read side of the client_data_rwsem being obtained recursively through a work queue flush during cm client removal. The lock is being held across the remove in remove_client_context() so that the function is a fence, once it returns the client is removed. This is required so that the two callers do not proceed with destruction until the client completes removal. Instead of using client_data_rwsem use the existing device unregistration refcount and add a similar client unregistration (client->uses) refcount. This will fence the two unregistration paths without holding any locks. Cc: <stable@vger.kernel.org> Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-22IB/hfi1: Unreserve a flushed OPFN requestKaike Wan1-5/+4
When an OPFN request is flushed, the request is completed without unreserving itself from the send queue. Subsequently, when a new request is post sent, the following warning will be triggered: WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt] Call Trace: [<ffffffffbbb61e41>] dump_stack+0x19/0x1b [<ffffffffbb497688>] __warn+0xd8/0x100 [<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20 [<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt] [<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0 [<ffffffffbb61d645>] ? __kmalloc+0x55/0x230 [<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs] [<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs] [<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs] [<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0 [<ffffffffbb641650>] vfs_write+0xc0/0x1f0 [<ffffffffbb64246f>] SyS_write+0x7f/0xf0 [<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27 This patch fixes the problem by moving rvt_qp_wqe_unreserve() into rvt_qp_complete_swqe() to simplify the code and make it less error-prone. Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed") Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-09RDMA/core: Make rdma_counter.h compile stand aloneJason Gunthorpe2-3/+4
5.4-rc1 will have new compile time debugging to test that headers can be compiled stand alone. Many rdma headers are already broken and excluded from the mechanism, however to avoid compile failures during the merge window fix enough so that the newly added header compiles clean. Fixes: 413d3347503b ("RDMA/counter: Add set/clear per-port auto mode support") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Mark Zhang <markz@mellanox.com>
2019-07-08RDMA/core: Provide RDMA DIM support for ULPsYamin Friedman1-0/+4
Added the interface in the infiniband driver that applies the rdma_dim adaptive moderation. There is now a special function for allocating an ib_cq that uses rdma_dim. Performance improvement (ConnectX-5 100GbE, x86) running FIO benchmark over NVMf between two equal end-hosts with 56 cores across a Mellanox switch using null_blk device: READS without DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 3.8GiB/s | 7.7M | 1401 usec | 2442 usec 4k | 7.0GiB/s | 1.8M | 4817 usec | 6587 usec 64k | 10.7GiB/s| 175k | 9896 usec | 10028 usec IO WRITES without DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 3.6GiB/s | 7.5M | 1434 usec | 2474 usec 4k | 6.3GiB/s | 1.6M | 938 usec | 1221 usec 64k | 10.7GiB/s| 175k | 8979 usec | 12780 usec IO READS with DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 4GiB/s | 8.2M | 816 usec | 889 usec 4k | 10.1GiB/s| 2.65M| 3359 usec | 5080 usec 64k | 10.7GiB/s| 175k | 9896 usec | 10028 usec IO WRITES with DIM: blk size | BW | IOPS | 99th percentile latency | 99.99th latency 512B | 3.9GiB/s | 8.1M | 799 usec | 922 usec 4k | 9.6GiB/s | 2.5M | 717 usec | 1004 usec 64k | 10.7GiB/s| 176k | 8586 usec | 12256 usec The rdma_dim algorithm was designed to measure the effectiveness of moderation on the flow in a general way and thus should be appropriate for all RDMA storage protocols. rdma_dim is configured to be the default option based on performance improvement seen after extensive tests. Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08IB/mlx5: Report correctly tag matching rendezvous capabilityDanit Goldberg1-2/+2
Userspace expects the IB_TM_CAP_RC bit to indicate that the device supports RC transport tag matching with rendezvous offload. However the firmware splits this into two capabilities for eager and rendezvous tag matching. Only if the FW supports both modes should userspace be told the tag matching capability is available. Cc: <stable@vger.kernel.org> # 4.13 Fixes: eb761894351d ("IB/mlx5: Fill XRQ capabilities") Signed-off-by: Danit Goldberg <danitg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/nldev: Allow get default counter statistics through RDMA netlinkMark Zhang1-0/+1
This patch adds the ability to return the hwstats of per-port default counters (which can also be queried through sysfs nodes). Signed-off-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/nldev: Allow counter manual mode configration through RDMA netlinkMark Zhang1-0/+3
Provide an option to allow users to manually bind a qp with a counter through RDMA netlink. Limit it to users with ADMIN capability only. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/counter: Allow manual mode configuration supportMark Zhang1-0/+7
In manual mode a QP is bound to a counter manually. If counter is not specified then a new one will be allocated. Manual mode is enabled when user binds a QP, and disabled when the last manually bound QP is unbound. When auto-mode is turned off and there are counters left, manual mode is enabled so that the user is able to access these counters. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/core: Get sum value of all counters when perform a sysfs stat readMark Zhang1-0/+2
Since a QP can only be bound to one counter, then if it is bound to a separate counter, for backward compatibility purpose, the statistic value must be: * stat of default counter + stat of all running allocated counters + stat of all deallocated counters (history stats) Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/netlink: Implement counter dumpit calbackMark Zhang2-0/+13
This patch adds the ability to return all available counters together with their properties and hwstats. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/counter: Add "auto" configuration mode supportMark Zhang2-0/+26
In auto mode all QPs belong to one category are bind automatically to a single counter set. Currently only "qp type" is supported. In this mode the qp counter is set in RST2INIT modification, and when a qp is destroyed the counter is unbound. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/counter: Add set/clear per-port auto mode supportMark Zhang2-0/+26
Add an API to support set/clear per-port auto mode. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/restrack: Introduce statistic counterMark Zhang2-0/+22
Introduce statistic counter as a new resource. It allows a user to monitor specific objects (e.g., QPs) by binding to a counter. In some cases a user counter resource is created with task other then "current", because its creation is done as part of rdmatool call. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{rdmavt, hfi1, qib}: Add helpers to hide SWQE WR detailsMichael J. Ruhl1-0/+50
Add some helper functions to hide struct rvt_swqe details. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPsMichael J. Ruhl2-5/+20
Historically rdmavt destroy_ah() has returned an -EBUSY when the AH has a non-zero reference count. IBTA 11.2.2 notes no such return value or error case: Output Modifiers: - Verb results: - Operation completed successfully. - Invalid HCA handle. - Invalid address handle. ULPs never test for this error and this will leak memory. The reference count exists to allow for driver independent progress mechanisms to process UD SWQEs in parallel with post sends. The SWQE will hold a reference count until the UD SWQE completes and then drops the reference. Fix by removing need to reference count the AH. Add a UD specific allocation to each SWQE entry to cache the necessary information for independent progress. Copy the information during the post send processing. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{hfi1, qib, rdmavt}: Put qp in error state when cq is fullKamenee Arumugam2-5/+45
When a completion queue is full, the associated queue pairs are not put into the error state. According to the IBTA specification, this is a violation. Quote from IBTA spec: C9-218: A Requester Class F error occurs when the CQ is inaccessible or full and an attempt is made to complete a WQE. The Affected QP shall be moved to the error state and affiliated asynchronous errors generated as described in 11.6.3.1 Affiliated Asynchronous Events on page 678. The current WQE and any subsequent WQEs are left in an unknown state. C11-37: The CI shall generate a CQ Error when a CQ overrun is detected. This condition will result in an Affiliated Asynchronous Error for any associated Work Queues when they attempt to use that CQ. Completions can no longer be added to the CQ. It is not guaranteed that completions present in the CQ at the time the error occurred can be retrieved. Possible causes include a CQ overrun or a CQ protection error. Put the qp in error state when cq is full. Implement a state called full to continue to put other associated QPs in error state. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/rdmavt: Fracture single lock used for posting and processing RWQEsKamenee Arumugam1-0/+7
Usage of single lock prevents fetching posted and processing receive work queue entries from progressing simultaneously and impacts overall performance. Fracture the single lock used for posting and processing Receive Work Queue Entries (RWQEs) to allow the circular buffer to be filled and emptied at the same time. Two new spinlocks - one for the producers and one for the consumers used for posting and processing RWQEs simultaneously and the two indices are define on two different cache lines. The threshold count is used to avoid reading other index in different cache line every time. Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Move receive work queue struct into uapi directoryKamenee Arumugam1-21/+31
The rvt_rwqe and rvt_rwq struct elements are shared between rdmavt and the providers but are not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2, The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. Move rvt_rwqe and rvt_rwq struct into rvt-abi.h header in uapi directory. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Move rvt_cq_wc struct into uapi directoryKamenee Arumugam2-6/+48
The rvt_cq_wc struct elements are shared between rdmavt and the providers but not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2 The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. In that case, move rvt_cq_wc struct into the rvt-abi.h header file and create a rvt_k_cq_w for the kernel completion queue. Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28Merge tag 'v5.2-rc6' into rdma.git for-nextJason Gunthorpe3-18/+3
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-25RDMA/netlink: Audit policy settings for netlink attributesDoug Ledford1-0/+6
For all string attributes for which we don't currently accept the element as input, we only use it as output, set the string length to RDMA_NLDEV_ATTR_EMPTY_STRING which is defined as 1. That way we will only accept a null string for that element. This will prevent someone from writing a new input routine that uses the element without also updating the policy to have a valid value. Also while there, make sure the existing entries that are valid have the correct policy, if not, correct the policy. Remove unnecessary checks for nla_strlcpy() overflow once the policy has been set correctly. Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/mlx5: Remove unused IB_WR_REG_SIG_MR codeIsrael Rukshin1-19/+0
IB_WR_REG_SIG_MR is not needed after IB_WR_REG_MR_INTEGRITY was used. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/rw: Use IB_WR_REG_MR_INTEGRITY for PI handoverIsrael Rukshin1-9/+0
Replace the old signature handover API with the new one. The new API simplifes PI handover code complexity for ULPs and improve performance. For RW API it will reduce the maximum number of work requests per task and the need of dealing with multiple MRs (and their registrations and invalidations) per task. All the mappings and registration of the data and the protection buffers is done by the LLD using a single WR and a special MR type (IB_MR_TYPE_INTEGRITY) for the PI handover operation. The setup of the tested benchmark (using iSER ULP): - 2 servers with 24 cores (1 initiator and 1 target) - ConnectX-4/ConnectX-5 adapters - 24 target sessions with 1 LUN each - ramdisk backstore - PI active Performance results running fio (24 jobs, 128 iodepth) using write_generate=1 and read_verify=1 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1243.3K/1182.3K 1725.1K/1680.2K 4k 571233/528835 743293/748259 32k 72388/71086 71789/93573 Using write_generate=0 and read_verify=0 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1572.1K/1427.2K 1823.5K/1724.3K 4k 921992/916194 753772/768267 32k 75052/73960 73180/95484 There is a performance degradation when writing big block sizes. Degradation is caused by the complexity of combining multiple indirections and perform RDMA READ operation from it. This will be fixed in the following patches by reducing the indirections if possible. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Validate integrity handover device capMax Gurtovoy1-0/+1
Protect the case that a ULP tries to allocate a QP with signature enabled flag while the LLD doesn't support this feature. While we're here, also move integrity_en attribute from mlx5_qp to ib_qp as a preparation for adding new integrity API to the rw-API (that is part of ib_core module). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Rename signature qp create flag and signature device capabilityIsrael Rukshin1-2/+2
Rename IB_QP_CREATE_SIGNATURE_EN to IB_QP_CREATE_INTEGRITY_EN and IB_DEVICE_SIGNATURE_HANDOVER to IB_DEVICE_INTEGRITY_HANDOVER. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Add an integrity MR pool supportIsrael Rukshin1-1/+1
This is a preparation for adding new signature API to the rw-API. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/mlx5: Introduce and implement new IB_WR_REG_MR_INTEGRITY work requestMax Gurtovoy1-0/+1
This new WR will be used to perform PI (protection information) handover using the new API. Using the new API, the user will post a single WR that will internally perform all the needed actions to complete PI operation. This new WR will use a memory region that was allocated as IB_MR_TYPE_INTEGRITY and was mapped using ib_map_mr_sg_pi to perform the registration. In the old API, in order to perform a signature handover operation, each ULP should perform the following: 1. Map and register the data buffers. 2. Map and register the protection buffers. 3. Post a special reg WR to configure the signature handover operation layout. 4. Invalidate the signature memory key. 5. Invalidate protection buffers memory key. 6. Invalidate data buffers memory key. In the new API, the mapping of both data and protection buffers is performed using a single call to ib_map_mr_sg_pi function. Also the registration of the buffers and the configuration of the signature operation layout is done by a single new work request called IB_WR_REG_MR_INTEGRITY. This patch implements this operation for mlx5 devices that are capable to offload data integrity generation/validation while performing the actual buffer transfer. This patch will not remove the old signature API that is used by the iSER initiator and target drivers. This will be done in the future. In the internal implementation, for each IB_WR_REG_MR_INTEGRITY work request, we are using a single UMR operation to register both data and protection buffers using KLM's. Afterwards, another UMR operation will describe the strided block format. These will be followed by 2 SET_PSV operations to set the memory/wire domains initial signature parameters passed by the user. In the end of the whole transaction, only the signature memory key (the one that exposed for the RDMA operation) will be invalidated. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/mlx5: Add attr for max number page list length for PI operationMax Gurtovoy1-0/+1
PI offload (protection information) is a feature that each RDMA provider can implement differently. Thus, introduce new device attribute to define the maximal length of the page list for PI fast registration operation. For example, mlx5 driver uses a single internal MR to map both data and protection SGL's, so it's equal to max_fast_reg_page_list_len / 2. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Add signature attrs element for ib_mr structureMax Gurtovoy2-1/+3
This element will describe the needed characteristics for the signature operation per signature enabled memory region (type IB_MR_TYPE_INTEGRITY). Also add meta_length attribute to ib_sig_attrs structure for saving the mapped metadata length (needed for the new API implementation). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce ib_map_mr_sg_pi to map data/protection sgl'sMax Gurtovoy1-0/+9
This function will map the previously dma mapped SG lists for PI (protection information) and data to an appropriate memory region for future registration. The given MR must be allocated as IB_MR_TYPE_INTEGRITY. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce IB_MR_TYPE_INTEGRITY and ib_alloc_mr_integrity APIIsrael Rukshin1-0/+10
This is a preparation for signature verbs API re-design. In the new design a single MR with IB_MR_TYPE_INTEGRITY type will be used to perform the needed mapping for data integrity operations. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Save the MR type in the ib_mr structureMax Gurtovoy1-0/+10
This is a preparation for the signature verbs API change. This change is needed since the MR type will define, in the upcoming patches, the need for allocating internal resources in LLD for signature handover related operations. It will also help to make sure that signature related functions are called with an appropriate MR type and fail otherwise. Also introduce new mr types IB_MR_TYPE_USER, IB_MR_TYPE_DMA and IB_MR_TYPE_DM for correctness. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce new header file for signature operationsMax Gurtovoy2-111/+121
Ease the exhausted ib_verbs.h file and make the code more readable. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-20IB/{rdmavt, qib, hfi1}: Convert to new completion APIMike Marciniszyn1-36/+0
Convert all completions to use the new completion routine that fixes a race between post send and completion where fields from a SWQE can be read after SWQE has been freed. This patch also addresses issues reported in https://marc.info/?l=linux-kernel&m=155656897409107&w=2. The reserved operation path has no need for any barrier. The barrier for the other path is addressed by the smp_load_acquire() barrier. Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-20IB/rdmavt: Add new completion inlineMike Marciniszyn1-0/+72
There is opencoded send completion logic all over all the drivers. We need to convert to this routine to enforce ordering issues for completions. This routine fixes an ordering issue where the read of the SWQE fields necessary for creating the completion can race with a post send if the post send catches a send queue at the edge of being full. Is is possible in that situation to read SWQE fields that are being written. This new routine insures that SWQE fields are read prior to advancing the index that post send uses to determine queue fullness. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-20RDMA: Convert destroy_wq to be voidLeon Romanovsky1-1/+1
All callers of destroy WQ are always success and there is no need to check their return value, so convert destroy_wq to be void. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-18RDMA: Report available cdevs through RDMA_NLDEV_CMD_GET_CHARDEVJason Gunthorpe1-0/+1
Update the struct ib_client for all modules exporting cdevs related to the ibdevice to also implement RDMA_NLDEV_CMD_GET_CHARDEV. All cdevs are now autoloadable and discoverable by userspace over netlink instead of relying on sysfs. uverbs also exposes the DRIVER_ID for drivers that are able to support driver id binding in rdma-core. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-18RDMA: Add NLDEV_GET_CHARDEV to allow char dev discovery and autoloadJason Gunthorpe2-0/+6
Allow userspace to issue a netlink query against the ib_device for something like "uverbs" and get back the char dev name, inode major/minor, and interface ABI information for "uverbs0". Since we are now in netlink this can also trigger a module autoload to make the uverbs device come into existence. Largely this will let us replace searching and reading inside sysfs to setup devices, and provides an alternative (using driver_id) to device name based provider binding for things like rxe. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-17RDMA: Move rdma_node_type to uapi/Jason Gunthorpe1-12/+1
This enum is exposed over the sysfs file 'node_type' and over netlink via RDMA_NLDEV_ATTR_DEV_NODE_TYPE, so declare it in the uapi headers. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Convert CQ allocations to be under core responsibilityLeon Romanovsky1-3/+3
Ensure that CQ is allocated and freed by IB/core and not by drivers. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Clean destroy CQ in drivers do not return errorsLeon Romanovsky1-1/+1
Like all other destroy commands, .destroy_cq() call is not supposed to fail. In all flows, the attempt to return earlier caused to memory leaks. This patch converts .destroy_cq() to do not return any errors. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-10RDMA: Move owner into struct ib_device_opsJason Gunthorpe1-1/+1
This more closely follows how other subsytems work, with owner being a member of the structure containing the function pointers. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move uverbs_abi_ver into struct ib_device_opsJason Gunthorpe1-1/+1
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move driver_id into struct ib_device_opsJason Gunthorpe2-2/+3
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-08Merge tag 'spdx-5.2-rc4' of ↵Linus Torvalds2-18/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21RDMA/core: Make ib_destroy_cq() voidLeon Romanovsky1-2/+2
Kernel destroy CQ flows can't fail and the returned value of ib_destroy_cq() is not interested in those flows. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21RDMA/umem: Move page_shift from ib_umem to ib_odp_umemJason Gunthorpe2-15/+24
This value has always been set to PAGE_SHIFT in the core code, the only thing that does differently was the ODP path. Move the value into the ODP struct and still use it for ODP, but change all the non-ODP things to just use PAGE_SHIFT/PAGE_SIZE/PAGE_MASK directly. Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>