summaryrefslogtreecommitdiffstats
path: root/include/rdma
AgeCommit message (Collapse)AuthorFilesLines
2014-04-03Merge branches 'core', 'cxgb4', 'ip-roce', 'iser', 'misc', 'mlx4', 'nes', ↵Roland Dreier2-9/+6
'ocrdma', 'qib', 'sgwrapper', 'srp' and 'usnic' into for-next
2014-04-01IB/core: Don't resolve passive side RoCE L2 address in CMA REQ handlerMoni Shoua1-1/+0
The code that resolves the passive side source MAC within the rdma_cm connection request handler was both redundant and buggy, so remove it. It was redundant since later, when an RC QP is modified to RTR state, the resolution will take place in the ib_core module. It was buggy because this callback also deals with UD SIDR exchange, for which we incorrectly looked at the REQ member of the CM event and dereferenced a random value. Fixes: dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-01IB/core: Remove overload in ib_sg_dma*Mike Marciniszyn1-8/+6
The code is replaced by driver specific changes and avoids the pointer NULL test for drivers that don't overload these operations. Suggested-by: <Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Vinod Kumar <vinod.kumar@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07IB/core: Introduce signature verbs APISagi Grimberg1-1/+148
Introduce a verbs interface for signature-related operations. A signature handover operation configures the layouts of data and protection attributes both in memory and wire domains. Signature operations are: - INSERT: Generate and insert protection information when handing over data from input space to output space. - validate and STRIP: Validate protection information and remove it when handing over data from input space to output space. - validate and PASS: Validate protection information and pass it when handing over data from input space to output space. Once the signature handover opration is done, the HCA will offload data integrity generation/validation while performing the actual data transfer. Additions: 1. HCA signature capabilities in device attributes Verbs provider supporting signature handover operations fills relevant fields in device attributes structure returned by ib_query_device. 2. QP creation flag IB_QP_CREATE_SIGNATURE_EN Creating a QP that will carry signature handover operations may require some special preparations from the verbs provider. So we add QP creation flag IB_QP_CREATE_SIGNATURE_EN to declare that the created QP may carry out signature handover operations. Expose signature support to verbs layer (no support for now). 3. New send work request IB_WR_REG_SIG_MR Signature handover work request. This WR will define the signature handover properties of the memory/wire domains as well as the domains layout. The purpose of this work request is to bind all the needed information for the signature operation: - data to be transferred: wr->sg_list (ib_sge). * The raw data, pre-registered to a single MR (normally, before signature, this MR would have been used directly for the data transfer) - data protection guards: sig_handover.prot (ib_sge). * The data protection buffer, pre-registered to a single MR, which contains the data integrity guards of the raw data blocks. Note that it may not always exist, only in cases where the user is interested in storing protection guards in memory. - signature operation attributes: sig_handover.sig_attrs. * Tells the HCA how to validate/generate the protection information. Once the work request is executed, the memory region that will describe the signature transaction will be the sig_mr. The application can now go ahead and send the sig_mr.rkey or use the sig_mr.lkey for data transfer. 4. New Verb ib_check_mr_status check_mr_status verb checks the status of the memory region post transaction. The first check that may be used is IB_MR_CHECK_SIG_STATUS, which will indicate if any signature errors are pending for a specific signature-enabled ib_mr. This verb is a lightwight check and is allowed to be taken from interrupt context. An application must call this verb after it is known that the actual data transfer has finished. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07IB/core: Introduce protected memory regionsSagi Grimberg1-0/+38
This commit introduces verbs for creating/destoying memory regions which will allow new types of memory key operations such as protected memory registration. Indirect memory registration is registering several (one of more) pre-registered memory regions in a specific layout. The Indirect region may potentialy describe several regions and some repitition format between them. Protected Memory registration is registering a memory region with various data integrity attributes which will describe protection schemes that will be handled by the HCA in an offloaded manner. These memory regions will be applicable for a new REG_SIG_MR work request introduced later in this patchset. In the future these routines may replace or implement current memory regions creation routines existing today: - ib_reg_user_mr - ib_alloc_fast_reg_mr - ib_get_dma_mr - ib_dereg_mr Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-04IB: Refactor umem to use linear SG tableYishai Hadas1-8/+3
This patch refactors the IB core umem code and vendor drivers to use a linear (chained) SG table instead of chunk list. With this change the relevant code becomes clearer—no need for nested loops to build and use umem. Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB: Report using RoCE IP based gids in port capsMoni Shoua1-1/+2
For userspace RoCE UD QPs we need to know the GID format that the kernel uses, e.g when working over older kernels. For that end, add a new port capability IB_PORT_IP_BASED_GIDS and report it when query port is issued. Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22Merge branch 'ip-roce' into for-nextRoland Dreier5-22/+73
Conflicts: drivers/infiniband/hw/mlx4/main.c
2014-01-22Merge branches 'cma', 'cxgb4', 'flowsteer', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier1-2/+19
'ocrdma', 'qib', 'srp' and 'usnic' into for-next
2014-01-18IB/cma: IBoE (RoCE) IP-based GID addressingMoni Shoua1-23/+12
Currently, the IB core and specifically the RDMA-CM assumes that IBoE (RoCE) gids encode related Ethernet netdevice interface MAC address and possibly VLAN id. Change GIDs to be treated as they encode interface IP address. Since Ethernet layer 2 address parameters are not longer encoded within gids, we have to extend the Infiniband address structures (e.g. ib_ah_attr) with layer 2 address parameters, namely mac and vlan. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-18IB/core: Add support for RDMA_NODE_USNIC_UDPUpinder Malhi1-0/+1
Add the complementary RDMA_NODE_USNIC_UDP for RDMA_TRANSPORT_USNIC_UDP. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/core: Ethernet L2 attributes in verbs/cm structuresMatan Barak5-3/+65
This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/core: Add support for IB L2 device-managed steeringMatan Barak1-1/+15
This patch adds preliminary support for IB L2 device-managed steering, currently exposed only in the kernel. This flow spec can be used by low-level drivers that need to indicate the link layer type when creating device-managed flow rules. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/core: Add flow steering support for IPoIB UD trafficMatan Barak1-0/+1
When creating an IPoIB UD QP, provide a hint to the low level driver that the QP should support flow-steering. This means that privileged user space applications can steer TCP/IP IPoIB traffic from the network stack, in a similar manner done with Ethernet RAW_PACKET QPs. The hint is provided through new QP creation flag called NETIF_QP. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/core: Add RDMA_TRANSPORT_USNIC_UDPUpinder Malhi1-1/+2
Add RDMA_TRANSPORT_USNIC_UDP which will be used by usNIC. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-16IB/core: const'ify inbuf in struct ib_udataYann Droneaud1-1/+1
Userspace input buffer is not modified by kernel, so it can be 'const'. This is also a prerequisite to remove the implicit cast from INIT_UDATA(). Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-17Merge branches 'cma', 'cxgb4', 'flowsteer', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier1-2/+18
'nes', 'ocrdma', 'qib' and 'srp' into for-next
2013-11-17IB/core: extended command: an improved infrastructure for uverbs commandsYann Droneaud1-0/+1
Commit 400dbc96583f ("IB/core: Infrastructure for extensible uverbs commands") added an infrastructure for extensible uverbs commands while later commit 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs") exported ib_create_flow()/ib_destroy_flow() functions using this new infrastructure. According to the commit 400dbc96583f, the purpose of this infrastructure is to support passing around provider (eg. hardware) specific buffers when userspace issue commands to the kernel, so that it would be possible to extend uverbs (eg. core) buffers independently from the provider buffers. But the new kernel command function prototypes were not modified to take advantage of this extension. This issue was exposed by Roland Dreier in a previous review[1]. So the following patch is an attempt to a revised extensible command infrastructure. This improved extensible command infrastructure distinguish between core (eg. legacy)'s command/response buffers from provider (eg. hardware)'s command/response buffers: each extended command implementing function is given a struct ib_udata to hold core (eg. uverbs) input and output buffers, and another struct ib_udata to hold the hw (eg. provider) input and output buffers. Having those buffers identified separately make it easier to increase one buffer to support extension without having to add some code to guess the exact size of each command/response parts: This should make the extended functions more reliable. Additionally, instead of relying on command identifier being greater than IB_USER_VERBS_CMD_THRESHOLD, the proposed infrastructure rely on unused bits in command field: on the 32 bits provided by command field, only 6 bits are really needed to encode the identifier of commands currently supported by the kernel. (Even using only 6 bits leaves room for about 23 new commands). So this patch makes use of some high order bits in command field to store flags, leaving enough room for more command identifiers than one will ever need (eg. 256). The new flags are used to specify if the command should be processed as an extended one or a legacy one. While designing the new command format, care was taken to make usage of flags itself extensible. Using high order bits of the commands field ensure that newer libibverbs on older kernel will properly fail when trying to call extended commands. On the other hand, older libibverbs on newer kernel will never be able to issue calls to extended commands. The extended command header includes the optional response pointer so that output buffer length and output buffer pointer are located together in the command, allowing proper parameters checking. This should make implementing functions easier and safer. Additionally the extended header ensure 64bits alignment, while making all sizes multiple of 8 bytes, extending the maximum buffer size: legacy extended Maximum command buffer: 256KBytes 1024KBytes (512KBytes + 512KBytes) Maximum response buffer: 256KBytes 1024KBytes (512KBytes + 512KBytes) For the purpose of doing proper buffer size accounting, the headers size are no more taken in account in "in_words". One of the odds of the current extensible infrastructure, reading twice the "legacy" command header, is fixed by removing the "legacy" command header from the extended command header: they are processed as two different parts of the command: memory is read once and information are not duplicated: it's making clear that's an extended command scheme and not a different command scheme. The proposed scheme will format input (command) and output (response) buffers this way: - command: legacy header + extended header + command data (core + hw): +----------------------------------------+ | flags | 00 00 | command | | in_words | out_words | +----------------------------------------+ | response | | response | | provider_in_words | provider_out_words | | padding | +----------------------------------------+ | | . <uverbs input> . . (in_words * 8) . | | +----------------------------------------+ | | . <provider input> . . (provider_in_words * 8) . | | +----------------------------------------+ - response, if present: +----------------------------------------+ | | . <uverbs output space> . . (out_words * 8) . | | +----------------------------------------+ | | . <provider output space> . . (provider_out_words * 8) . | | +----------------------------------------+ The overall design is to ensure that the extensible infrastructure is itself extensible while begin more reliable with more input and bound checking. Note: The unused field in the extended header would be perfect candidate to hold the command "comp_mask" (eg. bit field used to handle compatibility). This was suggested by Roland Dreier in a previous review[2]. But "comp_mask" field is likely to be present in the uverb input and/or provider input, likewise for the response, as noted by Matan Barak[3], so it doesn't make sense to put "comp_mask" in the header. [1]: http://marc.info/?i=CAL1RGDWxmM17W2o_era24A-TTDeKyoL6u3NRu_=t_dhV_ZA9MA@mail.gmail.com [2]: http://marc.info/?i=CAL1RGDXJtrc849M6_XNZT5xO1+ybKtLWGq6yg6LhoSsKpsmkYA@mail.gmail.com [3]: http://marc.info/?i=525C1149.6000701@mellanox.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com [ Convert "ret ? ret : 0" to the equivalent "ret". - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-15IB/core: Encorce MR access rights rules on kernel consumersEli Cohen1-0/+13
Enforce the rule that when requesting remote write or atomic permissions, local write must be indicated as well. See IB spec 11.2.8.2. Spotted by: Hagay Abramovsky <hagaya@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-09IB/core: Add Cisco usNIC rdma node and transport typesUpinder Malhi \(umalhi\)1-2/+4
This patch adds new rdma node and new rdma transport, and supporting code used by Cisco's low latency driver called usNIC. usNIC uses its own transport, distinct from IB and iWARP. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Jeff Squyres <jsquyres@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-03Merge branches 'cxgb4', 'flowsteer', 'ipoib', 'iser', 'mlx4', 'ocrdma' and ↵Roland Dreier1-2/+126
'qib' into for-next
2013-09-02IB/core: Better checking of userspace values for receive flow steeringMatan Barak1-0/+2
- Don't allow unsupported comp_mask values, user should check ibv_query_device to know which features are supported. - Add a check in ib_uverbs_create_flow() to verify the size passed from the user space. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-28IB/core: Export ib_create/destroy_flow through uverbsHadar Hen Zion1-0/+1
Implement ib_uverbs_create_flow() and ib_uverbs_destroy_flow() to support flow steering for user space applications. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-28IB/core: Add receive flow steering supportHadar Hen Zion1-2/+117
The RDMA stack allows for applications to create IB_QPT_RAW_PACKET QPs, which receive plain Ethernet packets, specifically packets that don't carry any QPN to be matched by the receiving side. Applications using these QPs must be provided with a method to program some steering rule with the HW so packets arriving at the local port can be routed to them. This patch adds ib_create_flow(), which allow providing a flow specification for a QP. When there's a match between the specification and a received packet, the packet is forwarded to that QP, in a the same way one uses ib_attach_multicast() for IB UD multicast handling. Flow specifications are provided as instances of struct ib_flow_spec_yyy, which describe L2, L3 and L4 headers. Currently specs for Ethernet, IPv4, TCP and UDP are defined. Flow specs are made of values and masks. The input to ib_create_flow() is a struct ib_flow_attr, which contains a few mandatory control elements and optional flow specs. struct ib_flow_attr { enum ib_flow_attr_type type; u16 size; u16 priority; u32 flags; u8 num_of_specs; u8 port; /* Following are the optional layers according to user request * struct ib_flow_spec_yyy * struct ib_flow_spec_zzz */ }; As these specs are eventually coming from user space, they are defined and used in a way which allows adding new spec types without kernel/user ABI change, just with a little API enhancement which defines the newly added spec. The flow spec structures are defined with TLV (Type-Length-Value) entries, which allows calling ib_create_flow() with a list of variable length of optional specs. For the actual processing of ib_flow_attr the driver uses the number of specs and the size mandatory fields along with the TLV nature of the specs. Steering rules processing order is according to the domain over which the rule is set and the rule priority. All rules set by user space applicatations fall into the IB_FLOW_DOMAIN_USER domain, other domains could be used by future IPoIB RFS and Ethetool flow-steering interface implementation. Lower numerical value for the priority field means higher priority. The returned value from ib_create_flow() is a struct ib_flow, which contains a database pointer (handle) provided by the HW driver to be used when calling ib_destroy_flow(). Applications that offload TCP/IP traffic can also be written over IB UD QPs. The ib_create_flow() / ib_destroy_flow() API is designed to support UD QPs too. A HW driver can set IB_DEVICE_MANAGED_FLOW_STEERING to denote support for flow steering. The ib_flow_attr enum type supports usage of flow steering for promiscuous and sniffer purposes: IB_FLOW_ATTR_NORMAL - "regular" rule, steering according to rule specification IB_FLOW_ATTR_ALL_DEFAULT - default unicast and multicast rule, receive all Ethernet traffic which isn't steered to any QP IB_FLOW_ATTR_MC_DEFAULT - same as IB_FLOW_ATTR_ALL_DEFAULT but only for multicast IB_FLOW_ATTR_SNIFFER - sniffer rule, receive all port traffic ALL_DEFAULT and MC_DEFAULT rules options are valid only for Ethernet link type. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13IB/core: Add locking around event dispatching on XRC target QPsYishai Hadas1-0/+6
Fix a potential race when event occurrs on a target XRC QP and in the middle of reporting that on its shared qps, one of them is destroyed by user space application. Also add note for kernel consumers in ib_verbs.h that they must not destroy the QP from within the handler. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/cma: Add IPv6 support for iWARPSteve Wise1-4/+4
Modify the type of local_addr and remote_addr fields in struct iw_cm_id from struct sockaddr_in to struct sockaddr_storage to hold IPv6 and IPv4 addresses uniformly. Change the references of local_addr and remote_addr in cxgb4, cxgb3, nes and amso drivers to match this. However to be able to actully run traffic over IPv6, low-level drivers have to add code to support this. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> [ Fix unused variable warnings when INFINIBAND_NES_DEBUG not set. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-08Merge branches 'af_ib', 'cxgb4', 'misc', 'mlx5', 'ocrdma', 'qib' and 'srp' ↵Roland Dreier1-2/+33
into for-next
2013-07-07IB/core: Add reserved values to enums for low-level driver useJack Morgenstein1-2/+33
Continue the approach taken by commit d2b57063e4a ("IB/core: Reserve bits in enum ib_qp_create_flags for low-level driver use") and add reserved entries to the ib_qp_type and ib_wr_opcode enums. Low-level drivers can then define macros to use these reserved values, giving proper names to the macros for readability. Also add a range of reserved flags to enum ib_send_flags. The mlx5 IB driver uses the new additions. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/cma: Export cma_get_service_id()Sean Hefty1-0/+7
Allow the rdma_ucm to query the IB service ID formed or allocated by the rdma_cm by exporting the cma_get_service_id() functionality. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20IB/sa: Export function to pack a path record into wire formatSean Hefty1-0/+7
Allow converting from struct ib_sa_path_rec to the IB defined SA path record wire format. This will be used to report path data from the rdma cm into user space. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/cma: Set qkey for AF_IBSean Hefty1-0/+1
Allow the user to specify the qkey when using AF_IB. The qkey is added to struct rdma_ucm_conn_param in place of a reserved field, but for backwards compatability, is only accessed if the associated rdma_cm_id is using AF_IB. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/cma: Update port reservation to support AF_IBSean Hefty1-0/+5
The AF_IB uses a 64-bit service id (SID), which the user can control through the use of a mask. The rdma_cm will assign values to the unmasked portions of the SID based on the selected port space and port number. Because the IB spec divides the SID range into several regions, a SID/mask combination may fall into one of the existing port space ranges as defined by the RDMA CM IP Annex. Map the AF_IB SID to the correct RDMA port space. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20IB/addr: Add AF_IB support to ip_addr_sizeSean Hefty1-5/+1
Add support for AF_IB to ip_addr_size, and rename the function to account for the change. Give the compiler more control over whether the call should be inline or not by moving the definition into the .c file, removing the static inline, and exporting it. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/cma: Define native IB addressSean Hefty1-0/+89
Define AF_IB and sockaddr_ib to allow the rdma_cm to use native IB addressing. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-21IB/core: Add "type 2" memory windows supportShani Michaeli1-9/+64
This patch enhances the IB core support for Memory Windows (MWs). MWs allow an application to have better/flexible control over remote access to memory. Two types of MWs are supported, with the second type having two flavors: Type 1 - associated with PD only Type 2A - associated with QPN only Type 2B - associated with PD and QPN Applications can allocate a MW once, and then repeatedly bind the MW to different ranges in MRs that are associated to the same PD. Type 1 windows are bound through a verb, while type 2 windows are bound by posting a work request. The 32-bit memory key is composed of a 24-bit index and an 8-bit key. The key is changed with each bind, thus allowing more control over the peer's use of the memory key. The changes introduced are the following: * add memory window type enum and a corresponding parameter to ib_alloc_mw. * type 2 memory window bind work request support. * create a struct that contains the common part of the bind verb struct ibv_mw_bind and the bind work request into a single struct. * add the ib_inc_rkey helper function to advance the tag part of an rkey. Consumer interface details: * new device capability flags IB_DEVICE_MEM_WINDOW_TYPE_2A and IB_DEVICE_MEM_WINDOW_TYPE_2B are added to indicate device support for these features. Devices can set either IB_DEVICE_MEM_WINDOW_TYPE_2A or IB_DEVICE_MEM_WINDOW_TYPE_2B if it supports type 2A or type 2B memory windows. It can set neither to indicate it doesn't support type 2 windows at all. * modify existing provides and consumers code to the new param of ib_alloc_mw and the ib_mw_bind_info structure Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-01-02UAPI: Remove empty Kbuild filesDavid Howells1-0/+0
Empty files can get deleted by the patch program, so remove empty Kbuild files and their links from the parent Kbuilds. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-22UAPI: (Scripted) Disintegrate include/rdmaDavid Howells7-1628/+1
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-07infiniband: pass rdma_cm module to netlink_dump_startGao feng1-0/+1
set netlink_dump_control.module to avoid panic. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30IB/core: Add ib_find_exact_cached_pkey()Jack Morgenstein1-0/+16
When P_Key tables potentially contain both full and partial membership copies for the same P_Key, we need a function to find the index for an exact (16-bit) P_Key. This is necessary when the master forwards QP1 MADs sent by guests. If the guest has sent the MAD with a limited membership P_Key, we need to to forward the MAD using the same limited membership P_Key. Since the master may have both the limited and the full member P_Keys in its table, we must make sure to retrieve the limited membership P_Key in this case. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30IB/core: Reserve bits in enum ib_qp_create_flags for low-level driver useJack Morgenstein1-0/+3
Reserve bits 26-31 for internal use by low-level drivers. Two such bits are used in the mlx4_b driver SR-IOV implementation. These enum additions guarantee that the core layer will never use these bits, so that low level drivers may safely make use of them. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-22Merge branches 'cma', 'cxgb4', 'misc', 'mlx4-sriov', 'mlx-cleanups', ↵Roland Dreier2-0/+45
'ocrdma' and 'qib' into for-linus
2012-07-08IB/core: Move CM_xxx_ATTR_ID macros from cm_msgs.h to ib_cm.hJack Morgenstein1-0/+12
These macros will be reused by the mlx4 SRIOV-IB CM paravirtualization code, and there is no reason to have them declared both in the IB core in the mlx4 IB driver. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-08IB/sa: Add GuidInfoRecord query supportErez Shitrit1-0/+33
This query is needed for SRIOV alias GUID support. The query is implemented per the IB Spec definition in section 15.2.5.18 (GuidInfoRecord). Signed-off-by: Erez Shitrit <erezsh@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-08RDMA/cma: Allow user to restrict listens to bound address familySean Hefty2-0/+11
Provide an option for the user to specify that listens should only accept connections where the incoming address family matches that of the locally bound address. This is used to support the equivalent of IPV6_V6ONLY socket option, which allows an app to only accept connection requests directed to IPv6 addresses. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-21Merge branches 'core', 'cxgb4', 'ipath', 'iser', 'lockdep', 'mlx4', 'nes', ↵Roland Dreier1-1/+1
'ocrdma', 'qib' and 'raw-qp' into for-linus
2012-05-18IB/core: Fix IB_SA_COMP_MASK macroJack Morgenstein1-1/+1
It needs parentheses around the argument, so that it can be used with complex arguments (e.g., "n+5"). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08IB/core: Add raw packet QP typeOr Gerlitz1-1/+1
IB_QPT_RAW_PACKET allows applications to build a complete packet, including L2 headers, when sending; on the receive side, the HW will not strip any headers. This QP type is designed for userspace direct access to Ethernet; for example by applications that do TCP/IP themselves. Only processes with the NET_RAW capability are allowed to create raw packet QPs (the name "raw packet QP" is supposed to suggest an analogy to AF_PACKET / SOL_RAW sockets). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08IB/core: Use qp->usecnt to track multicast attach/detachOr Gerlitz1-1/+1
Just as we don't allow PDs, CQs, etc. to be destroyed if there are QPs that are attached to them, don't let a QP be destroyed if there are multicast group(s) attached to it. Use the existing usecnt field of struct ib_qp which was added by commit 0e0ec7e ("RDMA/core: Export ib_open_qp() to share XRC TGT QPs") to track this. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-03-19Merge branches 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iser', 'mad', 'nes', 'qib', ↵Roland Dreier1-0/+9
'srp' and 'srpt' into for-next
2012-03-08IB: Change CQE "csum_ok" field to a bit flagOr Gerlitz1-1/+1
Use a bit in wc_flags rather then a whole integer to hold the "checksum OK" flag. By itself, this change doesn't reduce the size of struct ib_wc on 64bit machines -- it stays on 56 bytes because of padding. However, it will allow to add more fields in the future without enlarging the struct. Also, it will let us have a unified approach with future libibverbs checksum offload reporting, because a bit flag doesn't break the library ABI. This patch was suggested during conversation with Liran Liss <liranl@mellanox.com>. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>