summaryrefslogtreecommitdiffstats
path: root/include/rdma
AgeCommit message (Collapse)AuthorFilesLines
2016-01-19IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headersMoni Shoua1-2/+2
RoCEv2 packets are sent over IP/UDP protocols. The mlx4 driver uses a type of RAW QP to send packets for QP1 and therefore needs to build the network headers below BTH in software. This patch adds option to build QP1 packets with IP and UDP headers if RoCEv2 is requested. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Add definition for the standard RoCE V2 UDP portMoni Shoua1-0/+1
This will be used in hardware device driver when building QP or AH contexts. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Use hop-limit from IP stack for RoCEMatan Barak1-1/+3
Previously, IPV6_DEFAULT_HOPLIMIT was used as the hop limit value for RoCE. Fixing that by taking ip4_dst_hoplimit and ip6_dst_hoplimit as hop limit values. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Rename rdma_addr_find_dmac_by_grhMatan Barak1-2/+3
rdma_addr_find_dmac_by_grh resolves dmac, vlan_id and if_index and downsteram patch will also add hop_limit as an output parameter, thus we rename it to rdma_addr_find_l2_eth_by_grh. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mad: pass ib_mad_send_buf explicitly to the recv_handlerChristoph Hellwig1-0/+2
Stop abusing wr_id and just pass the parameter explicitly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/core: Add cross-channel supportLeon Romanovsky1-0/+11
The cross-channel feature allows to execute WQEs that involve synchronization of I/O operations’ on different QPs. This capability enables to program complex flows with a single function call, hereby significantly reducing overhead associated with I/O processing. Cross-channel operations support is indicated by HCA capability information. The queue pairs can be configured to work as a “sync master queue” or “sync slave queues”. The added flags are: 1. Device capability flag IB_DEVICE_CROSS_CHANNEL for the devices that can perform cross-channel operations. 2. CQ property flag IB_CQ_FLAGS_IGNORE_OVERRUN to disable CQ overrun check. This check is useless in cross-channel scenario. 3. QP property flags to indicate if queues are slave or master: * IB_QP_CREATE_MANAGED_SEND indicates that posted send work requests will not be executed immediately and requires enabling. * IB_QP_CREATE_MANAGED_RECV indicates that posted receive work requests will not be executed immediately and requires enabling. * IB_QP_CREATE_CROSS_CHANNEL declares the QP to work in cross-channel mode. If IB_QP_CREATE_MANAGED_SEND and IB_QP_CREATE_MANAGED_RECV are not provided, this QP will be sync master queue, else it will be sync slave. Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/core: Align coding style of ib_device_cap_flags structureLeon Romanovsky1-30/+30
Modify enum ib_device_cap_flags such that other patches which add new enum values pass strict checkpatch.pl checks. Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/core: Add ib_is_udata_clearedMatan Barak1-0/+27
Extending core and vendor verb commands require us to check that the unknown part of the user's given command is all zeros. Adding ib_is_udata_cleared in order to do so. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/core: Display extended counter set if availableChristoph Lameter1-0/+1
Check if the extended counters are available and if so create the proper extended and additional counters. Signed-off-by: Christoph Lameter <cl@linux.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove the write-only usecnt field from struct ib_mrChristoph Hellwig1-1/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove the struct ib_phys_buf definitionChristoph Hellwig1-5/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove in-kernel support for memory windowsChristoph Hellwig1-83/+0
Remove the unused ib_allow_mw and ib_bind_mw functions, remove the unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw into the uverbs module. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove support for phys MRsChristoph Hellwig1-12/+4
We have stopped using phys MRs in the kernel a while ago, so let's remove all the cruft used to implement them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-By: Devesh Sharma<devesh.sharma@avagotech.com> [ocrdma] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove ib_query_mrChristoph Hellwig1-18/+0
This functionality has no users and was only supported by the staged out EHCA driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: start documenting device capabilitiesChristoph Hellwig1-0/+18
Just IB_DEVICE_LOCAL_DMA_LKEY and IB_DEVICE_MEM_MGT_EXTENSIONS for now as I'm most familar with those. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/cma: Join and leave multicast groups with IGMPMoni Shoua1-0/+2
Since RoCEv2 is a protocol over IP header it is required to send IGMP join and leave requests to the network when joining and leaving multicast groups. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/core: Initialize UD header structure with IP and UDP headersMoni Shoua1-7/+38
ib_ud_header_init() is used to format InfiniBand headers in a buffer up to (but not with) BTH. For RoCE UDP ENCAP it is required that this function would be able to build also IP and UDP headers. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/core: Validate route when we init ahMatan Barak1-3/+7
In order to make sure API users don't try to use SGIDs which don't conform to the routing table, validate the route before searching the RoCE GID table. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/core: Add rdma_network_type to wcSomnath Kotur2-0/+45
Providers should tell IB core the wc's network type. This is used in order to search for the proper GID in the GID table. When using HCAs that can't provide this info, IB core tries to deep examine the packet and extract the GID type by itself. We choose sgid_index and type from all the matching entries in RDMA-CM based on hint from the IP stack and we set hop_limit for the IP packet based on above hint from IP stack. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Somnath Kotur <Somnath.Kotur@Avagotech.Com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/core: Add ROCE_UDP_ENCAP (RoCE V2) typeMatan Barak1-2/+21
Adding RoCE v2 GID type and port type. Vendors which support this type will get their GID table populated with RoCE v2 GIDs automatically. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/core: Add gid_type to gid attributeMatan Barak3-1/+15
In order to support multiple GID types, we need to store the gid_type with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT GID table entries shall have a "GID type" attribute that denotes the L3 Address type". The currently supported GID is IB_GID_TYPE_IB which is also RoCE v1 GID type. This implies that gid_type should be added to roce_gid_table meta-data. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-22Merge branches '4.5/Or-cleanup' and '4.5/rdma-cq' into k.o/for-4.5Doug Ledford1-3/+35
Signed-off-by: Doug Ledford <dledford@redhat.com> Conflicts: drivers/infiniband/ulp/iser/iser_verbs.c
2015-12-22IB/core: Remove ib_query_deviceOr Gerlitz1-3/+0
The copy of the attributes present on the device is now used by all consumers except for uverbs in case of serving user-space query, where dev->query_device is called. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-22IB/core: Save the device attributes on the device structureIra Weiny1-0/+1
This way both the IB core and upper level drivers can access these cached device attributes rather than querying or caching them on their own. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-15Merge branch 'rdma-cq.2' of git://git.infradead.org/users/hch/rdma into ↵Doug Ledford1-3/+35
4.5/rdma-cq Signed-off-by: Doug Ledford <dledford@redhat.com> Conflicts: drivers/infiniband/ulp/srp/ib_srp.c - Conflicts with changes in ib_srp.c introduced during 4.4-rc updates
2015-12-11IB: add a proper completion queue abstractionChristoph Hellwig1-3/+35
This adds an abstraction that allows ULPs to simply pass a completion object and completion callback with each submitted WR and let the RDMA core handle the nitty gritty details of how to handle completion interrupts and poll the CQ. In detail there is a new ib_cqe structure which just contains the completion callback, and which can be used to get at the containing object using container_of. It is pointed to by the WR and WC as an alternative to the wr_id field, similar to how many ULPs already use the field to store a pointer using casts. A driver using the new completion callbacks allocates it's CQs using the new ib_create_cq API, which in addition to the number of CQEs and the completion vectors also takes a mode on how we poll for CQEs. Three modes are available: direct for drivers that never take CQ interrupts and just poll for them, softirq to poll from softirq context using the to be renamed blk-iopoll infrastructure which takes care of rearming and budgeting, or a workqueue for consumer who want to be called from user context. Thanks a lot to Sagi Grimberg who helped reviewing the API, wrote the current version of the workqueue code because my two previous attempts sucked too much and converted the iSER initiator to the new API. Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-12-08IB/mad: Require CM send method for everything except ClassPortInfoHal Rosenstock1-0/+2
Receipt of CM MAD with other than the Send method for an attribute other than the ClassPortInfo attribute is invalid. CM attributes other than ClassPortInfo only use the send method. The SRP initiator does not maintain a timeout policy for CM connect requests relies on the CM layer to do that. The result was that the SRP initiator hung as the connect request never completed. A new SRP target has been observed to respond to Send CM REQ with GetResp of CM REQ with bad status. This is non conformant with IBA spec but exposes a vulnerability in the current MAD/CM code which will respond to the incoming GetResp of CM REQ as if it was a valid incoming Send of CM REQ rather than tossing this on the floor. It also causes the MAD layer not to retransmit the original REQ even though it has not received a REP. Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-07IB/core: use RCU for uverbs id lookupMike Marciniszyn1-0/+1
The current implementation gets a spin_lock, and at any scale with qib and hfi1 post send, the lock contention grows exponentially with the number of QPs. idr_find() is RCU compatibile, so read doesn't need the lock. Change to use rcu_read_lock() and rcu_read_unlock() in __idr_get_uobj(). kfree_rcu() is used to insure a grace period between the idr removal and actual free. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-30IB/core, cma: Make __attribute_const__ declarations sparse-friendlyBart Van Assche2-3/+3
Move the __attribute_const__ declarations such that sparse understands that these apply to the function itself and not to the return type. This avoids that sparse reports error messages like the following: drivers/infiniband/core/verbs.c:73:12: error: symbol 'ib_event_msg' redeclared with different type (originally declared at include/rdma/ib_verbs.h:470) - different modifiers Fixes: 2b1b5b601230 ("IB/core, cma: Nice log-friendly string helpers") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-29IB/core: Remove old fast registration APISagi Grimberg1-54/+0
No callers and no providers left, go ahead and remove it. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-28IB/core: Introduce new fast registration APISagi Grimberg1-0/+44
The new fast registration verb ib_map_mr_sg receives a scatterlist and converts it to a page list under the verbs API thus hiding the specific HW mapping details away from the consumer. The provider drivers are provided with a generic helper ib_sg_to_pages that converts a scatterlist into a vector of page addresses. The drivers can still perform any HW specific page address setting by passing a set_page function pointer which will be invoked for each page address. This allows drivers to avoid keeping a shadow page vectors and convert them to HW specific translations by doing extra copies. This API will allow ULPs to remove the duplicated code of constructing a page vector from a given sg list. The send work request ib_reg_wr also shrinks as it will contain only mr, key and access flags in addition. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Tested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-28Merge branch 'wr-cleanup' into k.o/for-4.4Doug Ledford1-46/+85
2015-10-28IB/cma: Add support for network namespacesGuy Shapiro1-1/+5
Add support for network namespaces in the ib_cma module. This is accomplished by: 1. Adding network namespace parameter for rdma_create_id. This parameter is used to populate the network namespace field in rdma_id_private. rdma_create_id keeps a reference on the network namespace. 2. Using the network namespace from the rdma_id instead of init_net inside of ib_cma, when listening on an ID and when looking for an ID for an incoming request. 3. Decrementing the reference count for the appropriate network namespace when calling rdma_destroy_id. In order to preserve the current behavior init_net is passed when calling from other modules. Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-28IB/addr: Pass network namespace as a parameterGuy Shapiro1-1/+15
Add network namespace support to the ib_addr module. For that, all the address resolution and matching should be done using the appropriate namespace instead of init_net. This is achieved by: 1. Adding an explicit network namespace argument to exported function that require a namespace. 2. Saving the namespace in the rdma_addr_client structure. 3. Using it when calling networking functions. In order to preserve the behavior of calling modules, &init_net is passed as the parameter in calls from other modules. This is modified as namespace support is added on more levels. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21IB/core: Remove smac and vlan id from path recordMatan Barak1-2/+0
The GID cache accompanies every GID with attributes. The GID attributes link the GID with its netdevice, which could be resolved to smac and vlan id easily. Since we've added the netdevice (ifindex and net) to the path record, storing the L2 attributes is duplicated data and hence these attributes are removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21IB/core: Remove smac and vlan id from qp_attr and ah_attrMatan Barak1-9/+4
Smac and vlan id could be resolved from the GID attribute, and thus these attributes aren't needed anymore. Removing them. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21IB/core: Use GID table in AH creation and dmac resolutionMatan Barak1-1/+1
Previously, vlan id and source MAC were used from QP attributes. Since the net device is now stored in the GID attributes, they could be used instead of getting this information from the QP attributes. IB_QP_SMAC, IB_QP_ALT_SMAC, IB_QP_VID and IB_QP_ALT_VID were removed because there is no known libibverbs that uses them. This commit also modifies the vendors (mlx4, ocrdma) drivers in order to use the new approach. ocrdma driver changes were done by Somnath Kotur <Somnath.Kotur@Avagotech.Com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21IB/cache: Add ib_find_gid_by_filter cache APIMatan Barak1-0/+8
GID cache API users might want to search for GIDs with specific attributes rather than just specifying GID, net device and port. This is used in a later patch, where we find the sgid index by L2 Ethernet attributes. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21IB/core: Add netdev to path recordMatan Barak1-0/+10
In order to find the sgid_index, one could just query the IB cache with the correct GID and netdevice. Therefore, instead of storing the L2 attributes directly in the path, we only store the ifindex and net and use them later to get the sgid_index. The vlan_id and smac L2 attributes are removed in a later patch. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21IB/core: Expose and rename ib_find_cached_gid_by_port cache APIMatan Barak1-0/+19
Sometime consumers might want to search for a GID in a specific port. For example, when a WC arrives and we want to search the GID that matches that port - it's better to search only the relevant port. Exposing and renaming ib_cache_gid_find_by_port in order to match the naming convention of the module. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21IB/core: Add netdev and gid attributes paramteres to cacheMatan Barak2-6/+12
Adding an ability to query the IB cache by a netdev and get the attributes of a GID. These parameters are necessary in order to successfully resolve the required GID (when the netdevice is known) and get the Ethernet L2 attributes from a GID. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-21ib_pack.h: Fix commentary IBA reference for CNP in IB opcode enumHal Rosenstock1-1/+1
IBA spec is now 1.3 not 3.1 and vol 1 should be mentioned as there is also vol 2. Signed-off-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-08IB: remove xrc_remote_srq_num from struct ib_send_wrChristoph Hellwig1-1/+0
The field is only initialized in mlx, but never used. If we want to add proper XRC support it should be done with a new struct ib_xrc_wr. This shrinks the various WR structures by another 4 bytes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Haggai Eran <haggaie@mellanox.com>
2015-10-08IB: split struct ib_send_wrChristoph Hellwig1-45/+85
This patch split up struct ib_send_wr so that all non-trivial verbs use their own structure which embedds struct ib_send_wr. This dramaticly shrinks the size of a WR for most common operations: sizeof(struct ib_send_wr) (old): 96 sizeof(struct ib_send_wr): 48 sizeof(struct ib_rdma_wr): 64 sizeof(struct ib_atomic_wr): 96 sizeof(struct ib_ud_wr): 88 sizeof(struct ib_fast_reg_wr): 88 sizeof(struct ib_bind_mw_wr): 96 sizeof(struct ib_sig_handover_wr): 80 And with Sagi's pending MR rework the fast registration WR will also be down to a reasonable size: sizeof(struct ib_fastreg_wr): 64 Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [srp, srpt] Reviewed-by: Chuck Lever <chuck.lever@oracle.com> [sunrpc] Tested-by: Haggai Eran <haggaie@mellanox.com> Tested-by: Sagi Grimberg <sagig@mellanox.com> Tested-by: Steve Wise <swise@opengridcomputing.com>
2015-09-28IB/core: Add support of checksum capability reporting for RC and RAWBodong Wang1-1/+2
Two enum members IB_DEVICE_RC_IP_CSUM and IB_DEVICE_RAW_IP_CSUM are added to ib_device_cap_flags. Device should set these two flags if they support insertion of UDP and TCP checksum on outgoing IPv4 messages and can verify the validity of checksum for incoming IPv4 messages, for RC IPoIB and RAW over Ethernet respectively. They are similar to IB_DEVICE_UD_IP_CSUM. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-19Merge tag 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "The new hfi1 driver in staging/rdma has had a number of fixup patches since being added to the tree. This is the first batch of those fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/hfi: Properly set permissions for user device files IB/hfi1: mask vs shift confusion IB/hfi1: clean up some defines IB/hfi1: info leak in get_ctxt_info() IB/hfi1: fix a locking bug IB/hfi1: checking for NULL instead of IS_ERR IB/hfi1: fix sdma_descq_cnt parameter parsing IB/hfi1: fix copy_to/from_user() error handling IB/hfi1: fix pstateinfo from returning improperly byteswapped value
2015-09-18IB/hfi1: fix pstateinfo from returning improperly byteswapped valueIra Weiny1-2/+2
Byteswap link_width_downgrade_*_active values before sending on the wire. In addition properly define the Port State Info structure. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Christian Gomez <christian.gomez@intel.com> Signed-off-by: Rimmer, Todd <todd.rimmer@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-09Merge tag 'for-linus' of ↵Linus Torvalds8-100/+746
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
2015-09-03IB/core: Move SM class defines from ib_mad.h to ib_smi.hIra Weiny2-45/+47
When the hfi1 driver was added these definitions were moved from the qib driver to ib_mad.h to be used by both qib and hfi1. They should have been moved to ib_smi.h instead. Fixes: d4ab347005fb ("IB/core: Add core header changes needed for OPA") Reviewed-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-03IB/core: Remove unnecessary defines from ib_mad.hIra Weiny1-12/+0
Remove the unused IB_NOTICE_REPRESS_* defines. When the hfi1 driver was added these definitions were moved from the qib driver to ib_mad.h. They should have been removed instead. Fixes: d4ab347005fb ("IB/core: Add core header changes needed for OPA") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 01:59:24 +0000