summaryrefslogtreecommitdiffstats
path: root/include/rdma/rdmavt_qp.h
AgeCommit message (Collapse)AuthorFilesLines
2021-08-03RDMA/rdmavt: Decouple QP and SGE lists allocationsLeon Romanovsky1-1/+1
The rdmavt QP has fields that are both needed for the control and data path. Such mixed declaration caused to the very specific allocation flow with kzalloc_node and SGE list embedded into the struct rvt_qp. This patch separates QP creation to two: regular memory allocation for the control path and specific code for the SGE list, while the access to the later is performed through derefenced pointer. Such pointer and its context are expected to be in the cache, so performance difference is expected to be negligible, if any exists. Link: https://lore.kernel.org/r/f66c1e20ccefba0db3c69c58ca9c897f062b4d1c.1627040189.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-46/+4
Pull rdma updates from Jason Gunthorpe: "A quiet cycle after the larger 5.8 effort. Substantially cleanup and driver work with a few smaller features this time. - Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re - Removal of dead or redundant code across the drivers - RAW resource tracker dumps to include a device specific data blob for device objects to aide device debugging - Further advance the IOCTL interface, remove the ability to turn it off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands - Remove stubs related to devices with no pkey table - A shared CQ scheme to allow multiple ULPs to share the CQ rings of a device to give higher performance - Several more static checker, syzkaller and rare crashers fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits) RDMA/mlx5: Fix flow destination setting for RDMA TX flow table RDMA/rxe: Remove pkey table RDMA/umem: Add a schedule point in ib_umem_get() RDMA/hns: Fix the unneeded process when getting a general type of CQE error RDMA/hns: Fix error during modify qp RTS2RTS RDMA/hns: Delete unnecessary memset when allocating VF resource RDMA/hns: Remove redundant parameters in set_rc_wqe() RDMA/hns: Remove support for HIP08_A RDMA/hns: Refactor hns_roce_v2_set_hem() RDMA/hns: Remove redundant hardware opcode definitions RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP RDMA/include: Replace license text with SPDX tags RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting RDMA/cma: Execute rdma_cm destruction from a handler properly RDMA/cma: Remove unneeded locking for req paths RDMA/cma: Using the standard locking pattern when delivering the removal event RDMA/cma: Simplify DEVICE_REMOVAL for internal_id RDMA/efa: Add EFA 0xefa1 PCI ID RDMA/efa: User/kernel compatibility handshake mechanism ...
2020-07-29IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQEMike Marciniszyn1-0/+19
The lookaside count is improperly initialized to the size of the Receive Queue with the additional +1. In the traces below, the RQ size is 384, so the count was set to 385. The lookaside count is then rarely refreshed. Note the high and incorrect count in the trace below: rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385 rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1 The head,tail indicate there is only one RWQE posted although the count says 385 and we correctly return the element 0. The next call to rvt_get_rwqe with the decremented count: rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384 rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1 Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1, which is not valid because of the bogus high count. Best case, the RWQE has never been posted and the rc logic sees an RWQE that is too small (all zeros) and puts the QP into an error state. In the worst case, a server slow at posting receive buffers might fool rvt_get_rwqe() into fetching an old RWQE and corrupt memory. Fix by deleting the faulty initialization code and creating an inline to fetch the posted count and convert all callers to use new inline. Fixes: f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs") Link: https://lore.kernel.org/r/20200728183848.22226.29132.stgit@awfm-01.aw.intel.com Reported-by: Zhaojuan Guo <zguo@redhat.com> Cc: <stable@vger.kernel.org> # 5.4.x Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-29RDMA/include: Replace license text with SPDX tagsLeon Romanovsky1-46/+4
The header files in RDMA subsystem are dual licensed and can be described by simple SPDX tag, so replace all of them at once together with making them use the same coding style for header guard defines. Link: https://lore.kernel.org/r/20200719072521.135260-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-05-21IB/hfi1: Remove module parameter for KDETH qpnsGary Leshner1-1/+28
The module parameter for KDETH qpns is being removed in favor of always using the default value of 0x80 as the qpn prefix. Defines have been added for various KDETH values including the prefix of 0x80. The reserved range now starts at the base value for KDETH qpns (0x80) and extends up to and including the last qpn for other reserved QP prefixed types. Adjust other QP prefixed define names to match KDETH defined names. Link: https://lore.kernel.org/r/20200511160600.173205.27508.stgit@awfm-01.aw.intel.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-13IB/rdmavt: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200507185342.GA14476@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-20RDMA: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200213010425.GA13068@embeddedor.com Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> # added a few more
2020-01-03IB/rdmavt: Correct comments in rdmavt_qp.h headerMike Marciniszyn1-21/+1
Comments need to be with the definition of rvt_restart_sge(). Other comments were duplicated in sw/rdmavt/rc.c and were removed. Fixes: 385156c5f2a6 ("IB/hfi: Move RC functions into a header file") Link: https://lore.kernel.org/r/20191219211934.58387.88014.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/{rdmavt, hfi1, qib}: Add a counter for credit waitsKaike Wan1-0/+35
This patch adds a counter for credit waits to assist field debugging. Link: https://lore.kernel.org/r/20190911113047.126040.10857.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22IB/hfi1: Unreserve a flushed OPFN requestKaike Wan1-5/+4
When an OPFN request is flushed, the request is completed without unreserving itself from the send queue. Subsequently, when a new request is post sent, the following warning will be triggered: WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt] Call Trace: [<ffffffffbbb61e41>] dump_stack+0x19/0x1b [<ffffffffbb497688>] __warn+0xd8/0x100 [<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20 [<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt] [<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0 [<ffffffffbb61d645>] ? __kmalloc+0x55/0x230 [<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs] [<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs] [<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs] [<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0 [<ffffffffbb641650>] vfs_write+0xc0/0x1f0 [<ffffffffbb64246f>] SyS_write+0x7f/0xf0 [<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27 This patch fixes the problem by moving rvt_qp_wqe_unreserve() into rvt_qp_complete_swqe() to simplify the code and make it less error-prone. Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed") Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{rdmavt, hfi1, qib}: Add helpers to hide SWQE WR detailsMichael J. Ruhl1-0/+50
Add some helper functions to hide struct rvt_swqe details. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPsMichael J. Ruhl1-3/+19
Historically rdmavt destroy_ah() has returned an -EBUSY when the AH has a non-zero reference count. IBTA 11.2.2 notes no such return value or error case: Output Modifiers: - Verb results: - Operation completed successfully. - Invalid HCA handle. - Invalid address handle. ULPs never test for this error and this will leak memory. The reference count exists to allow for driver independent progress mechanisms to process UD SWQEs in parallel with post sends. The SWQE will hold a reference count until the UD SWQE completes and then drops the reference. Fix by removing need to reference count the AH. Add a UD specific allocation to each SWQE entry to cache the necessary information for independent progress. Copy the information during the post send processing. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{hfi1, qib, rdmavt}: Put qp in error state when cq is fullKamenee Arumugam1-4/+43
When a completion queue is full, the associated queue pairs are not put into the error state. According to the IBTA specification, this is a violation. Quote from IBTA spec: C9-218: A Requester Class F error occurs when the CQ is inaccessible or full and an attempt is made to complete a WQE. The Affected QP shall be moved to the error state and affiliated asynchronous errors generated as described in 11.6.3.1 Affiliated Asynchronous Events on page 678. The current WQE and any subsequent WQEs are left in an unknown state. C11-37: The CI shall generate a CQ Error when a CQ overrun is detected. This condition will result in an Affiliated Asynchronous Error for any associated Work Queues when they attempt to use that CQ. Completions can no longer be added to the CQ. It is not guaranteed that completions present in the CQ at the time the error occurred can be retrieved. Possible causes include a CQ overrun or a CQ protection error. Put the qp in error state when cq is full. Implement a state called full to continue to put other associated QPs in error state. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/rdmavt: Fracture single lock used for posting and processing RWQEsKamenee Arumugam1-0/+7
Usage of single lock prevents fetching posted and processing receive work queue entries from progressing simultaneously and impacts overall performance. Fracture the single lock used for posting and processing Receive Work Queue Entries (RWQEs) to allow the circular buffer to be filled and emptied at the same time. Two new spinlocks - one for the producers and one for the consumers used for posting and processing RWQEs simultaneously and the two indices are define on two different cache lines. The threshold count is used to avoid reading other index in different cache line every time. Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Move receive work queue struct into uapi directoryKamenee Arumugam1-21/+31
The rvt_rwqe and rvt_rwq struct elements are shared between rdmavt and the providers but are not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2, The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. Move rvt_rwqe and rvt_rwq struct into rvt-abi.h header in uapi directory. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Move rvt_cq_wc struct into uapi directoryKamenee Arumugam1-0/+32
The rvt_cq_wc struct elements are shared between rdmavt and the providers but not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2 The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. In that case, move rvt_cq_wc struct into the rvt-abi.h header file and create a rvt_k_cq_w for the kernel completion queue. Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-20IB/{rdmavt, qib, hfi1}: Convert to new completion APIMike Marciniszyn1-36/+0
Convert all completions to use the new completion routine that fixes a race between post send and completion where fields from a SWQE can be read after SWQE has been freed. This patch also addresses issues reported in https://marc.info/?l=linux-kernel&m=155656897409107&w=2. The reserved operation path has no need for any barrier. The barrier for the other path is addressed by the smp_load_acquire() barrier. Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-20IB/rdmavt: Add new completion inlineMike Marciniszyn1-0/+72
There is opencoded send completion logic all over all the drivers. We need to convert to this routine to enforce ordering issues for completions. This routine fixes an ordering issue where the read of the SWQE fields necessary for creating the completion can race with a post send if the post send catches a send queue at the edge of being full. Is is possible in that situation to read SWQE fields that are being written. This new routine insures that SWQE fields are read prior to advancing the index that post send uses to determine queue fullness. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-04-24IB/{rdmavt, qib, hfi1}: Use new routine to release reference countsMike Marciniszyn1-0/+14
The reference count adjustments on reference count completion are open coded throughout. Add a routine to do all reference count adjustments and use. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24IB/rdmavt: Fix ab/ba include issuesMike Marciniszyn1-14/+60
The currently include file ordering for rdmavt headers has an ab/ba include issue the precludes using inlines from rdma_vt.h in rdmavt_qp.h. At the heart of the issue is that rdma_vt.h includes rdmavt_qp.h. Fix the ordering issue by adjusting rdma_vt.h to not require rdmavt_qp.h and move qp related inlines to rdmavt_qp.h. Additionally, promote rvt_mmap_info to rdma_vt.h since it is shared by rdmavt_cq.h and rdmavt_qp.h. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24IB/{rdmavt, hfi1): Miscellaneous comment fixesKaike Wan1-1/+0
This patch fixes miscellaneous comment errors. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-05IB/hfi1: Add TID RDMA WRITE functionality into RDMA verbsKaike Wan1-0/+1
This patch integrates TID RDMA WRITE protocol into normal RDMA verbs framework. The TID RDMA WRITE protocol is an end-to-end protocol between the hfi1 drivers on two OPA nodes that converts a qualified RDMA WRITE request into a TID RDMA WRITE request to avoid data copying on the responder side. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Add an s_acked_ack_queue pointerKaike Wan1-0/+1
The s_ack_queue is managed by two pointers into the ring: r_head_ack_queue and s_tail_ack_queue. r_head_ack_queue is the index of where the next received request is going to be placed and s_tail_ack_queue is the entry of the request currently being processed. This works perfectly fine for normal Verbs as the requests are processed one at a time and the s_tail_ack_queue is not moved until the request that it points to is fully completed. In this fashion, s_tail_ack_queue constantly chases r_head_ack_queue and the two pointers can easily be used to determine "queue full" and "queue empty" conditions. The detection of these two conditions are imported in determining when an old entry can safely be overwritten with a new received request and the resources associated with the old request be safely released. When pipelined TID RDMA WRITE is introduced into this mix, things look very different. r_head_ack_queue is still the point at which a newly received request will be inserted, s_tail_ack_queue is still the currently processed request. However, with pipelined TID RDMA WRITE requests, s_tail_ack_queue moves to the next request once all TID RDMA WRITE responses for that request have been sent. The rest of the protocol for a particular request is managed by other pointers specific to TID RDMA - r_tid_tail and r_tid_ack - which point to the entries for which the next TID RDMA DATA packets are going to arrive and the request for which the next TID RDMA ACK packets are to be generated, respectively. What this means is that entries in the ring, which are "behind" s_tail_ack_queue (entries which s_tail_ack_queue has gone past) are no longer considered complete. This is where the problem is - a newly received request could potentially overwrite a still active TID RDMA WRITE request. The reason why the TID RDMA pointers trail s_tail_ack_queue is that the normal Verbs send engine uses s_tail_ack_queue as the pointer for the next response. Since TID RDMA WRITE responses are processed by the normal Verbs send engine, s_tail_ack_queue had to be moved to the next entry once all TID RDMA WRITE response packets were sent to get the desired pipelining between requests. Doing otherwise would mean that the normal Verbs send engine would not be able to send the TID RDMA WRITE responses for the next TID RDMA request until the current one is fully completed. This patch introduces the s_acked_ack_queue index to point to the next request to complete on the responder side. For requests other than TID RDMA WRITE, s_acked_ack_queue should always be kept in sync with s_tail_ack_queue. For TID RDMA WRITE request, it may fall behind s_tail_ack_queue. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Increment the retry timeout value for TID RDMA READ requestKaike Wan1-1/+5
The RC retry timeout value is based on the estimated time for the response packet to come back. However, for TID RDMA READ request, due to the use of header suppression, the driver is normally not notified for each incoming response packet until the last TID RDMA READ response packet. Consequently, the retry timeout value should be extended to cover the transaction time for the entire length of a segment (default 256K) instead of that for a single packet. This patch addresses the issue by introducing new retry timer functions to account for multiple packets and wrapper functions for backward compatibility. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: TID RDMA RcvArray programming and TID allocationKaike Wan1-0/+2
TID entries are used by hfi1 hardware to receive data payload from incoming packets directly into a user buffer and thus avoid data copying by software. This patch implements the functions for TID allocation, freeing, and programming TID RcvArray entries in hardware for kernel clients. TID entries are managed via lists of TID groups similar to PSM. Furthermore, to track TID resource allocation for each request, software flows are also allocated and freed as needed. Since software flows consume large amount of memory for tracking TID allocation and freeing, it is generally desirable to allocate them dynamically in the send queue and only for TID RDMA requests, but pre-allocate them for receive queue because the send queue could have thousands of entries while the receive queue has only a limited number of entries. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi: Move RC functions into a header fileKaike Wan1-0/+10
This patch moves some RC helper functions into a header file so that they can be called from both RC and TID RDMA functions. In addition, a common function for rewinding a request is created in rdmavt so that it can be shared between qib and hfi1 driver. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-03IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavtVenkata Sandeep Dhanalakota1-0/+1
This patch moves ruc_loopback() from hfi1 into rdmavt for code sharing with the qib driver. Reviewed-by: Brian Welty <brian.welty@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03IB/{hfi1, qib, rdmavt}: Move send completion logic to rdmavtVenkata Sandeep Dhanalakota1-0/+2
Moving send completion code into rdmavt in order to have shared logic between qib and hfi1 drivers. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03IB/{hfi1, qib, rdmavt}: Move copy SGE logic into rdmavtBrian Welty1-0/+4
This patch moves hfi1_copy_sge() into rdmavt for sharing with qib. This patch also moves all the wss_*() functions into rdmavt as several wss_*() functions are called from hfi1_copy_sge() When SGE copy mode is adaptive, cacheless copy may be done in some cases for performance reasons. In those cases, X86 cacheless copy function is called since the drivers that use rdmavt and may set SGE copy mode to adaptive are X86 only. For this reason, this patch adds "depends on X86_64" to rdmavt/Kconfig. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/rdmavt, IB/hfi1: Create device dependent s_flagsMike Marciniszyn1-13/+17
Move some s_flags defines out of rdmavt and into hfi1 because they are hfi1 specific and therefore should remain in the driver instead of bubbling up to rdmavt. Document device specific ranges in rdmavt and remap those in hfi1. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-09IB/{hfi1, qib, rdmavt}: Move logic to allocate receive WQE into rdmavtBrian Welty1-0/+1
Moving receive-side WQE allocation logic into rdmavt will allow further code reuse between qib and hfi1 drivers. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-04IB/rdmavt: Correct issues with read-mostly and send size cache linesSebastian Sanchez1-3/+3
The s_ahgpsn was incorrectly placed in the read-mostly section of the QP and the s_curr_size and s_hdrwords are oversized. The misplaced s_ahgpsn will cause the read-mostly cachelines to thrash. Place s_ahgpsn in the send side cache lines and correctly size and s_hdrwords and s_cur_size to keep the send side cachelines at the same size. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-28IB/rdmavt: Handle dereg of inuse MRs properlyMike Marciniszyn1-0/+1
A destroy of an MR prior to destroying the QP can cause the following diagnostic if the QP is referencing the MR being de-registered: hfi1 0000:05:00.0: hfi1_0: rvt_dereg_mr timeout mr ffff8808562108 00 pd ffff880859b20b00 The solution is to when the a non-zero refcount is encountered when the MR is destroyed the QPs needs to be iterated looking for QPs in the same PD as the MR. If rvt_qp_mr_clean() detects any such QP references the rkey/lkey, the QP needs to be put into an error state via a call to rvt_qp_error() which will trigger the clean up of any stuck references. This solution is as specified in IBTA 1.3 Volume 1 11.2.10.5. [This is reproduced with the 0.4.9 version of qperf and the rc_bw test] Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-28IB/rdmavt: Add QP iterator API for QPsMike Marciniszyn1-0/+29
There are currently 3 spots in the qib and hfi1 driver that have knowledge of the internal QP hash list that should only be in scope to rdmavt QP code. Add an iterator API for processing all QPs to hide the nature of the RCU hashlist. The API consists of: - rvt_qp_iter_init() * For iterating QPs one at a time for seq_file semantics - rvt_qp_iter_next() * For iterating QPs one at a time for seq_file semantics - rvt_qp_iter() * For iterating all QPs The first two are used for things like seq_file prints. The last is for code that just needs to iterate all QPs in the system. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hfi1: Remove pmtu from the QP structureSebastian Sanchez1-1/+0
The pmtu field doens't have be stored in the QP structure as it can easily be calculated when needed. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24Merge branch 'hfi1' into k.o/for-4.14Doug Ledford1-1/+1
2017-07-20IB/rdmavt: Setting of QP timeout can overflow jiffies computationKaike Wan1-0/+14
Current computation of qp->timeout_jiffies in rvt_modify_qp() will cause overflow due to the fact that the input to the function usecs_to_jiffies is only 32-bit ( unsigned int). Overflow will occur when attr->timeout is equal to or greater than 30. The consequence is unnecessarily excessive retry and thus degradation of the system performance. This patch fixes the problem by limiting the input to 5-bit and calling usecs_to_jiffies() before multiplying the scaling factor. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Add functions to parse BTH/IB headersDon Hiatt1-1/+1
Improve code readablity by adding inline functions to read specific BTH/IB fields without knowledge of byte offsets. Reviewed-by: Brian Welty <brian.welty@intel.com> Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1, IB/rdmavt: Move r_adefered to r_lock cache lineMike Marciniszyn1-0/+1
This field is causing excessive cache line bouncing. There are spare bytes in the r_lock cache line so the best approach is to make an rvt QP field and remove from the hfi1 priv field. Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Rename struct ib_ah_attr to rdma_ah_attrDasaratharaman Chandramouli1-2/+2
This patch simply renames struct ib_ah_attr to rdma_ah_attr as these fields specify attributes that are not necessarily specific to IB. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/rdmavt/hfi1/qib: Use the MGID and MLID for multicast addressingMichael J. Ruhl1-1/+6
The Infiniband spec defines "A multicast address is defined by a MGID and a MLID" (section 10.5). The current code only uses the MGID for identifying multicast groups. Update the driver to be compliant with this definition. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-05IB/rdmavt: Avoid reseting wqe send_flags in unreserveMike Marciniszyn1-3/+1
The wqe should be read only and in fact the superfluous reset of the RVT_SEND_RESERVE_USED flag causes an issue where reserved operations elicit a bad completion to the ULP. The maintenance of the flag is now entirely within rvt_post_one_wr() where a reserved operation will set the flag and a non-reserved operation will insure the operation that is about to be posted has the flag reset. Fixes: Commit 856cc4c237ad ("IB/hfi1: Add the capability for reserved operations") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-05IB/rdmavt, IB/hfi1, IB/qib: Make wc opcode translation driver dependentMike Marciniszyn1-1/+2
The work to create a completion helper moved the translation of send wqe operations to completion opcodes to rdmvat. This precludes having driver dependent operations. Make the translation driver dependent by doing the translation in the driver prior to the rvt_qp_swqe_complete() call using restored translation tables. Fixes: Commit f2dc9cdce83c ("IB/rdmavt: Add a send completion helper") Fixes: Commit 0771da5a6e9d ("IB/hfi1,IB/qib: Use new send completion helper") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, qib, rdmavt: Move AETH defines to rdma/ib_hdrs.hDon Hiatt1-5/+0
Rename RVT AETH defines and export in rdma/ib_hdrs.h Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Add rvt_rnr_tbl_to_usec functionDon Hiatt1-0/+1
Return usec from an index into ib_rvt_rnr_table. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/rdmavt, IB/hfi1, IB/qib: Correct ack count for passive (RTR) QPsMike Marciniszyn1-0/+2
The send complete for RC QPs mismanages the ack count when the responder side is only in RTR. A QP in that state cannot send requests, but it can be the target for operations that elicit responses. Adjust the RC completion logic to correct the count maintenance by reflecting RECV_OK in a new state test. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, rdmavt: Update copy_sge to use boolean argumentsBrian Welty1-0/+9
Convert copy_sge and related SGE state functions to use boolean. For determining if QP is in user mode, add helper function in rdmavt_qp.h. This is used to determine if QP needs the last byte ordering. While here, change rvt_pd.user to a boolean. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/rdmavt: Adding timer logic to rdmavtVenkata Sandeep Dhanalakota1-0/+6
To move common code across target to rdmavt for code reuse. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, qib, rdmavt: Move AETH credit functions into rdmavtBrian Welty1-0/+31
Add rvt_compute_aeth() and rvt_get_credit() as shared functions in rdmavt, moved from hfi1/qib logic. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, qib, rdmavt: Move two IB event functions into rdmavtBrian Welty1-0/+2
Add rvt_rc_error() and rvt_comm_est() as shared functions in rdmavt, moved from hfi1/qib logic. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 14:01:19 +0000